All of lore.kernel.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Taylor@freedesktop.org, Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [PATCH 05/14] drm/i915/tgl: Add dkl phy registers
Date: Fri, 13 Sep 2019 15:32:42 -0700	[thread overview]
Message-ID: <20190913223251.354877-6-jose.souza@intel.com> (raw)
In-Reply-To: <20190913223251.354877-1-jose.souza@intel.com>

From: Vandita Kulkarni <vandita.kulkarni@intel.com>

These are the registers needed to program Dekel phy. Some register
definitions will be reused from MG PHY definitions, so adding a
comment on those.

Bspec: 49295

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Taylor, Clinton A <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 161 ++++++++++++++++++++++++++++++++
 1 file changed, 161 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8aaf53283200..95a4232c8e0a 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -10105,6 +10105,167 @@ enum skl_power_gate {
 						   _TGL_DPLL1_CFGCR1, \
 						   _TGL_TBTPLL_CFGCR1)
 
+#define _DKL_PHY1_BASE			0x168000
+#define _DKL_PHY2_BASE			0x169000
+#define _DKL_PHY3_BASE			0x16A000
+#define _DKL_PHY4_BASE			0x16B000
+#define _DKL_PHY5_BASE			0x16C000
+#define _DKL_PHY6_BASE			0x16D000
+
+/* DEKEL PHY MMIO Address = Phy base + (internal address & ~index_mask) */
+#define _DKL_PLL_DIV0			0x200
+#define   DKL_PLL_DIV0_INTEG_COEFF(x)	((x) << 16)
+#define   DKL_PLL_DIV0_INTEG_COEFF_MASK	(0x1F << 16)
+#define   DKL_PLL_DIV0_PROP_COEFF(x)	((x) << 12)
+#define   DKL_PLL_DIV0_PROP_COEFF_MASK	(0xF << 12)
+#define   DKL_PLL_DIV0_FBPREDIV_SHIFT   (8)
+#define   DKL_PLL_DIV0_FBPREDIV(x)	((x) << DKL_PLL_DIV0_FBPREDIV_SHIFT)
+#define   DKL_PLL_DIV0_FBPREDIV_MASK	(0xF << DKL_PLL_DIV0_FBPREDIV_SHIFT)
+#define   DKL_PLL_DIV0_FBDIV_INT(x)	((x) << 0)
+#define   DKL_PLL_DIV0_FBDIV_INT_MASK	(0xFF << 0)
+#define DKL_PLL_DIV0(tc_port)		_MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
+						    _DKL_PHY2_BASE) + \
+						    _DKL_PLL_DIV0)
+
+#define _DKL_PLL_DIV1				0x204
+#define   DKL_PLL_DIV1_IREF_TRIM(x)		((x) << 16)
+#define   DKL_PLL_DIV1_IREF_TRIM_MASK		(0x1F << 16)
+#define   DKL_PLL_DIV1_TDC_TARGET_CNT(x)	((x) << 0)
+#define   DKL_PLL_DIV1_TDC_TARGET_CNT_MASK	(0xFF << 0)
+#define DKL_PLL_DIV1(tc_port)		_MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
+						    _DKL_PHY2_BASE) + \
+						    _DKL_PLL_DIV1)
+
+#define _DKL_PLL_SSC				0x210
+#define   DKL_PLL_SSC_IREF_NDIV_RATIO(x)	((x) << 29)
+#define   DKL_PLL_SSC_IREF_NDIV_RATIO_MASK	(0x7 << 29)
+#define   DKL_PLL_SSC_STEP_LEN(x)		((x) << 16)
+#define   DKL_PLL_SSC_STEP_LEN_MASK		(0xFF << 16)
+#define   DKL_PLL_SSC_STEP_NUM(x)		((x) << 11)
+#define   DKL_PLL_SSC_STEP_NUM_MASK		(0x7 << 11)
+#define   DKL_PLL_SSC_EN			(1 << 9)
+#define DKL_PLL_SSC(tc_port)		_MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
+						    _DKL_PHY2_BASE) + \
+						    _DKL_PLL_SSC)
+
+#define _DKL_PLL_BIAS			0x214
+#define   DKL_PLL_BIAS_FRAC_EN_H	(1 << 30)
+#define   DKL_PLL_BIAS_FBDIV_SHIFT	(8)
+#define   DKL_PLL_BIAS_FBDIV_FRAC(x)	((x) << DKL_PLL_BIAS_FBDIV_SHIFT)
+#define   DKL_PLL_BIAS_FBDIV_FRAC_MASK	(0x3FFFFF << DKL_PLL_BIAS_FBDIV_SHIFT)
