All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	<benjamin.gaignard@linaro.org>,
	Gerald Baeza <gerald.baeza@st.com>,
	Loic Pallardy <loic.pallardy@st.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-mmc@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH V2 13/27] mmc: mmci: add dma_error callback
Date: Fri, 21 Sep 2018 11:46:07 +0200	[thread overview]
Message-ID: <1537523181-14578-14-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1537523181-14578-1-git-send-email-ludovic.Barre@st.com>

From: Ludovic Barre <ludovic.barre@st.com>

This patch adds dma_error callback at mmci_host_ops
to allow to call specific variant.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c          | 20 +++++++++++---------
 drivers/mmc/host/mmci.h          |  2 ++
 drivers/mmc/host/mmci_qcom_dml.c |  1 +
 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1158d5c..5a8b09c 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -453,6 +453,12 @@ void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
 		host->ops->dma_finalize(host, data);
 }
 
+void mmci_dma_error(struct mmci_host *host)
+{
+	if (host->ops && host->ops->dma_error)
+		host->ops->dma_error(host);
+}
+
 static void
 mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 {
@@ -615,7 +621,7 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
 		     mmc_get_dma_dir(data));
 }
 
-static void mmci_dma_data_error(struct mmci_host *host)
+void mmci_dmae_error(struct mmci_host *host)
 {
 	struct mmci_dmae_priv *dmae = host->dma_priv;
 
@@ -656,7 +662,7 @@ void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data)
 	 * contiguous buffers.  On TX, we'll get a FIFO underrun error.
 	 */
 	if (status & MCI_RXDATAAVLBLMASK) {
-		mmci_dma_data_error(host);
+		mmci_dma_error(host);
 		if (!data->error)
 			data->error = -EIO;
 	} else if (!data->host_cookie) {
@@ -827,13 +833,9 @@ static struct mmci_host_ops mmci_variant_ops = {
 	.dma_release = mmci_dmae_release,
 	.dma_start = mmci_dmae_start,
 	.dma_finalize = mmci_dmae_finalize,
+	.dma_error = mmci_dmae_error,
 };
 #else
-/* Blank functions if the DMA engine is not available */
-static inline void mmci_dma_data_error(struct mmci_host *host)
-{
-}
-
 static struct mmci_host_ops mmci_variant_ops = {};
 #endif
 
@@ -1011,7 +1013,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		u32 remain, success;
 
 		/* Terminate the DMA transfer */
-		mmci_dma_data_error(host);
+		mmci_dma_error(host);
 
 		/*
 		 * Calculate how far we are into the transfer.  Note that
@@ -1157,7 +1159,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	if ((!sbc && !cmd->data) || cmd->error) {
 		if (host->data) {
 			/* Terminate the DMA transfer */
-			mmci_dma_data_error(host);
+			mmci_dma_error(host);
 
 			mmci_stop_data(host);
 		}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index b793cfb..320f122 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -282,6 +282,7 @@ struct mmci_host_ops {
 	void (*dma_release)(struct mmci_host *host);
 	int (*dma_start)(struct mmci_host *host, unsigned int *datactrl);
 	void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data);
+	void (*dma_error)(struct mmci_host *host);
 };
 
 struct mmci_host {
@@ -341,3 +342,4 @@ int mmci_dmae_setup(struct mmci_host *host);
 void mmci_dmae_release(struct mmci_host *host);
 int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl);
 void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data);
+void mmci_dmae_error(struct mmci_host *host);
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
index f1fd48a..a352115 100644
--- a/drivers/mmc/host/mmci_qcom_dml.c
+++ b/drivers/mmc/host/mmci_qcom_dml.c
@@ -189,6 +189,7 @@ static struct mmci_host_ops qcom_variant_ops = {
 	.dma_release = mmci_dmae_release,
 	.dma_start = mmci_dmae_start,
 	.dma_finalize = mmci_dmae_finalize,
+	.dma_error = mmci_dmae_error,
 };
 
 void qcom_variant_init(struct mmci_host *host)
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	benjamin.gaignard@linaro.org, Gerald Baeza <gerald.baeza@st.com>,
	Loic Pallardy <loic.pallardy@st.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mmc@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH V2 13/27] mmc: mmci: add dma_error callback
Date: Fri, 21 Sep 2018 11:46:07 +0200	[thread overview]
Message-ID: <1537523181-14578-14-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1537523181-14578-1-git-send-email-ludovic.Barre@st.com>

From: Ludovic Barre <ludovic.barre@st.com>

This patch adds dma_error callback at mmci_host_ops
to allow to call specific variant.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c          | 20 +++++++++++---------
 drivers/mmc/host/mmci.h          |  2 ++
 drivers/mmc/host/mmci_qcom_dml.c |  1 +
 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1158d5c..5a8b09c 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -453,6 +453,12 @@ void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
 		host->ops->dma_finalize(host, data);
 }
 
+void mmci_dma_error(struct mmci_host *host)
+{
+	if (host->ops && host->ops->dma_error)
+		host->ops->dma_error(host);
+}
+
 static void
 mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 {
@@ -615,7 +621,7 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
 		     mmc_get_dma_dir(data));
 }
 
-static void mmci_dma_data_error(struct mmci_host *host)
+void mmci_dmae_error(struct mmci_host *host)
 {
 	struct mmci_dmae_priv *dmae = host->dma_priv;
 
@@ -656,7 +662,7 @@ void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data)
 	 * contiguous buffers.  On TX, we'll get a FIFO underrun error.
 	 */
 	if (status & MCI_RXDATAAVLBLMASK) {
-		mmci_dma_data_error(host);
+		mmci_dma_error(host);
 		if (!data->error)
 			data->error = -EIO;
 	} else if (!data->host_cookie) {
@@ -827,13 +833,9 @@ static struct mmci_host_ops mmci_variant_ops = {
 	.dma_release = mmci_dmae_release,
 	.dma_start = mmci_dmae_start,
 	.dma_finalize = mmci_dmae_finalize,
+	.dma_error = mmci_dmae_error,
 };
 #else
-/* Blank functions if the DMA engine is not available */
-static inline void mmci_dma_data_error(struct mmci_host *host)
-{
-}
-
 static struct mmci_host_ops mmci_variant_ops = {};
 #endif
 
@@ -1011,7 +1013,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		u32 remain, success;
 
 		/* Terminate the DMA transfer */
-		mmci_dma_data_error(host);
+		mmci_dma_error(host);
 
 		/*
 		 * Calculate how far we are into the transfer.  Note that
@@ -1157,7 +1159,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	if ((!sbc && !cmd->data) || cmd->error) {
 		if (host->data) {
 			/* Terminate the DMA transfer */
-			mmci_dma_data_error(host);
+			mmci_dma_error(host);
 
 			mmci_stop_data(host);
 		}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index b793cfb..320f122 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -282,6 +282,7 @@ struct mmci_host_ops {
 	void (*dma_release)(struct mmci_host *host);
 	int (*dma_start)(struct mmci_host *host, unsigned int *datactrl);
 	void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data);
+	void (*dma_error)(struct mmci_host *host);
 };
 
 struct mmci_host {
@@ -341,3 +342,4 @@ int mmci_dmae_setup(struct mmci_host *host);
 void mmci_dmae_release(struct mmci_host *host);
 int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl);
 void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data);
+void mmci_dmae_error(struct mmci_host *host);
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
index f1fd48a..a352115 100644
--- a/drivers/mmc/host/mmci_qcom_dml.c
+++ b/drivers/mmc/host/mmci_qcom_dml.c
@@ -189,6 +189,7 @@ static struct mmci_host_ops qcom_variant_ops = {
 	.dma_release = mmci_dmae_release,
 	.dma_start = mmci_dmae_start,
 	.dma_finalize = mmci_dmae_finalize,
+	.dma_error = mmci_dmae_error,
 };
 
 void qcom_variant_init(struct mmci_host *host)
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: ludovic.Barre@st.com (Ludovic Barre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 13/27] mmc: mmci: add dma_error callback
Date: Fri, 21 Sep 2018 11:46:07 +0200	[thread overview]
Message-ID: <1537523181-14578-14-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1537523181-14578-1-git-send-email-ludovic.Barre@st.com>

From: Ludovic Barre <ludovic.barre@st.com>

This patch adds dma_error callback at mmci_host_ops
to allow to call specific variant.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c          | 20 +++++++++++---------
 drivers/mmc/host/mmci.h          |  2 ++
 drivers/mmc/host/mmci_qcom_dml.c |  1 +
 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1158d5c..5a8b09c 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -453,6 +453,12 @@ void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
 		host->ops->dma_finalize(host, data);
 }
 
