qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Matthew Rosato <mjrosato@linux.ibm.com>
To: qemu-s390x@nongnu.org
Cc: farman@linux.ibm.com, kvm@vger.kernel.org, pmorel@linux.ibm.com,
	schnelle@linux.ibm.com, cohuck@redhat.com,
	richard.henderson@linaro.org, thuth@redhat.com,
	qemu-devel@nongnu.org, pasic@linux.ibm.com,
	alex.williamson@redhat.com, mst@redhat.com, pbonzini@redhat.com,
	david@redhat.com, borntraeger@linux.ibm.com
Subject: [PATCH v5 7/9] s390x/pci: enable adapter event notification for interpreted devices
Date: Mon,  4 Apr 2022 14:17:24 -0400	[thread overview]
Message-ID: <20220404181726.60291-8-mjrosato@linux.ibm.com> (raw)
In-Reply-To: <20220404181726.60291-1-mjrosato@linux.ibm.com>

Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested.  This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
 hw/s390x/s390-pci-bus.c         | 20 ++++++++++++++---
 hw/s390x/s390-pci-inst.c        | 40 +++++++++++++++++++++++++++++++--
 hw/s390x/s390-pci-kvm.c         | 30 +++++++++++++++++++++++++
 include/hw/s390x/s390-pci-bus.h |  1 +
 include/hw/s390x/s390-pci-kvm.h | 14 ++++++++++++
 5 files changed, 100 insertions(+), 5 deletions(-)

diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 9c02d31250..47918d2ce9 100644
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -190,7 +190,10 @@ void s390_pci_sclp_deconfigure(SCCB *sccb)
         rc = SCLP_RC_NO_ACTION_REQUIRED;
         break;
     default:
-        if (pbdev->summary_ind) {
+        if (pbdev->interp && (pbdev->fh & FH_MASK_ENABLE)) {
+            /* Interpreted devices were using interrupt forwarding */
+            s390_pci_kvm_aif_disable(pbdev);
+        } else if (pbdev->summary_ind) {
             pci_dereg_irqs(pbdev);
         }
         if (pbdev->iommu->enabled) {
@@ -1078,6 +1081,7 @@ static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                 } else {
                     DPRINTF("zPCI interpretation facilities missing.\n");
                     pbdev->interp = false;
+                    pbdev->forwarding_assist = false;
                 }
             }
             pbdev->iommu->dma_limit = s390_pci_start_dma_count(s, pbdev);
@@ -1086,11 +1090,13 @@ static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
             if (!pbdev->interp) {
                 /* Do vfio passthrough but intercept for I/O */
                 pbdev->fh |= FH_SHM_VFIO;
+                pbdev->forwarding_assist = false;
             }
         } else {
             pbdev->fh |= FH_SHM_EMUL;
             /* Always intercept emulated devices */
             pbdev->interp = false;
+            pbdev->forwarding_assist = false;
         }
 
         if (s390_pci_msix_init(pbdev) && !pbdev->interp) {
@@ -1240,7 +1246,10 @@ static void s390_pcihost_reset(DeviceState *dev)
     /* Process all pending unplug requests */
     QTAILQ_FOREACH_SAFE(pbdev, &s->zpci_devs, link, next) {
         if (pbdev->unplug_requested) {
-            if (pbdev->summary_ind) {
+            if (pbdev->interp && (pbdev->fh & FH_MASK_ENABLE)) {
+                /* Interpreted devices were using interrupt forwarding */
+                s390_pci_kvm_aif_disable(pbdev);
+            } else if (pbdev->summary_ind) {
                 pci_dereg_irqs(pbdev);
             }
             if (pbdev->iommu->enabled) {
@@ -1378,7 +1387,10 @@ static void s390_pci_device_reset(DeviceState *dev)
         break;
     }
 
-    if (pbdev->summary_ind) {
+    if (pbdev->interp && (pbdev->fh & FH_MASK_ENABLE)) {
+        /* Interpreted devices were using interrupt forwarding */
+        s390_pci_kvm_aif_disable(pbdev);
+    } else if (pbdev->summary_ind) {
         pci_dereg_irqs(pbdev);
     }
     if (pbdev->iommu->enabled) {
@@ -1424,6 +1436,8 @@ static Property s390_pci_device_properties[] = {
     DEFINE_PROP_S390_PCI_FID("fid", S390PCIBusDevice, fid),
     DEFINE_PROP_STRING("target", S390PCIBusDevice, target),
     DEFINE_PROP_BOOL("interpret", S390PCIBusDevice, interp, true),
+    DEFINE_PROP_BOOL("forwarding_assist", S390PCIBusDevice, forwarding_assist,
+                     true),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index c898c8abe9..c3a34da73d 100644
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -1062,6 +1062,32 @@ static void fmb_update(void *opaque)
     timer_mod(pbdev->fmb_timer, t + pbdev->pci_group->zpci_group.mui);
 }
 
+static int mpcifc_reg_int_interp(S390PCIBusDevice *pbdev, ZpciFib *fib)
+{
+    int rc;
+
+    rc = s390_pci_kvm_aif_enable(pbdev, fib, pbdev->forwarding_assist);
+    if (rc) {
+        DPRINTF("Failed to enable interrupt forwarding\n");
+        return rc;
+    }
+
+    return 0;
+}
+
+static int mpcifc_dereg_int_interp(S390PCIBusDevice *pbdev, ZpciFib *fib)
+{
+    int rc;
+
+    rc = s390_pci_kvm_aif_disable(pbdev);
+    if (rc) {
+        DPRINTF("Failed to disable interrupt forwarding\n");
+        return rc;
+    }
+
+    return 0;
+}
+
 int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
                         uintptr_t ra)
 {
@@ -1116,7 +1142,12 @@ int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
 
     switch (oc) {
     case ZPCI_MOD_FC_REG_INT:
-        if (pbdev->summary_ind) {
+        if (pbdev->interp) {
+            if (mpcifc_reg_int_interp(pbdev, &fib)) {
+                cc = ZPCI_PCI_LS_ERR;
+                s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
+            }
+        } else if (pbdev->summary_ind) {
             cc = ZPCI_PCI_LS_ERR;
             s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
         } else if (reg_irqs(env, pbdev, fib)) {
@@ -1125,7 +1156,12 @@ int mpcifc_service_call(S390CPU *cpu, uint8_t r1, uint64_t fiba, uint8_t ar,
         }
         break;
     case ZPCI_MOD_FC_DEREG_INT:
-        if (!pbdev->summary_ind) {
+        if (pbdev->interp) {
+            if (mpcifc_dereg_int_interp(pbdev, &fib)) {
+                cc = ZPCI_PCI_LS_ERR;
+                s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
+            }
+        } else if (!pbdev->summary_ind) {
             cc = ZPCI_PCI_LS_ERR;
             s390_set_status_code(env, r1, ZPCI_MOD_ST_SEQUENCE);
         } else {
diff --git a/hw/s390x/s390-pci-kvm.c b/hw/s390x/s390-pci-kvm.c
index 8bfce9ef18..cb20b8dcb9 100644
--- a/hw/s390x/s390-pci-kvm.c
+++ b/hw/s390x/s390-pci-kvm.c
@@ -11,11 +11,41 @@
 
 #include "qemu/osdep.h"
 
+#include <linux/kvm.h>
+
 #include "kvm/kvm_s390x.h"
+#include "hw/s390x/s390-pci-bus.h"
 #include "hw/s390x/s390-pci-kvm.h"
+#include "hw/s390x/s390-pci-inst.h"
 #include "cpu_models.h"
 
 bool s390_pci_kvm_interp_allowed(void)
 {
     return s390_has_feat(S390_FEAT_ZPCI_INTERP) && kvm_s390_get_zpci_op();
 }
+
+int s390_pci_kvm_aif_enable(S390PCIBusDevice *pbdev, ZpciFib *fib, bool assist)
+{
+    struct kvm_s390_zpci_op args = {
+        .fh = pbdev->fh,
+        .op = KVM_S390_ZPCIOP_REG_AEN,
+        .u.reg_aen.ibv = fib->aibv,
+        .u.reg_aen.sb = fib->aisb,
+        .u.reg_aen.noi = FIB_DATA_NOI(fib->data),
+        .u.reg_aen.isc = FIB_DATA_ISC(fib->data),
+        .u.reg_aen.sbo = FIB_DATA_AISBO(fib->data),
+        .u.reg_aen.flags = (assist) ? 0 : KVM_S390_ZPCIOP_REGAEN_HOST
+    };
+
+    return kvm_vm_ioctl(kvm_state, KVM_S390_ZPCI_OP, &args);
+}
+
+int s390_pci_kvm_aif_disable(S390PCIBusDevice *pbdev)
+{
+    struct kvm_s390_zpci_op args = {
+        .fh = pbdev->fh,
+        .op = KVM_S390_ZPCIOP_DEREG_AEN
+    };
+
+    return kvm_vm_ioctl(kvm_state, KVM_S390_ZPCI_OP, &args);
+}
diff --git a/include/hw/s390x/s390-pci-bus.h b/include/hw/s390x/s390-pci-bus.h
index a9843dfe97..5b09f0cf2f 100644
--- a/include/hw/s390x/s390-pci-bus.h
+++ b/include/hw/s390x/s390-pci-bus.h
@@ -351,6 +351,7 @@ struct S390PCIBusDevice {
     bool pci_unplug_request_processed;
     bool unplug_requested;
     bool interp;
+    bool forwarding_assist;
     QTAILQ_ENTRY(S390PCIBusDevice) link;
 };
 
