[PATCH 2/9] drm/i915: Fix PLL 8x/3 divider for MIPI video mode

[Vidya Srinivas <vidya.srinivas@intel.com>]

From: Uma Shankar <uma.shankar@intel.com>

MIPI Video Mode for high res panels (requiring dual link), need a
8X/3 divider to be programmed as 0x2. Modifying the same
in this patch.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi_pll.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
index 61440e5..3a73086 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -416,11 +416,7 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
 	rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2;
 	rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2;
 
-	/* As per bpsec program the 8/3X clock divider to the below value */
-	if (dev_priv->vbt.dsi.config->is_cmd_mode)
-		mipi_8by3_divider = 0x2;
-	else
-		mipi_8by3_divider = 0x3;
+	mipi_8by3_divider = 0x2;
 
 	tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider);
 	tmp |= BXT_MIPI_TX_ESCLK_DIVIDER(port, tx_div);
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx