From: Tony Lindgren <tony@atomide.com> To: linux-arm-kernel@lists.infradead.org Cc: Kevin Hilman <khilman@ti.com>, linux-omap@vger.kernel.org Subject: [PATCH 05/10] omap2+: Use dmtimer macros for clockevent Date: Mon, 20 Jun 2011 02:23:39 -0700 [thread overview] Message-ID: <20110620092339.357.10396.stgit@kaulin> (raw) In-Reply-To: <20110620091754.357.56441.stgit@kaulin> This patch makes timer-gp.c to use only a subset of dmtimer functions without the need to initialize dmtimer code early. Also note that now with the inline functions, timer_set_next_event becomes more efficient in the lines of assembly code. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/timer-gp.c | 147 ++++++++++++++++++++++------- arch/arm/plat-omap/include/plat/dmtimer.h | 1 2 files changed, 113 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index a0d8e83..62c0d5c 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -45,10 +45,33 @@ #include "timer-gp.h" +/* Parent clocks, eventually these will come from the clock framework */ + +#define OMAP2_MPU_SOURCE "sys_ck" +#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE +#define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP2_32K_SOURCE "func_32k_ck" +#define OMAP3_32K_SOURCE "omap_32k_fck" +#define OMAP4_32K_SOURCE "sys_32k_ck" + +#ifdef CONFIG_OMAP_32K_TIMER +#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE +#define OMAP3_SECURE_TIMER 12 +#else +#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE +#define OMAP3_SECURE_TIMER 1 +#endif /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 +/* Clockevent code */ + +static struct omap_dm_timer clkev; static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; static u8 __initdata gptimer_id = 1; @@ -57,10 +80,9 @@ struct omap_dm_timer *gptimer_wakeup; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { - struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id; struct clock_event_device *evt = &clockevent_gpt; - omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW); + __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); evt->event_handler(evt); return IRQ_HANDLED; @@ -75,7 +97,8 @@ static struct irqaction omap2_gp_timer_irq = { static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles); + __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST, + 0xffffffff - cycles, 1); return 0; } @@ -85,13 +108,18 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - omap_dm_timer_stop(gptimer); + __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; + period = clkev.rate / HZ; period -= 1; - omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); + /* Looks like we need to first set the load value separately */ + __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG, + 0xffffffff - period, 1); + __omap_dm_timer_load_start(clkev.io_base, + OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + 0xffffffff - period, 1); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -130,43 +158,89 @@ int __init omap2_gp_clockevent_set_gptimer(u8 id) return 0; } -static void __init omap2_gp_clockevent_init(void) +static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, + int gptimer_id, + const char *fck_source) { - u32 tick_rate; - int src; - char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */ + char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + struct omap_hwmod *oh; + size_t size; + int res = 0; + + sprintf(name, "timer%d", gptimer_id); + omap_hwmod_setup_one(name); + oh = omap_hwmod_lookup(name); + if (!oh) + return -ENODEV; + + timer->irq = oh->mpu_irqs[0].irq; + timer->phys_base = oh->slaves[0]->addr->pa_start; + size = oh->slaves[0]->addr->pa_end - timer->phys_base; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + if (!timer->io_base) + return -ENXIO; + + /* After the dmtimer is using hwmod these clocks won't be needed */ + sprintf(name, "gpt%d_fck", gptimer_id); + timer->fclk = clk_get(NULL, name); + if (IS_ERR(timer->fclk)) + return -ENODEV; + + sprintf(name, "gpt%d_ick", gptimer_id); + timer->iclk = clk_get(NULL, name); + if (IS_ERR(timer->iclk)) { + clk_put(timer->fclk); + return -ENODEV; + } - inited = 1; + omap_hwmod_enable(oh); + + if (gptimer_id != 12) { + struct clk *src; + + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) { + res = -EINVAL; + } else { + res = __omap_dm_timer_set_source(timer->fclk, src); + if (IS_ERR_VALUE(res)) + pr_warning("%s: timer%i cannot set source\n", + __func__, gptimer_id); + clk_put(src); + } + } + __omap_dm_timer_reset(timer->io_base, 1, 1); + timer->posted = 1; + + timer->rate = clk_get_rate(timer->fclk); - sprintf(clockevent_hwmod_name, "timer%d", gptimer_id); - omap_hwmod_setup_one(clockevent_hwmod_name); + timer->reserved = 1; gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); gptimer_wakeup = gptimer; -#if defined(CONFIG_OMAP_32K_TIMER) - src = OMAP_TIMER_SRC_32_KHZ; -#else - src = OMAP_TIMER_SRC_SYS_CLK; - WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " - "secure 32KiHz clock source\n"); -#endif + return res; +} - if (gptimer_id != 12) - WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), - "timer-gp: omap_dm_timer_set_source() failed\n"); +static void __init omap2_gp_clockevent_init(int gptimer_id, + const char *fck_source) +{ + int res; - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + inited = 1; - pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", - gptimer_id, tick_rate); + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + BUG_ON(res); omap2_gp_timer_irq.dev_id = (void *)gptimer; - setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); + setup_irq(clkev.irq, &omap2_gp_timer_irq); - clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC, + __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, clockevent_gpt.shift); clockevent_gpt.max_delta_ns = clockevent_delta2ns(0xffffffff, &clockevent_gpt); @@ -176,6 +250,9 @@ static void __init omap2_gp_clockevent_init(void) clockevent_gpt.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_gpt); + + pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", + gptimer_id, clkev.rate); } /* Clocksource code */ @@ -247,11 +324,11 @@ static void __init omap2_gp_clocksource_init(void) } #endif -#define OMAP_SYS_TIMER_INIT(name) \ +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src) \ static void __init omap##name##_timer_init(void) \ { \ omap_dm_timer_init(); \ - omap2_gp_clockevent_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src); \ omap2_gp_clocksource_init(); \ } @@ -261,14 +338,14 @@ struct sys_timer omap##name##_timer = { \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2) +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE) OMAP_SYS_TIMER(2) #endif #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3) +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE) OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure) +OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE) OMAP_SYS_TIMER(3_secure) #endif @@ -280,7 +357,7 @@ static void __init omap4_timer_init(void) BUG_ON(!twd_base); #endif omap_dm_timer_init(); - omap2_gp_clockevent_init(); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); omap2_gp_clocksource_init(); } OMAP_SYS_TIMER(4) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 54664a7..dd8b3ff 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -216,6 +216,7 @@ struct omap_dm_timer { struct clk *iclk, *fclk; #endif void __iomem *io_base; + unsigned long rate; unsigned reserved:1; unsigned enabled:1; unsigned posted:1;
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 05/10] omap2+: Use dmtimer macros for clockevent Date: Mon, 20 Jun 2011 02:23:39 -0700 [thread overview] Message-ID: <20110620092339.357.10396.stgit@kaulin> (raw) In-Reply-To: <20110620091754.357.56441.stgit@kaulin> This patch makes timer-gp.c to use only a subset of dmtimer functions without the need to initialize dmtimer code early. Also note that now with the inline functions, timer_set_next_event becomes more efficient in the lines of assembly code. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/timer-gp.c | 147 ++++++++++++++++++++++------- arch/arm/plat-omap/include/plat/dmtimer.h | 1 2 files changed, 113 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index a0d8e83..62c0d5c 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -45,10 +45,33 @@ #include "timer-gp.h" +/* Parent clocks, eventually these will come from the clock framework */ + +#define OMAP2_MPU_SOURCE "sys_ck" +#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE +#define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP2_32K_SOURCE "func_32k_ck" +#define OMAP3_32K_SOURCE "omap_32k_fck" +#define OMAP4_32K_SOURCE "sys_32k_ck" + +#ifdef CONFIG_OMAP_32K_TIMER +#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE +#define OMAP3_SECURE_TIMER 12 +#else +#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE +#define OMAP3_SECURE_TIMER 1 +#endif /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 +/* Clockevent code */ + +static struct omap_dm_timer clkev; static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; static u8 __initdata gptimer_id = 1; @@ -57,10 +80,9 @@ struct omap_dm_timer *gptimer_wakeup; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { - struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id; struct clock_event_device *evt = &clockevent_gpt; - omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW); + __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); evt->event_handler(evt); return