qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 12/21] hw/ssi: imx_spi: Round up the burst length to be multiple of 8
Date: Tue,  2 Feb 2021 17:55:08 +0000	[thread overview]
Message-ID: <20210202175517.28729-13-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210202175517.28729-1-peter.maydell@linaro.org>

From: Bin Meng <bin.meng@windriver.com>

Current implementation of the imx spi controller expects the burst
length to be multiple of 8, which is the most common use case.

In case the burst length is not what we expect, log it to give user
a chance to notice it, and round it up to be multiple of 8.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20210129132323.30946-9-bmeng.cn@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/ssi/imx_spi.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/hw/ssi/imx_spi.c b/hw/ssi/imx_spi.c
index 2fb65498c3b..41fe199c9f1 100644
--- a/hw/ssi/imx_spi.c
+++ b/hw/ssi/imx_spi.c
@@ -128,7 +128,14 @@ static uint8_t imx_spi_selected_channel(IMXSPIState *s)
 
 static uint32_t imx_spi_burst_length(IMXSPIState *s)
 {
-    return EXTRACT(s->regs[ECSPI_CONREG], ECSPI_CONREG_BURST_LENGTH) + 1;
+    uint32_t burst;
+
+    burst = EXTRACT(s->regs[ECSPI_CONREG], ECSPI_CONREG_BURST_LENGTH) + 1;
+    if (burst % 8) {
+        burst = ROUND_UP(burst, 8);
+    }
+
+    return burst;
 }
 
 static bool imx_spi_is_enabled(IMXSPIState *s)
@@ -328,6 +335,7 @@ static void imx_spi_write(void *opaque, hwaddr offset, uint64_t value,
     IMXSPIState *s = opaque;
     uint32_t index = offset >> 2;
     uint32_t change_mask;
+    uint32_t burst;
 
     if (index >=  ECSPI_MAX) {
         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
@@ -380,6 +388,13 @@ static void imx_spi_write(void *opaque, hwaddr offset, uint64_t value,
     case ECSPI_CONREG:
         s->regs[ECSPI_CONREG] = value;
 
+        burst = EXTRACT(s->regs[ECSPI_CONREG], ECSPI_CONREG_BURST_LENGTH) + 1;
+        if (burst % 8) {
+            qemu_log_mask(LOG_UNIMP,
+                          "[%s]%s: burst length %d not supported: rounding up to next multiple of 8\n",
+                          TYPE_IMX_SPI, __func__, burst);
+        }
+
         if (!imx_spi_is_enabled(s)) {
             /* device is disabled, so this is a soft reset */
             imx_spi_soft_reset(s);
-- 
2.20.1



  parent reply	other threads:[~2021-02-02 18:12 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-02 17:54 [PULL 00/21] target-arm queue Peter Maydell
2021-02-02 17:54 ` [PULL 01/21] hw/intc/arm_gic: Allow to use QTest without crashing Peter Maydell
2021-02-02 17:54 ` [PULL 02/21] hw/char/exynos4210_uart: Fix buffer size reporting with FIFO disabled Peter Maydell
2021-02-02 17:54 ` [PULL 03/21] hw/char/exynos4210_uart: Fix missing call to report ready for input Peter Maydell
2021-02-02 17:55 ` [PULL 04/21] hw/arm/smmuv3: Fix addr_mask for range-based invalidation Peter Maydell
2021-02-02 17:55 ` [PULL 05/21] hw/ssi: imx_spi: Use a macro for number of chip selects supported Peter Maydell
2021-02-02 17:55 ` [PULL 06/21] hw/ssi: imx_spi: Remove imx_spi_update_irq() in imx_spi_reset() Peter Maydell
2021-02-02 17:55 ` [PULL 07/21] hw/ssi: imx_spi: Remove pointless variable initialization Peter Maydell
2021-02-02 17:55 ` [PULL 08/21] hw/ssi: imx_spi: Rework imx_spi_reset() to keep CONREG register value Peter Maydell
2021-02-02 17:55 ` [PULL 09/21] hw/ssi: imx_spi: Rework imx_spi_read() to handle block disabled Peter Maydell
2021-02-02 17:55 ` [PULL 10/21] hw/ssi: imx_spi: Rework imx_spi_write() " Peter Maydell
2021-02-02 17:55 ` [PULL 11/21] hw/ssi: imx_spi: Disable chip selects when controller is disabled Peter Maydell
2021-02-02 17:55 ` Peter Maydell [this message]
2021-02-02 17:55 ` [PULL 13/21] hw/ssi: imx_spi: Correct the burst length > 32 bit transfer logic Peter Maydell
2021-02-02 17:55 ` [PULL 14/21] hw/ssi: imx_spi: Correct tx and rx fifo endianness Peter Maydell
2021-02-02 17:55 ` [PULL 15/21] hw/intc/arm_gic: Fix interrupt ID in GICD_SGIR register Peter Maydell
2021-02-02 17:55 ` [PULL 16/21] hw/arm/stm32f405_soc: Add missing dependency on OR_IRQ Peter Maydell
2021-02-02 17:55 ` [PULL 17/21] hw/arm/exynos4210: " Peter Maydell
2021-02-02 17:55 ` [PULL 18/21] hw/arm/xlnx-versal: Versal SoC requires ZDMA Peter Maydell
2021-02-02 17:55 ` [PULL 19/21] hw/arm/xlnx-versal: Versal SoC requires ZynqMP peripherals Peter Maydell
2021-02-02 17:55 ` [PULL 20/21] hw/net/can: ZynqMP CAN device requires PTIMER Peter Maydell
2021-02-02 17:55 ` [PULL 21/21] hw/arm: Display CPU type in machine description Peter Maydell
2021-02-03  9:22 ` [PULL 00/21] target-arm queue Philippe Mathieu-Daudé
2021-02-03 10:12   ` P J P

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210202175517.28729-13-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).