+void mmci_dma_error(struct mmci_host *host)
+{
+	if (host->ops && host->ops->dma_error)
+		host->ops->dma_error(host);
+}
+
 static void
 mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 {
@@ -615,7 +621,7 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
 		     mmc_get_dma_dir(data));
 }
 
-static void mmci_dma_data_error(struct mmci_host *host)
+void mmci_dmae_error(struct mmci_host *host)
 {
 	struct mmci_dmae_priv *dmae = host->dma_priv;
 
@@ -656,7 +662,7 @@ void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data)
 	 * contiguous buffers.  On TX, we'll get a FIFO underrun error.
 	 */
 	if (status & MCI_RXDATAAVLBLMASK) {
-		mmci_dma_data_error(host);
+		mmci_dma_error(host);
 		if (!data->error)
 			data->error = -EIO;
 	} else if (!data->host_cookie) {
@@ -827,13 +833,9 @@ static struct mmci_host_ops mmci_variant_ops = {
 	.dma_release = mmci_dmae_release,
 	.dma_start = mmci_dmae_start,
 	.dma_finalize = mmci_dmae_finalize,
+	.dma_error = mmci_dmae_error,
 };
 #else
-/* Blank functions if the DMA engine is not available */
-static inline void mmci_dma_data_error(struct mmci_host *host)
-{
-}
-
 static struct mmci_host_ops mmci_variant_ops = {};
 #endif
 
@@ -1011,7 +1013,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		u32 remain, success;
 
 		/* Terminate the DMA transfer */
-		mmci_dma_data_error(host);
+		mmci_dma_error(host);
 
 		/*
 		 * Calculate how far we are into the transfer.  Note that
@@ -1157,7 +1159,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	if ((!sbc && !cmd->data) || cmd->error) {
 		if (host->data) {
 			/* Terminate the DMA transfer */
-			mmci_dma_data_error(host);
+			mmci_dma_error(host);
 
 			mmci_stop_data(host);
 		}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index b793cfb..320f122 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -282,6 +282,7 @@ struct mmci_host_ops {
 	void (*dma_release)(struct mmci_host *host);
 	int (*dma_start)(struct mmci_host *host, unsigned int *datactrl);
 	void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data);
+	void (*dma_error)(struct mmci_host *host);
 };
 
 struct mmci_host {
@@ -341,3 +342,4 @@ int mmci_dmae_setup(struct mmci_host *host);
 void mmci_dmae_release(struct mmci_host *host);
 int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl);
 void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data);
+void mmci_dmae_error(struct mmci_host *host);
diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
index f1fd48a..a352115 100644
--- a/drivers/mmc/host/mmci_qcom_dml.c
+++ b/drivers/mmc/host/mmci_qcom_dml.c
@@ -189,6 +189,7 @@ static struct mmci_host_ops qcom_variant_ops = {
 	.dma_release = mmci_dmae_release,
 	.dma_start = mmci_dmae_start,
 	.dma_finalize = mmci_dmae_finalize,
+	.dma_error = mmci_dmae_error,
 };
 
 void qcom_variant_init(struct mmci_host *host)
-- 
2.7.4

  parent reply	other threads:[~2018-09-21  9:47 UTC|newest]

