From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
To: linus.walleij@linaro.org, brgl@bgdev.pl, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, wens@csie.org,
jic23@kernel.org, lee.jones@linaro.org, sre@kernel.org,
broonie@kernel.org, gregkh@linuxfoundation.org,
lgirdwood@gmail.com
Cc: lars@metafoo.de, rafael@kernel.org, quic_gurus@quicinc.com,
sebastian.reichel@collabora.com, andy.shevchenko@gmail.com,
michael@walle.cc, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-iio@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 08/16] mfd: axp20x: Add support for AXP192
Date: Sat, 18 Jun 2022 22:40:01 +0100 [thread overview]
Message-ID: <20220618214009.2178567-9-aidanmacdonald.0x0@gmail.com> (raw)
In-Reply-To: <20220618214009.2178567-1-aidanmacdonald.0x0@gmail.com>
The AXP192 PMIC is similar to the AXP202/AXP209, but with different
regulators, additional GPIOs, and a different IRQ register layout.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
drivers/mfd/axp20x-i2c.c | 2 +
drivers/mfd/axp20x.c | 153 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 84 ++++++++++++++++++++
3 files changed, 239 insertions(+)
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index 00ab48018d8d..9ada58fad77f 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -62,6 +62,7 @@ static int axp20x_i2c_remove(struct i2c_client *i2c)
#ifdef CONFIG_OF
static const struct of_device_id axp20x_i2c_of_match[] = {
{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
+ { .compatible = "x-powers,axp192", .data = (void *)AXP192_ID },
{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
@@ -75,6 +76,7 @@ MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
static const struct i2c_device_id axp20x_i2c_id[] = {
{ "axp152", 0 },
+ { "axp192", 0 },
{ "axp202", 0 },
{ "axp209", 0 },
{ "axp221", 0 },
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 8161a5dc68e8..1011e668589a 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -34,6 +34,7 @@
static const char * const axp20x_model_names[] = {
"AXP152",
+ "AXP192",
"AXP202",
"AXP209",
"AXP221",
@@ -92,6 +93,35 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+static const struct regmap_range axp192_writeable_ranges[] = {
+ regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
+ regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
+ regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
+};
+
+static const struct regmap_range axp192_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
+ regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
+ regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
+ regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
+ regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
+ regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
+ regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
+ regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
+ regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
+};
+
+static const struct regmap_access_table axp192_writeable_table = {
+ .yes_ranges = axp192_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp192_writeable_ranges),
+};
+
+static const struct regmap_access_table axp192_volatile_table = {
+ .yes_ranges = axp192_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp192_volatile_ranges),
+};
+
/* AXP22x ranges are shared with the AXP809, as they cover the same range */
static const struct regmap_range axp22x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
@@ -173,6 +203,25 @@ static const struct resource axp152_pek_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
};
+static const struct resource axp192_gpio_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO0_INPUT, "GPIO0"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO1_INPUT, "GPIO1"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO2_INPUT, "GPIO2"),
