All of lore.kernel.org
 help / color / mirror / Atom feed
From: fu.wei@linaro.org
To: rjw@rjwysocki.net, lenb@kernel.org, daniel.lezcano@linaro.org,
	tglx@linutronix.de, marc.zyngier@arm.com, mark.rutland@arm.com,
	lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
	hanjun.guo@linaro.org
Cc: linaro-acpi@lists.linaro.org, catalin.marinas@arm.com,
	will.deacon@arm.com, linux-kernel@vger.kernel.org, wim@iguana.be,
	Fu Wei <fu.wei@linaro.org>,
	wei@redhat.com, al.stone@linaro.org, tn@semihalf.com,
	timur@codeaurora.org, linux-acpi@vger.kernel.org,
	linux@roeck-us.net, harba@codeaurora.org, julien.grall@arm.com,
	linux-watchdog@vger.kernel.org, arnd@arndb.de, jcm@redhat.com,
	cov@codeaurora.org, linux-arm-kernel@lists.infradead.org,
	graeme.gregory@linaro.org, rruigrok@codeaurora.org,
	leo.duran@amd.com, Suravee.Suthikulpanit@amd.com,
	christoffer.dall@linaro.org
Subject: [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver
Date: Wed, 18 Jan 2017 21:25:39 +0800	[thread overview]
Message-ID: <20170118132541.8989-16-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>

From: Fu Wei <fu.wei@linaro.org>

On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.

The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/gtdt.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h      |   1 +
 2 files changed, 125 insertions(+)

diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
index d93a790..91ea6cb 100644
--- a/drivers/acpi/arm64/gtdt.c
+++ b/drivers/acpi/arm64/gtdt.c
@@ -37,6 +37,28 @@ struct acpi_gtdt_descriptor {
 
 static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
 
+static inline void *next_platform_timer(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	platform_timer += gh->length;
+	if (platform_timer < acpi_gtdt_desc.gtdt_end)
+		return platform_timer;
+
+	return NULL;
+}
+
+#define for_each_platform_timer(_g)				\
+	for (_g = acpi_gtdt_desc.platform_timer; _g;	\
+	     _g = next_platform_timer(_g))
+
+static inline bool is_timer_block(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
+}
+
 static int __init map_gt_gsi(u32 interrupt, u32 flags)
 {
 	int trigger, polarity;
@@ -155,3 +177,105 @@ int __init acpi_gtdt_init(struct acpi_table_header *table,
 
 	return ret;
 }
+
+static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
+					 struct arch_timer_mem *data)
+{
+	int i;
+	struct acpi_gtdt_timer_entry *frame;
+
+	if (!block->timer_count) {
+		pr_err(FW_BUG "GT block present, but frame count is zero.");
+		return -ENODEV;
+	}
+
+	if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
+		pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
+		       block->timer_count);
+		return -EINVAL;
+	}
+
+	data->cntctlbase = (phys_addr_t)block->block_address;
+	/*
+	 * According to "Table * CNTCTLBase memory map" of
+	 * <ARM Architecture Reference Manual> for ARMv8,
+	 * The size of the CNTCTLBase frame is 4KB(Offset 0x000 – 0xFFC).
+	 */
+	data->size = SZ_4K;
+	data->num_frames = block->timer_count;
+
+	frame = (void *)block + block->timer_offset;
+	if (frame + block->timer_count != (void *)block + block->header.length)
+		return -EINVAL;
+
+	/*
+	 * Get the GT timer Frame data for every GT Block Timer
+	 */
+	for (i = 0; i < block->timer_count; i++, frame++) {
+		if (!frame->base_address || !frame->timer_interrupt)
+			return -EINVAL;
+
+		data->frame[i].phys_irq = map_gt_gsi(frame->timer_interrupt,
+						     frame->timer_flags);
+		if (data->frame[i].phys_irq <= 0) {
+			pr_warn("failed to map physical timer irq in frame %d.\n",
+				i);
+			return -EINVAL;
+		}
+
+		data->frame[i].virt_irq =
+			map_gt_gsi(frame->virtual_timer_interrupt,
+				   frame->virtual_timer_flags);
+		if (data->frame[i].virt_irq <= 0) {
+			pr_warn("failed to map virtual timer irq in frame %d.\n",
+				i);
+			acpi_unregister_gsi(frame->timer_interrupt);
+			return -EINVAL;
+		}
+
+		data->frame[i].frame_nr = frame->frame_number;
+		data->frame[i].cntbase = frame->base_address;
+		/*
+		 * According to "Table * CNTBaseN memory map" of
+		 * <ARM Architecture Reference Manual> for ARMv8,
+		 * The size of the CNTBaseN frame is 4KB(Offset 0x000 – 0xFFC).
+		 */
+		data->frame[i].size = SZ_4K;
+	}
+
+	return 0;
+}
+
+/**
+ * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
+ * @data:	the pointer to the array of struct arch_timer_mem for returning
+ *		the result of parsing. The element number of this array should
+ *		be platform_timer_count(the total number of platform timers).
+ * @count:	The pointer of int variate for returning the number of GT
+ *		blocks we have parsed.
+ *
+ * Return: 0 if success, -EINVAL/-ENODEV if error.
+ */
+int __init acpi_arch_timer_mem_init(struct arch_timer_mem *data,
+				    int *timer_count)
+{
+	int ret;
+	void *platform_timer;
+
+	*timer_count = 0;
+	for_each_platform_timer(platform_timer) {
+		if (is_timer_block(platform_timer)) {
+			ret = gtdt_parse_timer_block(platform_timer, data);
+			if (ret)
+				return ret;
+			data++;
+			(*timer_count)++;
+		}
+	}
+
+	if (*timer_count)
+		pr_info("found %d memory-mapped timer block(s).\n",
+			*timer_count);
+
+	return 0;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index d0b271e..51e85b9 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -601,6 +601,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
 int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
 int acpi_gtdt_map_ppi(int type);
 bool acpi_gtdt_c3stop(int type);
+int acpi_arch_timer_mem_init(struct arch_timer_mem *data, int *timer_count);
 #endif
 
