[PATCH AUTOSEL 4.19 001/191] s390/qeth: uninstall IRQ handler on device removal

[PATCH AUTOSEL 4.19 001/191] s390/qeth: uninstall IRQ handler on device removal

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 121ca39aa5585def682a2c8592983442438b84dc ]

When setting up, qeth installs its IRQ handler on the ccw devices. But
the IRQ handler is not cleared on removal - so even after qeth yields
control of the ccw devices, spurious interrupts would still be presented
to us.

Make (de-)installation of the IRQ handler part of the ccw channel
setup/removal helpers, and while at it also add the appropriate locking.
Shift around qeth_setup_channel() to avoid a forward declaration for
qeth_irq().

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 102 ++++++++++++++++--------------
 1 file changed, 54 insertions(+), 48 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 461afc276db72..81e2c591acb0b 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -901,44 +901,6 @@ static void qeth_send_control_data_cb(struct qeth_channel *channel,
 	qeth_release_buffer(channel, iob);
 }
 
-static int qeth_setup_channel(struct qeth_channel *channel, bool alloc_buffers)
-{
-	int cnt;
-
-	QETH_DBF_TEXT(SETUP, 2, "setupch");
-
-	channel->ccw = kmalloc(sizeof(struct ccw1), GFP_KERNEL | GFP_DMA);
-	if (!channel->ccw)
-		return -ENOMEM;
-	channel->state = CH_STATE_DOWN;
-	atomic_set(&channel->irq_pending, 0);
-	init_waitqueue_head(&channel->wait_q);
-
-	if (!alloc_buffers)
-		return 0;
-
-	for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++) {
-		channel->iob[cnt].data =
-			kzalloc(QETH_BUFSIZE, GFP_DMA|GFP_KERNEL);
-		if (channel->iob[cnt].data == NULL)
-			break;
-		channel->iob[cnt].state = BUF_STATE_FREE;
-		channel->iob[cnt].channel = channel;
-		channel->iob[cnt].callback = qeth_send_control_data_cb;
-		channel->iob[cnt].rc = 0;
-	}
-	if (cnt < QETH_CMD_BUFFER_NO) {
-		kfree(channel->ccw);
-		while (cnt-- > 0)
-			kfree(channel->iob[cnt].data);
-		return -ENOMEM;
-	}
-	channel->io_buf_no = 0;
-	spin_lock_init(&channel->iob_lock);
-
-	return 0;
-}
-
 static int qeth_set_thread_start_bit(struct qeth_card *card,
 		unsigned long thread)
 {
@@ -1339,14 +1301,61 @@ static void qeth_free_buffer_pool(struct qeth_card *card)
 
 static void qeth_clean_channel(struct qeth_channel *channel)
 {
+	struct ccw_device *cdev = channel->ccwdev;
 	int cnt;
 
 	QETH_DBF_TEXT(SETUP, 2, "freech");
+
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	cdev->handler = NULL;
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
 	for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++)
 		kfree(channel->iob[cnt].data);
 	kfree(channel->ccw);
 }
 
+static int qeth_setup_channel(struct qeth_channel *channel, bool alloc_buffers)
+{
+	struct ccw_device *cdev = channel->ccwdev;
+	int cnt;
+
+	QETH_DBF_TEXT(SETUP, 2, "setupch");
+
+	channel->ccw = kmalloc(sizeof(struct ccw1), GFP_KERNEL | GFP_DMA);
+	if (!channel->ccw)
+		return -ENOMEM;
+	channel->state = CH_STATE_DOWN;
+	atomic_set(&channel->irq_pending, 0);
+	init_waitqueue_head(&channel->wait_q);
+
+	spin_lock_irq(get_ccwdev_lock(cdev));
+	cdev->handler = qeth_irq;
+	spin_unlock_irq(get_ccwdev_lock(cdev));
+
+	if (!alloc_buffers)
+		return 0;
+
+	for (cnt = 0; cnt < QETH_CMD_BUFFER_NO; cnt++) {
+		channel->iob[cnt].data =
+			kzalloc(QETH_BUFSIZE, GFP_DMA|GFP_KERNEL);
+		if (channel->iob[cnt].data == NULL)
+			break;
+		channel->iob[cnt].state = BUF_STATE_FREE;
+		channel->iob[cnt].channel = channel;
+		channel->iob[cnt].callback = qeth_send_control_data_cb;
+		channel->iob[cnt].rc = 0;
+	}
+	if (cnt < QETH_CMD_BUFFER_NO) {
+		qeth_clean_channel(channel);
+		return -ENOMEM;
+	}
+	channel->io_buf_no = 0;
+	spin_lock_init(&channel->iob_lock);
+
+	return 0;
+}
+
 static void qeth_set_single_write_queues(struct qeth_card *card)
 {
 	if ((atomic_read(&card->qdio.state) != QETH_QDIO_UNINITIALIZED) &&
@@ -1498,7 +1507,7 @@ static void qeth_core_sl_print(struct seq_file *m, struct service_level *slr)
 			CARD_BUS_ID(card), card->info.mcl_level);
 }
 
-static struct qeth_card *qeth_alloc_card(void)
+static struct qeth_card *qeth_alloc_card(struct ccwgroup_device *gdev)
 {
 	struct qeth_card *card;
 
@@ -1507,6 +1516,11 @@ static struct qeth_card *qeth_alloc_card(void)
 	if (!card)
 		goto out;
 	QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
+
+	card->gdev = gdev;
+	CARD_RDEV(card) = gdev->cdev[0];
+	CARD_WDEV(card) = gdev->cdev[1];
+	CARD_DDEV(card) = gdev->cdev[2];
 	if (qeth_setup_channel(&card->read, true))
 		goto out_ip;
 	if (qeth_setup_channel(&card->write, true))
@@ -5745,7 +5759,7 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev)
 
 	QETH_DBF_TEXT_(SETUP, 2, "%s", dev_name(&gdev->dev));
 
-	card = qeth_alloc_card();
+	card = qeth_alloc_card(gdev);
 	if (!card) {
 		QETH_DBF_TEXT_(SETUP, 2, "1err%d", -ENOMEM);
 		rc = -ENOMEM;
@@ -5761,15 +5775,7 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev)
 			goto err_card;
 	}
 
-	card->read.ccwdev  = gdev->cdev[0];
-	card->write.ccwdev = gdev->cdev[1];
-	card->data.ccwdev  = gdev->cdev[2];
 	dev_set_drvdata(&gdev->dev, card);
-	card->gdev = gdev;
-	gdev->cdev[0]->handler = qeth_irq;
-	gdev->cdev[1]->handler = qeth_irq;
-	gdev->cdev[2]->handler = qeth_irq;
-
 	qeth_setup_card(card);
 	rc = qeth_update_from_chp_desc(card);
 	if (rc)
-- 
2.20.1

[PATCH AUTOSEL 4.19 002/191] s390/qeth: invoke softirqs after napi_schedule()

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 4d19db777a2f32c9b76f6fd517ed8960576cb43e ]

Calling napi_schedule() from process context does not ensure that the
NET_RX softirq is run in a timely fashion. So trigger it manually.

This is no big issue with current code. A call to ndo_open() is usually
followed by a ndo_set_rx_mode() call, and for qeth this contains a
spin_unlock_bh(). Except for OSN, where qeth_l2_set_rx_mode() bails out
early.
Nevertheless it's best to not depend on this behaviour, and just fix
the issue at its source like all other drivers do. For instance see
commit 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule").

Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_l2_main.c | 3 +++
 drivers/s390/net/qeth_l3_main.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index c1c35eccd5b65..95669d47c389e 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -789,7 +789,10 @@ static int __qeth_l2_open(struct net_device *dev)
 
 	if (qdio_stop_irq(card->data.ccwdev, 0) >= 0) {
 		napi_enable(&card->napi);
+		local_bh_disable();
 		napi_schedule(&card->napi);
+		/* kick-start the NAPI softirq: */
+		local_bh_enable();
 	} else
 		rc = -EIO;
 	return rc;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 9c5e801b3f6cb..52e0ae4dc7241 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2414,7 +2414,10 @@ static int __qeth_l3_open(struct net_device *dev)
 
 	if (qdio_stop_irq(card->data.ccwdev, 0) >= 0) {
 		napi_enable(&card->napi);
+		local_bh_disable();
 		napi_schedule(&card->napi);
+		/* kick-start the NAPI softirq: */
+		local_bh_enable();
 	} else
 		rc = -EIO;
 	return rc;
-- 
2.20.1

[PATCH AUTOSEL 4.19 003/191] media: vsp1: Fix vsp1_regs.h license header

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

[ Upstream commit 5eea860a6fec1e60709d19832015ee0991d3e80c ]

All source files of the vsp1 driver are licensed under the GPLv2+ except
for vsp1_regs.h which is licensed under GPLv2. This is caused by a bad
copy&paste that dates back from the initial version of the driver. Fix
it.

Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Sergei Shtylyov<sergei.shtylyov@cogentembedded.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vsp1/vsp1_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h
index 3738ff2f7b850..f6e4157095cc0 100644
--- a/drivers/media/platform/vsp1/vsp1_regs.h
+++ b/drivers/media/platform/vsp1/vsp1_regs.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * vsp1_regs.h  --  R-Car VSP1 Registers Definitions
  *
-- 
2.20.1

[PATCH AUTOSEL 4.19 004/191] media: vsp1: Fix YCbCr planar formats pitch calculation

[Sasha Levin]

From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>

[ Upstream commit 9b2798d5b71c50f64c41a40f0cbcae47c3fbd067 ]

YCbCr planar formats can have different pitch values for the luma and
chroma planes. This isn't taken into account in the driver. Fix it.

Based on a BSP patch from Koji Matsuoka <koji.matsuoka.xm@renesas.com>.

Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support")
[Updated documentation of the struct vsp1_du_atomic_config pitch field]

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vsp1/vsp1_drm.c | 11 ++++++++++-
 include/media/vsp1.h                   |  2 +-
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index b9c0f695d002b..8d86f618ec776 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -770,6 +770,7 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
 	struct vsp1_device *vsp1 = dev_get_drvdata(dev);
 	struct vsp1_drm_pipeline *drm_pipe = &vsp1->drm->pipe[pipe_index];
 	const struct vsp1_format_info *fmtinfo;
+	unsigned int chroma_hsub;
 	struct vsp1_rwpf *rpf;
 
 	if (rpf_index >= vsp1->info->rpf_count)
@@ -810,10 +811,18 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
 		return -EINVAL;
 	}
 
+	/*
+	 * Only formats with three planes can affect the chroma planes pitch.
+	 * All formats with two planes have a horizontal subsampling value of 2,
+	 * but combine U and V in a single chroma plane, which thus results in
+	 * the luma plane and chroma plane having the same pitch.
+	 */
+	chroma_hsub = (fmtinfo->planes == 3) ? fmtinfo->hsub : 1;
+
 	rpf->fmtinfo = fmtinfo;
 	rpf->format.num_planes = fmtinfo->planes;
 	rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
-	rpf->format.plane_fmt[1].bytesperline = cfg->pitch;
+	rpf->format.plane_fmt[1].bytesperline = cfg->pitch / chroma_hsub;
 	rpf->alpha = cfg->alpha;
 
 	rpf->mem.addr[0] = cfg->mem[0];
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 3093b9cb9067e..5b383d01c84a0 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 /**
  * struct vsp1_du_atomic_config - VSP atomic configuration parameters
  * @pixelformat: plane pixel format (V4L2 4CC)
- * @pitch: line pitch in bytes, for all planes
+ * @pitch: line pitch in bytes for the first plane
  * @mem: DMA memory address for each plane of the frame buffer
  * @src: source rectangle in the frame buffer (integer coordinates)
  * @dst: destination rectangle on the display (integer coordinates)
-- 
2.20.1

[PATCH AUTOSEL 4.19 005/191] media: ov2680: don't register the v4l2 subdevice before checking chip ID

[Sasha Levin]

From: Javier Martinez Canillas <javierm@redhat.com>

[ Upstream commit b7a417628abf49dae98cb80a272dc133b0e4d1a3 ]

The driver registers the v4l2 subdevice before attempting to power on the
chip and checking its ID. This means that a media device driver that it's
waiting for this subdevice to be bound, will prematurely expose its media
device node to userspace because if something goes wrong the media entity
will be cleaned up again on the ov2680 probe function.

This also simplifies the probe function error path since no initialization
is made before attempting to enable the resources or checking the chip ID.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2680.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index f753a1c333ef9..3ccd584568fb5 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -1088,26 +1088,20 @@ static int ov2680_probe(struct i2c_client *client)
 
 	mutex_init(&sensor->lock);
 
-	ret = ov2680_v4l2_init(sensor);
+	ret = ov2680_check_id(sensor);
 	if (ret < 0)
 		goto lock_destroy;
 
-	ret = ov2680_check_id(sensor);
+	ret = ov2680_v4l2_init(sensor);
 	if (ret < 0)
-		goto error_cleanup;
+		goto lock_destroy;
 
 	dev_info(dev, "ov2680 init correctly\n");
 
 	return 0;
 
-error_cleanup:
-	dev_err(dev, "ov2680 init fail: %d\n", ret);
-
-	media_entity_cleanup(&sensor->sd.entity);
-	v4l2_async_unregister_subdev(&sensor->sd);
-	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
-
 lock_destroy:
+	dev_err(dev, "ov2680 init fail: %d\n", ret);
 	mutex_destroy(&sensor->lock);
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.19 006/191] PCI/ACPI: Correct error message for ASPM disabling

[Sasha Levin]

From: Sinan Kaya <okaya@kernel.org>

[ Upstream commit 1ad61b612b95980a4d970c52022aa01dfc0f6068 ]

If _OSC execution fails today for platforms without an _OSC entry, code is
printing a misleading message saying disabling ASPM as follows:

  acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

We need to ensure that platform supports ASPM to begin with.

Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/pci_root.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 7433035ded955..e465e720eab20 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -455,8 +455,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
 	decode_osc_support(root, "OS supports", support);
 	status = acpi_pci_osc_support(root, support);
 	if (ACPI_FAILURE(status)) {
-		dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
-			 acpi_format_exception(status));
+		dev_info(&device->dev, "_OSC failed (%s)%s\n",
+			 acpi_format_exception(status),
+			 pcie_aspm_support_enabled() ? "; disabling ASPM" : "");
 		*no_aspm = 1;
 		return;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 007/191] net: socionext: Fix two sleep-in-atomic-context bugs in ave_rxfifo_reset()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 0020f5c807ef67954d9210eea0ba17a6134cdf7d ]

The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.17 are:

[FUNC] usleep_range
drivers/net/ethernet/socionext/sni_ave.c, 892:
	usleep_range in ave_rxfifo_reset
drivers/net/ethernet/socionext/sni_ave.c, 932:
	ave_rxfifo_reset in ave_irq_handler

[FUNC] usleep_range
drivers/net/ethernet/socionext/sni_ave.c, 888:
	usleep_range in ave_rxfifo_reset
drivers/net/ethernet/socionext/sni_ave.c, 932:
	ave_rxfifo_reset in ave_irq_handler

To fix these bugs, usleep_range() is replaced with udelay().

These bugs are found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/sni_ave.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index f27d67a4d3045..09d25b87cf7c0 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -906,11 +906,11 @@ static void ave_rxfifo_reset(struct net_device *ndev)
 
 	/* assert reset */
 	writel(AVE_GRR_RXFFR, priv->base + AVE_GRR);
-	usleep_range(40, 50);
+	udelay(50);
 
 	/* negate reset */
 	writel(0, priv->base + AVE_GRR);
-	usleep_range(10, 20);
+	udelay(20);
 
 	/* negate interrupt status */
 	writel(AVE_GI_RXOVF, priv->base + AVE_GISR);
-- 
2.20.1

[PATCH AUTOSEL 4.19 008/191] PCI: mediatek: Fix unchecked return value

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 17a0a1e5f6c4bd6df17834312ff577c1373d87b8 ]

Check return value of devm_pci_remap_iospace().

Addresses-Coverity-ID: 1471965 ("Unchecked return value")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mediatek.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index c5ff6ca65eab2..0d100f56cb884 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -1120,7 +1120,9 @@ static int mtk_pcie_request_resources(struct mtk_pcie *pcie)
 	if (err < 0)
 		return err;
 
-	devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start);
+	err = devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start);
+	if (err)
+		return err;
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 009/191] ARM: dts: xilinx: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit f5054ceed420b1f38d37920a4c65446fcc5d6b90 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"
arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2"
arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1"

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/zynq-zc702.dts       | 12 ++++++------
 arch/arm/boot/dts/zynq-zc770-xm010.dts |  2 +-
 arch/arm/boot/dts/zynq-zc770-xm013.dts |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cc5a3dc2b4a08..27cd6cb52f1ba 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -174,17 +174,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			hwmon@52 {
+			hwmon@34 {
 				compatible = "ti,ucd9248";
-				reg = <52>;
+				reg = <0x34>;
 			};
-			hwmon@53 {
+			hwmon@35 {
 				compatible = "ti,ucd9248";
-				reg = <53>;
+				reg = <0x35>;
 			};
-			hwmon@54 {
+			hwmon@36 {
 				compatible = "ti,ucd9248";
-				reg = <54>;
+				reg = <0x36>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 0e1bfdd3421ff..0dd352289a45e 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -68,7 +68,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	flash@0 {
+	flash@1 {
 		compatible = "sst25wf080", "jedec,spi-nor";
 		reg = <1>;
 		spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 651913f1afa2a..4ae2c85df3a00 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -62,7 +62,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	eeprom: eeprom@0 {
+	eeprom: eeprom@2 {
 		at25,byte-len = <8192>;
 		at25,addr-mode = <2>;
 		at25,page-size = <32>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 010/191] serial: uartps: Fix suspend functionality

[Sasha Levin]

From: Nava kishore Manne <nava.manne@xilinx.com>

[ Upstream commit 4b9d33c6a30688344a3e95179654ea31b07f59b7 ]

The driver's suspend/resume functions were buggy.
If UART node contains any child node in the DT and
the child is established a communication path with
the parent UART. The relevant /dev/ttyPS* node will
be not available for other operations.
If the driver is trying to do any operations like
suspend/resume without checking the tty->dev status
it leads to the kernel crash/hang.

This patch fix this issue by call the device_may_wake()
with the generic parameter of type struct device.
in the uart suspend and resume paths.

It also fixes a race condition in the uart suspend
path(i.e uart_suspend_port() should be called at the
end of cdns_uart_suspend API this path updates the same)

Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/xilinx_uartps.c | 41 +++++++++---------------------
 1 file changed, 12 insertions(+), 29 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 77efa0a43fe76..66d49d5118853 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1279,24 +1279,11 @@ static struct uart_driver cdns_uart_uart_driver = {
 static int cdns_uart_suspend(struct device *device)
 {
 	struct uart_port *port = dev_get_drvdata(device);
-	struct tty_struct *tty;
-	struct device *tty_dev;
-	int may_wake = 0;
-
-	/* Get the tty which could be NULL so don't assume it's valid */
-	tty = tty_port_tty_get(&port->state->port);
-	if (tty) {
-		tty_dev = tty->dev;
-		may_wake = device_may_wakeup(tty_dev);
-		tty_kref_put(tty);
-	}
+	int may_wake;
 
-	/*
-	 * Call the API provided in serial_core.c file which handles
-	 * the suspend.
-	 */
-	uart_suspend_port(&cdns_uart_uart_driver, port);
-	if (!(console_suspend_enabled && !may_wake)) {
+	may_wake = device_may_wakeup(device);
+
+	if (console_suspend_enabled && may_wake) {
 		unsigned long flags = 0;
 
 		spin_lock_irqsave(&port->lock, flags);
@@ -1311,7 +1298,11 @@ static int cdns_uart_suspend(struct device *device)
 		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
-	return 0;
+	/*
+	 * Call the API provided in serial_core.c file which handles
+	 * the suspend.
+	 */
+	return uart_suspend_port(&cdns_uart_uart_driver, port);
 }
 
 /**
@@ -1325,17 +1316,9 @@ static int cdns_uart_resume(struct device *device)
 	struct uart_port *port = dev_get_drvdata(device);
 	unsigned long flags = 0;
 	u32 ctrl_reg;
-	struct tty_struct *tty;
-	struct device *tty_dev;
-	int may_wake = 0;
-
-	/* Get the tty which could be NULL so don't assume it's valid */
-	tty = tty_port_tty_get(&port->state->port);
-	if (tty) {
-		tty_dev = tty->dev;
-		may_wake = device_may_wakeup(tty_dev);
-		tty_kref_put(tty);
-	}
+	int may_wake;
+
+	may_wake = device_may_wakeup(device);
 
 	if (console_suspend_enabled && !may_wake) {
 		struct cdns_uart *cdns_uart = port->private_data;
-- 
2.20.1

[PATCH AUTOSEL 4.19 011/191] serial: samsung: Enable baud clock for UART reset procedure in resume

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 1ff3652bc7111df26b5807037f624be294cf69d5 ]

Ensure that the baud clock is also enabled for UART register writes in
driver resume. On Exynos5433 SoC this is needed to avoid external abort
issue.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index c6058b52d5d59..2a49b6d876b87 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1944,7 +1944,11 @@ static int s3c24xx_serial_resume(struct device *dev)
 
 	if (port) {
 		clk_prepare_enable(ourport->clk);
+		if (!IS_ERR(ourport->baudclk))
+			clk_prepare_enable(ourport->baudclk);
 		s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
+		if (!IS_ERR(ourport->baudclk))
+			clk_disable_unprepare(ourport->baudclk);
 		clk_disable_unprepare(ourport->clk);
 
 		uart_resume_port(&s3c24xx_uart_drv, port);
@@ -1967,7 +1971,11 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
 			if (rx_enabled(port))
 				uintm &= ~S3C64XX_UINTM_RXD_MSK;
 			clk_prepare_enable(ourport->clk);
+			if (!IS_ERR(ourport->baudclk))
+				clk_prepare_enable(ourport->baudclk);
 			wr_regl(port, S3C64XX_UINTM, uintm);
+			if (!IS_ERR(ourport->baudclk))
+				clk_disable_unprepare(ourport->baudclk);
 			clk_disable_unprepare(ourport->clk);
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 012/191] serial: mxs-auart: Fix potential infinite loop

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ]

On the error path of mxs_auart_request_gpio_irq() is performed
backward iterating with index i of enum type. Underline enum type
may be unsigned char. In this case check (--i >= 0) will be always
true and error handling goes into infinite loop.

The patch changes the check so that it is valid for signed and unsigned
types.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/mxs-auart.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 34acdf29713d7..4c188f4079b3e 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1634,8 +1634,9 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
 
 	/*
 	 * If something went wrong, rollback.
+	 * Be careful: i may be unsigned.
 	 */
-	while (err && (--i >= 0))
+	while (err && (i-- > 0))
 		if (irq[i] >= 0)
 			free_irq(irq[i], s);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 013/191] tty: serial: qcom_geni_serial: Fix serial when not used as console

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit c362272bdea32bf048d6916b0a2dc485eb9cf787 ]

If you've got the "console" serial port setup to use just as a UART
(AKA there is no "console=ttyMSMX" on the kernel command line) then
certain initialization is skipped.  When userspace later tries to do
something with the port then things go boom (specifically, on my
system, some sort of exception hit that caused the system to reboot
itself w/ no error messages).

Let's cleanup / refactor the init so that we always run the same init
code regardless of whether we're using the console.

To make this work, we make rely on qcom_geni_serial_pm doing its job
to turn resources on.

For the record, here is a trace of the order of things (after this
patch) when console= is specified on the command line and we have an
agetty on the port:
  qcom_geni_serial_pm: 4 (undefined) => 0 (on)
  qcom_geni_console_setup
  qcom_geni_serial_port_setup
  qcom_geni_serial_console_write
  qcom_geni_serial_startup
  qcom_geni_serial_start_tx

...and here is the order of things (after this patch) when console= is
_NOT_ specified on the command line and we have an agetty port:
  qcom_geni_serial_pm: 4 => 0
  qcom_geni_serial_pm: 0 => 3
  qcom_geni_serial_pm: 3 => 0
  qcom_geni_serial_startup
  qcom_geni_serial_port_setup
  qcom_geni_serial_pm: 0 => 3
  qcom_geni_serial_pm: 3 => 0
  qcom_geni_serial_startup
  qcom_geni_serial_start_tx

Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 55 +++++++++++++--------------
 1 file changed, 26 insertions(+), 29 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 5b96df4ad5b30..69b980bb8ac29 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -851,6 +851,23 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 	unsigned int rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
+	u32 proto;
+
+	if (uart_console(uport))
+		port->tx_bytes_pw = 1;
+	else
+		port->tx_bytes_pw = 4;
+	port->rx_bytes_pw = RX_BYTES_PW;
+
+	proto = geni_se_read_proto(&port->se);
+	if (proto != GENI_SE_UART) {
+		dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
+		return -ENXIO;
+	}
+
+	qcom_geni_serial_stop_rx(uport);
+
+	get_tx_fifo_size(port);
 
 	set_rfr_wm(port);
 	writel_relaxed(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
@@ -874,30 +891,19 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 			return -ENOMEM;
 	}
 	port->setup = true;
+
 	return 0;
 }
 
 static int qcom_geni_serial_startup(struct uart_port *uport)
 {
 	int ret;
-	u32 proto;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
 	scnprintf(port->name, sizeof(port->name),
 		  "qcom_serial_%s%d",
 		(uart_console(uport) ? "console" : "uart"), uport->line);
 
-	if (!uart_console(uport)) {
-		port->tx_bytes_pw = 4;
-		port->rx_bytes_pw = RX_BYTES_PW;
-	}
-	proto = geni_se_read_proto(&port->se);
-	if (proto != GENI_SE_UART) {
-		dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto);
-		return -ENXIO;
-	}
-
-	get_tx_fifo_size(port);
 	if (!port->setup) {
 		ret = qcom_geni_serial_port_setup(uport);
 		if (ret)
@@ -1056,6 +1062,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
+	int ret;
 
 	if (co->index >= GENI_UART_CONS_PORTS  || co->index < 0)
 		return -ENXIO;
@@ -1071,21 +1078,10 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
 	if (unlikely(!uport->membase))
 		return -ENXIO;
 
-	if (geni_se_resources_on(&port->se)) {
-		dev_err(port->se.dev, "Error turning on resources\n");
-		return -ENXIO;
-	}
-
-	if (unlikely(geni_se_read_proto(&port->se) != GENI_SE_UART)) {
-		geni_se_resources_off(&port->se);
-		return -ENXIO;
-	}
-
 	if (!port->setup) {
-		port->tx_bytes_pw = 1;
-		port->rx_bytes_pw = RX_BYTES_PW;
-		qcom_geni_serial_stop_rx(uport);
-		qcom_geni_serial_port_setup(uport);
+		ret = qcom_geni_serial_port_setup(uport);
+		if (ret)
+			return ret;
 	}
 
 	if (options)
@@ -1203,11 +1199,12 @@ static void qcom_geni_serial_pm(struct uart_port *uport,
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
+	/* If we've never been called, treat it as off */
+	if (old_state == UART_PM_STATE_UNDEFINED)
+		old_state = UART_PM_STATE_OFF;
+
 	if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF)
 		geni_se_resources_on(&port->se);
-	else if (!uart_console(uport) && (new_state == UART_PM_STATE_ON &&
-				old_state == UART_PM_STATE_UNDEFINED))
-		geni_se_resources_on(&port->se);
 	else if (new_state == UART_PM_STATE_OFF &&
 			old_state == UART_PM_STATE_ON)
 		geni_se_resources_off(&port->se);
-- 
2.20.1

[PATCH AUTOSEL 4.19 014/191] arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 3bc1572068e3896b60d86f9c0fb56d1cef28201c ]

AM65 has two PCIe controllers and each PCIe controller has '2' address
spaces one within the 4GB address space of the SoC and the other above
the 4GB address space of the SoC (cbass_main) in addition to the
register space. The size of the address space above the 4GB SoC address
space is 4GB. These address ranges will be used by CPU/DMA to access
the PCIe address space. In order to represent the address space above
the 4GB SoC address space and to represent the size of this address
space as 4GB, change address-cells and size-cells of interconnect to 2.

Since OSPI has similar need in MCU Domain Memory Map, change
address-cells and size-cells of cbass_mcu interconnect also to 2.

Fixes: ea47eed33a3fe3d919 ("arm64: dts: ti: Add Support for AM654 SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 10 +++---
 arch/arm64/boot/dts/ti/k3-am65.dtsi      | 44 ++++++++++++------------
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 2409344df4fa2..faace3805c014 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -8,13 +8,13 @@
 &cbass_main {
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x01800000 0x10000>,	/* GICD */
-		      <0x01880000 0x90000>;	/* GICR */
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
@@ -23,7 +23,7 @@
 
 		gic_its: gic-its@18200000 {
 			compatible = "arm,gic-v3-its";
-			reg = <0x01820000 0x10000>;
+			reg = <0x00 0x01820000 0x00 0x10000>;
 			msi-controller;
 			#msi-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index cede1fa0983c9..ded364d208351 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -46,38 +46,38 @@
 
 	cbass_main: interconnect@100000 {
 		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
-			 <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
-			 <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
-			 <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
-			 <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
 			 /* MCUSS Range */
-			 <0x28380000 0x00 0x28380000 0x03880000>,
-			 <0x40200000 0x00 0x40200000 0x00900100>,
-			 <0x42040000 0x00 0x42040000 0x03ac2400>,
-			 <0x45100000 0x00 0x45100000 0x00c24000>,
-			 <0x46000000 0x00 0x46000000 0x00200000>,
-			 <0x47000000 0x00 0x47000000 0x00068400>;
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
 
 		cbass_mcu: interconnect@28380000 {
 			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
-				 <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
-				 <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
-				 <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
-				 <0x46000000 0x46000000 0x00200000>, /* CPSW */
-				 <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
 
 			cbass_wakeup: interconnect@42040000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				/* WKUP  Basic peripherals */
-				ranges = <0x42040000 0x42040000 0x03ac2400>;
+				ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
 			};
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 015/191] samples/bpf: fix a compilation failure

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 534e0e52bc23de588e81b5a6f75e10c8c4b189fc ]

samples/bpf build failed with the following errors:

  $ make samples/bpf/
  ...
  HOSTCC  samples/bpf/sockex3_user.o
  /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:16:8: error: redefinition of ‘struct bpf_flow_keys’
   struct bpf_flow_keys {
          ^
  In file included from /data/users/yhs/work/net-next/samples/bpf/sockex3_user.c:4:0:
  ./usr/include/linux/bpf.h:2338:9: note: originally defined here
    struct bpf_flow_keys *flow_keys;
           ^
  make[3]: *** [samples/bpf/sockex3_user.o] Error 1

Commit d58e468b1112d ("flow_dissector: implements flow dissector BPF hook")
introduced struct bpf_flow_keys in include/uapi/linux/bpf.h and hence
caused the naming conflict with samples/bpf/sockex3_user.c.

The fix is to rename struct bpf_flow_keys in samples/bpf/sockex3_user.c
to flow_keys to avoid the conflict.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/sockex3_user.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/sockex3_user.c b/samples/bpf/sockex3_user.c
index 5ba3ae9d180ba..22f74d0e14934 100644
--- a/samples/bpf/sockex3_user.c
+++ b/samples/bpf/sockex3_user.c
@@ -13,7 +13,7 @@
 #define PARSE_IP_PROG_FD (prog_fd[0])
 #define PROG_ARRAY_FD (map_fd[0])
 
-struct bpf_flow_keys {
+struct flow_keys {
 	__be32 src;
 	__be32 dst;
 	union {
@@ -64,7 +64,7 @@ int main(int argc, char **argv)
 	(void) f;
 
 	for (i = 0; i < 5; i++) {
-		struct bpf_flow_keys key = {}, next_key;
+		struct flow_keys key = {}, next_key;
 		struct pair value;
 
 		sleep(1);
-- 
2.20.1

[PATCH AUTOSEL 4.19 016/191] spi/bcm63xx-hsspi: keep pll clk enabled

[Sasha Levin]

From: Jonas Gorski <jonas.gorski@gmail.com>

[ Upstream commit 0fd85869c2a9c8723a98bc1f56a876e8383649f4 ]

If the pll clock needs to be enabled to get its rate, it will also need
to be enabled to provide it. So ensure it is kept enabled through the
lifetime of the device.

Fixes: 0d7412ed1f5dc ("spi/bcm63xx-hspi: Enable the clock before calling clk_get_rate().")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-bcm63xx-hsspi.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index c23849f7aa7bc..9a06ffdb73b88 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -101,6 +101,7 @@ struct bcm63xx_hsspi {
 
 	struct platform_device *pdev;
 	struct clk *clk;
+	struct clk *pll_clk;
 	void __iomem *regs;
 	u8 __iomem *fifo;
 
@@ -332,7 +333,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 	struct resource *res_mem;
 	void __iomem *regs;
 	struct device *dev = &pdev->dev;
-	struct clk *clk;
+	struct clk *clk, *pll_clk = NULL;
 	int irq, ret;
 	u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS;
 
@@ -358,7 +359,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 
 	rate = clk_get_rate(clk);
 	if (!rate) {
-		struct clk *pll_clk = devm_clk_get(dev, "pll");
+		pll_clk = devm_clk_get(dev, "pll");
 
 		if (IS_ERR(pll_clk)) {
 			ret = PTR_ERR(pll_clk);
@@ -373,19 +374,20 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 		clk_disable_unprepare(pll_clk);
 		if (!rate) {
 			ret = -EINVAL;
-			goto out_disable_clk;
+			goto out_disable_pll_clk;
 		}
 	}
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
 	if (!master) {
 		ret = -ENOMEM;
-		goto out_disable_clk;
+		goto out_disable_pll_clk;
 	}
 
 	bs = spi_master_get_devdata(master);
 	bs->pdev = pdev;
 	bs->clk = clk;
+	bs->pll_clk = pll_clk;
 	bs->regs = regs;
 	bs->speed_hz = rate;
 	bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
@@ -440,6 +442,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
 
 out_put_master:
 	spi_master_put(master);
+out_disable_pll_clk:
+	clk_disable_unprepare(pll_clk);
 out_disable_clk:
 	clk_disable_unprepare(clk);
 	return ret;
@@ -453,6 +457,7 @@ static int bcm63xx_hsspi_remove(struct platform_device *pdev)
 
 	/* reset the hardware and block queue progress */
 	__raw_writel(0, bs->regs + HSSPI_INT_MASK_REG);
+	clk_disable_unprepare(bs->pll_clk);
 	clk_disable_unprepare(bs->clk);
 
 	return 0;
@@ -465,6 +470,7 @@ static int bcm63xx_hsspi_suspend(struct device *dev)
 	struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
 
 	spi_master_suspend(master);
+	clk_disable_unprepare(bs->pll_clk);
 	clk_disable_unprepare(bs->clk);
 
 	return 0;
@@ -480,6 +486,12 @@ static int bcm63xx_hsspi_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (bs->pll_clk) {
+		ret = clk_prepare_enable(bs->pll_clk);
+		if (ret)
+			return ret;
+	}
+
 	spi_master_resume(master);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 017/191] spi: mediatek: Don't modify spi_transfer when transfer.

[Sasha Levin]

From: Peter Shih <pihsun@chromium.org>

[ Upstream commit 00bca73bfca4fb0ab089b94cad0fc83d8b49c25f ]

Mediatek SPI driver modifies some fields (tx_buf, rx_buf, len, tx_dma,
rx_dma) of the spi_transfer* passed in when doing transfer_one and in
interrupt handler. This is somewhat unexpected, and there are some
caller (e.g. Cr50 spi driver) that reuse the spi_transfer for multiple
messages. Add a field to record how many bytes have been transferred,
and calculate the right len / buffer based on it instead.

Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>

Change-Id: I23e218cd964f16c0b2b26127d4a5ca6529867673
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mt65xx.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 86bf45667a040..3dc31627c6558 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -98,6 +98,7 @@ struct mtk_spi {
 	struct clk *parent_clk, *sel_clk, *spi_clk;
 	struct spi_transfer *cur_transfer;
 	u32 xfer_len;
+	u32 num_xfered;
 	struct scatterlist *tx_sgl, *rx_sgl;
 	u32 tx_sgl_len, rx_sgl_len;
 	const struct mtk_spi_compatible *dev_comp;
@@ -385,6 +386,7 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
 
 	mdata->cur_transfer = xfer;
 	mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, xfer->len);
+	mdata->num_xfered = 0;
 	mtk_spi_prepare_transfer(master, xfer);
 	mtk_spi_setup_packet(master);
 
@@ -415,6 +417,7 @@ static int mtk_spi_dma_transfer(struct spi_master *master,
 	mdata->tx_sgl_len = 0;
 	mdata->rx_sgl_len = 0;
 	mdata->cur_transfer = xfer;
+	mdata->num_xfered = 0;
 
 	mtk_spi_prepare_transfer(master, xfer);
 
@@ -482,7 +485,7 @@ static int mtk_spi_setup(struct spi_device *spi)
 
 static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 {
-	u32 cmd, reg_val, cnt, remainder;
+	u32 cmd, reg_val, cnt, remainder, len;
 	struct spi_master *master = dev_id;
 	struct mtk_spi *mdata = spi_master_get_devdata(master);
 	struct spi_transfer *trans = mdata->cur_transfer;
@@ -497,36 +500,38 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
 		if (trans->rx_buf) {
 			cnt = mdata->xfer_len / 4;
 			ioread32_rep(mdata->base + SPI_RX_DATA_REG,
-				     trans->rx_buf, cnt);
+				     trans->rx_buf + mdata->num_xfered, cnt);
 			remainder = mdata->xfer_len % 4;
 			if (remainder > 0) {
 				reg_val = readl(mdata->base + SPI_RX_DATA_REG);
-				memcpy(trans->rx_buf + (cnt * 4),
-					&reg_val, remainder);
+				memcpy(trans->rx_buf +
+					mdata->num_xfered +
+					(cnt * 4),
+					&reg_val,
+					remainder);
 			}
 		}
 
-		trans->len -= mdata->xfer_len;
-		if (!trans->len) {
+		mdata->num_xfered += mdata->xfer_len;
+		if (mdata->num_xfered == trans->len) {
 			spi_finalize_current_transfer(master);
 			return IRQ_HANDLED;
 		}
 
-		if (trans->tx_buf)
-			trans->tx_buf += mdata->xfer_len;
-		if (trans->rx_buf)
-			trans->rx_buf += mdata->xfer_len;
-
-		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, trans->len);
+		len = trans->len - mdata->num_xfered;
+		mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
 		mtk_spi_setup_packet(master);
 
-		cnt = trans->len / 4;
-		iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf, cnt);
+		cnt = len / 4;
+		iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
+				trans->tx_buf + mdata->num_xfered, cnt);
 
-		remainder = trans->len % 4;
+		remainder = len % 4;
 		if (remainder > 0) {
 			reg_val = 0;
-			memcpy(&reg_val, trans->tx_buf + (cnt * 4), remainder);
+			memcpy(&reg_val,
+				trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+				remainder);
 			writel(reg_val, mdata->base + SPI_TX_DATA_REG);
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 018/191] ASoC: rt5682: Fix the boost volume at the begining of playback

[Sasha Levin]

From: Shuming Fan <shumingf@realtek.com>

[ Upstream commit 28b20dde5e1c943ab899549a655ac4935cffccbb ]

This patch fixed the boost volume at the begining of playback
while DAC volume set to lower level.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5682.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 6f5dac09ceded..baa00f04288bd 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -68,6 +68,7 @@ struct rt5682_priv {
 
 static const struct reg_sequence patch_list[] = {
 	{0x01c1, 0x1000},
+	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
 };
 
 static const struct reg_default rt5682_reg[] = {
@@ -1449,6 +1450,8 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
 			RT5682_NG2_EN_MASK, RT5682_NG2_EN);
 		snd_soc_component_update_bits(component,
 			RT5682_DEPOP_1, 0x60, 0x60);
+		snd_soc_component_update_bits(component,
+			RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0080);
 		break;
 
 	case SND_SOC_DAPM_POST_PMD:
@@ -1456,6 +1459,8 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
 			RT5682_DEPOP_1, 0x60, 0x0);
 		snd_soc_component_write(component,
 			RT5682_HP_CTRL_2, 0x0000);
+		snd_soc_component_update_bits(component,
+			RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0000);
 		break;
 
 	default:
-- 
2.20.1

[PATCH AUTOSEL 4.19 019/191] ipmi_si_pci: fix NULL device in ipmi_si error message

[Sasha Levin]

From: Meelis Roos <mroos@linux.ee>

[ Upstream commit 01508d9ebf4fc863f2fc4561c390bf4b7c3301a6 ]

I noticed that 4.17.0 logs the follwing during ipmi_si setup:

 ipmi_si 0000:01:04.6: probing via PCI
 (NULL device *): Could not setup I/O space
 ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21

Fix the "NULL device *) by moving io.dev assignment before its potential
use by ipmi_pci_probe_regspacing().

Result:
 ipmi_si 0000:01:04.6: probing via PCI
 ipmi_si 0000:01:04.6: Could not setup I/O space
 ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21

Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_si_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
index f54ca6869ed2c..022e03634ce2a 100644
--- a/drivers/char/ipmi/ipmi_si_pci.c
+++ b/drivers/char/ipmi/ipmi_si_pci.c
@@ -120,6 +120,8 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
 	}
 	io.addr_data = pci_resource_start(pdev, 0);
 
+	io.dev = &pdev->dev;
+
 	io.regspacing = ipmi_pci_probe_regspacing(&io);
 	io.regsize = DEFAULT_REGSIZE;
 	io.regshift = 0;
@@ -128,8 +130,6 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
 	if (io.irq)
 		io.irq_setup = ipmi_std_irq_setup;
 
-	io.dev = &pdev->dev;
-
 	dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n",
 		&pdev->resource[0], io.regsize, io.regspacing, io.irq);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 020/191] ipmi_si: fix potential integer overflow on large shift

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 97a103e6b584442cd848887ed8d47be2410b7e09 ]

Shifting unsigned char b by an int type can lead to sign-extension
overflow. For example, if b is 0xff and the shift is 24, then top
bit is sign-extended so the final value passed to writeq has all
the upper 32 bits set.  Fix this by casting b to a 64 bit unsigned
before the shift.

Detected by CoverityScan, CID#1465246 ("Unintended sign extension")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_si_mem_io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/ipmi_si_mem_io.c b/drivers/char/ipmi/ipmi_si_mem_io.c
index 638f4ab88f445..75583612ab105 100644
--- a/drivers/char/ipmi/ipmi_si_mem_io.c
+++ b/drivers/char/ipmi/ipmi_si_mem_io.c
@@ -51,7 +51,7 @@ static unsigned char mem_inq(const struct si_sm_io *io, unsigned int offset)
 static void mem_outq(const struct si_sm_io *io, unsigned int offset,
 		     unsigned char b)
 {
-	writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
+	writeq((u64)b << io->regshift, (io->addr)+(offset * io->regspacing));
 }
 #endif
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 021/191] ipmi:dmi: Ignore IPMI SMBIOS entries with a zero base address

[Sasha Levin]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 1574608f5f4204440d6d9f52b971aba967664764 ]

Looking at logs from systems all over the place, it looks like tons
of broken systems exist that set the base address to zero.  I can
only guess that is some sort of non-standard idea to mark the
interface as not being present.  It can't be zero, anyway, so just
complain and ignore it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_dmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c
index e2c143861b1e5..28dbd5529188a 100644
--- a/drivers/char/ipmi/ipmi_dmi.c
+++ b/drivers/char/ipmi/ipmi_dmi.c
@@ -217,6 +217,10 @@ static void __init dmi_decode_ipmi(const struct dmi_header *dm)
 	slave_addr = data[DMI_IPMI_SLAVEADDR];
 
 	memcpy(&base_addr, data + DMI_IPMI_ADDR, sizeof(unsigned long));
+	if (!base_addr) {
+		pr_err("Base address is zero, assuming no IPMI interface\n");
+		return;
+	}
 	if (len >= DMI_IPMI_VER2_LENGTH) {
 		if (type == IPMI_DMI_TYPE_SSIF) {
 			offset = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 022/191] ipmi: fix return value of ipmi_set_my_LUN

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 060e8fb53fe3455568982d10ab8c3dd605565049 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN':
drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning:
 variable 'rv' set but not used [-Wunused-but-set-variable]
  int index, rv = 0;

'rv' should be the correct return value.

Fixes: 048f7c3e352e ("ipmi: Properly release srcu locks on error conditions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_msghandler.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 3fb297b5fb176..84c17f936c09c 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -1365,7 +1365,7 @@ int ipmi_set_my_LUN(struct ipmi_user *user,
 	}
 	release_ipmi_user(user, index);
 
-	return 0;
+	return rv;
 }
 EXPORT_SYMBOL(ipmi_set_my_LUN);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 023/191] net: hns3: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit c9c3941186c5637caed131c4f4064411d6882299 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, also the implementation in this
driver has returns 'netdev_tx_t' value, so just change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hip04_eth.c    | 3 ++-
 drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index a91d49dd92ea6..eaa0c579d49f5 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -423,7 +423,8 @@ static void hip04_start_tx_timer(struct hip04_priv *priv)
 			       ns, HRTIMER_MODE_REL);
 }
 
-static int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct hip04_priv *priv = netdev_priv(ndev);
 	struct net_device_stats *stats = &ndev->stats;
diff --git a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
index c5727003af8c1..471805ea363b6 100644
--- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
+++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c
@@ -736,7 +736,7 @@ static int hix5hd2_fill_sg_desc(struct hix5hd2_priv *priv,
 	return 0;
 }
 
-static int hix5hd2_net_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t hix5hd2_net_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct hix5hd2_priv *priv = netdev_priv(dev);
 	struct hix5hd2_desc *desc;
-- 
2.20.1

[PATCH AUTOSEL 4.19 024/191] net: cavium: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit ac1172dea10b6ba51de9346d3130db688b5196c5 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/lio_main.c    | 2 +-
 drivers/net/ethernet/cavium/liquidio/lio_vf_main.c | 2 +-
 drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c  | 5 +++--
 drivers/net/ethernet/cavium/octeon/octeon_mgmt.c   | 5 +++--
 4 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index 6fb13fa73b271..304e4b9436276 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -2324,7 +2324,7 @@ static inline int send_nic_timestamp_pkt(struct octeon_device *oct,
  * @returns whether the packet was transmitted to the device okay or not
  *             (NETDEV_TX_OK or NETDEV_TX_BUSY)
  */
-static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct lio *lio;
 	struct octnet_buf_free_info *finfo;
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
index b77835724dc84..d83773bc0dd7f 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
@@ -1390,7 +1390,7 @@ static int send_nic_timestamp_pkt(struct octeon_device *oct,
  * @returns whether the packet was transmitted to the device okay or not
  *             (NETDEV_TX_OK or NETDEV_TX_BUSY)
  */
-static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct octnet_buf_free_info *finfo;
 	union octnic_cmd_setup cmdsetup;
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c
index c99b59fe4c8fb..a1bda1683ebfc 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c
@@ -31,7 +31,8 @@
 
 static int lio_vf_rep_open(struct net_device *ndev);
 static int lio_vf_rep_stop(struct net_device *ndev);
-static int lio_vf_rep_pkt_xmit(struct sk_buff *skb, struct net_device *ndev);
+static netdev_tx_t lio_vf_rep_pkt_xmit(struct sk_buff *skb,
+				       struct net_device *ndev);
 static void lio_vf_rep_tx_timeout(struct net_device *netdev);
 static int lio_vf_rep_phys_port_name(struct net_device *dev,
 				     char *buf, size_t len);
@@ -382,7 +383,7 @@ lio_vf_rep_packet_sent_callback(struct octeon_device *oct,
 		netif_wake_queue(ndev);
 }
 
-static int
+static netdev_tx_t
 lio_vf_rep_pkt_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct lio_vf_rep_desc *vf_rep = netdev_priv(ndev);
diff --git a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
index bb43ddb7539e7..4b3aecf98f2af 100644
--- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c
@@ -1268,12 +1268,13 @@ static int octeon_mgmt_stop(struct net_device *netdev)
 	return 0;
 }
 
-static int octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t
+octeon_mgmt_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct octeon_mgmt *p = netdev_priv(netdev);
 	union mgmt_port_ring_entry re;
 	unsigned long flags;
-	int rv = NETDEV_TX_BUSY;
+	netdev_tx_t rv = NETDEV_TX_BUSY;
 
 	re.d64 = 0;
 	re.s.tstamp = ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) != 0);
-- 
2.20.1

[PATCH AUTOSEL 4.19 025/191] net: ibm: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 94b2bb28dbb43fcb943d5275ab19fd5a4972bedb ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 +-
 drivers/net/ethernet/ibm/emac/core.c      | 7 ++++---
 drivers/net/ethernet/ibm/ibmvnic.c        | 4 ++--
 3 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 506f78322d741..e8ee69d4e4d34 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -2027,7 +2027,7 @@ static void ehea_xmit3(struct sk_buff *skb, struct net_device *dev,
 	dev_consume_skb_any(skb);
 }
 
-static int ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ehea_port *port = netdev_priv(dev);
 	struct ehea_swqe *swqe;
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 129f4e9f38dac..a96f501813ff7 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -1409,7 +1409,7 @@ static inline u16 emac_tx_csum(struct emac_instance *dev,
 	return 0;
 }
 
-static inline int emac_xmit_finish(struct emac_instance *dev, int len)
+static inline netdev_tx_t emac_xmit_finish(struct emac_instance *dev, int len)
 {
 	struct emac_regs __iomem *p = dev->emacp;
 	struct net_device *ndev = dev->ndev;
@@ -1436,7 +1436,7 @@ static inline int emac_xmit_finish(struct emac_instance *dev, int len)
 }
 
 /* Tx lock BH */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct emac_instance *dev = netdev_priv(ndev);
 	unsigned int len = skb->len;
@@ -1494,7 +1494,8 @@ static inline int emac_xmit_split(struct emac_instance *dev, int slot,
 }
 
 /* Tx lock BH disabled (SG version for TAH equipped EMACs) */
-static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct emac_instance *dev = netdev_priv(ndev);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 8fa14736449bc..8a1916443235a 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1420,7 +1420,7 @@ static int ibmvnic_xmit_workarounds(struct sk_buff *skb,
 	return 0;
 }
 
-static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 	int queue_num = skb_get_queue_mapping(skb);
@@ -1444,7 +1444,7 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
 	u64 *handle_array;
 	int index = 0;
 	u8 proto = 0;
-	int ret = 0;
+	netdev_tx_t ret = NETDEV_TX_OK;
 
 	if (adapter->resetting) {
 		if (!netif_subqueue_stopped(netdev, skb))
-- 
2.20.1

[PATCH AUTOSEL 4.19 026/191] powerpc/iommu: Avoid derefence before pointer check

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 984ecdd68de0fa1f63ce205d6c19ef5a7bc67b40 ]

The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
if it is not NULL.

Just moving the dereference code to after the check, where there will
be guarantee that 'tbl' will not be NULL.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 19b4c628f3bec..f0dc680e659af 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -785,9 +785,9 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
 
 	vaddr = page_address(page) + offset;
 	uaddr = (unsigned long)vaddr;
-	npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
 
 	if (tbl) {
+		npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
 		align = 0;
 		if (tbl->it_page_shift < PAGE_SHIFT && size >= PAGE_SIZE &&
 		    ((unsigned long)vaddr & ~PAGE_MASK) == 0)
-- 
2.20.1

[PATCH AUTOSEL 4.19 027/191] selftests/powerpc: Do not fail with reschedule

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 44d947eff19d64384efc06069509db7a0a1103b0 ]

There are cases where the test is not expecting to have the transaction
aborted, but, the test process might have been rescheduled, either in the
OS level or by KVM (if it is running on a KVM guest machine). The process
reschedule will cause a treclaim/recheckpoint which will cause the
transaction to doom, aborting the transaction as soon as the process is
rescheduled back to the CPU. This might cause the test to fail, but this is
not a failure in essence.

If that is the case, TEXASR[FC] is indicated with either
TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.

