[PATCH 5.4 00/68] 5.4.237-rc1 review

[PATCH 5.4 00/68] 5.4.237-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.237 release.
There are 68 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.237-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.237-rc1

Stefan Haberland <sth@linux.ibm.com>
    s390/dasd: add missing discipline function

Masahiro Yamada <masahiroy@kernel.org>
    UML: define RUNTIME_DISCARD_EXIT

Tom Saeger <tom.saeger@oracle.com>
    sh: define RUNTIME_DISCARD_EXIT

Masahiro Yamada <masahiroy@kernel.org>
    s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT

Masahiro Yamada <masahiroy@kernel.org>
    arch: fix broken BuildID for arm64 and riscv

H.J. Lu <hjl.tools@gmail.com>
    x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS

John Harrison <John.C.Harrison@Intel.com>
    drm/i915: Don't use BAR mappings for ring buffers with LLC

Corey Minyard <cminyard@mvista.com>
    ipmi:watchdog: Set panic count to proper value on a panic

Yejune Deng <yejune.deng@gmail.com>
    ipmi/watchdog: replace atomic_add() and atomic_sub()

Paul Elder <paul.elder@ideasonboard.com>
    media: ov5640: Fix analogue gain control

Alvaro Karsz <alvaro.karsz@solid-run.com>
    PCI: Avoid FLR for SolidRun SNET DPU rev 1

Alvaro Karsz <alvaro.karsz@solid-run.com>
    PCI: Add SolidRun vendor ID

Nathan Chancellor <nathan@kernel.org>
    macintosh: windfarm: Use unsigned type for 1-bit bitfields

Edward Humes <aurxenon@lunos.org>
    alpha: fix R_ALPHA_LITERAL reloc for large modules

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc: Check !irq instead of irq == NO_IRQ and remove NO_IRQ

xurui <xurui@kylinos.cn>
    MIPS: Fix a compilation issue

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    clk: qcom: mmcc-apq8084: remove spdm clocks

Jan Kara <jack@suse.cz>
    ext4: Fix deadlock during directory rename

Alexandre Ghiti <alexghiti@rivosinc.com>
    riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode

D. Wythe <alibuda@linux.alibaba.com>
    net/smc: fix fallback failed while sendmsg with fastopen

Chandrakanth Patil <chandrakanth.patil@broadcom.com>
    scsi: megaraid_sas: Update max supported LD IDs to 240

Lorenz Bauer <lorenz.bauer@isovalent.com>
    btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

Florian Westphal <fw@strlen.de>
    netfilter: tproxy: fix deadlock due to missing BH disable

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Avoid order-5 memory allocation for TPA data

Shigeru Yoshida <syoshida@redhat.com>
    net: caif: Fix use-after-free in cfusbl_device_notify()

Yuiko Oshino <yuiko.oshino@microchip.com>
    net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver

Lee Jones <lee.jones@linaro.org>
    net: usb: lan78xx: Remove lots of set but unused 'ret' variables

Hangbin Liu <liuhangbin@gmail.com>
    selftests: nft_nat: ensuring the listening side is up before starting the client

Eric Dumazet <edumazet@google.com>
    ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()

Kang Chen <void0red@gmail.com>
    nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register

Jan Kara <jack@suse.cz>
    ext4: Fix possible corruption when moving a directory

Bart Van Assche <bvanassche@acm.org>
    scsi: core: Remove the /proc/scsi/${proc_name} directory earlier

Volker Lendecke <vl@samba.org>
    cifs: Fix uninitialized memory read in smb3_qfs_tcon()

Amir Goldstein <amir73il@gmail.com>
    SMB3: Backup intent flag missing from some more ops

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ARM: dts: exynos: correct TMU phandle in Odroid XU3 family

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ARM: dts: exynos: correct TMU phandle in Odroid HC1

Marek Szyprowski <m.szyprowski@samsung.com>
    ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ARM: dts: exynos: correct TMU phandle in Exynos5250

Krzysztof Kozlowski <krzk@kernel.org>
    ARM: dts: exynos: Override thermal by label in Exynos5250

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ARM: dts: exynos: correct TMU phandle in Exynos4210

Krzysztof Kozlowski <krzk@kernel.org>
    ARM: dts: exynos: Override thermal by label in Exynos4210

Jacob Pan <jacob.jun.pan@linux.intel.com>
    iommu/vt-d: Fix PASID directory pointer coherency

Marc Zyngier <maz@kernel.org>
    irqdomain: Fix domain registration race

Bixuan Cui <cuibixuan@huawei.com>
    irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent

Corey Minyard <cminyard@mvista.com>
    ipmi:ssif: Add a timer between request retries

Corey Minyard <cminyard@mvista.com>
    ipmi:ssif: Increase the message retry time

Corey Minyard <cminyard@mvista.com>
    ipmi:ssif: Remove rtc_us_timer

Corey Minyard <cminyard@mvista.com>
    ipmi:ssif: resend_msg() cannot fail

Liguang Zhang <zhangliguang@linux.alibaba.com>
    ipmi:ssif: make ssif_i2c_send() void

Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
    iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter

Kim Phillips <kim.phillips@amd.com>
    iommu/amd: Fix ill-formed ivrs_ioapic, ivrs_hpet and ivrs_acpihid options

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    iommu/amd: Add PCI segment support for ivrs_[ioapic/hpet/acpihid] commands

Jani Nikula <jani.nikula@intel.com>
    drm/edid: fix AVI infoframe aspect ratio handling

Wayne Lin <Wayne.Lin@amd.com>
    drm/edid: Add aspect ratios to HDMI 4K modes

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/edid: Fix HDMI VIC handling

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/edid: Extract drm_mode_cea_vic()

Fedor Pchelkin <pchelkin@ispras.ru>
    nfc: change order inside nfc_se_io error path

Zhihao Cheng <chengzhihao1@huawei.com>
    ext4: zero i_disksize when initializing the bootloader inode

Ye Bin <yebin10@huawei.com>
    ext4: fix WARNING in ext4_update_inline_data

Ye Bin <yebin10@huawei.com>
    ext4: move where set the MAY_INLINE_DATA flag is set

Darrick J. Wong <djwong@kernel.org>
    ext4: fix another off-by-one fsmap error on 1k block filesystems

Eric Whitney <enwlinux@gmail.com>
    ext4: fix RENAME_WHITEOUT handling for inline directories

Harry Wentland <harry.wentland@amd.com>
    drm/connector: print max_requested_bpc in state debugfs

Andrew Cooper <andrew.cooper3@citrix.com>
    x86/CPU/AMD: Disable XSAVES on AMD family 0x17

Theodore Ts'o <tytso@mit.edu>
    fs: prevent out-of-bounds array speculation when closing a file descriptor


-------------

Diffstat:

 Documentation/admin-guide/kernel-parameters.txt    |  51 +++-
 Makefile                                           |   4 +-
 arch/alpha/kernel/module.c                         |   4 +-
 arch/arm/boot/dts/exynos4210.dtsi                  |  35 ++-
 arch/arm/boot/dts/exynos5250.dtsi                  |  38 ++-
 arch/arm/boot/dts/exynos5422-odroidhc1.dts         |  38 ++-
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  67 ++++-
 arch/mips/include/asm/mach-rc32434/pci.h           |   2 +-
 arch/powerpc/include/asm/irq.h                     |   3 -
 arch/powerpc/kernel/vmlinux.lds.S                  |   6 +-
 arch/powerpc/platforms/44x/fsp2.c                  |   2 +-
 arch/riscv/kernel/stacktrace.c                     |   2 +-
 arch/s390/kernel/vmlinux.lds.S                     |   2 +
 arch/sh/kernel/vmlinux.lds.S                       |   1 +
 arch/um/kernel/vmlinux.lds.S                       |   2 +-
 arch/x86/kernel/cpu/amd.c                          |   9 +
 arch/x86/kernel/vmlinux.lds.S                      |   2 +
 drivers/char/ipmi/ipmi_ssif.c                      | 146 ++++-------
 drivers/char/ipmi/ipmi_watchdog.c                  |   8 +-
 drivers/clk/qcom/mmcc-apq8084.c                    | 271 ---------------------
 drivers/gpu/drm/drm_atomic.c                       |   1 +
 drivers/gpu/drm/drm_edid.c                         | 130 ++++++----
 drivers/gpu/drm/i915/gt/intel_ringbuffer.c         |   4 +-
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c              |   4 +-
 drivers/iommu/amd_iommu_init.c                     | 105 ++++++--
 drivers/iommu/intel-pasid.c                        |   7 +
 drivers/macintosh/windfarm_lm75_sensor.c           |   4 +-
 drivers/macintosh/windfarm_smu_sensors.c           |   4 +-
 drivers/media/i2c/ov5640.c                         |   2 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |  23 +-
 drivers/net/phy/microchip.c                        |  32 +++
 drivers/net/usb/lan78xx.c                          | 189 ++++++--------
 drivers/nfc/fdp/i2c.c                              |   4 +
 drivers/pci/quirks.c                               |   8 +
 drivers/s390/block/dasd_diag.c                     |   7 +-
 drivers/s390/block/dasd_fba.c                      |   7 +-
 drivers/s390/block/dasd_int.h                      |   1 -
 drivers/scsi/hosts.c                               |   2 +
 drivers/scsi/megaraid/megaraid_sas.h               |   2 +
 drivers/scsi/megaraid/megaraid_sas_fp.c            |   2 +-
 fs/cifs/cifsacl.c                                  |  14 +-
 fs/cifs/cifsfs.c                                   |   2 +-
 fs/cifs/cifsglob.h                                 |   6 +-
 fs/cifs/cifsproto.h                                |   8 +
 fs/cifs/connect.c                                  |   2 +-
 fs/cifs/dir.c                                      |   5 +-
 fs/cifs/file.c                                     |  10 +-
 fs/cifs/inode.c                                    |   8 +-
 fs/cifs/ioctl.c                                    |   2 +-
 fs/cifs/link.c                                     |  18 +-
 fs/cifs/smb1ops.c                                  |  19 +-
 fs/cifs/smb2inode.c                                |   9 +-
 fs/cifs/smb2ops.c                                  |  92 +++----
 fs/cifs/smb2proto.h                                |   2 +-
 fs/ext4/fsmap.c                                    |   2 +
 fs/ext4/inline.c                                   |   1 -
 fs/ext4/inode.c                                    |   7 +-
 fs/ext4/ioctl.c                                    |   1 +
 fs/ext4/namei.c                                    |  36 ++-
 fs/ext4/xattr.c                                    |   3 +
 fs/file.c                                          |   1 +
 include/asm-generic/vmlinux.lds.h                  |  16 +-
 include/linux/irqdomain.h                          |   2 +-
 include/linux/pci_ids.h                            |   2 +
 include/net/netfilter/nf_tproxy.h                  |   7 +
 kernel/bpf/btf.c                                   |   1 +
 kernel/irq/irqdomain.c                             |  62 +++--
 net/caif/caif_usb.c                                |   3 +
 net/ipv4/netfilter/nf_tproxy_ipv4.c                |   2 +-
 net/ipv6/ila/ila_xlat.c                            |   1 +
 net/ipv6/netfilter/nf_tproxy_ipv6.c                |   2 +-
 net/nfc/netlink.c                                  |   2 +-
 net/smc/af_smc.c                                   |  13 +-
 tools/testing/selftests/netfilter/nft_nat.sh       |   2 +
 74 files changed, 783 insertions(+), 811 deletions(-)

[PATCH 5.4 01/68] fs: prevent out-of-bounds array speculation when closing a file descriptor

[Greg Kroah-Hartman]

From: Theodore Ts'o <tytso@mit.edu>

commit 609d54441493c99f21c1823dfd66fa7f4c512ff4 upstream.

Google-Bug-Id: 114199369
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/file.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/file.c
+++ b/fs/file.c
@@ -654,6 +654,7 @@ int __close_fd_get_file(unsigned int fd,
 	fdt = files_fdtable(files);
 	if (fd >= fdt->max_fds)
 		goto out_unlock;
+	fd = array_index_nospec(fd, fdt->max_fds);
 	file = fdt->fd[fd];
 	if (!file)
 		goto out_unlock;

[PATCH 5.4 02/68] x86/CPU/AMD: Disable XSAVES on AMD family 0x17

[Greg Kroah-Hartman]

From: Andrew Cooper <andrew.cooper3@citrix.com>

commit b0563468eeac88ebc70559d52a0b66efc37e4e9d upstream.

AMD Erratum 1386 is summarised as:

  XSAVES Instruction May Fail to Save XMM Registers to the Provided
  State Save Area

This piece of accidental chronomancy causes the %xmm registers to
occasionally reset back to an older value.

Ignore the XSAVES feature on all AMD Zen1/2 hardware.  The XSAVEC
instruction (which works fine) is equivalent on affected parts.

  [ bp: Typos, move it into the F17h-specific function. ]

Reported-by: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/amd.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -205,6 +205,15 @@ static void init_amd_k6(struct cpuinfo_x
 		return;
 	}
 #endif
+	/*
+	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
+	 * certain circumstances on Zen1/2 uarch, and not all parts have had
+	 * updated microcode at the time of writing (March 2023).
+	 *
+	 * Affected parts all have no supervisor XSAVE states, meaning that
+	 * the XSAVEC instruction (which works fine) is equivalent.
+	 */
+	clear_cpu_cap(c, X86_FEATURE_XSAVES);
 }
 
 static void init_amd_k7(struct cpuinfo_x86 *c)

[PATCH 5.4 03/68] drm/connector: print max_requested_bpc in state debugfs

[Greg Kroah-Hartman]

From: Harry Wentland <harry.wentland@amd.com>

commit 7d386975f6a495902e679a3a250a7456d7e54765 upstream.

This is useful to understand the bpc defaults and
support of a driver.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_atomic.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1006,6 +1006,7 @@ static void drm_atomic_connector_print_s
 	drm_printf(p, "connector[%u]: %s\n", connector->base.id, connector->name);
 	drm_printf(p, "\tcrtc=%s\n", state->crtc ? state->crtc->name : "(null)");
 	drm_printf(p, "\tself_refresh_aware=%d\n", state->self_refresh_aware);
+	drm_printf(p, "\tmax_requested_bpc=%d\n", state->max_requested_bpc);
 
 	if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
 		if (state->writeback_job && state->writeback_job->fb)

[PATCH 5.4 04/68] ext4: fix RENAME_WHITEOUT handling for inline directories

[Greg Kroah-Hartman]

From: Eric Whitney <enwlinux@gmail.com>

commit c9f62c8b2dbf7240536c0cc9a4529397bb8bf38e upstream.

A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled.  An example:

"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
 #16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."

The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.

In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline.  It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it.  This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.

Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed.  Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above.  Go one step further
and do the same in the code that resets the source directory entry in
the event of failure.  The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.

Fixes: b7ff91fd030d ("ext4: find old entry again if failed to rename whiteout")
Cc: stable@kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/namei.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1502,11 +1502,10 @@ static struct buffer_head *__ext4_find_e
 		int has_inline_data = 1;
 		ret = ext4_find_inline_entry(dir, fname, res_dir,
 					     &has_inline_data);
-		if (has_inline_data) {
-			if (inlined)
-				*inlined = 1;
+		if (inlined)
+			*inlined = has_inline_data;
+		if (has_inline_data)
 			goto cleanup_and_exit;
-		}
 	}
 
 	if ((namelen <= 2) && (name[0] == '.') &&
@@ -3630,7 +3629,8 @@ static void ext4_resetent(handle_t *hand
 	 * so the old->de may no longer valid and need to find it again
 	 * before reset old inode info.
 	 */
-	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de, NULL);
+	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de,
+				 &old.inlined);
 	if (IS_ERR(old.bh))
 		retval = PTR_ERR(old.bh);
 	if (!old.bh)
@@ -3795,7 +3795,8 @@ static int ext4_rename(struct inode *old
 			return retval;
 	}
 
-	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de, NULL);
+	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de,
+				 &old.inlined);
 	if (IS_ERR(old.bh))
 		return PTR_ERR(old.bh);
 	/*

[PATCH 5.4 05/68] ext4: fix another off-by-one fsmap error on 1k block filesystems

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

commit c993799baf9c5861f8df91beb80e1611b12efcbd upstream.

Apparently syzbot figured out that issuing this FSMAP call:

struct fsmap_head cmd = {
	.fmh_count	= ...;
	.fmh_keys	= {
		{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
		{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
	},
...
};
ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd);

Produces this crash if the underlying filesystem is a 1k-block ext4
filesystem:

kernel BUG at fs/ext4/ext4.h:3331!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G        W  O       6.2.0-rc8-achx
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4]
RSP: 0018:ffffc90007c03998 EFLAGS: 00010246
RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000
RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11
RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400
R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398
FS:  00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0
Call Trace:
 <TASK>
 ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 __ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 __x64_sys_ioctl+0x82/0xa0
 do_syscall_64+0x2b/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf20558aff
RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff
RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003
RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010
R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000

For GETFSMAP calls, the caller selects a physical block device by
writing its block number into fsmap_head.fmh_keys[01].fmr_device.
To query mappings for a subrange of the device, the starting byte of the
range is written to fsmap_head.fmh_keys[0].fmr_physical and the last
byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.

IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd
set the inputs as follows:

	fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3},
	fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14},

Which would return you whatever is mapped in the 12 bytes starting at
physical offset 3.

The crash is due to insufficient range validation of keys[1] in
ext4_getfsmap_datadev.  On 1k-block filesystems, block 0 is not part of
the filesystem, which means that s_first_data_block is nonzero.
ext4_get_group_no_and_offset subtracts this quantity from the blocknr
argument before cracking it into a group number and a block number
within a group.  IOWs, block group 0 spans blocks 1-8192 (1-based)
instead of 0-8191 (0-based) like what happens with larger blocksizes.

The net result of this encoding is that blocknr < s_first_data_block is
not a valid input to this function.  The end_fsb variable is set from
the keys that are copied from userspace, which means that in the above
example, its value is zero.  That leads to an underflow here:

	blocknr = blocknr - le32_to_cpu(es->s_first_data_block);

The division then operates on -1:

	offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
		EXT4_SB(sb)->s_cluster_bits;

Leaving an impossibly large group number (2^32-1) in blocknr.
ext4_getfsmap_check_keys checked that keys[0].fmr_physical and
keys[1].fmr_physical are in increasing order, but
ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least
s_first_data_block.  This implies that we have to check it again after
the adjustment, which is the piece that I forgot.

Reported-by: syzbot+6be2b977c89f79b6b153@syzkaller.appspotmail.com
Fixes: 4a4956249dac ("ext4: fix off-by-one fsmap error on 1k block filesystems")
Link: https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002
Cc: stable@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/fsmap.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/ext4/fsmap.c
+++ b/fs/ext4/fsmap.c
@@ -486,6 +486,8 @@ static int ext4_getfsmap_datadev(struct
 		keys[0].fmr_physical = bofs;
 	if (keys[1].fmr_physical >= eofs)
 		keys[1].fmr_physical = eofs - 1;
+	if (keys[1].fmr_physical < keys[0].fmr_physical)
+		return 0;
 	start_fsb = keys[0].fmr_physical;
 	end_fsb = keys[1].fmr_physical;
 

[PATCH 5.4 06/68] ext4: move where set the MAY_INLINE_DATA flag is set

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

commit 1dcdce5919115a471bf4921a57f20050c545a236 upstream.

The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode().  In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/inline.c |    1 -
 fs/ext4/inode.c  |    7 ++++++-
 2 files changed, 6 insertions(+), 2 deletions(-)

--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -157,7 +157,6 @@ int ext4_find_inline_data_nolock(struct
 					(void *)ext4_raw_inode(&is.iloc));
 		EXT4_I(inode)->i_inline_size = EXT4_MIN_INLINE_DATA_SIZE +
 				le32_to_cpu(is.s.here->e_value_size);
-		ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 	}
 out:
 	brelse(is.iloc.bh);
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4862,8 +4862,13 @@ static inline int ext4_iget_extra_inode(
 
 	if (EXT4_INODE_HAS_XATTR_SPACE(inode)  &&
 	    *magic == cpu_to_le32(EXT4_XATTR_MAGIC)) {
+		int err;
+
 		ext4_set_inode_state(inode, EXT4_STATE_XATTR);
-		return ext4_find_inline_data_nolock(inode);
+		err = ext4_find_inline_data_nolock(inode);
+		if (!err && ext4_has_inline_data(inode))
+			ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
+		return err;
 	} else
 		EXT4_I(inode)->i_inline_off = 0;
 	return 0;

[PATCH 5.4 07/68] ext4: fix WARNING in ext4_update_inline_data

[Greg Kroah-Hartman]

From: Ye Bin <yebin10@huawei.com>

commit 2b96b4a5d9443ca4cad58b0040be455803c05a42 upstream.

Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246
RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000
RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248
RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220
R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40
R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c
FS:  0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __alloc_pages_node include/linux/gfp.h:237 [inline]
 alloc_pages_node include/linux/gfp.h:260 [inline]
 __kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
 __do_kmalloc_node mm/slab_common.c:956 [inline]
 __kmalloc+0xfe/0x190 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 kzalloc include/linux/slab.h:720 [inline]
 ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
 ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
 ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
 ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
 ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
 ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
 lookup_open fs/namei.c:3413 [inline]
 open_last_lookups fs/namei.c:3481 [inline]
 path_openat+0x12ac/0x2dd0 fs/namei.c:3711
 do_filp_open+0x264/0x4f0 fs/namei.c:3741
 do_sys_openat2+0x124/0x4e0 fs/open.c:1310
 do_sys_open fs/open.c:1326 [inline]
 __do_sys_openat fs/open.c:1342 [inline]
 __se_sys_openat fs/open.c:1337 [inline]
 __x64_sys_openat+0x243/0x290 fs/open.c:1337
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Above issue happens as follows:
ext4_iget
   ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
   __ext4_mark_inode_dirty
      ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
         ext4_xattr_shift_entries
	 ->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
  ext4_update_inline_dir
    get_max_inline_xattr_value_size
      if (EXT4_I(inode)->i_inline_off)
	entry = (struct ext4_xattr_entry *)((void *)raw_inode +
			EXT4_I(inode)->i_inline_off);
        free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
	->As entry is incorrect, then 'free' may be negative
   ext4_update_inline_data
      value = kzalloc(len, GFP_NOFS);
      -> len is unsigned int, maybe very large, then trigger warning when
         'kzalloc()'

To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'.  We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed.  Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().

Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/xattr.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -2819,6 +2819,9 @@ shift:
 			(void *)header, total_ino);
 	EXT4_I(inode)->i_extra_isize = new_extra_isize;
 
+	if (ext4_has_inline_data(inode))
+		error = ext4_find_inline_data_nolock(inode);
+
 cleanup:
 	if (error && (mnt_count != le16_to_cpu(sbi->s_es->s_mnt_count))) {
 		ext4_warning(inode->i_sb, "Unable to expand inode %lu. Delete some EAs or run e2fsck.",

[PATCH 5.4 08/68] ext4: zero i_disksize when initializing the bootloader inode

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

commit f5361da1e60d54ec81346aee8e3d8baf1be0b762 upstream.

If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0.  However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:

 WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
 RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
 Call Trace:
  vfs_write+0x3b1/0x5c0
  ksys_write+0x77/0x160
  __x64_sys_write+0x22/0x30
  do_syscall_64+0x39/0x80

Reproducer:
 1. create corrupted image and mount it:
       mke2fs -t ext4 /tmp/foo.img 200
       debugfs -wR "sif <5> size 25700" /tmp/foo.img
       mount -t ext4 /tmp/foo.img /mnt
       cd /mnt
       echo 123 > file
 2. Run the reproducer program:
       posix_memalign(&buf, 1024, 1024)
       fd = open("file", O_RDWR | O_DIRECT);
       ioctl(fd, EXT4_IOC_SWAP_BOOT);
       write(fd, buf, 1024);

Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/ioctl.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -179,6 +179,7 @@ static long swap_inode_boot_loader(struc
 		ei_bl->i_flags = 0;
 		inode_set_iversion(inode_bl, 1);
 		i_size_write(inode_bl, 0);
+		EXT4_I(inode_bl)->i_disksize = inode_bl->i_size;
 		inode_bl->i_mode = S_IFREG;
 		if (ext4_has_feature_extents(sb)) {
 			ext4_set_inode_flag(inode_bl, EXT4_INODE_EXTENTS);

[PATCH 5.4 09/68] nfc: change order inside nfc_se_io error path

[Greg Kroah-Hartman]

From: Fedor Pchelkin <pchelkin@ispras.ru>

commit 7d834b4d1ab66c48e8c0810fdeadaabb80fa2c81 upstream.

cb_context should be freed on the error path in nfc_se_io as stated by
commit 25ff6f8a5a3b ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").

Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1454,8 +1454,8 @@ static int nfc_se_io(struct nfc_dev *dev
 	return rc;
 
 error:
-	kfree(cb_context);
 	device_unlock(&dev->dev);
+	kfree(cb_context);
 	return rc;
 }
 

[PATCH 5.4 10/68] drm/edid: Extract drm_mode_cea_vic()

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit cfd6f8c3a94a96c003a8929b66d6d54181b9420d ]

Extract the logic to compute the final CEA VIC to a small helper.
We'll reorder it a bit to make future modifications more
straightforward. No function changes.

Cc: Wayne Lin <waynelin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Stable-dep-of: 1cbc1f0d324b ("drm/edid: fix AVI infoframe aspect ratio handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 53 +++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 2dc6dd6230d76..10eb78b9347e1 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5065,6 +5065,35 @@ drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame,
 }
 EXPORT_SYMBOL(drm_hdmi_infoframe_set_hdr_metadata);
 
+static u8 drm_mode_cea_vic(struct drm_connector *connector,
+			   const struct drm_display_mode *mode)
+{
+	u8 vendor_if_vic = drm_match_hdmi_mode(mode);
+	bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
+	u8 vic;
+
+	/*
+	 * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
+	 * we should send its VIC in vendor infoframes, else send the
+	 * VIC in AVI infoframes. Lets check if this mode is present in
+	 * HDMI 1.4b 4K modes
+	 */
+	if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
+		return 0;
+
+	vic = drm_match_cea_mode(mode);
+
+	/*
+	 * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
+	 * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
+	 * have to make sure we dont break HDMI 1.4 sinks.
+	 */
+	if (!is_hdmi2_sink(connector) && vic > 64)
+		return 0;
+
+	return vic;
+}
+
 /**
  * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
  *                                              data from a DRM display mode
@@ -5092,29 +5121,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		frame->pixel_repeat = 1;
 
-	frame->video_code = drm_match_cea_mode(mode);
-
-	/*
-	 * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
-	 * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
-	 * have to make sure we dont break HDMI 1.4 sinks.
-	 */
-	if (!is_hdmi2_sink(connector) && frame->video_code > 64)
-		frame->video_code = 0;
-
-	/*
-	 * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
-	 * we should send its VIC in vendor infoframes, else send the
-	 * VIC in AVI infoframes. Lets check if this mode is present in
-	 * HDMI 1.4b 4K modes
-	 */
-	if (frame->video_code) {
-		u8 vendor_if_vic = drm_match_hdmi_mode(mode);
-		bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
-
-		if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
-			frame->video_code = 0;
-	}
+	frame->video_code = drm_mode_cea_vic(connector, mode);
 
 	frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
 
-- 
2.39.2

[PATCH 5.4 11/68] drm/edid: Fix HDMI VIC handling

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 949561eb85bcee10248e7da51d44a0325d5e0d1b ]

Extract drm_mode_hdmi_vic() to correctly calculate the final HDMI
VIC for us. Currently this is being done a bit differently between
the AVI and HDMI infoframes. Let's get both to agree on this.

We need to allow the case where a mode is both 3D and has a HDMI
VIC. Currently we'll just refuse to generate the HDMI infoframe when
we really should be setting HDMI VIC to 0 and instead enabling 3D
stereo signalling.

If the sink doesn't even support the HDMI infoframe we should
not be picking the HDMI VIC in favor of the CEA VIC, because then
we'll end up not sending either VIC in the end.

Cc: Wayne Lin <waynelin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Stable-dep-of: 1cbc1f0d324b ("drm/edid: fix AVI infoframe aspect ratio handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 10eb78b9347e1..245e495f57c93 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5065,11 +5065,25 @@ drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame,
 }
 EXPORT_SYMBOL(drm_hdmi_infoframe_set_hdr_metadata);
 
+static u8 drm_mode_hdmi_vic(struct drm_connector *connector,
+			    const struct drm_display_mode *mode)
+{
+	bool has_hdmi_infoframe = connector ?
+		connector->display_info.has_hdmi_infoframe : false;
+
+	if (!has_hdmi_infoframe)
+		return 0;
+
+	/* No HDMI VIC when signalling 3D video format */
+	if (mode->flags & DRM_MODE_FLAG_3D_MASK)
+		return 0;
+
+	return drm_match_hdmi_mode(mode);
+}
+
 static u8 drm_mode_cea_vic(struct drm_connector *connector,
 			   const struct drm_display_mode *mode)
 {
-	u8 vendor_if_vic = drm_match_hdmi_mode(mode);
-	bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
 	u8 vic;
 
 	/*
@@ -5078,7 +5092,7 @@ static u8 drm_mode_cea_vic(struct drm_connector *connector,
 	 * VIC in AVI infoframes. Lets check if this mode is present in
 	 * HDMI 1.4b 4K modes
 	 */
-	if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
+	if (drm_mode_hdmi_vic(connector, mode))
 		return 0;
 
 	vic = drm_match_cea_mode(mode);
@@ -5338,8 +5352,6 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 	bool has_hdmi_infoframe = connector ?
 		connector->display_info.has_hdmi_infoframe : false;
 	int err;
-	u32 s3d_flags;
-	u8 vic;
 
 	if (!frame || !mode)
 		return -EINVAL;
@@ -5347,8 +5359,9 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 	if (!has_hdmi_infoframe)
 		return -EINVAL;
 
-	vic = drm_match_hdmi_mode(mode);
-	s3d_flags = mode->flags & DRM_MODE_FLAG_3D_MASK;
+	err = hdmi_vendor_infoframe_init(frame);
+	if (err < 0)
+		return err;
 
 	/*
 	 * Even if it's not absolutely necessary to send the infoframe
@@ -5359,15 +5372,7 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 	 * mode if the source simply stops sending the infoframe when
 	 * it wants to switch from 3D to 2D.
 	 */
-
-	if (vic && s3d_flags)
-		return -EINVAL;
-
-	err = hdmi_vendor_infoframe_init(frame);
-	if (err < 0)
-		return err;
-
-	frame->vic = vic;
+	frame->vic = drm_mode_hdmi_vic(connector, mode);
 	frame->s3d_struct = s3d_structure_from_display_mode(mode);
 
 	return 0;
-- 
2.39.2

[PATCH 5.4 12/68] drm/edid: Add aspect ratios to HDMI 4K modes

[Greg Kroah-Hartman]

From: Wayne Lin <Wayne.Lin@amd.com>

[ Upstream commit d2b434730f301a7ad74473eb66422f0008186306 ]

[Why]
HDMI 2.0 adds aspect ratio attribute to distinguish different
4k modes. According to Appendix E of HDMI 2.0 spec, source should
use VSIF to indicate video mode only when the mode is one defined
in HDMI 1.4b 4K modes. Otherwise, use AVI infoframes to convey VIC.

Current code doesn't take aspect ratio into consideration while
constructing avi infoframe. Should modify that.

[How]
Inherit Ville Syrjälä's work
"drm/edid: Prep for HDMI VIC aspect ratio" at
https://patchwork.kernel.org/patch/11174639/

Add picture_aspect_ratio attributes to edid_4k_modes[] and
construct VIC and HDMI_VIC by taking aspect ratio into
consideration.

v2: Correct missing initializer error at adding aspect ratio of
SMPTE mode.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118101832.15487-1-Wayne.Lin@amd.com
Stable-dep-of: 1cbc1f0d324b ("drm/edid: fix AVI infoframe aspect ratio handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 45 +++++++++++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 245e495f57c93..f9735861741c1 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1292,25 +1292,25 @@ static const struct drm_display_mode edid_4k_modes[] = {
 		   3840, 4016, 4104, 4400, 0,
 		   2160, 2168, 2178, 2250, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
-	  .vrefresh = 30, },
+	  .vrefresh = 30, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
 	/* 2 - 3840x2160@25Hz */
 	{ DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000,
 		   3840, 4896, 4984, 5280, 0,
 		   2160, 2168, 2178, 2250, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
-	  .vrefresh = 25, },
+	  .vrefresh = 25, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
 	/* 3 - 3840x2160@24Hz */
 	{ DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 297000,
 		   3840, 5116, 5204, 5500, 0,
 		   2160, 2168, 2178, 2250, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
-	  .vrefresh = 24, },
+	  .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
 	/* 4 - 4096x2160@24Hz (SMPTE) */
 	{ DRM_MODE("4096x2160", DRM_MODE_TYPE_DRIVER, 297000,
 		   4096, 5116, 5204, 5500, 0,
 		   2160, 2168, 2178, 2250, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC),
-	  .vrefresh = 24, },
+	  .vrefresh = 24, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_256_135, },
 };
 
 /*** DDC fetch and block validation ***/
@@ -3122,6 +3122,11 @@ enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
 }
 EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
 
+static enum hdmi_picture_aspect drm_get_hdmi_aspect_ratio(const u8 video_code)
+{
+	return edid_4k_modes[video_code].picture_aspect_ratio;
+}
+
 /*
  * Calculate the alternate clock for HDMI modes (those from the HDMI vendor
  * specific block).
@@ -3148,6 +3153,9 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_
 	if (!to_match->clock)
 		return 0;
 
+	if (to_match->picture_aspect_ratio)
+		match_flags |= DRM_MODE_MATCH_ASPECT_RATIO;
+
 	for (vic = 1; vic < ARRAY_SIZE(edid_4k_modes); vic++) {
 		const struct drm_display_mode *hdmi_mode = &edid_4k_modes[vic];
 		unsigned int clock1, clock2;
@@ -3183,6 +3191,9 @@ static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)
 	if (!to_match->clock)
 		return 0;
 
+	if (to_match->picture_aspect_ratio)
+		match_flags |= DRM_MODE_MATCH_ASPECT_RATIO;
+
 	for (vic = 1; vic < ARRAY_SIZE(edid_4k_modes); vic++) {
 		const struct drm_display_mode *hdmi_mode = &edid_4k_modes[vic];
 		unsigned int clock1, clock2;
@@ -5123,6 +5134,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 					 const struct drm_display_mode *mode)
 {
 	enum hdmi_picture_aspect picture_aspect;
+	u8 vic, hdmi_vic;
 	int err;
 
 	if (!frame || !mode)
@@ -5135,7 +5147,8 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		frame->pixel_repeat = 1;
 
-	frame->video_code = drm_mode_cea_vic(connector, mode);
+	vic = drm_mode_cea_vic(connector, mode);
+	hdmi_vic = drm_mode_hdmi_vic(connector, mode);
 
 	frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
 
@@ -5149,11 +5162,15 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 
 	/*
 	 * Populate picture aspect ratio from either
-	 * user input (if specified) or from the CEA mode list.
+	 * user input (if specified) or from the CEA/HDMI mode lists.
 	 */
 	picture_aspect = mode->picture_aspect_ratio;
-	if (picture_aspect == HDMI_PICTURE_ASPECT_NONE)
-		picture_aspect = drm_get_cea_aspect_ratio(frame->video_code);
+	if (picture_aspect == HDMI_PICTURE_ASPECT_NONE) {
+		if (vic)
+			picture_aspect = drm_get_cea_aspect_ratio(vic);
+		else if (hdmi_vic)
+			picture_aspect = drm_get_hdmi_aspect_ratio(hdmi_vic);
+	}
 
 	/*
 	 * The infoframe can't convey anything but none, 4:3
@@ -5161,12 +5178,20 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 	 * we can only satisfy it by specifying the right VIC.
 	 */
 	if (picture_aspect > HDMI_PICTURE_ASPECT_16_9) {
-		if (picture_aspect !=
-		    drm_get_cea_aspect_ratio(frame->video_code))
+		if (vic) {
+			if (picture_aspect != drm_get_cea_aspect_ratio(vic))
+				return -EINVAL;
+		} else if (hdmi_vic) {
+			if (picture_aspect != drm_get_hdmi_aspect_ratio(hdmi_vic))
+				return -EINVAL;
+		} else {
 			return -EINVAL;
+		}
+
 		picture_aspect = HDMI_PICTURE_ASPECT_NONE;
 	}
 
+	frame->video_code = vic;
 	frame->picture_aspect = picture_aspect;
 	frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
 	frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
-- 
2.39.2

[PATCH 5.4 13/68] drm/edid: fix AVI infoframe aspect ratio handling

[Greg Kroah-Hartman]

From: Jani Nikula <jani.nikula@intel.com>

[ Upstream commit 1cbc1f0d324ba6c4d1b10ac6362b5e0b029f63d5 ]

We try to avoid sending VICs defined in the later specs in AVI
infoframes to sinks that conform to the earlier specs, to not upset
them, and use 0 for the VIC instead. However, we do this detection and
conversion to 0 too early, as we'll need the actual VIC to figure out
the aspect ratio.

In particular, for a mode with 64:27 aspect ratio, 0 for VIC fails the
AVI infoframe generation altogether with -EINVAL.

Separate the VIC lookup from the "filtering", and postpone the
filtering, to use the proper VIC for aspect ratio handling, and the 0
VIC for the infoframe video code as needed.

Reported-by: William Tseng <william.tseng@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6153
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3e78cc6d01ed237f71ad0038826b08d83d75eef.1672826282.git.jani.nikula@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f9735861741c1..2e73042e5d070 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -5095,8 +5095,6 @@ static u8 drm_mode_hdmi_vic(struct drm_connector *connector,
 static u8 drm_mode_cea_vic(struct drm_connector *connector,
 			   const struct drm_display_mode *mode)
 {
-	u8 vic;
-
 	/*
 	 * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
 	 * we should send its VIC in vendor infoframes, else send the
@@ -5106,13 +5104,18 @@ static u8 drm_mode_cea_vic(struct drm_connector *connector,
 	if (drm_mode_hdmi_vic(connector, mode))
 		return 0;
 
-	vic = drm_match_cea_mode(mode);
+	return drm_match_cea_mode(mode);
+}
 
-	/*
-	 * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
-	 * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
-	 * have to make sure we dont break HDMI 1.4 sinks.
-	 */
+/*
+ * Avoid sending VICs defined in HDMI 2.0 in AVI infoframes to sinks that
+ * conform to HDMI 1.4.
+ *
+ * HDMI 1.4 (CTA-861-D) VIC range: [1..64]
+ * HDMI 2.0 (CTA-861-F) VIC range: [1..107]
+ */
+static u8 vic_for_avi_infoframe(const struct drm_connector *connector, u8 vic)
+{
 	if (!is_hdmi2_sink(connector) && vic > 64)
 		return 0;
 
@@ -5191,7 +5194,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 		picture_aspect = HDMI_PICTURE_ASPECT_NONE;
 	}
 
-	frame->video_code = vic;
+	frame->video_code = vic_for_avi_infoframe(connector, vic);
 	frame->picture_aspect = picture_aspect;
 	frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
 	frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
-- 
2.39.2

[PATCH 5.4 14/68] iommu/amd: Add PCI segment support for ivrs_[ioapic/hpet/acpihid] commands

[Greg Kroah-Hartman]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

[ Upstream commit bbe3a106580c21bc883fb0c9fa3da01534392fe8 ]

By default, PCI segment is zero and can be omitted. To support system
with non-zero PCI segment ID, modify the parsing functions to allow
PCI segment ID.

Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-33-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         | 34 ++++++++++----
 drivers/iommu/amd_iommu_init.c                | 44 ++++++++++++-------
 2 files changed, 52 insertions(+), 26 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 8f71a17ad5442..9164263839216 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1944,23 +1944,39 @@
 
 	ivrs_ioapic	[HW,X86_64]
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map IOAPIC-ID decimal 10 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+			For example:
+			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
+			* To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_hpet	[HW,X86_64]
 			Provide an override to the HPET-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map HPET-ID decimal 0 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+			For example:
+			* To map HPET-ID decimal 0 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
+			* To map HPET-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_acpihid	[HW,X86_64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map UART-HID:UID AMD0020:0 to
-			PCI device 00:14.5 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+
+			For example, to map UART-HID:UID AMD0020:0 to
+			PCI segment 0x1 and PCI device ID 00:14.5,
+			write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
+
+			By default, PCI segment is 0, and can be omitted.
+			For example, PCI device 00:14.5 write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 533b920ed7df2..f4e6173e749a4 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -84,6 +84,10 @@
 #define ACPI_DEVFLAG_ATSDIS             0x10000000
 
 #define LOOP_TIMEOUT	2000000
+
+#define IVRS_GET_SBDF_ID(seg, bus, dev, fd)	(((seg & 0xffff) << 16) | ((bus & 0xff) << 8) \
+						 | ((dev & 0x1f) << 3) | (fn & 0x7))
+
 /*
  * ACPI table definitions
  *
@@ -2971,15 +2975,17 @@ static int __init parse_amd_iommu_options(char *str)
 
 static int __init parse_ivrs_ioapic(char *str)
 {
-	unsigned int bus, dev, fn;
+	u32 seg = 0, bus, dev, fn;
 	int ret, id, i;
-	u16 devid;
+	u32 devid;
 
 	ret = sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn);
-
 	if (ret != 4) {
-		pr_err("Invalid command line: ivrs_ioapic%s\n", str);
-		return 1;
+		ret = sscanf(str, "[%d]=%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn);
+		if (ret != 5) {
+			pr_err("Invalid command line: ivrs_ioapic%s\n", str);
+			return 1;
+		}
 	}
 
 	if (early_ioapic_map_size == EARLY_MAP_SIZE) {
@@ -2988,7 +2994,7 @@ static int __init parse_ivrs_ioapic(char *str)
 		return 1;
 	}
 
-	devid = ((bus & 0xff) << 8) | ((dev & 0x1f) << 3) | (fn & 0x7);
+	devid = IVRS_GET_SBDF_ID(seg, bus, dev, fn);
 
 	cmdline_maps			= true;
 	i				= early_ioapic_map_size++;
@@ -3001,15 +3007,17 @@ static int __init parse_ivrs_ioapic(char *str)
 
 static int __init parse_ivrs_hpet(char *str)
 {
-	unsigned int bus, dev, fn;
+	u32 seg = 0, bus, dev, fn;
 	int ret, id, i;
-	u16 devid;
+	u32 devid;
 
 	ret = sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn);
-
 	if (ret != 4) {
-		pr_err("Invalid command line: ivrs_hpet%s\n", str);
-		return 1;
+		ret = sscanf(str, "[%d]=%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn);
+		if (ret != 5) {
+			pr_err("Invalid command line: ivrs_hpet%s\n", str);
+			return 1;
+		}
 	}
 
 	if (early_hpet_map_size == EARLY_MAP_SIZE) {
@@ -3018,7 +3026,7 @@ static int __init parse_ivrs_hpet(char *str)
 		return 1;
 	}
 
-	devid = ((bus & 0xff) << 8) | ((dev & 0x1f) << 3) | (fn & 0x7);
+	devid = IVRS_GET_SBDF_ID(seg, bus, dev, fn);
 
 	cmdline_maps			= true;
 	i				= early_hpet_map_size++;
@@ -3031,15 +3039,18 @@ static int __init parse_ivrs_hpet(char *str)
 
 static int __init parse_ivrs_acpihid(char *str)
 {
-	u32 bus, dev, fn;
+	u32 seg = 0, bus, dev, fn;
 	char *hid, *uid, *p;
 	char acpiid[ACPIHID_UID_LEN + ACPIHID_HID_LEN] = {0};
 	int ret, i;
 
 	ret = sscanf(str, "[%x:%x.%x]=%s", &bus, &dev, &fn, acpiid);
 	if (ret != 4) {
-		pr_err("Invalid command line: ivrs_acpihid(%s)\n", str);
-		return 1;
+		ret = sscanf(str, "[%x:%x:%x.%x]=%s", &seg, &bus, &dev, &fn, acpiid);
+		if (ret != 5) {
+			pr_err("Invalid command line: ivrs_acpihid(%s)\n", str);
+			return 1;
+		}
 	}
 
 	p = acpiid;
@@ -3061,8 +3072,7 @@ static int __init parse_ivrs_acpihid(char *str)
 	i = early_acpihid_map_size++;
 	memcpy(early_acpihid_map[i].hid, hid, strlen(hid));
 	memcpy(early_acpihid_map[i].uid, uid, strlen(uid));
-	early_acpihid_map[i].devid =
-		((bus & 0xff) << 8) | ((dev & 0x1f) << 3) | (fn & 0x7);
+	early_acpihid_map[i].devid = IVRS_GET_SBDF_ID(seg, bus, dev, fn);
 	early_acpihid_map[i].cmd_line	= true;
 
 	return 1;
-- 
2.39.2

[PATCH 5.4 15/68] iommu/amd: Fix ill-formed ivrs_ioapic, ivrs_hpet and ivrs_acpihid options

[Greg Kroah-Hartman]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit 1198d2316dc4265a97d0e8445a22c7a6d17580a4 ]

Currently, these options cause the following libkmod error:

libkmod: ERROR ../libkmod/libkmod-config.c:489 kcmdline_parse_result: \
	Ignoring bad option on kernel command line while parsing module \
	name: 'ivrs_xxxx[XX:XX'

Fix by introducing a new parameter format for these options and
throw a warning for the deprecated format.

Users are still allowed to omit the PCI Segment if zero.

Adding a Link: to the reason why we're modding the syntax parsing
in the driver and not in libkmod.

Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-modules/20200310082308.14318-2-lucas.demarchi@intel.com/
Reported-by: Kim Phillips <kim.phillips@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20220919155638.391481-2-kim.phillips@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         | 27 +++++--
 drivers/iommu/amd_iommu_init.c                | 79 +++++++++++++------
 2 files changed, 76 insertions(+), 30 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9164263839216..5e5704faae24a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1946,7 +1946,13 @@
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
@@ -1958,7 +1964,13 @@
 			Provide an override to the HPET-ID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
 			By default, PCI segment is 0, and can be omitted.
-			For example:
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
 			* To map HPET-ID decimal 0 to PCI device 00:14.0
 			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
@@ -1969,15 +1981,20 @@
 	ivrs_acpihid	[HW,X86_64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
 			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
 
 			For example, to map UART-HID:UID AMD0020:0 to
 			PCI segment 0x1 and PCI device ID 00:14.5,
 			write the parameter as:
-				ivrs_acpihid[0001:00:14.5]=AMD0020:0
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
 
-			By default, PCI segment is 0, and can be omitted.
-			For example, PCI device 00:14.5 write the parameter as:
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index f4e6173e749a4..71e4a8eac3c92 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -2976,18 +2976,24 @@ static int __init parse_amd_iommu_options(char *str)
 static int __init parse_ivrs_ioapic(char *str)
 {
 	u32 seg = 0, bus, dev, fn;
-	int ret, id, i;
+	int id, i;
 	u32 devid;
 
-	ret = sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn);
-	if (ret != 4) {
-		ret = sscanf(str, "[%d]=%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn);
-		if (ret != 5) {
-			pr_err("Invalid command line: ivrs_ioapic%s\n", str);
-			return 1;
-		}
+	if (sscanf(str, "=%d@%x:%x.%x", &id, &bus, &dev, &fn) == 4 ||
+	    sscanf(str, "=%d@%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn) == 5)
+		goto found;
+
+	if (sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn) == 4 ||
+	    sscanf(str, "[%d]=%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn) == 5) {
+		pr_warn("ivrs_ioapic%s option format deprecated; use ivrs_ioapic=%d@%04x:%02x:%02x.%d instead\n",
+			str, id, seg, bus, dev, fn);
+		goto found;
 	}
 
+	pr_err("Invalid command line: ivrs_ioapic%s\n", str);
+	return 1;
+
+found:
 	if (early_ioapic_map_size == EARLY_MAP_SIZE) {
 		pr_err("Early IOAPIC map overflow - ignoring ivrs_ioapic%s\n",
 			str);
@@ -3008,18 +3014,24 @@ static int __init parse_ivrs_ioapic(char *str)
 static int __init parse_ivrs_hpet(char *str)
 {
 	u32 seg = 0, bus, dev, fn;
-	int ret, id, i;
+	int id, i;
 	u32 devid;
 
-	ret = sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn);
-	if (ret != 4) {
-		ret = sscanf(str, "[%d]=%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn);
-		if (ret != 5) {
-			pr_err("Invalid command line: ivrs_hpet%s\n", str);
-			return 1;
-		}
+	if (sscanf(str, "=%d@%x:%x.%x", &id, &bus, &dev, &fn) == 4 ||
+	    sscanf(str, "=%d@%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn) == 5)
+		goto found;
+
+	if (sscanf(str, "[%d]=%x:%x.%x", &id, &bus, &dev, &fn) == 4 ||
+	    sscanf(str, "[%d]=%x:%x:%x.%x", &id, &seg, &bus, &dev, &fn) == 5) {
+		pr_warn("ivrs_hpet%s option format deprecated; use ivrs_hpet=%d@%04x:%02x:%02x.%d instead\n",
+			str, id, seg, bus, dev, fn);
+		goto found;
 	}
 
+	pr_err("Invalid command line: ivrs_hpet%s\n", str);
+	return 1;
+
+found:
 	if (early_hpet_map_size == EARLY_MAP_SIZE) {
 		pr_err("Early HPET map overflow - ignoring ivrs_hpet%s\n",
 			str);
@@ -3040,19 +3052,36 @@ static int __init parse_ivrs_hpet(char *str)
 static int __init parse_ivrs_acpihid(char *str)
 {
 	u32 seg = 0, bus, dev, fn;
-	char *hid, *uid, *p;
+	char *hid, *uid, *p, *addr;
 	char acpiid[ACPIHID_UID_LEN + ACPIHID_HID_LEN] = {0};
-	int ret, i;
-
-	ret = sscanf(str, "[%x:%x.%x]=%s", &bus, &dev, &fn, acpiid);
-	if (ret != 4) {
-		ret = sscanf(str, "[%x:%x:%x.%x]=%s", &seg, &bus, &dev, &fn, acpiid);
-		if (ret != 5) {
-			pr_err("Invalid command line: ivrs_acpihid(%s)\n", str);
-			return 1;
+	int i;
+
+	addr = strchr(str, '@');
+	if (!addr) {
+		if (sscanf(str, "[%x:%x.%x]=%s", &bus, &dev, &fn, acpiid) == 4 ||
+		    sscanf(str, "[%x:%x:%x.%x]=%s", &seg, &bus, &dev, &fn, acpiid) == 5) {
+			pr_warn("ivrs_acpihid%s option format deprecated; use ivrs_acpihid=%s@%04x:%02x:%02x.%d instead\n",
+				str, acpiid, seg, bus, dev, fn);
+			goto found;
 		}
+		goto not_found;
 	}
 
+	/* We have the '@', make it the terminator to get just the acpiid */
+	*addr++ = 0;
+
+	if (sscanf(str, "=%s", acpiid) != 1)
+		goto not_found;
+
+	if (sscanf(addr, "%x:%x.%x", &bus, &dev, &fn) == 3 ||
+	    sscanf(addr, "%x:%x:%x.%x", &seg, &bus, &dev, &fn) == 4)
+		goto found;
+
+not_found:
+	pr_err("Invalid command line: ivrs_acpihid%s\n", str);
+	return 1;
+
+found:
 	p = acpiid;
 	hid = strsep(&p, ":");
 	uid = p;
-- 
2.39.2

[PATCH 5.4 16/68] iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter

[Greg Kroah-Hartman]

From: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>

[ Upstream commit b6b26d86c61c441144c72f842f7469bb686e1211 ]

The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.

Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20230202082719.1513849-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu_init.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 71e4a8eac3c92..4a9feff340da7 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -3049,15 +3049,26 @@ static int __init parse_ivrs_hpet(char *str)
 	return 1;
 }
 
+#define ACPIID_LEN (ACPIHID_UID_LEN + ACPIHID_HID_LEN)
+
 static int __init parse_ivrs_acpihid(char *str)
 {
 	u32 seg = 0, bus, dev, fn;
 	char *hid, *uid, *p, *addr;
-	char acpiid[ACPIHID_UID_LEN + ACPIHID_HID_LEN] = {0};
+	char acpiid[ACPIID_LEN] = {0};
 	int i;
 
 	addr = strchr(str, '@');
 	if (!addr) {
+		addr = strchr(str, '=');
+		if (!addr)
+			goto not_found;
+
+		++addr;
+
+		if (strlen(addr) > ACPIID_LEN)
+			goto not_found;
+
 		if (sscanf(str, "[%x:%x.%x]=%s", &bus, &dev, &fn, acpiid) == 4 ||
 		    sscanf(str, "[%x:%x:%x.%x]=%s", &seg, &bus, &dev, &fn, acpiid) == 5) {
 			pr_warn("ivrs_acpihid%s option format deprecated; use ivrs_acpihid=%s@%04x:%02x:%02x.%d instead\n",
@@ -3070,6 +3081,9 @@ static int __init parse_ivrs_acpihid(char *str)
 	/* We have the '@', make it the terminator to get just the acpiid */
 	*addr++ = 0;
 
+	if (strlen(str) > ACPIID_LEN + 1)
+		goto not_found;
+
 	if (sscanf(str, "=%s", acpiid) != 1)
 		goto not_found;
 
-- 
2.39.2

[PATCH 5.4 17/68] ipmi:ssif: make ssif_i2c_send() void

[Greg Kroah-Hartman]

From: Liguang Zhang <zhangliguang@linux.alibaba.com>

[ Upstream commit dcd10526ac5a0d6cc94ce60b9acfca458163277b ]

This function actually needs no return value. So remove the unneeded
check and make it void.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Message-Id: <20210301140515.18951-1-zhangliguang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Stable-dep-of: 95767ed78a18 ("ipmi:ssif: resend_msg() cannot fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_ssif.c | 81 +++++++++--------------------------
 1 file changed, 20 insertions(+), 61 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index d6b69e19f78a7..5ead5e7f0ce16 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -515,7 +515,7 @@ static int ipmi_ssif_thread(void *data)
 	return 0;
 }
 
-static int ssif_i2c_send(struct ssif_info *ssif_info,
+static void ssif_i2c_send(struct ssif_info *ssif_info,
 			ssif_i2c_done handler,
 			int read_write, int command,
 			unsigned char *data, unsigned int size)
@@ -527,7 +527,6 @@ static int ssif_i2c_send(struct ssif_info *ssif_info,
 	ssif_info->i2c_data = data;
 	ssif_info->i2c_size = size;
 	complete(&ssif_info->wake_thread);
-	return 0;
 }
 
 
@@ -536,22 +535,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 
 static void start_get(struct ssif_info *ssif_info)
 {
-	int rv;
-
 	ssif_info->rtc_us_timer = 0;
 	ssif_info->multi_pos = 0;
 
-	rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
-			  SSIF_IPMI_RESPONSE,
-			  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
-	if (rv < 0) {
-		/* request failed, just return the error. */
-		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
-			dev_dbg(&ssif_info->client->dev,
-				"Error from i2c_non_blocking_op(5)\n");
-
-		msg_done_handler(ssif_info, -EIO, NULL, 0);
-	}
+	ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
+		  SSIF_IPMI_RESPONSE,
+		  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
 }
 
 static void retry_timeout(struct timer_list *t)
@@ -625,7 +614,6 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 {
 	struct ipmi_smi_msg *msg;
 	unsigned long oflags, *flags;
-	int rv;
 
 	/*
 	 * We are single-threaded here, so no need for a lock until we
@@ -671,17 +659,10 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 		ssif_info->multi_len = len;
 		ssif_info->multi_pos = 1;
 
-		rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
-				  SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
-				  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
-		if (rv < 0) {
-			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
-				dev_dbg(&ssif_info->client->dev,
-					"Error from i2c_non_blocking_op(1)\n");
-
-			result = -EIO;
-		} else
-			return;
+		ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
+			 SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
+			 ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
+		return;
 	} else if (ssif_info->multi_pos) {
 		/* Middle of multi-part read.  Start the next transaction. */
 		int i;
@@ -743,19 +724,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 
 			ssif_info->multi_pos++;
 
-			rv = ssif_i2c_send(ssif_info, msg_done_handler,
-					   I2C_SMBUS_READ,
-					   SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
-					   ssif_info->recv,
-					   I2C_SMBUS_BLOCK_DATA);
-			if (rv < 0) {
-				if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
-					dev_dbg(&ssif_info->client->dev,
-						"Error from ssif_i2c_send\n");
-
-				result = -EIO;
-			} else
-				return;
+			ssif_i2c_send(ssif_info, msg_done_handler,
+				  I2C_SMBUS_READ,
+				  SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE,
+				  ssif_info->recv,
+				  I2C_SMBUS_BLOCK_DATA);
+			return;
 		}
 	}
 
@@ -936,8 +910,6 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 static void msg_written_handler(struct ssif_info *ssif_info, int result,
 				unsigned char *data, unsigned int len)
 {
-	int rv;
-
 	/* We are single-threaded here, so no need for a lock. */
 	if (result < 0) {
 		ssif_info->retries_left--;
@@ -1000,18 +972,9 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 			ssif_info->multi_data = NULL;
 		}
 
-		rv = ssif_i2c_send(ssif_info, msg_written_handler,
-				   I2C_SMBUS_WRITE, cmd,
-				   data_to_send, I2C_SMBUS_BLOCK_DATA);
-		if (rv < 0) {
-			/* request failed, just return the error. */
-			ssif_inc_stat(ssif_info, send_errors);
-
-			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
-				dev_dbg(&ssif_info->client->dev,
-					"Error from i2c_non_blocking_op(3)\n");
-			msg_done_handler(ssif_info, -EIO, NULL, 0);
-		}
+		ssif_i2c_send(ssif_info, msg_written_handler,
+			  I2C_SMBUS_WRITE, cmd,
+			  data_to_send, I2C_SMBUS_BLOCK_DATA);
 	} else {
 		/* Ready to request the result. */
 		unsigned long oflags, *flags;
@@ -1040,7 +1003,6 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 
 static int start_resend(struct ssif_info *ssif_info)
 {
-	int rv;
 	int command;
 
 	ssif_info->got_alert = false;
@@ -1062,12 +1024,9 @@ static int start_resend(struct ssif_info *ssif_info)
 		ssif_info->data[0] = ssif_info->data_len;
 	}
 
-	rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
-			  command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
-	if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG))
-		dev_dbg(&ssif_info->client->dev,
-			"Error from i2c_non_blocking_op(4)\n");
-	return rv;
+	ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
+		   command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
+	return 0;
 }
 
 static int start_send(struct ssif_info *ssif_info,
-- 
2.39.2

[PATCH 5.4 18/68] ipmi:ssif: resend_msg() cannot fail

[Greg Kroah-Hartman]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 95767ed78a181d5404202627499f9cde56053b96 ]

The resend_msg() function cannot fail, but there was error handling
around using it.  Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_ssif.c | 28 +++++++---------------------
 1 file changed, 7 insertions(+), 21 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 5ead5e7f0ce16..ff93009583ab1 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -607,7 +607,7 @@ static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type,
 		start_get(ssif_info);
 }
 
-static int start_resend(struct ssif_info *ssif_info);
+static void start_resend(struct ssif_info *ssif_info);
 
 static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			     unsigned char *data, unsigned int len)
@@ -914,31 +914,17 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 	if (result < 0) {
 		ssif_info->retries_left--;
 		if (ssif_info->retries_left > 0) {
-			if (!start_resend(ssif_info)) {
-				ssif_inc_stat(ssif_info, send_retries);
-				return;
-			}
-			/* request failed, just return the error. */
-			ssif_inc_stat(ssif_info, send_errors);
-
-			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
-				dev_dbg(&ssif_info->client->dev,
-					"%s: Out of retries\n", __func__);
-			msg_done_handler(ssif_info, -EIO, NULL, 0);
+			start_resend(ssif_info);
 			return;
 		}
 
 		ssif_inc_stat(ssif_info, send_errors);
 
-		/*
-		 * Got an error on transmit, let the done routine
-		 * handle it.
-		 */
 		if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
 			dev_dbg(&ssif_info->client->dev,
-				"%s: Error  %d\n", __func__, result);
+				"%s: Out of retries\n", __func__);
 
-		msg_done_handler(ssif_info, result, NULL, 0);
+		msg_done_handler(ssif_info, -EIO, NULL, 0);
 		return;
 	}
 
@@ -1001,7 +987,7 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 	}
 }
 
-static int start_resend(struct ssif_info *ssif_info)
+static void start_resend(struct ssif_info *ssif_info)
 {
 	int command;
 
@@ -1026,7 +1012,6 @@ static int start_resend(struct ssif_info *ssif_info)
 
 	ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE,
 		   command, ssif_info->data, I2C_SMBUS_BLOCK_DATA);
-	return 0;
 }
 
 static int start_send(struct ssif_info *ssif_info,
@@ -1041,7 +1026,8 @@ static int start_send(struct ssif_info *ssif_info,
 	ssif_info->retries_left = SSIF_SEND_RETRIES;
 	memcpy(ssif_info->data + 1, data, len);
 	ssif_info->data_len = len;
-	return start_resend(ssif_info);
+	start_resend(ssif_info);
+	return 0;
 }
 
 /* Must be called with the message lock held. */
-- 
2.39.2

[PATCH 5.4 19/68] ipmi:ssif: Remove rtc_us_timer

[Greg Kroah-Hartman]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 9e8b89926fb87e5625bdde6fd5de2c31fb1d83bf ]

It was cruft left over from older handling of run to completion.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_ssif.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index ff93009583ab1..9f1fb8a30a823 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -248,12 +248,6 @@ struct ssif_info {
 	 */
 	bool                req_flags;
 
-	/*
-	 * Used to perform timer operations when run-to-completion
-	 * mode is on.  This is a countdown timer.
-	 */
-	int                 rtc_us_timer;
-
 	/* Used for sending/receiving data.  +1 for the length. */
 	unsigned char data[IPMI_MAX_MSG_LENGTH + 1];
 	unsigned int  data_len;
@@ -535,7 +529,6 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 
 static void start_get(struct ssif_info *ssif_info)
 {
-	ssif_info->rtc_us_timer = 0;
 	ssif_info->multi_pos = 0;
 
 	ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
@@ -627,7 +620,6 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result,
 
 			flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
 			ssif_info->waiting_alert = true;
-			ssif_info->rtc_us_timer = SSIF_MSG_USEC;
 			if (!ssif_info->stopping)
 				mod_timer(&ssif_info->retry_timer,
 					  jiffies + SSIF_MSG_JIFFIES);
@@ -978,7 +970,6 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 			/* Wait a jiffie then request the next message */
 			ssif_info->waiting_alert = true;
 			ssif_info->retries_left = SSIF_RECV_RETRIES;
-			ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
 			if (!ssif_info->stopping)
 				mod_timer(&ssif_info->retry_timer,
 					  jiffies + SSIF_MSG_PART_JIFFIES);
-- 
2.39.2

[PATCH 5.4 20/68] ipmi:ssif: Increase the message retry time

[Greg Kroah-Hartman]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 39721d62bbc16ebc9bb2bdc2c163658f33da3b0b ]

The spec states that the minimum message retry time is 60ms, but it was
set to 20ms.  Correct it.

Reported by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Stable-dep-of: 00bb7e763ec9 ("ipmi:ssif: Add a timer between request retries")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_ssif.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 9f1fb8a30a823..02ca0d9a0d8cb 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -79,7 +79,7 @@
 /*
  * Timer values
  */
-#define SSIF_MSG_USEC		20000	/* 20ms between message tries. */
+#define SSIF_MSG_USEC		60000	/* 60ms between message tries. */
 #define SSIF_MSG_PART_USEC	5000	/* 5ms for a message part */
 
 /* How many times to we retry sending/receiving the message. */
-- 
2.39.2

[PATCH 5.4 21/68] ipmi:ssif: Add a timer between request retries

[Greg Kroah-Hartman]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 00bb7e763ec9f384cb382455cb6ba5588b5375cf ]

The IPMI spec has a time (T6) specified between request retries.  Add
the handling for that.

Reported by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_ssif.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c
index 02ca0d9a0d8cb..d5f068a10a5a0 100644
--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -79,7 +79,8 @@
 /*
  * Timer values
  */
-#define SSIF_MSG_USEC		60000	/* 60ms between message tries. */
+#define SSIF_MSG_USEC		60000	/* 60ms between message tries (T3). */
+#define SSIF_REQ_RETRY_USEC	60000	/* 60ms between send retries (T6). */
 #define SSIF_MSG_PART_USEC	5000	/* 5ms for a message part */
 
 /* How many times to we retry sending/receiving the message. */
@@ -87,7 +88,9 @@
 #define	SSIF_RECV_RETRIES	250
 
 #define SSIF_MSG_MSEC		(SSIF_MSG_USEC / 1000)
+#define SSIF_REQ_RETRY_MSEC	(SSIF_REQ_RETRY_USEC / 1000)
 #define SSIF_MSG_JIFFIES	((SSIF_MSG_USEC * 1000) / TICK_NSEC)
+#define SSIF_REQ_RETRY_JIFFIES	((SSIF_REQ_RETRY_USEC * 1000) / TICK_NSEC)
 #define SSIF_MSG_PART_JIFFIES	((SSIF_MSG_PART_USEC * 1000) / TICK_NSEC)
 
 /*
@@ -236,6 +239,9 @@ struct ssif_info {
 	bool		    got_alert;
 	bool		    waiting_alert;
 
+	/* Used to inform the timeout that it should do a resend. */
+	bool		    do_resend;
+
 	/*
 	 * If set to true, this will request events the next time the
 	 * state machine is idle.
@@ -536,22 +542,28 @@ static void start_get(struct ssif_info *ssif_info)
 		  ssif_info->recv, I2C_SMBUS_BLOCK_DATA);
 }
 
+static void start_resend(struct ssif_info *ssif_info);
+
 static void retry_timeout(struct timer_list *t)
 {
 	struct ssif_info *ssif_info = from_timer(ssif_info, t, retry_timer);
 	unsigned long oflags, *flags;
-	bool waiting;
+	bool waiting, resend;
 
 	if (ssif_info->stopping)
 		return;
 
 	flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+	resend = ssif_info->do_resend;
+	ssif_info->do_resend = false;
 	waiting = ssif_info->waiting_alert;
 	ssif_info->waiting_alert = false;
 	ipmi_ssif_unlock_cond(ssif_info, flags);
 
 	if (waiting)
 		start_get(ssif_info);
+	if (resend)
+		start_resend(ssif_info);
 }
 
 static void watch_timeout(struct timer_list *t)
@@ -600,8 +612,6 @@ static void ssif_alert(struct i2c_client *client, enum i2c_alert_protocol type,
 		start_get(ssif_info);
 }
 
-static void start_resend(struct ssif_info *ssif_info);
-
 static void msg_done_handler(struct ssif_info *ssif_info, int result,
 			     unsigned char *data, unsigned int len)
 {
@@ -906,7 +916,13 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result,
 	if (result < 0) {
 		ssif_info->retries_left--;
 		if (ssif_info->retries_left > 0) {
-			start_resend(ssif_info);
+			/*
+			 * Wait the retry timeout time per the spec,
+			 * then redo the send.
+			 */
+			ssif_info->do_resend = true;
+			mod_timer(&ssif_info->retry_timer,
+				  jiffies + SSIF_REQ_RETRY_JIFFIES);
 			return;
 		}
 
@@ -1318,8 +1334,10 @@ static int do_cmd(struct i2c_client *client, int len, unsigned char *msg,
 	ret = i2c_smbus_write_block_data(client, SSIF_IPMI_REQUEST, len, msg);
 	if (ret) {
 		retry_cnt--;
-		if (retry_cnt > 0)
+		if (retry_cnt > 0) {
+			msleep(SSIF_REQ_RETRY_MSEC);
 			goto retry1;
+		}
 		return -ENODEV;
 	}
 
@@ -1459,8 +1477,10 @@ static int start_multipart_test(struct i2c_client *client,
 					 32, msg);
 	if (ret) {
 		retry_cnt--;
-		if (retry_cnt > 0)
+		if (retry_cnt > 0) {
+			msleep(SSIF_REQ_RETRY_MSEC);
 			goto retry_write;
+		}
 		dev_err(&client->dev, "Could not write multi-part start, though the BMC said it could handle it.  Just limit sends to one part.\n");
 		return ret;
 	}
-- 
2.39.2

[PATCH 5.4 22/68] irqdomain: Change the type of size in __irq_domain_add() to be consistent

[Greg Kroah-Hartman]

From: Bixuan Cui <cuibixuan@huawei.com>

[ Upstream commit 20c36ce2164f1774b487d443ece99b754bc6ad43 ]

The 'size' is used in struct_size(domain, revmap, size) and its input
parameter type is 'size_t'(unsigned int).
Changing the size to 'unsigned int' to make the type consistent.

Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com
Stable-dep-of: 8932c32c3053 ("irqdomain: Fix domain registration race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/irqdomain.h | 2 +-
 kernel/irq/irqdomain.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 824d7a19dd66e..2552f66a7a891 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -254,7 +254,7 @@ static inline struct fwnode_handle *irq_domain_alloc_fwnode(phys_addr_t *pa)
 }
 
 void irq_domain_free_fwnode(struct fwnode_handle *fwnode);
-struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
+struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
 				    irq_hw_number_t hwirq_max, int direct_max,
 				    const struct irq_domain_ops *ops,
 				    void *host_data);
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 3d1b570a1dadd..cfb5a96f023f7 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -127,7 +127,7 @@ EXPORT_SYMBOL_GPL(irq_domain_free_fwnode);
  * Allocates and initializes an irq_domain structure.
  * Returns pointer to IRQ domain, or NULL on failure.
  */
-struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
+struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
 				    irq_hw_number_t hwirq_max, int direct_max,
 				    const struct irq_domain_ops *ops,
 				    void *host_data)
-- 
2.39.2

[PATCH 5.4 23/68] irqdomain: Fix domain registration race

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 8932c32c3053accd50702b36e944ac2016cd103c ]

Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.

This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.

Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).

Fixes: afb7da83b9f4 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()")
Cc: stable@vger.kernel.org      # 3.19
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/irq/irqdomain.c | 62 +++++++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 19 deletions(-)

diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index cfb5a96f023f7..d40ae18fe6617 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -114,23 +114,12 @@ void irq_domain_free_fwnode(struct fwnode_handle *fwnode)
 }
 EXPORT_SYMBOL_GPL(irq_domain_free_fwnode);
 
-/**
- * __irq_domain_add() - Allocate a new irq_domain data structure
- * @fwnode: firmware node for the interrupt controller
- * @size: Size of linear map; 0 for radix mapping only
- * @hwirq_max: Maximum number of interrupts supported by controller
- * @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
- *              direct mapping
- * @ops: domain callbacks
- * @host_data: Controller private data pointer
- *
- * Allocates and initializes an irq_domain structure.
- * Returns pointer to IRQ domain, or NULL on failure.
- */
-struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
-				    irq_hw_number_t hwirq_max, int direct_max,
-				    const struct irq_domain_ops *ops,
-				    void *host_data)
+static struct irq_domain *__irq_domain_create(struct fwnode_handle *fwnode,
+					      unsigned int size,
+					      irq_hw_number_t hwirq_max,
+					      int direct_max,
+					      const struct irq_domain_ops *ops,
+					      void *host_data)
 {
 	struct device_node *of_node = to_of_node(fwnode);
 	struct irqchip_fwid *fwid;
@@ -222,12 +211,44 @@ struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int s
 	domain->revmap_direct_max_irq = direct_max;
 	irq_domain_check_hierarchy(domain);
 
+	return domain;
+}
+
+static void __irq_domain_publish(struct irq_domain *domain)
+{
 	mutex_lock(&irq_domain_mutex);
 	debugfs_add_domain_dir(domain);
 	list_add(&domain->link, &irq_domain_list);
 	mutex_unlock(&irq_domain_mutex);
 
 	pr_debug("Added domain %s\n", domain->name);
+}
+
+/**
+ * __irq_domain_add() - Allocate a new irq_domain data structure
+ * @fwnode: firmware node for the interrupt controller
+ * @size: Size of linear map; 0 for radix mapping only
+ * @hwirq_max: Maximum number of interrupts supported by controller
+ * @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
+ *              direct mapping
+ * @ops: domain callbacks
+ * @host_data: Controller private data pointer
+ *
+ * Allocates and initializes an irq_domain structure.
+ * Returns pointer to IRQ domain, or NULL on failure.
+ */
+struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, unsigned int size,
+				    irq_hw_number_t hwirq_max, int direct_max,
+				    const struct irq_domain_ops *ops,
+				    void *host_data)
+{
+	struct irq_domain *domain;
+
+	domain = __irq_domain_create(fwnode, size, hwirq_max, direct_max,
+				     ops, host_data);
+	if (domain)
+		__irq_domain_publish(domain);
+
 	return domain;
 }
 EXPORT_SYMBOL_GPL(__irq_domain_add);
@@ -1068,12 +1089,15 @@ struct irq_domain *irq_domain_create_hierarchy(struct irq_domain *parent,
 	struct irq_domain *domain;
 
 	if (size)
-		domain = irq_domain_create_linear(fwnode, size, ops, host_data);
+		domain = __irq_domain_create(fwnode, size, size, 0, ops, host_data);
 	else
-		domain = irq_domain_create_tree(fwnode, ops, host_data);
+		domain = __irq_domain_create(fwnode, 0, ~0, 0, ops, host_data);
+
 	if (domain) {
 		domain->parent = parent;
 		domain->flags |= flags;
+
+		__irq_domain_publish(domain);
 	}
 
 	return domain;
-- 
2.39.2

[PATCH 5.4 24/68] iommu/vt-d: Fix PASID directory pointer coherency

[Greg Kroah-Hartman]

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

[ Upstream commit 194b3348bdbb7db65375c72f3f774aee4cc6614e ]

On platforms that do not support IOMMU Extended capability bit 0
Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing
any translation structures. IOMMU access goes only directly to
memory. Intel IOMMU code was missing a flush for the PASID table
directory that resulted in the unrecoverable fault as shown below.

This patch adds clflush calls whenever allocating and updating
a PASID table directory to ensure cache coherency.

On the reverse direction, there's no need to clflush the PASID directory
pointer when we deactivate a context entry in that IOMMU hardware will
not see the old PASID directory pointer after we clear the context entry.
PASID directory entries are also never freed once allocated.

 DMAR: DRHD: handling fault status reg 3
 DMAR: [DMA Read NO_PASID] Request device [00:0d.2] fault addr 0x1026a4000
       [fault reason 0x51] SM: Present bit in Directory Entry is clear
 DMAR: Dump dmar1 table entries for IOVA 0x1026a4000
 DMAR: scalable mode root entry: hi 0x0000000102448001, low 0x0000000101b3e001
 DMAR: context entry: hi 0x0000000000000000, low 0x0000000101b4d401
 DMAR: pasid dir entry: 0x0000000101b4e001
 DMAR: pasid table entry[0]: 0x0000000000000109
 DMAR: pasid table entry[1]: 0x0000000000000001
 DMAR: pasid table entry[2]: 0x0000000000000000
 DMAR: pasid table entry[3]: 0x0000000000000000
 DMAR: pasid table entry[4]: 0x0000000000000000
 DMAR: pasid table entry[5]: 0x0000000000000000
 DMAR: pasid table entry[6]: 0x0000000000000000
 DMAR: pasid table entry[7]: 0x0000000000000000
 DMAR: PTE not present at level 4

Cc: <stable@vger.kernel.org>
Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230209212843.1788125-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel-pasid.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iommu/intel-pasid.c b/drivers/iommu/intel-pasid.c
index e7cb0b8a73327..58f060006ba31 100644
--- a/drivers/iommu/intel-pasid.c
+++ b/drivers/iommu/intel-pasid.c
@@ -166,6 +166,9 @@ int intel_pasid_alloc_table(struct device *dev)
 attach_out:
 	device_attach_pasid_table(info, pasid_table);
 
+	if (!ecap_coherent(info->iommu->ecap))
+		clflush_cache_range(pasid_table->table, size);
+
 	return 0;
 }
 
@@ -250,6 +253,10 @@ struct pasid_entry *intel_pasid_get_entry(struct device *dev, int pasid)
 
 		WRITE_ONCE(dir[dir_index].val,
 			   (u64)virt_to_phys(entries) | PASID_PTE_PRESENT);
+		if (!ecap_coherent(info->iommu->ecap)) {
+			clflush_cache_range(entries, VTD_PAGE_SIZE);
+			clflush_cache_range(&dir[dir_index].val, sizeof(*dir));
+		}
 	}
 	spin_unlock(&pasid_lock);
 
-- 
2.39.2

[PATCH 5.4 25/68] ARM: dts: exynos: Override thermal by label in Exynos4210

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 1708f56081e239a29ed8646aa7fde6853235d93f ]

Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired.  This will lead to run-time errors
that could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-16-krzk@kernel.org
Stable-dep-of: 408ab6786dbf ("ARM: dts: exynos: correct TMU phandle in Exynos4210")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos4210.dtsi | 36 +++++++++++++++----------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index f220716239dbf..d341dcad8da6d 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -372,26 +372,24 @@
 			};
 		};
 	};
+};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-				cpu_alert0: cpu-alert-0 {
-					temperature = <85000>; /* millicelsius */
-				};
-				cpu_alert1: cpu-alert-1 {
-					temperature = <100000>; /* millicelsius */
-				};
-				cpu_alert2: cpu-alert-2 {
-					temperature = <110000>; /* millicelsius */
-				};
-			};
-		};
-	};
+&cpu_alert0 {
+	temperature = <85000>; /* millicelsius */
+};
+
+&cpu_alert1 {
+	temperature = <100000>; /* millicelsius */
+};
+
+&cpu_alert2 {
+	temperature = <110000>; /* millicelsius */
+};
+
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
-- 
2.39.2

[PATCH 5.4 26/68] ARM: dts: exynos: correct TMU phandle in Exynos4210

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 408ab6786dbf6dd696488054c9559681112ef994 ]

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.

Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos4210.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d341dcad8da6d..505b49118d2cf 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -389,7 +389,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
-- 
2.39.2

[PATCH 5.4 27/68] ARM: dts: exynos: Override thermal by label in Exynos5250

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 7e86ef5cc89609cbad8b9dd2f476789c638dbb92 ]

Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired.  This will lead to run-time errors
that could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-8-krzk@kernel.org
Stable-dep-of: 33e2c595e2e4 ("ARM: dts: exynos: correct TMU phandle in Exynos5250")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250.dtsi | 38 +++++++++++++++----------------
 1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index fc966c10cf498..624fa234e7175 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1104,26 +1104,6 @@
 		};
 	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>,
-						      <&cpu1 15 15>;
-			       };
-		       };
-		};
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1139,6 +1119,24 @@
 	};
 };
 
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+	thermal-sensors = <&tmu 0>;
+
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 15 15>,
+					 <&cpu1 15 15>;
+		};
+	};
+};
+
 &dp {
 	power-domains = <&pd_disp1>;
 	clocks = <&clock CLK_DP>;
-- 
2.39.2

[PATCH 5.4 28/68] ARM: dts: exynos: correct TMU phandle in Exynos5250

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 ]

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.

Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 624fa234e7175..d5eccc86f5f78 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1122,7 +1122,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
-- 
2.39.2

[PATCH 5.4 29/68] ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1

[Greg Kroah-Hartman]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 1c651356f482ff08f6acef197a362f2e71d55a98 ]

Add trip points and cooling maps for GPU thermal zone for Odroid
XU3/XU4/HC1 boards. Trip points are based on the CPU thermal zone for the
those boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Stable-dep-of: 2e3d0e20d845 ("ARM: dts: exynos: correct TMU phandle in Odroid HC1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5422-odroidhc1.dts    | 30 ++++++++++
 .../boot/dts/exynos5422-odroidxu3-common.dtsi | 59 +++++++++++++++++++
 2 files changed, 89 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index fce5a4579693e..3235d7a27e042 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -215,6 +215,36 @@
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 8388720374932..5cf48af9884c9 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -357,6 +357,65 @@
 				};
 			};
 		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert2: gpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_alert3: gpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				gpu_alert4: gpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&gpu_alert3>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map4 {
+					trip = <&gpu_alert4>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
 	};
 };
 
-- 
2.39.2

[PATCH 5.4 30/68] ARM: dts: exynos: correct TMU phandle in Odroid HC1

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 ]

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:

  thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
  thermal_sys: Failed to find thermal zone for tmu id=0
  exynos-tmu 10064000.tmu: Failed to register sensor: -2
  exynos-tmu: probe of 10064000.tmu failed with error -2

Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5422-odroidhc1.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 3235d7a27e042..b423cea4c0e99 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -29,7 +29,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -84,7 +84,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -128,7 +128,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -172,7 +172,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -216,7 +216,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
-- 
2.39.2

[PATCH 5.4 31/68] ARM: dts: exynos: correct TMU phandle in Odroid XU3 family

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a ]

TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.  This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:

  thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
  thermal_sys: Failed to find thermal zone for tmu id=0
  exynos-tmu 10064000.tmu: Failed to register sensor: -2
  exynos-tmu: probe of 10064000.tmu failed with error -2

Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 5cf48af9884c9..56a0e1eba36fc 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -50,7 +50,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +139,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +212,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +285,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +358,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
-- 
2.39.2

[PATCH 5.4 32/68] SMB3: Backup intent flag missing from some more ops

[Greg Kroah-Hartman]

From: Amir Goldstein <amir73il@gmail.com>

[ Upstream commit 0f060936e490c6279dfe773d75d526d3d3d77111 ]

When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.

Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: d447e794a372 ("cifs: Fix uninitialized memory read in smb3_qfs_tcon()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsacl.c   | 14 +++-----
 fs/cifs/cifsfs.c    |  2 +-
 fs/cifs/cifsglob.h  |  6 ++--
 fs/cifs/cifsproto.h |  8 +++++
 fs/cifs/connect.c   |  2 +-
 fs/cifs/dir.c       |  5 +--
 fs/cifs/file.c      | 10 ++----
 fs/cifs/inode.c     |  8 ++---
 fs/cifs/ioctl.c     |  2 +-
 fs/cifs/link.c      | 18 +++-------
 fs/cifs/smb1ops.c   | 19 +++++------
 fs/cifs/smb2inode.c |  9 ++---
 fs/cifs/smb2ops.c   | 81 +++++++++++++++------------------------------
 fs/cifs/smb2proto.h |  2 +-
 14 files changed, 68 insertions(+), 118 deletions(-)

diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index 1f55072aa3023..1766d6d077f26 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -1056,7 +1056,7 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb,
 	struct cifs_ntsd *pntsd = NULL;
 	int oplock = 0;
 	unsigned int xid;
-	int rc, create_options = 0;
+	int rc;
 	struct cifs_tcon *tcon;
 	struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
 	struct cifs_fid fid;
@@ -1068,13 +1068,10 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb,
 	tcon = tlink_tcon(tlink);
 	xid = get_xid();
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = READ_CONTROL;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = path;
 	oparms.fid = &fid;
@@ -1119,7 +1116,7 @@ int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 {
 	int oplock = 0;
 	unsigned int xid;
-	int rc, access_flags, create_options = 0;
+	int rc, access_flags;
 	struct cifs_tcon *tcon;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
@@ -1132,9 +1129,6 @@ int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 	tcon = tlink_tcon(tlink);
 	xid = get_xid();
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	if (aclflag == CIFS_ACL_OWNER || aclflag == CIFS_ACL_GROUP)
 		access_flags = WRITE_OWNER;
 	else
@@ -1143,7 +1137,7 @@ int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = access_flags;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = path;
 	oparms.fid = &fid;
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index aa7827da7b178..871a7b044c1b8 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -275,7 +275,7 @@ cifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_ffree = 0;	/* unlimited */
 
 	if (server->ops->queryfs)
-		rc = server->ops->queryfs(xid, tcon, buf);
+		rc = server->ops->queryfs(xid, tcon, cifs_sb, buf);
 
 	free_xid(xid);
 	return rc;
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7c0eb110e2630..253321adc2664 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -300,7 +300,8 @@ struct smb_version_operations {
 			     const char *, struct dfs_info3_param **,
 			     unsigned int *, const struct nls_table *, int);
 	/* informational QFS call */
-	void (*qfs_tcon)(const unsigned int, struct cifs_tcon *);
+	void (*qfs_tcon)(const unsigned int, struct cifs_tcon *,
+			 struct cifs_sb_info *);
 	/* check if a path is accessible or not */
 	int (*is_path_accessible)(const unsigned int, struct cifs_tcon *,
 				  struct cifs_sb_info *, const char *);
@@ -408,7 +409,7 @@ struct smb_version_operations {
 			       struct cifsInodeInfo *);
 	/* query remote filesystem */
 	int (*queryfs)(const unsigned int, struct cifs_tcon *,
-		       struct kstatfs *);
+		       struct cifs_sb_info *, struct kstatfs *);
 	/* send mandatory brlock to the server */
 	int (*mand_lock)(const unsigned int, struct cifsFileInfo *, __u64,
 			 __u64, __u32, int, int, bool);
@@ -489,6 +490,7 @@ struct smb_version_operations {
 	/* ioctl passthrough for query_info */
 	int (*ioctl_query_info)(const unsigned int xid,
 				struct cifs_tcon *tcon,
+				struct cifs_sb_info *cifs_sb,
 				__le16 *path, int is_dir,
 				unsigned long p);
 	/* make unix special files (block, char, fifo, socket) */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 56a4740ae93ab..a5fab9afd699f 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -600,4 +600,12 @@ static inline int get_dfs_path(const unsigned int xid, struct cifs_ses *ses,
 }
 #endif
 