+};
+
+static const struct resource axp192_ac_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
+};
+
+static const struct resource axp192_usb_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
+ DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
+};
+
static const struct resource axp20x_ac_power_supply_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
@@ -245,6 +294,15 @@ static const struct regmap_config axp152_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static const struct regmap_config axp192_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp192_writeable_table,
+ .volatile_table = &axp192_volatile_table,
+ .max_register = AXP20X_CC_CTRL,
+ .cache_type = REGCACHE_RBTREE,
+};
+
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -304,6 +362,55 @@ static const struct regmap_irq axp152_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT, 2, 0),
};
+static const struct regmap_irq axp192_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP192, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP192, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH, 1, 1),
+ INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW, 1, 0),
+ INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW, 2, 6),
+ INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG, 2, 5),
+ INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG, 2, 4),
+ INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG, 2, 3),
+ INIT_REGMAP_IRQ(AXP192, PEK_SHORT, 2, 1),
+ INIT_REGMAP_IRQ(AXP192, PEK_LONG, 2, 0),
+ INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON, 3, 7),
+ INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF, 3, 6),
+ INIT_REGMAP_IRQ(AXP192, VBUS_VALID, 3, 5),
+ INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID, 3, 4),
+ INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID, 3, 3),
+ INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END, 3, 2),
+ INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL, 3, 0),
+ INIT_REGMAP_IRQ(AXP192, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT, 4, 2),
+ INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT, 4, 0),
+};
+
+static int axp192_get_irq_reg(unsigned int base_reg, int i)
+{
+ /* linear mapping for IRQ1 to IRQ4 */
+ if (i < 4)
+ return base_reg + i;
+
+ /* handle IRQ5 separately */
+ if (base_reg == AXP192_IRQ1_EN)
+ return AXP192_IRQ5_EN;
+ else
+ return AXP192_IRQ5_STATE;
+}
+
static const struct regmap_irq axp20x_regmap_irqs[] = {
INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
@@ -514,6 +621,19 @@ static const struct regmap_irq_chip axp152_regmap_irq_chip = {
.num_regs = 3,
};
+static const struct regmap_irq_chip axp192_regmap_irq_chip = {
+ .name = "axp192_irq_chip",
+ .status_base = AXP192_IRQ1_STATE,
+ .ack_base = AXP192_IRQ1_STATE,
+ .mask_base = AXP192_IRQ1_EN,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .irqs = axp192_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp192_regmap_irqs),
+ .num_regs = 5,
+ .get_irq_reg = axp192_get_irq_reg,
+};
+
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
@@ -588,6 +708,33 @@ static const struct regmap_irq_chip axp809_regmap_irq_chip = {
.num_regs = 5,
};
+static const struct mfd_cell axp192_cells[] = {
+ {
+ .name = "axp192-gpio",
+ .of_compatible = "x-powers,axp192-gpio",
+ .num_resources = ARRAY_SIZE(axp192_gpio_resources),
+ .resources = axp192_gpio_resources,
+ }, {
+ .name = "axp20x-regulator",
+ }, {
+ .name = "axp192-adc",
+ .of_compatible = "x-powers,axp192-adc",
+ }, {
+ .name = "axp20x-battery-power-supply",
+ .of_compatible = "x-powers,axp192-battery-power-supply",
+ }, {
+ .name = "axp20x-ac-power-supply",
+ .of_compatible = "x-powers,axp202-ac-power-supply",
+ .num_resources = ARRAY_SIZE(axp192_ac_power_supply_resources),
