RadioTap Archive on
 help / color / Atom feed
* [RFA] A-MPDU EOF bit
@ 2018-01-26 10:50 Johannes Berg
       [not found] ` <>
  0 siblings, 1 reply; 4+ messages in thread
From: Johannes Berg @ 2018-01-26 10:50 UTC (permalink / raw)
  To: radiotap-S783fYmB3Ccdnm+yROfE0A

Hi all,

As previously mentioned, here's my RFA for the EOF bit in the A-MPDU

For HE in particular, we need to be able to capture the EOF bit in an
A-MPDU, but it also applies in VHT where single frames are really A-
MPDUs with just a single frame inside.

The change to make is the following:

 | **0x0010** | delimiter CRC error |
 | **0x0020** | delimiter CRC value known: the delimiter CRC value field is valid |
-| **0xffc0** | reserved |
+| **0x0040** | EOF value |
+| **0x0080** | EOF value known |
+| **0xff00** | reserved |

I have a patch to implement it in a generator here:
(I'll follow up with a driver patch, we have it but not pushed out yet)

Richard has a change for wireshark here:

Hereby starting the 3-week discussion period :-)


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-26 10:50 [RFA] A-MPDU EOF bit Johannes Berg
     [not found] ` <>
2018-01-30  8:28   ` Johannes Berg
2018-02-20  9:29   ` [ADOPTION] " Johannes Berg
     [not found]     ` <>
2018-06-18 13:59       ` Johannes Berg

RadioTap Archive on

Archives are clonable:
	git clone --mirror radiotap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 radiotap radiotap/ \
	public-inbox-index radiotap

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone