qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/35] acpi: refactor error prone build_header() and packed structures usage in ACPI tables
@ 2021-09-24 12:27 Igor Mammedov
  2021-09-24 12:27 ` [PATCH v4 01/35] acpi: add helper routines to initialize " Igor Mammedov
                   ` (34 more replies)
  0 siblings, 35 replies; 41+ messages in thread
From: Igor Mammedov @ 2021-09-24 12:27 UTC (permalink / raw)
  To: qemu-devel; +Cc: ani, mst

v4:
  1. comments fixups and diing missing comments
  2. clean up spurious changes
  3. rebase on top of (4be8bfcb4d hw/i386/acpi-build: Fix a typo)
  4. convert build_iort:
        * keep nb_nodes variable
        * encode 'Memory access properties' as separate entries according to Table 13

v3:
  1. s/acpi_init_table()|acpi_table_composed()/acpi_table_begin()|acpi_table_end()/
  2. arm:madt fix incorrect length
  3. various comment improvments
  4. rewrite IORT conversion patch due to heavy conflicts with bypass iommu code
    merged recently
  5 pick up Eric's Reviewed-By where there wasn't significant change (1)

v2:
  - drop test related patches, they will be sent as a separate series
  - fix bios_loader pointer initialization ordering when using TPM1.2
  - extend commit message of [1/35] and add extra comment about
    table length patching 

Highlights:
  * drop pointer arithmetic in ACPI tables code
  * use endian agnostic API
  * simplifies review of tables. /in most cases just line by line comparision with spec/

Series replaces build_header() with acpi_table_begin()/acpi_table_end()
API that hides pointer/offset arithmetic from user, to prevent
errors caused by it [1].
While doing above, it was necessary to split table header from
packed structure that was describing the table, which is
counter-productive since it still leaves packed structure drawbacks.
So that sort of forced me to rewrite tables that were composed with
help of packed structures to preferred build_append_int_noprefix() API.
In cases where refactoring to build_append_int_noprefix() was small,
it was squashed with acpi_table_begin()/acpi_table_end() patch.
Conversion reduced code size quite a bit despite me adding doc comments
for every table row.

1) commits
   bb9feea43179 x86: acpi: use offset instead of pointer when using build_header()
   4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

Link to repo with this series and tests to validate it:
   https://gitlab.com/imammedo/qemu/-/commits/acpi_build_header_refactoring_v4

Previous v3 revision can be found at:
   https://lore.kernel.org/qemu-devel/20210907144814.741785-22-imammedo@redhat.com/T/


CC: mst@redhat.com
CC: ani@anisinha.ca


Igor Mammedov (35):
  acpi: add helper routines to initialize ACPI tables
  acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead
    of build_header()
  acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead
    of build_header()
  acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead
    of build_header()
  acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: use build_append_int_noprefix() API to compose SRAT table
  acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead
    of build_header()
  acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of
    build_header()
  acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead
    of build_header()
  acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead
    of build_header()
  acpi: x86: remove dead code
  acpi: x86: set enabled when composing _MAT entries
  acpi: x86: madt: use build_append_int_noprefix() API to compose MADT
    table
  acpi: arm/virt: madt: use build_append_int_noprefix() API to compose
    MADT table
  acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: arm/virt: convert build_iort() to endian agnostic
    build_append_FOO() API
  acpi: arm/virt: build_spcr: fix invalid cast
  acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end()
    instead of build_header()
  acpi: build_facs: use build_append_int_noprefix() API to compose table
  acpi: remove no longer used build_header()
  acpi: AcpiGenericAddress no longer used to map/access fields of MMIO,
    drop packed attribute

 include/hw/acpi/acpi-defs.h          | 528 +-----------------------
 include/hw/acpi/acpi_dev_interface.h |   3 +-
 include/hw/acpi/aml-build.h          |  37 +-
 include/hw/i386/pc.h                 |   6 +-
 hw/acpi/acpi-x86-stub.c              |   3 +-
 hw/acpi/aml-build.c                  | 203 ++++++----
 hw/acpi/cpu.c                        |  17 +-
 hw/acpi/ghes.c                       |  10 +-
 hw/acpi/hmat.c                       |  14 +-
 hw/acpi/nvdimm.c                     |  64 ++-
 hw/acpi/pci.c                        |  18 +-
 hw/acpi/vmgenid.c                    |  13 +-
 hw/arm/virt-acpi-build.c             | 577 +++++++++++++++------------
 hw/i386/acpi-build.c                 | 294 ++++++++------
 hw/i386/acpi-common.c                | 160 ++++----
 hw/i386/acpi-microvm.c               |  13 +-
 16 files changed, 801 insertions(+), 1159 deletions(-)

-- 
2.27.0



^ permalink raw reply	[flat|nested] 41+ messages in thread
* Re: [PATCH v3 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API
@ 2021-09-22 15:31 Eric Auger
  2021-09-23  7:47 ` [PATCH v4 " Igor Mammedov
  0 siblings, 1 reply; 41+ messages in thread
From: Eric Auger @ 2021-09-22 15:31 UTC (permalink / raw)
  To: Igor Mammedov
  Cc: peter.maydell, drjones, wangxingang5, mst, qemu-devel,
	shannon.zhaosl, qemu-arm


Hi Igor,
On 9/22/21 3:54 PM, Igor Mammedov wrote:
> On Wed, 22 Sep 2021 15:26:49 +0200
> Eric Auger <eric.auger@redhat.com> wrote:
>
> I'll fix patch up as suggested,
> though there is a question, see below
>
>> On 9/7/21 4:48 PM, Igor Mammedov wrote:
>>> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
>>> ---
>>> v3:
>>>   * practically rewritten, due to conflicts wiht bypass iommu feature
>>>
>>> CC: drjones@redhat.com
>>> CC: peter.maydell@linaro.org
>>> CC: shannon.zhaosl@gmail.com
>>> CC: qemu-arm@nongnu.org
>>> CC: wangxingang5@huawei.com
>>> CC: Eric Auger <eric.auger@redhat.com>
>>> ---
>>>  include/hw/acpi/acpi-defs.h |  71 ---------------
>>>  hw/arm/virt-acpi-build.c    | 167 ++++++++++++++++++++----------------
>>>  2 files changed, 91 insertions(+), 147 deletions(-)
>>>
>>> diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
>>> index 195f90caf6..6f2f08a9de 100644
>>> --- a/include/hw/acpi/acpi-defs.h
>>> +++ b/include/hw/acpi/acpi-defs.h
>>> @@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
>>>  } QEMU_PACKED;
>>>  typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
>>>  
>>> -/*
>>> - * IORT node types
>>> - */
>>> -
>>> -#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
>>> -    uint8_t  type;          \
>>> -    uint16_t length;        \
>>> -    uint8_t  revision;      \
>>> -    uint32_t reserved;      \
>>> -    uint32_t mapping_count; \
>>> -    uint32_t mapping_offset;
>>> -
>>> -/* Values for node Type above */
>>> -enum {
>>> -        ACPI_IORT_NODE_ITS_GROUP = 0x00,
>>> -        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
>>> -        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
>>> -        ACPI_IORT_NODE_SMMU = 0x03,
>>> -        ACPI_IORT_NODE_SMMU_V3 = 0x04
>>> -};
>>> -
>>> -struct AcpiIortIdMapping {
>>> -    uint32_t input_base;
>>> -    uint32_t id_count;
>>> -    uint32_t output_base;
>>> -    uint32_t output_reference;
>>> -    uint32_t flags;
>>> -} QEMU_PACKED;
>>> -typedef struct AcpiIortIdMapping AcpiIortIdMapping;
>>> -
>>> -struct AcpiIortMemoryAccess {
>>> -    uint32_t cache_coherency;
>>> -    uint8_t  hints;
>>> -    uint16_t reserved;
>>> -    uint8_t  memory_flags;
>>> -} QEMU_PACKED;
>>> -typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
>>> -
>>> -struct AcpiIortItsGroup {
>>> -    ACPI_IORT_NODE_HEADER_DEF
>>> -    uint32_t its_count;
>>> -    uint32_t identifiers[];
>>> -} QEMU_PACKED;
>>> -typedef struct AcpiIortItsGroup AcpiIortItsGroup;
>>> -
>>> -#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
>>> -
>>> -struct AcpiIortSmmu3 {
>>> -    ACPI_IORT_NODE_HEADER_DEF
>>> -    uint64_t base_address;
>>> -    uint32_t flags;
>>> -    uint32_t reserved2;
>>> -    uint64_t vatos_address;
>>> -    uint32_t model;
>>> -    uint32_t event_gsiv;
>>> -    uint32_t pri_gsiv;
>>> -    uint32_t gerr_gsiv;
>>> -    uint32_t sync_gsiv;