+ .resources = axp192_ac_power_supply_resources,
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .of_compatible = "x-powers,axp192-usb-power-supply",
+ .num_resources = ARRAY_SIZE(axp192_usb_power_supply_resources),
+ .resources = axp192_usb_power_supply_resources,
+ }
+};
+
static const struct mfd_cell axp20x_cells[] = {
{
.name = "axp20x-gpio",
@@ -865,6 +1012,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
axp20x->regmap_cfg = &axp152_regmap_config;
axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
break;
+ case AXP192_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp192_cells);
+ axp20x->cells = axp192_cells;
+ axp20x->regmap_cfg = &axp192_regmap_config;
+ axp20x->regmap_irq_chip = &axp192_regmap_irq_chip;
+ break;
case AXP202_ID:
case AXP209_ID:
axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 9ab0e2fca7ea..18546e124919 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -12,6 +12,7 @@
enum axp20x_variants {
AXP152_ID = 0,
+ AXP192_ID,
AXP202_ID,
AXP209_ID,
AXP221_ID,
@@ -24,6 +25,7 @@ enum axp20x_variants {
NR_AXP20X_VARIANTS,
};
+#define AXP192_DATACACHE(m) (0x06 + (m))
#define AXP20X_DATACACHE(m) (0x04 + (m))
/* Power supply */
@@ -45,6 +47,13 @@ enum axp20x_variants {
#define AXP152_DCDC_FREQ 0x37
#define AXP152_DCDC_MODE 0x80
+#define AXP192_USB_OTG_STATUS 0x04
+#define AXP192_PWR_OUT_CTRL 0x12
+#define AXP192_DCDC2_V_OUT 0x23
+#define AXP192_DCDC1_V_OUT 0x26
+#define AXP192_DCDC3_V_OUT 0x27
+#define AXP192_LDO2_3_V_OUT 0x28
+
#define AXP20X_PWR_INPUT_STATUS 0x00
#define AXP20X_PWR_OP_MODE 0x01
#define AXP20X_USB_OTG_STATUS 0x02
@@ -139,6 +148,17 @@ enum axp20x_variants {
#define AXP152_IRQ2_STATE 0x49
#define AXP152_IRQ3_STATE 0x4a
+#define AXP192_IRQ1_EN 0x40
+#define AXP192_IRQ2_EN 0x41
+#define AXP192_IRQ3_EN 0x42
+#define AXP192_IRQ4_EN 0x43
+#define AXP192_IRQ1_STATE 0x44
+#define AXP192_IRQ2_STATE 0x45
+#define AXP192_IRQ3_STATE 0x46
+#define AXP192_IRQ4_STATE 0x47
+#define AXP192_IRQ5_EN 0x4a
+#define AXP192_IRQ5_STATE 0x4d
+
#define AXP20X_IRQ1_EN 0x40
#define AXP20X_IRQ2_EN 0x41
#define AXP20X_IRQ3_EN 0x42
@@ -153,6 +173,11 @@ enum axp20x_variants {
#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
+#define AXP192_GPIO2_V_ADC_H 0x68
+#define AXP192_GPIO2_V_ADC_L 0x69
+#define AXP192_GPIO3_V_ADC_H 0x6a
+#define AXP192_GPIO3_V_ADC_L 0x6b
+
#define AXP20X_ACIN_V_ADC_H 0x56
#define AXP20X_ACIN_V_ADC_L 0x57
#define AXP20X_ACIN_I_ADC_H 0x58
@@ -182,6 +207,8 @@ enum axp20x_variants {
#define AXP20X_IPSOUT_V_HIGH_L 0x7f
/* Power supply */
+#define AXP192_GPIO30_IN_RANGE 0x85
+
#define AXP20X_DCDC_MODE 0x80
#define AXP20X_ADC_EN1 0x82
#define AXP20X_ADC_EN2 0x83
@@ -210,6 +237,16 @@ enum axp20x_variants {
#define AXP152_PWM1_FREQ_Y 0x9c
#define AXP152_PWM1_DUTY_CYCLE 0x9d
+#define AXP192_GPIO0_CTRL 0x90
+#define AXP192_LDO_IO0_V_OUT 0x91
+#define AXP192_GPIO1_CTRL 0x92
+#define AXP192_GPIO2_CTRL 0x93
+#define AXP192_GPIO2_0_STATE 0x94
+#define AXP192_GPIO4_3_CTRL 0x95
+#define AXP192_GPIO4_3_STATE 0x96
+#define AXP192_GPIO2_0_PULL 0x97
+#define AXP192_N_RSTO_CTRL 0x9e
+
#define AXP20X_GPIO0_CTRL 0x90
#define AXP20X_LDO5_V_OUT 0x91
#define AXP20X_GPIO1_CTRL 0x92
@@ -287,6 +324,17 @@ enum axp20x_variants {
#define AXP288_FG_TUNE5 0xed
/* Regulators IDs */
+enum {
+ AXP192_DCDC1 = 0,
+ AXP192_DCDC2,
+ AXP192_DCDC3,
+ AXP192_LDO1,
+ AXP192_LDO2,
+ AXP192_LDO3,
+ AXP192_LDO_IO0,
+ AXP192_REG_ID_MAX,
+};
+
enum {
AXP20X_LDO1 = 0,
AXP20X_LDO2,
@@ -440,6 +488,42 @@ enum {
AXP152_IRQ_GPIO0_INPUT,
};
+enum axp192_irqs {
+ AXP192_IRQ_ACIN_OVER_V = 1,
+ AXP192_IRQ_ACIN_PLUGIN,
+ AXP192_IRQ_ACIN_REMOVAL,
+ AXP192_IRQ_VBUS_OVER_V,
+ AXP192_IRQ_VBUS_PLUGIN,
+ AXP192_IRQ_VBUS_REMOVAL,
+ AXP192_IRQ_VBUS_V_LOW,
+ AXP192_IRQ_BATT_PLUGIN,
+ AXP192_IRQ_BATT_REMOVAL,
+ AXP192_IRQ_BATT_ENT_ACT_MODE,