 #else	/* !CONFIG_ACPI */
-- 
2.9.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: fu.wei@linaro.org
To: rjw@rjwysocki.net, lenb@kernel.org, daniel.lezcano@linaro.org,
	tglx@linutronix.de, marc.zyngier@arm.com, mark.rutland@arm.com,
	lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
	hanjun.guo@linaro.org
Cc: linux-arm-kernel@lists.infradead.org,
	linaro-acpi@lists.linaro.org, linux-kernel@vger.kernel.org,
	linux-acpi@vger.kernel.org, rruigrok@codeaurora.org,
	harba@codeaurora.org, cov@codeaurora.org, timur@codeaurora.org,
	graeme.gregory@linaro.org, al.stone@linaro.org, jcm@redhat.com,
	wei@redhat.com, arnd@arndb.de, catalin.marinas@arm.com,
	will.deacon@arm.com, Suravee.Suthikulpanit@amd.com,
	leo.duran@amd.com, wim@iguana.be, linux@roeck-us.net,
	linux-watchdog@vger.kernel.org, tn@semihalf.com,
	christoffer.dall@linaro.org, julien.grall@arm.com,
	Fu Wei <fu.wei@linaro.org>
Subject: [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver
Date: Wed, 18 Jan 2017 21:25:39 +0800	[thread overview]
Message-ID: <20170118132541.8989-16-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>

From: Fu Wei <fu.wei@linaro.org>

On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.

The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/gtdt.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h      |   1 +
 2 files changed, 125 insertions(+)

diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
index d93a790..91ea6cb 100644
--- a/drivers/acpi/arm64/gtdt.c
+++ b/drivers/acpi/arm64/gtdt.c
@@ -37,6 +37,28 @@ struct acpi_gtdt_descriptor {
 
 static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
 
+static inline void *next_platform_timer(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	platform_timer += gh->length;
+	if (platform_timer < acpi_gtdt_desc.gtdt_end)
+		return platform_timer;
+
+	return NULL;
+}
+
+#define for_each_platform_timer(_g)				\
+	for (_g = acpi_gtdt_desc.platform_timer; _g;	\
+	     _g = next_platform_timer(_g))
+
+static inline bool is_timer_block(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
+}
+
 static int __init map_gt_gsi(u32 interrupt, u32 flags)
 {
 	int trigger, polarity;
@@ -155,3 +177,105 @@ int __init acpi_gtdt_init(struct acpi_table_header *table,
 