IRQ_HANDLED; @@ -75,7 +97,8 @@ static struct irqaction omap2_gp_timer_irq = { static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles); + __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST, + 0xffffffff - cycles, 1); return 0; } @@ -85,13 +108,18 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - omap_dm_timer_stop(gptimer); + __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; + period = clkev.rate / HZ; period -= 1; - omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); + /* Looks like we need to first set the load value separately */ + __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG, + 0xffffffff - period, 1); + __omap_dm_timer_load_start(clkev.io_base, + OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + 0xffffffff - period, 1); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -130,43 +158,89 @@ int __init omap2_gp_clockevent_set_gptimer(u8 id) return 0; } -static void __init omap2_gp_clockevent_init(void) +static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, + int gptimer_id, + const char *fck_source) { - u32 tick_rate; - int src; - char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */ + char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + struct omap_hwmod *oh; + size_t size; + int res = 0; + + sprintf(name, "timer%d", gptimer_id); + omap_hwmod_setup_one(name); + oh = omap_hwmod_lookup(name); + if (!oh) + return -ENODEV; + + timer->irq = oh->mpu_irqs[0].irq; + timer->phys_base = oh->slaves[0]->addr->pa_start; + size = oh->slaves[0]->addr->pa_end - timer->phys_base; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + if (!timer->io_base) + return -ENXIO; + + /* After the dmtimer is using hwmod these clocks won't be needed */ + sprintf(name, "gpt%d_fck", gptimer_id); + timer->fclk = clk_get(NULL, name); + if (IS_ERR(timer->fclk)) + return -ENODEV; + + sprintf(name, "gpt%d_ick", gptimer_id); + timer->iclk = clk_get(NULL, name); + if (IS_ERR(timer->iclk)) { + clk_put(timer->fclk); + return -ENODEV; + } - inited = 1; + omap_hwmod_enable(oh); + + if (gptimer_id != 12) { + struct clk *src; + + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) { + res = -EINVAL; + } else { + res = __omap_dm_timer_set_source(timer->fclk, src); + if (IS_ERR_VALUE(res)) + pr_warning("%s: timer%i cannot set source\n", + __func__, gptimer_id); + clk_put(src); + } + } + __omap_dm_timer_reset(timer->io_base, 1, 1); + timer->posted = 1; + + timer->rate = clk_get_rate(timer->fclk); - sprintf(clockevent_hwmod_name, "timer%d", gptimer_id); - omap_hwmod_setup_one(clockevent_hwmod_name); + timer->reserved = 1; gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); gptimer_wakeup = gptimer; -#if defined(CONFIG_OMAP_32K_TIMER) - src = OMAP_TIMER_SRC_32_KHZ; -#else - src = OMAP_TIMER_SRC_SYS_CLK; - WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " - "secure 32KiHz clock source\n"); -#endif + return res; +} - if (gptimer_id != 12) - WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), - "timer-gp: omap_dm_timer_set_source() failed\n"); +static void __init omap2_gp_clockevent_init(int gptimer_id, + const char *fck_source) +{ + int res; - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + inited = 1; - pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", - gptimer_id, tick_rate); + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + BUG_ON(res); omap2_gp_timer_irq.dev_id = (void *)gptimer; - setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); + setup_irq(clkev.irq, &omap2_gp_timer_irq); - clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC, + __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, clockevent_gpt.shift); clockevent_gpt.max_delta_ns = clockevent_delta2ns(0xffffffff, &clockevent_gpt); @@ -176,6 +250,9 @@ static void __init omap2_gp_clockevent_init(void) clockevent_gpt.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_gpt); + + pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", + gptimer_id, clkev.rate); } /* Clocksource code */ @@ -247,11 +324,11 @@ static void __init omap2_gp_clocksource_init(void) } #endif -#define OMAP_SYS_TIMER_INIT(name) \ +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src) \ static void __init omap##name##_timer_init(void) \ { \ omap_dm_timer_init(); \ - omap2_gp_clockevent_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src); \ omap2_gp_clocksource_init(); \ } @@ -261,14 +338,14 @@ struct sys_timer omap##name##_timer = { \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2) +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE) OMAP_SYS_TIMER(2) #endif #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3) +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE) OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure) +OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE) OMAP_SYS_TIMER(3_secure) #endif @@ -280,7 +357,7 @@ static void __init omap4_timer_init(void) BUG_ON(!twd_base); #endif omap_dm_timer_init(); - omap2_gp_clockevent_init(); + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); omap2_gp_clocksource_init(); } OMAP_SYS_TIMER(4) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 54664a7..dd8b3ff 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -216,6 +216,7 @@ struct omap_dm_timer { struct clk *iclk, *fclk; #endif void __iomem *io_base; + unsigned long rate; unsigned reserved:1; unsigned enabled:1; unsigned posted:1;