In this scenario, ignore these two failures and avoid the whole test to
return failure.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/powerpc/tm/tm-unavailable.c | 9 ++++++---
 tools/testing/selftests/powerpc/tm/tm.h             | 9 +++++++++
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/powerpc/tm/tm-unavailable.c b/tools/testing/selftests/powerpc/tm/tm-unavailable.c
index 156c8e750259b..09894f4ff62e6 100644
--- a/tools/testing/selftests/powerpc/tm/tm-unavailable.c
+++ b/tools/testing/selftests/powerpc/tm/tm-unavailable.c
@@ -236,7 +236,8 @@ void *tm_una_ping(void *input)
 	}
 
 	/* Check if we were not expecting a failure and a it occurred. */
-	if (!expecting_failure() && is_failure(cr_)) {
+	if (!expecting_failure() && is_failure(cr_) &&
+	    !failure_is_reschedule()) {
 		printf("\n\tUnexpected transaction failure 0x%02lx\n\t",
 			failure_code());
 		return (void *) -1;
@@ -244,9 +245,11 @@ void *tm_una_ping(void *input)
 
 	/*
 	 * Check if TM failed due to the cause we were expecting. 0xda is a
-	 * TM_CAUSE_FAC_UNAV cause, otherwise it's an unexpected cause.
+	 * TM_CAUSE_FAC_UNAV cause, otherwise it's an unexpected cause, unless
+	 * it was caused by a reschedule.
 	 */
-	if (is_failure(cr_) && !failure_is_unavailable()) {
+	if (is_failure(cr_) && !failure_is_unavailable() &&
+	    !failure_is_reschedule()) {
 		printf("\n\tUnexpected failure cause 0x%02lx\n\t",
 			failure_code());
 		return (void *) -1;
diff --git a/tools/testing/selftests/powerpc/tm/tm.h b/tools/testing/selftests/powerpc/tm/tm.h
index df4204247d45c..5518b1d4ef8b2 100644
--- a/tools/testing/selftests/powerpc/tm/tm.h
+++ b/tools/testing/selftests/powerpc/tm/tm.h
@@ -52,6 +52,15 @@ static inline bool failure_is_unavailable(void)
 	return (failure_code() & TM_CAUSE_FAC_UNAV) == TM_CAUSE_FAC_UNAV;
 }
 
+static inline bool failure_is_reschedule(void)
+{
+	if ((failure_code() & TM_CAUSE_RESCHED) == TM_CAUSE_RESCHED ||
+	    (failure_code() & TM_CAUSE_KVM_RESCHED) == TM_CAUSE_KVM_RESCHED)
+		return true;
+
+	return false;
+}
+
 static inline bool failure_is_nesting(void)
 {
 	return (__builtin_get_texasru() & 0x400000);
-- 
2.20.1

[PATCH AUTOSEL 4.19 028/191] powerpc/64s/hash: Fix stab_rr off by one initialization

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 09b4438db13fa83b6219aee5993711a2aa2a0c64 ]

This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/slb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 9f574e59d1786..2f162c6e52d4f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -355,7 +355,7 @@ void slb_initialize(void)
 #endif
 	}
 
-	get_paca()->stab_rr = SLB_NUM_BOLTED;
+	get_paca()->stab_rr = SLB_NUM_BOLTED - 1;
 
 	lflags = SLB_VSID_KERNEL | linear_llp;
 	vflags = SLB_VSID_KERNEL | vmalloc_llp;
-- 
2.20.1

[PATCH AUTOSEL 4.19 029/191] powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request

[Sasha Levin]

From: Nathan Fontenot <nfont@linux.vnet.ibm.com>

[ Upstream commit 063b8b1251fd069f3740339fca56119d218f11ba ]

The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.

Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.

This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/drmem.h              |  5 ++
 .../platforms/pseries/hotplug-memory.c        | 55 ++++++-------------
 2 files changed, 21 insertions(+), 39 deletions(-)

diff --git a/arch/powerpc/include/asm/drmem.h b/arch/powerpc/include/asm/drmem.h
index ce242b9ea8c67..7c1d8e74b25d4 100644
--- a/arch/powerpc/include/asm/drmem.h
+++ b/arch/powerpc/include/asm/drmem.h
@@ -99,4 +99,9 @@ void __init walk_drmem_lmbs_early(unsigned long node,
 			void (*func)(struct drmem_lmb *, const __be32 **));
 #endif
 
+static inline void invalidate_lmb_associativity_index(struct drmem_lmb *lmb)
+{
+	lmb->aa_index = 0xffffffff;
+}
+
 #endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index f99cd31b6fd1a..2f166136bb50a 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -163,7 +163,7 @@ static u32 find_aa_index(struct device_node *dr_node,
 	return aa_index;
 }
 
-static u32 lookup_lmb_associativity_index(struct drmem_lmb *lmb)
+static int update_lmb_associativity_index(struct drmem_lmb *lmb)
 {
 	struct device_node *parent, *lmb_node, *dr_node;
 	struct property *ala_prop;
@@ -203,43 +203,14 @@ static u32 lookup_lmb_associativity_index(struct drmem_lmb *lmb)
 	aa_index = find_aa_index(dr_node, ala_prop, lmb_assoc);
 
 	dlpar_free_cc_nodes(lmb_node);
-	return aa_index;
-}
-
-static int dlpar_add_device_tree_lmb(struct drmem_lmb *lmb)
-{
-	int rc, aa_index;
-
-	lmb->flags |= DRCONF_MEM_ASSIGNED;
 
-	aa_index = lookup_lmb_associativity_index(lmb);
 	if (aa_index < 0) {
-		pr_err("Couldn't find associativity index for drc index %x\n",
-		       lmb->drc_index);
-		return aa_index;
+		pr_err("Could not find LMB associativity\n");
+		return -1;
 	}
 
 	lmb->aa_index = aa_index;
-
-	rtas_hp_event = true;
-	rc = drmem_update_dt();
-	rtas_hp_event = false;
-
-	return rc;
-}
-
-static int dlpar_remove_device_tree_lmb(struct drmem_lmb *lmb)
-{
-	int rc;
-
-	lmb->flags &= ~DRCONF_MEM_ASSIGNED;
-	lmb->aa_index = 0xffffffff;
-
-	rtas_hp_event = true;
-	rc = drmem_update_dt();
-	rtas_hp_event = false;
-
-	return rc;
+	return 0;
 }
 
 static struct memory_block *lmb_to_memblock(struct drmem_lmb *lmb)
@@ -431,7 +402,9 @@ static int dlpar_remove_lmb(struct drmem_lmb *lmb)
 	/* Update memory regions for memory remove */
 	memblock_remove(lmb->base_addr, block_sz);
 
-	dlpar_remove_device_tree_lmb(lmb);
+	invalidate_lmb_associativity_index(lmb);
+	lmb->flags &= ~DRCONF_MEM_ASSIGNED;
+
 	return 0;
 }
 
@@ -691,10 +664,8 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	if (lmb->flags & DRCONF_MEM_ASSIGNED)
 		return -EINVAL;
 
-	rc = dlpar_add_device_tree_lmb(lmb);
+	rc = update_lmb_associativity_index(lmb);
 	if (rc) {
-		pr_err("Couldn't update device tree for drc index %x\n",
-		       lmb->drc_index);
 		dlpar_release_drc(lmb->drc_index);
 		return rc;
 	}
@@ -707,14 +678,14 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	/* Add the memory */
 	rc = add_memory(nid, lmb->base_addr, block_sz);
 	if (rc) {
-		dlpar_remove_device_tree_lmb(lmb);
+		invalidate_lmb_associativity_index(lmb);
 		return rc;
 	}
 
 	rc = dlpar_online_lmb(lmb);
 	if (rc) {
 		remove_memory(nid, lmb->base_addr, block_sz);
-		dlpar_remove_device_tree_lmb(lmb);
+		invalidate_lmb_associativity_index(lmb);
 	} else {
 		lmb->flags |= DRCONF_MEM_ASSIGNED;
 	}
@@ -961,6 +932,12 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
 		break;
 	}
 
+	if (!rc) {
+		rtas_hp_event = true;
+		rc = drmem_update_dt();
+		rtas_hp_event = false;
+	}
+
 	unlock_device_hotplug();
 	return rc;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 030/191] powerpc/pseries: Disable CPU hotplug across migrations

[Sasha Levin]

From: Nathan Fontenot <nfont@linux.vnet.ibm.com>

[ Upstream commit 85a88cabad57d26d826dd94ea34d3a785824d802 ]

When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.

During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.

To prevent this this patch disables CPU hotplug during the migration
process.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 9e41a9de43235..95d1264ba7952 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -985,6 +985,7 @@ int rtas_ibm_suspend_me(u64 handle)
 		goto out;
 	}
 
+	cpu_hotplug_disable();
 	stop_topology_update();
 
 	/* Call function on all CPUs.  One of us will make the
@@ -999,6 +1000,7 @@ int rtas_ibm_suspend_me(u64 handle)
 		printk(KERN_ERR "Error doing global join\n");
 
 	start_topology_update();
+	cpu_hotplug_enable();
 
 	/* Take down CPUs not online prior to suspend */
 	cpuret = rtas_offline_cpus_mask(offline_mask);
-- 
2.20.1

[PATCH AUTOSEL 4.19 031/191] powerpc: Fix duplicate const clang warning in user access code

[Sasha Levin]

From: Anton Blanchard <anton@samba.org>

[ Upstream commit e00d93ac9a189673028ac125a74b9bc8ae73eebc ]

This re-applies commit b91c1e3e7a6f ("powerpc: Fix duplicate const
clang warning in user access code") (Jun 2015) which was undone in
commits:
  f2ca80905929 ("powerpc/sparse: Constify the address pointer in __get_user_nosleep()") (Feb 2017)
  d466f6c5cac1 ("powerpc/sparse: Constify the address pointer in __get_user_nocheck()") (Feb 2017)
  f84ed59a612d ("powerpc/sparse: Constify the address pointer in __get_user_check()") (Feb 2017)

We see a large number of duplicate const errors in the user access
code when building with llvm/clang:

  include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
        ret = __get_user(c, uaddr);

The problem is we are doing const __typeof__(*(ptr)), which will hit
the warning if ptr is marked const.

Removing const does not seem to have any effect on GCC code
generation.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/uaccess.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 1ca9e37f7cc99..38a25ff8afb76 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -260,7 +260,7 @@ do {								\
 ({								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
 	__chk_user_ptr(ptr);					\
 	if (!is_kernel_addr((unsigned long)__gu_addr))		\
 		might_fault();					\
@@ -274,7 +274,7 @@ do {								\
 ({									\
 	long __gu_err = -EFAULT;					\
 	__long_type(*(ptr)) __gu_val = 0;				\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	__typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
 	might_fault();							\
 	if (access_ok(VERIFY_READ, __gu_addr, (size))) {		\
 		barrier_nospec();					\
@@ -288,7 +288,7 @@ do {								\
 ({								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
 	__chk_user_ptr(ptr);					\
 	barrier_nospec();					\
 	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-- 
2.20.1

[PATCH AUTOSEL 4.19 032/191] RDMA/i40iw: Fix incorrect iterator type

[Sasha Levin]

From: Håkon Bugge <Haakon.Bugge@oracle.com>

[ Upstream commit 802fa45cd320de319e86c93bca72abec028ba059 ]

Commit f27b4746f378 ("i40iw: add connection management code") uses an
incorrect rcu iterator, whilst holding the rtnl_lock. Since the
critical region invokes i40iw_manage_qhash(), which is a sleeping
function, the rcu locking and traversal cannot be used.

Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/i40iw/i40iw_cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c
index 423818a7d3330..771eb6bd07854 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -1689,7 +1689,7 @@ static enum i40iw_status_code i40iw_add_mqh_6(struct i40iw_device *iwdev,
 	unsigned long flags;
 
 	rtnl_lock();
-	for_each_netdev_rcu(&init_net, ip_dev) {
+	for_each_netdev(&init_net, ip_dev) {
 		if ((((rdma_vlan_dev_vlan_id(ip_dev) < I40IW_NO_VLAN) &&
 		      (rdma_vlan_dev_real_dev(ip_dev) == iwdev->netdev)) ||
 		     (ip_dev == iwdev->netdev)) && (ip_dev->flags & IFF_UP)) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 033/191] ARM: dts: atmel: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit c890ecdbe93d482512a911b299bfb009780a29c2 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/eeprom@87: I2C bus unit address format error, expected "57"
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/ft5426@56: I2C bus unit address format error, expected "38"
arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2"

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91-dvk_su60_somc.dtsi     | 4 ++--
 arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 4 ++--
 arch/arm/boot/dts/at91-vinco.dts              | 2 +-
 arch/arm/boot/dts/at91sam9260ek.dts           | 2 +-
 arch/arm/boot/dts/at91sam9261ek.dts           | 2 +-
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi   | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index bb86f17ed5ed1..21876da7c4425 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -70,9 +70,9 @@
 &i2c1 {
 	status = "okay";
 
-	eeprom@87 {
+	eeprom@57 {
 		compatible = "giantec,gt24c32a", "atmel,24c32";
-		reg = <87>;
+		reg = <0x57>;
 		pagesize = <32>;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index 4b9176dc5d029..df0f0cc575c18 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -59,9 +59,9 @@
 &i2c1 {
 	status = "okay";
 
-	ft5426@56 {
+	ft5426@38 {
 		compatible = "focaltech,ft5426", "edt,edt-ft5406";
-		reg = <56>;
+		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
 
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 1be9889a2b3a1..430277291e025 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -128,7 +128,7 @@
 			i2c2: i2c@f8024000 {
 				status = "okay";
 
-				rtc1: rtc@64 {
+				rtc1: rtc@32 {
 					compatible = "epson,rx8900";
 					reg = <0x32>;
 				};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index d2b865f602932..07d1b571e6017 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -127,7 +127,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index a29fc04940762..a57f2d435dcae 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -160,7 +160,7 @@
 					spi-max-frequency = <15000000>;
 				};
 
-				tsc2046@0 {
+				tsc2046@2 {
 					reg = <2>;
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 71df3adfc7ca1..ec1f17ab6753b 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -109,7 +109,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 034/191] OPP: Protect dev_list with opp_table lock

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 3d2556992a878a2210d3be498416aee39e0c32aa ]

The dev_list needs to be protected with a lock, else we may have
simultaneous access (addition/removal) to it and that would be racy.
Extend scope of the opp_table lock to protect dev_list as well.

Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/opp/core.c | 21 +++++++++++++++++++--
 drivers/opp/cpu.c  |  2 ++
 drivers/opp/opp.h  |  2 +-
 3 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index f3433bf47b100..14d4ef5943741 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -48,9 +48,14 @@ static struct opp_device *_find_opp_dev(const struct device *dev,
 static struct opp_table *_find_opp_table_unlocked(struct device *dev)
 {
 	struct opp_table *opp_table;
+	bool found;
 
 	list_for_each_entry(opp_table, &opp_tables, node) {
-		if (_find_opp_dev(dev, opp_table)) {
+		mutex_lock(&opp_table->lock);
+		found = !!_find_opp_dev(dev, opp_table);
+		mutex_unlock(&opp_table->lock);
+
+		if (found) {
 			_get_opp_table_kref(opp_table);
 
 			return opp_table;
@@ -766,6 +771,8 @@ struct opp_device *_add_opp_dev(const struct device *dev,
 
 	/* Initialize opp-dev */
 	opp_dev->dev = dev;
+
+	mutex_lock(&opp_table->lock);
 	list_add(&opp_dev->node, &opp_table->dev_list);
 
 	/* Create debugfs entries for the opp_table */
@@ -773,6 +780,7 @@ struct opp_device *_add_opp_dev(const struct device *dev,
 	if (ret)
 		dev_err(dev, "%s: Failed to register opp debugfs (%d)\n",
 			__func__, ret);
+	mutex_unlock(&opp_table->lock);
 
 	return opp_dev;
 }
@@ -791,6 +799,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev)
 	if (!opp_table)
 		return NULL;
 
+	mutex_init(&opp_table->lock);
 	INIT_LIST_HEAD(&opp_table->dev_list);
 
 	opp_dev = _add_opp_dev(dev, opp_table);
@@ -812,7 +821,6 @@ static struct opp_table *_allocate_opp_table(struct device *dev)
 
 	BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
 	INIT_LIST_HEAD(&opp_table->opp_list);
-	mutex_init(&opp_table->lock);
 	kref_init(&opp_table->kref);
 
 	/* Secure the device table modification */
@@ -854,6 +862,10 @@ static void _opp_table_kref_release(struct kref *kref)
 	if (!IS_ERR(opp_table->clk))
 		clk_put(opp_table->clk);
 
+	/*
+	 * No need to take opp_table->lock here as we are guaranteed that no
+	 * references to the OPP table are taken at this point.
+	 */
 	opp_dev = list_first_entry(&opp_table->dev_list, struct opp_device,
 				   node);
 
@@ -1719,6 +1731,9 @@ void _dev_pm_opp_remove_table(struct opp_table *opp_table, struct device *dev,
 {
 	struct dev_pm_opp *opp, *tmp;
 
+	/* Protect dev_list */
+	mutex_lock(&opp_table->lock);
+
 	/* Find if opp_table manages a single device */
 	if (list_is_singular(&opp_table->dev_list)) {
 		/* Free static OPPs */
@@ -1736,6 +1751,8 @@ void _dev_pm_opp_remove_table(struct opp_table *opp_table, struct device *dev,
 	} else {
 		_remove_opp_dev(_find_opp_dev(dev, opp_table), opp_table);
 	}
+
+	mutex_unlock(&opp_table->lock);
 }
 
 void _dev_pm_opp_find_and_remove_table(struct device *dev, bool remove_all)
diff --git a/drivers/opp/cpu.c b/drivers/opp/cpu.c
index 0c09107094350..2868a022a0407 100644
--- a/drivers/opp/cpu.c
+++ b/drivers/opp/cpu.c
@@ -222,8 +222,10 @@ int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
 	cpumask_clear(cpumask);
 
 	if (opp_table->shared_opp == OPP_TABLE_ACCESS_SHARED) {
+		mutex_lock(&opp_table->lock);
 		list_for_each_entry(opp_dev, &opp_table->dev_list, node)
 			cpumask_set_cpu(opp_dev->dev->id, cpumask);
+		mutex_unlock(&opp_table->lock);
 	} else {
 		cpumask_set_cpu(cpu_dev->id, cpumask);
 	}
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index 7c540fd063b2d..e0866b1c1f1b2 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -126,7 +126,7 @@ enum opp_table_access {
  * @dev_list:	list of devices that share these OPPs
  * @opp_list:	table of opps
  * @kref:	for reference count of the table.
- * @lock:	mutex protecting the opp_list.
+ * @lock:	mutex protecting the opp_list and dev_list.
  * @np:		struct device_node pointer for opp's DT node.
  * @clock_latency_ns_max: Max clock latency in nanoseconds.
  * @shared_opp: OPP is shared between multiple devices.
-- 
2.20.1

[PATCH AUTOSEL 4.19 035/191] of/unittest: Fix I2C bus unit-address error

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 62287dce5d0ee207b6a09a0a1abd06b61cee1094 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses in
the unittests.

drivers/of/unittest-data/testcases.dtb: Warning (i2c_bus_reg): /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest14/i2c@0/test-mux-dev: I2C bus unit address format error, expected "20"
drivers/of/unittest-data/overlay_15.dtb: Warning (i2c_bus_reg): /fragment@0/__overlay__/test-unittest15/i2c@0/test-mux-dev: I2C bus unit address format error, expected "20"

Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/unittest-data/overlay_15.dts     | 4 ++--
 drivers/of/unittest-data/tests-overlay.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/of/unittest-data/overlay_15.dts b/drivers/of/unittest-data/overlay_15.dts
index b98f2514df4b3..5728490474f6b 100644
--- a/drivers/of/unittest-data/overlay_15.dts
+++ b/drivers/of/unittest-data/overlay_15.dts
@@ -20,8 +20,8 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			test-mux-dev {
-				reg = <32>;
+			test-mux-dev@20 {
+				reg = <0x20>;
 				compatible = "unittest-i2c-dev";
 				status = "okay";
 			};
diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi
index 25cf397b8f6b6..4ea024d908ee2 100644
--- a/drivers/of/unittest-data/tests-overlay.dtsi
+++ b/drivers/of/unittest-data/tests-overlay.dtsi
@@ -103,8 +103,8 @@
 							#size-cells = <0>;
 							reg = <0>;
 
-							test-mux-dev {
-								reg = <32>;
+							test-mux-dev@20 {
+								reg = <0x20>;
 								compatible = "unittest-i2c-dev";
 								status = "okay";
 							};
-- 
2.20.1

[PATCH AUTOSEL 4.19 036/191] libfdt: Ensure INT_MAX is defined in libfdt_env.h

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ]

The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.

Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/compressed/libfdt_env.h | 2 ++
 arch/powerpc/boot/libfdt_env.h        | 2 ++
 include/linux/libfdt_env.h            | 1 +
 3 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index 07437816e0986..b36c0289a308e 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -6,6 +6,8 @@
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
+#define INT_MAX			((int)(~0U>>1))
+
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
 typedef __be64 fdt64_t;
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index 2a0c8b1bf1479..2abc8e83b95e9 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -5,6 +5,8 @@
 #include <types.h>
 #include <string.h>
 
+#define INT_MAX			((int)(~0U>>1))
+
 #include "of.h"
 
 typedef unsigned long uintptr_t;
diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h
index c6ac1fe7ec68a..edb0f0c309044 100644
--- a/include/linux/libfdt_env.h
+++ b/include/linux/libfdt_env.h
@@ -2,6 +2,7 @@
 #ifndef LIBFDT_ENV_H
 #define LIBFDT_ENV_H
 
+#include <linux/kernel.h>	/* For INT_MAX */
 #include <linux/string.h>
 
 #include <asm/byteorder.h>
-- 
2.20.1

[PATCH AUTOSEL 4.19 037/191] power: supply: twl4030_charger: fix charging current out-of-bounds

[Sasha Levin]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 8314c212f995bc0d06b54ad02ef0ab4089781540 ]

the charging current uses unsigned int variables, if we step back
if the current is still low, we would run into negative which
means setting the target to a huge value.
Better add checks here.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/twl4030_charger.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index b6a7d9f74cf30..adcaa0a10a6f4 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -420,7 +420,8 @@ static void twl4030_current_worker(struct work_struct *data)
 
 	if (v < USB_MIN_VOLT) {
 		/* Back up and stop adjusting. */
-		bci->usb_cur -= USB_CUR_STEP;
+		if (bci->usb_cur >= USB_CUR_STEP)
+			bci->usb_cur -= USB_CUR_STEP;
 		bci->usb_cur_target = bci->usb_cur;
 	} else if (bci->usb_cur >= bci->usb_cur_target ||
 		   bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 038/191] power: supply: twl4030_charger: disable eoc interrupt on linear charge

[Sasha Levin]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 079cdff3d0a09c5da10ae1be35def7a116776328 ]

This avoids getting woken up from suspend after power interruptions
when the bci wrongly thinks the battery is full just because
of input current going low because of low input power

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/twl4030_charger.c | 27 +++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index adcaa0a10a6f4..0e202d4273fb6 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -440,6 +440,7 @@ static void twl4030_current_worker(struct work_struct *data)
 static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 {
 	int ret;
+	u32 reg;
 
 	if (bci->usb_mode == CHARGE_OFF)
 		enable = false;
@@ -453,14 +454,38 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 			bci->usb_enabled = 1;
 		}
 
-		if (bci->usb_mode == CHARGE_AUTO)
+		if (bci->usb_mode == CHARGE_AUTO) {
+			/* Enable interrupts now. */
+			reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC |
+					TWL4030_TBATOR2 | TWL4030_TBATOR1 |
+					TWL4030_BATSTS);
+			ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+				       TWL4030_INTERRUPTS_BCIIMR1A);
+			if (ret < 0) {
+				dev_err(bci->dev,
+					"failed to unmask interrupts: %d\n",
+					ret);
+				return ret;
+			}
 			/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
 			ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
+		}
 
 		/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
 		ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
 			TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
 		if (bci->usb_mode == CHARGE_LINEAR) {
+			/* Enable interrupts now. */
+			reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 |
+					TWL4030_TBATOR1 | TWL4030_BATSTS);
+			ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+				       TWL4030_INTERRUPTS_BCIIMR1A);
+			if (ret < 0) {
+				dev_err(bci->dev,
+					"failed to unmask interrupts: %d\n",
+					ret);
+				return ret;
+			}
 			twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
 			/* Watch dog key: WOVF acknowledge */
 			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
-- 
2.20.1

[PATCH AUTOSEL 4.19 039/191] net: mvpp2: fix the number of queues per cpu for PPv2.2

[Sasha Levin]

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 70afb58e9856a70ff9e45760af2d0ebeb7c46ac2 ]

The Marvell PPv2.2 engine only has 8 Rx queues per CPU, while PPv2.1 has
16 of them. This patch updates the code so that the Rx queues mask width
is selected given the version of the network controller used.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h      | 3 ++-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 7 ++++---
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 67b9e81b7c024..46911b67b0398 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -253,7 +253,8 @@
 #define     MVPP2_ISR_ENABLE_INTERRUPT(mask)	((mask) & 0xffff)
 #define     MVPP2_ISR_DISABLE_INTERRUPT(mask)	(((mask) << 16) & 0xffff0000)
 #define MVPP2_ISR_RX_TX_CAUSE_REG(port)		(0x5480 + 4 * (port))
-#define     MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK	0xffff
+#define     MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK(version) \
+					((version) == MVPP21 ? 0xffff : 0xff)
 #define     MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_MASK	0xff0000
 #define     MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_OFFSET	16
 #define     MVPP2_CAUSE_RX_FIFO_OVERRUN_MASK	BIT(24)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 9b608d23ff7ee..29f1260535325 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -908,7 +908,7 @@ static void mvpp2_interrupts_unmask(void *arg)
 	u32 val;
 
 	val = MVPP2_CAUSE_MISC_SUM_MASK |
-		MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK;
+		MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK(port->priv->hw_version);
 	if (port->has_tx_irqs)
 		val |= MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_MASK;
 
@@ -928,7 +928,7 @@ mvpp2_shared_interrupt_mask_unmask(struct mvpp2_port *port, bool mask)
 	if (mask)
 		val = 0;
 	else
-		val = MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK;
+		val = MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK(MVPP22);
 
 	for (i = 0; i < port->nqvecs; i++) {
 		struct mvpp2_queue_vector *v = port->qvecs + i;
@@ -3059,7 +3059,8 @@ static int mvpp2_poll(struct napi_struct *napi, int budget)
 	}
 
 	/* Process RX packets */
-	cause_rx = cause_rx_tx & MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK;
+	cause_rx = cause_rx_tx &
+		   MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK(port->priv->hw_version);
 	cause_rx <<= qv->first_rxq;
 	cause_rx |= qv->pending_cause_rx;
 	while (cause_rx && budget > 0) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 040/191] net: marvell: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit f03508ce3f9650148262c176e0178413e16c902b ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvneta.c           | 2 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
 drivers/net/ethernet/marvell/pxa168_eth.c       | 3 ++-
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 28762314353f9..4313bbb2396f4 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2394,7 +2394,7 @@ static int mvneta_tx_frag_process(struct mvneta_port *pp, struct sk_buff *skb,
 }
 
 /* Main tx processing */
-static int mvneta_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t mvneta_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mvneta_port *pp = netdev_priv(dev);
 	u16 txq_id = skb_get_queue_mapping(skb);
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 29f1260535325..1cc0e8fda4d5e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -2901,7 +2901,7 @@ static int mvpp2_tx_tso(struct sk_buff *skb, struct net_device *dev,
 }
 
 /* Main tx processing */
-static int mvpp2_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t mvpp2_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mvpp2_port *port = netdev_priv(dev);
 	struct mvpp2_tx_queue *txq, *aggr_txq;
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 3a9730612a704..ff2fea0f8b751 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1260,7 +1260,8 @@ static int pxa168_rx_poll(struct napi_struct *napi, int budget)
 	return work_done;
 }
 
-static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct pxa168_eth_private *pep = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
-- 
2.20.1

[PATCH AUTOSEL 4.19 041/191] net: toshiba: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit bacade822524e02f662d88f784d2ae821a5546fb ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 4 ++--
 drivers/net/ethernet/toshiba/ps3_gelic_net.h | 2 +-
 drivers/net/ethernet/toshiba/spider_net.c    | 4 ++--
 drivers/net/ethernet/toshiba/tc35815.c       | 6 ++++--
 4 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 88d74aef218a2..75237c81c63d6 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -845,9 +845,9 @@ static int gelic_card_kick_txdma(struct gelic_card *card,
  * @skb: packet to send out
  * @netdev: interface device structure
  *
- * returns 0 on success, <0 on failure
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
  */
-int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct gelic_card *card = netdev_card(netdev);
 	struct gelic_descr *descr;
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 003d0452d9cb1..fbbf9b54b173b 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -370,7 +370,7 @@ void gelic_card_up(struct gelic_card *card);
 void gelic_card_down(struct gelic_card *card);
 int gelic_net_open(struct net_device *netdev);
 int gelic_net_stop(struct net_device *netdev);
-int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
 void gelic_net_set_multi(struct net_device *netdev);
 void gelic_net_tx_timeout(struct net_device *netdev);
 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card);
diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index d925b82039966..23417266b7ecc 100644
--- a/drivers/net/ethernet/toshiba/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -880,9 +880,9 @@ spider_net_kick_tx_dma(struct spider_net_card *card)
  * @skb: packet to send out
  * @netdev: interface device structure
  *
- * returns 0 on success, !0 on failure
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
  */
-static int
+static netdev_tx_t
 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	int cnt;
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index 9146068979d2c..03afc4d8c3ec1 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -474,7 +474,8 @@ static void free_rxbuf_skb(struct pci_dev *hwdev, struct sk_buff *skb, dma_addr_
 /* Index to functions, as function prototypes. */
 
 static int	tc35815_open(struct net_device *dev);
-static int	tc35815_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t	tc35815_send_packet(struct sk_buff *skb,
+					    struct net_device *dev);
 static irqreturn_t	tc35815_interrupt(int irq, void *dev_id);
 static int	tc35815_rx(struct net_device *dev, int limit);
 static int	tc35815_poll(struct napi_struct *napi, int budget);
@@ -1248,7 +1249,8 @@ tc35815_open(struct net_device *dev)
  * invariant will hold if you make sure that the netif_*_queue()
  * calls are done at the proper times.
  */
-static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
 	struct tc35815_local *lp = netdev_priv(dev);
 	struct TxFD *txfd;
-- 
2.20.1

[PATCH AUTOSEL 4.19 042/191] net: xilinx: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 81255af8d9d5565004792c295dde49344df450ca ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c       | 3 ++-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 3 ++-
 drivers/net/ethernet/xilinx/xilinx_emaclite.c     | 9 +++++----
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 60abc9250f56a..2241f98970926 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -674,7 +674,8 @@ static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
 	return 0;
 }
 
-static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct temac_local *lp = netdev_priv(ndev);
 	struct cdmac_bd *cur_p;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 66b30ebd45ee8..28764268a44f8 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -657,7 +657,8 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
  * start the transmission. Additionally if checksum offloading is supported,
  * it populates AXI Stream Control fields with appropriate values.
  */
-static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	u32 ii;
 	u32 num_frag;
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 42f1f518dad69..c77c81eb7ab3b 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1020,9 +1020,10 @@ static int xemaclite_close(struct net_device *dev)
  * deferred and the Tx queue is stopped so that the deferred socket buffer can
  * be transmitted when the Emaclite device is free to transmit data.
  *
- * Return:	0, always.
+ * Return:	NETDEV_TX_OK, always.
  */
-static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
+static netdev_tx_t
+xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 {
 	struct net_local *lp = netdev_priv(dev);
 	struct sk_buff *new_skb;
@@ -1044,7 +1045,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 		/* Take the time stamp now, since we can't do this in an ISR. */
 		skb_tx_timestamp(new_skb);
 		spin_unlock_irqrestore(&lp->reset_lock, flags);
-		return 0;
+		return NETDEV_TX_OK;
 	}
 	spin_unlock_irqrestore(&lp->reset_lock, flags);
 
@@ -1053,7 +1054,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 	dev->stats.tx_bytes += len;
 	dev_consume_skb_any(new_skb);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.19 043/191] net: broadcom: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0c13b8d1aee87c35a2fbc1d85a1f766227cf54b5 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +++--
 drivers/net/ethernet/broadcom/sb1250-mac.c   | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 897302adc38ec..50f8a377596e1 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -568,12 +568,13 @@ static irqreturn_t bcm_enet_isr_dma(int irq, void *dev_id)
 /*
  * tx request callback
  */
-static int bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bcm_enet_priv *priv;
 	struct bcm_enet_desc *desc;
 	u32 len_stat;
-	int ret;
+	netdev_tx_t ret;
 
 	priv = netdev_priv(dev);
 
diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index ef4a0c326736d..7e3f9642ba6c5 100644
--- a/drivers/net/ethernet/broadcom/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -299,7 +299,7 @@ static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *,
 static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff);
 static uint64_t sbmac_addr2reg(unsigned char *ptr);
 static irqreturn_t sbmac_intr(int irq, void *dev_instance);
-static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
 static void sbmac_setmulti(struct sbmac_softc *sc);
 static int sbmac_init(struct platform_device *pldev, long long base);
 static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed);
@@ -2028,7 +2028,7 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance)
  *  Return value:
  *  	   nothing
  ********************************************************************* */
-static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	struct sbmac_softc *sc = netdev_priv(dev);
 	unsigned long flags;
-- 
2.20.1

[PATCH AUTOSEL 4.19 044/191] net: amd: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit fe72352e37ae8478f4c97975a9831f0c50f22e73 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/am79c961a.c     | 2 +-
 drivers/net/ethernet/amd/atarilance.c    | 6 ++++--
 drivers/net/ethernet/amd/declance.c      | 2 +-
 drivers/net/ethernet/amd/sun3lance.c     | 6 ++++--
 drivers/net/ethernet/amd/sunlance.c      | 2 +-
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 4 ++--
 6 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index 01d132c02ff90..265039c57023f 100644
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -440,7 +440,7 @@ static void am79c961_timeout(struct net_device *dev)
 /*
  * Transmit a packet
  */
-static int
+static netdev_tx_t
 am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
 {
 	struct dev_priv *priv = netdev_priv(dev);
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index c5b81268c2849..d3d44e07afbc0 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -339,7 +339,8 @@ static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
                                    *init_rec );
 static int lance_open( struct net_device *dev );
 static void lance_init_ring( struct net_device *dev );
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
+				    struct net_device *dev);
 static irqreturn_t lance_interrupt( int irq, void *dev_id );
 static int lance_rx( struct net_device *dev );
 static int lance_close( struct net_device *dev );
@@ -769,7 +770,8 @@ static void lance_tx_timeout (struct net_device *dev)
 
 /* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
 
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
+static netdev_tx_t
+lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct lance_private *lp = netdev_priv(dev);
 	struct lance_ioreg	 *IO = lp->iobase;
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 00332a1ea84b9..9f23703dd509f 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -894,7 +894,7 @@ static void lance_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct lance_private *lp = netdev_priv(dev);
 	volatile struct lance_regs *ll = lp->ll;
diff --git a/drivers/net/ethernet/amd/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
index 77b1db2677309..da7e3d4f41661 100644
--- a/drivers/net/ethernet/amd/sun3lance.c
+++ b/drivers/net/ethernet/amd/sun3lance.c
@@ -236,7 +236,8 @@ struct lance_private {
 static int lance_probe( struct net_device *dev);
 static int lance_open( struct net_device *dev );
 static void lance_init_ring( struct net_device *dev );
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
+				    struct net_device *dev);
 static irqreturn_t lance_interrupt( int irq, void *dev_id);
 static int lance_rx( struct net_device *dev );
 static int lance_close( struct net_device *dev );
@@ -511,7 +512,8 @@ static void lance_init_ring( struct net_device *dev )
 }
 
 
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
+static netdev_tx_t
+lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct lance_private *lp = netdev_priv(dev);
 	int entry, len;
diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index 19f89d9b1781f..9d48998268233 100644
--- a/drivers/net/ethernet/amd/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -1106,7 +1106,7 @@ static void lance_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct lance_private *lp = netdev_priv(dev);
 	int entry, skblen, len;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 24f1053b8785e..d96a84a62d78d 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -2009,7 +2009,7 @@ static int xgbe_close(struct net_device *netdev)
 	return 0;
 }
 
-static int xgbe_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t xgbe_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct xgbe_prv_data *pdata = netdev_priv(netdev);
 	struct xgbe_hw_if *hw_if = &pdata->hw_if;
@@ -2018,7 +2018,7 @@ static int xgbe_xmit(struct sk_buff *skb, struct net_device *netdev)
 	struct xgbe_ring *ring;
 	struct xgbe_packet_data *packet;
 	struct netdev_queue *txq;
-	int ret;
+	netdev_tx_t ret;
 
 	DBGPR("-->xgbe_xmit: skb->len = %d\n", skb->len);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 045/191] net: sun: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0e0cc31f6999df18bb5cfd0bd83c892ed5633975 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/ldmvsw.c         |  2 +-
 drivers/net/ethernet/sun/sunbmac.c        |  3 ++-
 drivers/net/ethernet/sun/sunqe.c          |  2 +-
 drivers/net/ethernet/sun/sunvnet.c        |  2 +-
 drivers/net/ethernet/sun/sunvnet_common.c | 14 ++++++++------
 drivers/net/ethernet/sun/sunvnet_common.h |  7 ++++---
 6 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c
index d42f47f6c632f..644e42c181ee6 100644
--- a/drivers/net/ethernet/sun/ldmvsw.c
+++ b/drivers/net/ethernet/sun/ldmvsw.c
@@ -113,7 +113,7 @@ static u16 vsw_select_queue(struct net_device *dev, struct sk_buff *skb,
 }
 
 /* Wrappers to common functions */
-static int vsw_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t vsw_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	return sunvnet_start_xmit_common(skb, dev, vsw_tx_port_find);
 }
diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c
index f047b27971564..720b7ac77f3b3 100644
--- a/drivers/net/ethernet/sun/sunbmac.c
+++ b/drivers/net/ethernet/sun/sunbmac.c
@@ -950,7 +950,8 @@ static void bigmac_tx_timeout(struct net_device *dev)
 }
 
 /* Put a packet on the wire. */
-static int bigmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+bigmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bigmac *bp = netdev_priv(dev);
 	int len, entry;
diff --git a/drivers/net/ethernet/sun/sunqe.c b/drivers/net/ethernet/sun/sunqe.c
index 7fe0d5e339221..1468fa0a54e9b 100644
--- a/drivers/net/ethernet/sun/sunqe.c
+++ b/drivers/net/ethernet/sun/sunqe.c
@@ -570,7 +570,7 @@ static void qe_tx_timeout(struct net_device *dev)
 }
 
 /* Get a packet queued to go onto the wire. */
-static int qe_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t qe_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct sunqe *qep = netdev_priv(dev);
 	struct sunqe_buffers *qbufs = qep->buffers;
diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c
index 12539b357a784..590172818b922 100644
--- a/drivers/net/ethernet/sun/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -247,7 +247,7 @@ static u16 vnet_select_queue(struct net_device *dev, struct sk_buff *skb,
 }
 
 /* Wrappers to common functions */
-static int vnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t vnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	return sunvnet_start_xmit_common(skb, dev, vnet_tx_port_find);
 }
diff --git a/drivers/net/ethernet/sun/sunvnet_common.c b/drivers/net/ethernet/sun/sunvnet_common.c
index d8f4c3f281505..baa3088b475c7 100644
--- a/drivers/net/ethernet/sun/sunvnet_common.c
+++ b/drivers/net/ethernet/sun/sunvnet_common.c
@@ -1216,9 +1216,10 @@ static inline struct sk_buff *vnet_skb_shape(struct sk_buff *skb, int ncookies)
 	return skb;
 }
 
-static int vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb,
-				struct vnet_port *(*vnet_tx_port)
-				(struct sk_buff *, struct net_device *))
+static netdev_tx_t
+vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb,
+		     struct vnet_port *(*vnet_tx_port)
+		     (struct sk_buff *, struct net_device *))
 {
 	struct net_device *dev = VNET_PORT_TO_NET_DEVICE(port);
 	struct vio_dring_state *dr = &port->vio.drings[VIO_DRIVER_TX_RING];
@@ -1321,9 +1322,10 @@ static int vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }
 
-int sunvnet_start_xmit_common(struct sk_buff *skb, struct net_device *dev,
-			      struct vnet_port *(*vnet_tx_port)
-			      (struct sk_buff *, struct net_device *))
+netdev_tx_t
+sunvnet_start_xmit_common(struct sk_buff *skb, struct net_device *dev,
+			  struct vnet_port *(*vnet_tx_port)
+			  (struct sk_buff *, struct net_device *))
 {
 	struct vnet_port *port = NULL;
 	struct vio_dring_state *dr;
diff --git a/drivers/net/ethernet/sun/sunvnet_common.h b/drivers/net/ethernet/sun/sunvnet_common.h
index 1ea0b016580a4..2b808d2482d60 100644
--- a/drivers/net/ethernet/sun/sunvnet_common.h
+++ b/drivers/net/ethernet/sun/sunvnet_common.h
@@ -136,9 +136,10 @@ int sunvnet_close_common(struct net_device *dev);
 void sunvnet_set_rx_mode_common(struct net_device *dev, struct vnet *vp);
 int sunvnet_set_mac_addr_common(struct net_device *dev, void *p);
 void sunvnet_tx_timeout_common(struct net_device *dev);
-int sunvnet_start_xmit_common(struct sk_buff *skb, struct net_device *dev,
-			   struct vnet_port *(*vnet_tx_port)
-			   (struct sk_buff *, struct net_device *));
+netdev_tx_t
+sunvnet_start_xmit_common(struct sk_buff *skb, struct net_device *dev,
+			  struct vnet_port *(*vnet_tx_port)
+			  (struct sk_buff *, struct net_device *));
 #ifdef CONFIG_NET_POLL_CONTROLLER
 void sunvnet_poll_controller_common(struct net_device *dev, struct vnet *vp);
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.19 046/191] net: hns3: Fix for setting speed for phy failed problem

[Sasha Levin]

From: Fuyun Liang <liangfuyun1@huawei.com>

[ Upstream commit fd8133148eb6a733f9cfdaecd4d99f378e21d582 ]

The function of genphy_read_status is that reading phy information
from HW and using these information to update SW variable. If user
is using ethtool to setting the speed of phy and service task is calling
by hclge_get_mac_phy_link, the result of speed setting is uncertain.
Because ethtool cmd will modified phydev and hclge_get_mac_phy_link also
will modified phydev.

Because phy state machine will update phy link periodically, we can
just use phydev->link to check the link status. This patch removes
function call of genphy_read_status. To ensure accuracy, this patch
adds a phy state check. If phy state is not PHY_RUNNING, we consider
link is down. Because in some scenarios, phydev->link may be link up,
but phy state is not PHY_RUNNING. This is just an intermediate state.
In fact, the link is not ready yet.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 89ca69fa2b97b..6907280d316fb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2367,7 +2367,7 @@ static int hclge_get_mac_phy_link(struct hclge_dev *hdev)
 	mac_state = hclge_get_mac_link_status(hdev);
 
 	if (hdev->hw.mac.phydev) {
-		if (!genphy_read_status(hdev->hw.mac.phydev))
+		if (hdev->hw.mac.phydev->state == PHY_RUNNING)
 			link_stat = mac_state &
 				hdev->hw.mac.phydev->link;
 		else
-- 
2.20.1

[PATCH AUTOSEL 4.19 047/191] net: hns3: Fix cmdq registers initialization issue for vf

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 37dc9cdbdc1bd64bd3b6ea285a9c2e811404dc82 ]

According to hardware's description, the head pointer register should
be written before the tail pointer register while initializing the vf
command queue. Otherwise, it may trigger an interrupt even though there
is no command received.

Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
index fb471fe2c4946..d8c0cc8e04c9d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
@@ -132,8 +132,8 @@ static int hclgevf_init_cmd_queue(struct hclgevf_dev *hdev,
 		reg_val |= HCLGEVF_NIC_CMQ_ENABLE;
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_DEPTH_REG, reg_val);
 
-		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_TAIL_REG, 0);
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_HEAD_REG, 0);
+		hclgevf_write_dev(hw, HCLGEVF_NIC_CSQ_TAIL_REG, 0);
 		break;
 	case HCLGEVF_TYPE_CRQ:
 		reg_val = (u32)ring->desc_dma_addr;
@@ -145,8 +145,8 @@ static int hclgevf_init_cmd_queue(struct hclgevf_dev *hdev,
 		reg_val |= HCLGEVF_NIC_CMQ_ENABLE;
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_DEPTH_REG, reg_val);
 
-		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_TAIL_REG, 0);
 		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_HEAD_REG, 0);
+		hclgevf_write_dev(hw, HCLGEVF_NIC_CRQ_TAIL_REG, 0);
 		break;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 048/191] net: hns3: Clear client pointer when initialize client failed or unintialize finished

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 49dd80541c75c2f21c28bbbdd958e993b55bf97b ]

If initialize client failed or finish uninitializing client, we should
clear the client pointer. It may cause unexpected result when use
uninitialized client. Meanwhile, we also should check whether client
exist when uninitialize it.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 25 +++++++++-----
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      | 33 ++++++++++++++-----
 2 files changed, 41 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 6907280d316fb..671144d1f14ac 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5467,13 +5467,13 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 			vport->nic.client = client;
 			ret = client->ops->init_instance(&vport->nic);
 			if (ret)
-				return ret;
+				goto clear_nic;
 
 			ret = hclge_init_instance_hw(hdev);
 			if (ret) {
 			        client->ops->uninit_instance(&vport->nic,
 			                                     0);
-			        return ret;
+				goto clear_nic;
 			}
 
 			if (hdev->roce_client &&
@@ -5482,11 +5482,11 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 
 				ret = hclge_init_roce_base_info(vport);
 				if (ret)
-					return ret;
+					goto clear_roce;
 
 				ret = rc->ops->init_instance(&vport->roce);
 				if (ret)
-					return ret;
+					goto clear_roce;
 			}
 
 			break;
@@ -5496,7 +5496,7 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 
 			ret = client->ops->init_instance(&vport->nic);
 			if (ret)
-				return ret;
+				goto clear_nic;
 
 			break;
 		case HNAE3_CLIENT_ROCE:
@@ -5508,16 +5508,25 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 			if (hdev->roce_client && hdev->nic_client) {
 				ret = hclge_init_roce_base_info(vport);
 				if (ret)
-					return ret;
+					goto clear_roce;
 
 				ret = client->ops->init_instance(&vport->roce);
 				if (ret)
-					return ret;
+					goto clear_roce;
 			}
 		}
 	}
 
 	return 0;
+
+clear_nic:
+	hdev->nic_client = NULL;
+	vport->nic.client = NULL;
+	return ret;
+clear_roce:
+	hdev->roce_client = NULL;
+	vport->roce.client = NULL;
+	return ret;
 }
 
 static void hclge_uninit_client_instance(struct hnae3_client *client,
@@ -5537,7 +5546,7 @@ static void hclge_uninit_client_instance(struct hnae3_client *client,
 		}
 		if (client->type == HNAE3_CLIENT_ROCE)
 			return;
-		if (client->ops->uninit_instance) {
+		if (hdev->nic_client && client->ops->uninit_instance) {
 			hclge_uninit_instance_hw(hdev);
 			client->ops->uninit_instance(&vport->nic, 0);
 			hdev->nic_client = NULL;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 5570fb5dc2eb4..83fcdd326de71 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1629,17 +1629,17 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 
 		ret = client->ops->init_instance(&hdev->nic);
 		if (ret)
-			return ret;
+			goto clear_nic;
 
 		if (hdev->roce_client && hnae3_dev_roce_supported(hdev)) {
 			struct hnae3_client *rc = hdev->roce_client;
 
 			ret = hclgevf_init_roce_base_info(hdev);
 			if (ret)
-				return ret;
+				goto clear_roce;
 			ret = rc->ops->init_instance(&hdev->roce);
 			if (ret)
-				return ret;
+				goto clear_roce;
 		}
 		break;
 	case HNAE3_CLIENT_UNIC:
@@ -1648,7 +1648,7 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 
 		ret = client->ops->init_instance(&hdev->nic);
 		if (ret)
-			return ret;
+			goto clear_nic;
 		break;
 	case HNAE3_CLIENT_ROCE:
 		if (hnae3_dev_roce_supported(hdev)) {
@@ -1659,15 +1659,24 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 		if (hdev->roce_client && hdev->nic_client) {
 			ret = hclgevf_init_roce_base_info(hdev);
 			if (ret)
-				return ret;
+				goto clear_roce;
 
 			ret = client->ops->init_instance(&hdev->roce);
 			if (ret)
-				return ret;
+				goto clear_roce;
 		}
 	}
 
 	return 0;
+
+clear_nic:
+	hdev->nic_client = NULL;
+	hdev->nic.client = NULL;
+	return ret;
+clear_roce:
+	hdev->roce_client = NULL;
+	hdev->roce.client = NULL;
+	return ret;
 }
 
 static void hclgevf_uninit_client_instance(struct hnae3_client *client,
@@ -1676,13 +1685,19 @@ static void hclgevf_uninit_client_instance(struct hnae3_client *client,
 	struct hclgevf_dev *hdev = ae_dev->priv;
 
 	/* un-init roce, if it exists */
-	if (hdev->roce_client)
+	if (hdev->roce_client) {
 		hdev->roce_client->ops->uninit_instance(&hdev->roce, 0);
+		hdev->roce_client = NULL;
+		hdev->roce.client = NULL;
+	}
 
 	/* un-init nic/unic, if this was not called by roce client */
-	if ((client->ops->uninit_instance) &&
-	    (client->type != HNAE3_CLIENT_ROCE))
+	if (client->ops->uninit_instance && hdev->nic_client &&
+	    client->type != HNAE3_CLIENT_ROCE) {
 		client->ops->uninit_instance(&hdev->nic, 0);
+		hdev->nic_client = NULL;
+		hdev->nic.client = NULL;
+	}
 }
 
 static int hclgevf_pci_init(struct hclgevf_dev *hdev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 049/191] net: hns3: Fix client initialize state issue when roce client initialize failed

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit d9f28fc23d544f673d087b00a6c7132d972f89ea ]

When roce is loaded before nic, the roce client will not be initialized
until nic client is initialized, but roce init flag is set before it.
Furthermore, in this case of nic initialized success and roce failed,
the nic init flag is not set, and roce init flag is not cleared.

This patch fixes it by set init flag only after the client is initialized
successfully.

Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.c          | 12 +++++-------
 drivers/net/ethernet/hisilicon/hns3/hnae3.h          |  3 +++
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c  |  9 +++++++++
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c    |  9 +++++++++
 4 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index 0594a6c3dccda..2097f92e14c5c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -29,8 +29,8 @@ static bool hnae3_client_match(enum hnae3_client_type client_type,
 	return false;
 }
 
-static void hnae3_set_client_init_flag(struct hnae3_client *client,
-				       struct hnae3_ae_dev *ae_dev, int inited)
+void hnae3_set_client_init_flag(struct hnae3_client *client,
+				struct hnae3_ae_dev *ae_dev, int inited)
 {
 	switch (client->type) {
 	case HNAE3_CLIENT_KNIC:
@@ -46,6 +46,7 @@ static void hnae3_set_client_init_flag(struct hnae3_client *client,
 		break;
 	}
 }
+EXPORT_SYMBOL(hnae3_set_client_init_flag);
 
 static int hnae3_get_client_init_flag(struct hnae3_client *client,
 				       struct hnae3_ae_dev *ae_dev)
@@ -86,14 +87,11 @@ static int hnae3_match_n_instantiate(struct hnae3_client *client,
 	/* now, (un-)instantiate client by calling lower layer */
 	if (is_reg) {
 		ret = ae_dev->ops->init_client_instance(client, ae_dev);
-		if (ret) {
+		if (ret)
 			dev_err(&ae_dev->pdev->dev,
 				"fail to instantiate client, ret = %d\n", ret);
-			return ret;
-		}
 
-		hnae3_set_client_init_flag(client, ae_dev, 1);
-		return 0;
+		return ret;
 	}
 
 	if (hnae3_get_client_init_flag(client, ae_dev)) {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 67befff0bfc50..f5c7fc9c5e5cc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -521,4 +521,7 @@ void hnae3_register_ae_algo(struct hnae3_ae_algo *ae_algo);
 
 void hnae3_unregister_client(struct hnae3_client *client);
 int hnae3_register_client(struct hnae3_client *client);
+
+void hnae3_set_client_init_flag(struct hnae3_client *client,
+				struct hnae3_ae_dev *ae_dev, int inited);
 #endif
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 671144d1f14ac..5b579a740e5d1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5476,6 +5476,8 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 				goto clear_nic;
 			}
 
+			hnae3_set_client_init_flag(client, ae_dev, 1);
+
 			if (hdev->roce_client &&
 			    hnae3_dev_roce_supported(hdev)) {
 				struct hnae3_client *rc = hdev->roce_client;
@@ -5487,6 +5489,9 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 				ret = rc->ops->init_instance(&vport->roce);
 				if (ret)
 					goto clear_roce;
+
+				hnae3_set_client_init_flag(hdev->roce_client,
+							   ae_dev, 1);
 			}
 
 			break;
@@ -5498,6 +5503,8 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 			if (ret)
 				goto clear_nic;
 
+			hnae3_set_client_init_flag(client, ae_dev, 1);
+
 			break;
 		case HNAE3_CLIENT_ROCE:
 			if (hnae3_dev_roce_supported(hdev)) {
@@ -5513,6 +5520,8 @@ static int hclge_init_client_instance(struct hnae3_client *client,
 				ret = client->ops->init_instance(&vport->roce);
 				if (ret)
 					goto clear_roce;
+
+				hnae3_set_client_init_flag(client, ae_dev, 1);
 			}
 		}
 	}
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 83fcdd326de71..beae1e2cd59b1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1631,6 +1631,8 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 		if (ret)
 			goto clear_nic;
 
+		hnae3_set_client_init_flag(client, ae_dev, 1);
+
 		if (hdev->roce_client && hnae3_dev_roce_supported(hdev)) {
 			struct hnae3_client *rc = hdev->roce_client;
 
@@ -1640,6 +1642,9 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 			ret = rc->ops->init_instance(&hdev->roce);
 			if (ret)
 				goto clear_roce;
+
+			hnae3_set_client_init_flag(hdev->roce_client, ae_dev,
+						   1);
 		}
 		break;
 	case HNAE3_CLIENT_UNIC:
@@ -1649,6 +1654,8 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 		ret = client->ops->init_instance(&hdev->nic);
 		if (ret)
 			goto clear_nic;
+
+		hnae3_set_client_init_flag(client, ae_dev, 1);
 		break;
 	case HNAE3_CLIENT_ROCE:
 		if (hnae3_dev_roce_supported(hdev)) {
@@ -1665,6 +1672,8 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
 			if (ret)
 				goto clear_roce;
 		}
+
+		hnae3_set_client_init_flag(client, ae_dev, 1);
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 050/191] net: hns3: Fix parameter type for q_id in hclge_tm_q_to_qs_map_cfg()

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 32c7fbc8ffd752c6aa05d2dd7c13b0f0aa00ddaa ]

So far all the places calling hclge_tm_q_to_qs_map_cfg() are assigning
an u16 type value to "q_id", and in the processing of
hclge_tm_q_to_qs_map_cfg(), it also converts the "q_id" to le16.

The max tqp number for pf can be more than 256, we should use "u16" to
store the queue id, instead of "u8", which may cause data lost.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 11e9259ca0407..0d45d045706c7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -298,7 +298,7 @@ static int hclge_tm_qs_to_pri_map_cfg(struct hclge_dev *hdev,
 }
 
 static int hclge_tm_q_to_qs_map_cfg(struct hclge_dev *hdev,
-				    u8 q_id, u16 qs_id)
+				    u16 q_id, u16 qs_id)
 {
 	struct hclge_nq_to_qs_link_cmd *map;
 	struct hclge_desc desc;
-- 
2.20.1

[PATCH AUTOSEL 4.19 051/191] nfp: provide a better warning when ring allocation fails

[Sasha Levin]

From: Jakub Kicinski <jakub.kicinski@netronome.com>

[ Upstream commit 23d9f5531c7c28546954b0bf332134a9b8a38c0a ]

NFP supports fairly enormous ring sizes (up to 256k descriptors).
In commit 466271703867 ("nfp: use kvcalloc() to allocate SW buffer
descriptor arrays") we have started using kvcalloc() functions to
make sure the allocation of software state arrays doesn't hit
the MAX_ORDER limit.  Unfortunately, we can't use virtual mappings
for the DMA region holding HW descriptors.  In case this allocation
fails instead of the generic (and fairly scary) warning/splat in
the logs print a helpful message explaining what happened and
suggesting how to fix it.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/netronome/nfp/nfp_net_common.c  | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
index c6d29fdbb880f..d288c7eebacd8 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
@@ -2187,9 +2187,13 @@ nfp_net_tx_ring_alloc(struct nfp_net_dp *dp, struct nfp_net_tx_ring *tx_ring)
 
 	tx_ring->size = array_size(tx_ring->cnt, sizeof(*tx_ring->txds));
 	tx_ring->txds = dma_zalloc_coherent(dp->dev, tx_ring->size,
-					    &tx_ring->dma, GFP_KERNEL);
-	if (!tx_ring->txds)
+					    &tx_ring->dma,
+					    GFP_KERNEL | __GFP_NOWARN);
+	if (!tx_ring->txds) {
+		netdev_warn(dp->netdev, "failed to allocate TX descriptor ring memory, requested descriptor count: %d, consider lowering descriptor count\n",
+			    tx_ring->cnt);
 		goto err_alloc;
+	}
 
 	tx_ring->txbufs = kvcalloc(tx_ring->cnt, sizeof(*tx_ring->txbufs),
 				   GFP_KERNEL);
@@ -2341,9 +2345,13 @@ nfp_net_rx_ring_alloc(struct nfp_net_dp *dp, struct nfp_net_rx_ring *rx_ring)
 	rx_ring->cnt = dp->rxd_cnt;
 	rx_ring->size = array_size(rx_ring->cnt, sizeof(*rx_ring->rxds));
 	rx_ring->rxds = dma_zalloc_coherent(dp->dev, rx_ring->size,
-					    &rx_ring->dma, GFP_KERNEL);
-	if (!rx_ring->rxds)
+					    &rx_ring->dma,
+					    GFP_KERNEL | __GFP_NOWARN);
+	if (!rx_ring->rxds) {
+		netdev_warn(dp->netdev, "failed to allocate RX descriptor ring memory, requested descriptor count: %d, consider lowering descriptor count\n",
+			    rx_ring->cnt);
 		goto err_alloc;
+	}
 
 	rx_ring->rxbufs = kvcalloc(rx_ring->cnt, sizeof(*rx_ring->rxbufs),
 				   GFP_KERNEL);
-- 
2.20.1

[PATCH AUTOSEL 4.19 052/191] usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started

[Sasha Levin]

From: Nicolas Adell <nicolas.adell@actia.fr>

[ Upstream commit 1dedbdf2bbb1ede8d96f35f9845ecae179dc1988 ]

When initializing the USB subsystem before starting the kernel,
OTG overcurrent detection is disabled. In case the OTG polarity of
overcurrent is low active, the overcurrent detection is never enabled
again and events cannot be reported as expected. Because imx usb
overcurrent polarity is low active by default, only detection needs
to be enable in usbmisc init function.

Signed-off-by: Nicolas Adell <nicolas.adell@actia.fr>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/usbmisc_imx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 34ad5bf8acd8d..424ecb1f003fe 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -343,6 +343,8 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 	} else if (data->oc_polarity == 1) {
 		/* High active */
 		reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
+	} else {
+		reg &= ~(MX6_BM_OVER_CUR_DIS);
 	}
 	writel(reg, usbmisc->base + data->index * 4);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 053/191] usb: chipidea: Fix otg event handler

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit 59739131e0ca06db7560f9073fff2fb83f6bc2a5 ]

At OTG work running time, it's possible that several events need to be
addressed (e.g. ID and VBUS events). The current implementation handles
only one event at a time which leads to ignoring the other one. Fix it.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/otg.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index db4ceffcf2a61..f25d4827fd49c 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -203,14 +203,17 @@ static void ci_otg_work(struct work_struct *work)
 	}
 
 	pm_runtime_get_sync(ci->dev);
+
 	if (ci->id_event) {
 		ci->id_event = false;
 		ci_handle_id_switch(ci);
-	} else if (ci->b_sess_valid_event) {
+	}
+
+	if (ci->b_sess_valid_event) {
 		ci->b_sess_valid_event = false;
 		ci_handle_vbus_change(ci);
-	} else
-		dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+	}
+
 	pm_runtime_put_sync(ci->dev);
 
 	enable_irq(ci->irq);
-- 
2.20.1

[PATCH AUTOSEL 4.19 054/191] usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_OUT

[Sasha Levin]

From: Guido Kiener <guido@kiener-muenchen.de>

[ Upstream commit 0e59088e7ff7aeda49dedadbf0e967761b909ad8 ]

Add parameter 'tag' to function usbtmc_ioctl_abort_bulk_out_tag()
for future versions.

Use USBTMC_BUFSIZE (4k) instead of USBTMC_SIZE_IOBUFFER (2k).
Using USBTMC_SIZE_IOBUFFER is deprecated.

Insert a sleep of 50 ms between subsequent
CHECK_ABORT_BULK_OUT_STATUS control requests to avoid stressing
the instrument with repeated requests.

Use common macro USB_CTRL_GET_TIMEOUT instead of USBTMC_TIMEOUT.

Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/class/usbtmc.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 83ffa5a14c3db..3ce45c9e9d20d 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -342,7 +342,8 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
 
 }
 
-static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
+static int usbtmc_ioctl_abort_bulk_out_tag(struct usbtmc_device_data *data,
+					   u8 tag)
 {
 	struct device *dev;
 	u8 *buffer;
@@ -359,8 +360,8 @@ static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
 			     usb_rcvctrlpipe(data->usb_dev, 0),
 			     USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT,
 			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
-			     data->bTag_last_write, data->bulk_out,
-			     buffer, 2, USBTMC_TIMEOUT);
+			     tag, data->bulk_out,
+			     buffer, 2, USB_CTRL_GET_TIMEOUT);
 
 	if (rv < 0) {
 		dev_err(dev, "usb_control_msg returned %d\n", rv);
@@ -379,12 +380,14 @@ static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
 	n = 0;
 
 usbtmc_abort_bulk_out_check_status:
+	/* do not stress device with subsequent requests */
+	msleep(50);
 	rv = usb_control_msg(data->usb_dev,
 			     usb_rcvctrlpipe(data->usb_dev, 0),
 			     USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS,
 			     USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
 			     0, data->bulk_out, buffer, 0x08,
-			     USBTMC_TIMEOUT);
+			     USB_CTRL_GET_TIMEOUT);
 	n++;
 	if (rv < 0) {
 		dev_err(dev, "usb_control_msg returned %d\n", rv);
@@ -418,6 +421,11 @@ static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
 	return rv;
 }
 
+static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
+{
+	return usbtmc_ioctl_abort_bulk_out_tag(data, data->bTag_last_write);
+}
+
 static int usbtmc488_ioctl_read_stb(struct usbtmc_file_data *file_data,
 				void __user *arg)
 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 055/191] s390/zcrypt: enable AP bus scan without a valid default domain

[Sasha Levin]

From: Halil Pasic <pasic@linux.ibm.com>

[ Upstream commit 1c472d46283263497adccd7a0bec64ee2f9c09e5 ]

The AP bus scan is aborted before doing anything worth mentioning if
ap_select_domain() fails, e.g. if the ap_rights.aqm mask is all zeros.
As the result of this the ap bus fails to manage (e.g. create and
register) devices like it is supposed to.

Let us make ap_scan_bus() work even if ap_select_domain() can't select a
default domain. Let's also make ap_select_domain() return void, as there
are no more callers interested in its return value.

Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Michael Mueller <mimu@linux.ibm.com>
Fixes: 7e0bdbe5c21c "s390/zcrypt: AP bus support for alternate driver(s)"
[freude@linux.ibm.com: title and patch header slightly modified]
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/crypto/ap_bus.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 3be54651698a3..027a53eec42a5 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1223,11 +1223,10 @@ static struct bus_attribute *const ap_bus_attrs[] = {
 };
 
 /**
- * ap_select_domain(): Select an AP domain.
- *
- * Pick one of the 16 AP domains.
+ * ap_select_domain(): Select an AP domain if possible and we haven't
+ * already done so before.
  */
-static int ap_select_domain(void)
+static void ap_select_domain(void)
 {
 	int count, max_count, best_domain;
 	struct ap_queue_status status;
@@ -1242,7 +1241,7 @@ static int ap_select_domain(void)
 	if (ap_domain_index >= 0) {
 		/* Domain has already been selected. */
 		spin_unlock_bh(&ap_domain_lock);
-		return 0;
+		return;
 	}
 	best_domain = -1;
 	max_count = 0;
@@ -1269,11 +1268,8 @@ static int ap_select_domain(void)
 	if (best_domain >= 0) {
 		ap_domain_index = best_domain;
 		AP_DBF(DBF_DEBUG, "new ap_domain_index=%d\n", ap_domain_index);
-		spin_unlock_bh(&ap_domain_lock);
-		return 0;
 	}
 	spin_unlock_bh(&ap_domain_lock);
-	return -ENODEV;
 }
 
 /*
@@ -1351,8 +1347,7 @@ static void ap_scan_bus(struct work_struct *unused)
 	AP_DBF(DBF_DEBUG, "%s running\n", __func__);
 
 	ap_query_configuration(ap_configuration);
-	if (ap_select_domain() != 0)
-		goto out;
+	ap_select_domain();
 
 	for (id = 0; id < AP_DEVICES; id++) {
 		/* check if device is registered */
@@ -1468,12 +1463,11 @@ static void ap_scan_bus(struct work_struct *unused)
 		}
 	} /* end device loop */
 
-	if (defdomdevs < 1)
+	if (ap_domain_index >= 0 && defdomdevs < 1)
 		AP_DBF(DBF_INFO,
 		       "no queue device with default domain %d available\n",
 		       ap_domain_index);
 
-out:
 	mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 056/191] s390/vdso: avoid 64-bit vdso mapping for compat tasks

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit d1befa65823e9c6d013883b8a41d081ec338c489 ]

vdso_fault used is_compat_task function (on s390 it tests "current"
thread_info flags) to distinguish compat tasks and map 31-bit vdso
pages. But "current" task might not correspond to mm context.

When 31-bit compat inferior is executed under gdb, gdb does
PTRACE_PEEKTEXT on vdso page, causing vdso_fault with "current" being
64-bit gdb process. So, 31-bit inferior ends up with 64-bit vdso mapped.

To avoid this problem a new compat_mm flag has been introduced into
mm context. This flag is used in vdso_fault and vdso_mremap instead
of is_compat_task.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/mmu.h         | 2 ++
 arch/s390/include/asm/mmu_context.h | 1 +
 arch/s390/kernel/vdso.c             | 8 +++++---
 3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index a8418e1379eb7..bcfb6371086f2 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -32,6 +32,8 @@ typedef struct {
 	unsigned int uses_cmm:1;
 	/* The gmaps associated with this context are allowed to use huge pages. */
 	unsigned int allow_gmap_hpage_1m:1;
+	/* The mmu context is for compat task */
+	unsigned int compat_mm:1;
 } mm_context_t;
 
 #define INIT_MM_CONTEXT(name)						   \
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 09b61d0e491f6..e4462202200d7 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -25,6 +25,7 @@ static inline int init_new_context(struct task_struct *tsk,
 	atomic_set(&mm->context.flush_count, 0);
 	mm->context.gmap_asce = 0;
 	mm->context.flush_mm = 0;
+	mm->context.compat_mm = 0;
 #ifdef CONFIG_PGSTE
 	mm->context.alloc_pgste = page_table_allocate_pgste ||
 		test_thread_flag(TIF_PGSTE) ||
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 3031cc6dd0ab4..ec31b48a42a52 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -56,7 +56,7 @@ static vm_fault_t vdso_fault(const struct vm_special_mapping *sm,
 	vdso_pagelist = vdso64_pagelist;
 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (is_compat_task()) {
+	if (vma->vm_mm->context.compat_mm) {
 		vdso_pagelist = vdso32_pagelist;
 		vdso_pages = vdso32_pages;
 	}
@@ -77,7 +77,7 @@ static int vdso_mremap(const struct vm_special_mapping *sm,
 
 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (is_compat_task())
+	if (vma->vm_mm->context.compat_mm)
 		vdso_pages = vdso32_pages;
 #endif
 
@@ -224,8 +224,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 
 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (is_compat_task())
+	if (is_compat_task()) {
 		vdso_pages = vdso32_pages;
+		mm->context.compat_mm = 1;
+	}
 #endif
 	/*
 	 * vDSO has a problem and was disabled, just don't "enable" it for
-- 
2.20.1

[PATCH AUTOSEL 4.19 057/191] s390/vdso: correct CFI annotations of vDSO functions

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit 26f4414a45b808f83d42d6fd2fbf4a59ef25e84b ]

Correct stack frame overhead for 31-bit vdso, which should be 96 rather
then 160. This is done by reusing STACK_FRAME_OVERHEAD definition which
contains correct value based on build flags. This fixes stack unwinding
within vdso code for 31-bit processes. While at it replace all hard coded
stack frame overhead values with the same definition in vdso64 as well.

Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/vdso32/clock_gettime.S | 19 ++++++++++---------
 arch/s390/kernel/vdso32/gettimeofday.S  |  3 ++-
 arch/s390/kernel/vdso64/clock_gettime.S | 25 +++++++++++++------------
 arch/s390/kernel/vdso64/gettimeofday.S  |  3 ++-
 4 files changed, 27 insertions(+), 23 deletions(-)

diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index a9418bf975db5..ada5c11a16e5a 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -10,6 +10,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/dwarf.h>
+#include <asm/ptrace.h>
 
 	.text
 	.align 4
@@ -18,8 +19,8 @@
 __kernel_clock_gettime:
 	CFI_STARTPROC
 	ahi	%r15,-16
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 	basr	%r5,0
 0:	al	%r5,21f-0b(%r5)			/* get &_vdso_data */
 	chi	%r2,__CLOCK_REALTIME_COARSE
@@ -72,13 +73,13 @@ __kernel_clock_gettime:
 	st	%r1,4(%r3)			/* store tp->tv_nsec */
 	lhi	%r2,0
 	ahi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 
 	/* CLOCK_MONOTONIC_COARSE */
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 9:	l	%r4,__VDSO_UPD_COUNT+4(%r5)	/* load update counter */
 	tml	%r4,0x0001			/* pending update ? loop */
 	jnz	9b
@@ -158,17 +159,17 @@ __kernel_clock_gettime:
 	st	%r1,4(%r3)			/* store tp->tv_nsec */
 	lhi	%r2,0
 	ahi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 
 	/* Fallback to system call */
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 19:	lhi	%r1,__NR_clock_gettime
 	svc	0
 	ahi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 	CFI_ENDPROC
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index 3c0db0fa6ad90..b23063fbc892c 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -10,6 +10,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/dwarf.h>
+#include <asm/ptrace.h>
 
 	.text
 	.align 4
@@ -19,7 +20,7 @@ __kernel_gettimeofday:
 	CFI_STARTPROC
 	ahi	%r15,-16
 	CFI_ADJUST_CFA_OFFSET 16
-	CFI_VAL_OFFSET 15, -160
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 	basr	%r5,0
 0:	al	%r5,13f-0b(%r5)			/* get &_vdso_data */
 1:	ltr	%r3,%r3				/* check if tz is NULL */
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index fac3ab5ec83a9..9d2ee79b90f25 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -10,6 +10,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/dwarf.h>
+#include <asm/ptrace.h>
 
 	.text
 	.align 4
@@ -18,8 +19,8 @@
 __kernel_clock_gettime:
 	CFI_STARTPROC
 	aghi	%r15,-16
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 	larl	%r5,_vdso_data
 	cghi	%r2,__CLOCK_REALTIME_COARSE
 	je	4f
@@ -56,13 +57,13 @@ __kernel_clock_gettime:
 	stg	%r1,8(%r3)			/* store tp->tv_nsec */
 	lghi	%r2,0
 	aghi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 
 	/* CLOCK_MONOTONIC_COARSE */
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 3:	lg	%r4,__VDSO_UPD_COUNT(%r5)	/* load update counter */
 	tmll	%r4,0x0001			/* pending update ? loop */
 	jnz	3b
@@ -115,13 +116,13 @@ __kernel_clock_gettime:
 	stg	%r1,8(%r3)			/* store tp->tv_nsec */
 	lghi	%r2,0
 	aghi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 
 	/* CPUCLOCK_VIRT for this thread */
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 9:	lghi	%r4,0
 	icm	%r0,15,__VDSO_ECTG_OK(%r5)
 	jz	12f
@@ -142,17 +143,17 @@ __kernel_clock_gettime:
 	stg	%r4,8(%r3)
 	lghi	%r2,0
 	aghi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 
 	/* Fallback to system call */
-	CFI_DEF_CFA_OFFSET 176
-	CFI_VAL_OFFSET 15, -160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD+16
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 12:	lghi	%r1,__NR_clock_gettime
 	svc	0
 	aghi	%r15,16
-	CFI_DEF_CFA_OFFSET 160
+	CFI_DEF_CFA_OFFSET STACK_FRAME_OVERHEAD
 	CFI_RESTORE 15
 	br	%r14
 	CFI_ENDPROC
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index 6e1f0b421695a..aebe10dc7c99a 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -10,6 +10,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/dwarf.h>
+#include <asm/ptrace.h>
 
 	.text
 	.align 4
@@ -19,7 +20,7 @@ __kernel_gettimeofday:
 	CFI_STARTPROC
 	aghi	%r15,-16
 	CFI_ADJUST_CFA_OFFSET 16
-	CFI_VAL_OFFSET 15, -160
+	CFI_VAL_OFFSET 15, -STACK_FRAME_OVERHEAD
 	larl	%r5,_vdso_data
 0:	ltgr	%r3,%r3				/* check if tz is NULL */
 	je	1f
-- 
2.20.1

[PATCH AUTOSEL 4.19 058/191] brcmfmac: increase buffer for obtaining firmware capabilities

[Sasha Levin]

From: Arend van Spriel <arend.vanspriel@broadcom.com>

[ Upstream commit 59c2a30d36c8ae430d26a902c4c9665ea33ccee5 ]

When obtaining the firmware capability a buffer is provided of 512
bytes. However, if all features in firmware are supported the buffer
needs to be 565 bytes as otherwise truncated information is retrieved
from firmware. Increasing the buffer to 768 bytes on stack.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 8347da632a5b0..4c5a3995dc352 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -178,7 +178,7 @@ static void brcmf_feat_iovar_data_set(struct brcmf_if *ifp,
 	ifp->fwil_fwerr = false;
 }
 
-#define MAX_CAPS_BUFFER_SIZE	512
+#define MAX_CAPS_BUFFER_SIZE	768
 static void brcmf_feat_firmware_capabilities(struct brcmf_if *ifp)
 {
 	char caps[MAX_CAPS_BUFFER_SIZE];
-- 
2.20.1

[PATCH AUTOSEL 4.19 059/191] brcmsmac: Use kvmalloc() for ucode allocations

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 6c3efbe77bc78bf49db851aec7f385be475afca6 ]

The ucode chunk might be relatively large and the allocation with
kmalloc() may fail occasionally.  Since the data isn't DMA-transferred
but by manual loops, we can use vmalloc instead of kmalloc.
For a better performance, though, kvmalloc() would be the best choice
in such a case, so let's replace with it.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103431
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c  | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index ecc89e718b9c1..6255fb6d97a70 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -1578,10 +1578,10 @@ int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
 			if (le32_to_cpu(hdr->idx) == idx) {
 				pdata = wl->fw.fw_bin[i]->data +
 					le32_to_cpu(hdr->offset);
-				*pbuf = kmemdup(pdata, len, GFP_KERNEL);
+				*pbuf = kvmalloc(len, GFP_KERNEL);
 				if (*pbuf == NULL)
 					goto fail;
-
+				memcpy(*pbuf, pdata, len);
 				return 0;
 			}
 		}
@@ -1629,7 +1629,7 @@ int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
  */
 void brcms_ucode_free_buf(void *p)
 {
-	kfree(p);
+	kvfree(p);
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 060/191] mlxsw: spectrum: Init shaper for TCs 8..15

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit a9f36656b519a9a21309793c306941a3cd0eeb8f ]

With introduction of MC-aware mode to mlxsw, it became necessary to
configure TCs above 7 as well. There is now code in mlxsw to disable ETS
for these higher classes, but disablement of max shaper was neglected.

By default, max shaper is currently disabled to begin with, so the
problem is just cosmetic. However, for symmetry, do like we do for ETS
configuration, and call mlxsw_sp_port_ets_maxrate_set() for both TC i
and i + 8.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index ccd9aca281b37..1c170a0fd2cc9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2815,6 +2815,13 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
 						    MLXSW_REG_QEEC_MAS_DIS);
 		if (err)
 			return err;
+
+		err = mlxsw_sp_port_ets_maxrate_set(mlxsw_sp_port,
+						    MLXSW_REG_QEEC_HIERARCY_TC,
+						    i + 8, i,
+						    MLXSW_REG_QEEC_MAS_DIS);
+		if (err)
+			return err;
 	}
 
 	/* Map all priorities to traffic class 0. */
-- 
2.20.1

[PATCH AUTOSEL 4.19 061/191] PCI: portdrv: Initialize service drivers directly

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit c29de84149aba5f74e87b6491c13ac7203c12f55 ]

The PCI port driver saves the PCI state after initializing the device with
the applicable service devices.  This was, however, before the service
drivers were even registered because PCI probe happens before the
device_initcall initialized those service drivers.  The config space state
that the services set up were not being saved.  The end result would cause
PCI devices to not react to events that the drivers think they did if the
PCI state ever needed to be restored.

Fix this by changing the service drivers from using the init calls to
having the portdrv driver calling the services directly.  This will get the
state saved as desired, while making the relationship between the port
driver and the services under it more explicit in the code.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/pciehp_core.c |  3 +--
 drivers/pci/pcie/aer.c            |  3 +--
 drivers/pci/pcie/dpc.c            |  3 +--
 drivers/pci/pcie/pme.c            |  3 +--
 drivers/pci/pcie/portdrv.h        | 24 ++++++++++++++++++++++++
 drivers/pci/pcie/portdrv_pci.c    |  9 +++++++++
 6 files changed, 37 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index ec48c9433ae50..518c46f8e63b7 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -348,7 +348,7 @@ static struct pcie_port_service_driver hpdriver_portdrv = {
 #endif	/* PM */
 };
 
-static int __init pcied_init(void)
+int __init pcie_hp_init(void)
 {
 	int retval = 0;
 
@@ -359,4 +359,3 @@ static int __init pcied_init(void)
 
 	return retval;
 }
-device_initcall(pcied_init);
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 83180edd6ed47..637d638f73da5 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1569,10 +1569,9 @@ static struct pcie_port_service_driver aerdriver = {
  *
  * Invoked when AER root service driver is loaded.
  */
-static int __init aer_service_init(void)
+int __init pcie_aer_init(void)
 {
 	if (!pci_aer_available() || aer_acpi_firmware_first())
 		return -ENXIO;
 	return pcie_port_service_register(&aerdriver);
 }
-device_initcall(aer_service_init);
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 1908dd2978d3c..118b5bcae42ea 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -307,8 +307,7 @@ static struct pcie_port_service_driver dpcdriver = {
 	.reset_link	= dpc_reset_link,
 };
 
-static int __init dpc_service_init(void)
+int __init pcie_dpc_init(void)
 {
 	return pcie_port_service_register(&dpcdriver);
 }
-device_initcall(dpc_service_init);
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 6ac17f0c40775..54d593d10396f 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -455,8 +455,7 @@ static struct pcie_port_service_driver pcie_pme_driver = {
 /**
  * pcie_pme_service_init - Register the PCIe PME service driver.
  */
-static int __init pcie_pme_service_init(void)
+int __init pcie_pme_init(void)
 {
 	return pcie_port_service_register(&pcie_pme_driver);
 }
-device_initcall(pcie_pme_service_init);
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index d59afa42fc14b..2498b2d340095 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -23,6 +23,30 @@
 
 #define PCIE_PORT_DEVICE_MAXSERVICES   4
 
+#ifdef CONFIG_PCIEAER
+int pcie_aer_init(void);
+#else
+static inline int pcie_aer_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_HOTPLUG_PCI_PCIE
+int pcie_hp_init(void);
+#else
+static inline int pcie_hp_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_PCIE_PME
+int pcie_pme_init(void);
+#else
+static inline int pcie_pme_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_PCIE_DPC
+int pcie_dpc_init(void);
+#else
+static inline int pcie_dpc_init(void) { return 0; }
+#endif
+
 /* Port Type */
 #define PCIE_ANY_PORT			(~0)
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index eef22dc29140c..23a5a0c2c3fe9 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -226,11 +226,20 @@ static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
 	 {}
 };
 
+static void __init pcie_init_services(void)
+{
+	pcie_aer_init();
+	pcie_pme_init();
+	pcie_dpc_init();
+	pcie_hp_init();
+}
+
 static int __init pcie_portdrv_init(void)
 {
 	if (pcie_ports_disabled)
 		return -EACCES;
 
+	pcie_init_services();
 	dmi_check_system(pcie_portdrv_dmi_table);
 
 	return pci_register_driver(&pcie_portdriver);
-- 
2.20.1

[PATCH AUTOSEL 4.19 062/191] ARM: dts: am335x-evm: fix number of cpsw

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ]

am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.

Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-evm.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 20bbb899b3b76..cc59e42c91342 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -731,6 +731,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -738,15 +739,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 063/191] ARM: dts: ti: Fix SPI and I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit cc893871f092be9ac1184a78f9ae1e76b85d5317 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/am437x-idk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am437x-sk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am43x-epos-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/omap3-n9.dtb: Warning (i2c_bus_reg): /ocp@68000000/i2c@48060000/ak8975@0f: I2C bus unit address format error, expected "f"
arch/arm/boot/dts/am335x-osd3358-sm-red.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/pressure@78: I2C bus unit address format error, expected "76"
arch/arm/boot/dts/am335x-boneblack.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am335x-boneblack-wireless.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am335x-sancloud-bbe.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am571x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am572x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am574x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am57xx-cl-som-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am57xx-sbc-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra72-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra72-evm-revc.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra76-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra7-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am335x-pdu001.dtb: Warning (spi_bus_reg): /ocp/spi@481a0000/cfaf240320a032t: SPI bus unit address format error, expected "0"
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi'

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
[tony@atomide.com: fixed mode to 644 for am335x-osd3358-sm-red.dts while at it]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-boneblack-common.dtsi | 2 +-
 arch/arm/boot/dts/am335x-osd3358-sm-red.dts    | 2 +-
 arch/arm/boot/dts/am335x-pdu001.dts            | 2 +-
 arch/arm/boot/dts/am4372.dtsi                  | 2 +-
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts      | 2 +-
 arch/arm/boot/dts/dra7.dtsi                    | 2 +-
 arch/arm/boot/dts/keystone-k2g.dtsi            | 2 +-
 arch/arm/boot/dts/omap2.dtsi                   | 4 ++--
 arch/arm/boot/dts/omap2430.dtsi                | 2 +-
 arch/arm/boot/dts/omap3-n9.dts                 | 2 +-
 10 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 325daae40278a..21bc1173fa6b9 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -88,7 +88,7 @@
 };
 
 &i2c0 {
-	tda19988: tda19988 {
+	tda19988: tda19988@70 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
 
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 4d969013f99a6..d9e92671055bd 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -161,7 +161,7 @@
 		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
 	};
 
-	bmp280: pressure@78 {
+	bmp280: pressure@76 {
 		compatible = "bosch,bmp280";
 		reg = <0x76>;
 	};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 1ad530a39a957..34fb63ef420f5 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -373,7 +373,7 @@
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	cfaf240320a032t {
+	display-controller@0 {
 		compatible = "orisetech,otm3225a";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index cf1e4f747242f..09e58fb810d95 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1101,7 +1101,7 @@
 			};
 		};
 
-		qspi: qspi@47900000 {
+		qspi: spi@47900000 {
 			compatible = "ti,am4372-qspi";
 			reg = <0x47900000 0x100>,
 			      <0x30000000 0x4000000>;
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 203266f884807..52ae8eef60fc3 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -518,7 +518,7 @@
 	};
 
 	/* touch controller */
-	ads7846@0 {
+	touchscreen@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ads7846_pins>;
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 2cb45ddd2ae3b..9136b3cf9a2ce 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1369,7 +1369,7 @@
 			status = "disabled";
 		};
 
-		qspi: qspi@4b300000 {
+		qspi: spi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
 			      <0x5c000000 0x4000000>;
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 738b44cf2b0bb..1c833105d6c54 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -416,7 +416,7 @@
 			clock-names = "fck", "mmchsdb_fck";
 		};
 
-		qspi: qspi@2940000 {
+		qspi: spi@2940000 {
 			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f1d6de8b3c193..000bf16de6517 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -114,7 +114,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		mcspi1: mcspi@48098000 {
+		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@
 				    "tx2", "rx2", "tx3", "rx3";
 		};
 
-		mcspi2: mcspi@4809a000 {
+		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 84635eeb99cd4..7f57af2f10acb 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -285,7 +285,7 @@
 			ti,timer-alwon;
 		};
 
-		mcspi3: mcspi@480b8000 {
+		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi3";
 			reg = <0x480b8000 0x100>;
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index ded5fcf084eb7..1f91646b89516 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -40,7 +40,7 @@
 };
 
 &i2c3 {
-	ak8975@0f {
+	ak8975@f {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0f>;
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 064/191] f2fs: avoid infinite loop in f2fs_alloc_nid

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit f84262b0862d43b71b3e80a036cdd9d82e620367 ]

If we have an error in f2fs_build_free_nids, we're able to fall into a loop
to find free nids.

Suggested-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/node.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index aa8f19e1bdb3d..e5d474681471c 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -2367,8 +2367,9 @@ bool f2fs_alloc_nid(struct f2fs_sb_info *sbi, nid_t *nid)
 	spin_unlock(&nm_i->nid_list_lock);
 
 	/* Let's scan nat pages and its caches to get free nids */
-	f2fs_build_free_nids(sbi, true, false);
-	goto retry;
+	if (!f2fs_build_free_nids(sbi, true, false))
+		goto retry;
+	return false;
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 4.19 065/191] f2fs: fix to recover inode's uid/gid during POR

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit dc4cd1257c86451cec3e8e352cc376348e4f4af4 ]

Step to reproduce this bug:
1. logon as root
2. mount -t f2fs /dev/sdd /mnt;
3. touch /mnt/file;
4. chown system /mnt/file; chgrp system /mnt/file;
5. xfs_io -f /mnt/file -c "fsync";
6. godown /mnt;
7. umount /mnt;
8. mount -t f2fs /dev/sdd /mnt;

After step 8) we will expect file's uid/gid are all system, but during
recovery, these two fields were not been recovered, fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/recovery.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 2c3be4c3c626f..2c5d2c25d37e3 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -216,6 +216,8 @@ static void recover_inode(struct inode *inode, struct page *page)
 	char *name;
 
 	inode->i_mode = le16_to_cpu(raw->i_mode);
+	i_uid_write(inode, le32_to_cpu(raw->i_uid));
+	i_gid_write(inode, le32_to_cpu(raw->i_gid));
 	f2fs_i_size_write(inode, le64_to_cpu(raw->i_size));
 	inode->i_atime.tv_sec = le64_to_cpu(raw->i_atime);
 	inode->i_ctime.tv_sec = le64_to_cpu(raw->i_ctime);
-- 
2.20.1

[PATCH AUTOSEL 4.19 066/191] ARM: dts: ux500: Correct SCU unit address

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]

The unit address of the Cortex-A9 SCU device node contains one zero too
many.  Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768c..3dc0028e108b3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -197,7 +197,7 @@
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
-- 
2.20.1

[PATCH AUTOSEL 4.19 067/191] ARM: dts: ux500: Fix LCDA clock line muxing

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]

The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 5c5cea232743d..1ec193b0c5065 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -607,16 +607,20 @@
 
 			mcde {
 				lcd_default_mode: lcd_default {
-					default_mux {
+					default_mux1 {
 						/* Mux in VSI0 and all the data lines */
 						function = "lcd";
 						groups =
 						"lcdvsi0_a_1", /* VSI0 for LCD */
 						"lcd_d0_d7_a_1", /* Data lines */
 						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
 						"lcdvsi1_a_1"; /* VSI1 for HDMI */
 					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
+					};
 					default_cfg1 {
 						pins =
 						"GPIO68_E1", /* VSI0 */
-- 
2.20.1

[PATCH AUTOSEL 4.19 068/191] ARM: dts: ste: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi     | 4 ++--
 arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
 arch/arm/boot/dts/ste-snowball.dts    | 2 +-
 arch/arm/boot/dts/ste-u300.dts        | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 3dc0028e108b3..986767735e249 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -878,7 +878,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +892,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80003000 {
+		spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 3f14b4df69b4e..94eeb7f1c9478 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
 			};
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			/*
 			 * On the first generation boards, this SSP/SPI port was connected
 			 * to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b0b94d0530985..603890461ae0f 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39e..1bd1aba3322f1 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,7 +442,7 @@
 			dma-names = "rx";
 		};
 
-		spi: ssp@c0006000 {
+		spi: spi@c0006000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xc0006000 0x1000>;
 			interrupt-parent = <&vica>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 069/191] spi: pic32: Use proper enum in dmaengine_prep_slave_rg

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 8cfde7847d5ed0bb77bace41519572963e43cd17 ]

Clang warns when one enumerated type is converted implicitly to another:

drivers/spi/spi-pic32.c:323:8: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
                                          DMA_FROM_DEVICE,
                                          ^~~~~~~~~~~~~~~
drivers/spi/spi-pic32.c:333:8: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
                                          DMA_TO_DEVICE,
                                          ^~~~~~~~~~~~~
2 warnings generated.

Use the proper enums from dma_transfer_direction (DMA_FROM_DEVICE =
DMA_DEV_TO_MEM = 2, DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1) to satify Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/159
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pic32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index f8a45af1fa9f2..288002f6c613e 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -320,7 +320,7 @@ static int pic32_spi_dma_transfer(struct pic32_spi *pic32s,
 	desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
 					  xfer->rx_sg.sgl,
 					  xfer->rx_sg.nents,
-					  DMA_FROM_DEVICE,
+					  DMA_DEV_TO_MEM,
 					  DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_rx) {
 		ret = -EINVAL;
@@ -330,7 +330,7 @@ static int pic32_spi_dma_transfer(struct pic32_spi *pic32s,
 	desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
 					  xfer->tx_sg.sgl,
 					  xfer->tx_sg.nents,
-					  DMA_TO_DEVICE,
+					  DMA_MEM_TO_DEV,
 					  DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_tx) {
 		ret = -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.19 070/191] crypto: chacha20 - Fix chacha20_block() keystream alignment (again)

[Sasha Levin]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit a5e9f557098e54af44ade5d501379be18435bfbf ]

In commit 9f480faec58c ("crypto: chacha20 - Fix keystream alignment for
chacha20_block()"), I had missed that chacha20_block() can be called
directly on the buffer passed to get_random_bytes(), which can have any
alignment.  So, while my commit didn't break anything, it didn't fully
solve the alignment problems.

Revert my solution and just update chacha20_block() to use
put_unaligned_le32(), so the output buffer need not be aligned.
This is simpler, and on many CPUs it's the same speed.

But, I kept the 'tmp' buffers in extract_crng_user() and
_get_random_bytes() 4-byte aligned, since that alignment is actually
needed for _crng_backtrack_protect() too.

Reported-by: Stephan Müller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/chacha20_generic.c |  7 ++++---
 drivers/char/random.c     | 24 ++++++++++++------------
 include/crypto/chacha20.h |  3 +--
 lib/chacha20.c            |  6 +++---
 4 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/crypto/chacha20_generic.c b/crypto/chacha20_generic.c
index e451c3cb6a56e..3ae96587caf9a 100644
--- a/crypto/chacha20_generic.c
+++ b/crypto/chacha20_generic.c
@@ -18,20 +18,21 @@
 static void chacha20_docrypt(u32 *state, u8 *dst, const u8 *src,
 			     unsigned int bytes)
 {
-	u32 stream[CHACHA20_BLOCK_WORDS];
+	/* aligned to potentially speed up crypto_xor() */
+	u8 stream[CHACHA20_BLOCK_SIZE] __aligned(sizeof(long));
 
 	if (dst != src)
 		memcpy(dst, src, bytes);
 
 	while (bytes >= CHACHA20_BLOCK_SIZE) {
 		chacha20_block(state, stream);
-		crypto_xor(dst, (const u8 *)stream, CHACHA20_BLOCK_SIZE);
+		crypto_xor(dst, stream, CHACHA20_BLOCK_SIZE);
 		bytes -= CHACHA20_BLOCK_SIZE;
 		dst += CHACHA20_BLOCK_SIZE;
 	}
 	if (bytes) {
 		chacha20_block(state, stream);
-		crypto_xor(dst, (const u8 *)stream, bytes);
+		crypto_xor(dst, stream, bytes);
 	}
 }
 
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 0a84b7f468ad0..86fe1df902393 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -433,9 +433,9 @@ static int crng_init_cnt = 0;
 static unsigned long crng_global_init_time = 0;
 #define CRNG_INIT_CNT_THRESH (2*CHACHA20_KEY_SIZE)
 static void _extract_crng(struct crng_state *crng,
-			  __u32 out[CHACHA20_BLOCK_WORDS]);
+			  __u8 out[CHACHA20_BLOCK_SIZE]);
 static void _crng_backtrack_protect(struct crng_state *crng,
-				    __u32 tmp[CHACHA20_BLOCK_WORDS], int used);
+				    __u8 tmp[CHACHA20_BLOCK_SIZE], int used);
 static void process_random_ready_list(void);
 static void _get_random_bytes(void *buf, int nbytes);
 
@@ -929,7 +929,7 @@ static void crng_reseed(struct crng_state *crng, struct entropy_store *r)
 	unsigned long	flags;
 	int		i, num;
 	union {
-		__u32	block[CHACHA20_BLOCK_WORDS];
+		__u8	block[CHACHA20_BLOCK_SIZE];
 		__u32	key[8];
 	} buf;
 
@@ -976,7 +976,7 @@ static void crng_reseed(struct crng_state *crng, struct entropy_store *r)
 }
 
 static void _extract_crng(struct crng_state *crng,
-			  __u32 out[CHACHA20_BLOCK_WORDS])
+			  __u8 out[CHACHA20_BLOCK_SIZE])
 {
 	unsigned long v, flags;
 
@@ -993,7 +993,7 @@ static void _extract_crng(struct crng_state *crng,
 	spin_unlock_irqrestore(&crng->lock, flags);
 }
 
-static void extract_crng(__u32 out[CHACHA20_BLOCK_WORDS])
+static void extract_crng(__u8 out[CHACHA20_BLOCK_SIZE])
 {
 	struct crng_state *crng = NULL;
 
@@ -1011,7 +1011,7 @@ static void extract_crng(__u32 out[CHACHA20_BLOCK_WORDS])
  * enough) to mutate the CRNG key to provide backtracking protection.
  */
 static void _crng_backtrack_protect(struct crng_state *crng,
-				    __u32 tmp[CHACHA20_BLOCK_WORDS], int used)
+				    __u8 tmp[CHACHA20_BLOCK_SIZE], int used)
 {
 	unsigned long	flags;
 	__u32		*s, *d;
@@ -1023,14 +1023,14 @@ static void _crng_backtrack_protect(struct crng_state *crng,
 		used = 0;
 	}
 	spin_lock_irqsave(&crng->lock, flags);
-	s = &tmp[used / sizeof(__u32)];
+	s = (__u32 *) &tmp[used];
 	d = &crng->state[4];
 	for (i=0; i < 8; i++)
 		*d++ ^= *s++;
 	spin_unlock_irqrestore(&crng->lock, flags);
 }
 
-static void crng_backtrack_protect(__u32 tmp[CHACHA20_BLOCK_WORDS], int used)
+static void crng_backtrack_protect(__u8 tmp[CHACHA20_BLOCK_SIZE], int used)
 {
 	struct crng_state *crng = NULL;
 
@@ -1046,7 +1046,7 @@ static void crng_backtrack_protect(__u32 tmp[CHACHA20_BLOCK_WORDS], int used)
 static ssize_t extract_crng_user(void __user *buf, size_t nbytes)
 {
 	ssize_t ret = 0, i = CHACHA20_BLOCK_SIZE;
-	__u32 tmp[CHACHA20_BLOCK_WORDS];
+	__u8 tmp[CHACHA20_BLOCK_SIZE] __aligned(4);
 	int large_request = (nbytes > 256);
 
 	while (nbytes) {
@@ -1625,7 +1625,7 @@ static void _warn_unseeded_randomness(const char *func_name, void *caller,
  */
 static void _get_random_bytes(void *buf, int nbytes)
 {
-	__u32 tmp[CHACHA20_BLOCK_WORDS];
+	__u8 tmp[CHACHA20_BLOCK_SIZE] __aligned(4);
 
 	trace_get_random_bytes(nbytes, _RET_IP_);
 
@@ -2251,7 +2251,7 @@ u64 get_random_u64(void)
 	batch = raw_cpu_ptr(&batched_entropy_u64);
 	spin_lock_irqsave(&batch->batch_lock, flags);
 	if (batch->position % ARRAY_SIZE(batch->entropy_u64) == 0) {
-		extract_crng((__u32 *)batch->entropy_u64);
+		extract_crng((u8 *)batch->entropy_u64);
 		batch->position = 0;
 	}
 	ret = batch->entropy_u64[batch->position++];
@@ -2278,7 +2278,7 @@ u32 get_random_u32(void)
 	batch = raw_cpu_ptr(&batched_entropy_u32);
 	spin_lock_irqsave(&batch->batch_lock, flags);
 	if (batch->position % ARRAY_SIZE(batch->entropy_u32) == 0) {
-		extract_crng(batch->entropy_u32);
+		extract_crng((u8 *)batch->entropy_u32);
 		batch->position = 0;
 	}
 	ret = batch->entropy_u32[batch->position++];
diff --git a/include/crypto/chacha20.h b/include/crypto/chacha20.h
index b83d66073db03..f76302d99e2be 100644
--- a/include/crypto/chacha20.h
+++ b/include/crypto/chacha20.h
@@ -13,13 +13,12 @@
 #define CHACHA20_IV_SIZE	16
 #define CHACHA20_KEY_SIZE	32
 #define CHACHA20_BLOCK_SIZE	64
-#define CHACHA20_BLOCK_WORDS	(CHACHA20_BLOCK_SIZE / sizeof(u32))
 
 struct chacha20_ctx {
 	u32 key[8];
 };
 
-void chacha20_block(u32 *state, u32 *stream);
+void chacha20_block(u32 *state, u8 *stream);
 void crypto_chacha20_init(u32 *state, struct chacha20_ctx *ctx, u8 *iv);
 int crypto_chacha20_setkey(struct crypto_skcipher *tfm, const u8 *key,
 			   unsigned int keysize);
diff --git a/lib/chacha20.c b/lib/chacha20.c
index c1cc50fb68c9f..d907fec6a9ed1 100644
--- a/lib/chacha20.c
+++ b/lib/chacha20.c
@@ -16,9 +16,9 @@
 #include <asm/unaligned.h>
 #include <crypto/chacha20.h>
 
-void chacha20_block(u32 *state, u32 *stream)
+void chacha20_block(u32 *state, u8 *stream)
 {
-	u32 x[16], *out = stream;
+	u32 x[16];
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(x); i++)
@@ -67,7 +67,7 @@ void chacha20_block(u32 *state, u32 *stream)
 	}
 
 	for (i = 0; i < ARRAY_SIZE(x); i++)
-		out[i] = cpu_to_le32(x[i] + state[i]);
+		put_unaligned_le32(x[i] + state[i], &stream[i * sizeof(u32)]);
 
 	state[12]++;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 071/191] cpufeature: avoid warning when compiling with clang

[Sasha Levin]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ]

The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to warnings when building the kernel with Clang:
  arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable
    'cpu_feature_match_AES' is not needed and will not be emitted
    [-Wunneeded-internal-declaration]
  module_cpu_feature_match(AES, aes_init);
  ^

Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").

Fixes: 67bad2fdb754 ("cpu: add generic support for CPU feature based module autoloading")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/cpufeature.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/cpufeature.h b/include/linux/cpufeature.h
index 986c06c88d814..84d3c81b59781 100644
--- a/include/linux/cpufeature.h
+++ b/include/linux/cpufeature.h
@@ -45,7 +45,7 @@
  * 'asm/cpufeature.h' of your favorite architecture.
  */
 #define module_cpu_feature_match(x, __initfunc)			\
-static struct cpu_feature const cpu_feature_match_ ## x[] =	\
+static struct cpu_feature const __maybe_unused cpu_feature_match_ ## x[] = \
 	{ { .feature = cpu_feature(x) }, { } };			\
 MODULE_DEVICE_TABLE(cpu, cpu_feature_match_ ## x);		\
 								\
-- 
2.20.1

[PATCH AUTOSEL 4.19 072/191] crypto: arm/crc32 - avoid warning when compiling with Clang

[Sasha Levin]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit cd560235d8f9ddd94aa51e1c4dabdf3212b9b241 ]

The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to a warning when building the kernel with Clang:
  arch/arm/crypto/crc32-ce-glue.c:239:33: warning: variable
    'crc32_cpu_feature' is not needed and will not be emitted
    [-Wunneeded-internal-declaration]
  static const struct cpu_feature crc32_cpu_feature[] = {
                                  ^

Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").

Fixes: 2a9faf8b7e43 ("crypto: arm/crc32 - enable module autoloading based on CPU feature bits")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/crypto/crc32-ce-glue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/crypto/crc32-ce-glue.c b/arch/arm/crypto/crc32-ce-glue.c
index 96e62ec105d06..cd9e93b46c2dd 100644
--- a/arch/arm/crypto/crc32-ce-glue.c
+++ b/arch/arm/crypto/crc32-ce-glue.c
@@ -236,7 +236,7 @@ static void __exit crc32_pmull_mod_exit(void)
 				  ARRAY_SIZE(crc32_pmull_algs));
 }
 
-static const struct cpu_feature crc32_cpu_feature[] = {
+static const struct cpu_feature __maybe_unused crc32_cpu_feature[] = {
 	{ cpu_feature(CRC32) }, { cpu_feature(PMULL) }, { }
 };
 MODULE_DEVICE_TABLE(cpu, crc32_cpu_feature);
-- 
2.20.1

[PATCH AUTOSEL 4.19 073/191] ARM: dts: marvell: Fix SPI and I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit cf680cc5251487b9a39919c3cda31a108af19cf8 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/dove-cubox.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-dove-db.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@14600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/orion5x-kuroboxpro.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lschl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lsgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dove-cubox.dts           | 2 +-
 arch/arm/boot/dts/dove.dtsi                | 6 +++---
 arch/arm/boot/dts/orion5x-linkstation.dtsi | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 580e3cbcfbf7c..3e1584e787aec 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -87,7 +87,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	si5351: clock-generator {
+	si5351: clock-generator@60 {
 		compatible = "silabs,si5351a-msop";
 		reg = <0x60>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 4a0a5115b2984..250ad0535e8cc 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -155,7 +155,7 @@
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			spi0: spi-ctrl@10600 {
+			spi0: spi@10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -168,7 +168,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c-ctrl@11000 {
+			i2c: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			spi1: spi-ctrl@14600 {
+			spi1: spi@14600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
index ebd93df5d07a8..b6c9b85951ea6 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -156,7 +156,7 @@
 &i2c {
 	status = "okay";
 
-	rtc {
+	rtc@32 {
 		compatible = "ricoh,rs5c372a";
 		reg = <0x32>;
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 074/191] x86/mce-inject: Reset injection struct after injection

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 7401a633c34adc7aefd3edfec60074cb0475a3e8 ]

Clear the MCE struct which is used for collecting the injection details
after injection.

