qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-block@nongnu.org
Cc: fam@euphon.net, kwolf@redhat.com, vsementsov@virtuozzo.com,
	berto@igalia.com, qemu-devel@nongnu.org, mreitz@redhat.com,
	stefanha@redhat.com, den@openvz.org
Subject: [PATCH v4 13/16] block/io: support int64_t bytes in bdrv_aligned_preadv()
Date: Fri, 11 Dec 2020 21:39:31 +0300	[thread overview]
Message-ID: <20201211183934.169161-14-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <20201211183934.169161-1-vsementsov@virtuozzo.com>

We are generally moving to int64_t for both offset and bytes parameters
on all io paths.

Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.

We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).

So, prepare bdrv_aligned_preadv() now.

Make byte variable in bdrv_padding_rmw_read() int64_t, as it defined
only to be passed to bdrv_aligned_preadv().

All bdrv_aligned_preadv() callers are safe as type is widening. Let's
look inside:

 - add a new-style assertion that request is good.
 - callees bdrv_is_allocated(), bdrv_co_do_copy_on_readv() supports
   int64_t bytes
 - conversion of bytes_remaining is OK, as we never has requests
   overflowing BDRV_MAX_LENGTH
 - looping through bytes_remaining is ok, num is updated to int64_t
   - for bdrv_driver_preadv we have same limit of max_transfer
   - qemu_iovec_memset is OK, as bytes+qiov_offset should not overflow
     qiov->size anyway (thanks to bdrv_check_qiov_request())

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
 block/io.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/block/io.c b/block/io.c
index d8c07fac56..93a89a56e3 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1453,15 +1453,16 @@ err:
  * reads; any other features must be implemented by the caller.
  */
 static int coroutine_fn bdrv_aligned_preadv(BdrvChild *child,
-    BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
+    BdrvTrackedRequest *req, int64_t offset, int64_t bytes,
     int64_t align, QEMUIOVector *qiov, size_t qiov_offset, int flags)
 {
     BlockDriverState *bs = child->bs;
     int64_t total_bytes, max_bytes;
     int ret = 0;
-    uint64_t bytes_remaining = bytes;
+    int64_t bytes_remaining = bytes;
     int max_transfer;
 
+    bdrv_check_qiov_request(offset, bytes, qiov, qiov_offset, &error_abort);
     assert(is_power_of_2(align));
     assert((offset & (align - 1)) == 0);
     assert((bytes & (align - 1)) == 0);
@@ -1518,7 +1519,7 @@ static int coroutine_fn bdrv_aligned_preadv(BdrvChild *child,
     }
 
     while (bytes_remaining) {
-        int num;
+        int64_t num;
 
         if (max_bytes) {
             num = MIN(bytes_remaining, MIN(max_bytes, max_transfer));
@@ -1624,7 +1625,7 @@ static int bdrv_padding_rmw_read(BdrvChild *child,
     assert(req->serialising && pad->buf);
 
     if (pad->head || pad->merge_reads) {
-        uint64_t bytes = pad->merge_reads ? pad->buf_len : align;
+        int64_t bytes = pad->merge_reads ? pad->buf_len : align;
 
         qemu_iovec_init_buf(&local_qiov, pad->buf, bytes);
 
-- 
2.25.4



  parent reply	other threads:[~2020-12-11 19:06 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-11 18:39 [PATCH v4 00/16] 64bit block-layer: part I Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 01/16] block: refactor bdrv_check_request: add errp Vladimir Sementsov-Ogievskiy
2021-01-20 22:20   ` Eric Blake
2021-01-22 19:33   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 02/16] util/iov: make qemu_iovec_init_extended() honest Vladimir Sementsov-Ogievskiy
2021-01-21 21:58   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 03/16] block: fix theoretical overflow in bdrv_init_padding() Vladimir Sementsov-Ogievskiy
2021-01-21 22:42   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 04/16] block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up Vladimir Sementsov-Ogievskiy
2021-01-21 22:50   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 05/16] block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure Vladimir Sementsov-Ogievskiy
2021-01-21 22:53   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 06/16] block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 07/16] block/io: improve bdrv_check_request: check qiov too Vladimir Sementsov-Ogievskiy
2021-01-22 14:48   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 08/16] block: use int64_t as bytes type in tracked requests Vladimir Sementsov-Ogievskiy
2021-01-22 14:50   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 09/16] block/io: use int64_t bytes in driver wrappers Vladimir Sementsov-Ogievskiy
2021-01-22 16:02   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 10/16] block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes() Vladimir Sementsov-Ogievskiy
2021-01-22 16:18   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 11/16] block/io: support int64_t bytes in bdrv_aligned_pwritev() Vladimir Sementsov-Ogievskiy
2021-01-22 16:26   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 12/16] block/io: support int64_t bytes in bdrv_co_do_copy_on_readv() Vladimir Sementsov-Ogievskiy
2021-01-22 16:34   ` Eric Blake
2020-12-11 18:39 ` Vladimir Sementsov-Ogievskiy [this message]
2021-01-22 16:54   ` [PATCH v4 13/16] block/io: support int64_t bytes in bdrv_aligned_preadv() Eric Blake
2021-01-23 14:34     ` Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 14/16] block/io: support int64_t bytes in bdrv_co_p{read, write}v_part() Vladimir Sementsov-Ogievskiy via
2021-01-22 17:00   ` [PATCH v4 14/16] block/io: support int64_t bytes in bdrv_co_p{read,write}v_part() Eric Blake
2020-12-11 18:39 ` [PATCH v4 15/16] block/io: support int64_t bytes in read/write wrappers Vladimir Sementsov-Ogievskiy
2021-01-22 17:22   ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 16/16] block/io: use int64_t bytes in copy_range Vladimir Sementsov-Ogievskiy
2021-01-22 18:29   ` Eric Blake
2020-12-14 11:51 ` [PATCH v4 00/16] 64bit block-layer: part I Vladimir Sementsov-Ogievskiy
2021-01-09 10:13 ` Vladimir Sementsov-Ogievskiy
2021-02-02  2:56 ` Eric Blake
2021-02-02  6:50   ` Vladimir Sementsov-Ogievskiy
2021-02-02 14:59   ` Eric Blake
2021-02-02 16:13   ` iotest failures in head [was: [PATCH v4 00/16] 64bit block-layer: part I] Eric Blake
2021-02-02 16:23     ` Kevin Wolf
2021-02-02 16:29       ` Vladimir Sementsov-Ogievskiy
2021-02-02 18:50         ` Vladimir Sementsov-Ogievskiy
2021-02-02 22:47         ` Peter Maydell
2021-02-03 10:45           ` Peter Maydell
2021-02-04 15:18             ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201211183934.169161-14-vsementsov@virtuozzo.com \
    --to=vsementsov@virtuozzo.com \
    --cc=berto@igalia.com \
    --cc=den@openvz.org \
    --cc=fam@euphon.net \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).