diff --git a/include/hw/s390x/s390-pci-kvm.h b/include/hw/s390x/s390-pci-kvm.h
index 80a2e7d0ca..933814a402 100644
--- a/include/hw/s390x/s390-pci-kvm.h
+++ b/include/hw/s390x/s390-pci-kvm.h
@@ -12,13 +12,27 @@
 #ifndef HW_S390_PCI_KVM_H
 #define HW_S390_PCI_KVM_H
 
+#include "hw/s390x/s390-pci-bus.h"
+#include "hw/s390x/s390-pci-inst.h"
+
 #ifdef CONFIG_KVM
 bool s390_pci_kvm_interp_allowed(void);
+int s390_pci_kvm_aif_enable(S390PCIBusDevice *pbdev, ZpciFib *fib, bool assist);
+int s390_pci_kvm_aif_disable(S390PCIBusDevice *pbdev);
 #else
 static inline bool s390_pci_kvm_interp_allowed(void)
 {
     return false;
 }
+static inline int s390_pci_kvm_aif_enable(S390PCIBusDevice *pbdev, ZpciFib *fib,
+                                          bool assist)
+{
+    return -EINVAL;
+}
+static inline int s390_pci_kvm_aif_disable(S390PCIBusDevice *pbdev)
+{
+    return -EINVAL;
+}
 #endif
 
 #endif
-- 
2.27.0



  parent reply	other threads:[~2022-04-04 18:28 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-04 18:17 [PATCH v5 0/9] s390x/pci: zPCI interpretation support Matthew Rosato
2022-04-04 18:17 ` [PATCH v5 1/9] Update linux headers Matthew Rosato
2022-04-04 18:17 ` [PATCH v5 2/9] vfio: tolerate migration protocol v1 uapi renames Matthew Rosato
2022-04-12 15:50   ` Pierre Morel
2022-04-12 16:07     ` Matthew Rosato
2022-04-19 15:44       ` Pierre Morel
2022-04-04 18:17 ` [PATCH v5 3/9] target/s390x: add zpci-interp to cpu models Matthew Rosato
2022-05-18  8:01   ` Thomas Huth
2022-05-18  8:02     ` Thomas Huth
2022-05-18  8:05   ` Thomas Huth
2022-04-04 18:17 ` [PATCH v5 4/9] s390x/pci: add routine to get host function handle from CLP info Matthew Rosato
2022-04-19 19:15   ` Pierre Morel
2022-05-18  8:13   ` Thomas Huth
2022-04-04 18:17 ` [PATCH v5 5/9] s390x/pci: enable for load/store intepretation Matthew Rosato
2022-04-19 19:47   ` Pierre Morel
2022-04-20 15:12     ` Matthew Rosato
2022-04-22  9:27       ` Pierre Morel
2022-04-04 18:17 ` [PATCH v5 6/9] s390x/pci: don't fence interpreted devices without MSI-X Matthew Rosato
2022-04-04 18:17 ` Matthew Rosato [this message]
2022-04-22  9:39   ` [PATCH v5 7/9] s390x/pci: enable adapter event notification for interpreted devices Pierre Morel
2022-04-22 12:10     ` Matthew Rosato
2022-05-02  7:48       ` Pierre Morel
2022-05-02  9:19         ` Niklas Schnelle
2022-05-02 11:30           ` Pierre Morel
2022-05-02 19:57             ` Matthew Rosato
2022-05-03 14:53               ` Pierre Morel
2022-05-04 14:20                 ` Matthew Rosato
2022-04-04 18:17 ` [PATCH v5 8/9] s390x/pci: let intercept devices have separate PCI groups Matthew Rosato
2022-04-04 18:17 ` [PATCH v5 9/9] s390x/pci: reflect proper maxstbl for groups of interpreted devices Matthew Rosato
2022-04-19 19:49   ` Pierre Morel
2022-04-22  9:43   ` Pierre Morel
2022-05-06  9:03   ` Pierre Morel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220404181726.60291-8-mjrosato@linux.ibm.com \
    --to=mjrosato@linux.ibm.com \
    --cc=alex.williamson@redhat.com \
    --cc=borntraeger@linux.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=farman@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=pasic@linux.ibm.com \
    --cc=pbonzini@redhat.com \
    --cc=pmorel@linux.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=schnelle@linux.ibm.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).