Thread overview: 136+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21  9:45 [PATCH V2 00/27] mmc: mmci: add sdmmc variant for stm32 Ludovic Barre
2018-09-21  9:45 ` Ludovic Barre
2018-09-21  9:45 ` Ludovic Barre
2018-09-21  9:45 ` [PATCH V2 01/27] mmc: mmci: internalize dma map/unmap into mmci dma functions Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-26 23:49   ` Ulf Hansson
2018-09-26 23:49     ` Ulf Hansson
2018-09-21  9:45 ` [PATCH V2 02/27] mmc: mmci: internalize dma_inprogress " Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-26 23:49   ` Ulf Hansson
2018-09-26 23:49     ` Ulf Hansson
2018-09-21  9:45 ` [PATCH V2 03/27] mmc: mmci: convert dma_setup callback to return an int Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-24 14:28   ` Ulf Hansson
2018-09-24 14:28     ` Ulf Hansson
2018-09-24 16:12     ` Ludovic BARRE
2018-09-24 16:12       ` Ludovic BARRE
2018-09-24 16:12       ` Ludovic BARRE
2018-09-26 23:49       ` Ulf Hansson
2018-09-26 23:49         ` Ulf Hansson
2018-09-27  8:55     ` Srinivas Kandagatla
2018-09-27  8:55       ` Srinivas Kandagatla
2018-09-21  9:45 ` [PATCH V2 04/27] mmc: mmci: introduce dma_priv pointer to mmci_host Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-24 18:52   ` Ulf Hansson
2018-09-24 18:52     ` Ulf Hansson
2018-09-25  7:19     ` Ludovic BARRE
2018-09-25  7:19       ` Ludovic BARRE
2018-09-25  7:19       ` Ludovic BARRE
2018-09-21  9:45 ` [PATCH V2 05/27] mmc: mmci: move mmci next cookie to mci host Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-24 18:46   ` Ulf Hansson
2018-09-24 18:46     ` Ulf Hansson
2018-09-25  7:08     ` Ludovic BARRE
2018-09-25  7:08       ` Ludovic BARRE
2018-09-25  7:08       ` Ludovic BARRE
2018-09-21  9:46 ` [PATCH V2 06/27] mmc: mmci: merge prepare data functions Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 07/27] mmc: mmci: add prepare/unprepare_data callbacks Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 08/27] mmc: mmci: add get_next_data callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 09/27] mmc: mmci: modify dma_setup callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-10-01  9:30   ` Ulf Hansson
2018-10-01  9:30     ` Ulf Hansson
2018-10-01  9:43     ` Ludovic BARRE
2018-10-01  9:43       ` Ludovic BARRE
2018-10-01  9:43       ` Ludovic BARRE
2018-09-21  9:46 ` [PATCH V2 10/27] mmc: mmci: add dma_release callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 11/27] mmc: mmci: add dma_start callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 12/27] mmc: mmci: add dma_finalize callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` Ludovic Barre [this message]
2018-09-21  9:46   ` [PATCH V2 13/27] mmc: mmci: add dma_error callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 14/27] mmc: mmci: add validate_data callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 15/27] mmc: mmci: add set_clk/pwrreg callbacks Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 16/27] mmc: mmci: add datactrl block size variant property Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 17/27] mmc: mmci: expand startbiterr to irqmask and error check Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 18/27] mmc: mmci: add variant properties to define cpsm & cmdresp bits Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 19/27] mmc: mmci: add variant property to define dpsm bit Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 20/27] mmc: mmci: add variant property to define irq pio mask Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 21/27] mmc: mmci: add variant property to write datactrl before command Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 22/27] mmc: mmci: add variant property to not read datacnt Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 23/27] mmc: mmci: add variant property to request a reset Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-10-01  9:30   ` Ulf Hansson
2018-10-01  9:30     ` Ulf Hansson
2018-10-01 12:16     ` Ludovic BARRE
2018-10-01 12:16       ` Ludovic BARRE
2018-10-01 12:16       ` Ludovic BARRE
2018-10-01 13:43       ` Ulf Hansson
2018-10-01 13:43         ` Ulf Hansson
2018-09-21  9:46 ` [PATCH V2 24/27] mmc: mmci: add clock divider for stm32 sdmmc Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 25/27] mmc: mmci: add stm32 sdmmc registers Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 26/27] mmc: mmci: add DT bindings for STM32 sdmmc Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-25 15:27   ` Rob Herring
2018-09-25 15:27     ` Rob Herring
2018-10-01  9:30   ` Ulf Hansson
2018-10-01  9:30     ` Ulf Hansson
2018-09-21  9:46 ` [PATCH V2 27/27] mmc: mmci: add stm32 sdmmc variant Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-10-01  9:31   ` Ulf Hansson
2018-10-01  9:31     ` Ulf Hansson
2018-10-01 12:56     ` Ludovic BARRE
2018-10-01 12:56       ` Ludovic BARRE
2018-10-01 12:56       ` Ludovic BARRE
2018-10-01 13:39       ` Ulf Hansson
2018-10-01 13:39         ` Ulf Hansson
2018-10-01 13:53         ` Ludovic BARRE
2018-10-01 13:53           ` Ludovic BARRE
2018-10-01 13:53           ` Ludovic BARRE
  -- strict thread matches above, loose matches on Subject: below --
2018-09-18 10:55 [PATCH V2 00/27] mmc: mmci: add sdmmc variant for stm32 Ludovic Barre
2018-09-18 10:55 ` [PATCH V2 13/27] mmc: mmci: add dma_error callback Ludovic Barre
2018-09-18 10:55   ` Ludovic Barre
2018-09-18 10:55   ` Ludovic Barre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1537523181-14578-14-git-send-email-ludovic.Barre@st.com \
    --to=ludovic.barre@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gerald.baeza@st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=loic.pallardy@st.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.