+ AXP192_IRQ_BATT_EXIT_ACT_MODE,
+ AXP192_IRQ_CHARG,
+ AXP192_IRQ_CHARG_DONE,
+ AXP192_IRQ_BATT_TEMP_HIGH,
+ AXP192_IRQ_BATT_TEMP_LOW,
+ AXP192_IRQ_DIE_TEMP_HIGH,
+ AXP192_IRQ_CHARG_I_LOW,
+ AXP192_IRQ_DCDC1_V_LONG,
+ AXP192_IRQ_DCDC2_V_LONG,
+ AXP192_IRQ_DCDC3_V_LONG,
+ AXP192_IRQ_PEK_SHORT = 22,
+ AXP192_IRQ_PEK_LONG,
+ AXP192_IRQ_N_OE_PWR_ON,
+ AXP192_IRQ_N_OE_PWR_OFF,
+ AXP192_IRQ_VBUS_VALID,
+ AXP192_IRQ_VBUS_NOT_VALID,
+ AXP192_IRQ_VBUS_SESS_VALID,
+ AXP192_IRQ_VBUS_SESS_END,
+ AXP192_IRQ_LOW_PWR_LVL = 31,
+ AXP192_IRQ_TIMER,
+ AXP192_IRQ_GPIO2_INPUT = 37,
+ AXP192_IRQ_GPIO1_INPUT,
+ AXP192_IRQ_GPIO0_INPUT,
+};
+
enum {
AXP20X_IRQ_ACIN_OVER_V = 1,
AXP20X_IRQ_ACIN_PLUGIN,
--
2.35.1
next prev parent reply other threads:[~2022-06-18 21:40 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-18 21:39 [PATCH v3 00/16] Add support for AXP192 PMIC Aidan MacDonald
2022-06-18 21:39 ` [PATCH v3 01/16] regmap-irq: Use sub_irq_reg() to calculate unmask register address Aidan MacDonald
2022-06-18 21:39 ` [PATCH v3 02/16] regmap-irq: Add get_irq_reg to support unusual register layouts Aidan MacDonald
2022-06-18 21:39 ` [PATCH v3 03/16] dt-bindings: mfd: add bindings for AXP192 MFD device Aidan MacDonald
2022-06-19 3:21 ` Chen-Yu Tsai
2022-06-18 21:39 ` [PATCH v3 04/16] dt-bindings: iio: adc: axp209: Add AXP192 compatible Aidan MacDonald
2022-06-19 3:26 ` Chen-Yu Tsai
2022-06-18 21:39 ` [PATCH v3 05/16] dt-bindings: power: supply: axp20x: " Aidan MacDonald
2022-06-19 3:34 ` Chen-Yu Tsai
2022-06-18 21:39 ` [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings Aidan MacDonald
2022-06-19 11:12 ` Krzysztof Kozlowski
2022-06-19 17:20 ` Rob Herring
2022-06-18 21:40 ` [PATCH v3 07/16] dt-bindings: power: axp20x-battery: Add AXP192 compatible Aidan MacDonald
2022-06-18 21:40 ` Aidan MacDonald [this message]
2022-06-19 10:44 ` [PATCH v3 08/16] mfd: axp20x: Add support for AXP192 Andy Shevchenko
2022-06-18 21:40 ` [PATCH v3 09/16] regulator: " Aidan MacDonald
2022-06-19 10:46 ` Andy Shevchenko
2022-06-18 21:40 ` [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups Aidan MacDonald
2022-06-19 3:56 ` Chen-Yu Tsai
2022-06-19 11:01 ` Jonathan Cameron
2022-06-19 10:51 ` Andy Shevchenko
2022-06-18 21:40 ` [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192 Aidan MacDonald
2022-06-19 10:55 ` Andy Shevchenko
2022-06-19 11:13 ` Jonathan Cameron
2022-06-19 15:11 ` Aidan MacDonald
2022-06-18 21:40 ` [PATCH v3 12/16] power: supply: axp20x_usb_power: " Aidan MacDonald
2022-06-19 3:34 ` Chen-Yu Tsai
2022-06-19 11:02 ` Andy Shevchenko
2022-06-18 21:40 ` [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver Aidan MacDonald
2022-06-18 21:59 ` Randy Dunlap
2022-06-19 11:20 ` Andy Shevchenko
2022-06-19 11:25 ` Andy Shevchenko
2022-06-27 8:10 ` Michael Walle
2022-06-27 13:12 ` Aidan MacDonald
2022-06-30 7:26 ` Michael Walle
2022-07-01 15:51 ` Aidan MacDonald
2022-06-18 21:40 ` [PATCH v3 14/16] power: axp20x_battery: Add constant charge current table Aidan MacDonald
2022-06-19 11:29 ` Andy Shevchenko
2022-06-18 21:40 ` [PATCH v3 15/16] power: axp20x_battery: Support battery status without fuel gauge Aidan MacDonald
2022-06-18 21:40 ` [PATCH v3 16/16] power: axp20x_battery: Add support for AXP192 Aidan MacDonald
[not found] ` <CAHp75VfrzQFq4u0vMtPM7LRYNcQQC-padQ1yyFijbpWx8_LwBQ@mail.gmail.com>
2022-06-19 11:17 ` [PATCH v3 00/16] Add support for AXP192 PMIC Jonathan Cameron
2022-06-19 11:12 ` Andy Shevchenko
2022-06-19 14:54 ` Aidan MacDonald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220618214009.2178567-9-aidanmacdonald.0x0@gmail.com \
--to=aidanmacdonald.0x0@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=michael@walle.cc \
--cc=quic_gurus@quicinc.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=sre@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.