qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 37/49] target/arm: Reorganize PMCCNTR accesses
Date: Fri, 18 Jan 2019 14:57:53 +0000	[thread overview]
Message-ID: <20190118145805.6852-38-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190118145805.6852-1-peter.maydell@linaro.org>

From: Aaron Lindsay <aaron@os.amperecomputing.com>

pmccntr_read and pmccntr_write contained duplicate code that was already
being handled by pmccntr_sync. Consolidate the duplicated code into two
functions: pmccntr_op_start and pmccntr_op_finish. Add a companion to
c15_ccnt in CPUARMState so that we can simultaneously save both the
architectural register value and the last underlying cycle count - this
ensures time isn't lost and will also allow us to access the 'old'
architectural register value in order to detect overflows in later
patches.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181211151945.29137-3-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  37 +++++++++++---
 target/arm/helper.c | 118 ++++++++++++++++++++++++++------------------
 2 files changed, 100 insertions(+), 55 deletions(-)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 8512ca35528..2b743f7c178 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -473,10 +473,20 @@ typedef struct CPUARMState {
         uint64_t oslsr_el1; /* OS Lock Status */
         uint64_t mdcr_el2;
         uint64_t mdcr_el3;
-        /* If the counter is enabled, this stores the last time the counter
-         * was reset. Otherwise it stores the counter value
+        /* Stores the architectural value of the counter *the last time it was
+         * updated* by pmccntr_op_start. Accesses should always be surrounded
+         * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest
+         * architecturally-correct value is being read/set.
          */
         uint64_t c15_ccnt;
+        /* Stores the delta between the architectural value and the underlying
+         * cycle count during normal operation. It is used to update c15_ccnt
+         * to be the correct architectural value before accesses. During
+         * accesses, c15_ccnt_delta contains the underlying count being used
+         * for the access, after which it reverts to the delta value in
+         * pmccntr_op_finish.
+         */
+        uint64_t c15_ccnt_delta;
         uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */
         uint64_t vpidr_el2; /* Virtualization Processor ID Register */
         uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */
@@ -971,15 +981,26 @@ int cpu_arm_signal_handler(int host_signum, void *pinfo,
                            void *puc);
 
 /**
- * pmccntr_sync
+ * pmccntr_op_start/finish
  * @env: CPUARMState
  *
- * Synchronises the counter in the PMCCNTR. This must always be called twice,
- * once before any action that might affect the timer and again afterwards.
- * The function is used to swap the state of the register if required.
- * This only happens when not in user mode (!CONFIG_USER_ONLY)
+ * Convert the counter in the PMCCNTR between its delta form (the typical mode
+ * when it's enabled) and the guest-visible value. These two calls must always
+ * surround any action which might affect the counter.
  */
-void pmccntr_sync(CPUARMState *env);
+void pmccntr_op_start(CPUARMState *env);
+void pmccntr_op_finish(CPUARMState *env);
+
+/**
+ * pmu_op_start/finish
+ * @env: CPUARMState
+ *
+ * Convert all PMU counters between their delta form (the typical mode when
+ * they are enabled) and the guest-visible values. These two calls must
+ * surround any action which might affect the counters.
+ */
+void pmu_op_start(CPUARMState *env);
+void pmu_op_finish(CPUARMState *env);
 
 /* SCTLR bit meanings. Several bits have been reused in newer
  * versions of the architecture; in that case we define constants
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 46648ef8b68..c49e0d70cbb 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1085,28 +1085,63 @@ static inline bool arm_ccnt_enabled(CPUARMState *env)
 
     return true;
 }
-
-void pmccntr_sync(CPUARMState *env)
+/*
+ * Ensure c15_ccnt is the guest-visible count so that operations such as
+ * enabling/disabling the counter or filtering, modifying the count itself,
+ * etc. can be done logically. This is essentially a no-op if the counter is
+ * not enabled at the time of the call.
+ */
+void pmccntr_op_start(CPUARMState *env)
 {
-    uint64_t temp_ticks;
-
-    temp_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
+    uint64_t cycles = 0;
+    cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
                           ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
 