+static inline int cifs_create_options(struct cifs_sb_info *cifs_sb, int options)
+{
+	if (backup_cred(cifs_sb))
+		return options | CREATE_OPEN_BACKUP_INTENT;
+	else
+		return options;
+}
+
 #endif			/* _CIFSPROTO_H */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 25a2a98ebda8d..6c8dd7c0b83a2 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -4319,7 +4319,7 @@ static int mount_get_conns(struct smb_vol *vol, struct cifs_sb_info *cifs_sb,
 
 	/* do not care if a following call succeed - informational */
 	if (!tcon->pipe && server->ops->qfs_tcon) {
-		server->ops->qfs_tcon(*xid, tcon);
+		server->ops->qfs_tcon(*xid, tcon, cifs_sb);
 		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RO_CACHE) {
 			if (tcon->fsDevInfo.DeviceCharacteristics &
 			    cpu_to_le32(FILE_READ_ONLY_DEVICE))
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 9ae9a514676c3..548047a709bfc 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -357,13 +357,10 @@ cifs_do_create(struct inode *inode, struct dentry *direntry, unsigned int xid,
 	if (!tcon->unix_ext && (mode & S_IWUGO) == 0)
 		create_options |= CREATE_OPTION_READONLY;
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = desired_access;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, create_options);
 	oparms.disposition = disposition;
 	oparms.path = full_path;
 	oparms.fid = fid;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index eb9b34442b1d3..86924831fd4ba 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -223,9 +223,6 @@ cifs_nt_open(char *full_path, struct inode *inode, struct cifs_sb_info *cifs_sb,
 	if (!buf)
 		return -ENOMEM;
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	/* O_SYNC also has bit for O_DSYNC so following check picks up either */
 	if (f_flags & O_SYNC)
 		create_options |= CREATE_WRITE_THROUGH;
@@ -236,7 +233,7 @@ cifs_nt_open(char *full_path, struct inode *inode, struct cifs_sb_info *cifs_sb,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = desired_access;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, create_options);
 	oparms.disposition = disposition;
 	oparms.path = full_path;
 	oparms.fid = fid;
@@ -751,9 +748,6 @@ cifs_reopen_file(struct cifsFileInfo *cfile, bool can_flush)
 
 	desired_access = cifs_convert_flags(cfile->f_flags);
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	/* O_SYNC also has bit for O_DSYNC so following check picks up either */
 	if (cfile->f_flags & O_SYNC)
 		create_options |= CREATE_WRITE_THROUGH;
@@ -767,7 +761,7 @@ cifs_reopen_file(struct cifsFileInfo *cfile, bool can_flush)
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = desired_access;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, create_options);
 	oparms.disposition = disposition;
 	oparms.path = full_path;
 	oparms.fid = &cfile->fid;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fd9e289f3e72a..af0980c720c78 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -472,9 +472,7 @@ cifs_sfu_type(struct cifs_fattr *fattr, const char *path,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_READ;
-	oparms.create_options = CREATE_NOT_DIR;
-	if (backup_cred(cifs_sb))
-		oparms.create_options |= CREATE_OPEN_BACKUP_INTENT;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = path;
 	oparms.fid = &fid;
@@ -1225,7 +1223,7 @@ cifs_rename_pending_delete(const char *full_path, struct dentry *dentry,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = DELETE | FILE_WRITE_ATTRIBUTES;
-	oparms.create_options = CREATE_NOT_DIR;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = full_path;
 	oparms.fid = &fid;
@@ -1763,7 +1761,7 @@ cifs_do_rename(const unsigned int xid, struct dentry *from_dentry,
 	oparms.cifs_sb = cifs_sb;
 	/* open the file to be renamed -- we need DELETE perms */
 	oparms.desired_access = DELETE;
-	oparms.create_options = CREATE_NOT_DIR;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = from_path;
 	oparms.fid = &fid;
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 9266dddd4b1eb..bc08d856ee05f 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -65,7 +65,7 @@ static long cifs_ioctl_query_info(unsigned int xid, struct file *filep,
 
 	if (tcon->ses->server->ops->ioctl_query_info)
 		rc = tcon->ses->server->ops->ioctl_query_info(
-				xid, tcon, utf16_path,
+				xid, tcon, cifs_sb, utf16_path,
 				filep->private_data ? 0 : 1, p);
 	else
 		rc = -EOPNOTSUPP;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index b4b15d611deda..02949a2f28608 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -318,7 +318,7 @@ cifs_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_READ;
-	oparms.create_options = CREATE_NOT_DIR;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = path;
 	oparms.fid = &fid;
@@ -356,15 +356,11 @@ cifs_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
 	struct cifs_fid fid;
 	struct cifs_open_parms oparms;
 	struct cifs_io_parms io_parms;
-	int create_options = CREATE_NOT_DIR;
-
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
 
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_WRITE;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_CREATE;
 	oparms.path = path;
 	oparms.fid = &fid;
@@ -405,9 +401,7 @@ smb3_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_READ;
-	oparms.create_options = CREATE_NOT_DIR;
-	if (backup_cred(cifs_sb))
-		oparms.create_options |= CREATE_OPEN_BACKUP_INTENT;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_OPEN;
 	oparms.fid = &fid;
 	oparms.reconnect = false;
@@ -460,14 +454,10 @@ smb3_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
 	struct cifs_fid fid;
 	struct cifs_open_parms oparms;
 	struct cifs_io_parms io_parms;
-	int create_options = CREATE_NOT_DIR;
 	__le16 *utf16_path;
 	__u8 oplock = SMB2_OPLOCK_LEVEL_NONE;
 	struct kvec iov[2];
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	cifs_dbg(FYI, "%s: path: %s\n", __func__, path);
 
 	utf16_path = cifs_convert_path_to_utf16(path, cifs_sb);
@@ -477,7 +467,7 @@ smb3_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_WRITE;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_CREATE;
 	oparms.fid = &fid;
 	oparms.reconnect = false;
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index e523c05a44876..b130efaf8feb2 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -504,7 +504,8 @@ cifs_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *volume_info)
 }
 
 static void
-cifs_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
+cifs_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon,
+	      struct cifs_sb_info *cifs_sb)
 {
 	CIFSSMBQFSDeviceInfo(xid, tcon);
 	CIFSSMBQFSAttributeInfo(xid, tcon);
@@ -565,7 +566,7 @@ cifs_query_path_info(const unsigned int xid, struct cifs_tcon *tcon,
 		oparms.tcon = tcon;
 		oparms.cifs_sb = cifs_sb;
 		oparms.desired_access = FILE_READ_ATTRIBUTES;
-		oparms.create_options = 0;
+		oparms.create_options = cifs_create_options(cifs_sb, 0);
 		oparms.disposition = FILE_OPEN;
 		oparms.path = full_path;
 		oparms.fid = &fid;
@@ -793,7 +794,7 @@ smb_set_file_info(struct inode *inode, const char *full_path,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = SYNCHRONIZE | FILE_WRITE_ATTRIBUTES;
-	oparms.create_options = CREATE_NOT_DIR;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = full_path;
 	oparms.fid = &fid;
@@ -872,7 +873,7 @@ cifs_oplock_response(struct cifs_tcon *tcon, struct cifs_fid *fid,
 
 static int
 cifs_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
-	     struct kstatfs *buf)
+	     struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
 {
 	int rc = -EOPNOTSUPP;
 
@@ -970,7 +971,8 @@ cifs_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
-	oparms.create_options = OPEN_REPARSE_POINT;
+	oparms.create_options = cifs_create_options(cifs_sb,
+						    OPEN_REPARSE_POINT);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = full_path;
 	oparms.fid = &fid;
@@ -1029,7 +1031,6 @@ cifs_make_node(unsigned int xid, struct inode *inode,
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	struct inode *newinode = NULL;
 	int rc = -EPERM;
-	int create_options = CREATE_NOT_DIR | CREATE_OPTION_SPECIAL;
 	FILE_ALL_INFO *buf = NULL;
 	struct cifs_io_parms io_parms;
 	__u32 oplock = 0;
@@ -1090,13 +1091,11 @@ cifs_make_node(unsigned int xid, struct inode *inode,
 		goto out;
 	}
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_WRITE;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR |
+						    CREATE_OPTION_SPECIAL);
 	oparms.disposition = FILE_CREATE;
 	oparms.path = full_path;
 	oparms.fid = &fid;
diff --git a/fs/cifs/smb2inode.c b/fs/cifs/smb2inode.c
index f2a6f7f28340d..c9abda93d65b4 100644
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -98,9 +98,7 @@ smb2_compound_op(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.desired_access = desired_access;
 	oparms.disposition = create_disposition;
-	oparms.create_options = create_options;
-	if (backup_cred(cifs_sb))
-		oparms.create_options |= CREATE_OPEN_BACKUP_INTENT;
+	oparms.create_options = cifs_create_options(cifs_sb, create_options);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 	oparms.mode = mode;
@@ -456,7 +454,7 @@ smb2_query_path_info(const unsigned int xid, struct cifs_tcon *tcon,
 
 	/* If it is a root and its handle is cached then use it */
 	if (!strlen(full_path) && !no_cached_open) {
-		rc = open_shroot(xid, tcon, &fid);
+		rc = open_shroot(xid, tcon, cifs_sb, &fid);
 		if (rc)
 			goto out;
 
@@ -473,9 +471,6 @@ smb2_query_path_info(const unsigned int xid, struct cifs_tcon *tcon,
 		goto out;
 	}
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	cifs_get_readable_path(tcon, full_path, &cfile);
 	rc = smb2_compound_op(xid, tcon, cifs_sb, full_path,
 			      FILE_READ_ATTRIBUTES, FILE_OPEN, create_options,
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 944c575a4a705..a3bb2c7468c75 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -644,7 +644,8 @@ smb2_cached_lease_break(struct work_struct *work)
 /*
  * Open the directory at the root of a share
  */
-int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid)
+int open_shroot(unsigned int xid, struct cifs_tcon *tcon,
+		struct cifs_sb_info *cifs_sb, struct cifs_fid *pfid)
 {
 	struct cifs_ses *ses = tcon->ses;
 	struct TCP_Server_Info *server = ses->server;
@@ -696,7 +697,7 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid)
 	rqst[0].rq_nvec = SMB2_CREATE_IOV_SIZE;
 
 	oparms.tcon = tcon;
-	oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
 	oparms.disposition = FILE_OPEN;
 	oparms.fid = pfid;
@@ -812,7 +813,8 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid)
 }
 
 static void
-smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
+smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon,
+	      struct cifs_sb_info *cifs_sb)
 {
 	int rc;
 	__le16 srch_path = 0; /* Null - open root of share */
@@ -824,7 +826,7 @@ smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
 	oparms.disposition = FILE_OPEN;
-	oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -832,7 +834,7 @@ smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
 		rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL,
 			       NULL);
 	else
-		rc = open_shroot(xid, tcon, &fid);
+		rc = open_shroot(xid, tcon, cifs_sb, &fid);
 
 	if (rc)
 		return;
@@ -854,7 +856,8 @@ smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
 }
 
 static void
-smb2_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
+smb2_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon,
+	      struct cifs_sb_info *cifs_sb)
 {
 	int rc;
 	__le16 srch_path = 0; /* Null - open root of share */
@@ -865,7 +868,7 @@ smb2_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon)
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
 	oparms.disposition = FILE_OPEN;
-	oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -900,10 +903,7 @@ smb2_is_path_accessible(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
 	oparms.disposition = FILE_OPEN;
-	if (backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -1179,10 +1179,7 @@ smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_WRITE_EA;
 	oparms.disposition = FILE_OPEN;
-	if (backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -1414,6 +1411,7 @@ SMB2_request_res_key(const unsigned int xid, struct cifs_tcon *tcon,
 static int
 smb2_ioctl_query_info(const unsigned int xid,
 		      struct cifs_tcon *tcon,
+		      struct cifs_sb_info *cifs_sb,
 		      __le16 *path, int is_dir,
 		      unsigned long p)
 {
@@ -1439,6 +1437,7 @@ smb2_ioctl_query_info(const unsigned int xid,
 	struct kvec close_iov[1];
 	unsigned int size[2];
 	void *data[2];
+	int create_options = is_dir ? CREATE_NOT_FILE : CREATE_NOT_DIR;
 
 	memset(rqst, 0, sizeof(rqst));
 	resp_buftype[0] = resp_buftype[1] = resp_buftype[2] = CIFS_NO_BUFFER;
@@ -1474,10 +1473,7 @@ smb2_ioctl_query_info(const unsigned int xid,
 	memset(&oparms, 0, sizeof(oparms));
 	oparms.tcon = tcon;
 	oparms.disposition = FILE_OPEN;
-	if (is_dir)
-		oparms.create_options = CREATE_NOT_FILE;
-	else
-		oparms.create_options = CREATE_NOT_DIR;
+	oparms.create_options = cifs_create_options(cifs_sb, create_options);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -2074,10 +2070,7 @@ smb2_query_dir_first(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA;
 	oparms.disposition = FILE_OPEN;
-	if (backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = fid;
 	oparms.reconnect = false;
 
@@ -2278,10 +2271,7 @@ smb2_query_info_compound(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.desired_access = desired_access;
 	oparms.disposition = FILE_OPEN;
-	if (cifs_sb && backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -2337,7 +2327,7 @@ smb2_query_info_compound(const unsigned int xid, struct cifs_tcon *tcon,
 
 static int
 smb2_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
-	     struct kstatfs *buf)
+	     struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
 {
 	struct smb2_query_info_rsp *rsp;
 	struct smb2_fs_full_size_info *info = NULL;
@@ -2374,7 +2364,7 @@ smb2_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
 
 static int
 smb311_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
-	     struct kstatfs *buf)
+	       struct cifs_sb_info *cifs_sb, struct kstatfs *buf)
 {
 	int rc;
 	__le16 srch_path = 0; /* Null - open root of share */
@@ -2383,12 +2373,12 @@ smb311_queryfs(const unsigned int xid, struct cifs_tcon *tcon,
 	struct cifs_fid fid;
 
 	if (!tcon->posix_extensions)
-		return smb2_queryfs(xid, tcon, buf);
+		return smb2_queryfs(xid, tcon, cifs_sb, buf);
 
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
 	oparms.disposition = FILE_OPEN;
-	oparms.create_options = 0;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -2657,6 +2647,7 @@ smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 	struct smb2_create_rsp *create_rsp;
 	struct smb2_ioctl_rsp *ioctl_rsp;
 	struct reparse_data_buffer *reparse_buf;
+	int create_options = is_reparse_point ? OPEN_REPARSE_POINT : 0;
 	u32 plen;
 
 	cifs_dbg(FYI, "%s: path: %s\n", __func__, full_path);
@@ -2683,14 +2674,7 @@ smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon,
 	oparms.tcon = tcon;
 	oparms.desired_access = FILE_READ_ATTRIBUTES;
 	oparms.disposition = FILE_OPEN;
-
-	if (backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
-	if (is_reparse_point)
-		oparms.create_options = OPEN_REPARSE_POINT;
-
+	oparms.create_options = cifs_create_options(cifs_sb, create_options);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -2869,11 +2853,6 @@ get_smb2_acl_by_path(struct cifs_sb_info *cifs_sb,
 	tcon = tlink_tcon(tlink);
 	xid = get_xid();
 
-	if (backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
-
 	utf16_path = cifs_convert_path_to_utf16(path, cifs_sb);
 	if (!utf16_path) {
 		rc = -ENOMEM;
@@ -2884,6 +2863,7 @@ get_smb2_acl_by_path(struct cifs_sb_info *cifs_sb,
 	oparms.tcon = tcon;
 	oparms.desired_access = READ_CONTROL;
 	oparms.disposition = FILE_OPEN;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.fid = &fid;
 	oparms.reconnect = false;
 
@@ -2925,11 +2905,6 @@ set_smb2_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 	tcon = tlink_tcon(tlink);
 	xid = get_xid();
 
-	if (backup_cred(cifs_sb))
-		oparms.create_options = CREATE_OPEN_BACKUP_INTENT;
-	else
-		oparms.create_options = 0;
-
 	if (aclflag == CIFS_ACL_OWNER || aclflag == CIFS_ACL_GROUP)
 		access_flags = WRITE_OWNER;
 	else
@@ -2944,6 +2919,7 @@ set_smb2_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 
 	oparms.tcon = tcon;
 	oparms.desired_access = access_flags;
+	oparms.create_options = cifs_create_options(cifs_sb, 0);
 	oparms.disposition = FILE_OPEN;
 	oparms.path = path;
 	oparms.fid = &fid;
@@ -4481,7 +4457,6 @@ smb2_make_node(unsigned int xid, struct inode *inode,
 {
 	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 	int rc = -EPERM;
-	int create_options = CREATE_NOT_DIR | CREATE_OPTION_SPECIAL;
 	FILE_ALL_INFO *buf = NULL;
 	struct cifs_io_parms io_parms;
 	__u32 oplock = 0;
@@ -4517,13 +4492,11 @@ smb2_make_node(unsigned int xid, struct inode *inode,
 		goto out;
 	}
 
-	if (backup_cred(cifs_sb))
-		create_options |= CREATE_OPEN_BACKUP_INTENT;
-
 	oparms.tcon = tcon;
 	oparms.cifs_sb = cifs_sb;
 	oparms.desired_access = GENERIC_WRITE;
-	oparms.create_options = create_options;
+	oparms.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR |
+						    CREATE_OPTION_SPECIAL);
 	oparms.disposition = FILE_CREATE;
 	oparms.path = full_path;
 	oparms.fid = &fid;
diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h
index 57f7075a35871..4d4c0faa3d8a3 100644
--- a/fs/cifs/smb2proto.h
+++ b/fs/cifs/smb2proto.h
@@ -67,7 +67,7 @@ extern int smb3_handle_read_data(struct TCP_Server_Info *server,
 				 struct mid_q_entry *mid);
 
 extern int open_shroot(unsigned int xid, struct cifs_tcon *tcon,
-			struct cifs_fid *pfid);
+		       struct cifs_sb_info *cifs_sb, struct cifs_fid *pfid);
 extern void close_shroot(struct cached_fid *cfid);
 extern void move_smb2_info_to_cifs(FILE_ALL_INFO *dst,
 				   struct smb2_file_all_info *src);
-- 
2.39.2

[PATCH 5.4 33/68] cifs: Fix uninitialized memory read in smb3_qfs_tcon()

[Greg Kroah-Hartman]

From: Volker Lendecke <vl@samba.org>

[ Upstream commit d447e794a37288ec7a080aa1b044a8d9deebbab7 ]

oparms was not fully initialized

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2ops.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index a3bb2c7468c75..4cb0ebe7330eb 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -823,12 +823,13 @@ smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon,
 	struct cifs_fid fid;
 	bool no_cached_open = tcon->nohandlecache;
 
-	oparms.tcon = tcon;
-	oparms.desired_access = FILE_READ_ATTRIBUTES;
-	oparms.disposition = FILE_OPEN;
-	oparms.create_options = cifs_create_options(cifs_sb, 0);
-	oparms.fid = &fid;
-	oparms.reconnect = false;
+	oparms = (struct cifs_open_parms) {
+		.tcon = tcon,
+		.desired_access = FILE_READ_ATTRIBUTES,
+		.disposition = FILE_OPEN,
+		.create_options = cifs_create_options(cifs_sb, 0),
+		.fid = &fid,
+	};
 
 	if (no_cached_open)
 		rc = SMB2_open(xid, &oparms, &srch_path, &oplock, NULL, NULL,
-- 
2.39.2

[PATCH 5.4 34/68] scsi: core: Remove the /proc/scsi/${proc_name} directory earlier

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit fc663711b94468f4e1427ebe289c9f05669699c9 ]

Remove the /proc/scsi/${proc_name} directory earlier to fix a race
condition between unloading and reloading kernel modules. This fixes a bug
introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in
the SCSI core").