 	return ret;
 }
+
+static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
+					 struct arch_timer_mem *data)
+{
+	int i;
+	struct acpi_gtdt_timer_entry *frame;
+
+	if (!block->timer_count) {
+		pr_err(FW_BUG "GT block present, but frame count is zero.");
+		return -ENODEV;
+	}
+
+	if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
+		pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
+		       block->timer_count);
+		return -EINVAL;
+	}
+
+	data->cntctlbase = (phys_addr_t)block->block_address;
+	/*
+	 * According to "Table * CNTCTLBase memory map" of
+	 * <ARM Architecture Reference Manual> for ARMv8,
+	 * The size of the CNTCTLBase frame is 4KB(Offset 0x000 – 0xFFC).
+	 */
+	data->size = SZ_4K;
+	data->num_frames = block->timer_count;
+
+	frame = (void *)block + block->timer_offset;
+	if (frame + block->timer_count != (void *)block + block->header.length)
+		return -EINVAL;
+
+	/*
+	 * Get the GT timer Frame data for every GT Block Timer
+	 */
+	for (i = 0; i < block->timer_count; i++, frame++) {
+		if (!frame->base_address || !frame->timer_interrupt)
+			return -EINVAL;
+
+		data->frame[i].phys_irq = map_gt_gsi(frame->timer_interrupt,
+						     frame->timer_flags);
+		if (data->frame[i].phys_irq <= 0) {
+			pr_warn("failed to map physical timer irq in frame %d.\n",
+				i);
+			return -EINVAL;
+		}
+
+		data->frame[i].virt_irq =
+			map_gt_gsi(frame->virtual_timer_interrupt,
+				   frame->virtual_timer_flags);
+		if (data->frame[i].virt_irq <= 0) {
+			pr_warn("failed to map virtual timer irq in frame %d.\n",
+				i);
+			acpi_unregister_gsi(frame->timer_interrupt);
+			return -EINVAL;
+		}
+
+		data->frame[i].frame_nr = frame->frame_number;
+		data->frame[i].cntbase = frame->base_address;
+		/*
+		 * According to "Table * CNTBaseN memory map" of
+		 * <ARM Architecture Reference Manual> for ARMv8,
+		 * The size of the CNTBaseN frame is 4KB(Offset 0x000 – 0xFFC).
+		 */
+		data->frame[i].size = SZ_4K;
+	}
+
+	return 0;
+}
+
+/**
+ * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
+ * @data:	the pointer to the array of struct arch_timer_mem for returning
+ *		the result of parsing. The element number of this array should
+ *		be platform_timer_count(the total number of platform timers).
+ * @count:	The pointer of int variate for returning the number of GT
+ *		blocks we have parsed.
+ *
+ * Return: 0 if success, -EINVAL/-ENODEV if error.
+ */
+int __init acpi_arch_timer_mem_init(struct arch_timer_mem *data,
+				    int *timer_count)
+{
+	int ret;
+	void *platform_timer;
+
+	*timer_count = 0;
+	for_each_platform_timer(platform_timer) {
+		if (is_timer_block(platform_timer)) {
+			ret = gtdt_parse_timer_block(platform_timer, data);
+			if (ret)
+				return ret;
+			data++;
+			(*timer_count)++;
+		}
+	}
+
+	if (*timer_count)
+		pr_info("found %d memory-mapped timer block(s).\n",
+			*timer_count);
+
+	return 0;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index d0b271e..51e85b9 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -601,6 +601,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
 int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
 int acpi_gtdt_map_ppi(int type);
 bool acpi_gtdt_c3stop(int type);
+int acpi_arch_timer_mem_init(struct arch_timer_mem *data, int *timer_count);
 #endif
 
 #else	/* !CONFIG_ACPI */
-- 
2.9.3

WARNING: multiple messages have this Message-ID (diff)
From: fu.wei@linaro.org
To: rjw@rjwysocki.net, lenb@kernel.org, daniel.lezcano@linaro.org,
	tglx@linutronix.de, marc.zyngier@arm.com, mark.rutland@arm.com,
	lorenzo.pieralisi@arm.com, sudeep.holla@arm.com,
	hanjun.guo@linaro.org
Cc: linux-arm-kernel@lists.infradead.org,
	linaro-acpi@lists.linaro.org, linux-kernel@vger.kernel.org,
	linux-acpi@vger.kernel.org, rruigrok@codeaurora.org,
	harba@codeaurora.org, cov@codeaurora.org, timur@codeaurora.org,
	graeme.gregory@linaro.org, al.stone@linaro.org, jcm@redhat.com,
	wei@redhat.com, arnd@arndb.de, catalin.marinas@arm.com,
	will.deacon@arm.com, Suravee.Suthikulpanit@amd.com,
	leo.duran@amd.com, wim@iguana.be, linux@roeck-us.net,
	linux-watchdog@vger.kernel.org, tn@semihalf.com,
	christoffer.dall@linaro.org, julien.grall@arm.com,
	Fu Wei <fu.wei@linaro.org>
Subject: [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver
Date: Wed, 18 Jan 2017 21:25:39 +0800	[thread overview]
Message-ID: <20170118132541.8989-16-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>