-    if (env->cp15.c9_pmcr & PMCRD) {
-        /* Increment once every 64 processor clock cycles */
-        temp_ticks /= 64;
-    }
-
     if (arm_ccnt_enabled(env)) {
-        env->cp15.c15_ccnt = temp_ticks - env->cp15.c15_ccnt;
+        uint64_t eff_cycles = cycles;
+        if (env->cp15.c9_pmcr & PMCRD) {
+            /* Increment once every 64 processor clock cycles */
+            eff_cycles /= 64;
+        }
+
+        env->cp15.c15_ccnt = eff_cycles - env->cp15.c15_ccnt_delta;
     }
+    env->cp15.c15_ccnt_delta = cycles;
+}
+
+/*
+ * If PMCCNTR is enabled, recalculate the delta between the clock and the
+ * guest-visible count. A call to pmccntr_op_finish should follow every call to
+ * pmccntr_op_start.
+ */
+void pmccntr_op_finish(CPUARMState *env)
+{
+    if (arm_ccnt_enabled(env)) {
+        uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
+
+        if (env->cp15.c9_pmcr & PMCRD) {
+            /* Increment once every 64 processor clock cycles */
+            prev_cycles /= 64;
+        }
+
+        env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt;
+    }
+}
+
+void pmu_op_start(CPUARMState *env)
+{
+    pmccntr_op_start(env);
+}
+
+void pmu_op_finish(CPUARMState *env)
+{
+    pmccntr_op_finish(env);
 }
 
 static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                        uint64_t value)
 {
-    pmccntr_sync(env);
+    pmu_op_start(env);
 
     if (value & PMCRC) {
         /* The counter has been reset */
@@ -1117,26 +1152,16 @@ static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     env->cp15.c9_pmcr &= ~0x39;
     env->cp15.c9_pmcr |= (value & 0x39);
 
-    pmccntr_sync(env);
+    pmu_op_finish(env);
 }
 
 static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
-    uint64_t total_ticks;
-
-    if (!arm_ccnt_enabled(env)) {
-        /* Counter is disabled, do not change value */
-        return env->cp15.c15_ccnt;
-    }
-
-    total_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                           ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-
-    if (env->cp15.c9_pmcr & PMCRD) {
-        /* Increment once every 64 processor clock cycles */
-        total_ticks /= 64;
-    }
-    return total_ticks - env->cp15.c15_ccnt;
+    uint64_t ret;
+    pmccntr_op_start(env);
+    ret = env->cp15.c15_ccnt;
+    pmccntr_op_finish(env);
+    return ret;
 }
 
 static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1153,22 +1178,9 @@ static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
-    uint64_t total_ticks;
-
-    if (!arm_ccnt_enabled(env)) {
-        /* Counter is disabled, set the absolute value */
-        env->cp15.c15_ccnt = value;
-        return;
-    }
-
-    total_ticks = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                           ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-
-    if (env->cp15.c9_pmcr & PMCRD) {
-        /* Increment once every 64 processor clock cycles */
-        total_ticks /= 64;
-    }
-    env->cp15.c15_ccnt = total_ticks - value;
+    pmccntr_op_start(env);
+    env->cp15.c15_ccnt = value;
+    pmccntr_op_finish(env);
 }
 
 static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1181,7 +1193,19 @@ static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri,
 
 #else /* CONFIG_USER_ONLY */
 
-void pmccntr_sync(CPUARMState *env)
+void pmccntr_op_start(CPUARMState *env)
+{
+}
+
+void pmccntr_op_finish(CPUARMState *env)
+{
+}
+
+void pmu_op_start(CPUARMState *env)
+{
+}
+
+void pmu_op_finish(CPUARMState *env)
 {
 }
 
@@ -1190,9 +1214,9 @@ void pmccntr_sync(CPUARMState *env)
 static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
-    pmccntr_sync(env);
+    pmccntr_op_start(env);
     env->cp15.pmccfiltr_el0 = value & 0xfc000000;
-    pmccntr_sync(env);
+    pmccntr_op_finish(env);
 }
 
 static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
-- 
2.20.1

  parent reply	other threads:[~2019-01-18 14:58 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-18 14:57 [Qemu-devel] [PULL 00/49] target-arm queue Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 01/49] hw/char/stm32f2xx_usart: Do not update data register when device is disabled Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 02/49] hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 03/49] target/arm: Allow Aarch32 exception return to switch from Mon->Hyp Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 04/49] ftgmac100: implement the new MDIO interface on Aspeed SoC Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 05/49] target/arm: Add state for the ARMv8.3-PAuth extension Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 06/49] target/arm: Add SCTLR bits through ARMv8.5 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 07/49] target/arm: Add PAuth active bit to tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 08/49] target/arm: Introduce raise_exception_ra Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 09/49] target/arm: Add PAuth helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 10/49] target/arm: Decode PAuth within system hint space Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 11/49] target/arm: Rearrange decode in disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 12/49] target/arm: Decode PAuth within disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 13/49] target/arm: Decode PAuth within disas_data_proc_2src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 14/49] target/arm: Move helper_exception_return to helper-a64.c Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 15/49] target/arm: Add new_pc argument to helper_exception_return Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 16/49] target/arm: Rearrange decode in disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 17/49] target/arm: Decode PAuth within disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 18/49] target/arm: Decode Load/store register (pac) Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 19/49] target/arm: Move cpu_mmu_index out of line Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 20/49] target/arm: Introduce arm_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 21/49] target/arm: Introduce arm_stage1_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 22/49] target/arm: Create ARMVAParameters and helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 23/49] target/arm: Merge TBFLAG_AA_TB{0, 1} to TBII Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 24/49] target/arm: Export aa64_va_parameters to internals.h Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 25/49] target/arm: Add aa64_va_parameters_both Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 26/49] target/arm: Decode TBID from TCR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 27/49] target/arm: Reuse aa64_va_parameters for setting tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 28/49] target/arm: Implement pauth_strip Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 29/49] target/arm: Implement pauth_auth Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 30/49] target/arm: Implement pauth_addpac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 31/49] target/arm: Implement pauth_computepac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 32/49] target/arm: Add PAuth system registers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 33/49] target/arm: Enable PAuth for -cpu max Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 34/49] target/arm: Enable PAuth for user-only Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 35/49] target/arm: Tidy TBI handling in gen_a64_set_pc Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 36/49] migration: Add post_save function to VMStateDescription Peter Maydell
2019-01-18 14:57 ` Peter Maydell [this message]
2019-01-18 14:57 ` [Qemu-devel] [PULL 38/49] target/arm: Swap PMU values before/after migrations Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 39/49] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Peter Maydell
2020-08-24 16:33   ` Peter Maydell
2020-08-25 14:41     ` Aaron Lindsay
2020-08-25 14:48     ` [PATCH] target/arm: Count PMU events when MDCR.SPME is set Aaron Lindsay
2020-09-11 14:13       ` Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 40/49] target/arm: Allow AArch32 access for PMCCFILTR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 41/49] target/arm: Implement PMOVSSET Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 42/49] target/arm: Define FIELDs for ID_DFR0 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 43/49] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 44/49] target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 45/49] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 46/49] target/arm: PMU: Add instruction and cycle events Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 47/49] target/arm: PMU: Set PMCR.N to 4 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 48/49] target/arm: Implement PMSWINC Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 49/49] tests/libqtest: Introduce qtest_init_with_serial() Peter Maydell
2019-01-31 17:48 ` [Qemu-devel] [PULL 00/49] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190118145805.6852-38-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).