From: Eric Blake <eblake@redhat.com>
To: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>,
qemu-block@nongnu.org
Cc: fam@euphon.net, kwolf@redhat.com, qemu-devel@nongnu.org,
mreitz@redhat.com, stefanha@redhat.com, den@openvz.org
Subject: iotest failures in head [was: [PATCH v4 00/16] 64bit block-layer: part I]
Date: Tue, 2 Feb 2021 10:13:09 -0600 [thread overview]
Message-ID: <9e71568c-ce4a-f844-fbd3-a4a59f850d74@redhat.com> (raw)
In-Reply-To: <81abe7dc-6053-72d2-ddf7-352dc21e75b6@redhat.com>
On 2/1/21 8:56 PM, Eric Blake wrote:
> I had planned to send a pull request for this series today, but ran into
> a snag. Without this series applied, './check -qcow2' fails 030, 185,
> and 297.
297 appears to be fixed once Kevin's pull request lands (well, that may
be needing a v2). 185 appears to be just a whitespace difference that
missed fixing in 362ef77f9 and similar:
--- /home/eblake/qemu/tests/qemu-iotests/185.out
+++ 185.out.bad
@@ -89,7 +89,7 @@
'format': 'IMGFMT',
'sync': 'full',
'speed': 65536,
- 'x-perf': { 'max-chunk': 65536 } } }
+ 'x-perf': {'max-chunk': 65536} } }
030 is a bit tougher to figure out.
030 fail [09:40:32] [09:40:48] 16.9s (last: 15.4s) failed,
exit status 1
--- /home/eblake/qemu/tests/qemu-iotests/030.out
+++ 030.out.bad
@@ -1,5 +1,45 @@
-...........................
+WARNING:qemu.machine:qemu received signal 11; command:
"/home/eblake/qemu/build/tests/qemu-iotests/../../qemu-system-x86_64
-display none -vga none -chardev
socket,id=mon,path=/tmp/tmpedy9c_uf/qemu-421866-monitor.sock -mon
chardev=mon,mode=control -qtest
unix:path=/tmp/tmpedy9c_uf/qemu-421866-qtest.sock -accel qtest
-nodefaults -display none -accel qtest -drive
if=virtio,id=drive0,file=/home/eblake/qemu/build/tests/qemu-iotests/scratch/img-8.img,format=qcow2,cache=writeback,aio=threads,backing.backing.backing.backing.backing.backing.backing.backing.node-name=node0,backing.backing.backing.backing.backing.backing.backing.node-name=node1,backing.backing.backing.backing.backing.backing.node-name=node2,backing.backing.backing.backing.backing.node-name=node3,backing.backing.backing.backing.node-name=node4,backing.backing.backing.node-name=node5,backing.backing.node-name=node6,backing.node-name=node7,node-name=node8"
+.............EE.............
+======================================================================
+ERROR: test_stream_parallel (__main__.TestParallelOps)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "/home/eblake/qemu/tests/qemu-iotests/030", line 260, in
test_stream_parallel
+ for event in self.vm.get_qmp_events(wait=True):
+ File
"/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/machine.py",
line 585, in get_qmp_events
+ events = self._qmp.get_events(wait=wait)
+ File "/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/qmp.py",
line 328, in get_events
+ self.__get_events(wait)
+ File "/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/qmp.py",
line 197, in __get_events
+ raise QMPConnectError("Error while reading from socket")
+qemu.qmp.QMPConnectError: Error while reading from socket
+
+======================================================================
+ERROR: test_stream_parallel (__main__.TestParallelOps)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File
"/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/machine.py",
line 477, in _do_shutdown
+ self._soft_shutdown(timeout, has_quit)
+ File
"/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/machine.py",
line 457, in _soft_shutdown
+ self._qmp.cmd('quit')
+ File "/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/qmp.py",
line 278, in cmd
+ return self.cmd_obj(qmp_cmd)
+ File "/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/qmp.py",
line 256, in cmd_obj
+ self.__sock.sendall(json.dumps(qmp_cmd).encode('utf-8'))
+BrokenPipeError: [Errno 32] Broken pipe
+
+The above exception was the direct cause of the following exception:
+
+Traceback (most recent call last):
+ File "/home/eblake/qemu/tests/qemu-iotests/030", line 227, in tearDown
+ self.vm.shutdown()
+ File
"/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/machine.py",
line 507, in shutdown
+ self._do_shutdown(timeout, has_quit)
+ File
"/home/eblake/qemu/tests/qemu-iotests/../../python/qemu/machine.py",
line 480, in _do_shutdown
+ raise AbnormalShutdown("Could not perform graceful shutdown") \
+qemu.machine.AbnormalShutdown: Could not perform graceful shutdown
+
----------------------------------------------------------------------
Ran 27 tests
-OK
+FAILED (errors=2)
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
next prev parent reply other threads:[~2021-02-02 16:22 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 18:39 [PATCH v4 00/16] 64bit block-layer: part I Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 01/16] block: refactor bdrv_check_request: add errp Vladimir Sementsov-Ogievskiy
2021-01-20 22:20 ` Eric Blake
2021-01-22 19:33 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 02/16] util/iov: make qemu_iovec_init_extended() honest Vladimir Sementsov-Ogievskiy
2021-01-21 21:58 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 03/16] block: fix theoretical overflow in bdrv_init_padding() Vladimir Sementsov-Ogievskiy
2021-01-21 22:42 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 04/16] block/io: refactor bdrv_pad_request(): move bdrv_pad_request() up Vladimir Sementsov-Ogievskiy
2021-01-21 22:50 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 05/16] block/io: bdrv_pad_request(): support qemu_iovec_init_extended failure Vladimir Sementsov-Ogievskiy
2021-01-21 22:53 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 06/16] block/throttle-groups: throttle_group_co_io_limits_intercept(): 64bit bytes Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 07/16] block/io: improve bdrv_check_request: check qiov too Vladimir Sementsov-Ogievskiy
2021-01-22 14:48 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 08/16] block: use int64_t as bytes type in tracked requests Vladimir Sementsov-Ogievskiy
2021-01-22 14:50 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 09/16] block/io: use int64_t bytes in driver wrappers Vladimir Sementsov-Ogievskiy
2021-01-22 16:02 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 10/16] block/io: support int64_t bytes in bdrv_co_do_pwrite_zeroes() Vladimir Sementsov-Ogievskiy
2021-01-22 16:18 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 11/16] block/io: support int64_t bytes in bdrv_aligned_pwritev() Vladimir Sementsov-Ogievskiy
2021-01-22 16:26 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 12/16] block/io: support int64_t bytes in bdrv_co_do_copy_on_readv() Vladimir Sementsov-Ogievskiy
2021-01-22 16:34 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 13/16] block/io: support int64_t bytes in bdrv_aligned_preadv() Vladimir Sementsov-Ogievskiy
2021-01-22 16:54 ` Eric Blake
2021-01-23 14:34 ` Vladimir Sementsov-Ogievskiy
2020-12-11 18:39 ` [PATCH v4 14/16] block/io: support int64_t bytes in bdrv_co_p{read, write}v_part() Vladimir Sementsov-Ogievskiy via
2021-01-22 17:00 ` [PATCH v4 14/16] block/io: support int64_t bytes in bdrv_co_p{read,write}v_part() Eric Blake
2020-12-11 18:39 ` [PATCH v4 15/16] block/io: support int64_t bytes in read/write wrappers Vladimir Sementsov-Ogievskiy
2021-01-22 17:22 ` Eric Blake
2020-12-11 18:39 ` [PATCH v4 16/16] block/io: use int64_t bytes in copy_range Vladimir Sementsov-Ogievskiy
2021-01-22 18:29 ` Eric Blake
2020-12-14 11:51 ` [PATCH v4 00/16] 64bit block-layer: part I Vladimir Sementsov-Ogievskiy
2021-01-09 10:13 ` Vladimir Sementsov-Ogievskiy
2021-02-02 2:56 ` Eric Blake
2021-02-02 6:50 ` Vladimir Sementsov-Ogievskiy
2021-02-02 14:59 ` Eric Blake
2021-02-02 16:13 ` Eric Blake [this message]
2021-02-02 16:23 ` iotest failures in head [was: [PATCH v4 00/16] 64bit block-layer: part I] Kevin Wolf
2021-02-02 16:29 ` Vladimir Sementsov-Ogievskiy
2021-02-02 18:50 ` Vladimir Sementsov-Ogievskiy
2021-02-02 22:47 ` Peter Maydell
2021-02-03 10:45 ` Peter Maydell
2021-02-04 15:18 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e71568c-ce4a-f844-fbd3-a4a59f850d74@redhat.com \
--to=eblake@redhat.com \
--cc=den@openvz.org \
--cc=fam@euphon.net \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@virtuozzo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).