Also, populate it with more details from the machine.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20180905081954.10391-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mcheck/mce-inject.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index ff1c00b695aed..1ceccc4a5472c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -106,6 +106,9 @@ static void setup_inj_struct(struct mce *m)
 	memset(m, 0, sizeof(struct mce));
 
 	m->cpuvendor = boot_cpu_data.x86_vendor;
+	m->time	     = ktime_get_real_seconds();
+	m->cpuid     = cpuid_eax(1);
+	m->microcode = boot_cpu_data.microcode;
 }
 
 /* Update fake mce registers on current CPU. */
@@ -580,6 +583,9 @@ static int inj_bank_set(void *data, u64 val)
 	m->bank = val;
 	do_inject();
 
+	/* Reset injection struct */
+	setup_inj_struct(&i_mce);
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 075/191] ARM: dts: stm32: enable display on stm32mp157c-ev1 board

[Sasha Levin]

From: Yannick Fertré <yannick.fertre@st.com>

[ Upstream commit 67330599f93672bd351123c729e2591a460fd24c ]

Enable panel raydium RM68200, DSI bridge & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 73 ++++++++++++++++++++++++---
 1 file changed, 67 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 372bc2ea6b921..063ee8ac5dcbd 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -19,6 +20,58 @@
 		serial0 = &uart4;
 		ethernet0 = &ethernet0;
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &ethernet0 {
@@ -40,12 +93,6 @@
 	};
 };
 
-&cec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cec_pins_a>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -62,6 +109,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &m_can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&m_can1_pins_a>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 076/191] ARM: dts: clearfog: fix sdhci supply property name

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit e807f0298144c06740022a2f900d86b7f115595e ]

The vmmc phandle, like all power supply property names, must have the
'-supply' suffix.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/armada-388-clearfog.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 7c6ad2afb0947..1b0d0680c8b62 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -48,7 +48,7 @@
 					     &clearfog_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
-				vmmc = <&reg_3p3v>;
+				vmmc-supply = <&reg_3p3v>;
 				wp-inverted;
 			};
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 077/191] ARM: dts: stm32: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 1ba23b1df0bb6eec430408614c3a11280941e112 ]

SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 185541a5b69fb..c50c36baba758 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -947,7 +947,7 @@
 			dma-requests = <48>;
 		};
 
-		qspi: qspi@58003000 {
+		qspi: spi@58003000 {
 			compatible = "st,stm32f469-qspi";
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
-- 
2.20.1

[PATCH AUTOSEL 4.19 078/191] bnx2x: Ignore bandwidth attention in single function mode

[Sasha Levin]

From: Shahed Shaikh <Shahed.Shaikh@cavium.com>

[ Upstream commit 75a110a1783ef8324ffd763b24f4ac268253cbca ]

This is a workaround for FW bug -
MFW generates bandwidth attention in single function mode, which
is only expected to be generated in multi function mode.
This undesired attention in SF mode results in incorrect HW
configuration and resulting into Tx timeout.

Signed-off-by: Shahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 68c62e32e8820..af57568c922eb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3540,6 +3540,16 @@ static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp)
  */
 static void bnx2x_config_mf_bw(struct bnx2x *bp)
 {
+	/* Workaround for MFW bug.
+	 * MFW is not supposed to generate BW attention in
+	 * single function mode.
+	 */
+	if (!IS_MF(bp)) {
+		DP(BNX2X_MSG_MCP,
+		   "Ignoring MF BW config in single function mode\n");
+		return;
+	}
+
 	if (bp->link_vars.link_up) {
 		bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
 		bnx2x_link_sync_notify(bp);
-- 
2.20.1

[PATCH AUTOSEL 4.19 079/191] PCI/AER: Take reference on error devices

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit 60271ab044a53edb9dcbe76bebea2221c4ff04d9 ]

Error handling may be running in parallel with a hot removal.  Reference
count the device during AER handling so the device can not be freed while
AER wants to reference it.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 637d638f73da5..ffbbd759683c5 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -866,7 +866,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
 static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
 {
 	if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
-		e_info->dev[e_info->error_dev_num] = dev;
+		e_info->dev[e_info->error_dev_num] = pci_dev_get(dev);
 		e_info->error_dev_num++;
 		return 0;
 	}
@@ -1013,6 +1013,7 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
 		pcie_do_nonfatal_recovery(dev);
 	else if (info->severity == AER_FATAL)
 		pcie_do_fatal_recovery(dev, PCIE_PORT_SERVICE_AER);
+	pci_dev_put(dev);
 }
 
 #ifdef CONFIG_ACPI_APEI_PCIEAER
-- 
2.20.1

[PATCH AUTOSEL 4.19 080/191] PCI/AER: Don't read upstream ports below fatal errors

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit 9d938ea53b265ed6df6cdd1715d971f0235fdbfc ]

The AER driver has never read the config space of an endpoint that reported
a fatal error because the link to that device is considered unreliable.

An ERR_FATAL from an upstream port almost certainly indicates an error on
its upstream link, so we can't expect to reliably read its config space for
the same reason.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aer.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index ffbbd759683c5..5c3ea7254c6ae 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1116,8 +1116,9 @@ int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
 			&info->mask);
 		if (!(info->status & ~info->mask))
 			return 0;
-	} else if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-		info->severity == AER_NONFATAL) {
+	} else if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	           pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
+		   info->severity == AER_NONFATAL) {
 
 		/* Link is still healthy for IO reads */
 		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-- 
2.20.1

[PATCH AUTOSEL 4.19 081/191] PCI/ERR: Use slot reset if available

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit c4eed62a214330908eec11b0dc170d34fa50b412 ]

The secondary bus reset may have link side effects that a hotplug capable
port may incorrectly react to.  Use the slot specific reset for hotplug
ports, fixing the undesirable link down-up handling during error
recovering.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: fold in
https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com
for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c      | 37 +++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h      |  2 ++
 drivers/pci/pcie/aer.c |  2 +-
 drivers/pci/pcie/err.c |  2 +-
 drivers/pci/slot.c     |  1 -
 5 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 2baf1f82f8933..c9f51fc24563c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -35,6 +35,8 @@
 #include <linux/aer.h>
 #include "pci.h"
 
+DEFINE_MUTEX(pci_slot_mutex);
+
 const char *pci_power_names[] = {
 	"error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
 };
@@ -5191,6 +5193,41 @@ static int pci_bus_reset(struct pci_bus *bus, int probe)
 	return ret;
 }
 
+/**
+ * pci_bus_error_reset - reset the bridge's subordinate bus
+ * @bridge: The parent device that connects to the bus to reset
+ *
+ * This function will first try to reset the slots on this bus if the method is
+ * available. If slot reset fails or is not available, this will fall back to a
+ * secondary bus reset.
+ */
+int pci_bus_error_reset(struct pci_dev *bridge)
+{
+	struct pci_bus *bus = bridge->subordinate;
+	struct pci_slot *slot;
+
+	if (!bus)
+		return -ENOTTY;
+
+	mutex_lock(&pci_slot_mutex);
+	if (list_empty(&bus->slots))
+		goto bus_reset;
+
+	list_for_each_entry(slot, &bus->slots, list)
+		if (pci_probe_reset_slot(slot))
+			goto bus_reset;
+
+	list_for_each_entry(slot, &bus->slots, list)
+		if (pci_slot_reset(slot, 0))
+			goto bus_reset;
+
+	mutex_unlock(&pci_slot_mutex);
+	return 0;
+bus_reset:
+	mutex_unlock(&pci_slot_mutex);
+	return pci_bus_reset(bridge->subordinate, 0);
+}
+
 /**
  * pci_probe_reset_bus - probe whether a PCI bus can be reset
  * @bus: PCI bus to probe
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index ab25752f00d96..e9ede82ee2c25 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,6 +35,7 @@ int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vmai,
 
 int pci_probe_reset_function(struct pci_dev *dev);
 int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
+int pci_bus_error_reset(struct pci_dev *dev);
 
 /**
  * struct pci_platform_pm_ops - Firmware PM callbacks
@@ -136,6 +137,7 @@ static inline void pci_remove_legacy_files(struct pci_bus *bus) { return; }
 
 /* Lock for read/write access to pci device and bus lists */
 extern struct rw_semaphore pci_bus_sem;
+extern struct mutex pci_slot_mutex;
 
 extern raw_spinlock_t pci_lock;
 
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 5c3ea7254c6ae..1563e22600eca 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1528,7 +1528,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
 	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
 
-	rc = pci_bridge_secondary_bus_reset(dev);
+	rc = pci_bus_error_reset(dev);
 	pci_printk(KERN_DEBUG, dev, "Root Port link has been reset\n");
 
 	/* Clear Root Error Status */
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 708fd3a0d6466..12c1205e1d804 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -177,7 +177,7 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 {
 	int rc;
 
-	rc = pci_bridge_secondary_bus_reset(dev);
+	rc = pci_bus_error_reset(dev);
 	pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
 	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
 }
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index e634229ece895..a32897f83ee51 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -14,7 +14,6 @@
 
 struct kset *pci_slots_kset;
 EXPORT_SYMBOL_GPL(pci_slots_kset);
-static DEFINE_MUTEX(pci_slot_mutex);
 
 static ssize_t pci_slot_attr_show(struct kobject *kobj,
 					struct attribute *attr, char *buf)
-- 
2.20.1

[PATCH AUTOSEL 4.19 082/191] samples/bpf: fix compilation failure

[Sasha Levin]

From: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>

[ Upstream commit 32c009798385ce21080beaa87a9b95faad3acd1e ]

following commit:
commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
added struct bpf_flow_keys which conflicts with the struct with
same name in sockex2_kern.c and sockex3_kern.c

similar to commit:
commit 534e0e52bc23 ("samples/bpf: fix a compilation failure")
we tried the rename it "flow_keys" but it also conflicted with struct
having same name in include/net/flow_dissector.h. Hence renaming the
struct to "flow_key_record". Also, this commit doesn't fix the
compilation error completely because the similar struct is present in
sockex3_kern.c. Hence renaming it in both files sockex3_user.c and
sockex3_kern.c

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/sockex2_kern.c | 11 ++++++-----
 samples/bpf/sockex3_kern.c |  8 ++++----
 samples/bpf/sockex3_user.c |  4 ++--
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/samples/bpf/sockex2_kern.c b/samples/bpf/sockex2_kern.c
index f58acfc925561..f2f9dbc021b0d 100644
--- a/samples/bpf/sockex2_kern.c
+++ b/samples/bpf/sockex2_kern.c
@@ -14,7 +14,7 @@ struct vlan_hdr {
 	__be16 h_vlan_encapsulated_proto;
 };
 
-struct bpf_flow_keys {
+struct flow_key_record {
 	__be32 src;
 	__be32 dst;
 	union {
@@ -59,7 +59,7 @@ static inline __u32 ipv6_addr_hash(struct __sk_buff *ctx, __u64 off)
 }
 
 static inline __u64 parse_ip(struct __sk_buff *skb, __u64 nhoff, __u64 *ip_proto,
-			     struct bpf_flow_keys *flow)
+			     struct flow_key_record *flow)
 {
 	__u64 verlen;
 
@@ -83,7 +83,7 @@ static inline __u64 parse_ip(struct __sk_buff *skb, __u64 nhoff, __u64 *ip_proto
 }
 
 static inline __u64 parse_ipv6(struct __sk_buff *skb, __u64 nhoff, __u64 *ip_proto,
-			       struct bpf_flow_keys *flow)
+			       struct flow_key_record *flow)
 {
 	*ip_proto = load_byte(skb,
 			      nhoff + offsetof(struct ipv6hdr, nexthdr));
@@ -96,7 +96,8 @@ static inline __u64 parse_ipv6(struct __sk_buff *skb, __u64 nhoff, __u64 *ip_pro
 	return nhoff;
 }
 
-static inline bool flow_dissector(struct __sk_buff *skb, struct bpf_flow_keys *flow)
+static inline bool flow_dissector(struct __sk_buff *skb,
+				  struct flow_key_record *flow)
 {
 	__u64 nhoff = ETH_HLEN;
 	__u64 ip_proto;
@@ -198,7 +199,7 @@ struct bpf_map_def SEC("maps") hash_map = {
 SEC("socket2")
 int bpf_prog2(struct __sk_buff *skb)
 {
-	struct bpf_flow_keys flow = {};
+	struct flow_key_record flow = {};
 	struct pair *value;
 	u32 key;
 
diff --git a/samples/bpf/sockex3_kern.c b/samples/bpf/sockex3_kern.c
index 95907f8d2b17d..c527b57d3ec8a 100644
--- a/samples/bpf/sockex3_kern.c
+++ b/samples/bpf/sockex3_kern.c
@@ -61,7 +61,7 @@ struct vlan_hdr {
 	__be16 h_vlan_encapsulated_proto;
 };
 
-struct bpf_flow_keys {
+struct flow_key_record {
 	__be32 src;
 	__be32 dst;
 	union {
@@ -88,7 +88,7 @@ static inline __u32 ipv6_addr_hash(struct __sk_buff *ctx, __u64 off)
 }
 
 struct globals {
-	struct bpf_flow_keys flow;
+	struct flow_key_record flow;
 };
 
 struct bpf_map_def SEC("maps") percpu_map = {
@@ -114,14 +114,14 @@ struct pair {
 
 struct bpf_map_def SEC("maps") hash_map = {
 	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(struct bpf_flow_keys),
+	.key_size = sizeof(struct flow_key_record),
 	.value_size = sizeof(struct pair),
 	.max_entries = 1024,
 };
 
 static void update_stats(struct __sk_buff *skb, struct globals *g)
 {
-	struct bpf_flow_keys key = g->flow;
+	struct flow_key_record key = g->flow;
 	struct pair *value;
 
 	value = bpf_map_lookup_elem(&hash_map, &key);
diff --git a/samples/bpf/sockex3_user.c b/samples/bpf/sockex3_user.c
index 22f74d0e14934..9d02e0404719a 100644
--- a/samples/bpf/sockex3_user.c
+++ b/samples/bpf/sockex3_user.c
@@ -13,7 +13,7 @@
 #define PARSE_IP_PROG_FD (prog_fd[0])
 #define PROG_ARRAY_FD (map_fd[0])
 
-struct flow_keys {
+struct flow_key_record {
 	__be32 src;
 	__be32 dst;
 	union {
@@ -64,7 +64,7 @@ int main(int argc, char **argv)
 	(void) f;
 
 	for (i = 0; i < 5; i++) {
-		struct flow_keys key = {}, next_key;
+		struct flow_key_record key = {}, next_key;
 		struct pair value;
 
 		sleep(1);
-- 
2.20.1

[PATCH AUTOSEL 4.19 083/191] net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit b78ac6ecd1b6b46f8767cbafa95a7b0b51b87ad8 ]

Allow the configuration of the MDIO clock divider when the Device Tree
contains 'clock-frequency' property (similar to I2C and SPI buses).
Because the hardware may have lost its state during suspend/resume,
re-apply the MDIO clock divider upon resumption.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../bindings/net/brcm,unimac-mdio.txt         |  3 +
 drivers/net/phy/mdio-bcm-unimac.c             | 83 ++++++++++++++++++-
 2 files changed, 84 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
index 4648948f7c3b8..e15589f477876 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
@@ -19,6 +19,9 @@ Optional properties:
 - interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
   to this hardware block, or must be "mdio_done" for the first interrupt and
   "mdio_error" for the second when there are separate interrupts
+- clocks: A reference to the clock supplying the MDIO bus controller
+- clock-frequency: the MDIO bus clock that must be output by the MDIO bus
+  hardware, if absent, the default hardware values are used
 
 Child nodes of this MDIO bus controller node are standard Ethernet PHY device
 nodes as described in Documentation/devicetree/bindings/net/phy.txt
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 8d370667fa1b3..80b9583eaa952 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -45,6 +46,8 @@ struct unimac_mdio_priv {
 	void __iomem		*base;
 	int (*wait_func)	(void *wait_func_data);
 	void			*wait_func_data;
+	struct clk		*clk;
+	u32			clk_freq;
 };
 
 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset)
@@ -189,6 +192,35 @@ static int unimac_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
+static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
+{
+	unsigned long rate;
+	u32 reg, div;
+
+	/* Keep the hardware default values */
+	if (!priv->clk_freq)
+		return;
+
+	if (!priv->clk)
+		rate = 250000000;
+	else
+		rate = clk_get_rate(priv->clk);
+
+	div = (rate / (2 * priv->clk_freq)) - 1;
+	if (div & ~MDIO_CLK_DIV_MASK) {
+		pr_warn("Incorrect MDIO clock frequency, ignoring\n");
+		return;
+	}
+
+	/* The MDIO clock is the reference clock (typicaly 250Mhz) divided by
+	 * 2 x (MDIO_CLK_DIV + 1)
+	 */
+	reg = unimac_mdio_readl(priv, MDIO_CFG);
+	reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT);
+	reg |= div << MDIO_CLK_DIV_SHIFT;
+	unimac_mdio_writel(priv, reg, MDIO_CFG);
+}
+
 static int unimac_mdio_probe(struct platform_device *pdev)
 {
 	struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;
@@ -217,9 +249,26 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
+		return PTR_ERR(priv->clk);
+	else
+		priv->clk = NULL;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
+		priv->clk_freq = 0;
+
+	unimac_mdio_clk_set(priv);
+
 	priv->mii_bus = mdiobus_alloc();
-	if (!priv->mii_bus)
-		return -ENOMEM;
+	if (!priv->mii_bus) {
+		ret = -ENOMEM;
+		goto out_clk_disable;
+	}
 
 	bus = priv->mii_bus;
 	bus->priv = priv;
@@ -253,6 +302,8 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 
 out_mdio_free:
 	mdiobus_free(bus);
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
@@ -262,10 +313,37 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(priv->mii_bus);
 	mdiobus_free(priv->mii_bus);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int unimac_mdio_suspend(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int unimac_mdio_resume(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	unimac_mdio_clk_set(priv);
 
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops,
+			 unimac_mdio_suspend, unimac_mdio_resume);
+
 static const struct of_device_id unimac_mdio_ids[] = {
 	{ .compatible = "brcm,genet-mdio-v5", },
 	{ .compatible = "brcm,genet-mdio-v4", },
@@ -281,6 +359,7 @@ static struct platform_driver unimac_mdio_driver = {
 	.driver = {
 		.name = UNIMAC_MDIO_DRV_NAME,
 		.of_match_table = unimac_mdio_ids,
+		.pm = &unimac_mdio_pm_ops,
 	},
 	.probe	= unimac_mdio_probe,
 	.remove	= unimac_mdio_remove,
-- 
2.20.1

[PATCH AUTOSEL 4.19 084/191] net: micrel: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 2b49117a5abee8478b0470cba46ac74f93b4a479 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8695net.c  | 2 +-
 drivers/net/ethernet/micrel/ks8851_mll.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
index bd51e057e9150..b881f5d4a7f9e 100644
--- a/drivers/net/ethernet/micrel/ks8695net.c
+++ b/drivers/net/ethernet/micrel/ks8695net.c
@@ -1164,7 +1164,7 @@ ks8695_timeout(struct net_device *ndev)
  *	sk_buff and adds it to the TX ring. It then kicks the TX DMA
  *	engine to ensure transmission begins.
  */
-static int
+static netdev_tx_t
 ks8695_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct ks8695_priv *ksp = netdev_priv(ndev);
diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 0e9719fbc6243..35f8c9ef204d9 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -1021,9 +1021,9 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
  * spin_lock_irqsave is required because tx and rx should be mutual exclusive.
  * So while tx is in-progress, prevent IRQ interrupt from happenning.
  */
-static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
-	int retv = NETDEV_TX_OK;
+	netdev_tx_t retv = NETDEV_TX_OK;
 	struct ks_net *ks = netdev_priv(netdev);
 
 	disable_irq(netdev->irq);
-- 
2.20.1

[PATCH AUTOSEL 4.19 085/191] net: freescale: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 06983aa526c759ebdf43f202d8d0491d9494e2f4 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c        | 3 ++-
 drivers/net/ethernet/freescale/fec_mpc52xx.c          | 3 ++-
 drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c | 3 ++-
 drivers/net/ethernet/freescale/gianfar.c              | 4 ++--
 drivers/net/ethernet/freescale/ucc_geth.c             | 3 ++-
 5 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index d7915cd68dc14..462bb8c4f80c9 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2046,7 +2046,8 @@ static inline int dpaa_xmit(struct dpaa_priv *priv,
 	return 0;
 }
 
-static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+static netdev_tx_t
+dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 {
 	const int queue_mapping = skb_get_queue_mapping(skb);
 	bool nonlinear = skb_is_nonlinear(skb);
diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
index 6d7269d87a850..b90bab72efdb3 100644
--- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
@@ -305,7 +305,8 @@ static int mpc52xx_fec_close(struct net_device *dev)
  * invariant will hold if you make sure that the netif_*_queue()
  * calls are done at the proper times.
  */
-static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	struct bcom_fec_bd *bd;
diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
index 2c2976a2dda6b..7c548ed535da5 100644
--- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
@@ -481,7 +481,8 @@ static struct sk_buff *tx_skb_align_workaround(struct net_device *dev,
 }
 #endif
 
-static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
 	cbd_t __iomem *bdp;
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index f27f9bae1a4ac..c97c4edfa31bc 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -112,7 +112,7 @@
 const char gfar_driver_version[] = "2.0";
 
 static int gfar_enet_open(struct net_device *dev);
-static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static void gfar_reset_task(struct work_struct *work);
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
@@ -2334,7 +2334,7 @@ static inline bool gfar_csum_errata_76(struct gfar_private *priv,
 /* This is called by the kernel when a frame is ready for transmission.
  * It is pointed to by the dev->hard_start_xmit function pointer
  */
-static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar_priv_tx_q *tx_queue = NULL;
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 1e2b53a934fb9..a5bf02ae4bc5c 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3085,7 +3085,8 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
 
 /* This is called by the kernel when a frame is ready for transmission. */
 /* It is pointed to by the dev->hard_start_xmit function pointer */
-static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ucc_geth_private *ugeth = netdev_priv(dev);
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-- 
2.20.1

[PATCH AUTOSEL 4.19 086/191] x86/CPU: Use correct macros for Cyrix calls

[Sasha Levin]

From: Matthew Whitehead <tedheadster@gmail.com>

[ Upstream commit 03b099bdcdf7125d4a63dc9ddeefdd454e05123d ]

There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:

  setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);

This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:

  outb(CX86_CCR2, 0x22);
  inb(0x23);

From the comments:

 * When using the old macros a line like
 *   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
 * gets expanded to:
 *  do {
 *    outb((CX86_CCR2), 0x22);
 *    outb((({
 *        outb((CX86_CCR2), 0x22);
 *        inb(0x23);
 *    }) | 0x88), 0x23);
 *  } while (0);

The new macros fix this problem, so use them instead.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jia Zhang <qianyue.zj@alibaba-inc.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180921212041.13096-2-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/cyrix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index fa61c870ada94..1d9b8aaea06c8 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -437,7 +437,7 @@ static void cyrix_identify(struct cpuinfo_x86 *c)
 			/* enable MAPEN  */
 			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
 			/* enable cpuid  */
-			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+			setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80);
 			/* disable MAPEN */
 			setCx86(CX86_CCR3, ccr3);
 			local_irq_restore(flags);
-- 
2.20.1

[PATCH AUTOSEL 4.19 087/191] x86/CPU: Change query logic so CPUID is enabled before testing

[Sasha Levin]

From: Matthew Whitehead <tedheadster@gmail.com>

[ Upstream commit 2893cc8ff892fa74972d8dc0e1d0dc65116daaa3 ]

Presently we check first if CPUID is enabled. If it is not already
enabled, then we next call identify_cpu_without_cpuid() and clear
X86_FEATURE_CPUID.

Unfortunately, identify_cpu_without_cpuid() is the function where CPUID
becomes _enabled_ on Cyrix 6x86/6x86L CPUs.

Reverse the calling sequence so that CPUID is first enabled, and then
check a second time to see if the feature has now been activated.

[ bp: Massage commit message and remove trailing whitespace. ]

Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180921212041.13096-3-tedheadster@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/common.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b33fdfa0ff49e..04622625f8e22 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1104,6 +1104,9 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 	c->extended_cpuid_level = 0;
 
+	if (!have_cpuid_p())
+		identify_cpu_without_cpuid(c);
+
 	/* cyrix could have cpuid enabled via c_identify()*/
 	if (have_cpuid_p()) {
 		cpu_detect(c);
@@ -1121,7 +1124,6 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 		if (this_cpu->c_bsp_init)
 			this_cpu->c_bsp_init(c);
 	} else {
-		identify_cpu_without_cpuid(c);
 		setup_clear_cpu_cap(X86_FEATURE_CPUID);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 088/191] EDAC: Correct DIMM capacity unit symbol

[Sasha Levin]

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

[ Upstream commit 6f6da136046294a1e8d2944336eb97412751f653 ]

The {i3200|i7core|sb|skx}_edac drivers show DIMM capacity using the
wrong unit symbol: 'Mb' - megabit. Fix them by replacing 'Mb' with
'MiB' - mebibyte.

[Tony: These are all "edac_dbg()" messages, so this won't break scripts
       that parse console logs.]

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180919003433.16475-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/i3200_edac.c  | 2 +-
 drivers/edac/i7core_edac.c | 2 +-
 drivers/edac/sb_edac.c     | 2 +-
 drivers/edac/skx_edac.c    | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c
index d92d56cee1017..299b441647cd5 100644
--- a/drivers/edac/i3200_edac.c
+++ b/drivers/edac/i3200_edac.c
@@ -399,7 +399,7 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx)
 			if (nr_pages == 0)
 				continue;
 
-			edac_dbg(0, "csrow %d, channel %d%s, size = %ld Mb\n", i, j,
+			edac_dbg(0, "csrow %d, channel %d%s, size = %ld MiB\n", i, j,
 				 stacked ? " (stacked)" : "", PAGES_TO_MiB(nr_pages));
 
 			dimm->nr_pages = nr_pages;
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index f1d19504a0281..4a3300c2da333 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -597,7 +597,7 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 			/* DDR3 has 8 I/O banks */
 			size = (rows * cols * banks * ranks) >> (20 - 3);
 
-			edac_dbg(0, "\tdimm %d %d Mb offset: %x, bank: %d, rank: %d, row: %#x, col: %#x\n",
+			edac_dbg(0, "\tdimm %d %d MiB offset: %x, bank: %d, rank: %d, row: %#x, col: %#x\n",
 				 j, size,
 				 RANKOFFSET(dimm_dod[j]),
 				 banks, ranks, rows, cols);
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 72cea3cb86224..acb9db55f5700 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -1622,7 +1622,7 @@ static int __populate_dimms(struct mem_ctl_info *mci,
 				size = ((u64)rows * cols * banks * ranks) >> (20 - 3);
 				npages = MiB_TO_PAGES(size);
 
-				edac_dbg(0, "mc#%d: ha %d channel %d, dimm %d, %lld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+				edac_dbg(0, "mc#%d: ha %d channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
 					 pvt->sbridge_dev->mc, pvt->sbridge_dev->dom, i, j,
 					 size, npages,
 					 banks, ranks, rows, cols);
diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
index 4ba92f1dd0f74..dd209e0dd9abb 100644
--- a/drivers/edac/skx_edac.c
+++ b/drivers/edac/skx_edac.c
@@ -364,7 +364,7 @@ static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
 	size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
 	npages = MiB_TO_PAGES(size);
 
-	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
 		 imc->mc, chan, dimmno, size, npages,
 		 banks, 1 << ranks, rows, cols);
 
@@ -424,7 +424,7 @@ static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
 	dimm->mtype = MEM_NVDIMM;
 	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
 
-	edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu Mb (%u pages)\n",
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n",
 		 imc->mc, chan, dimmno, size >> 20, dimm->nr_pages);
 
 	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
-- 
2.20.1

[PATCH AUTOSEL 4.19 089/191] MIPS: kexec: Relax memory restriction

[Sasha Levin]

From: Dengcheng Zhu <dzhu@wavecomp.com>

[ Upstream commit a6da4d6fdf8bd512c98d3ac7f1d16bc4bb282919 ]

We can rely on the system kernel and the dump capture kernel themselves in
memory usage.

Being restrictive with 512MB limit may cause kexec tool failure on some
platforms.

Tested-by: Rachel Mozes <rachel.mozes@intel.com>
Reported-by: Rachel Mozes <rachel.mozes@intel.com>
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20568/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/kexec.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h
index 493a3cc7c39ad..cfdbe66575f4d 100644
--- a/arch/mips/include/asm/kexec.h
+++ b/arch/mips/include/asm/kexec.h
@@ -12,11 +12,11 @@
 #include <asm/stacktrace.h>
 
 /* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
 /* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
  /* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
 /* Reserve 3*4096 bytes for board-specific info */
 #define KEXEC_CONTROL_PAGE_SIZE (4096 + 3*4096)
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 090/191] arm64: dts: rockchip: Fix microSD in rk3399 sapphire board

[Sasha Levin]

From: Vicente Bergas <vicencb@gmail.com>

[ Upstream commit 88a20edf76091ee7f1bb459b89d714d53f0f8940 ]

The microSD card slot in the Sapphire board is not working because of
several issues:
 1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V
 and has a GPIO-based enable control.
 2.- The vqmmc power supply can provide up to 3.3V, but it is capped in
 the DTS to just 3.0V because of the vmmc capability. This results in a
 conflict from the mmc driver requesting an unsupportable voltage range
 from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the
 range up to 3.3V. The hw should be able to stand this 0.3V tolerance.
 See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c.
 3.- The card detect signal is non-working. There is a known conflict
 with jtag, but the workaround in drivers/soc/rockchip/grf.c does not
 work. Adding the broken-cd attribute to the DTS fixes the issue.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/rockchip/rk3399-sapphire.dtsi    | 24 ++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 36b60791c156d..780e5e298d8bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -93,6 +93,19 @@
 		vin-supply = <&vcc_1v8>;
 	};
 
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -310,7 +323,7 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3000000>;
@@ -469,6 +482,13 @@
 		};
 	};
 
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb2 {
 		vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins =
@@ -499,6 +519,7 @@
 };
 
 &sdmmc {
+	broken-cd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -507,6 +528,7 @@
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
 	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 091/191] mlxsw: Make MLXSW_SP1_FWREV_MINOR a hard requirement

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 12ba7e1045521ec9f251c93ae0a6735cc3f42337 ]

Up until now, mlxsw tolerated firmware versions that weren't exactly
matching the required version, if the branch number matched. That
allowed the users to test various firmware versions as long as they were
on the right branch.

On the other hand, it made it impossible for mlxsw to put a hard lower
bound on a version that fixes all problems known to date. If a user had
a somewhat older FW version installed, mlxsw would start up just fine,
possibly performing non-optimally as it would use features that trigger
problematic behavior.

Therefore tweak the check to accept any FW version that is:

- on the same branch as the preferred version, and
- the same as or newer than the preferred version.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 1c170a0fd2cc9..e498ee95bacab 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -336,7 +336,10 @@ static int mlxsw_sp_fw_rev_validate(struct mlxsw_sp *mlxsw_sp)
 		return -EINVAL;
 	}
 	if (MLXSW_SP_FWREV_MINOR_TO_BRANCH(rev->minor) ==
-	    MLXSW_SP_FWREV_MINOR_TO_BRANCH(req_rev->minor))
+	    MLXSW_SP_FWREV_MINOR_TO_BRANCH(req_rev->minor) &&
+	    (rev->minor > req_rev->minor ||
+	     (rev->minor == req_rev->minor &&
+	      rev->subminor >= req_rev->subminor)))
 		return 0;
 
 	dev_info(mlxsw_sp->bus_info->dev, "The firmware version %d.%d.%d is incompatible with the driver\n",
-- 
2.20.1

[PATCH AUTOSEL 4.19 092/191] media: imx: work around false-positive warning, again

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 8d1a4817cce1b15b4909f0e324a4f5af5952da67 ]

A warning that I thought to be solved by a previous patch of mine
has resurfaced with gcc-8:

media/imx/imx-media-csi.c: In function 'csi_link_validate':
media/imx/imx-media-csi.c:1025:20: error: 'upstream_ep' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c:1026:24: error: 'upstream_ep.bus_type' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c:127:19: error: 'upstream_ep.bus.parallel.bus_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c: In function 'csi_enum_mbus_code':
media/imx/imx-media-csi.c:132:9: error: '*((void *)&upstream_ep+12)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
media/imx/imx-media-csi.c:132:48: error: 'upstream_ep.bus.parallel.bus_width' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I spent some more time digging in this time, and think I have a better
fix, bailing out of the function that either initializes or errors
out here, which simplifies the code enough for gcc to figure out
what is going on. The earlier partial workaround can be removed now,
as the new workaround is better.

Fixes: 890f27693f2a ("media: imx: work around false-positive warning")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx-media-csi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index d17ce1fb4ef51..0f8fdc347091b 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -166,6 +166,9 @@ static int csi_get_upstream_endpoint(struct csi_priv *priv,
 	struct v4l2_subdev *sd;
 	struct media_pad *pad;
 
+	if (!IS_ENABLED(CONFIG_OF))
+		return -ENXIO;
+
 	if (!priv->src_sd)
 		return -EPIPE;
 
@@ -1072,7 +1075,7 @@ static int csi_link_validate(struct v4l2_subdev *sd,
 			     struct v4l2_subdev_format *sink_fmt)
 {
 	struct csi_priv *priv = v4l2_get_subdevdata(sd);
-	struct v4l2_fwnode_endpoint upstream_ep = {};
+	struct v4l2_fwnode_endpoint upstream_ep;
 	bool is_csi2;
 	int ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 093/191] media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 8d11eb847de7d89c2754988c944d51a4f63e219b ]

The driver may sleep in a interrupt handler.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] kzalloc(GFP_KERNEL)
drivers/media/pci/ivtv/ivtv-yuv.c, 938:
	kzalloc in ivtv_yuv_init
drivers/media/pci/ivtv/ivtv-yuv.c, 960:
	ivtv_yuv_init in ivtv_yuv_next_free
drivers/media/pci/ivtv/ivtv-yuv.c, 1126:
	ivtv_yuv_next_free in ivtv_yuv_setup_stream_frame
drivers/media/pci/ivtv/ivtv-irq.c, 827:
	ivtv_yuv_setup_stream_frame in ivtv_irq_dec_data_req
drivers/media/pci/ivtv/ivtv-irq.c, 1013:
	ivtv_irq_dec_data_req in ivtv_irq_handler

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index 44936d6d7c396..1380474519f2b 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -935,7 +935,7 @@ static void ivtv_yuv_init(struct ivtv *itv)
 	}
 
 	/* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */
-	yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL|__GFP_NOWARN);
+	yi->blanking_ptr = kzalloc(720 * 16, GFP_ATOMIC|__GFP_NOWARN);
 	if (yi->blanking_ptr) {
 		yi->blanking_dmaptr = pci_map_single(itv->pdev, yi->blanking_ptr, 720*16, PCI_DMA_TODEVICE);
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 4.19 094/191] media: au0828: Fix incorrect error messages

[Sasha Levin]

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit f347596f2bf114a3af3d80201c6e6bef538d884f ]

Correcting red herring error messages.

Where appropriate, replaces au0282_dev_register with:
- au0828_analog_register
- au0828_dvb_register

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/au0828/au0828-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c
index e3f63299f85c0..07e3322bb1827 100644
--- a/drivers/media/usb/au0828/au0828-core.c
+++ b/drivers/media/usb/au0828/au0828-core.c
@@ -632,7 +632,7 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	/* Analog TV */
 	retval = au0828_analog_register(dev, interface);
 	if (retval) {
-		pr_err("%s() au0282_dev_register failed to register on V4L2\n",
+		pr_err("%s() au0828_analog_register failed to register on V4L2\n",
 			__func__);
 		mutex_unlock(&dev->lock);
 		goto done;
@@ -641,7 +641,7 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	/* Digital TV */
 	retval = au0828_dvb_register(dev);
 	if (retval)
-		pr_err("%s() au0282_dev_register failed\n",
+		pr_err("%s() au0828_dvb_register failed\n",
 		       __func__);
 
 	/* Remote controller */
-- 
2.20.1

[PATCH AUTOSEL 4.19 095/191] media: davinci: Fix implicit enum conversion warning

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 4158757395b300b6eb308fc20b96d1d231484413 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/media/platform/davinci/vpbe_display.c:524:24: warning: implicit
conversion from enumeration type 'enum osd_v_exp_ratio' to different
enumeration type 'enum osd_h_exp_ratio' [-Wenum-conversion]
                        layer_info->h_exp = V_EXP_6_OVER_5;
                                          ~ ^~~~~~~~~~~~~~
1 warning generated.

This appears to be a copy and paste error judging from the couple of
lines directly above this statement and the way that height is handled
in the if block above this one.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/vpbe_display.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c
index b0eb3d899eb44..6f82693524331 100644
--- a/drivers/media/platform/davinci/vpbe_display.c
+++ b/drivers/media/platform/davinci/vpbe_display.c
@@ -521,7 +521,7 @@ vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
 		else if (v_scale == 4)
 			layer_info->v_zoom = ZOOM_X4;
 		if (v_exp)
-			layer_info->h_exp = V_EXP_6_OVER_5;
+			layer_info->v_exp = V_EXP_6_OVER_5;
 	} else {
 		/* no scaling, only cropping. Set display area to crop area */
 		cfg->ysize = expected_ysize;
-- 
2.20.1

[PATCH AUTOSEL 4.19 096/191] ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock

[Sasha Levin]

From: Heiko Stuebner <heiko@sntech.de>

[ Upstream commit a2df0984e73fd9e1dad5fc3f1c307ec3de395e30 ]

It is good practice to make the setting of gpio-pinctrls explicitly in the
devicetree, and in this case even necessary.
Rockchip boards start with iomux settings set to gpio for most pins and
while the linux pinctrl driver also implicitly sets the gpio function if
a pin is requested as gpio that is not necessarily true for other drivers.

The issue in question stems from uboot, where the sdmmc_pwr pin is set
to function 1 (sdmmc-power) by the bootrom when reading the 1st-stage
loader. The regulator controlled by the pin is active-low though, so
when the dwmmc hw-block sets its enabled bit, it actually disables the
regulator. By changing the pin back to gpio we fix that behaviour.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 45fd2b302dda1..4a2890618f6fc 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -93,6 +93,8 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
 		startup-delay-us = <100000>;
 		vin-supply = <&vcc_io>;
 	};
@@ -315,6 +317,12 @@
 		};
 	};
 
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 097/191] usb: gadget: uvc: configfs: Drop leaked references to config items

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 86f3daed59bceb4fa7981d85e89f63ebbae1d561 ]

Some of the .allow_link() and .drop_link() operations implementations
call config_group_find_item() and then leak the reference to the
returned item. Fix this by dropping those references where needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_configfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index b51f0d2788269..dc4edba95a478 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -544,6 +544,7 @@ static int uvcg_control_class_allow_link(struct config_item *src,
 unlock:
 	mutex_unlock(&opts->lock);
 out:
+	config_item_put(header);
 	mutex_unlock(su_mutex);
 	return ret;
 }
@@ -579,6 +580,7 @@ static void uvcg_control_class_drop_link(struct config_item *src,
 unlock:
 	mutex_unlock(&opts->lock);
 out:
+	config_item_put(header);
 	mutex_unlock(su_mutex);
 }
 
@@ -2038,6 +2040,7 @@ static int uvcg_streaming_class_allow_link(struct config_item *src,
 unlock:
 	mutex_unlock(&opts->lock);
 out:
+	config_item_put(header);
 	mutex_unlock(su_mutex);
 	return ret;
 }
@@ -2078,6 +2081,7 @@ static void uvcg_streaming_class_drop_link(struct config_item *src,
 unlock:
 	mutex_unlock(&opts->lock);
 out:
+	config_item_put(header);
 	mutex_unlock(su_mutex);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 098/191] usb: gadget: uvc: configfs: Prevent format changes after linking header

[Sasha Levin]

From: Joel Pepper <joel.pepper@rwth-aachen.de>

[ Upstream commit cb2200f7af8341aaf0c6abd7ba37e4c667c41639 ]

While checks are in place to avoid attributes and children of a format
being manipulated after the format is linked into the streaming header,
the linked flag was never actually set, invalidating the protections.
Update the flag as appropriate in the header link calls.

Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_configfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index dc4edba95a478..9478a7cdb1433 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -766,6 +766,7 @@ static int uvcg_streaming_header_allow_link(struct config_item *src,
 	format_ptr->fmt = target_fmt;
 	list_add_tail(&format_ptr->entry, &src_hdr->formats);
 	++src_hdr->num_fmt;
+	++target_fmt->linked;
 
 out:
 	mutex_unlock(&opts->lock);
@@ -803,6 +804,8 @@ static void uvcg_streaming_header_drop_link(struct config_item *src,
 			break;
 		}
 
+	--target_fmt->linked;
+
 out:
 	mutex_unlock(&opts->lock);
 	mutex_unlock(su_mutex);
-- 
2.20.1

[PATCH AUTOSEL 4.19 099/191] usb: gadget: uvc: configfs: Sort frame intervals upon writing

[Sasha Levin]

From: Paul Elder <paul.elder@ideasonboard.com>

[ Upstream commit 89969a842e72b1b653140a4bbddd927b242736d0 ]

There is an issue where the host is unable to tell the gadget what frame
rate it wants if the dwFrameIntervals in the interface descriptors are
not in ascending order. This means that when instantiating a uvc gadget
via configfs the user must make sure the dwFrameIntervals are in
ascending order.

Instead of silently failing the breaking of this rule, we sort the
dwFrameIntervals upon writing to configfs.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_configfs.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index 9478a7cdb1433..2e4c0391b5836 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -9,6 +9,9 @@
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
  */
+
+#include <linux/sort.h>
+
 #include "u_uvc.h"
 #include "uvc_configfs.h"
 
@@ -31,6 +34,14 @@ static struct configfs_attribute prefix##attr_##cname = { \
 	.show		= prefix##cname##_show,				\
 }
 
+static int uvcg_config_compare_u32(const void *l, const void *r)
+{
+	u32 li = *(const u32 *)l;
+	u32 ri = *(const u32 *)r;
+
+	return li < ri ? -1 : li == ri ? 0 : 1;
+}
+
 static inline struct f_uvc_opts *to_f_uvc_opts(struct config_item *item)
 {
 	return container_of(to_config_group(item), struct f_uvc_opts,
@@ -1134,6 +1145,8 @@ static ssize_t uvcg_frame_dw_frame_interval_store(struct config_item *item,
 	kfree(ch->dw_frame_interval);
 	ch->dw_frame_interval = frm_intrv;
 	ch->frame.b_frame_interval_type = n;
+	sort(ch->dw_frame_interval, n, sizeof(*ch->dw_frame_interval),
+	     uvcg_config_compare_u32, NULL);
 	ret = len;
 
 end:
-- 
2.20.1

[PATCH AUTOSEL 4.19 100/191] ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit ff1e37c6809daab75f7b2dea1efe69330e8eb65b ]

The proper parent clock for audio subsystem for Exynos5420 and Exynos5800
SoCs is CLK_MAU_EPLL. This fixes following warning:

    clk: failed to reparent mout_audss to fout_epll: -22

Fixes: ed7d1307077e: ARM: dts: exynos: Enable HDMI audio support on Peach Pit
Fixes: bae0f445c1e7: ARM: dts: exynos: Enable HDMI audio support on Peach Pi
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 25bdc9d97a4df..3e666caa86bfe 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7989631b39ccf..90222ec19f877 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 101/191] i2c: aspeed: fix invalid clock parameters for very large divisors

[Sasha Levin]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit 17ccba67109cd0631f206cf49e17986218b47854 ]

The function that computes clock parameters from divisors did not
respect the maximum size of the bitfields that the parameters were
written to. This fixes the bug.

This bug can be reproduced with (and this fix verified with) the test
at: https://kunit-review.googlesource.com/c/linux/+/1035/

Discovered-by-KUnit: https://kunit-review.googlesource.com/c/linux/+/1035/
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-aspeed.c | 65 +++++++++++++++++++++++----------
 1 file changed, 45 insertions(+), 20 deletions(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a19fbff168617..d9401b5191069 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -137,7 +137,8 @@ struct aspeed_i2c_bus {
 	/* Synchronizes I/O mem access to base. */
 	spinlock_t			lock;
 	struct completion		cmd_complete;
-	u32				(*get_clk_reg_val)(u32 divisor);
+	u32				(*get_clk_reg_val)(struct device *dev,
+							   u32 divisor);
 	unsigned long			parent_clk_frequency;
 	u32				bus_frequency;
 	/* Transaction state. */
@@ -686,16 +687,27 @@ static const struct i2c_algorithm aspeed_i2c_algo = {
 #endif /* CONFIG_I2C_SLAVE */
 };
 
-static u32 aspeed_i2c_get_clk_reg_val(u32 clk_high_low_max, u32 divisor)
+static u32 aspeed_i2c_get_clk_reg_val(struct device *dev,
+				      u32 clk_high_low_mask,
+				      u32 divisor)
 {
-	u32 base_clk, clk_high, clk_low, tmp;
+	u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp;
+
+	/*
+	 * SCL_high and SCL_low represent a value 1 greater than what is stored
+	 * since a zero divider is meaningless. Thus, the max value each can
+	 * store is every bit set + 1. Since SCL_high and SCL_low are added
+	 * together (see below), the max value of both is the max value of one
+	 * them times two.
+	 */
+	clk_high_low_max = (clk_high_low_mask + 1) * 2;
 
 	/*
 	 * The actual clock frequency of SCL is:
 	 *	SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
 	 *		 = APB_freq / divisor
 	 * where base_freq is a programmable clock divider; its value is
-	 *	base_freq = 1 << base_clk
+	 *	base_freq = 1 << base_clk_divisor
 	 * SCL_high is the number of base_freq clock cycles that SCL stays high
 	 * and SCL_low is the number of base_freq clock cycles that SCL stays
 	 * low for a period of SCL.
@@ -705,47 +717,59 @@ static u32 aspeed_i2c_get_clk_reg_val(u32 clk_high_low_max, u32 divisor)
 	 *	SCL_low	 = clk_low + 1
 	 * Thus,
 	 *	SCL_freq = APB_freq /
-	 *		((1 << base_clk) * (clk_high + 1 + clk_low + 1))
+	 *		((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1))
 	 * The documentation recommends clk_high >= clk_high_max / 2 and
 	 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
 	 * gives us the following solution:
 	 */
-	base_clk = divisor > clk_high_low_max ?
+	base_clk_divisor = divisor > clk_high_low_max ?
 			ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
-	tmp = (divisor + (1 << base_clk) - 1) >> base_clk;
-	clk_low = tmp / 2;
-	clk_high = tmp - clk_low;
 
-	if (clk_high)
-		clk_high--;
+	if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
+		base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK;
+		clk_low = clk_high_low_mask;
+		clk_high = clk_high_low_mask;
+		dev_err(dev,
+			"clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n",
+			divisor, (1 << base_clk_divisor) * clk_high_low_max);
+	} else {
+		tmp = (divisor + (1 << base_clk_divisor) - 1)
+				>> base_clk_divisor;
+		clk_low = tmp / 2;
+		clk_high = tmp - clk_low;
+
+		if (clk_high)
+			clk_high--;
 
-	if (clk_low)
-		clk_low--;
+		if (clk_low)
+			clk_low--;
+	}
 
 
 	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
 		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
 			| ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
 			   & ASPEED_I2CD_TIME_SCL_LOW_MASK)
-			| (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
+			| (base_clk_divisor
+			   & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
 }
 
-static u32 aspeed_i2c_24xx_get_clk_reg_val(u32 divisor)
+static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor)
 {
 	/*
 	 * clk_high and clk_low are each 3 bits wide, so each can hold a max
 	 * value of 8 giving a clk_high_low_max of 16.
 	 */
-	return aspeed_i2c_get_clk_reg_val(16, divisor);
+	return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor);
 }
 
-static u32 aspeed_i2c_25xx_get_clk_reg_val(u32 divisor)
+static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor)
 {
 	/*
 	 * clk_high and clk_low are each 4 bits wide, so each can hold a max
 	 * value of 16 giving a clk_high_low_max of 32.
 	 */
-	return aspeed_i2c_get_clk_reg_val(32, divisor);
+	return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor);
 }
 
 /* precondition: bus.lock has been acquired. */
@@ -758,7 +782,7 @@ static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
 	clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
 			ASPEED_I2CD_TIME_THDSTA_MASK |
 			ASPEED_I2CD_TIME_TACST_MASK);
-	clk_reg_val |= bus->get_clk_reg_val(divisor);
+	clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor);
 	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
 	writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
 
@@ -874,7 +898,8 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 	if (!match)
 		bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
 	else
-		bus->get_clk_reg_val = (u32 (*)(u32))match->data;
+		bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
+				match->data;
 
 	/* Initialize the I2C adapter */
 	spin_lock_init(&bus->lock);
-- 
2.20.1

[PATCH AUTOSEL 4.19 102/191] gpiolib: Fix gpio_direction_* for single direction GPIOs

[Sasha Levin]

From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>

[ Upstream commit ae9847f48a4b4bff0335da20be63ac84d94eb54c ]

GPIOs with no programmable direction are not required to implement
direction_output nor direction_input.

If we try to set an output direction on an output-only GPIO or input
direction on an input-only GPIO simply return 0.

This allows this single direction GPIO to be used by libgpiod.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 565ab945698ca..b81a27c7f89c4 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2541,19 +2541,27 @@ EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
 int gpiod_direction_input(struct gpio_desc *desc)
 {
 	struct gpio_chip	*chip;
-	int			status = -EINVAL;
+	int			status = 0;
 
 	VALIDATE_DESC(desc);
 	chip = desc->gdev->chip;
 
-	if (!chip->get || !chip->direction_input) {
+	if (!chip->get && chip->direction_input) {
 		gpiod_warn(desc,
-			"%s: missing get() or direction_input() operations\n",
+			"%s: missing get() and direction_input() operations\n",
 			__func__);
 		return -EIO;
 	}
 
-	status = chip->direction_input(chip, gpio_chip_hwgpio(desc));
+	if (chip->direction_input) {
+		status = chip->direction_input(chip, gpio_chip_hwgpio(desc));
+	} else if (chip->get_direction &&
+		  (chip->get_direction(chip, gpio_chip_hwgpio(desc)) != 1)) {
+		gpiod_warn(desc,
+			"%s: missing direction_input() operation\n",
+			__func__);
+		return -EIO;
+	}
 	if (status == 0)
 		clear_bit(FLAG_IS_OUT, &desc->flags);
 
@@ -2575,16 +2583,28 @@ static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
 {
 	struct gpio_chip *gc = desc->gdev->chip;
 	int val = !!value;
-	int ret;
+	int ret = 0;
 
-	if (!gc->set || !gc->direction_output) {
+	if (!gc->set && !gc->direction_output) {
 		gpiod_warn(desc,
-		       "%s: missing set() or direction_output() operations\n",
+		       "%s: missing set() and direction_output() operations\n",
 		       __func__);
 		return -EIO;
 	}
 
-	ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
+	if (gc->direction_output) {
+		ret = gc->direction_output(gc, gpio_chip_hwgpio(desc), val);
+	} else {
+		if (gc->get_direction &&
+		    gc->get_direction(gc, gpio_chip_hwgpio(desc))) {
+			gpiod_warn(desc,
+				"%s: missing direction_output() operation\n",
+				__func__);
+			return -EIO;
+		}
+		gc->set(gc, gpio_chip_hwgpio(desc), val);
+	}
+
 	if (!ret)
 		set_bit(FLAG_IS_OUT, &desc->flags);
 	trace_gpio_value(desc_to_gpio(desc), 0, val);
-- 
2.20.1

[PATCH AUTOSEL 4.19 103/191] ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws

[Sasha Levin]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit 95590a6286c547b7287d01c55515fb96b904aa03 ]

of_find_device_by_node takes a reference to the struct device when it
finds a match via get_device. but it fails to put_device in
at91_pm_config_ws, for_each_matching_node_and_match will get and put
the node properly, there is no need to call the of_put_node. Therefore,
just call put_device instead of of_node_put in at91_pm_config_ws.

Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode")
Suggested-by: Claudiu Beznea <Claudiu.Beznea@microchip.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-at91/pm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 0921e2c10edfd..e2e4df3d11e53 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -143,15 +143,15 @@ static int at91_pm_config_ws(unsigned int pm_mode, bool set)
 
 			/* Check if enabled on SHDWC. */
 			if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
-				goto put_node;
+				goto put_device;
 
 			mode |= wsi->pmc_fsmr_bit;
 			if (wsi->set_polarity)
 				polarity |= wsi->pmc_fsmr_bit;
 		}
 
-put_node:
-		of_node_put(np);
+put_device:
+		put_device(&pdev->dev);
 	}
 
 	if (mode) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 104/191] phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 26728df4b254ae06247726a9a6e64823e39ac504 ]

Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same
Broadcom SATA PHY that other SoCs are using, make it possible to select
that driver on these platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/broadcom/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 8786a9674471d..aa917a61071db 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -60,7 +60,8 @@ config PHY_NS2_USB_DRD
 
 config PHY_BRCM_SATA
 	tristate "Broadcom SATA PHY driver"
-	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
+		   ARCH_BCM_63XX || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	default ARCH_BCM_IPROC
-- 
2.20.1

[PATCH AUTOSEL 4.19 105/191] phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 09938ea9d136243e8d1fed6d4d7a257764f28f6d ]

This patch fixes and issue that the vbus_ctrl is disabled by
rcar_gen3_init_from_a_peri_to_a_host(), so a usb host cannot
supply the vbus.

Note that this condition will exit when the otg irq happens
even if we don't apply this patch.

Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 6fb2b69695905..d22b1ec2e58c7 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -199,7 +199,7 @@ static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
 	val = readl(usb2_base + USB2_OBINTEN);
 	writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
 
-	rcar_gen3_enable_vbus_ctrl(ch, 0);
+	rcar_gen3_enable_vbus_ctrl(ch, 1);
 	rcar_gen3_init_for_host(ch);
 
 	writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
-- 
2.20.1

[PATCH AUTOSEL 4.19 106/191] phy: phy-twl4030-usb: fix denied runtime access

[Sasha Levin]

From: Andreas Kemnade <andreas@kemnade.info>

[ Upstream commit 6c7103aa026094a4ee2c2708ec6977a6dfc5331d ]

When runtime is not enabled, pm_runtime_get_sync() returns -EACCESS,
the counter will be incremented but the resume callback not called,
so enumeration and charging will not start properly.
To avoid that happen, disable irq on suspend and recheck on resume.

Practically this happens when the device is woken up from suspend by
plugging in usb.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/ti/phy-twl4030-usb.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index a44680d64f9b4..c267afb68f077 100644
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -144,6 +144,7 @@
 #define PMBR1				0x0D
 #define GPIO_USB_4PIN_ULPI_2430C	(3 << 0)
 
+static irqreturn_t twl4030_usb_irq(int irq, void *_twl);
 /*
  * If VBUS is valid or ID is ground, then we know a
  * cable is present and we need to be runtime-enabled
@@ -395,6 +396,33 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 	WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
 }
 
+static int __maybe_unused twl4030_usb_suspend(struct device *dev)
+{
+	struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+	/*
+	 * we need enabled runtime on resume,
+	 * so turn irq off here, so we do not get it early
+	 * note: wakeup on usb plug works independently of this
+	 */
+	dev_dbg(twl->dev, "%s\n", __func__);
+	disable_irq(twl->irq);
+
+	return 0;
+}
+
+static int __maybe_unused twl4030_usb_resume(struct device *dev)
+{
+	struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+	dev_dbg(twl->dev, "%s\n", __func__);
+	enable_irq(twl->irq);
+	/* check whether cable status changed */
+	twl4030_usb_irq(0, twl);
+
+	return 0;
+}
+
 static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev)
 {
 	struct twl4030_usb *twl = dev_get_drvdata(dev);
@@ -655,6 +683,7 @@ static const struct phy_ops ops = {
 static const struct dev_pm_ops twl4030_usb_pm_ops = {
 	SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
 			   twl4030_usb_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(twl4030_usb_suspend, twl4030_usb_resume)
 };
 
 static int twl4030_usb_probe(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 107/191] ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point

[Sasha Levin]

From: Anson Huang <Anson.Huang@nxp.com>

[ Upstream commit 245f880c25dbd8927af0f33aa5d1404370013957 ]

Update VDD_SOC voltage to 1.25V for 900MHz operating point
according to datasheet Rev. 1.3, 08/2018, 25mV is added to
the minimum allowed values to cover power supply ripple.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ull.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index cd1776a7015ac..796ed35d4ac9a 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -22,7 +22,7 @@
 	>;
 	fsl,soc-operating-points = <
 		/* KHz	uV */
-		900000	1175000
+		900000	1250000
 		792000	1175000
 		528000	1175000
 		396000	1175000
-- 
2.20.1

[PATCH AUTOSEL 4.19 108/191] usb: gadget: uvc: Factor out video USB request queueing

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 9d1ff5dcb3cd3390b1e56f1c24ae42c72257c4a3 ]

USB requests for video data are queued from two different locations in
the driver, with the same code block occurring twice. Factor it out to a
function.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_video.c | 30 ++++++++++++++++---------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index d3567b90343a4..a95c8e2364edc 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -125,6 +125,19 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
  * Request handling
  */
 
+static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req)
+{
+	int ret;
+
+	ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
+	if (ret < 0) {
+		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
+		usb_ep_set_halt(video->ep);
+	}
+
+	return ret;
+}
+
 /*
  * I somehow feel that synchronisation won't be easy to achieve here. We have
  * three events that control USB requests submission:
@@ -189,14 +202,13 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 
 	video->encode(req, video, buf);
 
-	if ((ret = usb_ep_queue(ep, req, GFP_ATOMIC)) < 0) {
-		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
-		usb_ep_set_halt(ep);
-		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+	ret = uvcg_video_ep_queue(video, req);
+	spin_unlock_irqrestore(&video->queue.irqlock, flags);
+
+	if (ret < 0) {
 		uvcg_queue_cancel(queue, 0);
 		goto requeue;
 	}
-	spin_unlock_irqrestore(&video->queue.irqlock, flags);
 
 	return;
 
@@ -316,15 +328,13 @@ int uvcg_video_pump(struct uvc_video *video)
 		video->encode(req, video, buf);
 
 		/* Queue the USB request */
-		ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
+		ret = uvcg_video_ep_queue(video, req);
+		spin_unlock_irqrestore(&queue->irqlock, flags);
+
 		if (ret < 0) {
-			printk(KERN_INFO "Failed to queue request (%d)\n", ret);
-			usb_ep_set_halt(video->ep);
-			spin_unlock_irqrestore(&queue->irqlock, flags);
 			uvcg_queue_cancel(queue, 0);
 			break;
 		}
-		spin_unlock_irqrestore(&queue->irqlock, flags);
 	}
 
 	spin_lock_irqsave(&video->req_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 4.19 109/191] usb: gadget: uvc: Only halt video streaming endpoint in bulk mode

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 8dbf9c7abefd5c1434a956d5c6b25e11183061a3 ]

When USB requests for video data fail to be submitted, the driver
signals a problem to the host by halting the video streaming endpoint.
This is only valid in bulk mode, as isochronous transfers have no
handshake phase and can't thus report a stall. The usb_ep_set_halt()
call returns an error when using isochronous endpoints, which we happily
ignore, but some UDCs complain in the kernel log. Fix this by only
trying to halt the endpoint in bulk mode.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/uvc_video.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index a95c8e2364edc..2c9821ec836e7 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -132,7 +132,9 @@ static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req)
 	ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
 	if (ret < 0) {
 		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
-		usb_ep_set_halt(video->ep);
+		/* Isochronous endpoints can't be halted. */
+		if (usb_endpoint_xfer_bulk(video->ep->desc))
+			usb_ep_set_halt(video->ep);
 	}
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.19 110/191] coresight: Use ERR_CAST instead of ERR_PTR

[Sasha Levin]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit bbd35ba6fab5419e58e96f35f1431f13bdc14f98 ]

Use ERR_CAT inlined function to replace the ERR_PTR(PTR_ERR). It
make the code more concise.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-tmc-etr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 2eda5de304c20..11963647e19ae 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -536,7 +536,7 @@ tmc_init_etr_sg_table(struct device *dev, int node,
 	sg_table = tmc_alloc_sg_table(dev, node, nr_tpages, nr_dpages, pages);
 	if (IS_ERR(sg_table)) {
 		kfree(etr_table);
-		return ERR_PTR(PTR_ERR(sg_table));
+		return ERR_CAST(sg_table);
 	}
 
 	etr_table->sg_table = sg_table;
-- 
2.20.1

[PATCH AUTOSEL 4.19 111/191] coresight: Fix handling of sinks

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit c71369de02b285d9da526a526d8f2affc7b17c59 ]

The coresight components could be operated either in sysfs mode or in perf
mode. For some of the components, the mode of operation doesn't matter as
they simply relay the data to the next component in the trace path. But for
sinks, they need to be able to provide the trace data back to the user.
Thus we need to make sure that "mode" is handled appropriately. e.g,
the sysfs mode could have multiple sources driving the trace data, while
perf mode doesn't allow sharing the sink.

The coresight_enable_sink() however doesn't really allow this check to
trigger as it skips the "enable_sink" callback if the component is
already enabled, irrespective of the mode. This could cause mixing
of data from different modes or even same mode (in perf), if the
sources are different. Also, if we fail to enable the sink while
enabling a path (where sink is the first component enabled),
we could end up in disabling the components in the "entire"
path which were not enabled in this trial, causing disruptions
in the existing trace paths.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index 3e07fd335f8cf..c0dabbddc1e49 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -132,12 +132,14 @@ static int coresight_enable_sink(struct coresight_device *csdev, u32 mode)
 {
 	int ret;
 
-	if (!csdev->enable) {
-		if (sink_ops(csdev)->enable) {
-			ret = sink_ops(csdev)->enable(csdev, mode);
-			if (ret)
-				return ret;
-		}
+	/*
+	 * We need to make sure the "new" session is compatible with the
+	 * existing "mode" of operation.
+	 */
+	if (sink_ops(csdev)->enable) {
+		ret = sink_ops(csdev)->enable(csdev, mode);
+		if (ret)
+			return ret;
 		csdev->enable = true;
 	}
 
@@ -339,8 +341,14 @@ int coresight_enable_path(struct list_head *path, u32 mode)
 		switch (type) {
 		case CORESIGHT_DEV_TYPE_SINK:
 			ret = coresight_enable_sink(csdev, mode);
+			/*
+			 * Sink is the first component turned on. If we
+			 * failed to enable the sink, there are no components
+			 * that need disabling. Disabling the path here
+			 * would mean we could disrupt an existing session.
+			 */
 			if (ret)
-				goto err;
+				goto out;
 			break;
 		case CORESIGHT_DEV_TYPE_SOURCE:
 			/* sources are enabled from either sysFS or Perf */
-- 
2.20.1

[PATCH AUTOSEL 4.19 112/191] coresight: perf: Fix per cpu path management

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit 5ecabe4a76e8cdb61fa3e24862d9ca240a1c4ddf ]

We create a coresight trace path for each online CPU when
we start the event. We rely on the number of online CPUs
and then go on to allocate an array matching the "number of
online CPUs" for holding the path and then uses normal
CPU id as the index to the array. This is problematic as
we could have some offline CPUs causing us to access beyond
the actual array size (e.g, on a dual SMP system, if CPU0 is
offline, CPU1 could be really accessing beyond the array).
The solution is to switch to per-cpu array for holding the path.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hwtracing/coresight/coresight-etm-perf.c  | 55 ++++++++++++++-----
 1 file changed, 40 insertions(+), 15 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 0f5e03e4df22c..4b53d55788a07 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/perf_event.h>
+#include <linux/percpu-defs.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
@@ -33,7 +34,7 @@ struct etm_event_data {
 	struct work_struct work;
 	cpumask_t mask;
 	void *snk_config;
-	struct list_head **path;
+	struct list_head * __percpu *path;
 };
 
 static DEFINE_PER_CPU(struct perf_output_handle, ctx_handle);
@@ -61,6 +62,18 @@ static const struct attribute_group *etm_pmu_attr_groups[] = {
 	NULL,
 };
 
+static inline struct list_head **
+etm_event_cpu_path_ptr(struct etm_event_data *data, int cpu)
+{
+	return per_cpu_ptr(data->path, cpu);
+}
+
+static inline struct list_head *
+etm_event_cpu_path(struct etm_event_data *data, int cpu)
+{
+	return *etm_event_cpu_path_ptr(data, cpu);
+}
+
 static void etm_event_read(struct perf_event *event) {}
 
 static int etm_addr_filters_alloc(struct perf_event *event)
@@ -120,23 +133,26 @@ static void free_event_data(struct work_struct *work)
 	 */
 	if (event_data->snk_config) {
 		cpu = cpumask_first(mask);
-		sink = coresight_get_sink(event_data->path[cpu]);
+		sink = coresight_get_sink(etm_event_cpu_path(event_data, cpu));
 		if (sink_ops(sink)->free_buffer)
 			sink_ops(sink)->free_buffer(event_data->snk_config);
 	}
 
 	for_each_cpu(cpu, mask) {
-		if (!(IS_ERR_OR_NULL(event_data->path[cpu])))
-			coresight_release_path(event_data->path[cpu]);
+		struct list_head **ppath;
+
+		ppath = etm_event_cpu_path_ptr(event_data, cpu);
+		if (!(IS_ERR_OR_NULL(*ppath)))
+			coresight_release_path(*ppath);
+		*ppath = NULL;
 	}
 
-	kfree(event_data->path);
+	free_percpu(event_data->path);
 	kfree(event_data);
 }
 
 static void *alloc_event_data(int cpu)
 {
-	int size;
 	cpumask_t *mask;
 	struct etm_event_data *event_data;
 
@@ -147,7 +163,6 @@ static void *alloc_event_data(int cpu)
 
 	/* Make sure nothing disappears under us */
 	get_online_cpus();
-	size = num_online_cpus();
 
 	mask = &event_data->mask;
 	if (cpu != -1)
@@ -164,8 +179,8 @@ static void *alloc_event_data(int cpu)
 	 * unused memory when dealing with single CPU trace scenarios is small
 	 * compared to the cost of searching through an optimized array.
 	 */
-	event_data->path = kcalloc(size,
-				   sizeof(struct list_head *), GFP_KERNEL);
+	event_data->path = alloc_percpu(struct list_head *);
+
 	if (!event_data->path) {
 		kfree(event_data);
 		return NULL;
@@ -213,6 +228,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
 
 	/* Setup the path for each CPU in a trace session */
 	for_each_cpu(cpu, mask) {
+		struct list_head *path;
 		struct coresight_device *csdev;
 
 		csdev = per_cpu(csdev_src, cpu);
@@ -224,9 +240,11 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
 		 * list of devices from source to sink that can be
 		 * referenced later when the path is actually needed.
 		 */
-		event_data->path[cpu] = coresight_build_path(csdev, sink);
-		if (IS_ERR(event_data->path[cpu]))
+		path = coresight_build_path(csdev, sink);
+		if (IS_ERR(path))
 			goto err;
+
+		*etm_event_cpu_path_ptr(event_data, cpu) = path;
 	}
 
 	if (!sink_ops(sink)->alloc_buffer)
@@ -255,6 +273,7 @@ static void etm_event_start(struct perf_event *event, int flags)
 	struct etm_event_data *event_data;
 	struct perf_output_handle *handle = this_cpu_ptr(&ctx_handle);
 	struct coresight_device *sink, *csdev = per_cpu(csdev_src, cpu);
+	struct list_head *path;
 
 	if (!csdev)
 		goto fail;
@@ -267,8 +286,9 @@ static void etm_event_start(struct perf_event *event, int flags)
 	if (!event_data)
 		goto fail;
 
+	path = etm_event_cpu_path(event_data, cpu);
 	/* We need a sink, no need to continue without one */
-	sink = coresight_get_sink(event_data->path[cpu]);
+	sink = coresight_get_sink(path);
 	if (WARN_ON_ONCE(!sink || !sink_ops(sink)->set_buffer))
 		goto fail_end_stop;
 
@@ -278,7 +298,7 @@ static void etm_event_start(struct perf_event *event, int flags)
 		goto fail_end_stop;
 
 	/* Nothing will happen without a path */
-	if (coresight_enable_path(event_data->path[cpu], CS_MODE_PERF))
+	if (coresight_enable_path(path, CS_MODE_PERF))
 		goto fail_end_stop;
 
 	/* Tell the perf core the event is alive */
@@ -306,6 +326,7 @@ static void etm_event_stop(struct perf_event *event, int mode)
 	struct coresight_device *sink, *csdev = per_cpu(csdev_src, cpu);
 	struct perf_output_handle *handle = this_cpu_ptr(&ctx_handle);
 	struct etm_event_data *event_data = perf_get_aux(handle);
+	struct list_head *path;
 
 	if (event->hw.state == PERF_HES_STOPPED)
 		return;
@@ -313,7 +334,11 @@ static void etm_event_stop(struct perf_event *event, int mode)
 	if (!csdev)
 		return;
 
-	sink = coresight_get_sink(event_data->path[cpu]);
+	path = etm_event_cpu_path(event_data, cpu);
+	if (!path)
+		return;
+
+	sink = coresight_get_sink(path);
 	if (!sink)
 		return;
 
@@ -344,7 +369,7 @@ static void etm_event_stop(struct perf_event *event, int mode)
 	}
 
 	/* Disabling the path make its elements available to other sessions */
-	coresight_disable_path(event_data->path[cpu]);
+	coresight_disable_path(path);
 }
 
 static int etm_event_add(struct perf_event *event, int mode)
-- 
2.20.1

[PATCH AUTOSEL 4.19 113/191] coresight: perf: Disable trace path upon source error

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit 4f8ef21007531c3d7cb5b826e7b2c8999b65ecae ]

We enable the trace path, before activating the source.
If we fail to enable the source, we must disable the path
to make sure it is available for another session.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm-perf.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 4b53d55788a07..c3c6452015142 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -306,11 +306,13 @@ static void etm_event_start(struct perf_event *event, int flags)
 
 	/* Finally enable the tracer */
 	if (source_ops(csdev)->enable(csdev, event, CS_MODE_PERF))
-		goto fail_end_stop;
+		goto fail_disable_path;
 
 out:
 	return;
 
+fail_disable_path:
+	coresight_disable_path(path);
 fail_end_stop:
 	perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
 	perf_aux_output_end(handle, 0);
-- 
2.20.1

[PATCH AUTOSEL 4.19 114/191] coresight: tmc-etr: Handle driver mode specific ETR buffers

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit 96a7f644006ecc05eaaa1a5d09373d0ee63beb0a ]

Since the ETR could be driven either by SYSFS or by perf, it
becomes complicated how we deal with the buffers used for each
of these modes. The ETR driver cannot simply free the current
attached buffer without knowing the provider (i.e, sysfs vs perf).

To solve this issue, we provide:
1) the driver-mode specific etr buffer to be retained in the drvdata
2) the etr_buf for a session should be passed on when enabling the
   hardware, which will be stored in drvdata->etr_buf. This will be
   replaced (not free'd) as soon as the hardware is disabled, after
   necessary sync operation.

The advantages of this are :

1) The common code path doesn't need to worry about how to dispose
   an existing buffer, if it is about to start a new session with a
   different buffer, possibly in a different mode.
2) The driver mode can control its buffers and can get access to the
   saved session even when the hardware is operating in a different
   mode. (e.g, we can still access a trace buffer from a sysfs mode
   even if the etr is now used in perf mode, without disrupting the
   current session.)

Towards this, we introduce a sysfs specific data which will hold the
etr_buf used for sysfs mode of operation, controlled solely by the
sysfs mode handling code.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hwtracing/coresight/coresight-tmc-etr.c   | 58 ++++++++++++-------
 drivers/hwtracing/coresight/coresight-tmc.h   |  2 +
 2 files changed, 40 insertions(+), 20 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 11963647e19ae..2d6f428176ff8 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -895,10 +895,15 @@ static void tmc_sync_etr_buf(struct tmc_drvdata *drvdata)
 		tmc_etr_buf_insert_barrier_packet(etr_buf, etr_buf->offset);
 }
 
-static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
+static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata,
+			      struct etr_buf *etr_buf)
 {
 	u32 axictl, sts;
-	struct etr_buf *etr_buf = drvdata->etr_buf;
+
+	/* Callers should provide an appropriate buffer for use */
+	if (WARN_ON(!etr_buf || drvdata->etr_buf))
+		return;
+	drvdata->etr_buf = etr_buf;
 
 	/*
 	 * If this ETR is connected to a CATU, enable it before we turn
@@ -960,13 +965,16 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
  * also updating the @bufpp on where to find it. Since the trace data
  * starts at anywhere in the buffer, depending on the RRP, we adjust the
  * @len returned to handle buffer wrapping around.
+ *
+ * We are protected here by drvdata->reading != 0, which ensures the
+ * sysfs_buf stays alive.
  */
 ssize_t tmc_etr_get_sysfs_trace(struct tmc_drvdata *drvdata,
 				loff_t pos, size_t len, char **bufpp)
 {
 	s64 offset;
 	ssize_t actual = len;
-	struct etr_buf *etr_buf = drvdata->etr_buf;
+	struct etr_buf *etr_buf = drvdata->sysfs_buf;
 
 	if (pos + actual > etr_buf->len)
 		actual = etr_buf->len - pos;
@@ -996,7 +1004,14 @@ tmc_etr_free_sysfs_buf(struct etr_buf *buf)
 
 static void tmc_etr_sync_sysfs_buf(struct tmc_drvdata *drvdata)
 {
-	tmc_sync_etr_buf(drvdata);
+	struct etr_buf *etr_buf = drvdata->etr_buf;
+
+	if (WARN_ON(drvdata->sysfs_buf != etr_buf)) {
+		tmc_etr_free_sysfs_buf(drvdata->sysfs_buf);
+		drvdata->sysfs_buf = NULL;
+	} else {
+		tmc_sync_etr_buf(drvdata);
+	}
 }
 
 static void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
@@ -1017,6 +1032,8 @@ static void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
 
 	/* Disable CATU device if this ETR is connected to one */
 	tmc_etr_disable_catu(drvdata);
+	/* Reset the ETR buf used by hardware */
+	drvdata->etr_buf = NULL;
 }
 
 static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
@@ -1024,7 +1041,7 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
 	int ret = 0;
 	unsigned long flags;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
-	struct etr_buf *new_buf = NULL, *free_buf = NULL;
+	struct etr_buf *sysfs_buf = NULL, *new_buf = NULL, *free_buf = NULL;
 
 	/*
 	 * If we are enabling the ETR from disabled state, we need to make
@@ -1035,7 +1052,8 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
 	 * with the lock released.
 	 */
 	spin_lock_irqsave(&drvdata->spinlock, flags);
-	if (!drvdata->etr_buf || (drvdata->etr_buf->size != drvdata->size)) {
+	sysfs_buf = READ_ONCE(drvdata->sysfs_buf);
+	if (!sysfs_buf || (sysfs_buf->size != drvdata->size)) {
 		spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
 		/* Allocate memory with the locks released */
@@ -1064,14 +1082,14 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
 	 * If we don't have a buffer or it doesn't match the requested size,
 	 * use the buffer allocated above. Otherwise reuse the existing buffer.
 	 */
-	if (!drvdata->etr_buf ||
-	    (new_buf && drvdata->etr_buf->size != new_buf->size)) {
-		free_buf = drvdata->etr_buf;
-		drvdata->etr_buf = new_buf;
+	sysfs_buf = READ_ONCE(drvdata->sysfs_buf);
+	if (!sysfs_buf || (new_buf && sysfs_buf->size != new_buf->size)) {
+		free_buf = sysfs_buf;
+		drvdata->sysfs_buf = new_buf;
 	}
 
 	drvdata->mode = CS_MODE_SYSFS;
-	tmc_etr_enable_hw(drvdata);
+	tmc_etr_enable_hw(drvdata, drvdata->sysfs_buf);
 out:
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
@@ -1156,13 +1174,13 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
 		goto out;
 	}
 
-	/* If drvdata::etr_buf is NULL the trace data has been read already */
-	if (drvdata->etr_buf == NULL) {
+	/* If sysfs_buf is NULL the trace data has been read already */
+	if (!drvdata->sysfs_buf) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	/* Disable the TMC if need be */
+	/* Disable the TMC if we are trying to read from a running session */
 	if (drvdata->mode == CS_MODE_SYSFS)
 		tmc_etr_disable_hw(drvdata);
 
@@ -1176,7 +1194,7 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata)
 int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata)
 {
 	unsigned long flags;
-	struct etr_buf *etr_buf = NULL;
+	struct etr_buf *sysfs_buf = NULL;
 
 	/* config types are set a boot time and never change */
 	if (WARN_ON_ONCE(drvdata->config_type != TMC_CONFIG_TYPE_ETR))
@@ -1191,22 +1209,22 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata)
 		 * buffer. Since the tracer is still enabled drvdata::buf can't
 		 * be NULL.
 		 */
-		tmc_etr_enable_hw(drvdata);
+		tmc_etr_enable_hw(drvdata, drvdata->sysfs_buf);
 	} else {
 		/*
 		 * The ETR is not tracing and the buffer was just read.
 		 * As such prepare to free the trace buffer.
 		 */
-		etr_buf =  drvdata->etr_buf;
-		drvdata->etr_buf = NULL;
+		sysfs_buf = drvdata->sysfs_buf;
+		drvdata->sysfs_buf = NULL;
 	}
 
 	drvdata->reading = false;
 	spin_unlock_irqrestore(&drvdata->spinlock, flags);
 
 	/* Free allocated memory out side of the spinlock */
-	if (etr_buf)
-		tmc_free_etr_buf(etr_buf);
+	if (sysfs_buf)
+		tmc_etr_free_sysfs_buf(sysfs_buf);
 
 	return 0;
 }
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index 7027bd60c4cc8..872f63e3651ba 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -170,6 +170,7 @@ struct etr_buf {
  * @trigger_cntr: amount of words to store after a trigger.
  * @etr_caps:	Bitmask of capabilities of the TMC ETR, inferred from the
  *		device configuration register (DEVID)
+ * @sysfs_data:	SYSFS buffer for ETR.
  */
 struct tmc_drvdata {
 	void __iomem		*base;
@@ -189,6 +190,7 @@ struct tmc_drvdata {
 	enum tmc_mem_intf_width	memwidth;
 	u32			trigger_cntr;
 	u32			etr_caps;
+	struct etr_buf		*sysfs_buf;
 };
 
 struct etr_buf_operations {
-- 
2.20.1

[PATCH AUTOSEL 4.19 115/191] coresight: etm4x: Configure EL2 exception level when kernel is running in HYP

[Sasha Levin]

From: Tomasz Nowicki <tnowicki@caviumnetworks.com>

[ Upstream commit b860801e3237ec4c74cf8de0be4816996757ae5c ]

For non-VHE systems host kernel runs at EL1 and jumps to EL2 whenever
hypervisor code should be executed. In this case ETM4x driver must
restrict configuration to EL1 when it setups kernel tracing.
However, there is no separate hypervisor privilege level when VHE
is enabled, the host kernel runs at EL2.

This patch fixes configuration of TRCACATRn register for VHE systems
so that ETM_EXLEVEL_NS_HYP bit is used instead of ETM_EXLEVEL_NS_OS
to on/off kernel tracing. At the same time, it moves common code
to new helper.

Signed-off-by: Tomasz Nowicki <tnowicki@caviumnetworks.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-etm4x.c | 40 +++++++++----------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index e45b5ec2f4512..b7bc08cf90c69 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -28,6 +28,7 @@
 #include <linux/pm_runtime.h>
 #include <asm/sections.h>
 #include <asm/local.h>
+#include <asm/virt.h>
 
 #include "coresight-etm4x.h"
 #include "coresight-etm-perf.h"
@@ -616,7 +617,7 @@ static void etm4_set_default_config(struct etmv4_config *config)
 	config->vinst_ctrl |= BIT(0);
 }
 
-static u64 etm4_get_access_type(struct etmv4_config *config)
+static u64 etm4_get_ns_access_type(struct etmv4_config *config)
 {
 	u64 access_type = 0;
 
@@ -627,17 +628,26 @@ static u64 etm4_get_access_type(struct etmv4_config *config)
 	 *   Bit[13] Exception level 1 - OS
 	 *   Bit[14] Exception level 2 - Hypervisor
 	 *   Bit[15] Never implemented
-	 *
-	 * Always stay away from hypervisor mode.
 	 */
-	access_type = ETM_EXLEVEL_NS_HYP;
-
-	if (config->mode & ETM_MODE_EXCL_KERN)
-		access_type |= ETM_EXLEVEL_NS_OS;
+	if (!is_kernel_in_hyp_mode()) {
+		/* Stay away from hypervisor mode for non-VHE */
+		access_type =  ETM_EXLEVEL_NS_HYP;
+		if (config->mode & ETM_MODE_EXCL_KERN)
+			access_type |= ETM_EXLEVEL_NS_OS;
+	} else if (config->mode & ETM_MODE_EXCL_KERN) {
+		access_type = ETM_EXLEVEL_NS_HYP;
+	}
 
 	if (config->mode & ETM_MODE_EXCL_USER)
 		access_type |= ETM_EXLEVEL_NS_APP;
 
+	return access_type;
+}
+
+static u64 etm4_get_access_type(struct etmv4_config *config)
+{
+	u64 access_type = etm4_get_ns_access_type(config);
+
 	/*
 	 * EXLEVEL_S, bits[11:8], don't trace anything happening
 	 * in secure state.
@@ -891,20 +901,10 @@ void etm4_config_trace_mode(struct etmv4_config *config)
 
 	addr_acc = config->addr_acc[ETM_DEFAULT_ADDR_COMP];
 	/* clear default config */
-	addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS);
+	addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS |
+		      ETM_EXLEVEL_NS_HYP);
 
-	/*
-	 * EXLEVEL_NS, bits[15:12]
-	 * The Exception levels are:
-	 *   Bit[12] Exception level 0 - Application
-	 *   Bit[13] Exception level 1 - OS
-	 *   Bit[14] Exception level 2 - Hypervisor
-	 *   Bit[15] Never implemented
-	 */
-	if (mode & ETM_MODE_EXCL_KERN)
-		addr_acc |= ETM_EXLEVEL_NS_OS;
-	else
-		addr_acc |= ETM_EXLEVEL_NS_APP;
+	addr_acc |= etm4_get_ns_access_type(config);
 
 	config->addr_acc[ETM_DEFAULT_ADDR_COMP] = addr_acc;
 	config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = addr_acc;
-- 
2.20.1

[PATCH AUTOSEL 4.19 116/191] coresight: tmc: Fix byte-address alignment for RRP

[Sasha Levin]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit e7753f3937610633a540f2be81be87531f96ff04 ]

>From the comment in the code, it claims the requirement for byte-address
alignment for RRP register: 'for 32-bit, 64-bit and 128-bit wide trace
memory, the four LSBs must be 0s. For 256-bit wide trace memory, the
five LSBs must be 0s'.  This isn't consistent with the program, the
program sets five LSBs as zeros for 32/64/128-bit wide trace memory and
set six LSBs zeros for 256-bit wide trace memory.

After checking with the CoreSight Trace Memory Controller technical
reference manual (ARM DDI 0461B, section 3.3.4 RAM Read Pointer
Register), it proves the comment is right and the program does wrong
setting.

This patch fixes byte-address alignment for RRP by following correct
definition in the technical reference manual.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index 0549249f4b398..e31061308e19e 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -438,10 +438,10 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 		case TMC_MEM_INTF_WIDTH_32BITS:
 		case TMC_MEM_INTF_WIDTH_64BITS:
 		case TMC_MEM_INTF_WIDTH_128BITS:
-			mask = GENMASK(31, 5);
+			mask = GENMASK(31, 4);
 			break;
 		case TMC_MEM_INTF_WIDTH_256BITS:
-			mask = GENMASK(31, 6);
+			mask = GENMASK(31, 5);
 			break;
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 117/191] coresight: dynamic-replicator: Handle multiple connections

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit 30af4fb619e5126cb3152072e687b377fc9398d6 ]

When a replicator port is enabled, we block the traffic
on the other port and route all traffic to the new enabled
port. If there are two active trace sessions each targeting
the two different paths from the replicator, the second session
will disable the first session and route all the data to the
second path.
                    ETR
                 /
e.g, replicator
                 \
                    ETB

If CPU0 is operated in sysfs mode to ETR and CPU1 is operated
in perf mode to ETB, depending on the order in which the
replicator is enabled one device is blocked.

Ideally we need trace-id for the session to make the
right choice. That implies we need a trace-id allocation
logic for the coresight subsystem and use that to route
the traffic. The short term solution is to only manage
the "target port" and leave the other port untouched.
That leaves both the paths unaffected, except that some
unwanted traffic may be pushed to the paths (if the Trace-IDs
are not far enough), which is still fine and can be filtered
out while processing rather than silently blocking the data.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../coresight/coresight-dynamic-replicator.c  | 64 ++++++++++++++-----
 1 file changed, 47 insertions(+), 17 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
index f6d0571ab9dd5..d31f1d8758b24 100644
--- a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
@@ -34,26 +34,42 @@ struct replicator_state {
 	struct coresight_device	*csdev;
 };
 
+/*
+ * replicator_reset : Reset the replicator configuration to sane values.
+ */
+static void replicator_reset(struct replicator_state *drvdata)
+{
+	CS_UNLOCK(drvdata->base);
+
+	writel_relaxed(0xff, drvdata->base + REPLICATOR_IDFILTER0);
+	writel_relaxed(0xff, drvdata->base + REPLICATOR_IDFILTER1);
+
+	CS_LOCK(drvdata->base);
+}
+
 static int replicator_enable(struct coresight_device *csdev, int inport,
 			      int outport)
 {
+	u32 reg;
 	struct replicator_state *drvdata = dev_get_drvdata(csdev->dev.parent);
 
+	switch (outport) {
+	case 0:
+		reg = REPLICATOR_IDFILTER0;
+		break;
+	case 1:
+		reg = REPLICATOR_IDFILTER1;
+		break;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
 	CS_UNLOCK(drvdata->base);
 
-	/*
-	 * Ensure that the other port is disabled
-	 * 0x00 - passing through the replicator unimpeded
-	 * 0xff - disable (or impede) the flow of ATB data
-	 */
-	if (outport == 0) {
-		writel_relaxed(0x00, drvdata->base + REPLICATOR_IDFILTER0);
-		writel_relaxed(0xff, drvdata->base + REPLICATOR_IDFILTER1);
-	} else {
-		writel_relaxed(0x00, drvdata->base + REPLICATOR_IDFILTER1);
-		writel_relaxed(0xff, drvdata->base + REPLICATOR_IDFILTER0);
-	}
 
+	/* Ensure that the outport is enabled. */
+	writel_relaxed(0x00, drvdata->base + reg);
 	CS_LOCK(drvdata->base);
 
 	dev_info(drvdata->dev, "REPLICATOR enabled\n");
@@ -63,15 +79,25 @@ static int replicator_enable(struct coresight_device *csdev, int inport,
 static void replicator_disable(struct coresight_device *csdev, int inport,
 				int outport)
 {
+	u32 reg;
 	struct replicator_state *drvdata = dev_get_drvdata(csdev->dev.parent);
 
+	switch (outport) {
+	case 0:
+		reg = REPLICATOR_IDFILTER0;
+		break;
+	case 1:
+		reg = REPLICATOR_IDFILTER1;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
 	CS_UNLOCK(drvdata->base);
 
 	/* disable the flow of ATB data through port */
-	if (outport == 0)
-		writel_relaxed(0xff, drvdata->base + REPLICATOR_IDFILTER0);
-	else
-		writel_relaxed(0xff, drvdata->base + REPLICATOR_IDFILTER1);
+	writel_relaxed(0xff, drvdata->base + reg);
 
 	CS_LOCK(drvdata->base);
 
@@ -156,7 +182,11 @@ static int replicator_probe(struct amba_device *adev, const struct amba_id *id)
 	desc.groups = replicator_groups;
 	drvdata->csdev = coresight_register(&desc);
 
-	return PTR_ERR_OR_ZERO(drvdata->csdev);
+	if (!IS_ERR(drvdata->csdev)) {
+		replicator_reset(drvdata);
+		return 0;
+	}
+	return PTR_ERR(drvdata->csdev);
 }
 
 #ifdef CONFIG_PM
-- 
2.20.1

[PATCH AUTOSEL 4.19 118/191] slimbus: ngd: register ngd driver only once.

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 1830dad34c070161fda2ff1db77b39ffa78aa380 ]

Move ngd platform driver out of loop so that it registers only once.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index f63d1b8a09335..a9abde2f4088b 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1346,7 +1346,6 @@ static int of_qcom_slim_ngd_register(struct device *parent,
 		ngd->base = ctrl->base + ngd->id * data->offset +
 					(ngd->id - 1) * data->size;
 		ctrl->ngd = ngd;
-		platform_driver_register(&qcom_slim_ngd_driver);
 
 		return 0;
 	}
@@ -1445,6 +1444,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	init_completion(&ctrl->reconf);
 	init_completion(&ctrl->qmi.qmi_comp);
 
+	platform_driver_register(&qcom_slim_ngd_driver);
 	return of_qcom_slim_ngd_register(dev, ctrl);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 119/191] slimbus: ngd: return proper error code instead of zero

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 9652e6aa62a1836494ebb8dbd402587c083b568c ]

It looks like there is a typo in probe return. Fix it.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index a9abde2f4088b..e587be9064e74 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1393,7 +1393,7 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 	if (ctrl->mwq)
 		destroy_workqueue(ctrl->mwq);
 
-	return 0;
+	return ret;
 }
 
 static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 120/191] silmbus: ngd: register controller after power up.

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 94fe5f2b45c4108885e4b71f6b181068632ec904 ]

Register slimbus controller only after finishing powerup sequnce so that we
do not endup in situation where core starts sending transactions before
the controller is ready.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index e587be9064e74..d72f8eed2e8b7 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1234,8 +1234,17 @@ static int qcom_slim_ngd_enable(struct qcom_slim_ngd_ctrl *ctrl, bool enable)
 			pm_runtime_resume(ctrl->dev);
 		pm_runtime_mark_last_busy(ctrl->dev);
 		pm_runtime_put(ctrl->dev);
+
+		ret = slim_register_controller(&ctrl->ctrl);
+		if (ret) {
+			dev_err(ctrl->dev, "error adding slim controller\n");
+			return ret;
+		}
+
+		dev_info(ctrl->dev, "SLIM controller Registered\n");
 	} else {
 		qcom_slim_qmi_exit(ctrl);
+		slim_unregister_controller(&ctrl->ctrl);
 	}
 
 	return 0;
@@ -1360,11 +1369,6 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 	int ret;
 
 	ctrl->ctrl.dev = dev;
-	ret = slim_register_controller(&ctrl->ctrl);
-	if (ret) {
-		dev_err(dev, "error adding slim controller\n");
-		return ret;
-	}
 
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND);
@@ -1374,7 +1378,7 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 	ret = qcom_slim_ngd_qmi_svc_event_init(ctrl);
 	if (ret) {
 		dev_err(&pdev->dev, "QMI service registration failed:%d", ret);
-		goto err;
+		return ret;
 	}
 
 	INIT_WORK(&ctrl->m_work, qcom_slim_ngd_master_worker);
@@ -1386,8 +1390,6 @@ static int qcom_slim_ngd_probe(struct platform_device *pdev)
 	}
 
 	return 0;
-err:
-	slim_unregister_controller(&ctrl->ctrl);
 wq_err:
 	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
 	if (ctrl->mwq)
@@ -1460,7 +1462,7 @@ static int qcom_slim_ngd_remove(struct platform_device *pdev)
 	struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(&pdev->dev);
-	slim_unregister_controller(&ctrl->ctrl);
+	qcom_slim_ngd_enable(ctrl, false);
 	qcom_slim_ngd_exit_dma(ctrl);
 	qcom_slim_ngd_qmi_svc_event_deinit(&ctrl->qmi);
 	if (ctrl->mwq)
-- 
2.20.1

[PATCH AUTOSEL 4.19 121/191] misc: kgdbts: Fix restrict error

[Sasha Levin]

From: Laura Abbott <labbott@redhat.com>

[ Upstream commit fa0218ef733e6f247a1a3986e3eb12460064ac77 ]

kgdbts current fails when compiled with restrict:

drivers/misc/kgdbts.c: In function ‘configure_kgdbts’:
drivers/misc/kgdbts.c:1070:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict]
  strcpy(config, opt);
  ^~~~~~~~~~~~~~~~~~~

As the error says, config is being used in both the source and destination.
Refactor the code to avoid the extra copy and put the parsing closer to
the actual location.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/kgdbts.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index eb4d90b7d99e1..8b01257783dd8 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -985,6 +985,12 @@ static void kgdbts_run_tests(void)
 	int nmi_sleep = 0;
 	int i;
 
+	verbose = 0;
+	if (strstr(config, "V1"))
+		verbose = 1;
+	if (strstr(config, "V2"))
+		verbose = 2;
+
 	ptr = strchr(config, 'F');
 	if (ptr)
 		fork_test = simple_strtol(ptr + 1, NULL, 10);
@@ -1068,13 +1074,6 @@ static int kgdbts_option_setup(char *opt)
 		return -ENOSPC;
 	}
 	strcpy(config, opt);
-
-	verbose = 0;
-	if (strstr(config, "V1"))
-		verbose = 1;
-	if (strstr(config, "V2"))
-		verbose = 2;
-
 	return 0;
 }
 
@@ -1086,9 +1085,6 @@ static int configure_kgdbts(void)
 
 	if (!strlen(config) || isspace(config[0]))
 		goto noconfig;
-	err = kgdbts_option_setup(config);
-	if (err)
-		goto noconfig;
 
 	final_ack = 0;
 	run_plant_and_detach_test(1);
-- 
2.20.1

[PATCH AUTOSEL 4.19 122/191] misc: genwqe: should return proper error value.

[Sasha Levin]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit 02241995b004faa7d9ff628e97f24056190853f8 ]

The function should return -EFAULT when copy_from_user fails. Even
though the caller does not distinguish them. but we should keep backward
compatibility.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/genwqe/card_utils.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index f68435df76d48..22301bba8c495 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -298,7 +298,7 @@ static int genwqe_sgl_size(int num_pages)
 int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 			  void __user *user_addr, size_t user_size, int write)
 {
-	int rc;
+	int ret = -ENOMEM;
 	struct pci_dev *pci_dev = cd->pci_dev;
 
 	sgl->fpage_offs = offset_in_page((unsigned long)user_addr);
@@ -318,7 +318,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 	if (get_order(sgl->sgl_size) > MAX_ORDER) {
 		dev_err(&pci_dev->dev,
 			"[%s] err: too much memory requested!\n", __func__);
-		return -ENOMEM;
+		return ret;
 	}
 
 	sgl->sgl = __genwqe_alloc_consistent(cd, sgl->sgl_size,
@@ -326,7 +326,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 	if (sgl->sgl == NULL) {
 		dev_err(&pci_dev->dev,
 			"[%s] err: no memory available!\n", __func__);
-		return -ENOMEM;
+		return ret;
 	}
 
 	/* Only use buffering on incomplete pages */
@@ -339,7 +339,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 		/* Sync with user memory */
 		if (copy_from_user(sgl->fpage + sgl->fpage_offs,
 				   user_addr, sgl->fpage_size)) {
-			rc = -EFAULT;
+			ret = -EFAULT;
 			goto err_out;
 		}
 	}
@@ -352,7 +352,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 		/* Sync with user memory */
 		if (copy_from_user(sgl->lpage, user_addr + user_size -
 				   sgl->lpage_size, sgl->lpage_size)) {
-			rc = -EFAULT;
+			ret = -EFAULT;
 			goto err_out2;
 		}
 	}
@@ -374,7 +374,8 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 	sgl->sgl = NULL;
 	sgl->sgl_dma_addr = 0;
 	sgl->sgl_size = 0;
-	return -ENOMEM;
+
+	return ret;
 }
 
 int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
-- 
2.20.1

[PATCH AUTOSEL 4.19 123/191] vmbus: keep pointer to ring buffer page

[Sasha Levin]

From: Stephen Hemminger <stephen@networkplumber.org>

[ Upstream commit 52a42c2a90226dc61c99bbd0cb096deeb52c334b ]

Avoid going from struct page to virt address (and back) by just
keeping pointer to the allocated pages instead of virt address.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel.c         | 20 +++++++++-----------
 drivers/uio/uio_hv_generic.c |  5 +++--
 include/linux/hyperv.h       |  2 +-
 3 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index fdb0f832fadef..5e515533e9cdb 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -91,11 +91,14 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 	unsigned long flags;
 	int ret, err = 0;
 	struct page *page;
+	unsigned int order;
 
 	if (send_ringbuffer_size % PAGE_SIZE ||
 	    recv_ringbuffer_size % PAGE_SIZE)
 		return -EINVAL;
 
+	order = get_order(send_ringbuffer_size + recv_ringbuffer_size);
+
 	spin_lock_irqsave(&newchannel->lock, flags);
 	if (newchannel->state == CHANNEL_OPEN_STATE) {
 		newchannel->state = CHANNEL_OPENING_STATE;
@@ -110,21 +113,17 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 
 	/* Allocate the ring buffer */
 	page = alloc_pages_node(cpu_to_node(newchannel->target_cpu),
-				GFP_KERNEL|__GFP_ZERO,
-				get_order(send_ringbuffer_size +
-				recv_ringbuffer_size));
+				GFP_KERNEL|__GFP_ZERO, order);
 
 	if (!page)
-		page = alloc_pages(GFP_KERNEL|__GFP_ZERO,
-				   get_order(send_ringbuffer_size +
-					     recv_ringbuffer_size));
+		page = alloc_pages(GFP_KERNEL|__GFP_ZERO, order);
 
 	if (!page) {
 		err = -ENOMEM;
 		goto error_set_chnstate;
 	}
 
-	newchannel->ringbuffer_pages = page_address(page);
+	newchannel->ringbuffer_page = page;
 	newchannel->ringbuffer_pagecount = (send_ringbuffer_size +
 					   recv_ringbuffer_size) >> PAGE_SHIFT;
 
@@ -239,8 +238,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 error_free_pages:
 	hv_ringbuffer_cleanup(&newchannel->outbound);
 	hv_ringbuffer_cleanup(&newchannel->inbound);
-	__free_pages(page,
-		     get_order(send_ringbuffer_size + recv_ringbuffer_size));
+	__free_pages(page, order);
 error_set_chnstate:
 	newchannel->state = CHANNEL_OPEN_STATE;
 	return err;
@@ -666,8 +664,8 @@ static int vmbus_close_internal(struct vmbus_channel *channel)
 	hv_ringbuffer_cleanup(&channel->outbound);
 	hv_ringbuffer_cleanup(&channel->inbound);
 
-	free_pages((unsigned long)channel->ringbuffer_pages,
-		get_order(channel->ringbuffer_pagecount * PAGE_SIZE));
+	__free_pages(channel->ringbuffer_page,
+		     get_order(channel->ringbuffer_pagecount << PAGE_SHIFT));
 
 out:
 	return ret;
diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
index e401be8321ab5..170fa1f8f00e0 100644
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -131,11 +131,12 @@ static int hv_uio_ring_mmap(struct file *filp, struct kobject *kobj,
 		= container_of(kobj, struct vmbus_channel, kobj);
 	struct hv_device *dev = channel->primary_channel->device_obj;
 	u16 q_idx = channel->offermsg.offer.sub_channel_index;
+	void *ring_buffer = page_address(channel->ringbuffer_page);
 
 	dev_dbg(&dev->device, "mmap channel %u pages %#lx at %#lx\n",
 		q_idx, vma_pages(vma), vma->vm_pgoff);
 
-	return vm_iomap_memory(vma, virt_to_phys(channel->ringbuffer_pages),
+	return vm_iomap_memory(vma, virt_to_phys(ring_buffer),
 			       channel->ringbuffer_pagecount << PAGE_SHIFT);
 }
 
@@ -224,7 +225,7 @@ hv_uio_probe(struct hv_device *dev,
 	/* mem resources */
 	pdata->info.mem[TXRX_RING_MAP].name = "txrx_rings";
 	pdata->info.mem[TXRX_RING_MAP].addr
-		= (uintptr_t)dev->channel->ringbuffer_pages;
+		= (uintptr_t)page_address(dev->channel->ringbuffer_page);
 	pdata->info.mem[TXRX_RING_MAP].size
 		= dev->channel->ringbuffer_pagecount << PAGE_SHIFT;
 	pdata->info.mem[TXRX_RING_MAP].memtype = UIO_MEM_LOGICAL;
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index bbde887ed3931..c43e694fef7dd 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -739,7 +739,7 @@ struct vmbus_channel {
 	u32 ringbuffer_gpadlhandle;
 
 	/* Allocated memory for ring buffer */
-	void *ringbuffer_pages;
+	struct page *ringbuffer_page;
 	u32 ringbuffer_pagecount;
 	struct hv_ring_buffer_info outbound;	/* send to parent */
 	struct hv_ring_buffer_info inbound;	/* receive from parent */
-- 
2.20.1

[PATCH AUTOSEL 4.19 124/191] vfio/pci: Fix potential memory leak in vfio_msi_cap_len

[Sasha Levin]

From: Li Qiang <liq3ea@gmail.com>

[ Upstream commit 30ea32ab1951c80c6113f300fce2c70cd12659e4 ]

Free allocated vdev->msi_perm in error path.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci_config.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 115a36f6f4039..62023b4a373b4 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1180,8 +1180,10 @@ static int vfio_msi_cap_len(struct vfio_pci_device *vdev, u8 pos)
 		return -ENOMEM;
 
 	ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
-	if (ret)
+	if (ret) {
+		kfree(vdev->msi_perm);
 		return ret;
+	}
 
 	return len;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 125/191] vfio/pci: Mask buggy SR-IOV VF INTx support

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit db04264fe9bc0f2b62e036629f9afb530324b693 ]

The SR-IOV spec requires that VFs must report zero for the INTx pin
register as VFs are precluded from INTx support.  It's much easier for
the host kernel to understand whether a device is a VF and therefore
whether a non-zero pin register value is bogus than it is to do the
same in userspace.  Override the INTx count for such devices and
virtualize the pin register to provide a consistent view of the device
to the user.

As this is clearly a spec violation, warn about it to support hardware
validation, but also provide a known whitelist as it doesn't do much
good to continue complaining if the hardware vendor doesn't plan to
fix it.