+#define DKL_PLL_BIAS(tc_port)		_MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
+						    _DKL_PHY2_BASE) + \
+						    _DKL_PLL_BIAS)
+
+#define _DKL_PLL_TDC_COLDST_BIAS		0x218
+#define   DKL_PLL_TDC_SSC_STEP_SIZE(x)		((x) << 8)
+#define   DKL_PLL_TDC_SSC_STEP_SIZE_MASK	(0xFF << 8)
+#define   DKL_PLL_TDC_FEED_FWD_GAIN(x)		((x) << 0)
+#define   DKL_PLL_TDC_FEED_FWD_GAIN_MASK	(0xFF << 0)
+#define DKL_PLL_TDC_COLDST_BIAS(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_PLL_TDC_COLDST_BIAS)
+
+#define _DKL_REFCLKIN_CTL		0x12C
+/* Bits are the same as MG_REFCLKIN_CTL */
+#define DKL_REFCLKIN_CTL(tc_port)	_MMIO(_PORT(tc_port, \
+						    _DKL_PHY1_BASE, \
+						    _DKL_PHY2_BASE) + \
+					      _DKL_REFCLKIN_CTL)
+
+#define _DKL_CLKTOP2_HSCLKCTL		0xD4
+/* Bits are the same as MG_CLKTOP2_HSCLKCTL */
+#define DKL_CLKTOP2_HSCLKCTL(tc_port)	_MMIO(_PORT(tc_port, \
+						    _DKL_PHY1_BASE, \
+						    _DKL_PHY2_BASE) + \
+					      _DKL_CLKTOP2_HSCLKCTL)
+
+#define _DKL_CLKTOP2_CORECLKCTL1		0xD8
+/* Bits are the same as MG_CLKTOP2_CORECLKCTL1 */
+#define DKL_CLKTOP2_CORECLKCTL1(tc_port)	_MMIO(_PORT(tc_port, \
+							    _DKL_PHY1_BASE, \
+							    _DKL_PHY2_BASE) + \
+						      _DKL_CLKTOP2_CORECLKCTL1)
+
+#define _DKL_TX_DPCNTL0				0x2C0
+#define  DKL_TX_PRESHOOT_COEFF(x)			((x) << 13)
+#define  DKL_TX_PRESHOOT_COEFF_MASK			(0x1f << 13)
+#define  DKL_TX_DE_EMPHASIS_COEFF(x)		((x) << 8)
+#define  DKL_TX_DE_EMPAHSIS_COEFF_MASK		(0x1f << 8)
+#define  DKL_TX_VSWING_CONTROL(x)			((x) << 0)
+#define  DKL_TX_VSWING_CONTROL_MASK			(0x7 << 0)
+#define DKL_TX_DPCNTL0(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_TX_DPCNTL0)
+
+#define _DKL_TX_DPCNTL1				0x2C4
+/* Bits are the same as DKL_TX_DPCNTRL0 */
+#define DKL_TX_DPCNTL1(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_TX_DPCNTL1)
+
+#define _DKL_TX_DPCNTL2				0x2C8
+#define  DKL_TX_DP20BITMODE				(1 << 2)
+#define DKL_TX_DPCNTL2(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_TX_DPCNTL2)
+
+#define _DKL_TX_FW_CALIB				0x2F8
+#define  DKL_TX_CFG_DISABLE_WAIT_INIT			(1 << 7)
+#define DKL_TX_FW_CALIB(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_TX_FW_CALIB)
+
+#define _DKL_TX_DW17					0xDC4
+#define DKL_TX_DW17(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_TX_DW17)
+
+#define _DKL_TX_DW18					0xDC8
+#define DKL_TX_DW18(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_TX_DW18)
+
+#define _DKL_DP_MODE					0xA0
+#define  DKL_DP_MODE_CFG_GAONPWR_GATING		(1 << 1)
+#define  DKL_DP_MODE_CFG_DIGPWR_GATING		(1 << 2)
+#define  DKL_DP_MODE_CFG_CLNPWR_GATING		(1 << 3)
+#define  DKL_DP_MODE_CFG_TRPWR_GATING		(1 << 4)
+#define  DKL_DP_MODE_CFG_TR2PWR_GATING		(1 << 5)
+#define  DKL_DP_MODE_CFG_GATING_CTRL_MASK	(0x1f << 1)
+#define  DKL_DP_MODE_CFG_DP_X1_MODE			(1 << 6)
+#define  DKL_DP_MODE_CFG_DP_X2_MODE			(1 << 7)
+#define DKL_DP_MODE(tc_port) _MMIO(_PORT(tc_port, \
+						     _DKL_PHY1_BASE, \
+						     _DKL_PHY2_BASE) + \
+						     _DKL_DP_MODE)
+
+#define _DKL_CMN_UC_DW27			0x36C
+#define  DKL_CMN_UC_DW27_UC_HEALTH		(0x1 << 15)
+#define DKL_CMN_UC_DW_27(tc_port)		_MMIO(_PORT(tc_port, \