>>> -    AcpiIortIdMapping id_mapping_array[];
>>> -} QEMU_PACKED;
>>> -typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
>>> -
>>> -struct AcpiIortRC {
>>> -    ACPI_IORT_NODE_HEADER_DEF
>>> -    AcpiIortMemoryAccess memory_properties;
>>> -    uint32_t ats_attribute;
>>> -    uint32_t pci_segment_number;
>>> -    AcpiIortIdMapping id_mapping_array[];
>>> -} QEMU_PACKED;
>>> -typedef struct AcpiIortRC AcpiIortRC;
>>> -
>>>  #endif
>>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
>>> index bceb1b3b7e..4c682e7b09 100644
>>> --- a/hw/arm/virt-acpi-build.c
>>> +++ b/hw/arm/virt-acpi-build.c
>>> @@ -240,6 +240,28 @@ static void acpi_dsdt_add_tpm(Aml *scope, VirtMachineState *vms)
>>>  }
>>>  #endif
>>>  
>>> +#define ID_MAPPING_ENTRY_SIZE 20
>>> +#define SMMU_V3_ENTRY_SIZE 60
>>> +#define ROOT_COMPLEX_ENTRY_SIZE 32
>>> +#define IORT_NODE_OFFSET 48
>>> +
>>> +static void build_iort_id_mapping(GArray *table_data, uint32_t input_base,
>>> +                                  uint32_t id_count, uint32_t out_ref)
>>> +{
>>> +    /* Identity RID mapping covering the whole input RID range */
>>> +    build_append_int_noprefix(table_data, input_base, 4); /* Input base */
>>> +    build_append_int_noprefix(table_data, id_count, 4); /* Number of IDs */
>>> +    build_append_int_noprefix(table_data, input_base, 4); /* Output base */
>>> +    build_append_int_noprefix(table_data, out_ref, 4); /* Output Reference */
>>> +    build_append_int_noprefix(table_data, 0, 4); /* Flags */
>>> +}
>>> +
>>> +struct AcpiIortIdMapping {
>>> +    uint32_t input_base;
>>> +    uint32_t id_count;
>>> +};
>>> +typedef struct AcpiIortIdMapping AcpiIortIdMapping;
>>> +
>>>  /* Build the iort ID mapping to SMMUv3 for a given PCI host bridge */
>>>  static int
>>>  iort_host_bridges(Object *obj, void *opaque)
>>> @@ -281,18 +303,17 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
>>>  static void
>>>  build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>>>  {
>>> -    int i, nb_nodes, rc_mapping_count;
>>> -    AcpiIortIdMapping *idmap;
>>> -    AcpiIortItsGroup *its;
>>> -    AcpiIortSmmu3 *smmu;
>>> -    AcpiIortRC *rc;
>>> +    int i, rc_mapping_count;
>>>      const uint32_t iort_node_offset = 48;  
>> can be replaced by IORT_NODE_OFFSET now
>>>      size_t node_size, smmu_offset = 0;
>>> +    AcpiIortIdMapping *idmap;
>>>      GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
>>>      GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
>>>  
>>>      AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
>>>                          .oem_table_id = vms->oem_table_id };
>>> +    /* Table 2 The IORT */
>>> +    acpi_table_begin(&table, table_data);  
>> nit: you could have done this move in previous patch.
>>>  
>>>      if (vms->iommu == VIRT_IOMMU_SMMUV3) {
>>>  
>>> @@ -325,106 +346,100 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
>>>              g_array_append_val(its_idmaps, next_range);
>>>          }
>>>  
>>> -        nb_nodes = 3; /* RC, ITS, SMMUv3 */
>>>          rc_mapping_count = smmu_idmaps->len + its_idmaps->len;
>>> +        /* Number of IORT Nodes */
>>> +        build_append_int_noprefix(table_data, 3 /* RC, ITS, SMMUv3 */, 4);
>>>      } else {
>>> -        nb_nodes = 2; /* RC, ITS */
>>>          rc_mapping_count = 1;
>>> +        /* Number of IORT Nodes */
