From: Greg Kurz <groug@kaod.org>
To: "Cédric Le Goater" <clg@kaod.org>
Cc: qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
David Gibson <david@gibson.dropbear.id.au>
Subject: Re: [PATCH 4/9] ppc/xive2: Introduce a presenter matching routine
Date: Wed, 20 May 2020 19:17:01 +0200 [thread overview]
Message-ID: <20200520191701.21dd0525@bahia.lan> (raw)
In-Reply-To: <20200513151109.453530-5-clg@kaod.org>
On Wed, 13 May 2020 17:11:04 +0200
Cédric Le Goater <clg@kaod.org> wrote:
> The VP space is larger in XIVE2 (P10), 24 bits instead of 19bits on
> XIVE (P9), and the CAM line can use a 7bits or 8bits thread id.
>
> For now, we only use 7bits thread ids, same as P9, but because of the
> change of the size of the VP space, the CAM matching routine is
> different between P9 and P10. It is easier to duplicate the whole
> routine than to add extra handlers in xive_presenter_tctx_match() used
> for P9.
>
It's a bit of a pity to duplicate this routine. What about turning it
into a helper with some extra arguments and come up with dedicated
users for P9 and P10 ?
> We might come with a better solution later on, after we have added
> some more support for the XIVE2 controller.
>
Of course if you envision substantial changes that would prevent to share
enough logic, you can ignore the previous comment. The duplicated routine
looks fine.
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
> include/hw/ppc/xive2.h | 9 +++++
> hw/intc/xive2.c | 87 ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 96 insertions(+)
>
> diff --git a/include/hw/ppc/xive2.h b/include/hw/ppc/xive2.h
> index cb15487efdb6..4aefca4d96f1 100644
> --- a/include/hw/ppc/xive2.h
> +++ b/include/hw/ppc/xive2.h
> @@ -60,6 +60,15 @@ int xive2_router_write_nvp(Xive2Router *xrtr, uint8_t nvt_blk, uint32_t nvt_idx,
>
> void xive2_router_notify(XiveNotifier *xn, uint32_t lisn);
>
> +/*
> + * XIVE2 Presenter (POWER10)
> + */
> +
> +int xive2_presenter_tctx_match(XivePresenter *xptr, XiveTCTX *tctx,
> + uint8_t format,
> + uint8_t nvt_blk, uint32_t nvt_idx,
> + bool cam_ignore, uint32_t logic_serv);
> +
> /*
> * XIVE2 END ESBs (POWER10)
> */
> diff --git a/hw/intc/xive2.c b/hw/intc/xive2.c
> index 15ea04cf1822..1ce9d995e990 100644
> --- a/hw/intc/xive2.c
> +++ b/hw/intc/xive2.c
> @@ -20,6 +20,11 @@
> #include "hw/ppc/xive2.h"
> #include "hw/ppc/xive2_regs.h"
>
> +static inline uint32_t xive_tctx_word2(uint8_t *ring)
> +{
> + return *((uint32_t *) &ring[TM_WORD2]);
> +}
> +
> static uint8_t priority_to_ipb(uint8_t priority)
> {
> return priority > XIVE_PRIORITY_MAX ?
> @@ -212,6 +217,88 @@ static int xive2_router_get_block_id(Xive2Router *xrtr)
> return xrc->get_block_id(xrtr);
> }
>
> +/*
> + * Encode the HW CAM line with 7bit or 8bit thread id. The thread id
> + * width and block id width is configurable at the IC level.
> + *
> + * chipid << 19 | 0000000 0 0001 threadid (7Bit)
> + * chipid << 24 | 0000 0000 0000 0001 threadid (8Bit)
> + */
What about introducing:
#define XIVE2_PIR_TO_NVP_IDX(pir, width) \
(1 << (width) | ((pir) & ((1 << (width)) - 1))
or any better name you can think of and...
> +static uint32_t xive2_tctx_hw_cam_line(XivePresenter *xptr, XiveTCTX *tctx)
> +{
> + Xive2Router *xrtr = XIVE2_ROUTER(xptr);
> + CPUPPCState *env = &POWERPC_CPU(tctx->cs)->env;
> + uint32_t pir = env->spr_cb[SPR_PIR].default_value;
> + uint8_t blk = xive2_router_get_block_id(xrtr);
> + uint8_t tid_shift = 7;
> + uint8_t tid_mask = (1 << tid_shift) - 1;
> +
> + return xive2_nvp_cam_line(blk, 1 << tid_shift | (pir & tid_mask));
... turn this into:
/* We only use 7bit thread ids for now */
return xive2_nvp_cam_line(blk, XIVE2_PIR_TO_NVP_IDX(pir, 7));
> +}
> +
> +/*
> + * The thread context register words are in big-endian format.