From: Fu Wei <fu.wei@linaro.org>

On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.

The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/gtdt.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h      |   1 +
 2 files changed, 125 insertions(+)

diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
index d93a790..91ea6cb 100644
--- a/drivers/acpi/arm64/gtdt.c
+++ b/drivers/acpi/arm64/gtdt.c
@@ -37,6 +37,28 @@ struct acpi_gtdt_descriptor {
 
 static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
 
+static inline void *next_platform_timer(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	platform_timer += gh->length;
+	if (platform_timer < acpi_gtdt_desc.gtdt_end)
+		return platform_timer;
+
+	return NULL;
+}
+
+#define for_each_platform_timer(_g)				\
+	for (_g = acpi_gtdt_desc.platform_timer; _g;	\
+	     _g = next_platform_timer(_g))
+
+static inline bool is_timer_block(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
+}
+
 static int __init map_gt_gsi(u32 interrupt, u32 flags)
 {
 	int trigger, polarity;
@@ -155,3 +177,105 @@ int __init acpi_gtdt_init(struct acpi_table_header *table,
 
 	return ret;
 }
+
+static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
+					 struct arch_timer_mem *data)
+{
+	int i;
+	struct acpi_gtdt_timer_entry *frame;
+
+	if (!block->timer_count) {
+		pr_err(FW_BUG "GT block present, but frame count is zero.");
+		return -ENODEV;
+	}
+
+	if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
+		pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
+		       block->timer_count);
+		return -EINVAL;
+	}
+
+	data->cntctlbase = (phys_addr_t)block->block_address;
+	/*
+	 * According to "Table * CNTCTLBase memory map" of
+	 * <ARM Architecture Reference Manual> for ARMv8,
+	 * The size of the CNTCTLBase frame is 4KB(Offset 0x000 – 0xFFC).
+	 */
+	data->size = SZ_4K;
+	data->num_frames = block->timer_count;
+
+	frame = (void *)block + block->timer_offset;
+	if (frame + block->timer_count != (void *)block + block->header.length)
+		return -EINVAL;
+
+	/*
+	 * Get the GT timer Frame data for every GT Block Timer
+	 */
+	for (i = 0; i < block->timer_count; i++, frame++) {
+		if (!frame->base_address || !frame->timer_interrupt)
+			return -EINVAL;
+
+		data->frame[i].phys_irq = map_gt_gsi(frame->timer_interrupt,
+						     frame->timer_flags);
+		if (data->frame[i].phys_irq <= 0) {
+			pr_warn("failed to map physical timer irq in frame %d.\n",
+				i);
+			return -EINVAL;
+		}
+
+		data->frame[i].virt_irq =
+			map_gt_gsi(frame->virtual_timer_interrupt,
+				   frame->virtual_timer_flags);
+		if (data->frame[i].virt_irq <= 0) {
+			pr_warn("failed to map virtual timer irq in frame %d.\n",
+				i);
+			acpi_unregister_gsi(frame->timer_interrupt);
+			return -EINVAL;
+		}
+
+		data->frame[i].frame_nr = frame->frame_number;
+		data->frame[i].cntbase = frame->base_address;
+		/*
+		 * According to "Table * CNTBaseN memory map" of
+		 * <ARM Architecture Reference Manual> for ARMv8,
+		 * The size of the CNTBaseN frame is 4KB(Offset 0x000 – 0xFFC).
+		 */
+		data->frame[i].size = SZ_4K;
+	}
+
+	return 0;
+}
+
+/**
+ * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
+ * @data:	the pointer to the array of struct arch_timer_mem for returning
+ *		the result of parsing. The element number of this array should
+ *		be platform_timer_count(the total number of platform timers).
+ * @count:	The pointer of int variate for returning the number of GT
+ *		blocks we have parsed.
+ *
+ * Return: 0 if success, -EINVAL/-ENODEV if error.
+ */
+int __init acpi_arch_timer_mem_init(struct arch_timer_mem *data,
+				    int *timer_count)
+{
+	int ret;
+	void *platform_timer;
+
+	*timer_count = 0;
+	for_each_platform_timer(platform_timer) {
+		if (is_timer_block(platform_timer)) {
+			ret = gtdt_parse_timer_block(platform_timer, data);
+			if (ret)
+				return ret;
+			data++;
+			(*timer_count)++;
+		}
+	}
+
+	if (*timer_count)
+		pr_info("found %d memory-mapped timer block(s).\n",
+			*timer_count);
+
+	return 0;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index d0b271e..51e85b9 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -601,6 +601,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
 int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
 int acpi_gtdt_map_ppi(int type);
 bool acpi_gtdt_c3stop(int type);
+int acpi_arch_timer_mem_init(struct arch_timer_mem *data, int *timer_count);
 #endif
 