+							    _DKL_PHY1_BASE, \
+							    _DKL_PHY2_BASE) + \
+							    _DKL_CMN_UC_DW27)
+
+/*
+ * Each Dekel PHY is addressed through a 4KB aperture. Each PHY has more than
+ * 4KB of register space, so a separate index is programmed in HIP_INDEX_REG0
+ * or HIP_INDEX_REG1, based on the port number, to set the upper 2 address
+ * bits that point the 4KB window into the full PHY register space.
+ */
+#define _HIP_INDEX_REG0		0x1010A0
+#define _HIP_INDEX_REG1		0x1010A4
+#define HIP_INDEX_REG(tc_port)	_MMIO((tc_port) < 4 \
+				      ? _HIP_INDEX_REG0 \
+				      : _HIP_INDEX_REG1)
+
 /* BXT display engine PLL */
 #define BXT_DE_PLL_CTL			_MMIO(0x6d000)
 #define   BXT_DE_PLL_RATIO(x)		(x)	/* {60,65,100} * 19.2MHz */
-- 
2.23.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-09-13 22:32 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 22:32 [PATCH 00/14] TGL TC enabling José Roberto de Souza
2019-09-13 22:32 ` [PATCH 01/14] drm/i915/tgl: Add missing ddi clock select during DP init sequence José Roberto de Souza
2019-09-13 22:32 ` [PATCH 02/14] drm/i915/tgl: TC helper function to return pin mapping José Roberto de Souza
2019-09-14  5:54   ` Lucas De Marchi
2019-09-17 21:15     ` Souza, Jose
2019-09-13 22:32 ` [PATCH 03/14] drm/i915/tgl: Finish modular FIA support on registers José Roberto de Souza
2019-09-14  6:24   ` Lucas De Marchi
2019-09-18  1:08     ` Souza, Jose
2019-09-13 22:32 ` [PATCH 04/14] drm/i915/tgl: Fix driver crash when update_active_dpll is called José Roberto de Souza
2019-09-14  6:32   ` Lucas De Marchi
2019-09-17 22:59     ` Souza, Jose
2019-09-13 22:32 ` José Roberto de Souza [this message]
2019-09-13 22:32 ` [PATCH 06/14] drm/i915/tgl: Add initial dkl pll support José Roberto de Souza
2019-09-13 22:32 ` [PATCH 07/14] drm/i915/tgl: Add support for dkl pll write José Roberto de Souza
2019-09-14  6:41   ` Lucas De Marchi
2019-09-16  8:48     ` Jani Nikula
2019-09-13 22:32 ` [PATCH 08/14] drm/i915/tgl: Add dkl phy programming sequences José Roberto de Souza
2019-09-13 22:32 ` [PATCH 09/14] drm/i915/icl: Unify disable and enable phy clock gating functions José Roberto de Souza
2019-09-13 22:32 ` [PATCH 10/14] drm/i915/tgl: Fix dkl phy register space addressing José Roberto de Souza
2019-09-14  7:26   ` Lucas De Marchi
2019-09-18 19:55     ` Souza, Jose
2019-09-13 22:32 ` [PATCH 11/14] drm/i915/tgl: Check the UC health of tc controllers after power on José Roberto de Souza
2019-09-13 22:32 ` [PATCH 12/14] drm/i915: Add dkl phy pll calculations José Roberto de Souza
2019-09-14  7:38   ` Lucas De Marchi
2019-09-13 22:32 ` [PATCH 13/14] drm/i915/tgl: Use dkl pll hardcoded values José Roberto de Souza
2019-09-13 22:32 ` [PATCH 14/14] drm/i915/tgl: initialize TC and TBT ports José Roberto de Souza
2019-09-13 22:53 ` ✗ Fi.CI.CHECKPATCH: warning for TGL TC enabling Patchwork
2019-09-13 23:12 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-15  7:07 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190913223251.354877-6-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=Taylor@freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.