next prev parent reply other threads:[~2011-06-20 9:23 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-06-20 9:23 [PATCH 00/10] init_early cleanup for omap init_irq and init_timer Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:23 ` [PATCH 01/10] omap: Use separate init_irq functions to avoid cpu_is_omap tests early Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:54 ` Russell King - ARM Linux 2011-06-20 9:54 ` Russell King - ARM Linux 2011-06-20 10:14 ` Tony Lindgren 2011-06-20 10:14 ` Tony Lindgren 2011-06-27 17:08 ` Kevin Hilman 2011-06-27 17:08 ` Kevin Hilman 2011-06-20 9:23 ` [PATCH 02/10] omap: Set separate timer init functions to avoid cpu_is_omap tests Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:23 ` [PATCH 03/10] omap: Move dmtimer defines to dmtimer.h Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:56 ` Russell King - ARM Linux 2011-06-20 9:56 ` Russell King - ARM Linux 2011-06-20 10:17 ` Tony Lindgren 2011-06-20 10:17 ` Tony Lindgren 2011-06-20 9:23 ` [PATCH 04/10] omap: Make a subset of dmtimer functions into inline functions Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren [this message] 2011-06-20 9:23 ` [PATCH 05/10] omap2+: Use dmtimer macros for clockevent Tony Lindgren 2011-06-23 17:07 ` Kevin Hilman 2011-06-23 17:07 ` Kevin Hilman 2011-06-27 7:39 ` Tony Lindgren 2011-06-27 7:39 ` Tony Lindgren 2011-06-20 9:23 ` [PATCH 06/10] omap2+: Remove gptimer_wakeup for now Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:39 ` Santosh Shilimkar 2011-06-20 9:39 ` Santosh Shilimkar 2011-06-20 9:48 ` Tony Lindgren 2011-06-20 9:48 ` Tony Lindgren 2011-06-23 15:05 ` Kevin Hilman 2011-06-23 15:05 ` Kevin Hilman 2011-06-23 15:13 ` Santosh Shilimkar 2011-06-23 15:13 ` Santosh Shilimkar 2011-06-27 8:08 ` Tony Lindgren 2011-06-27 8:08 ` Tony Lindgren 2011-06-27 16:30 ` Kevin Hilman 2011-06-27 16:30 ` Kevin Hilman 2011-06-27 18:16 ` Tony Lindgren 2011-06-27 18:16 ` Tony Lindgren 2011-06-27 17:32 ` Kevin Hilman 2011-06-27 17:32 ` Kevin Hilman 2011-06-27 19:19 ` Tony Lindgren 2011-06-27 19:19 ` Tony Lindgren 2011-06-27 21:16 ` Kevin Hilman 2011-06-27 21:16 ` Kevin Hilman 2011-06-20 9:23 ` [PATCH 07/10] omap2+: Reserve clocksource and timesource and initialize dmtimer later Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-23 17:01 ` Kevin Hilman 2011-06-23 17:01 ` Kevin Hilman 2011-06-27 7:48 ` Tony Lindgren 2011-06-27 7:48 ` Tony Lindgren 2011-06-27 16:41 ` Kevin Hilman 2011-06-27 16:41 ` Kevin Hilman 2011-06-23 17:13 ` Kevin Hilman 2011-06-23 17:13 ` Kevin Hilman 2011-06-27 7:51 ` Tony Lindgren 2011-06-27 7:51 ` Tony Lindgren 2011-06-27 10:44 ` Tony Lindgren 2011-06-27 10:44 ` Tony Lindgren 2011-06-20 9:23 ` [PATCH 08/10] omap2+: Use dmtimer macros for clocksource Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-23 15:28 ` Kevin Hilman 2011-06-23 15:28 ` Kevin Hilman 2011-06-23 16:47 ` Kevin Hilman 2011-06-23 16:47 ` Kevin Hilman 2011-06-23 17:10 ` Kevin Hilman 2011-06-23 17:10 ` Kevin Hilman 2011-06-27 7:54 ` Tony Lindgren 2011-06-27 7:54 ` Tony Lindgren 2011-06-27 10:48 ` Tony Lindgren 2011-06-27 10:48 ` Tony Lindgren 2011-06-27 16:41 ` Kevin Hilman 2011-06-27 16:41 ` Kevin Hilman 2011-06-20 9:23 ` [PATCH 09/10] omap2+: Remove omap2_gp_clockevent_set_gptimer Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren 2011-06-20 9:23 ` [PATCH 10/10] omap2+: Rename timer-gp.c into timer.c to combine timer init functions Tony Lindgren 2011-06-20 9:23 ` Tony Lindgren -- strict thread matches above, loose matches on Subject: below -- 2011-03-28 22:21 [PATCH 00/10] omap init_early changes for irq and timer init Tony Lindgren 2011-03-28 22:21 ` [PATCH 05/10] omap2+: Use dmtimer macros for clockevent Tony Lindgren 2011-03-28 22:21 ` Tony Lindgren 2011-03-29 17:16 ` Tony Lindgren 2011-03-29 17:16 ` Tony Lindgren 2011-03-31 21:35 ` Kevin Hilman 2011-03-31 21:35 ` Kevin Hilman 2011-03-31 22:04 ` Tony Lindgren 2011-03-31 22:04 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20110620092339.357.10396.stgit@kaulin \ --to=tony@atomide.com \ --cc=khilman@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.