>>> +        build_append_int_noprefix(table_data, 2 /* RC, ITS */, 4);  
>> I think I would prefer to keep the nb_nodes variable and do the
>> corresponding build_append_int_noprefix only once. There may be
>> additional nodes added with increased complexity and potential extra
>> duplication.
>>>      }
>>>  
>>> -    /* Table 2 The IORT */
>>> -    acpi_table_begin(&table, table_data);
>>> -    /* Number of IORT Nodes */
>>> -    build_append_int_noprefix(table_data, nb_nodes, 4);
>>>      /* Offset to Array of IORT Nodes */
>>> -    build_append_int_noprefix(table_data, iort_node_offset, 4);
>>> +    build_append_int_noprefix(table_data, IORT_NODE_OFFSET, 4);
>>>      build_append_int_noprefix(table_data, 0, 4); /* Reserved */
>>>  
>>> -    /* ITS group node */
>>> -    node_size =  sizeof(*its) + sizeof(uint32_t);
>>> -    its = acpi_data_push(table_data, node_size);
>>> -
>>> -    its->type = ACPI_IORT_NODE_ITS_GROUP;
>>> -    its->length = cpu_to_le16(node_size);
>>> -    its->its_count = cpu_to_le32(1);
>>> -    its->identifiers[0] = 0; /* MADT translation_id */
>>> +    /* 3.1.1.3 ITS group node */
>>> +    build_append_int_noprefix(table_data, 0 /* ITS Group */, 1); /* Type */
>>> +    node_size =  20 /* fixed header size */ + 4 /* 1 GIC ITS Identifier */;
>>> +    build_append_int_noprefix(table_data, node_size, 2); /* Length */
>>> +    build_append_int_noprefix(table_data, 0, 1); /* Revision */
>>> +    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
>>> +    build_append_int_noprefix(table_data, 0, 4); /* Number of ID mappings */
>>> +    build_append_int_noprefix(table_data, 0, 4); /* Reference to ID Array */
>>> +    build_append_int_noprefix(table_data, 1, 4); /* Number of ITSs */
>>> +    /* GIC ITS Identifier Array */
>>> +    build_append_int_noprefix(table_data, 0 /* MADT translation_id */, 4);
>>>  
>>>      if (vms->iommu == VIRT_IOMMU_SMMUV3) {
>>>          int irq =  vms->irqmap[VIRT_SMMU] + ARM_SPI_BASE;
>>>  
>>> -        /* SMMUv3 node */
>>> -        smmu_offset = iort_node_offset + node_size;
>>> -        node_size = sizeof(*smmu) + sizeof(*idmap);
>>> -        smmu = acpi_data_push(table_data, node_size);
>>> -
>>> -        smmu->type = ACPI_IORT_NODE_SMMU_V3;
>>> -        smmu->length = cpu_to_le16(node_size);
>>> -        smmu->mapping_count = cpu_to_le32(1);
>>> -        smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
>>> -        smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
>>> -        smmu->flags = cpu_to_le32(ACPI_IORT_SMMU_V3_COHACC_OVERRIDE);
>>> -        smmu->event_gsiv = cpu_to_le32(irq);
>>> -        smmu->pri_gsiv = cpu_to_le32(irq + 1);
>>> -        smmu->sync_gsiv = cpu_to_le32(irq + 2);
>>> -        smmu->gerr_gsiv = cpu_to_le32(irq + 3);
>>> -
>>> -        /* Identity RID mapping covering the whole input RID range */
>>> -        idmap = &smmu->id_mapping_array[0];
>>> -        idmap->input_base = 0;
>>> -        idmap->id_count = cpu_to_le32(0xFFFF);
>>> -        idmap->output_base = 0;
>>> -        /* output IORT node is the ITS group node (the first node) */
>>> -        idmap->output_reference = cpu_to_le32(iort_node_offset);
>>> +        smmu_offset = table_data->len - table.table_offset;
>>> +        /* 3.1.1.2 SMMUv3 */
>>> +        build_append_int_noprefix(table_data, 4 /* SMMUv3 */, 1); /* Type */
>>> +        node_size =  SMMU_V3_ENTRY_SIZE + ID_MAPPING_ENTRY_SIZE;
>>> +        build_append_int_noprefix(table_data, node_size, 2); /* Length */
>>> +        build_append_int_noprefix(table_data, 0, 1); /* Revision */
>>> +        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
>>> +        build_append_int_noprefix(table_data, 1, 4); /* Number of ID mappings */
>>> +        /* Reference to ID Array */
>>> +        build_append_int_noprefix(table_data, SMMU_V3_ENTRY_SIZE, 4);
>>> +        /* Base address */
>>> +        build_append_int_noprefix(table_data, vms->memmap[VIRT_SMMU].base, 8);
>>> +        /* Flags */
>>> +        build_append_int_noprefix(table_data, 1 /* COHACC OverrideNote */, 4);
>>> +        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
>>> +        build_append_int_noprefix(table_data, 0, 8); /* VATOS address */
>>> +        /* Model */
>>> +        build_append_int_noprefix(table_data, 0 /* Generic SMMU-v3 */, 4);
>>> +        build_append_int_noprefix(table_data, irq, 4); /* Event */
>>> +        build_append_int_noprefix(table_data, irq + 1, 4); /* PRI */
>>> +        build_append_int_noprefix(table_data, irq + 3, 4); /* GERR */
>>> +        build_append_int_noprefix(table_data, irq + 2, 4); /* Sync */  
>> Please keep that comment. I think it helps
>>        /* output IORT node is the ITS group node (the first node) */
>>> +
>>> +        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
>>>      }
>>>  
>>> -    /* Root Complex Node */
>>> -    node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
>>> -    rc = acpi_data_push(table_data, node_size);
>>> -
>>> -    rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
>>> -    rc->length = cpu_to_le16(node_size);
>>> -    rc->mapping_count = cpu_to_le32(rc_mapping_count);
>>> -    rc->mapping_offset = cpu_to_le32(sizeof(*rc));
>>> -
>>> +    /* Table 16 Root Complex Node */
>>> +    build_append_int_noprefix(table_data, 2 /* Root complex */, 1); /* Type */
>>> +    node_size =  ROOT_COMPLEX_ENTRY_SIZE +
>>> +                 ID_MAPPING_ENTRY_SIZE * rc_mapping_count;
>>> +    build_append_int_noprefix(table_data, node_size, 2); /* Length */
>>> +    build_append_int_noprefix(table_data, 0, 1); /* Revision */
>>> +    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
>>> +    /* Number of ID mappings */
>>> +    build_append_int_noprefix(table_data, rc_mapping_count, 4);
>>> +    /* Reference to ID Array */
>>> +    build_append_int_noprefix(table_data, ROOT_COMPLEX_ENTRY_SIZE, 4);
>>>      /* fully coherent device */  
>> this comment should become /* Memory access properties */ for homogenity
>>> -    rc->memory_properties.cache_coherency = cpu_to_le32(1);
>>> -    rc->memory_properties.memory_flags = 0x3; /* CCA = CPM = DCAS = 1 */
>>> -    rc->pci_segment_number = 0; /* MCFG pci_segment */
>>> -
>>> +    build_append_int_noprefix(table_data,
>>> +        1 | /* CCA: Cache Coherent Attribute, The device is fully coherent */
>>> +        (3ULL << 7 * 8) /* MAF: Memory Access Flags, CCA = CPM = DCAS = 1 */,
>>> +        8);  
>> I think we would gain in readability if we were to split into multiple
>>
>> build_append_int_noprefix according to Table 13 fields
> in spec I've got it's "Table 14: Memory access properties"
> Do you have any preference which spec/rev/ we should use for IORT?