> + */
> +int xive2_presenter_tctx_match(XivePresenter *xptr, XiveTCTX *tctx,
> + uint8_t format,
> + uint8_t nvt_blk, uint32_t nvt_idx,
> + bool cam_ignore, uint32_t logic_serv)
> +{
> + uint32_t cam = xive2_nvp_cam_line(nvt_blk, nvt_idx);
> + uint32_t qw3w2 = xive_tctx_word2(&tctx->regs[TM_QW3_HV_PHYS]);
> + uint32_t qw2w2 = xive_tctx_word2(&tctx->regs[TM_QW2_HV_POOL]);
> + uint32_t qw1w2 = xive_tctx_word2(&tctx->regs[TM_QW1_OS]);
> + uint32_t qw0w2 = xive_tctx_word2(&tctx->regs[TM_QW0_USER]);
> +
> + /*
> + * TODO (PowerNV): ignore mode. The low order bits of the NVT
> + * identifier are ignored in the "CAM" match.
> + */
> +
> + if (format == 0) {
> + if (cam_ignore == true) {
> + /*
> + * F=0 & i=1: Logical server notification (bits ignored at
> + * the end of the NVT identifier)
> + */
> + qemu_log_mask(LOG_UNIMP, "XIVE: no support for LS NVT %x/%x\n",
> + nvt_blk, nvt_idx);
> + return -1;
> + }
> +
> + /* F=0 & i=0: Specific NVT notification */
> +
> + /* PHYS ring */
> + if ((be32_to_cpu(qw3w2) & TM2_QW3W2_VT) &&
> + cam == xive2_tctx_hw_cam_line(xptr, tctx)) {
> + return TM_QW3_HV_PHYS;
> + }
> +
> + /* HV POOL ring */
> + if ((be32_to_cpu(qw2w2) & TM2_QW2W2_VP) &&
> + cam == xive_get_field32(TM2_QW2W2_POOL_CAM, qw2w2)) {
> + return TM_QW2_HV_POOL;
> + }
> +
> + /* OS ring */
> + if ((be32_to_cpu(qw1w2) & TM2_QW1W2_VO) &&
> + cam == xive_get_field32(TM2_QW1W2_OS_CAM, qw1w2)) {
> + return TM_QW1_OS;
> + }
> + } else {
> + /* F=1 : User level Event-Based Branch (EBB) notification */
> +
> + /* USER ring */
> + if ((be32_to_cpu(qw1w2) & TM2_QW1W2_VO) &&
> + (cam == xive_get_field32(TM2_QW1W2_OS_CAM, qw1w2)) &&
> + (be32_to_cpu(qw0w2) & TM2_QW0W2_VU) &&
> + (logic_serv == xive_get_field32(TM2_QW0W2_LOGIC_SERV, qw0w2))) {
> + return TM_QW0_USER;
> + }
> + }
> + return -1;
> +}
> +
> static void xive2_router_realize(DeviceState *dev, Error **errp)
> {
> Xive2Router *xrtr = XIVE2_ROUTER(dev);
next prev parent reply other threads:[~2020-05-20 17:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-13 15:11 [PATCH 0/9] ppc/pnv: Introduce the XIVE2 and PHB5 controllers for the POWER10 chip Cédric Le Goater
2020-05-13 15:11 ` [PATCH 1/9] ppc/xive: Export PQ get/set routines Cédric Le Goater
2020-05-13 15:11 ` [PATCH 2/9] ppc/xive: Export xive_presenter_notify() Cédric Le Goater
2020-05-19 9:18 ` Greg Kurz
2020-05-13 15:11 ` [PATCH 3/9] ppc/xive2: Introduce a XIVE2 core framework Cédric Le Goater
2020-05-20 16:40 ` Greg Kurz
2020-05-25 11:41 ` Cédric Le Goater
2020-05-13 15:11 ` [PATCH 4/9] ppc/xive2: Introduce a presenter matching routine Cédric Le Goater
2020-05-20 17:17 ` Greg Kurz [this message]
2020-05-25 12:11 ` Cédric Le Goater
2020-05-20 17:20 ` Greg Kurz
2020-05-13 15:11 ` [PATCH 5/9] ppc/pnv: Add a XIVE2 controller to the POWER10 chip Cédric Le Goater
2020-05-19 9:48 ` Greg Kurz
2020-05-25 10:12 ` Cédric Le Goater
2020-05-13 15:11 ` [PATCH 6/9] ppc/pnv: Add a OCC model for POWER10 Cédric Le Goater
2020-05-20 14:22 ` Greg Kurz
2020-05-25 11:14 ` Cédric Le Goater
2020-05-13 15:11 ` [PATCH 7/9] ppc/pnv: Add POWER10 quads Cédric Le Goater
2020-05-20 14:44 ` Greg Kurz
2020-05-25 11:27 ` Cédric Le Goater
2020-05-13 15:11 ` [PATCH 8/9] ppc/pnv: Add model for POWER9 PHB5 PCIe Host bridge Cédric Le Goater
2020-05-20 13:46 ` Greg Kurz
2020-05-25 10:13 ` Cédric Le Goater
2020-05-13 15:11 ` [PATCH 9/9] ppc/psi: Add support for StoreEOI and 64k ESB pages (POWER10) Cédric Le Goater
2020-05-19 9:40 ` [PATCH 0/9] ppc/pnv: Introduce the XIVE2 and PHB5 controllers for the POWER10 chip Greg Kurz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200520191701.21dd0525@bahia.lan \
--to=groug@kaod.org \
--cc=clg@kaod.org \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).