 #else	/* !CONFIG_ACPI */
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver
Date: Wed, 18 Jan 2017 21:25:39 +0800	[thread overview]
Message-ID: <20170118132541.8989-16-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>

From: Fu Wei <fu.wei@linaro.org>

On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.

The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.

Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/acpi/arm64/gtdt.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h      |   1 +
 2 files changed, 125 insertions(+)

diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c
index d93a790..91ea6cb 100644
--- a/drivers/acpi/arm64/gtdt.c
+++ b/drivers/acpi/arm64/gtdt.c
@@ -37,6 +37,28 @@ struct acpi_gtdt_descriptor {
 
 static struct acpi_gtdt_descriptor acpi_gtdt_desc __initdata;
 
+static inline void *next_platform_timer(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	platform_timer += gh->length;
+	if (platform_timer < acpi_gtdt_desc.gtdt_end)
+		return platform_timer;
+
+	return NULL;
+}
+
+#define for_each_platform_timer(_g)				\
+	for (_g = acpi_gtdt_desc.platform_timer; _g;	\
+	     _g = next_platform_timer(_g))
+
+static inline bool is_timer_block(void *platform_timer)
+{
+	struct acpi_gtdt_header *gh = platform_timer;
+
+	return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
+}
+
 static int __init map_gt_gsi(u32 interrupt, u32 flags)
 {
 	int trigger, polarity;
@@ -155,3 +177,105 @@ int __init acpi_gtdt_init(struct acpi_table_header *table,
 