I looked at Document number: ARM DEN 0049B
as said in the comment Document number: ARM DEN 0049B, October 2015
Found
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjD3q_E0JLzAhVtgP0HHRuxDtYQFnoECAIQAQ&url=https%3A%2F%2Fdocumentation-service.arm.com%2Fstatic%2F5f8eb168f86e16515cdbe414%3Ftoken%3D&usg=AOvVaw1tQQk9lJwojw_hM6ZJUbat

Table 13 Memory access properties Thanks Eric

>
>>> +    build_append_int_noprefix(table_data, 0, 4); /* ATS Attribute */
>>> +    /* MCFG pci_segment */
>>> +    build_append_int_noprefix(table_data, 0, 4); /* PCI Segment number */
>>> +
>>> +    /* Output Reference */
>>>      if (vms->iommu == VIRT_IOMMU_SMMUV3) {
>>>          AcpiIortIdMapping *range;
>>>  
>>>          /* translated RIDs connect to SMMUv3 node: RC -> SMMUv3 -> ITS */
>>>          for (i = 0; i < smmu_idmaps->len; i++) {
>>> -            idmap = &rc->id_mapping_array[i];
>>>              range = &g_array_index(smmu_idmaps, AcpiIortIdMapping, i);
>>> -
>>> -            idmap->input_base = cpu_to_le32(range->input_base);
>>> -            idmap->id_count = cpu_to_le32(range->id_count);
>>> -            idmap->output_base = cpu_to_le32(range->input_base);
>>> -            /* output IORT node is the smmuv3 node */
>>> -            idmap->output_reference = cpu_to_le32(smmu_offset);  
>> please keep the original comment
>>> +            build_iort_id_mapping(table_data, range->input_base,
>>> +                                  range->id_count, smmu_offset);
>>>          }
>>>  
>>>          /* bypassed RIDs connect to ITS group node directly: RC -> ITS */
>>>          for (i = 0; i < its_idmaps->len; i++) {
>>> -            idmap = &rc->id_mapping_array[smmu_idmaps->len + i];
>>>              range = &g_array_index(its_idmaps, AcpiIortIdMapping, i);
>>> -
>>> -            idmap->input_base = cpu_to_le32(range->input_base);
>>> -            idmap->id_count = cpu_to_le32(range->id_count);
>>> -            idmap->output_base = cpu_to_le32(range->input_base);
>>> -            /* output IORT node is the ITS group node (the first node) */
>>> -            idmap->output_reference = cpu_to_le32(iort_node_offset);  
>> same, at least it helps me ;-)
>>> +            build_iort_id_mapping(table_data, range->input_base,
>>> +                                  range->id_count, iort_node_offset);
>>>          }
>>>      } else {
>>> -        /* Identity RID mapping covering the whole input RID range */
>>> -        idmap = &rc->id_mapping_array[0];
>>> -        idmap->input_base = cpu_to_le32(0);
>>> -        idmap->id_count = cpu_to_le32(0xFFFF);
>>> -        idmap->output_base = cpu_to_le32(0);
>>>          /* output IORT node is the ITS group node (the first node) */
>>> -        idmap->output_reference = cpu_to_le32(iort_node_offset);
>>> +        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
>>>      }
>>>  
>>>      acpi_table_end(linker, &table);  
>> Thanks
>>
>> Eric
>>



^ permalink raw reply	[flat|nested] 41+ messages in thread

end of thread, other threads:[~2021-09-27 10:11 UTC | newest]

Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-24 12:27 [PATCH v4 00/35] acpi: refactor error prone build_header() and packed structures usage in ACPI tables Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 01/35] acpi: add helper routines to initialize " Igor Mammedov
2021-09-24 20:52   ` Stefan Berger
2021-09-26  9:16   ` wangyanan (Y)
2021-09-24 12:27 ` [PATCH v4 02/35] acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header() Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 03/35] acpi: build_xsdt: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 04/35] acpi: build_slit: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 05/35] acpi: build_fadt: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 06/35] acpi: build_tpm2: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 07/35] acpi: acpi_build_hest: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 08/35] acpi: build_mcfg: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 09/35] acpi: build_hmat: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 10/35] acpi: nvdimm_build_nfit: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 11/35] acpi: nvdimm_build_ssdt: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 12/35] acpi: vmgenid_build_acpi: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 13/35] acpi: x86: build_dsdt: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 14/35] acpi: build_hpet: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 15/35] acpi: build_tpm_tcpa: " Igor Mammedov
2021-09-24 20:46   ` Stefan Berger
2021-09-24 12:27 ` [PATCH v4 16/35] acpi: arm/x86: build_srat: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 17/35] acpi: use build_append_int_noprefix() API to compose SRAT table Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 18/35] acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead of build_header() Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 19/35] acpi: build_waet: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 20/35] acpi: build_amd_iommu: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 21/35] acpi: madt: arm/x86: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 22/35] acpi: x86: remove dead code Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 23/35] acpi: x86: set enabled when composing _MAT entries Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 24/35] acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 25/35] acpi: arm/virt: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 26/35] acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header() Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 27/35] acpi: arm: virt: build_dsdt: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 28/35] acpi: arm: virt: build_iort: " Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API Igor Mammedov
2021-09-27  9:56   ` Eric Auger
2021-09-24 12:27 ` [PATCH v4 30/35] acpi: arm/virt: build_spcr: fix invalid cast Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 31/35] acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header() Igor Mammedov
2021-09-24 12:27 ` [PATCH v4 32/35] acpi: arm/virt: build_gtdt: " Igor Mammedov
2021-09-24 12:28 ` [PATCH v4 33/35] acpi: build_facs: use build_append_int_noprefix() API to compose table Igor Mammedov
2021-09-24 12:28 ` [PATCH v4 34/35] acpi: remove no longer used build_header() Igor Mammedov
2021-09-24 12:28 ` [PATCH v4 35/35] acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute Igor Mammedov
  -- strict thread matches above, loose matches on Subject: below --
2021-09-22 15:31 [PATCH v3 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API Eric Auger
2021-09-23  7:47 ` [PATCH v4 " Igor Mammedov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).