Known devices with this issue: 8086:270c

Tested-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c        |  8 ++++++--
 drivers/vfio/pci/vfio_pci_config.c | 27 +++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index a92c2868d9021..0a6eb53e79fbf 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -443,10 +443,14 @@ static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
 {
 	if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
 		u8 pin;
+
+		if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) ||
+		    vdev->nointx || vdev->pdev->is_virtfn)
+			return 0;
+
 		pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
-		if (IS_ENABLED(CONFIG_VFIO_PCI_INTX) && !vdev->nointx && pin)
-			return 1;
 
+		return pin ? 1 : 0;
 	} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
 		u8 pos;
 		u16 flags;
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 62023b4a373b4..423ea1f98441a 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1611,6 +1611,15 @@ static int vfio_ecap_init(struct vfio_pci_device *vdev)
 	return 0;
 }
 
+/*
+ * Nag about hardware bugs, hopefully to have vendors fix them, but at least
+ * to collect a list of dependencies for the VF INTx pin quirk below.
+ */
+static const struct pci_device_id known_bogus_vf_intx_pin[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x270c) },
+	{}
+};
+
 /*
  * For each device we allocate a pci_config_map that indicates the
  * capability occupying each dword and thus the struct perm_bits we
@@ -1676,6 +1685,24 @@ int vfio_config_init(struct vfio_pci_device *vdev)
 	if (pdev->is_virtfn) {
 		*(__le16 *)&vconfig[PCI_VENDOR_ID] = cpu_to_le16(pdev->vendor);
 		*(__le16 *)&vconfig[PCI_DEVICE_ID] = cpu_to_le16(pdev->device);
+
+		/*
+		 * Per SR-IOV spec rev 1.1, 3.4.1.18 the interrupt pin register
+		 * does not apply to VFs and VFs must implement this register
+		 * as read-only with value zero.  Userspace is not readily able
+		 * to identify whether a device is a VF and thus that the pin
+		 * definition on the device is bogus should it violate this
+		 * requirement.  We already virtualize the pin register for
+		 * other purposes, so we simply need to replace the bogus value
+		 * and consider VFs when we determine INTx IRQ count.
+		 */
+		if (vconfig[PCI_INTERRUPT_PIN] &&
+		    !pci_match_id(known_bogus_vf_intx_pin, pdev))
+			pci_warn(pdev,
+				 "Hardware bug: VF reports bogus INTx pin %d\n",
+				 vconfig[PCI_INTERRUPT_PIN]);
+
+		vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */
 	}
 
 	if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx)
-- 
2.20.1

[PATCH AUTOSEL 4.19 126/191] iw_cxgb4: Use proper enumerated type in c4iw_bar2_addrs

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 1b571086e869395b6a11ab24186b0104fe05c057 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion
from enumeration type 'enum t4_bar2_qtype' to different enumeration type
'enum cxgb4_bar2_qtype' [-Wenum-conversion]
                                                 T4_BAR2_QTYPE_EGRESS,
                                                 ^~~~~~~~~~~~~~~~~~~~

c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the
corresponding values from that type so Clang is satisfied without changing
the meaning of the code.

T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0
T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/cq.c | 2 +-
 drivers/infiniband/hw/cxgb4/qp.c | 7 ++++---
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 6d30427940942..1fd8798d91a73 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -161,7 +161,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq,
 	cq->gts = rdev->lldi.gts_reg;
 	cq->rdev = rdev;
 
-	cq->bar2_va = c4iw_bar2_addrs(rdev, cq->cqid, T4_BAR2_QTYPE_INGRESS,
+	cq->bar2_va = c4iw_bar2_addrs(rdev, cq->cqid, CXGB4_BAR2_QTYPE_INGRESS,
 				      &cq->bar2_qid,
 				      user ? &cq->bar2_pa : NULL);
 	if (user && !cq->bar2_pa) {
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 347fe18b1a41c..a9e3a11bea54a 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -279,12 +279,13 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 
 	wq->db = rdev->lldi.db_reg;
 
-	wq->sq.bar2_va = c4iw_bar2_addrs(rdev, wq->sq.qid, T4_BAR2_QTYPE_EGRESS,
+	wq->sq.bar2_va = c4iw_bar2_addrs(rdev, wq->sq.qid,
+					 CXGB4_BAR2_QTYPE_EGRESS,
 					 &wq->sq.bar2_qid,
 					 user ? &wq->sq.bar2_pa : NULL);
 	if (need_rq)
 		wq->rq.bar2_va = c4iw_bar2_addrs(rdev, wq->rq.qid,
-						 T4_BAR2_QTYPE_EGRESS,
+						 CXGB4_BAR2_QTYPE_EGRESS,
 						 &wq->rq.bar2_qid,
 						 user ? &wq->rq.bar2_pa : NULL);
 
@@ -2572,7 +2573,7 @@ static int alloc_srq_queue(struct c4iw_srq *srq, struct c4iw_dev_ucontext *uctx,
 	memset(wq->queue, 0, wq->memsize);
 	pci_unmap_addr_set(wq, mapping, wq->dma_addr);
 
-	wq->bar2_va = c4iw_bar2_addrs(rdev, wq->qid, T4_BAR2_QTYPE_EGRESS,
+	wq->bar2_va = c4iw_bar2_addrs(rdev, wq->qid, CXGB4_BAR2_QTYPE_EGRESS,
 				      &wq->bar2_qid,
 			user ? &wq->bar2_pa : NULL);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 127/191] scsi: libsas: always unregister the old device if going to discover new

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ]

If we went into sas_rediscover_dev() the attached_sas_addr was already insured
not to be zero. So it's unnecessary to check if the attached_sas_addr is zero.

And although if the sas address is not changed, we always have to unregister
the old device when we are going to register a new one. We cannot just leave
the device there and bring up the new.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index b141d1061f38e..2ee9c4ec7a541 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -2062,14 +2062,11 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
 		return res;
 	}
 
-	/* delete the old link */
-	if (SAS_ADDR(phy->attached_sas_addr) &&
-	    SAS_ADDR(sas_addr) != SAS_ADDR(phy->attached_sas_addr)) {
-		SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
-			    SAS_ADDR(dev->sas_addr), phy_id,
-			    SAS_ADDR(phy->attached_sas_addr));
-		sas_unregister_devs_sas_addr(dev, phy_id, last);
-	}
+	/* we always have to delete the old device when we went here */
+	SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
+		    SAS_ADDR(dev->sas_addr), phy_id,
+		    SAS_ADDR(phy->attached_sas_addr));
+	sas_unregister_devs_sas_addr(dev, phy_id, last);
 
 	return sas_discover_new(dev, phy_id);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 128/191] f2fs: fix remount problem of option io_bits

[Sasha Levin]

From: Chengguang Xu <cgxu519@gmx.com>

[ Upstream commit c6b1867b1da3b1203b4c49988afeebdcbdf65499 ]

Currently we show mount option "io_bits=%u" as "io_size=%uKB",
it will cause option parsing problem(unrecognized mount option)
in remount.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index d9106bbe7df63..c3f07171a5ab9 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1336,7 +1336,8 @@ static int f2fs_show_options(struct seq_file *seq, struct dentry *root)
 				from_kgid_munged(&init_user_ns,
 					F2FS_OPTION(sbi).s_resgid));
 	if (F2FS_IO_SIZE_BITS(sbi))
-		seq_printf(seq, ",io_size=%uKB", F2FS_IO_SIZE_KB(sbi));
+		seq_printf(seq, ",io_bits=%u",
+				F2FS_OPTION(sbi).write_io_size_bits);
 #ifdef CONFIG_F2FS_FAULT_INJECTION
 	if (test_opt(sbi, FAULT_INJECTION)) {
 		seq_printf(seq, ",fault_injection=%u",
-- 
2.20.1

[PATCH AUTOSEL 4.19 129/191] phy: lantiq: Fix compile warning

[Sasha Levin]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit 3a00dae006623d799266d85f28b5f76ef07d6b6c ]

This local variable is unused, remove it.

Fixes: dea54fbad332 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/lantiq/phy-lantiq-rcu-usb2.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index 986224fca9e91..5a180f71d8d4d 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -156,7 +156,6 @@ static int ltq_rcu_usb2_of_parse(struct ltq_rcu_usb2_priv *priv,
 {
 	struct device *dev = priv->dev;
 	const __be32 *offset;
-	int ret;
 
 	priv->reg_bits = of_device_get_match_data(dev);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 130/191] ARM: dts: meson8b: odroidc1: enable the SAR ADC

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit fd6643142a0c5ab4d423ed7173a0be414d509214 ]

Odroid-C1 exposes ADC channels 0 and 1 on the GPIO headers. NOTE: Due
to the SoC design these are limited to 1.8V (instead of 3.3V like all
other pins).
Enable the SAR ADC to enable voltage measurements on these pins.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 8fdeeffecbdbc..8a09071d712a5 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -153,6 +153,11 @@
 	pinctrl-names = "default";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
 &sdio {
 	status = "okay";
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 131/191] arm64: dts: fsl: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit b739c177e1aeab532f355493439a1901b85be38c ]

dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi    | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi    | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 68ac78c4564dc..5da732f82fa0c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -337,7 +337,7 @@
 			status = "disabled";
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9ab..b9c0f2de8f12c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -284,7 +284,7 @@
 			interrupts = <0 43 0x4>;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -382,7 +382,7 @@
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		dspi0: dspi@2100000 {
+		dspi0: spi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -395,7 +395,7 @@
 			status = "disabled";
 		};
 
-		dspi1: dspi@2110000 {
+		dspi1: spi@2110000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d53..a59b48203688a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -57,12 +57,12 @@
 		reg = <0x4c>;
 	};
 
-	eeprom@56 {
+	eeprom@52 {
 		compatible = "atmel,24c512";
 		reg = <0x52>;
 	};
 
-	eeprom@57 {
+	eeprom@53 {
 		compatible = "atmel,24c512";
 		reg = <0x53>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b905..de6af453a6e16 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -202,7 +202,7 @@
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -361,7 +361,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 8cb78dd996728..ebe0cd4bf2b7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -469,7 +469,7 @@
 			mmu-masters = <&fsl_mc 0x300 0>;
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
@@ -595,7 +595,7 @@
 				  3 0 0x5 0x20000000 0x00010000>;
 		};
 
-		qspi: quadspi@20c0000 {
+		qspi: spi@20c0000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 132/191] ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 1c5f335f61ffb838fc3cc1cec9464067663eb8c8 ]

According to Documentation/devicetree/bindings/rtc/rtc-ds1307.txt the
original compatible "maxim,ds1341" is not a valid entry.

Switch to the documented "dallas,ds1341" compatible.

Reported-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 6e80254c4562a..3fb66ddfe93a5 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -514,7 +514,7 @@
 	};
 
 	ds1341: rtc@68 {
-		compatible = "maxim,ds1341";
+		compatible = "dallas,ds1341";
 		reg = <0x68>;
 	};
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Sasha Levin]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

[ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]

In order to allow the OS to reserve memory persistently across a
kexec, introduce a Linux-specific UEFI configuration table that
points to the head of a linked list in memory, allowing each kernel
to add list items describing memory regions that the next kernel
should treat as reserved.

This is useful, e.g., for GICv3 based ARM systems that cannot disable
DMA access to the LPI tables, forcing them to reuse the same memory
region again after a kexec reboot.

Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/efi.c | 27 ++++++++++++++++++++++++++-
 include/linux/efi.h        |  8 ++++++++
 2 files changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index d54fca902e64f..f265309859781 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -52,7 +52,8 @@ struct efi __read_mostly efi = {
 	.properties_table	= EFI_INVALID_TABLE_ADDR,
 	.mem_attr_table		= EFI_INVALID_TABLE_ADDR,
 	.rng_seed		= EFI_INVALID_TABLE_ADDR,
-	.tpm_log		= EFI_INVALID_TABLE_ADDR
+	.tpm_log		= EFI_INVALID_TABLE_ADDR,
+	.mem_reserve		= EFI_INVALID_TABLE_ADDR,
 };
 EXPORT_SYMBOL(efi);
 
@@ -487,6 +488,7 @@ static __initdata efi_config_table_type_t common_tables[] = {
 	{EFI_MEMORY_ATTRIBUTES_TABLE_GUID, "MEMATTR", &efi.mem_attr_table},
 	{LINUX_EFI_RANDOM_SEED_TABLE_GUID, "RNG", &efi.rng_seed},
 	{LINUX_EFI_TPM_EVENT_LOG_GUID, "TPMEventLog", &efi.tpm_log},
+	{LINUX_EFI_MEMRESERVE_TABLE_GUID, "MEMRESERVE", &efi.mem_reserve},
 	{NULL_GUID, NULL, NULL},
 };
 
@@ -594,6 +596,29 @@ int __init efi_config_parse_tables(void *config_tables, int count, int sz,
 		early_memunmap(tbl, sizeof(*tbl));
 	}
 
+	if (efi.mem_reserve != EFI_INVALID_TABLE_ADDR) {
+		unsigned long prsv = efi.mem_reserve;
+
+		while (prsv) {
+			struct linux_efi_memreserve *rsv;
+
+			/* reserve the entry itself */
+			memblock_reserve(prsv, sizeof(*rsv));
+
+			rsv = early_memremap(prsv, sizeof(*rsv));
+			if (rsv == NULL) {
+				pr_err("Could not map UEFI memreserve entry!\n");
+				return -ENOMEM;
+			}
+
+			if (rsv->size)
+				memblock_reserve(rsv->base, rsv->size);
+
+			prsv = rsv->next;
+			early_memunmap(rsv, sizeof(*rsv));
+		}
+	}
+
 	return 0;
 }
 
diff --git a/include/linux/efi.h b/include/linux/efi.h
index cc3391796c0b8..f43fc61fbe2c9 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -672,6 +672,7 @@ void efi_native_runtime_setup(void);
 #define LINUX_EFI_LOADER_ENTRY_GUID		EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf,  0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f)
 #define LINUX_EFI_RANDOM_SEED_TABLE_GUID	EFI_GUID(0x1ce1e5bc, 0x7ceb, 0x42f2,  0x81, 0xe5, 0x8a, 0xad, 0xf1, 0x80, 0xf5, 0x7b)
 #define LINUX_EFI_TPM_EVENT_LOG_GUID		EFI_GUID(0xb7799cb0, 0xeca2, 0x4943,  0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa)
+#define LINUX_EFI_MEMRESERVE_TABLE_GUID		EFI_GUID(0x888eb0c6, 0x8ede, 0x4ff5,  0xa8, 0xf0, 0x9a, 0xee, 0x5c, 0xb9, 0x77, 0xc2)
 
 typedef struct {
 	efi_guid_t guid;
@@ -957,6 +958,7 @@ extern struct efi {
 	unsigned long mem_attr_table;	/* memory attributes table */
 	unsigned long rng_seed;		/* UEFI firmware random seed */
 	unsigned long tpm_log;		/* TPM2 Event Log table */
+	unsigned long mem_reserve;	/* Linux EFI memreserve table */
 	efi_get_time_t *get_time;
 	efi_set_time_t *set_time;
 	efi_get_wakeup_time_t *get_wakeup_time;
@@ -1667,4 +1669,10 @@ extern int efi_tpm_eventlog_init(void);
 /* Workqueue to queue EFI Runtime Services */
 extern struct workqueue_struct *efi_rts_wq;
 
+struct linux_efi_memreserve {
+	phys_addr_t	next;
+	phys_addr_t	base;
+	phys_addr_t	size;
+};
+
 #endif /* _LINUX_EFI_H */
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Ard Biesheuvel]

On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>
> [ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]
>
> In order to allow the OS to reserve memory persistently across a
> kexec, introduce a Linux-specific UEFI configuration table that
> points to the head of a linked list in memory, allowing each kernel
> to add list items describing memory regions that the next kernel
> should treat as reserved.
>
> This is useful, e.g., for GICv3 based ARM systems that cannot disable
> DMA access to the LPI tables, forcing them to reuse the same memory
> region again after a kexec reboot.
>
> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

NAK

This doesn't belong in -stable, and I'd be interested in understanding
how this got autoselected, and how I can prevent this from happening
again in the future.


> ---
>  drivers/firmware/efi/efi.c | 27 ++++++++++++++++++++++++++-
>  include/linux/efi.h        |  8 ++++++++
>  2 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> index d54fca902e64f..f265309859781 100644
> --- a/drivers/firmware/efi/efi.c
> +++ b/drivers/firmware/efi/efi.c
> @@ -52,7 +52,8 @@ struct efi __read_mostly efi = {
>         .properties_table       = EFI_INVALID_TABLE_ADDR,
>         .mem_attr_table         = EFI_INVALID_TABLE_ADDR,
>         .rng_seed               = EFI_INVALID_TABLE_ADDR,
> -       .tpm_log                = EFI_INVALID_TABLE_ADDR
> +       .tpm_log                = EFI_INVALID_TABLE_ADDR,
> +       .mem_reserve            = EFI_INVALID_TABLE_ADDR,
>  };
>  EXPORT_SYMBOL(efi);
>
> @@ -487,6 +488,7 @@ static __initdata efi_config_table_type_t common_tables[] = {
>         {EFI_MEMORY_ATTRIBUTES_TABLE_GUID, "MEMATTR", &efi.mem_attr_table},
>         {LINUX_EFI_RANDOM_SEED_TABLE_GUID, "RNG", &efi.rng_seed},
>         {LINUX_EFI_TPM_EVENT_LOG_GUID, "TPMEventLog", &efi.tpm_log},
> +       {LINUX_EFI_MEMRESERVE_TABLE_GUID, "MEMRESERVE", &efi.mem_reserve},
>         {NULL_GUID, NULL, NULL},
>  };
>
> @@ -594,6 +596,29 @@ int __init efi_config_parse_tables(void *config_tables, int count, int sz,
>                 early_memunmap(tbl, sizeof(*tbl));
>         }
>
> +       if (efi.mem_reserve != EFI_INVALID_TABLE_ADDR) {
> +               unsigned long prsv = efi.mem_reserve;
> +
> +               while (prsv) {
> +                       struct linux_efi_memreserve *rsv;
> +
> +                       /* reserve the entry itself */
> +                       memblock_reserve(prsv, sizeof(*rsv));
> +
> +                       rsv = early_memremap(prsv, sizeof(*rsv));
> +                       if (rsv == NULL) {
> +                               pr_err("Could not map UEFI memreserve entry!\n");
> +                               return -ENOMEM;
> +                       }
> +
> +                       if (rsv->size)
> +                               memblock_reserve(rsv->base, rsv->size);
> +
> +                       prsv = rsv->next;
> +                       early_memunmap(rsv, sizeof(*rsv));
> +               }
> +       }
> +
>         return 0;
>  }
>
> diff --git a/include/linux/efi.h b/include/linux/efi.h
> index cc3391796c0b8..f43fc61fbe2c9 100644
> --- a/include/linux/efi.h
> +++ b/include/linux/efi.h
> @@ -672,6 +672,7 @@ void efi_native_runtime_setup(void);
>  #define LINUX_EFI_LOADER_ENTRY_GUID            EFI_GUID(0x4a67b082, 0x0a4c, 0x41cf,  0xb6, 0xc7, 0x44, 0x0b, 0x29, 0xbb, 0x8c, 0x4f)
>  #define LINUX_EFI_RANDOM_SEED_TABLE_GUID       EFI_GUID(0x1ce1e5bc, 0x7ceb, 0x42f2,  0x81, 0xe5, 0x8a, 0xad, 0xf1, 0x80, 0xf5, 0x7b)
>  #define LINUX_EFI_TPM_EVENT_LOG_GUID           EFI_GUID(0xb7799cb0, 0xeca2, 0x4943,  0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa)
> +#define LINUX_EFI_MEMRESERVE_TABLE_GUID                EFI_GUID(0x888eb0c6, 0x8ede, 0x4ff5,  0xa8, 0xf0, 0x9a, 0xee, 0x5c, 0xb9, 0x77, 0xc2)
>
>  typedef struct {
>         efi_guid_t guid;
> @@ -957,6 +958,7 @@ extern struct efi {
>         unsigned long mem_attr_table;   /* memory attributes table */
>         unsigned long rng_seed;         /* UEFI firmware random seed */
>         unsigned long tpm_log;          /* TPM2 Event Log table */
> +       unsigned long mem_reserve;      /* Linux EFI memreserve table */
>         efi_get_time_t *get_time;
>         efi_set_time_t *set_time;
>         efi_get_wakeup_time_t *get_wakeup_time;
> @@ -1667,4 +1669,10 @@ extern int efi_tpm_eventlog_init(void);
>  /* Workqueue to queue EFI Runtime Services */
>  extern struct workqueue_struct *efi_rts_wq;
>
> +struct linux_efi_memreserve {
> +       phys_addr_t     next;
> +       phys_addr_t     base;
> +       phys_addr_t     size;
> +};
> +
>  #endif /* _LINUX_EFI_H */
> --
> 2.20.1
>

Re: [PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Sasha Levin]

On Sun, Nov 10, 2019 at 08:33:47AM +0100, Ard Biesheuvel wrote:
>On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>>
>> [ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]
>>
>> In order to allow the OS to reserve memory persistently across a
>> kexec, introduce a Linux-specific UEFI configuration table that
>> points to the head of a linked list in memory, allowing each kernel
>> to add list items describing memory regions that the next kernel
>> should treat as reserved.
>>
>> This is useful, e.g., for GICv3 based ARM systems that cannot disable
>> DMA access to the LPI tables, forcing them to reuse the same memory
>> region again after a kexec reboot.
>>
>> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>NAK
>
>This doesn't belong in -stable, and I'd be interested in understanding
>how this got autoselected, and how I can prevent this from happening
>again in the future.

It was selected because it's part of a fix for a real issue reported by
users:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1806766

Besides ubuntu, it is also carried by:

SUSE: https://www.suse.com/support/update/announcement/2019/suse-su-20191530-1/
CentOS: https://koji.mbox.centos.org/koji/buildinfo?buildID=4558

As a way to resolve the reported bug.

Any reason this *shouldn't* be in stable? I'm aware that there might be
dependencies that are not obvious to me, but the solution here is to
take those dependencies as well rather than ignore the process
completely.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Ard Biesheuvel]

On Sun, 10 Nov 2019 at 13:27, Sasha Levin <sashal@kernel.org> wrote:
>
> On Sun, Nov 10, 2019 at 08:33:47AM +0100, Ard Biesheuvel wrote:
> >On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
> >>
> >> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >>
> >> [ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]
> >>
> >> In order to allow the OS to reserve memory persistently across a
> >> kexec, introduce a Linux-specific UEFI configuration table that
> >> points to the head of a linked list in memory, allowing each kernel
> >> to add list items describing memory regions that the next kernel
> >> should treat as reserved.
> >>
> >> This is useful, e.g., for GICv3 based ARM systems that cannot disable
> >> DMA access to the LPI tables, forcing them to reuse the same memory
> >> region again after a kexec reboot.
> >>
> >> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >> Signed-off-by: Sasha Levin <sashal@kernel.org>
> >
> >NAK
> >
> >This doesn't belong in -stable, and I'd be interested in understanding
> >how this got autoselected, and how I can prevent this from happening
> >again in the future.
>
> It was selected because it's part of a fix for a real issue reported by
> users:
>

For my understanding, are you saying your AI is reading launchpad bug
reports etc? Because it is marked AUTOSEL.

> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1806766
>

That pages mentions

"""
2 upstream patch series are required to fix this:
 https://<email address hidden>/msg10328.html
Which provides an EFI facility consumed by:
 https://lkml.org/lkml/2018/9/21/1066
There were also some follow-on fixes to deal with ARM-specific
problems associated with this usage:
 https://www.spinics.net/lists/arm-kernel/msg685751.html
"""

and without the other patches, we only add bugs and don't fix any.

> Besides ubuntu, it is also carried by:
>
> SUSE: https://www.suse.com/support/update/announcement/2019/suse-su-20191530-1/
> CentOS: https://koji.mbox.centos.org/koji/buildinfo?buildID=4558
>
> As a way to resolve the reported bug.
>

Backporting a feature/fix like this requires careful consideration of
the patches involved, and doing actual testing on hardware.

> Any reason this *shouldn't* be in stable?

Yes. By itself, it causes crashes at early boot and does not actually
solve the problem.

> I'm aware that there might be
> dependencies that are not obvious to me, but the solution here is to
> take those dependencies as well rather than ignore the process
> completely.
>

This is not a bugfix. kexec/kdump never worked correctly on the
hardware involved, and backporting a feature like that goes way beyond
what I am willing to accept for stable backports affecting the EFI
subsystem.

Re: [PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Sasha Levin]

On Sun, Nov 10, 2019 at 02:16:57PM +0000, Ard Biesheuvel wrote:
>On Sun, 10 Nov 2019 at 13:27, Sasha Levin <sashal@kernel.org> wrote:
>>
>> On Sun, Nov 10, 2019 at 08:33:47AM +0100, Ard Biesheuvel wrote:
>> >On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
>> >>
>> >> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> >>
>> >> [ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]
>> >>
>> >> In order to allow the OS to reserve memory persistently across a
>> >> kexec, introduce a Linux-specific UEFI configuration table that
>> >> points to the head of a linked list in memory, allowing each kernel
>> >> to add list items describing memory regions that the next kernel
>> >> should treat as reserved.
>> >>
>> >> This is useful, e.g., for GICv3 based ARM systems that cannot disable
>> >> DMA access to the LPI tables, forcing them to reuse the same memory
>> >> region again after a kexec reboot.
>> >>
>> >> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
>> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>> >> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> >
>> >NAK
>> >
>> >This doesn't belong in -stable, and I'd be interested in understanding
>> >how this got autoselected, and how I can prevent this from happening
>> >again in the future.
>>
>> It was selected because it's part of a fix for a real issue reported by
>> users:
>>
>
>For my understanding, are you saying your AI is reading launchpad bug
>reports etc? Because it is marked AUTOSEL.

Not quite. This review set was me feeding all the patches Ubuntu has on
top of stable trees into AUTOSEL, and sending out the output for review.
I doesn't look into launchpad bug reports on it's own, but in my
experience one can find a bug report for mostly everything AUTOSEL
considers to be a bug.

>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1806766
>>
>
>That pages mentions
>
>"""
>2 upstream patch series are required to fix this:
> https://<email address hidden>/msg10328.html
>Which provides an EFI facility consumed by:
> https://lkml.org/lkml/2018/9/21/1066
>There were also some follow-on fixes to deal with ARM-specific
>problems associated with this usage:
> https://www.spinics.net/lists/arm-kernel/msg685751.html
>"""
>
>and without the other patches, we only add bugs and don't fix any.
>
>> Besides ubuntu, it is also carried by:
>>
>> SUSE: https://www.suse.com/support/update/announcement/2019/suse-su-20191530-1/
>> CentOS: https://koji.mbox.centos.org/koji/buildinfo?buildID=4558
>>
>> As a way to resolve the reported bug.
>>
>
>Backporting a feature/fix like this requires careful consideration of
>the patches involved, and doing actual testing on hardware.
>
>> Any reason this *shouldn't* be in stable?
>
>Yes. By itself, it causes crashes at early boot and does not actually
>solve the problem.

Sure, let's work on gathering all the needed patches then and testing it
out.

>> I'm aware that there might be
>> dependencies that are not obvious to me, but the solution here is to
>> take those dependencies as well rather than ignore the process
>> completely.
>>
>
>This is not a bugfix. kexec/kdump never worked correctly on the
>hardware involved, and backporting a feature like that goes way beyond
>what I am willing to accept for stable backports affecting the EFI
>subsystem.

I'm a bit confused. The bug report starts with:

	[Impact]
	kdump support isn't usable on HiSilicon D05 systems. This
	previously worked in bionic.

So it seems like it did use to work, but not anymore?

Either way, I understand that you want to keep the stable tree
conservative, but keep in mind that the flip side of not taking fixes
that users ask for means that distros end up having to carry them
anyway, which means that they don't get the review and testing they
need.

We can argue all we want around whether it's a fix or not, but if most
distros carry it then I think our argument is moot.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Ard Biesheuvel]

(adding Marc, the GIC maintainer)

On Sun, 10 Nov 2019 at 15:57, Sasha Levin <sashal@kernel.org> wrote:
>
> On Sun, Nov 10, 2019 at 02:16:57PM +0000, Ard Biesheuvel wrote:
> >On Sun, 10 Nov 2019 at 13:27, Sasha Levin <sashal@kernel.org> wrote:
> >>
> >> On Sun, Nov 10, 2019 at 08:33:47AM +0100, Ard Biesheuvel wrote:
> >> >On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
> >> >>
> >> >> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >> >>
> >> >> [ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]
> >> >>
> >> >> In order to allow the OS to reserve memory persistently across a
> >> >> kexec, introduce a Linux-specific UEFI configuration table that
> >> >> points to the head of a linked list in memory, allowing each kernel
> >> >> to add list items describing memory regions that the next kernel
> >> >> should treat as reserved.
> >> >>
> >> >> This is useful, e.g., for GICv3 based ARM systems that cannot disable
> >> >> DMA access to the LPI tables, forcing them to reuse the same memory
> >> >> region again after a kexec reboot.
> >> >>
> >> >> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
> >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> >> >> Signed-off-by: Sasha Levin <sashal@kernel.org>
> >> >
> >> >NAK
> >> >
> >> >This doesn't belong in -stable, and I'd be interested in understanding
> >> >how this got autoselected, and how I can prevent this from happening
> >> >again in the future.
> >>
> >> It was selected because it's part of a fix for a real issue reported by
> >> users:
> >>
> >
> >For my understanding, are you saying your AI is reading launchpad bug
> >reports etc? Because it is marked AUTOSEL.
>
> Not quite. This review set was me feeding all the patches Ubuntu has on
> top of stable trees into AUTOSEL, and sending out the output for review.
> I doesn't look into launchpad bug reports on it's own, but in my
> experience one can find a bug report for mostly everything AUTOSEL
> considers to be a bug.
>

So the assumption is that taking an arbitrary subset of what Ubuntu
backported (and tested extensively), and letting that subset be chosen
by a bot is a process that improves the quality of stable trees? I'm
rather skeptical of that tbh.

> >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1806766
> >>
> >
> >That pages mentions
> >
> >"""
> >2 upstream patch series are required to fix this:
> > https://<email address hidden>/msg10328.html
> >Which provides an EFI facility consumed by:
> > https://lkml.org/lkml/2018/9/21/1066
> >There were also some follow-on fixes to deal with ARM-specific
> >problems associated with this usage:
> > https://www.spinics.net/lists/arm-kernel/msg685751.html
> >"""
> >
> >and without the other patches, we only add bugs and don't fix any.
> >
> >> Besides ubuntu, it is also carried by:
> >>
> >> SUSE: https://www.suse.com/support/update/announcement/2019/suse-su-20191530-1/
> >> CentOS: https://koji.mbox.centos.org/koji/buildinfo?buildID=4558
> >>
> >> As a way to resolve the reported bug.
> >>
> >
> >Backporting a feature/fix like this requires careful consideration of
> >the patches involved, and doing actual testing on hardware.
> >
> >> Any reason this *shouldn't* be in stable?
> >
> >Yes. By itself, it causes crashes at early boot and does not actually
> >solve the problem.
>
> Sure, let's work on gathering all the needed patches then and testing it
> out.
>

No, let's not. This is a feature that was introduced to address a
shortcoming in some hardware that makes kexec/kdump problematic on
them. If you want kexec/kdump on that hardware, use a newer kernel.

> >> I'm aware that there might be
> >> dependencies that are not obvious to me, but the solution here is to
> >> take those dependencies as well rather than ignore the process
> >> completely.
> >>
> >
> >This is not a bugfix. kexec/kdump never worked correctly on the
> >hardware involved, and backporting a feature like that goes way beyond
> >what I am willing to accept for stable backports affecting the EFI
> >subsystem.
>
> I'm a bit confused. The bug report starts with:
>
>         [Impact]
>         kdump support isn't usable on HiSilicon D05 systems. This
>         previously worked in bionic.
>
> So it seems like it did use to work, but not anymore?
>

I have no idea what Ubuntu shipped in the previous kernel, but
labelling this as a software regression is dubious at least, and
wholly inaccurate for upstream.

> Either way, I understand that you want to keep the stable tree
> conservative, but keep in mind that the flip side of not taking fixes
> that users ask for means that distros end up having to carry them
> anyway, which means that they don't get the review and testing they
> need.
>

I'd say it is the opposite. At least the distros test their backports
on actual hardware. Taking any part of this set without testing it by
doing kexec/kdump on an affected ARM system, and regression testing it
on the hardware that got broken by it (with hundreds of cores IIRC) is
totally irresponsible, and I don't have the time or the hardware to do
the testing.

> We can argue all we want around whether it's a fix or not, but if most
> distros carry it then I think our argument is moot.
>

If someone cares enough to backport these as a coherent set, with boot
tests on the affected hardware etc, then I am not going to object.

Re: [PATCH AUTOSEL 4.19 133/191] efi: honour memory reservations passed via a linux specific config table

[Marc Zyngier]

On Sun, 10 Nov 2019 16:26:15 +0000,
Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> 
> (adding Marc, the GIC maintainer)
> 
> On Sun, 10 Nov 2019 at 15:57, Sasha Levin <sashal@kernel.org> wrote:
> >
> > On Sun, Nov 10, 2019 at 02:16:57PM +0000, Ard Biesheuvel wrote:
> > >On Sun, 10 Nov 2019 at 13:27, Sasha Levin <sashal@kernel.org> wrote:
> > >>
> > >> On Sun, Nov 10, 2019 at 08:33:47AM +0100, Ard Biesheuvel wrote:
> > >> >On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
> > >> >>
> > >> >> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > >> >>
> > >> >> [ Upstream commit 71e0940d52e107748b270213a01d3b1546657d74 ]
> > >> >>
> > >> >> In order to allow the OS to reserve memory persistently across a
> > >> >> kexec, introduce a Linux-specific UEFI configuration table that
> > >> >> points to the head of a linked list in memory, allowing each kernel
> > >> >> to add list items describing memory regions that the next kernel
> > >> >> should treat as reserved.
> > >> >>
> > >> >> This is useful, e.g., for GICv3 based ARM systems that cannot disable
> > >> >> DMA access to the LPI tables, forcing them to reuse the same memory
> > >> >> region again after a kexec reboot.
> > >> >>
> > >> >> Tested-by: Jeremy Linton <jeremy.linton@arm.com>
> > >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > >> >> Signed-off-by: Sasha Levin <sashal@kernel.org>
> > >> >
> > >> >NAK
> > >> >
> > >> >This doesn't belong in -stable, and I'd be interested in understanding
> > >> >how this got autoselected, and how I can prevent this from happening
> > >> >again in the future.
> > >>
> > >> It was selected because it's part of a fix for a real issue reported by
> > >> users:
> > >>
> > >
> > >For my understanding, are you saying your AI is reading launchpad bug
> > >reports etc? Because it is marked AUTOSEL.
> >
> > Not quite. This review set was me feeding all the patches Ubuntu has on
> > top of stable trees into AUTOSEL, and sending out the output for review.
> > I doesn't look into launchpad bug reports on it's own, but in my
> > experience one can find a bug report for mostly everything AUTOSEL
> > considers to be a bug.
> >
> 
> So the assumption is that taking an arbitrary subset of what Ubuntu
> backported (and tested extensively), and letting that subset be chosen
> by a bot is a process that improves the quality of stable trees? I'm
> rather skeptical of that tbh.
> 
> > >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1806766
> > >>
> > >
> > >That pages mentions
> > >
> > >"""
> > >2 upstream patch series are required to fix this:
> > > https://<email address hidden>/msg10328.html
> > >Which provides an EFI facility consumed by:
> > > https://lkml.org/lkml/2018/9/21/1066
> > >There were also some follow-on fixes to deal with ARM-specific
> > >problems associated with this usage:
> > > https://www.spinics.net/lists/arm-kernel/msg685751.html
> > >"""
> > >
> > >and without the other patches, we only add bugs and don't fix any.
> > >
> > >> Besides ubuntu, it is also carried by:
> > >>
> > >> SUSE: https://www.suse.com/support/update/announcement/2019/suse-su-20191530-1/
> > >> CentOS: https://koji.mbox.centos.org/koji/buildinfo?buildID=4558
> > >>
> > >> As a way to resolve the reported bug.
> > >>
> > >
> > >Backporting a feature/fix like this requires careful consideration of
> > >the patches involved, and doing actual testing on hardware.
> > >
> > >> Any reason this *shouldn't* be in stable?
> > >
> > >Yes. By itself, it causes crashes at early boot and does not actually
> > >solve the problem.
> >
> > Sure, let's work on gathering all the needed patches then and testing it
> > out.
> >
> 
> No, let's not. This is a feature that was introduced to address a
> shortcoming in some hardware that makes kexec/kdump problematic on
> them. If you want kexec/kdump on that hardware, use a newer kernel.

That's my position as well. This isn't a bug fix at all, but a
workaround for a HW defect with complex dependencies. It wasn't cc'd
stable for good reasons, and I wish stable maintainers would respect
this decision.

> > >> I'm aware that there might be
> > >> dependencies that are not obvious to me, but the solution here is to
> > >> take those dependencies as well rather than ignore the process
> > >> completely.
> > >>
> > >
> > >This is not a bugfix. kexec/kdump never worked correctly on the
> > >hardware involved, and backporting a feature like that goes way beyond
> > >what I am willing to accept for stable backports affecting the EFI
> > >subsystem.
> >
> > I'm a bit confused. The bug report starts with:
> >
> >         [Impact]
> >         kdump support isn't usable on HiSilicon D05 systems. This
> >         previously worked in bionic.
> >
> > So it seems like it did use to work, but not anymore?
> >
> 
> I have no idea what Ubuntu shipped in the previous kernel, but
> labelling this as a software regression is dubious at least, and
> wholly inaccurate for upstream.

I have this exact machine keeping my feet warm, and kexec never worked
on it (nor on any GICv3 machine that is LPI-capable) before we added
this workaround.  Whatever distros carried as hacks to make it work at
the time, I don't want to know. What is more likely is that they always
kexec'd a kernel with the exact same allocation layout and that it
worked by luck (or maybe resulted in silent memory corruption).

If anything, I'd merge a patch *disabling* kexec altogether on these
systems, because pretending that it ever worked is a damn lie.

> > Either way, I understand that you want to keep the stable tree
> > conservative, but keep in mind that the flip side of not taking fixes
> > that users ask for means that distros end up having to carry them
> > anyway, which means that they don't get the review and testing they
> > need.
> >
> 
> I'd say it is the opposite. At least the distros test their backports
> on actual hardware. Taking any part of this set without testing it by
> doing kexec/kdump on an affected ARM system, and regression testing it
> on the hardware that got broken by it (with hundreds of cores IIRC) is
> totally irresponsible, and I don't have the time or the hardware to do
> the testing.
> 
> > We can argue all we want around whether it's a fix or not, but if most
> > distros carry it then I think our argument is moot.
> >
> 
> If someone cares enough to backport these as a coherent set, with boot
> tests on the affected hardware etc, then I am not going to object.

Ideally, I'd like the distros to test these backports, because only them
have access to the variety of HW that's required. But they'd have to
majorly up their game, if the above is anything to go by...

Thanks,

	M.

-- 
Jazz is not dead, it just smells funny.

[PATCH AUTOSEL 4.19 134/191] efi: Make efi_rts_work accessible to efi page fault handler

[Sasha Levin]

From: Sai Praneeth <sai.praneeth.prakhya@intel.com>

[ Upstream commit 9dbbedaa6171247c4c7c40b83f05b200a117c2e0 ]

After the kernel has booted, if any accesses by firmware causes a page
fault, the efi page fault handler would freeze efi_rts_wq and schedules
a new process. To do this, the efi page fault handler needs
efi_rts_work. Hence, make it accessible.

There will be no race conditions in accessing this structure, because
all the calls to efi runtime services are already serialized.

Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/runtime-wrappers.c | 53 +++++--------------------
 include/linux/efi.h                     | 36 +++++++++++++++++
 2 files changed, 45 insertions(+), 44 deletions(-)

diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 1606abead22cc..b31e3d3729a6d 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -45,39 +45,7 @@
 #define __efi_call_virt(f, args...) \
 	__efi_call_virt_pointer(efi.systab->runtime, f, args)
 
-/* efi_runtime_service() function identifiers */
-enum efi_rts_ids {
-	GET_TIME,
-	SET_TIME,
-	GET_WAKEUP_TIME,
-	SET_WAKEUP_TIME,
-	GET_VARIABLE,
-	GET_NEXT_VARIABLE,
-	SET_VARIABLE,
-	QUERY_VARIABLE_INFO,
-	GET_NEXT_HIGH_MONO_COUNT,
-	UPDATE_CAPSULE,
-	QUERY_CAPSULE_CAPS,
-};
-
-/*
- * efi_runtime_work:	Details of EFI Runtime Service work
- * @arg<1-5>:		EFI Runtime Service function arguments
- * @status:		Status of executing EFI Runtime Service
- * @efi_rts_id:		EFI Runtime Service function identifier
- * @efi_rts_comp:	Struct used for handling completions
- */
-struct efi_runtime_work {
-	void *arg1;
-	void *arg2;
-	void *arg3;
-	void *arg4;
-	void *arg5;
-	efi_status_t status;
-	struct work_struct work;
-	enum efi_rts_ids efi_rts_id;
-	struct completion efi_rts_comp;
-};
+struct efi_runtime_work efi_rts_work;
 
 /*
  * efi_queue_work:	Queue efi_runtime_service() and wait until it's done
@@ -91,7 +59,6 @@ struct efi_runtime_work {
  */
 #define efi_queue_work(_rts, _arg1, _arg2, _arg3, _arg4, _arg5)		\
 ({									\
-	struct efi_runtime_work efi_rts_work;				\
 	efi_rts_work.status = EFI_ABORTED;				\
 									\
 	init_completion(&efi_rts_work.efi_rts_comp);			\
@@ -191,18 +158,16 @@ extern struct semaphore __efi_uv_runtime_lock __alias(efi_runtime_lock);
  */
 static void efi_call_rts(struct work_struct *work)
 {
-	struct efi_runtime_work *efi_rts_work;
 	void *arg1, *arg2, *arg3, *arg4, *arg5;
 	efi_status_t status = EFI_NOT_FOUND;
 
-	efi_rts_work = container_of(work, struct efi_runtime_work, work);
-	arg1 = efi_rts_work->arg1;
-	arg2 = efi_rts_work->arg2;
-	arg3 = efi_rts_work->arg3;
-	arg4 = efi_rts_work->arg4;
-	arg5 = efi_rts_work->arg5;
+	arg1 = efi_rts_work.arg1;
+	arg2 = efi_rts_work.arg2;
+	arg3 = efi_rts_work.arg3;
+	arg4 = efi_rts_work.arg4;
+	arg5 = efi_rts_work.arg5;
 
-	switch (efi_rts_work->efi_rts_id) {
+	switch (efi_rts_work.efi_rts_id) {
 	case GET_TIME:
 		status = efi_call_virt(get_time, (efi_time_t *)arg1,
 				       (efi_time_cap_t *)arg2);
@@ -260,8 +225,8 @@ static void efi_call_rts(struct work_struct *work)
 		 */
 		pr_err("Requested executing invalid EFI Runtime Service.\n");
 	}
-	efi_rts_work->status = status;
-	complete(&efi_rts_work->efi_rts_comp);
+	efi_rts_work.status = status;
+	complete(&efi_rts_work.efi_rts_comp);
 }
 
 static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
diff --git a/include/linux/efi.h b/include/linux/efi.h
index f43fc61fbe2c9..9d4c25090fd04 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1666,6 +1666,42 @@ struct linux_efi_tpm_eventlog {
 
 extern int efi_tpm_eventlog_init(void);
 
+/* efi_runtime_service() function identifiers */
+enum efi_rts_ids {
+	GET_TIME,
+	SET_TIME,
+	GET_WAKEUP_TIME,
+	SET_WAKEUP_TIME,
+	GET_VARIABLE,
+	GET_NEXT_VARIABLE,
+	SET_VARIABLE,
+	QUERY_VARIABLE_INFO,
+	GET_NEXT_HIGH_MONO_COUNT,
+	UPDATE_CAPSULE,
+	QUERY_CAPSULE_CAPS,
+};
+
+/*
+ * efi_runtime_work:	Details of EFI Runtime Service work
+ * @arg<1-5>:		EFI Runtime Service function arguments
+ * @status:		Status of executing EFI Runtime Service
+ * @efi_rts_id:		EFI Runtime Service function identifier
+ * @efi_rts_comp:	Struct used for handling completions
+ */
+struct efi_runtime_work {
+	void *arg1;
+	void *arg2;
+	void *arg3;
+	void *arg4;
+	void *arg5;
+	efi_status_t status;
+	struct work_struct work;
+	enum efi_rts_ids efi_rts_id;
+	struct completion efi_rts_comp;
+};
+
+extern struct efi_runtime_work efi_rts_work;
+
 /* Workqueue to queue EFI Runtime Services */
 extern struct workqueue_struct *efi_rts_wq;
 
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 134/191] efi: Make efi_rts_work accessible to efi page fault handler

[Ard Biesheuvel]

On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
>
> [ Upstream commit 9dbbedaa6171247c4c7c40b83f05b200a117c2e0 ]
>
> After the kernel has booted, if any accesses by firmware causes a page
> fault, the efi page fault handler would freeze efi_rts_wq and schedules
> a new process. To do this, the efi page fault handler needs
> efi_rts_work. Hence, make it accessible.
>
> There will be no race conditions in accessing this structure, because
> all the calls to efi runtime services are already serialized.
>
> Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
> Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
> Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

NAK

Would it be possible to disregard all EFI patches for -stable unless
they have a fixes tag? EFI subtly depends on lots of firmware quirks
across various architectures, and so grabbing random patches and
backporting them is really not a good idea in general.

> ---
>  drivers/firmware/efi/runtime-wrappers.c | 53 +++++--------------------
>  include/linux/efi.h                     | 36 +++++++++++++++++
>  2 files changed, 45 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
> index 1606abead22cc..b31e3d3729a6d 100644
> --- a/drivers/firmware/efi/runtime-wrappers.c
> +++ b/drivers/firmware/efi/runtime-wrappers.c
> @@ -45,39 +45,7 @@
>  #define __efi_call_virt(f, args...) \
>         __efi_call_virt_pointer(efi.systab->runtime, f, args)
>
> -/* efi_runtime_service() function identifiers */
> -enum efi_rts_ids {
> -       GET_TIME,
> -       SET_TIME,
> -       GET_WAKEUP_TIME,
> -       SET_WAKEUP_TIME,
> -       GET_VARIABLE,
> -       GET_NEXT_VARIABLE,
> -       SET_VARIABLE,
> -       QUERY_VARIABLE_INFO,
> -       GET_NEXT_HIGH_MONO_COUNT,
> -       UPDATE_CAPSULE,
> -       QUERY_CAPSULE_CAPS,
> -};
> -
> -/*
> - * efi_runtime_work:   Details of EFI Runtime Service work
> - * @arg<1-5>:          EFI Runtime Service function arguments
> - * @status:            Status of executing EFI Runtime Service
> - * @efi_rts_id:                EFI Runtime Service function identifier
> - * @efi_rts_comp:      Struct used for handling completions
> - */
> -struct efi_runtime_work {
> -       void *arg1;
> -       void *arg2;
> -       void *arg3;
> -       void *arg4;
> -       void *arg5;
> -       efi_status_t status;
> -       struct work_struct work;
> -       enum efi_rts_ids efi_rts_id;
> -       struct completion efi_rts_comp;
> -};
> +struct efi_runtime_work efi_rts_work;
>
>  /*
>   * efi_queue_work:     Queue efi_runtime_service() and wait until it's done
> @@ -91,7 +59,6 @@ struct efi_runtime_work {
>   */
>  #define efi_queue_work(_rts, _arg1, _arg2, _arg3, _arg4, _arg5)                \
>  ({                                                                     \
> -       struct efi_runtime_work efi_rts_work;                           \
>         efi_rts_work.status = EFI_ABORTED;                              \
>                                                                         \
>         init_completion(&efi_rts_work.efi_rts_comp);                    \
> @@ -191,18 +158,16 @@ extern struct semaphore __efi_uv_runtime_lock __alias(efi_runtime_lock);
>   */
>  static void efi_call_rts(struct work_struct *work)
>  {
> -       struct efi_runtime_work *efi_rts_work;
>         void *arg1, *arg2, *arg3, *arg4, *arg5;
>         efi_status_t status = EFI_NOT_FOUND;
>
> -       efi_rts_work = container_of(work, struct efi_runtime_work, work);
> -       arg1 = efi_rts_work->arg1;
> -       arg2 = efi_rts_work->arg2;
> -       arg3 = efi_rts_work->arg3;
> -       arg4 = efi_rts_work->arg4;
> -       arg5 = efi_rts_work->arg5;
> +       arg1 = efi_rts_work.arg1;
> +       arg2 = efi_rts_work.arg2;
> +       arg3 = efi_rts_work.arg3;
> +       arg4 = efi_rts_work.arg4;
> +       arg5 = efi_rts_work.arg5;
>
> -       switch (efi_rts_work->efi_rts_id) {
> +       switch (efi_rts_work.efi_rts_id) {
>         case GET_TIME:
>                 status = efi_call_virt(get_time, (efi_time_t *)arg1,
>                                        (efi_time_cap_t *)arg2);
> @@ -260,8 +225,8 @@ static void efi_call_rts(struct work_struct *work)
>                  */
>                 pr_err("Requested executing invalid EFI Runtime Service.\n");
>         }
> -       efi_rts_work->status = status;
> -       complete(&efi_rts_work->efi_rts_comp);
> +       efi_rts_work.status = status;
> +       complete(&efi_rts_work.efi_rts_comp);
>  }
>
>  static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
> diff --git a/include/linux/efi.h b/include/linux/efi.h
> index f43fc61fbe2c9..9d4c25090fd04 100644
> --- a/include/linux/efi.h
> +++ b/include/linux/efi.h
> @@ -1666,6 +1666,42 @@ struct linux_efi_tpm_eventlog {
>
>  extern int efi_tpm_eventlog_init(void);
>
> +/* efi_runtime_service() function identifiers */
> +enum efi_rts_ids {
> +       GET_TIME,
> +       SET_TIME,
> +       GET_WAKEUP_TIME,
> +       SET_WAKEUP_TIME,
> +       GET_VARIABLE,
> +       GET_NEXT_VARIABLE,
> +       SET_VARIABLE,
> +       QUERY_VARIABLE_INFO,
> +       GET_NEXT_HIGH_MONO_COUNT,
> +       UPDATE_CAPSULE,
> +       QUERY_CAPSULE_CAPS,
> +};
> +
> +/*
> + * efi_runtime_work:   Details of EFI Runtime Service work
> + * @arg<1-5>:          EFI Runtime Service function arguments
> + * @status:            Status of executing EFI Runtime Service
> + * @efi_rts_id:                EFI Runtime Service function identifier
> + * @efi_rts_comp:      Struct used for handling completions
> + */
> +struct efi_runtime_work {
> +       void *arg1;
> +       void *arg2;
> +       void *arg3;
> +       void *arg4;
> +       void *arg5;
> +       efi_status_t status;
> +       struct work_struct work;
> +       enum efi_rts_ids efi_rts_id;
> +       struct completion efi_rts_comp;
> +};
> +
> +extern struct efi_runtime_work efi_rts_work;
> +
>  /* Workqueue to queue EFI Runtime Services */
>  extern struct workqueue_struct *efi_rts_wq;
>
> --
> 2.20.1
>

[PATCH AUTOSEL 4.19 135/191] efi/x86: Handle page faults occurring while running EFI runtime services

[Sasha Levin]

From: Sai Praneeth <sai.praneeth.prakhya@intel.com>

[ Upstream commit 3425d934fc0312f62024163736a7afe4de20c10f ]

Memory accesses performed by UEFI runtime services should be limited to:
- reading/executing from EFI_RUNTIME_SERVICES_CODE memory regions
- reading/writing from/to EFI_RUNTIME_SERVICES_DATA memory regions
- reading/writing by-ref arguments
- reading/writing from/to the stack.

Accesses outside these regions may cause the kernel to hang because the
memory region requested by the firmware isn't mapped in efi_pgd, which
causes a page fault in ring 0 and the kernel fails to handle it, leading
to die(). To save kernel from hanging, add an EFI specific page fault
handler which recovers from such faults by
1. If the efi runtime service is efi_reset_system(), reboot the machine
   through BIOS.
2. If the efi runtime service is _not_ efi_reset_system(), then freeze
   efi_rts_wq and schedule a new process.

The EFI page fault handler offers us two advantages:
1. Avoid potential hangs caused by buggy firmware.
2. Shout loud that the firmware is buggy and hence is not a kernel bug.

Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[ardb: clarify commit log]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/efi.h              |  1 +
 arch/x86/mm/fault.c                     |  9 +++
 arch/x86/platform/efi/quirks.c          | 78 +++++++++++++++++++++++++
 drivers/firmware/efi/runtime-wrappers.c |  8 +++
 include/linux/efi.h                     |  8 ++-
 5 files changed, 103 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index baa549f8e9188..45864898f7e50 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -138,6 +138,7 @@ extern void __init efi_apply_memmap_quirks(void);
 extern int __init efi_reuse_config(u64 tables, int nr_tables);
 extern void efi_delete_dummy_variable(void);
 extern void efi_switch_mm(struct mm_struct *mm);
+extern void efi_recover_from_page_fault(unsigned long phys_addr);
 
 struct efi_setup_data {
 	u64 fw_vendor;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 1bcb7242ad79a..53e69c7c5cd18 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/prefetch.h>		/* prefetchw			*/
 #include <linux/context_tracking.h>	/* exception_enter(), ...	*/
 #include <linux/uaccess.h>		/* faulthandler_disabled()	*/
+#include <linux/efi.h>			/* efi_recover_from_page_fault()*/
 #include <linux/mm_types.h>
 
 #include <asm/cpufeature.h>		/* boot_cpu_has, ...		*/
@@ -25,6 +26,7 @@
 #include <asm/vsyscall.h>		/* emulate_vsyscall		*/
 #include <asm/vm86.h>			/* struct vm86			*/
 #include <asm/mmu_context.h>		/* vma_pkey()			*/
+#include <asm/efi.h>			/* efi_recover_from_page_fault()*/
 
 #define CREATE_TRACE_POINTS
 #include <asm/trace/exceptions.h>
@@ -783,6 +785,13 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	if (is_errata93(regs, address))
 		return;
 
+	/*
+	 * Buggy firmware could access regions which might page fault, try to
+	 * recover from such faults.
+	 */
+	if (IS_ENABLED(CONFIG_EFI))
+		efi_recover_from_page_fault(address);
+
 	/*
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice:
diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 844d31cb8a0c7..669babcaf245a 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -16,6 +16,7 @@
 #include <asm/efi.h>
 #include <asm/uv/uv.h>
 #include <asm/cpu_device_id.h>
+#include <asm/reboot.h>
 
 #define EFI_MIN_RESERVE 5120
 
@@ -654,3 +655,80 @@ int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
 }
 
 #endif
+
+/*
+ * If any access by any efi runtime service causes a page fault, then,
+ * 1. If it's efi_reset_system(), reboot through BIOS.
+ * 2. If any other efi runtime service, then
+ *    a. Return error status to the efi caller process.
+ *    b. Disable EFI Runtime Services forever and
+ *    c. Freeze efi_rts_wq and schedule new process.
+ *
+ * @return: Returns, if the page fault is not handled. This function
+ * will never return if the page fault is handled successfully.
+ */
+void efi_recover_from_page_fault(unsigned long phys_addr)
+{
+	if (!IS_ENABLED(CONFIG_X86_64))
+		return;
+
+	/*
+	 * Make sure that an efi runtime service caused the page fault.
+	 * "efi_mm" cannot be used to check if the page fault had occurred
+	 * in the firmware context because efi=old_map doesn't use efi_pgd.
+	 */
+	if (efi_rts_work.efi_rts_id == NONE)
+		return;
+
+	/*
+	 * Address range 0x0000 - 0x0fff is always mapped in the efi_pgd, so
+	 * page faulting on these addresses isn't expected.
+	 */
+	if (phys_addr >= 0x0000 && phys_addr <= 0x0fff)
+		return;
+
+	/*
+	 * Print stack trace as it might be useful to know which EFI Runtime
+	 * Service is buggy.
+	 */
+	WARN(1, FW_BUG "Page fault caused by firmware at PA: 0x%lx\n",
+	     phys_addr);
+
+	/*
+	 * Buggy efi_reset_system() is handled differently from other EFI
+	 * Runtime Services as it doesn't use efi_rts_wq. Although,
+	 * native_machine_emergency_restart() says that machine_real_restart()
+	 * could fail, it's better not to compilcate this fault handler
+	 * because this case occurs *very* rarely and hence could be improved
+	 * on a need by basis.
+	 */
+	if (efi_rts_work.efi_rts_id == RESET_SYSTEM) {
+		pr_info("efi_reset_system() buggy! Reboot through BIOS\n");
+		machine_real_restart(MRR_BIOS);
+		return;
+	}
+
+	/*
+	 * Before calling EFI Runtime Service, the kernel has switched the
+	 * calling process to efi_mm. Hence, switch back to task_mm.
+	 */
+	arch_efi_call_virt_teardown();
+
+	/* Signal error status to the efi caller process */
+	efi_rts_work.status = EFI_ABORTED;
+	complete(&efi_rts_work.efi_rts_comp);
+
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+	pr_info("Froze efi_rts_wq and disabled EFI Runtime Services\n");
+
+	/*
+	 * Call schedule() in an infinite loop, so that any spurious wake ups
+	 * will never run efi_rts_wq again.
+	 */
+	for (;;) {
+		set_current_state(TASK_IDLE);
+		schedule();
+	}
+
+	return;
+}
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index b31e3d3729a6d..e2abfdb5cee6a 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -61,6 +61,11 @@ struct efi_runtime_work efi_rts_work;
 ({									\
 	efi_rts_work.status = EFI_ABORTED;				\
 									\
+	if (!efi_enabled(EFI_RUNTIME_SERVICES)) {			\
+		pr_warn_once("EFI Runtime Services are disabled!\n");	\
+		goto exit;						\
+	}								\
+									\
 	init_completion(&efi_rts_work.efi_rts_comp);			\
 	INIT_WORK(&efi_rts_work.work, efi_call_rts);			\
 	efi_rts_work.arg1 = _arg1;					\
@@ -79,6 +84,8 @@ struct efi_runtime_work efi_rts_work;
 	else								\
 		pr_err("Failed to queue work to efi_rts_wq.\n");	\
 									\
+exit:									\
+	efi_rts_work.efi_rts_id = NONE;					\
 	efi_rts_work.status;						\
 })
 
@@ -400,6 +407,7 @@ static void virt_efi_reset_system(int reset_type,
 			"could not get exclusive access to the firmware\n");
 		return;
 	}
+	efi_rts_work.efi_rts_id = RESET_SYSTEM;
 	__efi_call_virt(reset_system, reset_type, status, data_size, data);
 	up(&efi_runtime_lock);
 }
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 9d4c25090fd04..9a86f467b8911 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1666,8 +1666,13 @@ struct linux_efi_tpm_eventlog {
 
 extern int efi_tpm_eventlog_init(void);
 
-/* efi_runtime_service() function identifiers */
+/*
+ * efi_runtime_service() function identifiers.
+ * "NONE" is used by efi_recover_from_page_fault() to check if the page
+ * fault happened while executing an efi runtime service.
+ */
 enum efi_rts_ids {
+	NONE,
 	GET_TIME,
 	SET_TIME,
 	GET_WAKEUP_TIME,
@@ -1677,6 +1682,7 @@ enum efi_rts_ids {
 	SET_VARIABLE,
 	QUERY_VARIABLE_INFO,
 	GET_NEXT_HIGH_MONO_COUNT,
+	RESET_SYSTEM,
 	UPDATE_CAPSULE,
 	QUERY_CAPSULE_CAPS,
 };
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 135/191] efi/x86: Handle page faults occurring while running EFI runtime services

[Ard Biesheuvel]

On Sun, 10 Nov 2019 at 03:44, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Sai Praneeth <sai.praneeth.prakhya@intel.com>
>
> [ Upstream commit 3425d934fc0312f62024163736a7afe4de20c10f ]
>
> Memory accesses performed by UEFI runtime services should be limited to:
> - reading/executing from EFI_RUNTIME_SERVICES_CODE memory regions
> - reading/writing from/to EFI_RUNTIME_SERVICES_DATA memory regions
> - reading/writing by-ref arguments
> - reading/writing from/to the stack.
>
> Accesses outside these regions may cause the kernel to hang because the
> memory region requested by the firmware isn't mapped in efi_pgd, which
> causes a page fault in ring 0 and the kernel fails to handle it, leading
> to die(). To save kernel from hanging, add an EFI specific page fault
> handler which recovers from such faults by
> 1. If the efi runtime service is efi_reset_system(), reboot the machine
>    through BIOS.
> 2. If the efi runtime service is _not_ efi_reset_system(), then freeze
>    efi_rts_wq and schedule a new process.
>
> The EFI page fault handler offers us two advantages:
> 1. Avoid potential hangs caused by buggy firmware.
> 2. Shout loud that the firmware is buggy and hence is not a kernel bug.
>
> Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
> Suggested-by: Matt Fleming <matt@codeblueprint.co.uk>
> Based-on-code-from: Ricardo Neri <ricardo.neri@intel.com>
> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
> [ardb: clarify commit log]
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

NAK

This backports a patch to -stable that is *known* to be broken, given
that the same series backports a patch that fixes it.


> ---
>  arch/x86/include/asm/efi.h              |  1 +
>  arch/x86/mm/fault.c                     |  9 +++
>  arch/x86/platform/efi/quirks.c          | 78 +++++++++++++++++++++++++
>  drivers/firmware/efi/runtime-wrappers.c |  8 +++
>  include/linux/efi.h                     |  8 ++-
>  5 files changed, 103 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
> index baa549f8e9188..45864898f7e50 100644
> --- a/arch/x86/include/asm/efi.h
> +++ b/arch/x86/include/asm/efi.h
> @@ -138,6 +138,7 @@ extern void __init efi_apply_memmap_quirks(void);
>  extern int __init efi_reuse_config(u64 tables, int nr_tables);
>  extern void efi_delete_dummy_variable(void);
>  extern void efi_switch_mm(struct mm_struct *mm);
> +extern void efi_recover_from_page_fault(unsigned long phys_addr);
>
>  struct efi_setup_data {
>         u64 fw_vendor;
> diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
> index 1bcb7242ad79a..53e69c7c5cd18 100644
> --- a/arch/x86/mm/fault.c
> +++ b/arch/x86/mm/fault.c
> @@ -16,6 +16,7 @@
>  #include <linux/prefetch.h>            /* prefetchw                    */
>  #include <linux/context_tracking.h>    /* exception_enter(), ...       */
>  #include <linux/uaccess.h>             /* faulthandler_disabled()      */
> +#include <linux/efi.h>                 /* efi_recover_from_page_fault()*/
>  #include <linux/mm_types.h>
>
>  #include <asm/cpufeature.h>            /* boot_cpu_has, ...            */
> @@ -25,6 +26,7 @@
>  #include <asm/vsyscall.h>              /* emulate_vsyscall             */
>  #include <asm/vm86.h>                  /* struct vm86                  */
>  #include <asm/mmu_context.h>           /* vma_pkey()                   */
> +#include <asm/efi.h>                   /* efi_recover_from_page_fault()*/
>
>  #define CREATE_TRACE_POINTS
>  #include <asm/trace/exceptions.h>
> @@ -783,6 +785,13 @@ no_context(struct pt_regs *regs, unsigned long error_code,
>         if (is_errata93(regs, address))
>                 return;
>
> +       /*
> +        * Buggy firmware could access regions which might page fault, try to
> +        * recover from such faults.
> +        */
> +       if (IS_ENABLED(CONFIG_EFI))
> +               efi_recover_from_page_fault(address);
> +
>         /*
>          * Oops. The kernel tried to access some bad page. We'll have to
>          * terminate things with extreme prejudice:
> diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
> index 844d31cb8a0c7..669babcaf245a 100644
> --- a/arch/x86/platform/efi/quirks.c
> +++ b/arch/x86/platform/efi/quirks.c
> @@ -16,6 +16,7 @@
>  #include <asm/efi.h>
>  #include <asm/uv/uv.h>
>  #include <asm/cpu_device_id.h>
> +#include <asm/reboot.h>
>
>  #define EFI_MIN_RESERVE 5120
>
> @@ -654,3 +655,80 @@ int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
>  }
>
>  #endif
> +
> +/*
> + * If any access by any efi runtime service causes a page fault, then,
> + * 1. If it's efi_reset_system(), reboot through BIOS.
> + * 2. If any other efi runtime service, then
> + *    a. Return error status to the efi caller process.
> + *    b. Disable EFI Runtime Services forever and
> + *    c. Freeze efi_rts_wq and schedule new process.
> + *
> + * @return: Returns, if the page fault is not handled. This function
> + * will never return if the page fault is handled successfully.
> + */
> +void efi_recover_from_page_fault(unsigned long phys_addr)
> +{
> +       if (!IS_ENABLED(CONFIG_X86_64))
> +               return;
> +
> +       /*
> +        * Make sure that an efi runtime service caused the page fault.
> +        * "efi_mm" cannot be used to check if the page fault had occurred
> +        * in the firmware context because efi=old_map doesn't use efi_pgd.
> +        */
> +       if (efi_rts_work.efi_rts_id == NONE)
> +               return;
> +
> +       /*
> +        * Address range 0x0000 - 0x0fff is always mapped in the efi_pgd, so
> +        * page faulting on these addresses isn't expected.
> +        */
> +       if (phys_addr >= 0x0000 && phys_addr <= 0x0fff)
> +               return;
> +
> +       /*
> +        * Print stack trace as it might be useful to know which EFI Runtime
> +        * Service is buggy.
> +        */
> +       WARN(1, FW_BUG "Page fault caused by firmware at PA: 0x%lx\n",
> +            phys_addr);
> +
> +       /*
> +        * Buggy efi_reset_system() is handled differently from other EFI
> +        * Runtime Services as it doesn't use efi_rts_wq. Although,
> +        * native_machine_emergency_restart() says that machine_real_restart()
> +        * could fail, it's better not to compilcate this fault handler
> +        * because this case occurs *very* rarely and hence could be improved
> +        * on a need by basis.
> +        */
> +       if (efi_rts_work.efi_rts_id == RESET_SYSTEM) {
> +               pr_info("efi_reset_system() buggy! Reboot through BIOS\n");
> +               machine_real_restart(MRR_BIOS);
> +               return;
> +       }
> +
> +       /*
> +        * Before calling EFI Runtime Service, the kernel has switched the
> +        * calling process to efi_mm. Hence, switch back to task_mm.
> +        */
> +       arch_efi_call_virt_teardown();
> +
> +       /* Signal error status to the efi caller process */
> +       efi_rts_work.status = EFI_ABORTED;
> +       complete(&efi_rts_work.efi_rts_comp);
> +
> +       clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
> +       pr_info("Froze efi_rts_wq and disabled EFI Runtime Services\n");
> +
> +       /*
> +        * Call schedule() in an infinite loop, so that any spurious wake ups
> +        * will never run efi_rts_wq again.
> +        */
> +       for (;;) {
> +               set_current_state(TASK_IDLE);
> +               schedule();
> +       }
> +
> +       return;
> +}
> diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
> index b31e3d3729a6d..e2abfdb5cee6a 100644
> --- a/drivers/firmware/efi/runtime-wrappers.c
> +++ b/drivers/firmware/efi/runtime-wrappers.c
> @@ -61,6 +61,11 @@ struct efi_runtime_work efi_rts_work;
>  ({                                                                     \
>         efi_rts_work.status = EFI_ABORTED;                              \
>                                                                         \
> +       if (!efi_enabled(EFI_RUNTIME_SERVICES)) {                       \
> +               pr_warn_once("EFI Runtime Services are disabled!\n");   \
> +               goto exit;                                              \
> +       }                                                               \
> +                                                                       \
>         init_completion(&efi_rts_work.efi_rts_comp);                    \
>         INIT_WORK(&efi_rts_work.work, efi_call_rts);                    \
>         efi_rts_work.arg1 = _arg1;                                      \
> @@ -79,6 +84,8 @@ struct efi_runtime_work efi_rts_work;
>         else                                                            \
>                 pr_err("Failed to queue work to efi_rts_wq.\n");        \
>                                                                         \
> +exit:                                                                  \
> +       efi_rts_work.efi_rts_id = NONE;                                 \
>         efi_rts_work.status;                                            \
>  })
>
> @@ -400,6 +407,7 @@ static void virt_efi_reset_system(int reset_type,
>                         "could not get exclusive access to the firmware\n");
>                 return;
>         }
> +       efi_rts_work.efi_rts_id = RESET_SYSTEM;
>         __efi_call_virt(reset_system, reset_type, status, data_size, data);
>         up(&efi_runtime_lock);
>  }
> diff --git a/include/linux/efi.h b/include/linux/efi.h
> index 9d4c25090fd04..9a86f467b8911 100644
> --- a/include/linux/efi.h
> +++ b/include/linux/efi.h
> @@ -1666,8 +1666,13 @@ struct linux_efi_tpm_eventlog {
>
>  extern int efi_tpm_eventlog_init(void);
>
> -/* efi_runtime_service() function identifiers */
> +/*
> + * efi_runtime_service() function identifiers.
> + * "NONE" is used by efi_recover_from_page_fault() to check if the page
> + * fault happened while executing an efi runtime service.
> + */
>  enum efi_rts_ids {
> +       NONE,
>         GET_TIME,
>         SET_TIME,
>         GET_WAKEUP_TIME,
> @@ -1677,6 +1682,7 @@ enum efi_rts_ids {
>         SET_VARIABLE,
>         QUERY_VARIABLE_INFO,
>         GET_NEXT_HIGH_MONO_COUNT,
> +       RESET_SYSTEM,
>         UPDATE_CAPSULE,
>         QUERY_CAPSULE_CAPS,
>  };
> --
> 2.20.1
>

[PATCH AUTOSEL 4.19 136/191] arm64: tegra: I2C on Tegra194 is not compatible with Tegra114

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit d9fd22447ba59a9b53a202fade977e82bfba8d8d ]

Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index a4dfcd19b9e88..9fc14bb9a0aff 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -118,7 +118,7 @@
 		};
 
 		gen1_i2c: i2c@3160000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03160000 0x10000>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -143,7 +143,7 @@
 		};
 
 		cam_i2c: i2c@3180000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03180000 0x10000>;
 			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -157,7 +157,7 @@
 
 		/* shares pads with dpaux1 */
 		dp_aux_ch1_i2c: i2c@3190000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03190000 0x10000>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -171,7 +171,7 @@
 
 		/* shares pads with dpaux0 */
 		dp_aux_ch0_i2c: i2c@31b0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031b0000 0x10000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -184,7 +184,7 @@
 		};
 
 		gen7_i2c: i2c@31c0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031c0000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -197,7 +197,7 @@
 		};
 
 		gen9_i2c: i2c@31e0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031e0000 0x10000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -264,7 +264,7 @@
 		};
 
 		gen2_i2c: i2c@c240000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c240000 0x10000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -277,7 +277,7 @@
 		};
 
 		gen8_i2c: i2c@c250000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c250000 0x10000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 137/191] ARM: dts: tegra30: fix xcvr-setup-use-fuses

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]

There was a dot instead of a comma. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index a6781f6533105..5a04ddefb71f6 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -896,7 +896,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,xcvr-hsslew = <32>;
@@ -933,7 +933,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
@@ -969,7 +969,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 138/191] ARM: dts: tegra20: restore address order

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 8188391c127ea34d66f37eda6755d0acb51dc600 ]

Commit 6c468f109884 ("ARM: dts: tegra: add Tegra20 NAND flash
controller node") introduced the nand-controller node. However, it got
added at the wrong spot not honoring the address order. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20.dtsi | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 15b73bd377f04..80854f7de765c 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -419,19 +419,6 @@
 		status = "disabled";
 	};
 
-	gmi@70009000 {
-		compatible = "nvidia,tegra20-gmi";
-		reg = <0x70009000 0x1000>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xd0000000 0xfffffff>;
-		clocks = <&tegra_car TEGRA20_CLK_NOR>;
-		clock-names = "gmi";
-		resets = <&tegra_car 42>;
-		reset-names = "gmi";
-		status = "disabled";
-	};
-
 	nand-controller@70008000 {
 		compatible = "nvidia,tegra20-nand";
 		reg = <0x70008000 0x100>;
@@ -447,6 +434,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 139/191] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]

Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-apalis.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 2f807d40c1b79..e749e047db7ab 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -171,14 +171,14 @@
 
 			/* Apalis MMC1 */
 			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6",
-					      "sdmmc3_cmd_pa7";
+				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7",
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
 					      "sdmmc3_dat1_pb6",
 					      "sdmmc3_dat2_pb5",
 					      "sdmmc3_dat3_pb4",
-- 
2.20.1

[PATCH AUTOSEL 4.19 140/191] ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit b38f6aa4b60a1fcc41f5c469981f8f62d6070ee3 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-apalis.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index e749e047db7ab..f810bbf8212bd 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -659,7 +659,7 @@
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -674,7 +674,7 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 141/191] ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 503fcd8464fb6cd18073e97dec59b933930655d6 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 16e1f387aa6db..a0c550e26738f 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -79,7 +79,8 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 		spidev0: spi@1 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 142/191] ARM: dts: paz00: fix wakeup gpio keycode

[Sasha Levin]

From: Marc Dietrich <marvin24@gmx.de>

[ Upstream commit ebea2a43fdafdbce918bd7e200b709d6c33b9f3b ]

The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20-paz00.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ef245291924f0..4f9b4a889febe 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -524,10 +524,10 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 143/191] net: smsc: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/smsc/smc911x.c  | 3 ++-
 drivers/net/ethernet/smsc/smc91x.c   | 3 ++-
 drivers/net/ethernet/smsc/smsc911x.c | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index b1b53f6c452f5..8355dfbb8ec3c 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -513,7 +513,8 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
  * now, or set the card to generates an interrupt when ready
  * for the packet.
  */
-static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	unsigned int free;
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index b944828f9ea3d..8d6cff8bd1622 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -638,7 +638,8 @@ done:	if (!THROTTLE_TX_PKTS)
  * now, or set the card to generates an interrupt when ready
  * for the packet.
  */
-static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct smc_local *lp = netdev_priv(dev);
 	void __iomem *ioaddr = lp->base;
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index f0afb88d7bc2b..ce4bfecc26c7a 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1786,7 +1786,8 @@ static int smsc911x_stop(struct net_device *dev)
 }
 
 /* Entry point for transmitting a packet */
-static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct smsc911x_data *pdata = netdev_priv(dev);
 	unsigned int freespace;
-- 
2.20.1

[PATCH AUTOSEL 4.19 144/191] net: faraday: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0a715156656bddf4aa92d9868f850aeeb0465fd0 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 4 ++--
 drivers/net/ethernet/faraday/ftmac100.c  | 7 ++++---
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index ed6c76d20b45b..4f49825d41ea5 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -712,8 +712,8 @@ static bool ftgmac100_prep_tx_csum(struct sk_buff *skb, u32 *csum_vlan)
 	return skb_checksum_help(skb) == 0;
 }
 
-static int ftgmac100_hard_start_xmit(struct sk_buff *skb,
-				     struct net_device *netdev)
+static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
+					     struct net_device *netdev)
 {
 	struct ftgmac100 *priv = netdev_priv(netdev);
 	struct ftgmac100_txdes *txdes, *first;
diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c
index 9015bd911bee9..084f24daf2b5a 100644
--- a/drivers/net/ethernet/faraday/ftmac100.c
+++ b/drivers/net/ethernet/faraday/ftmac100.c
@@ -634,8 +634,8 @@ static void ftmac100_tx_complete(struct ftmac100 *priv)
 		;
 }
 
-static int ftmac100_xmit(struct ftmac100 *priv, struct sk_buff *skb,
-			 dma_addr_t map)
+static netdev_tx_t ftmac100_xmit(struct ftmac100 *priv, struct sk_buff *skb,
+				 dma_addr_t map)
 {
 	struct net_device *netdev = priv->netdev;
 	struct ftmac100_txdes *txdes;
@@ -1015,7 +1015,8 @@ static int ftmac100_stop(struct net_device *netdev)
 	return 0;
 }
 
-static int ftmac100_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t
+ftmac100_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct ftmac100 *priv = netdev_priv(netdev);
 	dma_addr_t map;
-- 
2.20.1

[PATCH AUTOSEL 4.19 145/191] PCI/ERR: Run error recovery callbacks for all affected devices

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit bfcb79fca19d267712e425af1dd48812c40dec0c ]

If an Endpoint reported an error with ERR_FATAL, we previously ran driver
error recovery callbacks only for the Endpoint's driver.  But if we reset a
Link to recover from the error, all downstream components are affected,
including the Endpoint, any multi-function peers, and children of those
peers.

Initiate the Link reset from the deepest Downstream Port that is
reliable, and call the error recovery callbacks for all its children.

If a Downstream Port (including a Root Port) reports an error, we assume
the Port itself is reliable and we need to reset its downstream Link.  In
all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume
the Link leading to the component needs to be reset, so we initiate the
reset at the parent Downstream Port.

This allows two other clean-ups.  First, we currently only use a Link
reset, which can only be initiated using a Downstream Port, so we can
remove checks for Endpoints.  Second, the Downstream Port where we initiate
the Link reset is reliable (unlike components downstream from it), so the
special cases for error detect and resume are no longer necessary.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/err.c | 85 +++++++++++-------------------------------
 1 file changed, 21 insertions(+), 64 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 12c1205e1d804..2c3b5bd59b18f 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -63,30 +63,12 @@ static int report_error_detected(struct pci_dev *dev, void *data)
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->error_detected) {
-		if (result_data->state == pci_channel_io_frozen &&
-			dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-			/*
-			 * In case of fatal recovery, if one of down-
-			 * stream device has no driver. We might be
-			 * unable to recover because a later insmod
-			 * of a driver for this device is unaware of
-			 * its hw state.
-			 */
-			pci_printk(KERN_DEBUG, dev, "device has %s\n",
-				   dev->driver ?
-				   "no AER-aware driver" : "no driver");
-		}
-
 		/*
-		 * If there's any device in the subtree that does not
-		 * have an error_detected callback, returning
-		 * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
-		 * the subsequent mmio_enabled/slot_reset/resume
-		 * callbacks of "any" device in the subtree. All the
-		 * devices in the subtree are left in the error state
-		 * without recovery.
+		 * If any device in the subtree does not have an error_detected
+		 * callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
+		 * error callbacks of "any" device in the subtree, and will
+		 * exit in the disconnected error state.
 		 */
-
 		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
 			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
 		else
@@ -184,34 +166,23 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 
 static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
 {
-	struct pci_dev *udev;
 	pci_ers_result_t status;
 	struct pcie_port_service_driver *driver = NULL;
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		/* Reset this port for all subordinates */
-		udev = dev;
-	} else {
-		/* Reset the upstream component (likely downstream port) */
-		udev = dev->bus->self;
-	}
-
-	/* Use the aer driver of the component firstly */
-	driver = pcie_port_find_service(udev, service);
-
+	driver = pcie_port_find_service(dev, service);
 	if (driver && driver->reset_link) {
-		status = driver->reset_link(udev);
-	} else if (udev->has_secondary_link) {
-		status = default_reset_link(udev);
+		status = driver->reset_link(dev);
+	} else if (dev->has_secondary_link) {
+		status = default_reset_link(dev);
 	} else {
 		pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
-			pci_name(udev));
+			pci_name(dev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
 	if (status != PCI_ERS_RESULT_RECOVERED) {
 		pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
-			pci_name(udev));
+			pci_name(dev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
@@ -243,31 +214,7 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 	else
 		result_data.result = PCI_ERS_RESULT_RECOVERED;
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		/*
-		 * If the error is reported by a bridge, we think this error
-		 * is related to the downstream link of the bridge, so we
-		 * do error recovery on all subordinates of the bridge instead
-		 * of the bridge and clear the error status of the bridge.
-		 */
-		if (cb == report_error_detected)
-			dev->error_state = state;
-		pci_walk_bus(dev->subordinate, cb, &result_data);
-		if (cb == report_resume) {
-			pci_aer_clear_device_status(dev);
-			pci_cleanup_aer_uncorrect_error_status(dev);
-			dev->error_state = pci_channel_io_normal;
-		}
-	} else {
-		/*
-		 * If the error is reported by an end point, we think this
-		 * error is related to the upstream link of the end point.
-		 * The error is non fatal so the bus is ok; just invoke
-		 * the callback for the function that logged the error.
-		 */
-		cb(dev, &result_data);
-	}
-
+	pci_walk_bus(dev->subordinate, cb, &result_data);
 	return result_data.result;
 }
 
@@ -347,6 +294,14 @@ void pcie_do_nonfatal_recovery(struct pci_dev *dev)
 
 	state = pci_channel_io_normal;
 
+	/*
+	 * Error recovery runs on all subordinates of the first downstream port.
+	 * If the downstream port detected the error, it is cleared at the end.
+	 */
+	if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	      pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
+		dev = dev->bus->self;
+
 	status = broadcast_error_message(dev,
 			state,
 			"error_detected",
@@ -378,6 +333,8 @@ void pcie_do_nonfatal_recovery(struct pci_dev *dev)
 				"resume",
 				report_resume);
 
+	pci_aer_clear_device_status(dev);
+	pci_cleanup_aer_uncorrect_error_status(dev);
 	pci_info(dev, "AER: Device recovery successful\n");
 	return;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 146/191] f2fs: update i_size after DIO completion

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 0a4daae5ffea39f5015334e4d18a6a80b447cae4 ]

This is related to
ee70daaba82d ("xfs: update i_size after unwritten conversion in dio completion")

If we update i_size during dio_write, dio_read can read out stale data, which
breaks xfstests/465.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 15 +++++++--------
 fs/f2fs/f2fs.h |  1 +
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 9511466bc7857..c0d0744a52a55 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -887,7 +887,6 @@ static int __allocate_data_block(struct dnode_of_data *dn, int seg_type)
 	struct f2fs_summary sum;
 	struct node_info ni;
 	block_t old_blkaddr;
-	pgoff_t fofs;
 	blkcnt_t count = 1;
 	int err;
 
@@ -916,12 +915,10 @@ static int __allocate_data_block(struct dnode_of_data *dn, int seg_type)
 					old_blkaddr, old_blkaddr);
 	f2fs_set_data_blkaddr(dn);
 
-	/* update i_size */
-	fofs = f2fs_start_bidx_of_node(ofs_of_node(dn->node_page), dn->inode) +
-							dn->ofs_in_node;
-	if (i_size_read(dn->inode) < ((loff_t)(fofs + 1) << PAGE_SHIFT))
-		f2fs_i_size_write(dn->inode,
-				((loff_t)(fofs + 1) << PAGE_SHIFT));
+	/*
+	 * i_size will be updated by direct_IO. Otherwise, we'll get stale
+	 * data from unwritten block via dio_read.
+	 */
 	return 0;
 }
 
@@ -1087,6 +1084,8 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
 					last_ofs_in_node = dn.ofs_in_node;
 				}
 			} else {
+				WARN_ON(flag != F2FS_GET_BLOCK_PRE_DIO &&
+					flag != F2FS_GET_BLOCK_DIO);
 				err = __allocate_data_block(&dn,
 							map->m_seg_type);
 				if (!err)
@@ -1266,7 +1265,7 @@ static int get_data_block_dio(struct inode *inode, sector_t iblock,
 			struct buffer_head *bh_result, int create)
 {
 	return __get_data_block(inode, iblock, bh_result, create,
-						F2FS_GET_BLOCK_DEFAULT, NULL,
+						F2FS_GET_BLOCK_DIO, NULL,
 						f2fs_rw_hint_to_seg_type(
 							inode->i_write_hint));
 }
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index fb216488d67a9..6beda9147d3a0 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -600,6 +600,7 @@ enum {
 	F2FS_GET_BLOCK_DEFAULT,
 	F2FS_GET_BLOCK_FIEMAP,
 	F2FS_GET_BLOCK_BMAP,
+	F2FS_GET_BLOCK_DIO,
 	F2FS_GET_BLOCK_PRE_DIO,
 	F2FS_GET_BLOCK_PRE_AIO,
 	F2FS_GET_BLOCK_PRECACHE,
-- 
2.20.1

[PATCH AUTOSEL 4.19 147/191] f2fs: fix to recover inode's project id during POR

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit f4474aa6e5e901ee4af21f39f1b9115aaaaec503 ]

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr -p 1 /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr -p /mnt/f2fs/file

    0 -----------------N- /mnt/f2fs/file

But actually, we expect the correct result is:

    1 -----------------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_projid field during mount,
fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/recovery.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 2c5d2c25d37e3..01636d996ba41 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -218,6 +218,19 @@ static void recover_inode(struct inode *inode, struct page *page)
 	inode->i_mode = le16_to_cpu(raw->i_mode);
 	i_uid_write(inode, le32_to_cpu(raw->i_uid));
 	i_gid_write(inode, le32_to_cpu(raw->i_gid));
+
+	if (raw->i_inline & F2FS_EXTRA_ATTR) {
+		if (f2fs_sb_has_project_quota(F2FS_I_SB(inode)->sb) &&
+			F2FS_FITS_IN_INODE(raw, le16_to_cpu(raw->i_extra_isize),
+								i_projid)) {
+			projid_t i_projid;
+
+			i_projid = (projid_t)le32_to_cpu(raw->i_projid);
+			F2FS_I(inode)->i_projid =
+				make_kprojid(&init_user_ns, i_projid);
+		}
+	}
+
 	f2fs_i_size_write(inode, le64_to_cpu(raw->i_size));
 	inode->i_atime.tv_sec = le64_to_cpu(raw->i_atime);
 	inode->i_ctime.tv_sec = le64_to_cpu(raw->i_ctime);
-- 
2.20.1

[PATCH AUTOSEL 4.19 148/191] f2fs: mark inode dirty explicitly in recover_inode()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 4a1728cad6340bfbe17bd17fd158b2165cd99508 ]

Mark inode dirty explicitly in the end of recover_inode() to make sure
that all recoverable fields can be persisted later.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/recovery.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 01636d996ba41..733f005b85d65 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -247,6 +247,8 @@ static void recover_inode(struct inode *inode, struct page *page)
 
 	recover_inline_flags(inode, raw);
 
+	f2fs_mark_inode_dirty_sync(inode, true);
+
 	if (file_enc_name(inode))
 		name = "<encrypted>";
 	else
-- 
2.20.1

[PATCH AUTOSEL 4.19 149/191] RDMA: Fix dependencies for rdma_user_mmap_io

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 46bdf777685677c1cc6b3da9220aace9da690731 ]

The mlx4 driver produces a link error when it is configured
as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m:

drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap':
main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io'

The same function is called from mlx5, which already has a
dependency to ensure we can call it, and from hns, which
appears to suffer from the same problem.

This adds the same dependency that mlx5 uses to the other two.

Fixes: 6745d356ab39 ("RDMA/hns: Use rdma_user_mmap_io")
Fixes: c282da4109e4 ("RDMA/mlx4: Use rdma_user_mmap_io")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/Kconfig  | 1 +
 drivers/infiniband/hw/mlx4/Kconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/hns/Kconfig b/drivers/infiniband/hw/hns/Kconfig
index fddb5fdf92de8..21c2100b2ea98 100644
--- a/drivers/infiniband/hw/hns/Kconfig
+++ b/drivers/infiniband/hw/hns/Kconfig
@@ -1,6 +1,7 @@
 config INFINIBAND_HNS
 	tristate "HNS RoCE Driver"
 	depends on NET_VENDOR_HISILICON
+	depends on INFINIBAND_USER_ACCESS || !INFINIBAND_USER_ACCESS
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
 	---help---
 	  This is a RoCE/RDMA driver for the Hisilicon RoCE engine. The engine
diff --git a/drivers/infiniband/hw/mlx4/Kconfig b/drivers/infiniband/hw/mlx4/Kconfig
index db4aa13ebae0c..d1de3285fd885 100644
--- a/drivers/infiniband/hw/mlx4/Kconfig
+++ b/drivers/infiniband/hw/mlx4/Kconfig
@@ -1,6 +1,7 @@
 config MLX4_INFINIBAND
 	tristate "Mellanox ConnectX HCA support"
 	depends on NETDEVICES && ETHERNET && PCI && INET
+	depends on INFINIBAND_USER_ACCESS || !INFINIBAND_USER_ACCESS
 	depends on MAY_USE_DEVLINK
 	select NET_VENDOR_MELLANOX
 	select MLX4_CORE
-- 
2.20.1

[PATCH AUTOSEL 4.19 150/191] EDAC: Raise the maximum number of memory controllers

[Sasha Levin]

From: Justin Ernst <justin.ernst@hpe.com>

[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]

We observe an oops in the skx_edac module during boot:

  EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
  EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  ...
  EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
  Too many memory controllers: 16
  EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0

We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).

[ bp: This is just a band-aid fix until we've sorted out the whole issue
  with the bus_type association and handling in EDAC and can get rid of
  this arbitrary limit. ]

Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Russ Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/edac.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/edac.h b/include/linux/edac.h
index bffb97828ed67..958d69332c1d5 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -17,6 +17,7 @@
 #include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
+#include <linux/numa.h>
 
 #define EDAC_DEVICE_NAME_LEN	31
 
@@ -670,6 +671,6 @@ struct mem_ctl_info {
 /*
  * Maximum number of memory controllers in the coherent fabric.
  */
-#define EDAC_MAX_MCS	16
+#define EDAC_MAX_MCS	2 * MAX_NUMNODES
 
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.19 151/191] ARM: dts: realview: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 016add12977bcc30f77d7e48fc9a3a024cb46645 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/arm-realview-eb.dtsi    | 2 +-
 arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +-
 arch/arm/boot/dts/arm-realview-pb11mp.dts | 2 +-
 arch/arm/boot/dts/arm-realview-pbx.dtsi   | 2 +-
 arch/arm/boot/dts/versatile-ab.dts        | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index a917cf8825ca8..0e4c7c4c8c093 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -371,7 +371,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index f935b72d3d964..f2a1d25eb6cf3 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -380,7 +380,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		pb1176_ssp: ssp@1010b000 {
+		pb1176_ssp: spi@1010b000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1010b000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 36203288de426..7f9cbdf33a510 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -523,7 +523,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp@1000d000 {
+		spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			interrupt-parent = <&intc_pb11mp>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 10868ba3277f5..a5676697ff3b7 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -362,7 +362,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 5f61d36090270..6f4f60ba5429c 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -373,7 +373,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		ssp@101f4000 {
+		spi@101f4000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 152/191] firmware: dell_rbu: Make payload memory uncachable

[Sasha Levin]

From: Stuart Hayes <stuart.w.hayes@gmail.com>

[ Upstream commit 6aecee6ad41cf97c0270f72da032c10eef025bf0 ]

The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot.  This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).

With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/dell_rbu.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index fb8af5cb7c9bf..ccefa84f73057 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -45,6 +45,7 @@
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
 #include <linux/dma-mapping.h>
+#include <asm/set_memory.h>
 
 MODULE_AUTHOR("Abhay Salunke <abhay_salunke@dell.com>");
 MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
@@ -181,6 +182,11 @@ static int create_packet(void *data, size_t length)
 			packet_data_temp_buf = NULL;
 		}
 	}
+	/*
+	 * set to uncachable or it may never get written back before reboot
+	 */
+	set_memory_uc((unsigned long)packet_data_temp_buf, 1 << ordernum);
+
 	spin_lock(&rbu_data.lock);
 
 	newpacket->data = packet_data_temp_buf;
@@ -349,6 +355,8 @@ static void packet_empty_list(void)
 		 * to make sure there are no stale RBU packets left in memory
 		 */
 		memset(newpacket->data, 0, rbu_data.packetsize);
+		set_memory_wb((unsigned long)newpacket->data,
+			1 << newpacket->ordernum);
 		free_pages((unsigned long) newpacket->data,
 			newpacket->ordernum);
 		kfree(newpacket);
-- 
2.20.1

[PATCH AUTOSEL 4.19 153/191] Bluetooth: hci_serdev: clear HCI_UART_PROTO_READY to avoid closing proto races

[Sasha Levin]

From: Balakrishna Godavarthi <bgodavar@codeaurora.org>

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_serdev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index aa2543b3c2869..46e20444ba19b 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -368,6 +368,7 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 {
 	struct hci_dev *hdev = hu->hdev;
 
+	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 	hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 154/191] Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]

If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 260ef5426e0ca..974c1b8a689c1 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -6819,6 +6819,16 @@ static int l2cap_le_data_rcv(struct l2cap_chan *chan, struct sk_buff *skb)
 		chan->sdu_len = sdu_len;
 		chan->sdu_last_frag = skb;
 
+		/* Detect if remote is not able to use the selected MPS */
+		if (skb->len + L2CAP_SDULEN_SIZE < chan->mps) {
+			u16 mps_len = skb->len + L2CAP_SDULEN_SIZE;
+
+			/* Adjust the number of credits */
+			BT_DBG("chan->mps %u -> %u", chan->mps, mps_len);
+			chan->mps = mps_len;
+			l2cap_chan_le_send_credits(chan);
+		}
+
 		return 0;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 155/191] Bluetooth: btrsi: fix bt tx timeout issue

[Sasha Levin]

From: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>

[ Upstream commit 7cbfd1e2aad410d96fa6162aeb3f9cff1fecfc58 ]

observed sometimes data is coming with unaligned address from kernel
BT stack. If unaligned address is passed, some data in payload is
stripped when packet is loading to firmware and this results, BT
connection timeout is happening.

sh# hciconfig hci0 up
Can't init device hci0: hci0 command 0x0c03 tx timeout

Fixed this by moving the data to aligned address.

Signed-off-by: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btrsi.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
index 60d1419590bab..3951f7b238404 100644
--- a/drivers/bluetooth/btrsi.c
+++ b/drivers/bluetooth/btrsi.c
@@ -21,8 +21,9 @@
 #include <net/rsi_91x.h>
 #include <net/genetlink.h>
 
-#define RSI_HEADROOM_FOR_BT_HAL	16
+#define RSI_DMA_ALIGN	8
 #define RSI_FRAME_DESC_SIZE	16
+#define RSI_HEADROOM_FOR_BT_HAL	(RSI_FRAME_DESC_SIZE + RSI_DMA_ALIGN)
 
 struct rsi_hci_adapter {
 	void *priv;
@@ -70,6 +71,16 @@ static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
 		bt_cb(new_skb)->pkt_type = hci_skb_pkt_type(skb);
 		kfree_skb(skb);
 		skb = new_skb;
+		if (!IS_ALIGNED((unsigned long)skb->data, RSI_DMA_ALIGN)) {
+			u8 *skb_data = skb->data;
+			int skb_len = skb->len;
+
+			skb_push(skb, RSI_DMA_ALIGN);
+			skb_pull(skb, PTR_ALIGN(skb->data,
+						RSI_DMA_ALIGN) - skb->data);
+			memmove(skb->data, skb_data, skb_len);
+			skb_trim(skb, skb_len);
+		}
 	}
 
 	return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
-- 
2.20.1

[PATCH AUTOSEL 4.19 156/191] x86/hyperv: Suppress "PCI: Fatal: No config space access function found"

[Sasha Levin]

From: Dexuan Cui <decui@microsoft.com>

[ Upstream commit 2f285f46240d67060061d153786740d4df53cd78 ]

A Generation-2 Linux VM on Hyper-V doesn't have the legacy PCI bus, and
users always see the scary warning, which is actually harmless.

Suppress it.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org>
Cc: Olaf Aepfle <olaf@aepfle.de>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Marcelo Cerri <marcelo.cerri@canonical.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Link: https://lkml.kernel.org/r/ <KU1P153MB0166D977DC930996C4BF538ABF1D0@KU1P153MB0166.APCP153.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/hyperv/hv_init.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index 3fb8551552862..8a9cff1f129dc 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -17,6 +17,7 @@
  *
  */
 
+#include <linux/efi.h>
 #include <linux/types.h>
 #include <asm/apic.h>
 #include <asm/desc.h>
@@ -257,6 +258,22 @@ static int hv_cpu_die(unsigned int cpu)
 	return 0;
 }
 
+static int __init hv_pci_init(void)
+{
+	int gen2vm = efi_enabled(EFI_BOOT);
+
+	/*
+	 * For Generation-2 VM, we exit from pci_arch_init() by returning 0.
+	 * The purpose is to suppress the harmless warning:
+	 * "PCI: Fatal: No config space access function found"
+	 */
+	if (gen2vm)
+		return 0;
+
+	/* For Generation-1 VM, we'll proceed in pci_arch_init().  */
+	return 1;
+}
+
 /*
  * This function is to be invoked early in the boot sequence after the
  * hypervisor has been detected.
@@ -333,6 +350,8 @@ void __init hyperv_init(void)
 
 	hv_apic_init();
 
+	x86_init.pci.arch_init = hv_pci_init;
+
 	/*
 	 * Register Hyper-V specific clocksource.
 	 */
-- 
2.20.1

[PATCH AUTOSEL 4.19 157/191] crypto: s5p-sss: Fix race in error handling

[Sasha Levin]

From: Christoph Manszewski <c.manszewski@samsung.com>

[ Upstream commit 5842cd44786055231b233ed5ed98cdb63ffb7db3 ]

Remove a race condition introduced by error path in functions:
s5p_aes_interrupt and s5p_aes_crypt_start. Setting the busy field of
struct s5p_aes_dev to false made it possible for s5p_tasklet_cb to
change the req field, before s5p_aes_complete was called.

Change the first parameter of s5p_aes_complete to struct
ablkcipher_request. Before spin_unlock, make a copy of the currently
handled request, to ensure s5p_aes_complete function call with the
correct request.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/s5p-sss.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index faa282074e5aa..9021ad9df0c45 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -475,9 +475,9 @@ static void s5p_sg_done(struct s5p_aes_dev *dev)
 }
 
 /* Calls the completion. Cannot be called with dev->lock hold. */
-static void s5p_aes_complete(struct s5p_aes_dev *dev, int err)
+static void s5p_aes_complete(struct ablkcipher_request *req, int err)
 {
-	dev->req->base.complete(&dev->req->base, err);
+	req->base.complete(&req->base, err);
 }
 
 static void s5p_unset_outdata(struct s5p_aes_dev *dev)
@@ -655,6 +655,7 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = dev_id;
 	struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
+	struct ablkcipher_request *req;
 	int err_dma_tx = 0;
 	int err_dma_rx = 0;
 	int err_dma_hx = 0;
@@ -727,7 +728,7 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
 
 		spin_unlock_irqrestore(&dev->lock, flags);
 
-		s5p_aes_complete(dev, 0);
+		s5p_aes_complete(dev->req, 0);
 		/* Device is still busy */
 		tasklet_schedule(&dev->tasklet);
 	} else {
@@ -752,11 +753,12 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
 error:
 	s5p_sg_done(dev);
 	dev->busy = false;
+	req = dev->req;
 	if (err_dma_hx == 1)
 		s5p_set_dma_hashdata(dev, dev->hash_sg_iter);
 
 	spin_unlock_irqrestore(&dev->lock, flags);
-	s5p_aes_complete(dev, err);
+	s5p_aes_complete(req, err);
 
 hash_irq_end:
 	/*
@@ -1983,7 +1985,7 @@ static void s5p_aes_crypt_start(struct s5p_aes_dev *dev, unsigned long mode)
 	s5p_sg_done(dev);
 	dev->busy = false;
 	spin_unlock_irqrestore(&dev->lock, flags);
-	s5p_aes_complete(dev, err);
+	s5p_aes_complete(req, err);
 }
 
 static void s5p_tasklet_cb(unsigned long data)
-- 
2.20.1

[PATCH AUTOSEL 4.19 158/191] crypto: s5p-sss: Fix Fix argument list alignment

[Sasha Levin]

From: Christoph Manszewski <c.manszewski@samsung.com>

[ Upstream commit 6c12b6ba45490eeb820fdceccf5a53f42a26799c ]

Fix misalignment of continued argument list.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/s5p-sss.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index 9021ad9df0c45..b7216935236f0 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -491,7 +491,7 @@ static void s5p_unset_indata(struct s5p_aes_dev *dev)
 }
 
 static int s5p_make_sg_cpy(struct s5p_aes_dev *dev, struct scatterlist *src,
-			    struct scatterlist **dst)
+			   struct scatterlist **dst)
 {
 	void *pages;
 	int len;
@@ -1889,7 +1889,7 @@ static int s5p_set_indata_start(struct s5p_aes_dev *dev,
 }
 
 static int s5p_set_outdata_start(struct s5p_aes_dev *dev,
-				struct ablkcipher_request *req)
+				 struct ablkcipher_request *req)
 {
 	struct scatterlist *sg;
 	int err;
-- 
2.20.1

[PATCH AUTOSEL 4.19 159/191] crypto: fix a memory leak in rsa-kcs1pad's encryption mode

[Sasha Levin]

From: Dan Aloni <dan@kernelim.com>

[ Upstream commit 3944f139d5592790b70bc64f197162e643a8512b ]

The encryption mode of pkcs1pad never uses out_sg and out_buf, so
there's no need to allocate the buffer, which presently is not even
being freed.

CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: linux-crypto@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/rsa-pkcs1pad.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/crypto/rsa-pkcs1pad.c b/crypto/rsa-pkcs1pad.c
index 9893dbfc1af45..812476e468213 100644
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -261,15 +261,6 @@ static int pkcs1pad_encrypt(struct akcipher_request *req)
 	pkcs1pad_sg_set_buf(req_ctx->in_sg, req_ctx->in_buf,
 			ctx->key_size - 1 - req->src_len, req->src);
 
-	req_ctx->out_buf = kmalloc(ctx->key_size, GFP_KERNEL);
-	if (!req_ctx->out_buf) {
-		kfree(req_ctx->in_buf);
-		return -ENOMEM;
-	}
-
-	pkcs1pad_sg_set_buf(req_ctx->out_sg, req_ctx->out_buf,
-			ctx->key_size, NULL);
-
 	akcipher_request_set_tfm(&req_ctx->child_req, ctx->child);
 	akcipher_request_set_callback(&req_ctx->child_req, req->base.flags,
 			pkcs1pad_encrypt_sign_complete_cb, req);
-- 
2.20.1

[PATCH AUTOSEL 4.19 160/191] iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dump

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 79f25b10c9da3dbc953e47033d0494e51580ac3b ]

We can dump data from the firmware either when it crashes,
or when the firmware is alive.
Not all the data is available if the firmware is running
(like the Tx / Rx FIFOs which are available only when the
firmware is halted), so we first check that the firmware
is alive to compute the required size for the dump and then
fill the buffer with the data.

When we allocate the buffer, we test the STATUS_FW_ERROR
bit to check if the firmware is alive or not. This bit
can be changed during the course of the dump since it is
modified in the interrupt handler.

We hit a case where we allocate the buffer while the
firmware is sill working, and while we start to fill the
buffer, the firmware crashes. Then we test STATUS_FW_ERROR
again and decide to fill the buffer with data like the
FIFOs even if no room was allocated for this data in the
buffer. This means that we overflow the buffer that was
allocated leading to memory corruption.

To fix this, test the STATUS_FW_ERROR bit only once and
rely on local variables to check if we should dump fifos
or other firmware components.

Fixes: 04fd2c28226f ("iwlwifi: mvm: add rxf and txf to dump data")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index a31a42e673c46..37657e999ff8b 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -824,7 +824,7 @@ void iwl_fw_error_dump(struct iwl_fw_runtime *fwrt)
 	}
 
 	/* We only dump the FIFOs if the FW is in error state */
-	if (test_bit(STATUS_FW_ERROR, &fwrt->trans->status)) {
+	if (fifo_data_len) {
 		iwl_fw_dump_fifos(fwrt, &dump_data);
 		if (radio_len)
 			iwl_read_radio_regs(fwrt, &dump_data);
-- 
2.20.1

[PATCH AUTOSEL 4.19 161/191] iwlwifi: fix non_shared_ant for 22000 devices

[Sasha Levin]

From: Erel Geron <erelx.geron@intel.com>

[ Upstream commit a40287727d9b737e183959fd31a4e0c55f312853 ]

The non-shared antenna was wrong for 22000 device series.
Fix it to ANT_B for correct antenna preference by coex in MVM driver.

Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support")
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/cfg/22000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
index b4347806a59ed..a0de61aa0feff 100644
--- a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
+++ b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
@@ -143,7 +143,7 @@ static const struct iwl_ht_params iwl_22000_ht_params = {
 	.ucode_api_min = IWL_22000_UCODE_API_MIN,			\
 	.led_mode = IWL_LED_RF_STATE,					\
 	.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_22000,		\
-	.non_shared_ant = ANT_A,					\
+	.non_shared_ant = ANT_B,					\
 	.dccm_offset = IWL_22000_DCCM_OFFSET,				\
 	.dccm_len = IWL_22000_DCCM_LEN,					\
 	.dccm2_offset = IWL_22000_DCCM2_OFFSET,				\
-- 
2.20.1

[PATCH AUTOSEL 4.19 162/191] iwlwifi: pcie: read correct prph address for newer devices

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit 84fb372c892e231e9a2ffdaa5c2df52d94aa536c ]

For newer devices we have higher range of periphery
addresses. Currently it is masked out, so we end up
reading another address.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index 7d319b6863feb..954f932e9c88e 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1830,18 +1830,30 @@ static u32 iwl_trans_pcie_read32(struct iwl_trans *trans, u32 ofs)
 	return readl(IWL_TRANS_GET_PCIE_TRANS(trans)->hw_base + ofs);
 }
 
+static u32 iwl_trans_pcie_prph_msk(struct iwl_trans *trans)
+{
+	if (trans->cfg->device_family >= IWL_DEVICE_FAMILY_22560)
+		return 0x00FFFFFF;
+	else
+		return 0x000FFFFF;
+}
+
 static u32 iwl_trans_pcie_read_prph(struct iwl_trans *trans, u32 reg)
 {
+	u32 mask = iwl_trans_pcie_prph_msk(trans);
+
 	iwl_trans_pcie_write32(trans, HBUS_TARG_PRPH_RADDR,
-			       ((reg & 0x000FFFFF) | (3 << 24)));
+			       ((reg & mask) | (3 << 24)));
 	return iwl_trans_pcie_read32(trans, HBUS_TARG_PRPH_RDAT);
 }
 
 static void iwl_trans_pcie_write_prph(struct iwl_trans *trans, u32 addr,
 				      u32 val)
 {
+	u32 mask = iwl_trans_pcie_prph_msk(trans);
+
 	iwl_trans_pcie_write32(trans, HBUS_TARG_PRPH_WADDR,
-			       ((addr & 0x000FFFFF) | (3 << 24)));
+			       ((addr & mask) | (3 << 24)));
 	iwl_trans_pcie_write32(trans, HBUS_TARG_PRPH_WDAT, val);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 163/191] iwlwifi: api: annotate compressed BA notif array sizes

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 6f68cc367ab6578a33cca21b6056804165621f00 ]

Annotate the compressed BA notification array sizes and
make both of them 0-length since the length of 1 is just
confusing - it may be different than that and the offset
to the second one needs to be calculated in the C code
anyhow.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/api/tx.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h
index 514b86123d3d3..80853f6cbd6d2 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/tx.h
@@ -747,9 +747,9 @@ enum iwl_mvm_ba_resp_flags {
  * @tfd_cnt: number of TFD-Q elements
  * @ra_tid_cnt: number of RATID-Q elements
  * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
- *	for details.
+ *	for details. Length in @tfd_cnt.
  * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
- *	&iwl_mvm_compressed_ba_ratid for more details.
+ *	&iwl_mvm_compressed_ba_ratid for more details. Length in @ra_tid_cnt.
  */
 struct iwl_mvm_compressed_ba_notif {
 	__le32 flags;
@@ -766,7 +766,7 @@ struct iwl_mvm_compressed_ba_notif {
 	__le32 tx_rate;
 	__le16 tfd_cnt;
 	__le16 ra_tid_cnt;
-	struct iwl_mvm_compressed_ba_tfd tfd[1];
+	struct iwl_mvm_compressed_ba_tfd tfd[0];
 	struct iwl_mvm_compressed_ba_ratid ra_tid[0];
 } __packed; /* COMPRESSED_BA_RES_API_S_VER_4 */
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 164/191] iwlwifi: pcie: gen2: build A-MSDU only for GSO

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 53f474e6a8d74d5dc0c3a015d889471f9a157685 ]

If the incoming frame should be an A-MSDU, it may already be one,
for example in the case of NAN multicast being encapsulated in an
A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the
skb actually contains GSO data.

Fixes: 6ffe5de35b05 ("iwlwifi: pcie: add AMSDU to gen2")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
index b99f33ff91230..61ffa1d1a00d7 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c
@@ -526,7 +526,12 @@ struct iwl_tfh_tfd *iwl_pcie_gen2_build_tfd(struct iwl_trans *trans,
 
 	hdr_len = ieee80211_hdrlen(hdr->frame_control);
 
-	if (amsdu)
+	/*
+	 * Only build A-MSDUs here if doing so by GSO, otherwise it may be
+	 * an A-MSDU for other reasons, e.g. NAN or an A-MSDU having been
+	 * built in the higher layers already.
+	 */
+	if (amsdu && skb_shinfo(skb)->gso_size)
 		return iwl_pcie_gen2_build_tx_amsdu(trans, txq, dev_cmd, skb,
 						    out_meta, hdr_len, len);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 165/191] iwlwifi: pcie: fit reclaim msg to MAX_MSG_LEN

[Sasha Levin]

From: Golan Ben Ami <golan.ben.ami@intel.com>

[ Upstream commit 81f0c66187e1ebb7b63529d82faf7ff1e0ef428a ]

Today, the length of a debug message in iwl_trans_pcie_reclaim
may pass the MAX_MSG_LEN, which is 110.
An example for this kind of message is:

'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2),
last_to_free 65535 is out of range [0-65536] 2 2.'

Cut the message a bit so it will fit the allowed MAX_MSG_LEN.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
index 42fdb7970cfdc..2fec394a988c1 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
@@ -1103,7 +1103,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn,
 
 	if (!iwl_queue_used(txq, last_to_free)) {
 		IWL_ERR(trans,
-			"%s: Read index for DMA queue txq id (%d), last_to_free %d is out of range [0-%d] %d %d.\n",
+			"%s: Read index for txq id (%d), last_to_free %d is out of range [0-%d] %d %d.\n",
 			__func__, txq_id, last_to_free,
 			trans->cfg->base_params->max_tfd_queue_size,
 			txq->write_ptr, txq->read_ptr);
-- 
2.20.1

[PATCH AUTOSEL 4.19 166/191] iwlwifi: mvm: use correct FIFO length

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit 7126b6f2bbdf8e25f85e7ca6d91d49ea4ce9f6a6 ]

Current FIFO size calculation is wrong for two reasons:
- We access lmac 0 by default
- We don't take 11ax into consideration.
Fix both.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac-ctxt.c |  4 ++
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c   | 47 +++++++++++++------
 2 files changed, 36 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
index b3fd20502abb3..d90d58309bf0e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c
@@ -85,6 +85,10 @@ const u8 iwl_mvm_ac_to_gen2_tx_fifo[] = {
 	IWL_GEN2_EDCA_TX_FIFO_VI,
 	IWL_GEN2_EDCA_TX_FIFO_BE,
 	IWL_GEN2_EDCA_TX_FIFO_BK,
+	IWL_GEN2_TRIG_TX_FIFO_VO,
+	IWL_GEN2_TRIG_TX_FIFO_VI,
+	IWL_GEN2_TRIG_TX_FIFO_BE,
+	IWL_GEN2_TRIG_TX_FIFO_BK,
 };
 
 struct iwl_mvm_mac_iface_iterator_data {
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 5615ce55cef56..c222ab30f660d 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -778,6 +778,36 @@ iwl_mvm_tx_tso_segment(struct sk_buff *skb, unsigned int num_subframes,
 	return 0;
 }
 
+static unsigned int iwl_mvm_max_amsdu_size(struct iwl_mvm *mvm,
+					   struct ieee80211_sta *sta,
+					   unsigned int tid)
+{
+	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	enum nl80211_band band = mvmsta->vif->bss_conf.chandef.chan->band;
+	u8 ac = tid_to_mac80211_ac[tid];
+	unsigned int txf;
+	int lmac = IWL_LMAC_24G_INDEX;
+
+	if (iwl_mvm_is_cdb_supported(mvm) &&
+	    band == NL80211_BAND_5GHZ)
+		lmac = IWL_LMAC_5G_INDEX;
+
+	/* For HE redirect to trigger based fifos */
+	if (sta->he_cap.has_he && !WARN_ON(!iwl_mvm_has_new_tx_api(mvm)))
+		ac += 4;
+
+	txf = iwl_mvm_mac_ac_to_tx_fifo(mvm, ac);
+
+	/*
+	 * Don't send an AMSDU that will be longer than the TXF.
+	 * Add a security margin of 256 for the TX command + headers.
+	 * We also want to have the start of the next packet inside the
+	 * fifo to be able to send bursts.
+	 */
+	return min_t(unsigned int, mvmsta->max_amsdu_len,
+		     mvm->fwrt.smem_cfg.lmac[lmac].txfifo_size[txf] - 256);
+}
+
 static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
 			  struct ieee80211_tx_info *info,
 			  struct ieee80211_sta *sta,
@@ -790,7 +820,7 @@ static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
 	u16 snap_ip_tcp, pad;
 	unsigned int dbg_max_amsdu_len;
 	netdev_features_t netdev_flags = NETIF_F_CSUM_MASK | NETIF_F_SG;
-	u8 tid, txf;
+	u8 tid;
 
 	snap_ip_tcp = 8 + skb_transport_header(skb) - skb_network_header(skb) +
 		tcp_hdrlen(skb);
@@ -829,20 +859,7 @@ static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
 	    !(mvmsta->amsdu_enabled & BIT(tid)))
 		return iwl_mvm_tx_tso_segment(skb, 1, netdev_flags, mpdus_skb);
 
-	max_amsdu_len = mvmsta->max_amsdu_len;
-
-	/* the Tx FIFO to which this A-MSDU will be routed */
-	txf = iwl_mvm_mac_ac_to_tx_fifo(mvm, tid_to_mac80211_ac[tid]);
-
-	/*
-	 * Don't send an AMSDU that will be longer than the TXF.
-	 * Add a security margin of 256 for the TX command + headers.
-	 * We also want to have the start of the next packet inside the
-	 * fifo to be able to send bursts.
-	 */
-	max_amsdu_len = min_t(unsigned int, max_amsdu_len,
-			      mvm->fwrt.smem_cfg.lmac[0].txfifo_size[txf] -
-			      256);
+	max_amsdu_len = iwl_mvm_max_amsdu_size(mvm, sta, tid);
 
 	if (unlikely(dbg_max_amsdu_len))
 		max_amsdu_len = min_t(unsigned int, max_amsdu_len,
-- 
2.20.1

[PATCH AUTOSEL 4.19 167/191] iwlwifi: mvm: Allow TKIP for AP mode

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 6f3df8c1192c873a6ad9a76328920f6f85af90a8 ]

Support for setting keys for TKIP cipher suite was mistakenly removed
for AP mode. Fix this.

Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
index 18db1ed92d9b0..04ea516bddcc0 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -3133,10 +3133,6 @@ static int __iwl_mvm_set_sta_key(struct iwl_mvm *mvm,
 
 	switch (keyconf->cipher) {
 	case WLAN_CIPHER_SUITE_TKIP:
-		if (vif->type == NL80211_IFTYPE_AP) {
-			ret = -EINVAL;
-			break;
-		}
 		addr = iwl_mvm_get_mac_addr(mvm, vif, sta);
 		/* get phase 1 key from mac80211 */
 		ieee80211_get_key_rx_seq(keyconf, 0, &seq);
-- 
2.20.1

[PATCH AUTOSEL 4.19 168/191] scsi: NCR5380: Clear all unissued commands on host reset

[Sasha Levin]

From: Hannes Reinecke <hare@suse.com>

[ Upstream commit 1aeeeed7f03c576f096eede7b0384f99a98f588c ]

When doing a host reset we should be clearing all outstanding commands, not
just the command triggering the reset.

[mkp: adjusted Hannes' SoB address]

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ondrey Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 5160d6214a36b..d0bbb20518048 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2303,7 +2303,7 @@ static int NCR5380_host_reset(struct scsi_cmnd *cmd)
 	spin_lock_irqsave(&hostdata->lock, flags);
 
 #if (NDEBUG & NDEBUG_ANY)
-	scmd_printk(KERN_INFO, cmd, __func__);
+	shost_printk(KERN_INFO, instance, __func__);
 #endif
 	NCR5380_dprint(NDEBUG_ANY, instance);
 	NCR5380_dprint_phase(NDEBUG_ANY, instance);
@@ -2321,10 +2321,13 @@ static int NCR5380_host_reset(struct scsi_cmnd *cmd)
 	 * commands!
 	 */
 
-	if (list_del_cmd(&hostdata->unissued, cmd)) {
+	list_for_each_entry(ncmd, &hostdata->unissued, list) {
+		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
 		cmd->result = DID_RESET << 16;
 		cmd->scsi_done(cmd);
 	}
+	INIT_LIST_HEAD(&hostdata->unissued);
 
 	if (hostdata->selecting) {
 		hostdata->selecting->result = DID_RESET << 16;
-- 
2.20.1

[PATCH AUTOSEL 4.19 169/191] scsi: NCR5380: Have NCR5380_select() return a bool

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit dad8261e643849ea134c7cd5c8e794e31d93b9eb ]

The return value is taken to mean "retry" or "don't retry". Change it to bool
to improve readability. Fix related comments. No functional change.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 46 +++++++++++++++++++-----------------------
 drivers/scsi/NCR5380.h |  2 +-
 2 files changed, 22 insertions(+), 26 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d0bbb20518048..d600d3e94ba4a 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -904,20 +904,16 @@ static irqreturn_t __maybe_unused NCR5380_intr(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-/*
- * Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd)
- *
- * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
+/**
+ * NCR5380_select - attempt arbitration and selection for a given command
+ * @instance: the Scsi_Host instance
+ * @cmd: the scsi_cmnd to execute
  *
- * Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute.
+ * This routine establishes an I_T_L nexus for a SCSI command. This involves
+ * ARBITRATION, SELECTION and MESSAGE OUT phases and an IDENTIFY message.
  *
- * Returns cmd if selection failed but should be retried,
- * NULL if selection failed and should not be retried, or
- * NULL if selection succeeded (hostdata->connected == cmd).
+ * Returns true if the operation should be retried.
+ * Returns false if it should not be retried.
  *
  * Side effects :
  * If bus busy, arbitration failed, etc, NCR5380_select() will exit
@@ -925,16 +921,15 @@ static irqreturn_t __maybe_unused NCR5380_intr(int irq, void *dev_id)
  * SELECT_ENABLE will be set appropriately, the NCR5380
  * will cease to drive any SCSI bus signals.
  *
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
+ * If successful : the I_T_L nexus will be established, and
+ * hostdata->connected will be set to cmd.
  * SELECT interrupt will be disabled.
  *
  * If failed (no target) : cmd->scsi_done() will be called, and the
  * cmd->result host byte set to DID_BAD_TARGET.
  */
 
-static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
-                                        struct scsi_cmnd *cmd)
+static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 	__releases(&hostdata->lock) __acquires(&hostdata->lock)
 {
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
@@ -942,6 +937,7 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	unsigned char *data;
 	int len;
 	int err;
+	bool ret = true;
 
 	NCR5380_dprint(NDEBUG_ARBITRATION, instance);
 	dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
@@ -950,7 +946,7 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	/*
 	 * Arbitration and selection phases are slow and involve dropping the
 	 * lock, so we have to watch out for EH. An exception handler may
-	 * change 'selecting' to NULL. This function will then return NULL
+	 * change 'selecting' to NULL. This function will then return false
 	 * so that the caller will forget about 'cmd'. (During information
 	 * transfer phases, EH may change 'connected' to NULL.)
 	 */
@@ -986,7 +982,7 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	if (!hostdata->selecting) {
 		/* Command was aborted */
 		NCR5380_write(MODE_REG, MR_BASE);
-		return NULL;
+		return false;
 	}
 	if (err < 0) {
 		NCR5380_write(MODE_REG, MR_BASE);
@@ -1035,7 +1031,7 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	if (!hostdata->selecting) {
 		NCR5380_write(MODE_REG, MR_BASE);
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-		return NULL;
+		return false;
 	}
 
 	dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
@@ -1118,13 +1114,13 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 
 		/* Can't touch cmd if it has been reclaimed by the scsi ML */
 		if (!hostdata->selecting)
-			return NULL;
+			return false;
 
 		cmd->result = DID_BAD_TARGET << 16;
 		complete_cmd(instance, cmd);
 		dsprintk(NDEBUG_SELECTION, instance,
 			"target did not respond within 250ms\n");
-		cmd = NULL;
+		ret = false;
 		goto out;
 	}
 
@@ -1156,7 +1152,7 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 	}
 	if (!hostdata->selecting) {
 		do_abort(instance);
-		return NULL;
+		return false;
 	}
 
 	dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
@@ -1172,7 +1168,7 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 		cmd->result = DID_ERROR << 16;
 		complete_cmd(instance, cmd);
 		dsprintk(NDEBUG_SELECTION, instance, "IDENTIFY message transfer failed\n");
-		cmd = NULL;
+		ret = false;
 		goto out;
 	}
 
@@ -1187,13 +1183,13 @@ static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
 
 	initialize_SCp(cmd);
 
-	cmd = NULL;
+	ret = false;
 
 out:
 	if (!hostdata->selecting)
 		return NULL;
 	hostdata->selecting = NULL;
-	return cmd;
+	return ret;
 }
 
 /*
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 8a6d002e67894..5935fd6d1a058 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -275,7 +275,7 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id);
 static void NCR5380_main(struct work_struct *work);
 static const char *NCR5380_info(struct Scsi_Host *instance);
 static void NCR5380_reselect(struct Scsi_Host *instance);
-static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
+static bool NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
 static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
 static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
 static int NCR5380_poll_politely2(struct NCR5380_hostdata *,
-- 
2.20.1

[PATCH AUTOSEL 4.19 170/191] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 7c8ed783c2faa1e3f741844ffac41340338ea0f4 ]

This is mostly needed because an AztecMonster II target has been observed
disconnecting REQUEST SENSE commands and then failing to reselect properly.

Suggested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d600d3e94ba4a..144bb0c2b3064 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -938,6 +938,8 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 	int len;
 	int err;
 	bool ret = true;
+	bool can_disconnect = instance->irq != NO_IRQ &&
+			      cmd->cmnd[0] != REQUEST_SENSE;
 
 	NCR5380_dprint(NDEBUG_ARBITRATION, instance);
 	dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
@@ -1157,7 +1159,7 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 
 	dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
 	         scmd_id(cmd));
-	tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
+	tmp[0] = IDENTIFY(can_disconnect, cmd->device->lun);
 
 	len = 1;
 	data = tmp;
-- 
2.20.1

[PATCH AUTOSEL 4.19 171/191] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 070356513963be6196142acff56acc8359069fa1 ]

When sense data is valid, call set_driver_byte(cmd, DRIVER_SENSE).  Otherwise
some callers of scsi_execute() will ignore sense data.  Don't set DID_ERROR or
DID_RESET just because sense data is missing.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 144bb0c2b3064..90136942f4882 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -513,11 +513,12 @@ static void complete_cmd(struct Scsi_Host *instance,
 
 	if (hostdata->sensing == cmd) {
 		/* Autosense processing ends here */
-		if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
+		if (status_byte(cmd->result) != GOOD) {
 			scsi_eh_restore_cmnd(cmd, &hostdata->ses);
-			set_host_byte(cmd, DID_ERROR);
-		} else
+		} else {
 			scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+			set_driver_byte(cmd, DRIVER_SENSE);
+		}
 		hostdata->sensing = NULL;
 	}
 
@@ -2265,7 +2266,6 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 	if (list_del_cmd(&hostdata->autosense, cmd)) {
 		dsprintk(NDEBUG_ABORT, instance,
 		         "abort: removed %p from sense queue\n", cmd);
-		set_host_byte(cmd, DID_ERROR);
 		complete_cmd(instance, cmd);
 	}
 
@@ -2344,7 +2344,6 @@ static int NCR5380_host_reset(struct scsi_cmnd *cmd)
 	list_for_each_entry(ncmd, &hostdata->autosense, list) {
 		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
 
-		set_host_byte(cmd, DID_RESET);
 		cmd->scsi_done(cmd);
 	}
 	INIT_LIST_HEAD(&hostdata->autosense);
-- 
2.20.1

[PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 7ef55f6744c45e3d7c85a3f74ada39b67ac741dd ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the
initiator shall not respond to a RESELECTION phase if other than two SCSI ID
bits are on the DATA BUS." This issue (too many bits set) has been observed in
the wild, so add a check.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 90136942f4882..c67f476447372 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2008,6 +2008,11 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 	NCR5380_write(MODE_REG, MR_BASE);
 
 	target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
+	if (!target_mask || target_mask & (target_mask - 1)) {
+		shost_printk(KERN_WARNING, instance,
+			     "reselect: bad target_mask 0x%02x\n", target_mask);
+		return;
+	}
 
 	dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 173/191] scsi: NCR5380: Don't clear busy flag when abort fails

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 45ddc1b24806cc8f1a09f23dd4e7b6e4a8ae36e1 ]

When NCR5380_abort() returns FAILED, the driver forgets that the target is
still busy. Hence, further commands may be sent to the target, which may fail
during selection and produce the error message, "reselection after won
arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort()
fails.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index c67f476447372..227ceb5197555 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -522,8 +522,6 @@ static void complete_cmd(struct Scsi_Host *instance,
 		hostdata->sensing = NULL;
 	}
 
-	hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
-
 	cmd->scsi_done(cmd);
 }
 
@@ -1711,6 +1709,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				cmd->result = DID_ERROR << 16;
 				complete_cmd(instance, cmd);
 				hostdata->connected = NULL;
+				hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 				return;
 #endif
 			case PHASE_DATAIN:
@@ -1793,6 +1792,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					         cmd, scmd_id(cmd), cmd->device->lun);
 
 					hostdata->connected = NULL;
+					hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 
 					cmd->result &= ~0xffff;
 					cmd->result |= cmd->SCp.Status;
@@ -1946,6 +1946,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				NCR5380_transfer_pio(instance, &phase, &len, &data);
 				if (msgout == ABORT) {
 					hostdata->connected = NULL;
+					hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 					cmd->result = DID_ERROR << 16;
 					complete_cmd(instance, cmd);
 					maybe_release_dma_irq(instance);
@@ -2100,13 +2101,16 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
 		         "reselect: removed %p from disconnected queue\n", tmp);
 	} else {
+		int target = ffs(target_mask) - 1;
+
 		shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
 		             target_mask, lun);
 		/*
 		 * Since we have an established nexus that we can't do anything
 		 * with, we must abort it.
 		 */
-		do_abort(instance);
+		if (do_abort(instance) == 0)
+			hostdata->busy[target] &= ~(1 << lun);
 		return;
 	}
 
@@ -2277,8 +2281,10 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 out:
 	if (result == FAILED)
 		dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
-	else
+	else {
+		hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
 		dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
+	}
 
 	queue_work(hostdata->work_q, &hostdata->main_task);
 	maybe_release_dma_irq(instance);
-- 
2.20.1

[PATCH AUTOSEL 4.19 174/191] scsi: NCR5380: Don't call dsprintk() following reselection interrupt

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 08267216b3f8aa5adc204bdccf8deb72c1cd7665 ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION",

    ... The reselected initiator shall then assert the BSY signal
    within a selection abort time of its most recent detection of being
    reselected; this is required for correct operation of the time-out
    procedure.

The selection abort time is only 200 us which may be insufficient time for a
printk() call. Move the diagnostics to the error paths.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 227ceb5197555..5c3ffb466bb10 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2015,8 +2015,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 		return;
 	}
 
-	dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
-
 	/*
 	 * At this point, we have detected that our SCSI ID is on the bus,
 	 * SEL is true and BSY was false for at least one bus settle delay
@@ -2029,6 +2027,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
 	if (NCR5380_poll_politely(hostdata,
 	                          STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+		shost_printk(KERN_ERR, instance, "reselect: !SEL timeout\n");
 		NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
 		return;
 	}
@@ -2040,6 +2039,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
 	if (NCR5380_poll_politely(hostdata,
 	                          STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+		shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
 		do_abort(instance);
 		return;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 175/191] scsi: NCR5380: Handle BUS FREE during reselection

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit ca694afad707cb3ae2fdef3b28454444d9ac726e ]

The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out
procedure", that a target may assert RST or go to BUS FREE phase if the
initiator does not respond within 200 us. Something like this has been
observed with AztecMonster II target. When it happens, all we can do is wait
for the target to try again.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 5c3ffb466bb10..bce6c990d060a 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2039,6 +2039,9 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
 
 	if (NCR5380_poll_politely(hostdata,
 	                          STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+		if ((NCR5380_read(STATUS_REG) & (SR_BSY | SR_SEL)) == 0)
+			/* BUS FREE phase */
+			return;
 		shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
 		do_abort(instance);
 		return;
-- 
2.20.1

[PATCH AUTOSEL 4.19 176/191] scsi: NCR5380: Check for bus reset

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 6b0e87a6aafe12d75c2bea6fc8e49e88b98b3083 ]

The SR_RST bit isn't latched. Hence, detecting a bus reset isn't reliable.
When it is detected, the right thing to do is to drop all connected and
disconnected commands. The code for that is already present so refactor it and
call it when SR_RST is set.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 74 +++++++++++++++++++++++++-----------------
 1 file changed, 45 insertions(+), 29 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index bce6c990d060a..8ec68dcc0cc4a 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -131,6 +131,7 @@
 
 static int do_abort(struct Scsi_Host *);
 static void do_reset(struct Scsi_Host *);
+static void bus_reset_cleanup(struct Scsi_Host *);
 
 /**
  * initialize_SCp - init the scsi pointer field
@@ -885,7 +886,14 @@ static irqreturn_t __maybe_unused NCR5380_intr(int irq, void *dev_id)
 			/* Probably Bus Reset */
 			NCR5380_read(RESET_PARITY_INTERRUPT_REG);
 
-			dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
+			if (sr & SR_RST) {
+				/* Certainly Bus Reset */
+				shost_printk(KERN_WARNING, instance,
+					     "bus reset interrupt\n");
+				bus_reset_cleanup(instance);
+			} else {
+				dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
+			}
 #ifdef SUN3_SCSI_VME
 			dregs->csr |= CSR_DMA_ENABLE;
 #endif
@@ -2297,31 +2305,12 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
 }
 
 
-/**
- * NCR5380_host_reset - reset the SCSI host
- * @cmd: SCSI command undergoing EH
- *
- * Returns SUCCESS
- */
-
-static int NCR5380_host_reset(struct scsi_cmnd *cmd)
+static void bus_reset_cleanup(struct Scsi_Host *instance)
 {
-	struct Scsi_Host *instance = cmd->device->host;
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int i;
-	unsigned long flags;
 	struct NCR5380_cmd *ncmd;
 
-	spin_lock_irqsave(&hostdata->lock, flags);
-
-#if (NDEBUG & NDEBUG_ANY)
-	shost_printk(KERN_INFO, instance, __func__);
-#endif
-	NCR5380_dprint(NDEBUG_ANY, instance);
-	NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
-	do_reset(instance);
-
 	/* reset NCR registers */
 	NCR5380_write(MODE_REG, MR_BASE);
 	NCR5380_write(TARGET_COMMAND_REG, 0);
@@ -2333,14 +2322,6 @@ static int NCR5380_host_reset(struct scsi_cmnd *cmd)
 	 * commands!
 	 */
 
-	list_for_each_entry(ncmd, &hostdata->unissued, list) {
-		struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
-
-		cmd->result = DID_RESET << 16;
-		cmd->scsi_done(cmd);
-	}
-	INIT_LIST_HEAD(&hostdata->unissued);
-
 	if (hostdata->selecting) {
 		hostdata->selecting->result = DID_RESET << 16;
 		complete_cmd(instance, hostdata->selecting);
@@ -2374,6 +2355,41 @@ static int NCR5380_host_reset(struct scsi_cmnd *cmd)
 
 	queue_work(hostdata->work_q, &hostdata->main_task);
 	maybe_release_dma_irq(instance);
+}
+
+/**
+ * NCR5380_host_reset - reset the SCSI host
+ * @cmd: SCSI command undergoing EH
+ *
+ * Returns SUCCESS
+ */
+
+static int NCR5380_host_reset(struct scsi_cmnd *cmd)
+{
+	struct Scsi_Host *instance = cmd->device->host;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
+	unsigned long flags;
+	struct NCR5380_cmd *ncmd;
+
+	spin_lock_irqsave(&hostdata->lock, flags);
+
+#if (NDEBUG & NDEBUG_ANY)
+	shost_printk(KERN_INFO, instance, __func__);
+#endif
+	NCR5380_dprint(NDEBUG_ANY, instance);
+	NCR5380_dprint_phase(NDEBUG_ANY, instance);
+
+	list_for_each_entry(ncmd, &hostdata->unissued, list) {
+		struct scsi_cmnd *scmd = NCR5380_to_scmd(ncmd);
+
+		scmd->result = DID_RESET << 16;
+		scmd->scsi_done(scmd);
+	}
+	INIT_LIST_HEAD(&hostdata->unissued);
+
+	do_reset(instance);
+	bus_reset_cleanup(instance);
+
 	spin_unlock_irqrestore(&hostdata->lock, flags);
 
 	return SUCCESS;
-- 
2.20.1

[PATCH AUTOSEL 4.19 177/191] arm64: dts: amd: Fix SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]

dtc has new checks for SPI buses. Fix the warnings in node names.

arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'

Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 125f4deb52fe9..b664e7af74eb3 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -107,7 +107,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		spi0: ssp@e1020000 {
+		spi0: spi@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
@@ -117,7 +117,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		spi1: ssp@e1030000 {
+		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 178/191] arm64: dts: lg: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 09bae3b64cb580c95329bd8d16f08f0a5cb81ec9 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/lg/lg1312.dtsi | 4 ++--
 arch/arm64/boot/dts/lg/lg1313.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 860c8fb107950..4bde7b6f2b113 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -168,14 +168,14 @@
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 1887af654a7db..16ced1ff1ad36 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -168,14 +168,14 @@
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 179/191] ARM: dts: lpc32xx: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 11236ef582b8d66290bb3b3710e03ca1d85d8ad8 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 4981741377f3a..ed0d6fb20122a 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@
 			 * ssp0 and spi1 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp0: ssp@20084000 {
+			ssp0: spi@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
 			 * ssp1 and spi2 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp1: ssp@2008c000 {
+			ssp1: spi@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 180/191] rtc: isl1208: avoid possible sysfs race

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 1b4c794fda583edabe864ac466e9cd43c707be80 ]

Use rtc_add_group to add the common sysfs group to avoid a possible race
condition.

[Denis.Osterland@diehl.com: use to_i2c_client(dev->parent)]
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The move of atrim, dtrim usr sysfs properties from i2c device
to rtc device require to access them via dev->parent.
This patch also aligns timestamp0.

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-isl1208.c | 27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index ea18a8f4bce06..033f65aef5788 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -518,7 +518,7 @@ static ssize_t timestamp0_store(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct i2c_client *client = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
 	int sr;
 
 	sr = isl1208_i2c_get_sr(client);
@@ -540,7 +540,7 @@ static ssize_t timestamp0_store(struct device *dev,
 static ssize_t timestamp0_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	struct i2c_client *client = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
 	u8 regs[ISL1219_EVT_SECTION_LEN] = { 0, };
 	struct rtc_time tm;
 	int sr;
@@ -650,7 +650,7 @@ static ssize_t
 isl1208_sysfs_show_atrim(struct device *dev,
 			 struct device_attribute *attr, char *buf)
 {
-	int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+	int atr = isl1208_i2c_get_atr(to_i2c_client(dev->parent));
 	if (atr < 0)
 		return atr;
 
@@ -663,7 +663,7 @@ static ssize_t
 isl1208_sysfs_show_dtrim(struct device *dev,
 			 struct device_attribute *attr, char *buf)
 {
-	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+	int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev->parent));
 	if (dtr < 0)
 		return dtr;
 
@@ -676,7 +676,7 @@ static ssize_t
 isl1208_sysfs_show_usr(struct device *dev,
 		       struct device_attribute *attr, char *buf)
 {
-	int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+	int usr = isl1208_i2c_get_usr(to_i2c_client(dev->parent));
 	if (usr < 0)
 		return usr;
 
@@ -701,7 +701,10 @@ isl1208_sysfs_store_usr(struct device *dev,
 	if (usr < 0 || usr > 0xffff)
 		return -EINVAL;
 
-	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+	if (isl1208_i2c_set_usr(to_i2c_client(dev->parent), usr))
+		return -EIO;
+
+	return count;
 }
 
 static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
@@ -765,7 +768,6 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	rtc->ops = &isl1208_rtc_ops;
 
 	i2c_set_clientdata(client, rtc);
-	dev_set_drvdata(&rtc->dev, client);
 
 	rc = isl1208_i2c_get_sr(client);
 	if (rc < 0) {
@@ -804,7 +806,7 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		evdet_irq = of_irq_get_byname(np, "evdet");
 	}
 
-	rc = sysfs_create_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
+	rc = rtc_add_group(rtc, &isl1208_rtc_sysfs_files);
 	if (rc)
 		return rc;
 
@@ -821,14 +823,6 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return rtc_register_device(rtc);
 }
 
-static int
-isl1208_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &isl1208_rtc_sysfs_files);
-
-	return 0;
-}
-
 static const struct i2c_device_id isl1208_id[] = {
 	{ "isl1208", TYPE_ISL1208 },
 	{ "isl1218", TYPE_ISL1218 },
@@ -851,7 +845,6 @@ static struct i2c_driver isl1208_driver = {
 		.of_match_table = of_match_ptr(isl1208_of_match),
 	},
 	.probe = isl1208_probe,
-	.remove = isl1208_remove,
 	.id_table = isl1208_id,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 181/191] rtc: tx4939: fixup nvmem name and register size

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 2ab78755e93a10f6216c860a2012f3592f395603 ]

The default word_size and stride of 1 are correct for the tx4939. Also fix
the nvmem folder name.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-tx4939.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-tx4939.c b/drivers/rtc/rtc-tx4939.c
index 08dbefc79520e..61c110b2045f8 100644
--- a/drivers/rtc/rtc-tx4939.c
+++ b/drivers/rtc/rtc-tx4939.c
@@ -253,9 +253,7 @@ static int __init tx4939_rtc_probe(struct platform_device *pdev)
 	struct resource *res;
 	int irq, ret;
 	struct nvmem_config nvmem_cfg = {
-		.name = "rv8803_nvram",
-		.word_size = 4,
-		.stride = 4,
+		.name = "tx4939_nvram",
 		.size = TX4939_RTC_REG_RAMSIZE,
 		.reg_read = tx4939_nvram_read,
 		.reg_write = tx4939_nvram_write,
-- 
2.20.1

[PATCH AUTOSEL 4.19 182/191] rtc: armada38x: fix possible race condition

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 7d61cbb945a753af08e247b5f10bdd5dbb8d6c80 ]

The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-armada38x.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c
index bde53c8ccee2c..b74338d6dde60 100644
--- a/drivers/rtc/rtc-armada38x.c
+++ b/drivers/rtc/rtc-armada38x.c
@@ -514,7 +514,6 @@ MODULE_DEVICE_TABLE(of, armada38x_rtc_of_match_table);
 
 static __init int armada38x_rtc_probe(struct platform_device *pdev)
 {
-	const struct rtc_class_ops *ops;
 	struct resource *res;
 	struct armada38x_rtc *rtc;
 	const struct of_device_id *match;
@@ -551,6 +550,11 @@ static __init int armada38x_rtc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "no irq\n");
 		return rtc->irq;
 	}
+
+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
 	if (devm_request_irq(&pdev->dev, rtc->irq, armada38x_rtc_alarm_irq,
 				0, pdev->name, rtc) < 0) {
 		dev_warn(&pdev->dev, "Interrupt not available.\n");
@@ -560,28 +564,24 @@ static __init int armada38x_rtc_probe(struct platform_device *pdev)
 
 	if (rtc->irq != -1) {
 		device_init_wakeup(&pdev->dev, 1);
-		ops = &armada38x_rtc_ops;
+		rtc->rtc_dev->ops = &armada38x_rtc_ops;
 	} else {
 		/*
 		 * If there is no interrupt available then we can't
 		 * use the alarm
 		 */
-		ops = &armada38x_rtc_ops_noirq;
+		rtc->rtc_dev->ops = &armada38x_rtc_ops_noirq;
 	}
 	rtc->data = (struct armada38x_rtc_data *)match->data;
 
-
 	/* Update RTC-MBUS bridge timing parameters */
 	rtc->data->update_mbus_timing(rtc);
 
-	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
-						ops, THIS_MODULE);
-	if (IS_ERR(rtc->rtc_dev)) {
-		ret = PTR_ERR(rtc->rtc_dev);
+	ret = rtc_register_device(rtc->rtc_dev);
+	if (ret)
 		dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
-		return ret;
-	}
-	return 0;
+
+	return ret;
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.20.1

[PATCH AUTOSEL 4.19 183/191] netfilter: masquerade: don't flush all conntracks if only one address deleted on device

[Sasha Levin]

From: Tan Hu <tan.hu@zte.com.cn>

[ Upstream commit 097f95d319f817e651bd51f8846aced92a55a6a1 ]

We configured iptables as below, which only allowed incoming data on
established connections:

iptables -t mangle -A PREROUTING -m state --state ESTABLISHED -j ACCEPT
iptables -t mangle -P PREROUTING DROP

When deleting a secondary address, current masquerade implements would
flush all conntracks on this device. All the established connections on
primary address also be deleted, then subsequent incoming data on the
connections would be dropped wrongly because it was identified as NEW
connection.

So when an address was delete, it should only flush connections related
with the address.

Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/netfilter/nf_nat_masquerade_ipv4.c | 22 ++++++++++++++++++---
 net/ipv6/netfilter/nf_nat_masquerade_ipv6.c | 19 +++++++++++++++---
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
index 4c7fcd32f8e62..41327bb990932 100644
--- a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
+++ b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
@@ -104,12 +104,26 @@ static int masq_device_event(struct notifier_block *this,
 	return NOTIFY_DONE;
 }
 
+static int inet_cmp(struct nf_conn *ct, void *ptr)
+{
+	struct in_ifaddr *ifa = (struct in_ifaddr *)ptr;
+	struct net_device *dev = ifa->ifa_dev->dev;
+	struct nf_conntrack_tuple *tuple;
+
+	if (!device_cmp(ct, (void *)(long)dev->ifindex))
+		return 0;
+
+	tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
+
+	return ifa->ifa_address == tuple->dst.u3.ip;
+}
+
 static int masq_inet_event(struct notifier_block *this,
 			   unsigned long event,
 			   void *ptr)
 {
 	struct in_device *idev = ((struct in_ifaddr *)ptr)->ifa_dev;
-	struct netdev_notifier_info info;
+	struct net *net = dev_net(idev->dev);
 
 	/* The masq_dev_notifier will catch the case of the device going
 	 * down.  So if the inetdev is dead and being destroyed we have
@@ -119,8 +133,10 @@ static int masq_inet_event(struct notifier_block *this,
 	if (idev->dead)
 		return NOTIFY_DONE;
 
-	netdev_notifier_info_init(&info, idev->dev);
-	return masq_device_event(this, event, &info);
+	if (event == NETDEV_DOWN)
+		nf_ct_iterate_cleanup_net(net, inet_cmp, ptr, 0, 0);
+
+	return NOTIFY_DONE;
 }
 
 static struct notifier_block masq_dev_notifier = {
diff --git a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
index 37b1d413c825b..0ad0da5a26002 100644
--- a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
+++ b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
@@ -87,18 +87,30 @@ static struct notifier_block masq_dev_notifier = {
 struct masq_dev_work {
 	struct work_struct work;
 	struct net *net;
+	struct in6_addr addr;
 	int ifindex;
 };
 
+static int inet_cmp(struct nf_conn *ct, void *work)
+{
+	struct masq_dev_work *w = (struct masq_dev_work *)work;
+	struct nf_conntrack_tuple *tuple;
+
+	if (!device_cmp(ct, (void *)(long)w->ifindex))
+		return 0;
+
+	tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
+
+	return ipv6_addr_equal(&w->addr, &tuple->dst.u3.in6);
+}
+
 static void iterate_cleanup_work(struct work_struct *work)
 {
 	struct masq_dev_work *w;
-	long index;
 
 	w = container_of(work, struct masq_dev_work, work);
 
-	index = w->ifindex;
-	nf_ct_iterate_cleanup_net(w->net, device_cmp, (void *)index, 0, 0);
+	nf_ct_iterate_cleanup_net(w->net, inet_cmp, (void *)w, 0, 0);
 
 	put_net(w->net);
 	kfree(w);
@@ -147,6 +159,7 @@ static int masq_inet6_event(struct notifier_block *this,
 		INIT_WORK(&w->work, iterate_cleanup_work);
 		w->ifindex = dev->ifindex;
 		w->net = net;
+		w->addr = ifa->addr;
 		schedule_work(&w->work);
 
 		return NOTIFY_DONE;
-- 
2.20.1

[PATCH AUTOSEL 4.19 184/191] usb: xhci-mtk: fix ISOC error when interval is zero

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit 87173acc0d8f0987bda8827da35fff67f52ad15d ]

If the interval equal zero, needn't round up to power of two
for the number of packets in each ESIT, so fix it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mtk-sch.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index fa33d6e5b1cbd..d04fdd173ed2e 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -113,7 +113,9 @@ static void setup_sch_info(struct usb_device *udev,
 		}
 
 		if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) {
-			if (esit_pkts <= sch_ep->esit)
+			if (sch_ep->esit == 1)
+				sch_ep->pkts = esit_pkts;
+			else if (esit_pkts <= sch_ep->esit)
 				sch_ep->pkts = 1;
 			else
 				sch_ep->pkts = roundup_pow_of_two(esit_pkts)
-- 
2.20.1

[PATCH AUTOSEL 4.19 185/191] usb: usbtmc: uninitialized symbol 'actual' in usbtmc_ioctl_clear

[Sasha Levin]

From: Guido Kiener <guido.kiener@rohde-schwarz.com>

[ Upstream commit 9a83190300867fb024d53f47c31088e34188efc1 ]

Fix uninitialized symbol 'actual' in function usbtmc_ioctl_clear.

When symbol 'actual' is not initialized and usb_bulk_msg() fails,
the subsequent kernel debug message shows a random value.

Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Fixes: dfee02ac4bce ("usb: usbtmc: Fix ioctl USBTMC_IOCTL_CLEAR")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/class/usbtmc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3ce45c9e9d20d..e6a7c86b70f25 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1016,6 +1016,7 @@ static int usbtmc_ioctl_clear(struct usbtmc_device_data *data)
 		do {
 			dev_dbg(dev, "Reading from bulk in EP\n");
 
+			actual = 0;
 			rv = usb_bulk_msg(data->usb_dev,
 					  usb_rcvbulkpipe(data->usb_dev,
 							  data->bulk_in),
-- 
2.20.1

[PATCH AUTOSEL 4.19 186/191] fuse: use READ_ONCE on congestion_threshold and max_background

[Sasha Levin]

From: Kirill Tkhai <ktkhai@virtuozzo.com>

[ Upstream commit 2a23f2b8adbe4bd584f936f7ac17a99750eed9d7 ]

Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fuse/control.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 0b694655d9880..acc35819aae64 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -107,7 +107,7 @@ static ssize_t fuse_conn_max_background_read(struct file *file,
 	if (!fc)
 		return 0;
 
-	val = fc->max_background;
+	val = READ_ONCE(fc->max_background);
 	fuse_conn_put(fc);
 
 	return fuse_conn_limit_read(file, buf, len, ppos, val);
@@ -144,7 +144,7 @@ static ssize_t fuse_conn_congestion_threshold_read(struct file *file,
 	if (!fc)
 		return 0;
 
-	val = fc->congestion_threshold;
+	val = READ_ONCE(fc->congestion_threshold);
 	fuse_conn_put(fc);
 
 	return fuse_conn_limit_read(file, buf, len, ppos, val);
-- 
2.20.1

[PATCH AUTOSEL 4.19 187/191] IB/iser: Fix possible NULL deref at iser_inv_desc()

[Sasha Levin]

From: Israel Rukshin <israelr@mellanox.com>

[ Upstream commit 65f07f5a09dacf3b60619f196f096ea3671a5eda ]

In case target remote invalidates bogus rkey and signature is not used,
pi_ctx is NULL deref.

The commit also fails the connection on bogus remote invalidation.

Fixes: 59caaed7a72a ("IB/iser: Support the remote invalidation exception")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/iser/iser_initiator.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 2f6388596f886..96af06cfe0afd 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -589,13 +589,19 @@ void iser_login_rsp(struct ib_cq *cq, struct ib_wc *wc)
 	ib_conn->post_recv_buf_count--;
 }
 
-static inline void
+static inline int
 iser_inv_desc(struct iser_fr_desc *desc, u32 rkey)
 {
-	if (likely(rkey == desc->rsc.mr->rkey))
+	if (likely(rkey == desc->rsc.mr->rkey)) {
 		desc->rsc.mr_valid = 0;
-	else if (likely(rkey == desc->pi_ctx->sig_mr->rkey))
+	} else if (likely(desc->pi_ctx && rkey == desc->pi_ctx->sig_mr->rkey)) {
 		desc->pi_ctx->sig_mr_valid = 0;
+	} else {
+		iser_err("Bogus remote invalidation for rkey %#x\n", rkey);
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
 static int
@@ -623,12 +629,14 @@ iser_check_remote_inv(struct iser_conn *iser_conn,
 
 			if (iser_task->dir[ISER_DIR_IN]) {
 				desc = iser_task->rdma_reg[ISER_DIR_IN].mem_h;
-				iser_inv_desc(desc, rkey);
+				if (unlikely(iser_inv_desc(desc, rkey)))
+					return -EINVAL;
 			}
 
 			if (iser_task->dir[ISER_DIR_OUT]) {
 				desc = iser_task->rdma_reg[ISER_DIR_OUT].mem_h;
-				iser_inv_desc(desc, rkey);
+				if (unlikely(iser_inv_desc(desc, rkey)))
+					return -EINVAL;
 			}
 		} else {
 			iser_err("failed to get task for itt=%d\n", hdr->itt);
-- 
2.20.1

[PATCH AUTOSEL 4.19 188/191] media: ov2680: fix null dereference at power on

[Sasha Levin]

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit c45fbdf24c61a7b7a37f1b3bbd46f054637a3627 ]

Swapping the order between v4l2 subdevice registration and checking chip
id in b7a417628abf ("media: ov2680: don't register the v4l2 subdevice
before checking chip ID") makes the mode restore to use the sensor
controls before they are set, so move the mode restore call to s_power
after the handler setup for controls is done.

This remove also the need for the error code path in power on function.

Fixes: b7a417628abf ("media: ov2680: don't register the v4l2 subdevice before checking chip ID")

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2680.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/media/i2c/ov2680.c b/drivers/media/i2c/ov2680.c
index 3ccd584568fb5..d8798fb714ba8 100644
--- a/drivers/media/i2c/ov2680.c
+++ b/drivers/media/i2c/ov2680.c
@@ -568,10 +568,6 @@ static int ov2680_power_on(struct ov2680_dev *sensor)
 	if (ret < 0)
 		return ret;
 
-	ret = ov2680_mode_restore(sensor);
-	if (ret < 0)
-		goto disable;
-
 	sensor->is_enabled = true;
 
 	/* Set clock lane into LP-11 state */
@@ -580,12 +576,6 @@ static int ov2680_power_on(struct ov2680_dev *sensor)
 	ov2680_stream_disable(sensor);
 
 	return 0;
-
-disable:
-	dev_err(dev, "failed to enable sensor: %d\n", ret);
-	ov2680_power_off(sensor);
-
-	return ret;
 }
 
 static int ov2680_s_power(struct v4l2_subdev *sd, int on)
@@ -606,6 +596,8 @@ static int ov2680_s_power(struct v4l2_subdev *sd, int on)
 		ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
 		if (ret < 0)
 			return ret;
+
+		ret = ov2680_mode_restore(sensor);
 	}
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.19 189/191] s390/vdso: correct vdso mapping for compat tasks

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit 190f056fba230abee80712eb810939ef9a8c462f ]

While "s390/vdso: avoid 64-bit vdso mapping for compat tasks" fixed
64-bit vdso mapping for compat tasks under gdb it introduced another
problem. "compat_mm" flag is not inherited during fork and when
31-bit process forks a child (but does not perform exec) it ends up
with 64-bit vdso. To address that, init_new_context (which is called
during fork and exec) now initialize compat_mm based on thread TIF_31BIT
flag. Later compat_mm is adjusted in arch_setup_additional_pages, which
is called during exec.

Fixes: d1befa65823e ("s390/vdso: avoid 64-bit vdso mapping for compat tasks")
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/mmu_context.h | 2 +-
 arch/s390/kernel/vdso.c             | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index e4462202200d7..8d04e6f3f7964 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -25,7 +25,7 @@ static inline int init_new_context(struct task_struct *tsk,
 	atomic_set(&mm->context.flush_count, 0);
 	mm->context.gmap_asce = 0;
 	mm->context.flush_mm = 0;
-	mm->context.compat_mm = 0;
+	mm->context.compat_mm = test_thread_flag(TIF_31BIT);
 #ifdef CONFIG_PGSTE
 	mm->context.alloc_pgste = page_table_allocate_pgste ||
 		test_thread_flag(TIF_PGSTE) ||
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index ec31b48a42a52..7ab7d256d1eb7 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -224,10 +224,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 
 	vdso_pages = vdso64_pages;
 #ifdef CONFIG_COMPAT
-	if (is_compat_task()) {
+	mm->context.compat_mm = is_compat_task();
+	if (mm->context.compat_mm)
 		vdso_pages = vdso32_pages;
-		mm->context.compat_mm = 1;
-	}
 #endif
 	/*
 	 * vDSO has a problem and was disabled, just don't "enable" it for
-- 
2.20.1

[PATCH AUTOSEL 4.19 190/191] net: phy: mdio-bcm-unimac: mark PM functions as __maybe_unused

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9b97123a584f60a5bca5a2663485768a1f6cd0a4 ]

The newly added runtime-pm support causes a harmless warning
when CONFIG_PM is disabled:

drivers/net/phy/mdio-bcm-unimac.c:330:12: error: 'unimac_mdio_resume' defined but not used [-Werror=unused-function]
 static int unimac_mdio_resume(struct device *d)
drivers/net/phy/mdio-bcm-unimac.c:321:12: error: 'unimac_mdio_suspend' defined but not used [-Werror=unused-function]
 static int unimac_mdio_suspend(struct device *d)

Marking the functions as __maybe_unused is the easiest workaround
and avoids adding #ifdef checks.

Fixes: b78ac6ecd1b6 ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mdio-bcm-unimac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 80b9583eaa952..df75efa96a7d9 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -318,7 +318,7 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int unimac_mdio_suspend(struct device *d)
+static int __maybe_unused unimac_mdio_suspend(struct device *d)
 {
 	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
 
@@ -327,7 +327,7 @@ static int unimac_mdio_suspend(struct device *d)
 	return 0;
 }
 
-static int unimac_mdio_resume(struct device *d)
+static int __maybe_unused unimac_mdio_resume(struct device *d)
 {
 	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
 	int ret;
-- 
2.20.1

[PATCH AUTOSEL 4.19 191/191] x86/efi: fix a -Wtype-limits compilation warning

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 919aef44d73d5d0c04213cb1bc31149cc074e65e ]

Compiling a kernel with W=1 generates this warning,

arch/x86/platform/efi/quirks.c:731:16: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]

Fixes: 3425d934fc03 ("efi/x86: Handle page faults occurring while running ...")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: "Prakhya, Sai Praneeth" <sai.praneeth.prakhya@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 669babcaf245a..c75d5ba732f18 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -684,7 +684,7 @@ void efi_recover_from_page_fault(unsigned long phys_addr)
 	 * Address range 0x0000 - 0x0fff is always mapped in the efi_pgd, so
 	 * page faulting on these addresses isn't expected.
 	 */
-	if (phys_addr >= 0x0000 && phys_addr <= 0x0fff)
+	if (phys_addr <= 0x0fff)
 		return;
 
 	/*
-- 
2.20.1