 	return ret;
 }
+
+static int __init gtdt_parse_timer_block(struct acpi_gtdt_timer_block *block,
+					 struct arch_timer_mem *data)
+{
+	int i;
+	struct acpi_gtdt_timer_entry *frame;
+
+	if (!block->timer_count) {
+		pr_err(FW_BUG "GT block present, but frame count is zero.");
+		return -ENODEV;
+	}
+
+	if (block->timer_count > ARCH_TIMER_MEM_MAX_FRAMES) {
+		pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
+		       block->timer_count);
+		return -EINVAL;
+	}
+
+	data->cntctlbase = (phys_addr_t)block->block_address;
+	/*
+	 * According to "Table * CNTCTLBase memory map" of
+	 * <ARM Architecture Reference Manual> for ARMv8,
+	 * The size of the CNTCTLBase frame is 4KB(Offset 0x000 ? 0xFFC).
+	 */
+	data->size = SZ_4K;
+	data->num_frames = block->timer_count;
+
+	frame = (void *)block + block->timer_offset;
+	if (frame + block->timer_count != (void *)block + block->header.length)
+		return -EINVAL;
+
+	/*
+	 * Get the GT timer Frame data for every GT Block Timer
+	 */
+	for (i = 0; i < block->timer_count; i++, frame++) {
+		if (!frame->base_address || !frame->timer_interrupt)
+			return -EINVAL;
+
+		data->frame[i].phys_irq = map_gt_gsi(frame->timer_interrupt,
+						     frame->timer_flags);
+		if (data->frame[i].phys_irq <= 0) {
+			pr_warn("failed to map physical timer irq in frame %d.\n",
+				i);
+			return -EINVAL;
+		}
+
+		data->frame[i].virt_irq =
+			map_gt_gsi(frame->virtual_timer_interrupt,
+				   frame->virtual_timer_flags);
+		if (data->frame[i].virt_irq <= 0) {
+			pr_warn("failed to map virtual timer irq in frame %d.\n",
+				i);
+			acpi_unregister_gsi(frame->timer_interrupt);
+			return -EINVAL;
+		}
+
+		data->frame[i].frame_nr = frame->frame_number;
+		data->frame[i].cntbase = frame->base_address;
+		/*
+		 * According to "Table * CNTBaseN memory map" of
+		 * <ARM Architecture Reference Manual> for ARMv8,
+		 * The size of the CNTBaseN frame is 4KB(Offset 0x000 ? 0xFFC).
+		 */
+		data->frame[i].size = SZ_4K;
+	}
+
+	return 0;
+}
+
+/**
+ * acpi_arch_timer_mem_init() - Get the info of all GT blocks in GTDT table.
+ * @data:	the pointer to the array of struct arch_timer_mem for returning
+ *		the result of parsing. The element number of this array should
+ *		be platform_timer_count(the total number of platform timers).
+ * @count:	The pointer of int variate for returning the number of GT
+ *		blocks we have parsed.
+ *
+ * Return: 0 if success, -EINVAL/-ENODEV if error.
+ */
+int __init acpi_arch_timer_mem_init(struct arch_timer_mem *data,
+				    int *timer_count)
+{
+	int ret;
+	void *platform_timer;
+
+	*timer_count = 0;
+	for_each_platform_timer(platform_timer) {
+		if (is_timer_block(platform_timer)) {
+			ret = gtdt_parse_timer_block(platform_timer, data);
+			if (ret)
+				return ret;
+			data++;
+			(*timer_count)++;
+		}
+	}
+
+	if (*timer_count)
+		pr_info("found %d memory-mapped timer block(s).\n",
+			*timer_count);
+
+	return 0;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index d0b271e..51e85b9 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -601,6 +601,7 @@ int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
 int acpi_gtdt_init(struct acpi_table_header *table, int *platform_timer_count);
 int acpi_gtdt_map_ppi(int type);
 bool acpi_gtdt_c3stop(int type);
+int acpi_arch_timer_mem_init(struct arch_timer_mem *data, int *timer_count);
 #endif
 
 #else	/* !CONFIG_ACPI */
-- 
2.9.3

  parent reply	other threads:[~2017-01-18 13:25 UTC|newest]

Thread overview: 134+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-18 13:25 [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei
2017-01-18 13:25 ` fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 01/17] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 02/17] clocksource/drivers/arm_arch_timer: Rename the timer type macros fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 03/17] clocksource/drivers/arm_arch_timer: Rename the PPI enum and its values fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 04/17] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 05/17] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 06/17] clocksource/drivers/arm_arch_timer: rework PPI determination fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 07/17] clocksource/drivers/arm_arch_timer: Separate out device-tree code from arch_timer_detect_rate fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
     [not found]   ` <20170118132541.8989-9-fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-19  8:02     ` Hanjun Guo
2017-01-19  8:02       ` Hanjun Guo
2017-01-19  8:02       ` Hanjun Guo
     [not found]       ` <cafa8c7a-9c7c-51ba-5566-0cfe1fe6f764-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-19  9:44         ` Fu Wei
2017-01-19  9:44           ` Fu Wei
2017-01-19  9:44           ` Fu Wei
2017-01-19 12:41           ` Hanjun Guo
2017-01-19 12:41             ` Hanjun Guo
2017-01-19 12:41             ` Hanjun Guo
2017-01-19 12:41             ` Hanjun Guo
2017-01-24 17:24   ` Mark Rutland
2017-01-24 17:24     ` Mark Rutland
2017-01-25  6:46     ` Fu Wei
2017-01-25  6:46       ` Fu Wei
2017-01-25  6:46       ` Fu Wei
2017-01-25  7:23       ` Fu Wei
2017-01-25  7:23         ` Fu Wei
2017-01-25  7:23         ` Fu Wei
2017-01-25 15:38       ` Christopher Covington
2017-01-25 15:38         ` Christopher Covington
2017-01-25 15:38         ` Christopher Covington
2017-01-25 17:36         ` Mark Rutland
2017-01-25 17:36           ` Mark Rutland
2017-01-25 17:36           ` Mark Rutland
2017-01-26  5:55           ` Fu Wei
2017-01-26  5:55             ` Fu Wei
2017-01-26  5:55             ` Fu Wei
2017-01-25 17:25       ` Mark Rutland
2017-01-25 17:25         ` Mark Rutland
2017-01-25 17:25         ` Mark Rutland
2017-01-26  5:49         ` Fu Wei
2017-01-26  5:49           ` Fu Wei
2017-01-26  5:49           ` Fu Wei
2017-01-30 17:49           ` Mark Rutland
2017-01-30 17:49             ` Mark Rutland
2017-01-30 17:49             ` Mark Rutland
2017-01-31 11:42             ` Mark Rutland
2017-01-31 11:42               ` Mark Rutland
2017-01-31 11:42               ` Mark Rutland
2017-01-31 18:43             ` Fu Wei
2017-01-31 18:43               ` Fu Wei
2017-01-31 18:43               ` Fu Wei
2017-01-31 18:49               ` Mark Rutland
2017-01-31 18:49                 ` Mark Rutland
2017-01-31 18:49                 ` Mark Rutland
2017-01-31 19:07                 ` Fu Wei
2017-01-31 19:07                   ` Fu Wei
2017-01-31 19:07                   ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 09/17] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 10/17] clocksource/drivers/arm_arch_timer: Move arch_timer_needs_of_probing into DT init call fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-19  8:28   ` Hanjun Guo
2017-01-19  8:28     ` Hanjun Guo
2017-01-19  9:47     ` Fu Wei
2017-01-19  9:47       ` Fu Wei
2017-01-19  9:47       ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 12/17] clocksource/drivers/arm_arch_timer: Refactor MMIO timer probing fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-19  9:11   ` Hanjun Guo
2017-01-19  9:11     ` Hanjun Guo
     [not found]     ` <e69d80d1-0954-b1be-817e-c0be6fc24b77-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-19 10:32       ` Fu Wei
2017-01-19 10:32         ` Fu Wei
2017-01-19 10:32         ` Fu Wei
2017-01-19 11:16         ` Mark Rutland
2017-01-19 11:16           ` Mark Rutland
2017-01-19 11:16           ` Mark Rutland
2017-01-19 12:28           ` Fu Wei
2017-01-19 12:28             ` Fu Wei
2017-01-19 12:28             ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 14/17] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` fu.wei [this message]
2017-01-18 13:25   ` [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25 ` [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
     [not found]   ` <20170118132541.8989-17-fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-19  9:16     ` Hanjun Guo
2017-01-19  9:16       ` Hanjun Guo
2017-01-19  9:16       ` Hanjun Guo
2017-01-19 10:02       ` Fu Wei
2017-01-19 10:02         ` Fu Wei
2017-01-19 10:02         ` Fu Wei
2017-01-19 12:42         ` Hanjun Guo
2017-01-19 12:42           ` Hanjun Guo
2017-01-19 12:42           ` Hanjun Guo
2017-01-18 13:25 ` [PATCH v20 17/17] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei
2017-01-18 13:25   ` fu.wei at linaro.org
2017-01-18 13:25   ` fu.wei
2017-01-18 13:25   ` fu.wei
2017-01-19  9:20 ` [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Hanjun Guo
2017-01-19  9:20   ` Hanjun Guo
2017-01-19  9:20   ` Hanjun Guo
2017-01-19 11:06   ` Fu Wei
2017-01-19 11:06     ` Fu Wei
2017-01-19 11:06     ` Fu Wei
2017-01-23 18:54 ` Mark Rutland
2017-01-23 18:54   ` Mark Rutland
2017-01-24  5:11   ` Fu Wei
2017-01-24  5:11     ` Fu Wei
2017-01-24  5:11     ` Fu Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170118132541.8989-16-fu.wei@linaro.org \
    --to=fu.wei@linaro.org \
    --cc=Suravee.Suthikulpanit@amd.com \
    --cc=al.stone@linaro.org \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=cov@codeaurora.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=graeme.gregory@linaro.org \
    --cc=hanjun.guo@linaro.org \
    --cc=harba@codeaurora.org \
    --cc=jcm@redhat.com \
    --cc=julien.grall@arm.com \
    --cc=lenb@kernel.org \
    --cc=leo.duran@amd.com \
    --cc=linaro-acpi@lists.linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=rruigrok@codeaurora.org \
    --cc=sudeep.holla@arm.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=tn@semihalf.com \
    --cc=wei@redhat.com \
    --cc=will.deacon@arm.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.