Fix the following kernel warning:

proc_dir_entry 'scsi/scsi_debug' already registered
WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0
Call Trace:
 proc_mkdir+0xb5/0xe0
 scsi_proc_hostdir_add+0xb5/0x170
 scsi_host_alloc+0x683/0x6c0
 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug]
 really_probe+0x159/0x540
 __driver_probe_device+0xdc/0x230
 driver_probe_device+0x4f/0x120
 __device_attach_driver+0xef/0x180
 bus_for_each_drv+0xe5/0x130
 __device_attach+0x127/0x290
 device_initial_probe+0x17/0x20
 bus_probe_device+0x110/0x130
 device_add+0x673/0xc80
 device_register+0x1e/0x30
 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug]
 scsi_debug_init+0x64f/0x1000 [scsi_debug]
 do_one_initcall+0xd7/0x470
 do_init_module+0xe7/0x330
 load_module+0x122a/0x12c0
 __do_sys_finit_module+0x124/0x1a0
 __x64_sys_finit_module+0x46/0x50
 do_syscall_64+0x38/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lore.kernel.org/r/20230210205200.36973-3-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hosts.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 45885e80992fb..b08d963013db6 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -179,6 +179,7 @@ void scsi_remove_host(struct Scsi_Host *shost)
 	scsi_forget_host(shost);
 	mutex_unlock(&shost->scan_mutex);
 	scsi_proc_host_rm(shost);
+	scsi_proc_hostdir_rm(shost->hostt);
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	if (scsi_host_set_state(shost, SHOST_DEL))
@@ -318,6 +319,7 @@ static void scsi_host_dev_release(struct device *dev)
 	struct Scsi_Host *shost = dev_to_shost(dev);
 	struct device *parent = dev->parent;
 
+	/* In case scsi_remove_host() has not been called. */
 	scsi_proc_hostdir_rm(shost->hostt);
 
 	/* Wait for functions invoked through call_rcu(&shost->rcu, ...) */
-- 
2.39.2

[PATCH 5.4 35/68] ext4: Fix possible corruption when moving a directory

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 0813299c586b175d7edb25f56412c54b812d0379 ]

When we are renaming a directory to a different directory, we need to
update '..' entry in the moved directory. However nothing prevents moved
directory from being modified and even converted from the inline format
to the normal format. When such race happens the rename code gets
confused and we crash. Fix the problem by locking the moved directory.

CC: stable@vger.kernel.org
Fixes: 32f7f22c0b52 ("ext4: let ext4_rename handle inline dir")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 30c37ef8b8af3..f9d11f59df7d2 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3855,9 +3855,16 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 			if (new.dir != old.dir && EXT4_DIR_LINK_MAX(new.dir))
 				goto end_rename;
 		}
+		/*
+		 * We need to protect against old.inode directory getting
+		 * converted from inline directory format into a normal one.
+		 */
+		inode_lock_nested(old.inode, I_MUTEX_NONDIR2);
 		retval = ext4_rename_dir_prepare(handle, &old);
-		if (retval)
+		if (retval) {
+			inode_unlock(old.inode);
 			goto end_rename;
+		}
 	}
 	/*
 	 * If we're renaming a file within an inline_data dir and adding or
@@ -3953,6 +3960,8 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 	} else {
 		ext4_journal_stop(handle);
 	}
+	if (old.dir_bh)
+		inode_unlock(old.inode);
 release_bh:
 	brelse(old.dir_bh);
 	brelse(old.bh);
-- 
2.39.2

[PATCH 5.4 36/68] drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit a7a4c19c36de1e4b99b06e4060ccc8ab837725bc ]

Rather than writing CP_PREEMPT_ENABLE_GLOBAL twice, follow the vendor
kernel and set CP_PREEMPT_ENABLE_LOCAL register instead. a5xx_submit()
will override it during submission, but let's get the sequence correct.

Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522638/
Link: https://lore.kernel.org/r/20230214020956.164473-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index e3579e5ffa146..593b8d83179c9 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -135,8 +135,8 @@ static void a5xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
 	OUT_RING(ring, 1);
 
 	/* Enable local preemption for finegrain preemption */
-	OUT_PKT7(ring, CP_PREEMPT_ENABLE_GLOBAL, 1);
-	OUT_RING(ring, 0x02);
+	OUT_PKT7(ring, CP_PREEMPT_ENABLE_LOCAL, 1);
+	OUT_RING(ring, 0x1);
 
 	/* Allow CP_CONTEXT_SWITCH_YIELD packets in the IB2 */
 	OUT_PKT7(ring, CP_YIELD_ENABLE, 1);
-- 
2.39.2

[PATCH 5.4 37/68] nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties

[Greg Kroah-Hartman]

From: Kang Chen <void0red@gmail.com>

[ Upstream commit 11f180a5d62a51b484e9648f9b310e1bd50b1a57 ]

devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later.

Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Kang Chen <void0red@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/fdp/i2c.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/nfc/fdp/i2c.c b/drivers/nfc/fdp/i2c.c
index ad0abb1f0bae9..7305f1a06e97c 100644
--- a/drivers/nfc/fdp/i2c.c
+++ b/drivers/nfc/fdp/i2c.c
@@ -255,6 +255,9 @@ static void fdp_nci_i2c_read_device_properties(struct device *dev,
 					   len, sizeof(**fw_vsc_cfg),
 					   GFP_KERNEL);
 
+		if (!*fw_vsc_cfg)
+			goto alloc_err;
+
 		r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME,
 						  *fw_vsc_cfg, len);
 
@@ -268,6 +271,7 @@ static void fdp_nci_i2c_read_device_properties(struct device *dev,
 		*fw_vsc_cfg = NULL;
 	}
 
+alloc_err:
 	dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s",
 		*clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no");
 }
-- 
2.39.2

[PATCH 5.4 38/68] ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 693aa2c0d9b6d5b1f2745d31b6e70d09dbbaf06e ]

ila_xlat_nl_cmd_get_mapping() generates an empty skb,
triggerring a recent sanity check [1].

Instead, return an error code, so that user space
can get it.

[1]
skb_assert_len
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
sp : ffff80001e0d6c40
x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0
x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00
x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10
x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0
x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600
x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e
Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (136418): [<ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600
softirqs last disabled at (136371): [<ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
---[ end trace 0000000000000000 ]---
skb len=0 headroom=0 headlen=0 tailroom=192
mac=(0,0) net=(0,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0
dev name=nlmon0 feat=0x0000000000005861

Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ila/ila_xlat.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv6/ila/ila_xlat.c b/net/ipv6/ila/ila_xlat.c
index 5fc1f4e0c0cf0..10f1367eb4ca0 100644
--- a/net/ipv6/ila/ila_xlat.c
+++ b/net/ipv6/ila/ila_xlat.c
@@ -477,6 +477,7 @@ int ila_xlat_nl_cmd_get_mapping(struct sk_buff *skb, struct genl_info *info)
 
 	rcu_read_lock();
 
+	ret = -ESRCH;
 	ila = ila_lookup_by_params(&xp, ilan);
 	if (ila) {
 		ret = ila_dump_info(ila,
-- 
2.39.2

[PATCH 5.4 39/68] selftests: nft_nat: ensuring the listening side is up before starting the client

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 2067e7a00aa604b94de31d64f29b8893b1696f26 ]

The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.

Before the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
  PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
  2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
  ERROR: inet port rewrite

After the fix:
  # ./nft_nat.sh
  PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
  PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
  PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
  PASS: inet port rewrite without l3 address

Fixes: 282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 4e15e81673104..67697d8ea59a5 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -404,6 +404,8 @@ EOF
 	echo SERVER-$family | ip netns exec "$ns1" timeout 5 socat -u STDIN TCP-LISTEN:2000 &
 	sc_s=$!
 
+	sleep 1
+
 	result=$(ip netns exec "$ns0" timeout 1 socat TCP:$daddr:2000 STDOUT)
 
 	if [ "$result" = "SERVER-inet" ];then
-- 
2.39.2

[PATCH 5.4 40/68] net: usb: lan78xx: Remove lots of set but unused ret variables

[Greg Kroah-Hartman]

From: Lee Jones <lee.jones@linaro.org>

[ Upstream commit 06cd7c46b3ab3f2252c61bf85b191236cf0254e1 ]

Fixes the following W=1 kernel build warning(s):

 drivers/net/usb/lan78xx.c: In function ‘lan78xx_read_raw_otp’:
 drivers/net/usb/lan78xx.c:825:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_write_raw_otp’:
 drivers/net/usb/lan78xx.c:879:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_deferred_multicast_write’:
 drivers/net/usb/lan78xx.c:1041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_update_flowcontrol’:
 drivers/net/usb/lan78xx.c:1127:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_init_mac_address’:
 drivers/net/usb/lan78xx.c:1666:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_link_status_change’:
 drivers/net/usb/lan78xx.c:1841:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_irq_bus_sync_unlock’:
 drivers/net/usb/lan78xx.c:1920:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan8835_fixup’:
 drivers/net/usb/lan78xx.c:1994:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_rx_max_frame_length’:
 drivers/net/usb/lan78xx.c:2192:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_change_mtu’:
 drivers/net/usb/lan78xx.c:2270:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_mac_addr’:
 drivers/net/usb/lan78xx.c:2299:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_features’:
 drivers/net/usb/lan78xx.c:2333:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_suspend’:
 drivers/net/usb/lan78xx.c:3807:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-25-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 168 ++++++++++++++++++--------------------
 1 file changed, 78 insertions(+), 90 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index ce3c8f476d75c..5454a20384284 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -824,20 +824,19 @@ static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
 				u32 length, u8 *data)
 {
 	int i;
-	int ret;
 	u32 buf;
 	unsigned long timeout;
 
-	ret = lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+	lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
 
 	if (buf & OTP_PWR_DN_PWRDN_N_) {
 		/* clear it and wait to be cleared */
-		ret = lan78xx_write_reg(dev, OTP_PWR_DN, 0);
+		lan78xx_write_reg(dev, OTP_PWR_DN, 0);
 
 		timeout = jiffies + HZ;
 		do {
 			usleep_range(1, 10);
-			ret = lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+			lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
 			if (time_after(jiffies, timeout)) {
 				netdev_warn(dev->net,
 					    "timeout on OTP_PWR_DN");
@@ -847,18 +846,18 @@ static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
 	}
 
 	for (i = 0; i < length; i++) {
-		ret = lan78xx_write_reg(dev, OTP_ADDR1,
+		lan78xx_write_reg(dev, OTP_ADDR1,
 					((offset + i) >> 8) & OTP_ADDR1_15_11);
-		ret = lan78xx_write_reg(dev, OTP_ADDR2,
+		lan78xx_write_reg(dev, OTP_ADDR2,
 					((offset + i) & OTP_ADDR2_10_3));
 
-		ret = lan78xx_write_reg(dev, OTP_FUNC_CMD, OTP_FUNC_CMD_READ_);
-		ret = lan78xx_write_reg(dev, OTP_CMD_GO, OTP_CMD_GO_GO_);
+		lan78xx_write_reg(dev, OTP_FUNC_CMD, OTP_FUNC_CMD_READ_);
+		lan78xx_write_reg(dev, OTP_CMD_GO, OTP_CMD_GO_GO_);
 
 		timeout = jiffies + HZ;
 		do {
 			udelay(1);
-			ret = lan78xx_read_reg(dev, OTP_STATUS, &buf);
+			lan78xx_read_reg(dev, OTP_STATUS, &buf);
 			if (time_after(jiffies, timeout)) {
 				netdev_warn(dev->net,
 					    "timeout on OTP_STATUS");
@@ -866,7 +865,7 @@ static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
 			}
 		} while (buf & OTP_STATUS_BUSY_);
 
-		ret = lan78xx_read_reg(dev, OTP_RD_DATA, &buf);
+		lan78xx_read_reg(dev, OTP_RD_DATA, &buf);
 
 		data[i] = (u8)(buf & 0xFF);
 	}
@@ -878,20 +877,19 @@ static int lan78xx_write_raw_otp(struct lan78xx_net *dev, u32 offset,
 				 u32 length, u8 *data)
 {
 	int i;
-	int ret;
 	u32 buf;
 	unsigned long timeout;
 
-	ret = lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+	lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
 
 	if (buf & OTP_PWR_DN_PWRDN_N_) {
 		/* clear it and wait to be cleared */
-		ret = lan78xx_write_reg(dev, OTP_PWR_DN, 0);
+		lan78xx_write_reg(dev, OTP_PWR_DN, 0);
 
 		timeout = jiffies + HZ;
 		do {
 			udelay(1);
-			ret = lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+			lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
 			if (time_after(jiffies, timeout)) {
 				netdev_warn(dev->net,
 					    "timeout on OTP_PWR_DN completion");
@@ -901,21 +899,21 @@ static int lan78xx_write_raw_otp(struct lan78xx_net *dev, u32 offset,
 	}
 
 	/* set to BYTE program mode */
-	ret = lan78xx_write_reg(dev, OTP_PRGM_MODE, OTP_PRGM_MODE_BYTE_);
+	lan78xx_write_reg(dev, OTP_PRGM_MODE, OTP_PRGM_MODE_BYTE_);
 
 	for (i = 0; i < length; i++) {
-		ret = lan78xx_write_reg(dev, OTP_ADDR1,
+		lan78xx_write_reg(dev, OTP_ADDR1,
 					((offset + i) >> 8) & OTP_ADDR1_15_11);
-		ret = lan78xx_write_reg(dev, OTP_ADDR2,
+		lan78xx_write_reg(dev, OTP_ADDR2,
 					((offset + i) & OTP_ADDR2_10_3));
-		ret = lan78xx_write_reg(dev, OTP_PRGM_DATA, data[i]);
-		ret = lan78xx_write_reg(dev, OTP_TST_CMD, OTP_TST_CMD_PRGVRFY_);
-		ret = lan78xx_write_reg(dev, OTP_CMD_GO, OTP_CMD_GO_GO_);
+		lan78xx_write_reg(dev, OTP_PRGM_DATA, data[i]);
+		lan78xx_write_reg(dev, OTP_TST_CMD, OTP_TST_CMD_PRGVRFY_);
+		lan78xx_write_reg(dev, OTP_CMD_GO, OTP_CMD_GO_GO_);
 
 		timeout = jiffies + HZ;
 		do {
 			udelay(1);
-			ret = lan78xx_read_reg(dev, OTP_STATUS, &buf);
+			lan78xx_read_reg(dev, OTP_STATUS, &buf);
 			if (time_after(jiffies, timeout)) {
 				netdev_warn(dev->net,
 					    "Timeout on OTP_STATUS completion");
@@ -1040,7 +1038,6 @@ static void lan78xx_deferred_multicast_write(struct work_struct *param)
 			container_of(param, struct lan78xx_priv, set_multicast);
 	struct lan78xx_net *dev = pdata->dev;
 	int i;
-	int ret;
 
 	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n",
 		  pdata->rfe_ctl);
@@ -1049,14 +1046,14 @@ static void lan78xx_deferred_multicast_write(struct work_struct *param)
 			       DP_SEL_VHF_HASH_LEN, pdata->mchash_table);
 
 	for (i = 1; i < NUM_OF_MAF; i++) {
-		ret = lan78xx_write_reg(dev, MAF_HI(i), 0);
-		ret = lan78xx_write_reg(dev, MAF_LO(i),
+		lan78xx_write_reg(dev, MAF_HI(i), 0);
+		lan78xx_write_reg(dev, MAF_LO(i),
 					pdata->pfilter_table[i][1]);
-		ret = lan78xx_write_reg(dev, MAF_HI(i),
+		lan78xx_write_reg(dev, MAF_HI(i),
 					pdata->pfilter_table[i][0]);
 	}
 
-	ret = lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
 }
 
 static void lan78xx_set_multicast(struct net_device *netdev)
@@ -1126,7 +1123,6 @@ static int lan78xx_update_flowcontrol(struct lan78xx_net *dev, u8 duplex,
 				      u16 lcladv, u16 rmtadv)
 {
 	u32 flow = 0, fct_flow = 0;
-	int ret;
 	u8 cap;
 
 	if (dev->fc_autoneg)
@@ -1149,10 +1145,10 @@ static int lan78xx_update_flowcontrol(struct lan78xx_net *dev, u8 duplex,
 		  (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
 		  (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
 
-	ret = lan78xx_write_reg(dev, FCT_FLOW, fct_flow);
+	lan78xx_write_reg(dev, FCT_FLOW, fct_flow);
 
 	/* threshold value should be set before enabling flow */
-	ret = lan78xx_write_reg(dev, FLOW, flow);
+	lan78xx_write_reg(dev, FLOW, flow);
 
 	return 0;
 }
@@ -1681,11 +1677,10 @@ static int lan78xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
 static void lan78xx_init_mac_address(struct lan78xx_net *dev)
 {
 	u32 addr_lo, addr_hi;
-	int ret;
 	u8 addr[6];
 
-	ret = lan78xx_read_reg(dev, RX_ADDRL, &addr_lo);
-	ret = lan78xx_read_reg(dev, RX_ADDRH, &addr_hi);
+	lan78xx_read_reg(dev, RX_ADDRL, &addr_lo);
+	lan78xx_read_reg(dev, RX_ADDRH, &addr_hi);
 
 	addr[0] = addr_lo & 0xFF;
 	addr[1] = (addr_lo >> 8) & 0xFF;
@@ -1718,12 +1713,12 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev)
 			  (addr[2] << 16) | (addr[3] << 24);
 		addr_hi = addr[4] | (addr[5] << 8);
 
-		ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-		ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+		lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+		lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 	}
 
-	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
-	ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+	lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
 
 	ether_addr_copy(dev->net->dev_addr, addr);
 }
@@ -1856,7 +1851,7 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev)
 static void lan78xx_link_status_change(struct net_device *net)
 {
 	struct phy_device *phydev = net->phydev;
-	int ret, temp;
+	int temp;
 
 	/* At forced 100 F/H mode, chip may fail to set mode correctly
 	 * when cable is switched between long(~50+m) and short one.
@@ -1867,7 +1862,7 @@ static void lan78xx_link_status_change(struct net_device *net)
 		/* disable phy interrupt */
 		temp = phy_read(phydev, LAN88XX_INT_MASK);
 		temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
-		ret = phy_write(phydev, LAN88XX_INT_MASK, temp);
+		phy_write(phydev, LAN88XX_INT_MASK, temp);
 
 		temp = phy_read(phydev, MII_BMCR);
 		temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
@@ -1881,7 +1876,7 @@ static void lan78xx_link_status_change(struct net_device *net)
 		/* enable phy interrupt back */
 		temp = phy_read(phydev, LAN88XX_INT_MASK);
 		temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
-		ret = phy_write(phydev, LAN88XX_INT_MASK, temp);
+		phy_write(phydev, LAN88XX_INT_MASK, temp);
 	}
 }
 
@@ -1935,14 +1930,13 @@ static void lan78xx_irq_bus_sync_unlock(struct irq_data *irqd)
 	struct lan78xx_net *dev =
 			container_of(data, struct lan78xx_net, domain_data);
 	u32 buf;
-	int ret;
 
 	/* call register access here because irq_bus_lock & irq_bus_sync_unlock
 	 * are only two callbacks executed in non-atomic contex.
 	 */
-	ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
+	lan78xx_read_reg(dev, INT_EP_CTL, &buf);
 	if (buf != data->irqenable)
-		ret = lan78xx_write_reg(dev, INT_EP_CTL, data->irqenable);
+		lan78xx_write_reg(dev, INT_EP_CTL, data->irqenable);
 
 	mutex_unlock(&data->irq_lock);
 }
@@ -2009,7 +2003,6 @@ static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
 static int lan8835_fixup(struct phy_device *phydev)
 {
 	int buf;
-	int ret;
 	struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
 
 	/* LED2/PME_N/IRQ_N/RGMII_ID pin to IRQ_N mode */
@@ -2019,11 +2012,11 @@ static int lan8835_fixup(struct phy_device *phydev)
 	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8010, buf);
 
 	/* RGMII MAC TXC Delay Enable */
-	ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
+	lan78xx_write_reg(dev, MAC_RGMII_ID,
 				MAC_RGMII_ID_TXC_DELAY_EN_);
 
 	/* RGMII TX DLL Tune Adjust */
-	ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+	lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
 
 	dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
 
@@ -2207,28 +2200,27 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 
 static int lan78xx_set_rx_max_frame_length(struct lan78xx_net *dev, int size)
 {
-	int ret = 0;
 	u32 buf;
 	bool rxenabled;
 
-	ret = lan78xx_read_reg(dev, MAC_RX, &buf);
+	lan78xx_read_reg(dev, MAC_RX, &buf);
 
 	rxenabled = ((buf & MAC_RX_RXEN_) != 0);
 
 	if (rxenabled) {
 		buf &= ~MAC_RX_RXEN_;
-		ret = lan78xx_write_reg(dev, MAC_RX, buf);
+		lan78xx_write_reg(dev, MAC_RX, buf);
 	}
 
 	/* add 4 to size for FCS */
 	buf &= ~MAC_RX_MAX_SIZE_MASK_;
 	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT_) & MAC_RX_MAX_SIZE_MASK_);
 
-	ret = lan78xx_write_reg(dev, MAC_RX, buf);
+	lan78xx_write_reg(dev, MAC_RX, buf);
 
 	if (rxenabled) {
 		buf |= MAC_RX_RXEN_;
-		ret = lan78xx_write_reg(dev, MAC_RX, buf);
+		lan78xx_write_reg(dev, MAC_RX, buf);
 	}
 
 	return 0;
@@ -2285,13 +2277,12 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu)
 	int ll_mtu = new_mtu + netdev->hard_header_len;
 	int old_hard_mtu = dev->hard_mtu;
 	int old_rx_urb_size = dev->rx_urb_size;
-	int ret;
 
 	/* no second zero-length packet read wanted after mtu-sized packets */
 	if ((ll_mtu % dev->maxpacket) == 0)
 		return -EDOM;
 
-	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN);
+	lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN);
 
 	netdev->mtu = new_mtu;
 
@@ -2314,7 +2305,6 @@ static int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
 	struct lan78xx_net *dev = netdev_priv(netdev);
 	struct sockaddr *addr = p;
 	u32 addr_lo, addr_hi;
-	int ret;
 
 	if (netif_running(netdev))
 		return -EBUSY;
@@ -2331,12 +2321,12 @@ static int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
 	addr_hi = netdev->dev_addr[4] |
 		  netdev->dev_addr[5] << 8;
 
-	ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
-	ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+	lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+	lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 
 	/* Added to support MAC address changes */
-	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
-	ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+	lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
 
 	return 0;
 }
@@ -2348,7 +2338,6 @@ static int lan78xx_set_features(struct net_device *netdev,
 	struct lan78xx_net *dev = netdev_priv(netdev);
 	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
 	unsigned long flags;
-	int ret;
 
 	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
 
@@ -2372,7 +2361,7 @@ static int lan78xx_set_features(struct net_device *netdev,
 
 	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
 
-	ret = lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
 
 	return 0;
 }
@@ -3828,7 +3817,6 @@ static u16 lan78xx_wakeframe_crc16(const u8 *buf, int len)
 static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
 {
 	u32 buf;
-	int ret;
 	int mask_index;
 	u16 crc;
 	u32 temp_wucsr;
@@ -3837,26 +3825,26 @@ static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
 	const u8 ipv6_multicast[3] = { 0x33, 0x33 };
 	const u8 arp_type[2] = { 0x08, 0x06 };
 
-	ret = lan78xx_read_reg(dev, MAC_TX, &buf);
+	lan78xx_read_reg(dev, MAC_TX, &buf);
 	buf &= ~MAC_TX_TXEN_;
-	ret = lan78xx_write_reg(dev, MAC_TX, buf);
-	ret = lan78xx_read_reg(dev, MAC_RX, &buf);
+	lan78xx_write_reg(dev, MAC_TX, buf);
+	lan78xx_read_reg(dev, MAC_RX, &buf);
 	buf &= ~MAC_RX_RXEN_;
-	ret = lan78xx_write_reg(dev, MAC_RX, buf);
+	lan78xx_write_reg(dev, MAC_RX, buf);
 
-	ret = lan78xx_write_reg(dev, WUCSR, 0);
-	ret = lan78xx_write_reg(dev, WUCSR2, 0);
-	ret = lan78xx_write_reg(dev, WK_SRC, 0xFFF1FF1FUL);
+	lan78xx_write_reg(dev, WUCSR, 0);
+	lan78xx_write_reg(dev, WUCSR2, 0);
+	lan78xx_write_reg(dev, WK_SRC, 0xFFF1FF1FUL);
 
 	temp_wucsr = 0;
 
 	temp_pmt_ctl = 0;
-	ret = lan78xx_read_reg(dev, PMT_CTL, &temp_pmt_ctl);
+	lan78xx_read_reg(dev, PMT_CTL, &temp_pmt_ctl);
 	temp_pmt_ctl &= ~PMT_CTL_RES_CLR_WKP_EN_;
 	temp_pmt_ctl |= PMT_CTL_RES_CLR_WKP_STS_;
 
 	for (mask_index = 0; mask_index < NUM_OF_WUF_CFG; mask_index++)
-		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_CFG(mask_index), 0);
 
 	mask_index = 0;
 	if (wol & WAKE_PHY) {
@@ -3885,30 +3873,30 @@ static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
 
 		/* set WUF_CFG & WUF_MASK for IPv4 Multicast */
 		crc = lan78xx_wakeframe_crc16(ipv4_multicast, 3);
-		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index),
+		lan78xx_write_reg(dev, WUF_CFG(mask_index),
 					WUF_CFGX_EN_ |
 					WUF_CFGX_TYPE_MCAST_ |
 					(0 << WUF_CFGX_OFFSET_SHIFT_) |
 					(crc & WUF_CFGX_CRC16_MASK_));
 
-		ret = lan78xx_write_reg(dev, WUF_MASK0(mask_index), 7);
-		ret = lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
-		ret = lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
-		ret = lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK0(mask_index), 7);
+		lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
 		mask_index++;
 
 		/* for IPv6 Multicast */
 		crc = lan78xx_wakeframe_crc16(ipv6_multicast, 2);
-		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index),
+		lan78xx_write_reg(dev, WUF_CFG(mask_index),
 					WUF_CFGX_EN_ |
 					WUF_CFGX_TYPE_MCAST_ |
 					(0 << WUF_CFGX_OFFSET_SHIFT_) |
 					(crc & WUF_CFGX_CRC16_MASK_));
 
-		ret = lan78xx_write_reg(dev, WUF_MASK0(mask_index), 3);
-		ret = lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
-		ret = lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
-		ret = lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK0(mask_index), 3);
+		lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
 		mask_index++;
 
 		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
@@ -3929,16 +3917,16 @@ static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
 		 * for packettype (offset 12,13) = ARP (0x0806)
 		 */
 		crc = lan78xx_wakeframe_crc16(arp_type, 2);
-		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index),
+		lan78xx_write_reg(dev, WUF_CFG(mask_index),
 					WUF_CFGX_EN_ |
 					WUF_CFGX_TYPE_ALL_ |
 					(0 << WUF_CFGX_OFFSET_SHIFT_) |
 					(crc & WUF_CFGX_CRC16_MASK_));
 
-		ret = lan78xx_write_reg(dev, WUF_MASK0(mask_index), 0x3000);
-		ret = lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
-		ret = lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
-		ret = lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK0(mask_index), 0x3000);
+		lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
+		lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
 		mask_index++;
 
 		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
@@ -3946,7 +3934,7 @@ static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
 		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
 	}
 
-	ret = lan78xx_write_reg(dev, WUCSR, temp_wucsr);
+	lan78xx_write_reg(dev, WUCSR, temp_wucsr);
 
 	/* when multiple WOL bits are set */
 	if (hweight_long((unsigned long)wol) > 1) {
@@ -3954,16 +3942,16 @@ static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
 		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
 		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
 	}
-	ret = lan78xx_write_reg(dev, PMT_CTL, temp_pmt_ctl);
+	lan78xx_write_reg(dev, PMT_CTL, temp_pmt_ctl);
 
 	/* clear WUPS */
-	ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+	lan78xx_read_reg(dev, PMT_CTL, &buf);
 	buf |= PMT_CTL_WUPS_MASK_;
-	ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+	lan78xx_write_reg(dev, PMT_CTL, buf);
 
-	ret = lan78xx_read_reg(dev, MAC_RX, &buf);
+	lan78xx_read_reg(dev, MAC_RX, &buf);
 	buf |= MAC_RX_RXEN_;
-	ret = lan78xx_write_reg(dev, MAC_RX, buf);
+	lan78xx_write_reg(dev, MAC_RX, buf);
 
 	return 0;
 }
-- 
2.39.2

[PATCH 5.4 41/68] net: lan78xx: fix accessing the LAN7800s internal phy specific registers from the MAC driver

[Greg Kroah-Hartman]

From: Yuiko Oshino <yuiko.oshino@microchip.com>

[ Upstream commit e57cf3639c323eeed05d3725fd82f91b349adca8 ]

Move the LAN7800 internal phy (phy ID  0x0007c132) specific register
accesses to the phy driver (microchip.c).

Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."

I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.

Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/microchip.c | 32 ++++++++++++++++++++++++++++++++
 drivers/net/usb/lan78xx.c   | 27 +--------------------------
 2 files changed, 33 insertions(+), 26 deletions(-)

diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index a644e8e5071c3..375bbd60b38af 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -326,6 +326,37 @@ static int lan88xx_config_aneg(struct phy_device *phydev)
 	return genphy_config_aneg(phydev);
 }
 
+static void lan88xx_link_change_notify(struct phy_device *phydev)
+{
+	int temp;
+
+	/* At forced 100 F/H mode, chip may fail to set mode correctly
+	 * when cable is switched between long(~50+m) and short one.
+	 * As workaround, set to 10 before setting to 100
+	 * at forced 100 F/H mode.
+	 */
+	if (!phydev->autoneg && phydev->speed == 100) {
+		/* disable phy interrupt */
+		temp = phy_read(phydev, LAN88XX_INT_MASK);
+		temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
+		phy_write(phydev, LAN88XX_INT_MASK, temp);
+
+		temp = phy_read(phydev, MII_BMCR);
+		temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
+		phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
+		temp |= BMCR_SPEED100;
+		phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
+
+		/* clear pending interrupt generated while workaround */
+		temp = phy_read(phydev, LAN88XX_INT_STS);
+
+		/* enable phy interrupt back */
+		temp = phy_read(phydev, LAN88XX_INT_MASK);
+		temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
+		phy_write(phydev, LAN88XX_INT_MASK, temp);
+	}
+}
+
 static struct phy_driver microchip_phy_driver[] = {
 {
 	.phy_id		= 0x0007c130,
@@ -339,6 +370,7 @@ static struct phy_driver microchip_phy_driver[] = {
 
 	.config_init	= lan88xx_config_init,
 	.config_aneg	= lan88xx_config_aneg,
+	.link_change_notify = lan88xx_link_change_notify,
 
 	.ack_interrupt	= lan88xx_phy_ack_interrupt,
 	.config_intr	= lan88xx_phy_config_intr,
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 5454a20384284..b51017966bb37 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1851,33 +1851,8 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev)
 static void lan78xx_link_status_change(struct net_device *net)
 {
 	struct phy_device *phydev = net->phydev;
-	int temp;
-
-	/* At forced 100 F/H mode, chip may fail to set mode correctly
-	 * when cable is switched between long(~50+m) and short one.
-	 * As workaround, set to 10 before setting to 100
-	 * at forced 100 F/H mode.
-	 */
-	if (!phydev->autoneg && (phydev->speed == 100)) {
-		/* disable phy interrupt */
-		temp = phy_read(phydev, LAN88XX_INT_MASK);
-		temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
-		phy_write(phydev, LAN88XX_INT_MASK, temp);
 
-		temp = phy_read(phydev, MII_BMCR);
-		temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
-		phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
-		temp |= BMCR_SPEED100;
-		phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
-
-		/* clear pending interrupt generated while workaround */
-		temp = phy_read(phydev, LAN88XX_INT_STS);
-
-		/* enable phy interrupt back */
-		temp = phy_read(phydev, LAN88XX_INT_MASK);
-		temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
-		phy_write(phydev, LAN88XX_INT_MASK, temp);
-	}
+	phy_print_status(phydev);
 }
 
 static int irq_map(struct irq_domain *d, unsigned int irq,
-- 
2.39.2

[PATCH 5.4 42/68] net: caif: Fix use-after-free in cfusbl_device_notify()

[Greg Kroah-Hartman]

From: Shigeru Yoshida <syoshida@redhat.com>

[ Upstream commit 9781e98a97110f5e76999058368b4be76a788484 ]

syzbot reported use-after-free in cfusbl_device_notify() [1].  This
causes a stack trace like below:

BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214

CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
 print_report mm/kasan/report.c:429 [inline]
 kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
 call_netdevice_notifiers net/core/dev.c:1997 [inline]
 netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
 netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>

When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.

Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.

When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed.  This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.

This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification.

Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com>
Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/caif/caif_usb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/caif/caif_usb.c b/net/caif/caif_usb.c
index 46c62dd1479b8..862226be22868 100644
--- a/net/caif/caif_usb.c
+++ b/net/caif/caif_usb.c
@@ -134,6 +134,9 @@ static int cfusbl_device_notify(struct notifier_block *me, unsigned long what,
 	struct usb_device *usbdev;
 	int res;
 
+	if (what == NETDEV_UNREGISTER && dev->reg_state >= NETREG_UNREGISTERED)
+		return 0;
+
 	/* Check whether we have a NCM device, and find its VID/PID. */
 	if (!(dev->dev.parent && dev->dev.parent->driver &&
 	      strcmp(dev->dev.parent->driver->name, "cdc_ncm") == 0))
-- 
2.39.2

[PATCH 5.4 43/68] bnxt_en: Avoid order-5 memory allocation for TPA data

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit accd7e23693aaaa9aa0d3e9eca0ae77d1be80ab3 ]

The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring.  On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages.  Memory allocation failure has been reported:

NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1
Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022
Call Trace:
 dump_stack+0x57/0x6e
 warn_alloc.cold.120+0x7b/0xdd
 ? _cond_resched+0x15/0x30
 ? __alloc_pages_direct_compact+0x15f/0x170
 __alloc_pages_slowpath.constprop.108+0xc58/0xc70
 __alloc_pages_nodemask+0x2d0/0x300
 kmalloc_order+0x24/0xe0
 kmalloc_order_trace+0x19/0x80
 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en]
 ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en]
 __bnxt_open_nic+0x12e/0x780 [bnxt_en]
 bnxt_open+0x10b/0x240 [bnxt_en]
 __dev_open+0xe9/0x180
 __dev_change_flags+0x1af/0x220
 dev_change_flags+0x21/0x60
 do_setlink+0x35c/0x1100

Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance.  This will reduce it to order-0 allocations.

Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index ef8225b7445d3..9fb1da36e9eb8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -2747,7 +2747,7 @@ static int bnxt_alloc_ring(struct bnxt *bp, struct bnxt_ring_mem_info *rmem)
 
 static void bnxt_free_tpa_info(struct bnxt *bp)
 {
-	int i;
+	int i, j;
 
 	for (i = 0; i < bp->rx_nr_rings; i++) {
 		struct bnxt_rx_ring_info *rxr = &bp->rx_ring[i];
@@ -2755,8 +2755,10 @@ static void bnxt_free_tpa_info(struct bnxt *bp)
 		kfree(rxr->rx_tpa_idx_map);
 		rxr->rx_tpa_idx_map = NULL;
 		if (rxr->rx_tpa) {
-			kfree(rxr->rx_tpa[0].agg_arr);
-			rxr->rx_tpa[0].agg_arr = NULL;
+			for (j = 0; j < bp->max_tpa; j++) {
+				kfree(rxr->rx_tpa[j].agg_arr);
+				rxr->rx_tpa[j].agg_arr = NULL;
+			}
 		}
 		kfree(rxr->rx_tpa);
 		rxr->rx_tpa = NULL;
@@ -2765,14 +2767,13 @@ static void bnxt_free_tpa_info(struct bnxt *bp)
 
 static int bnxt_alloc_tpa_info(struct bnxt *bp)
 {
-	int i, j, total_aggs = 0;
+	int i, j;
 
 	bp->max_tpa = MAX_TPA;
 	if (bp->flags & BNXT_FLAG_CHIP_P5) {
 		if (!bp->max_tpa_v2)
 			return 0;
 		bp->max_tpa = max_t(u16, bp->max_tpa_v2, MAX_TPA_P5);
-		total_aggs = bp->max_tpa * MAX_SKB_FRAGS;
 	}
 
 	for (i = 0; i < bp->rx_nr_rings; i++) {
@@ -2786,12 +2787,12 @@ static int bnxt_alloc_tpa_info(struct bnxt *bp)
 
 		if (!(bp->flags & BNXT_FLAG_CHIP_P5))
 			continue;
-		agg = kcalloc(total_aggs, sizeof(*agg), GFP_KERNEL);
-		rxr->rx_tpa[0].agg_arr = agg;
-		if (!agg)
-			return -ENOMEM;
-		for (j = 1; j < bp->max_tpa; j++)
-			rxr->rx_tpa[j].agg_arr = agg + j * MAX_SKB_FRAGS;
+		for (j = 0; j < bp->max_tpa; j++) {
+			agg = kcalloc(MAX_SKB_FRAGS, sizeof(*agg), GFP_KERNEL);
+			if (!agg)
+				return -ENOMEM;
+			rxr->rx_tpa[j].agg_arr = agg;
+		}
 		rxr->rx_tpa_idx_map = kzalloc(sizeof(*rxr->rx_tpa_idx_map),
 					      GFP_KERNEL);
 		if (!rxr->rx_tpa_idx_map)
-- 
2.39.2

[PATCH 5.4 44/68] netfilter: tproxy: fix deadlock due to missing BH disable

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 4a02426787bf024dafdb79b362285ee325de3f5e ]

The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.

Functions that are called from either xtables or nftables must assume
that they can be called in process context.

inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.

Add a small helper that takes care of this and use it.

Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nf_tproxy.h   | 7 +++++++
 net/ipv4/netfilter/nf_tproxy_ipv4.c | 2 +-
 net/ipv6/netfilter/nf_tproxy_ipv6.c | 2 +-
 3 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/net/netfilter/nf_tproxy.h b/include/net/netfilter/nf_tproxy.h
index 82d0e41b76f22..faa108b1ba675 100644
--- a/include/net/netfilter/nf_tproxy.h
+++ b/include/net/netfilter/nf_tproxy.h
@@ -17,6 +17,13 @@ static inline bool nf_tproxy_sk_is_transparent(struct sock *sk)
 	return false;
 }
 
+static inline void nf_tproxy_twsk_deschedule_put(struct inet_timewait_sock *tw)
+{
+	local_bh_disable();
+	inet_twsk_deschedule_put(tw);
+	local_bh_enable();
+}
+
 /* assign a socket to the skb -- consumes sk */
 static inline void nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk)
 {
diff --git a/net/ipv4/netfilter/nf_tproxy_ipv4.c b/net/ipv4/netfilter/nf_tproxy_ipv4.c
index b2bae0b0e42a1..61cb2341f50fe 100644
--- a/net/ipv4/netfilter/nf_tproxy_ipv4.c
+++ b/net/ipv4/netfilter/nf_tproxy_ipv4.c
@@ -38,7 +38,7 @@ nf_tproxy_handle_time_wait4(struct net *net, struct sk_buff *skb,
 					    hp->source, lport ? lport : hp->dest,
 					    skb->dev, NF_TPROXY_LOOKUP_LISTENER);
 		if (sk2) {
-			inet_twsk_deschedule_put(inet_twsk(sk));
+			nf_tproxy_twsk_deschedule_put(inet_twsk(sk));
 			sk = sk2;
 		}
 	}
diff --git a/net/ipv6/netfilter/nf_tproxy_ipv6.c b/net/ipv6/netfilter/nf_tproxy_ipv6.c
index 34d51cd426b0c..00761924f2766 100644
--- a/net/ipv6/netfilter/nf_tproxy_ipv6.c
+++ b/net/ipv6/netfilter/nf_tproxy_ipv6.c
@@ -63,7 +63,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff,
 					    lport ? lport : hp->dest,
 					    skb->dev, NF_TPROXY_LOOKUP_LISTENER);
 		if (sk2) {
-			inet_twsk_deschedule_put(inet_twsk(sk));
+			nf_tproxy_twsk_deschedule_put(inet_twsk(sk));
 			sk = sk2;
 		}
 	}
-- 
2.39.2

[PATCH 5.4 45/68] btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

[Greg Kroah-Hartman]

From: Lorenz Bauer <lorenz.bauer@isovalent.com>

[ Upstream commit 9b459804ff9973e173fabafba2a1319f771e85fa ]

btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:

    [1] DATASEC a size=2 vlen=2
        type_id=4 offset=0 size=1
        type_id=7 offset=1 size=1
    [2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
    [3] PTR (anon) type_id=2
    [4] VAR a type_id=3 linkage=0
    [5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
    [6] TYPEDEF td type_id=5
    [7] VAR b type_id=6 linkage=0

This error message is printed during btf_check_all_types:

    [1] DATASEC a size=2 vlen=2
        type_id=7 offset=1 size=1 Invalid type

By tracing btf_*_resolve we can pinpoint the problem:

    btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
        btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
            btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
        btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
    btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22

The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.

    if (!env_type_is_resolve_sink(env, var_type) &&
        !env_type_is_resolved(env, var_type_id)) {
        env_stack_set_next_member(env, i + 1);
        return env_stack_push(env, var_type, var_type_id);
    }

env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:

    (btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()

Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.

    if (!btf_type_id_size(btf, &type_id, &type_size)) {
        btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
        return -EINVAL;
    }

Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.

To summarise, the following conditions are necessary:

- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
  TYPE_TAG

The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.

Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/btf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 8fd65a0eb7f3e..5189bc5ebd895 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -2719,6 +2719,7 @@ static int btf_datasec_resolve(struct btf_verifier_env *env,
 	struct btf *btf = env->btf;
 	u16 i;
 
+	env->resolve_mode = RESOLVE_TBD;
 	for_each_vsi_from(i, v->next_member, v->t, vsi) {
 		u32 var_type_id = vsi->type, type_id, type_size = 0;
 		const struct btf_type *var_type = btf_type_by_id(env->btf,
-- 
2.39.2

[PATCH 5.4 46/68] scsi: megaraid_sas: Update max supported LD IDs to 240

[Greg Kroah-Hartman]

From: Chandrakanth Patil <chandrakanth.patil@broadcom.com>

[ Upstream commit bfa659177dcba48cf13f2bd88c1972f12a60bf1c ]

The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.

To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.

Fixes: ae6874ba4b43 ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas.h    | 2 ++
 drivers/scsi/megaraid/megaraid_sas_fp.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index aa62cc8ffd0af..ce0c36fa26bf7 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1515,6 +1515,8 @@ struct megasas_ctrl_info {
 #define MEGASAS_MAX_LD_IDS			(MEGASAS_MAX_LD_CHANNELS * \
 						MEGASAS_MAX_DEV_PER_CHANNEL)
 
+#define MEGASAS_MAX_SUPPORTED_LD_IDS		240
+
 #define MEGASAS_MAX_SECTORS                    (2*1024)
 #define MEGASAS_MAX_SECTORS_IEEE		(2*128)
 #define MEGASAS_DBG_LVL				1
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index 8bfb46dbbed3a..ff20f47090810 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -359,7 +359,7 @@ u8 MR_ValidateMapInfo(struct megasas_instance *instance, u64 map_id)
 		ld = MR_TargetIdToLdGet(i, drv_map);
 
 		/* For non existing VDs, iterate to next VD*/
-		if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
+		if (ld >= MEGASAS_MAX_SUPPORTED_LD_IDS)
 			continue;
 
 		raid = MR_LdRaidGet(ld, drv_map);
-- 
2.39.2

[PATCH 5.4 47/68] net/smc: fix fallback failed while sendmsg with fastopen

[Greg Kroah-Hartman]

From: D. Wythe <alibuda@linux.alibaba.com>

[ Upstream commit ce7ca794712f186da99719e8b4e97bd5ddbb04c3 ]

Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.

For the application, the general usages of MSG_FASTOPEN likes

fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)

Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.

Fixes: ee9dfbef02d1 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>

v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5d696b7fb47e1..b398d72a7bc39 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1542,16 +1542,14 @@ static int smc_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 {
 	struct sock *sk = sock->sk;
 	struct smc_sock *smc;
-	int rc = -EPIPE;
+	int rc;
 
 	smc = smc_sk(sk);
 	lock_sock(sk);
-	if ((sk->sk_state != SMC_ACTIVE) &&
-	    (sk->sk_state != SMC_APPCLOSEWAIT1) &&
-	    (sk->sk_state != SMC_INIT))
-		goto out;
 
+	/* SMC does not support connect with fastopen */
 	if (msg->msg_flags & MSG_FASTOPEN) {
+		/* not connected yet, fallback */
 		if (sk->sk_state == SMC_INIT && !smc->connect_nonblock) {
 			smc_switch_to_fallback(smc);
 			smc->fallback_rsn = SMC_CLC_DECL_OPTUNSUPP;
@@ -1559,6 +1557,11 @@ static int smc_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 			rc = -EINVAL;
 			goto out;
 		}
+	} else if ((sk->sk_state != SMC_ACTIVE) &&
+		   (sk->sk_state != SMC_APPCLOSEWAIT1) &&
+		   (sk->sk_state != SMC_INIT)) {
+		rc = -EPIPE;
+		goto out;
 	}
 
 	if (smc->use_fallback)
-- 
2.39.2

[PATCH 5.4 48/68] riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode

[Greg Kroah-Hartman]

From: Alexandre Ghiti <alexghiti@rivosinc.com>

[ Upstream commit 76950340cf03b149412fe0d5f0810e52ac1df8cb ]

When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:

[    0.000000] ==================================================================
[    0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[    0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0
[    0.000000]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] Call Trace:
[    0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[    0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8
[    0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[    0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84
[    0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[    0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[    0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[    0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[    0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84
[    0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[    0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20
[    0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[    0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[    0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[    0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[    0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe
[    0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca
[    0.000000]
[    0.000000] The buggy address belongs to stack of task swapper/0
[    0.000000]  and is located at offset 0 in frame:
[    0.000000]  stack_trace_save+0x0/0xa6
[    0.000000]
[    0.000000] This frame has 1 object:
[    0.000000]  [32, 56) 'c'
[    0.000000]
[    0.000000] The buggy address belongs to the physical page:
[    0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07
[    0.000000] flags: 0x1000(reserved|zone=0)
[    0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[    0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff
[    0.000000] page dumped because: kasan: bad access detected
[    0.000000]
[    0.000000] Memory state around the buggy address:
[    0.000000]  ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[    0.000000]                                            ^
[    0.000000]  ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000]  ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.000000] ==================================================================

Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode.

Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly")
Reported-by: Chathura Rajapaksha <chathura.abeyrathne.lk@gmail.com>
Link: https://lore.kernel.org/all/CAD7mqryDQCYyJ1gAmtMm8SASMWAQ4i103ptTb0f6Oda=tPY2=A@mail.gmail.com/
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230308091639.602024-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/stacktrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index 19e46f4160cc3..5ba4d23971fdb 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -89,7 +89,7 @@ void notrace walk_stackframe(struct task_struct *task,
 	while (!kstack_end(ksp)) {
 		if (__kernel_text_address(pc) && unlikely(fn(pc, arg)))
 			break;
-		pc = (*ksp++) - 0x4;
+		pc = READ_ONCE_NOCHECK(*ksp++) - 0x4;
 	}
 }
 
-- 
2.39.2

[PATCH 5.4 49/68] ext4: Fix deadlock during directory rename

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 3c92792da8506a295afb6d032b4476e46f979725 ]

As lockdep properly warns, we should not be locking i_rwsem while having
transactions started as the proper lock ordering used by all directory
handling operations is i_rwsem -> transaction start. Fix the lock
ordering by moving the locking of the directory earlier in
ext4_rename().

Reported-by: syzbot+9d16c39efb5fade84574@syzkaller.appspotmail.com
Fixes: 0813299c586b ("ext4: Fix possible corruption when moving a directory")
Link: https://syzkaller.appspot.com/bug?extid=9d16c39efb5fade84574
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230301141004.15087-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index f9d11f59df7d2..b708b437b3e36 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3795,10 +3795,20 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 			return retval;
 	}
 
+	/*
+	 * We need to protect against old.inode directory getting converted
+	 * from inline directory format into a normal one.
+	 */
+	if (S_ISDIR(old.inode->i_mode))
+		inode_lock_nested(old.inode, I_MUTEX_NONDIR2);
+
 	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de,
 				 &old.inlined);
-	if (IS_ERR(old.bh))
-		return PTR_ERR(old.bh);
+	if (IS_ERR(old.bh)) {
+		retval = PTR_ERR(old.bh);
+		goto unlock_moved_dir;
+	}
+
 	/*
 	 *  Check for inode number is _not_ due to possible IO errors.
 	 *  We might rmdir the source, keep it as pwd of some process
@@ -3855,11 +3865,6 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 			if (new.dir != old.dir && EXT4_DIR_LINK_MAX(new.dir))
 				goto end_rename;
 		}
-		/*
-		 * We need to protect against old.inode directory getting
-		 * converted from inline directory format into a normal one.
-		 */
-		inode_lock_nested(old.inode, I_MUTEX_NONDIR2);
 		retval = ext4_rename_dir_prepare(handle, &old);
 		if (retval) {
 			inode_unlock(old.inode);
@@ -3960,12 +3965,15 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 	} else {
 		ext4_journal_stop(handle);
 	}
-	if (old.dir_bh)
-		inode_unlock(old.inode);
 release_bh:
 	brelse(old.dir_bh);
 	brelse(old.bh);
 	brelse(new.bh);
+
+unlock_moved_dir:
+	if (S_ISDIR(old.inode->i_mode))
+		inode_unlock(old.inode);
+
 	return retval;
 }
 
-- 
2.39.2

[PATCH 5.4 50/68] clk: qcom: mmcc-apq8084: remove spdm clocks

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 7b347f4b677b6d84687e67d82b6b17c6f55ea2b4 ]

SPDM is used for debug/profiling and does not have any other
functionality. These clocks can safely be removed.

Suggested-by: Stephen Boyd <sboyd@kernel.org>
Suggested-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111060402.1168726-11-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/mmcc-apq8084.c | 271 --------------------------------
 1 file changed, 271 deletions(-)

diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c
index fbfcf00067394..893e5536f64c7 100644
--- a/drivers/clk/qcom/mmcc-apq8084.c
+++ b/drivers/clk/qcom/mmcc-apq8084.c
@@ -2363,262 +2363,6 @@ static struct clk_branch mmss_rbcpr_clk = {
 	},
 };
 
-static struct clk_branch mmss_spdm_ahb_clk = {
-	.halt_reg = 0x0230,
-	.clkr = {
-		.enable_reg = 0x0230,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_ahb_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_ahb_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_axi_clk = {
-	.halt_reg = 0x0210,
-	.clkr = {
-		.enable_reg = 0x0210,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_axi_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_axi_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_csi0_clk = {
-	.halt_reg = 0x023c,
-	.clkr = {
-		.enable_reg = 0x023c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_csi0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_csi0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_gfx3d_clk = {
-	.halt_reg = 0x022c,
-	.clkr = {
-		.enable_reg = 0x022c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_gfx3d_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_gfx3d_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_jpeg0_clk = {
-	.halt_reg = 0x0204,
-	.clkr = {
-		.enable_reg = 0x0204,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_jpeg0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_jpeg0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_jpeg1_clk = {
-	.halt_reg = 0x0208,
-	.clkr = {
-		.enable_reg = 0x0208,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_jpeg1_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_jpeg1_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_jpeg2_clk = {
-	.halt_reg = 0x0224,
-	.clkr = {
-		.enable_reg = 0x0224,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_jpeg2_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_jpeg2_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_mdp_clk = {
-	.halt_reg = 0x020c,
-	.clkr = {
-		.enable_reg = 0x020c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_mdp_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_mdp_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_pclk0_clk = {
-	.halt_reg = 0x0234,
-	.clkr = {
-		.enable_reg = 0x0234,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_pclk0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_pclk0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_pclk1_clk = {
-	.halt_reg = 0x0228,
-	.clkr = {
-		.enable_reg = 0x0228,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_pclk1_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_pclk1_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_vcodec0_clk = {
-	.halt_reg = 0x0214,
-	.clkr = {
-		.enable_reg = 0x0214,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_vcodec0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_vcodec0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_vfe0_clk = {
-	.halt_reg = 0x0218,
-	.clkr = {
-		.enable_reg = 0x0218,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_vfe0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_vfe0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_vfe1_clk = {
-	.halt_reg = 0x021c,
-	.clkr = {
-		.enable_reg = 0x021c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_vfe1_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_vfe1_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_rm_axi_clk = {
-	.halt_reg = 0x0304,
-	.clkr = {
-		.enable_reg = 0x0304,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_rm_axi_clk",
-			.parent_names = (const char *[]){
-				"mmss_axi_clk_src",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_rm_ocmemnoc_clk = {
-	.halt_reg = 0x0308,
-	.clkr = {
-		.enable_reg = 0x0308,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_rm_ocmemnoc_clk",
-			.parent_names = (const char *[]){
-				"ocmemnoc_clk_src",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-
 static struct clk_branch mmss_misc_ahb_clk = {
 	.halt_reg = 0x502c,
 	.clkr = {
@@ -3251,21 +2995,6 @@ static struct clk_regmap *mmcc_apq8084_clocks[] = {
 	[MDSS_VSYNC_CLK] = &mdss_vsync_clk.clkr,
 	[MMSS_RBCPR_AHB_CLK] = &mmss_rbcpr_ahb_clk.clkr,
 	[MMSS_RBCPR_CLK] = &mmss_rbcpr_clk.clkr,
-	[MMSS_SPDM_AHB_CLK] = &mmss_spdm_ahb_clk.clkr,
-	[MMSS_SPDM_AXI_CLK] = &mmss_spdm_axi_clk.clkr,
-	[MMSS_SPDM_CSI0_CLK] = &mmss_spdm_csi0_clk.clkr,
-	[MMSS_SPDM_GFX3D_CLK] = &mmss_spdm_gfx3d_clk.clkr,
-	[MMSS_SPDM_JPEG0_CLK] = &mmss_spdm_jpeg0_clk.clkr,
-	[MMSS_SPDM_JPEG1_CLK] = &mmss_spdm_jpeg1_clk.clkr,
-	[MMSS_SPDM_JPEG2_CLK] = &mmss_spdm_jpeg2_clk.clkr,
-	[MMSS_SPDM_MDP_CLK] = &mmss_spdm_mdp_clk.clkr,
-	[MMSS_SPDM_PCLK0_CLK] = &mmss_spdm_pclk0_clk.clkr,
-	[MMSS_SPDM_PCLK1_CLK] = &mmss_spdm_pclk1_clk.clkr,
-	[MMSS_SPDM_VCODEC0_CLK] = &mmss_spdm_vcodec0_clk.clkr,
-	[MMSS_SPDM_VFE0_CLK] = &mmss_spdm_vfe0_clk.clkr,
-	[MMSS_SPDM_VFE1_CLK] = &mmss_spdm_vfe1_clk.clkr,
-	[MMSS_SPDM_RM_AXI_CLK] = &mmss_spdm_rm_axi_clk.clkr,
-	[MMSS_SPDM_RM_OCMEMNOC_CLK] = &mmss_spdm_rm_ocmemnoc_clk.clkr,
 	[MMSS_MISC_AHB_CLK] = &mmss_misc_ahb_clk.clkr,
 	[MMSS_MMSSNOC_AHB_CLK] = &mmss_mmssnoc_ahb_clk.clkr,
 	[MMSS_MMSSNOC_BTO_AHB_CLK] = &mmss_mmssnoc_bto_ahb_clk.clkr,
-- 
2.39.2

[PATCH 5.4 51/68] MIPS: Fix a compilation issue

[Greg Kroah-Hartman]

From: xurui <xurui@kylinos.cn>

[ Upstream commit 109d587a4b4d7ccca2200ab1f808f43ae23e2585 ]

arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]

All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.

Signed-off-by: xurui <xurui@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mach-rc32434/pci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
index 6f40d1515580b..1ff8a987025c8 100644
--- a/arch/mips/include/asm/mach-rc32434/pci.h
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -377,7 +377,7 @@ struct pci_msu {
 				 PCI_CFG04_STAT_SSE | \
 				 PCI_CFG04_STAT_PE)
 
-#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+#define KORINA_CNFG1		(KORINA_STAT | KORINA_CMD)
 
 #define KORINA_REVID		0
 #define KORINA_CLASS_CODE	0
-- 
2.39.2

[PATCH 5.4 52/68] powerpc: Check !irq instead of irq == NO_IRQ and remove NO_IRQ

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit bab537805a10bdbf55b31324ba4a9599e0651e5e ]

NO_IRQ is a relic from the old days. It is not used anymore in core
functions. By the way, function irq_of_parse_and_map() returns value 0
on error.

In some drivers, NO_IRQ is erroneously used to check the return of
irq_of_parse_and_map().

It is not a real bug today because the only architectures using the
drivers being fixed by this patch define NO_IRQ as 0, but there are
architectures which define NO_IRQ as -1. If one day those
architectures start using the non fixed drivers, there will be a
problem.

Long time ago Linus advocated for not using NO_IRQ, see
https://lore.kernel.org/all/Pine.LNX.4.64.0511211150040.13959@g5.osdl.org

He re-iterated the same view recently in
https://lore.kernel.org/all/CAHk-=wg2Pkb9kbfbstbB91AJA2SF6cySbsgHG-iQMq56j3VTcA@mail.gmail.com

So test !irq instead of tesing irq == NO_IRQ.

All other usage of NO_IRQ for powerpc were removed in previous cycles so
the time has come to remove NO_IRQ completely for powerpc.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4b8d4f96140af01dec3a3330924dda8b2451c316.1674476798.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/irq.h    | 3 ---
 arch/powerpc/platforms/44x/fsp2.c | 2 +-
 2 files changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 814dfab7e392e..f2f952ca87c37 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -17,9 +17,6 @@
 
 extern atomic_t ppc_n_lost_interrupts;
 
-/* This number is used when no interrupt has been assigned */
-#define NO_IRQ			(0)
-
 /* Total number of virq in the platform */
 #define NR_IRQS		CONFIG_NR_IRQS
 
diff --git a/arch/powerpc/platforms/44x/fsp2.c b/arch/powerpc/platforms/44x/fsp2.c
index 823397c802def..f8bbe05d9ef29 100644
--- a/arch/powerpc/platforms/44x/fsp2.c
+++ b/arch/powerpc/platforms/44x/fsp2.c
@@ -205,7 +205,7 @@ static void node_irq_request(const char *compat, irq_handler_t errirq_handler)
 
 	for_each_compatible_node(np, NULL, compat) {
 		irq = irq_of_parse_and_map(np, 0);
-		if (irq == NO_IRQ) {
+		if (!irq) {
 			pr_err("device tree node %pOFn is missing a interrupt",
 			      np);
 			of_node_put(np);
-- 
2.39.2

[PATCH 5.4 53/68] alpha: fix R_ALPHA_LITERAL reloc for large modules

[Greg Kroah-Hartman]

From: Edward Humes <aurxenon@lunos.org>

[ Upstream commit b6b17a8b3ecd878d98d5472a9023ede9e669ca72 ]

Previously, R_ALPHA_LITERAL relocations would overflow for large kernel
modules.

This was because the Alpha's apply_relocate_add was relying on the kernel's
module loader to have sorted the GOT towards the very end of the module as it
was mapped into memory in order to correctly assign the global pointer. While
this behavior would mostly work fine for small kernel modules, this approach
would overflow on kernel modules with large GOT's since the global pointer
would be very far away from the GOT, and thus, certain entries would be out of
range.

This patch fixes this by instead using the Tru64 behavior of assigning the
global pointer to be 32KB away from the start of the GOT. The change made
in this patch won't work for multi-GOT kernel modules as it makes the
assumption the module only has one GOT located at the beginning of .got,
although for the vast majority kernel modules, this should be fine. Of the
kernel modules that would previously result in a relocation error, none of
them, even modules like nouveau, have even come close to filling up a single
GOT, and they've all worked fine under this patch.

Signed-off-by: Edward Humes <aurxenon@lunos.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/kernel/module.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index ac110ae8f9780..b19a8aae74e1f 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
-- 
2.39.2

[PATCH 5.4 54/68] macintosh: windfarm: Use unsigned type for 1-bit bitfields

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 748ea32d2dbd813d3bd958117bde5191182f909a ]

Clang warns:

  drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  lm->inited = 1;
                             ^ ~

  drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  pow->fake_volts = 1;
                                  ^ ~
  drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  pow->quadratic = 1;
                                 ^ ~

There is no bug here since no code checks the actual value of these
fields, just whether or not they are zero (boolean context), but this
can be easily fixed by switching to an unsigned type.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230215-windfarm-wsingle-bit-bitfield-constant-conversion-v1-1-26415072e855@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/macintosh/windfarm_lm75_sensor.c | 4 ++--
 drivers/macintosh/windfarm_smu_sensors.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 1e5fa09845e77..8713e80201c07 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -34,8 +34,8 @@
 #endif
 
 struct wf_lm75_sensor {
-	int			ds1775 : 1;
-	int			inited : 1;
+	unsigned int		ds1775 : 1;
+	unsigned int		inited : 1;
 	struct i2c_client	*i2c;
 	struct wf_sensor	sens;
 };
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 3e6059eaa1380..90823b4280259 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -273,8 +273,8 @@ struct smu_cpu_power_sensor {
 	struct list_head	link;
 	struct wf_sensor	*volts;
 	struct wf_sensor	*amps;
-	int			fake_volts : 1;
-	int			quadratic : 1;
+	unsigned int		fake_volts : 1;
+	unsigned int		quadratic : 1;
 	struct wf_sensor	sens;
 };
 #define to_smu_cpu_power(c) container_of(c, struct smu_cpu_power_sensor, sens)
-- 
2.39.2

[PATCH 5.4 55/68] PCI: Add SolidRun vendor ID

[Greg Kroah-Hartman]

From: Alvaro Karsz <alvaro.karsz@solid-run.com>

[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ]

Add SolidRun vendor ID to pci_ids.h

The vendor ID is used in 2 different source files, the SNET vDPA driver
and PCI quirks.

Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20230110165638.123745-2-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/pci_ids.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a31aa3ac4219f..d35000669db5a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -3106,6 +3106,8 @@
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
+#define PCI_VENDOR_ID_SOLIDRUN		0xd063
+
 #define PCI_VENDOR_ID_DIGIUM		0xd161
 #define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
 
-- 
2.39.2

[PATCH 5.4 56/68] PCI: Avoid FLR for SolidRun SNET DPU rev 1

[Greg Kroah-Hartman]

From: Alvaro Karsz <alvaro.karsz@solid-run.com>

[ Upstream commit d089d69cc1f824936eeaa4fa172f8fa1a0949eaa ]

This patch fixes a FLR bug on the SNET DPU rev 1 by setting the
PCI_DEV_FLAGS_NO_FLR_RESET flag.

As there is a quirk to avoid FLR (quirk_no_flr), I added a new quirk
to check the rev ID before calling to quirk_no_flr.

Without this patch, a SNET DPU rev 1 may hang when FLR is applied.

Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20230110165638.123745-3-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 449d4ed611a68..12bf7348abc6c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5364,6 +5364,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x7901, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
 
+/* FLR may cause the SolidRun SNET DPU (rev 0x1) to hang */
+static void quirk_no_flr_snet(struct pci_dev *dev)
+{
+	if (dev->revision == 0x1)
+		quirk_no_flr(dev);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLIDRUN, 0x1000, quirk_no_flr_snet);
+
 static void quirk_no_ext_tags(struct pci_dev *pdev)
 {
 	struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
-- 
2.39.2

[PATCH 5.4 57/68] media: ov5640: Fix analogue gain control

[Greg Kroah-Hartman]

From: Paul Elder <paul.elder@ideasonboard.com>

[ Upstream commit afa4805799c1d332980ad23339fdb07b5e0cf7e0 ]

Gain control is badly documented in publicly available (including
leaked) documentation.

There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.

There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.

The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.

One version of the datasheet indicates that the sensor supports a
digital gain:

  The OV5640 supports 1/2/4 digital gain. Normally, the gain is
  controlled automatically by the automatic gain control (AGC) block.

It isn't clear how that would be controlled manually.

There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as

  0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
  fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain

  If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
  gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
  gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
  0x70 is 4x gain

(The second part of the text makes little sense)

"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.

The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.

If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov5640.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index be6c882dd1d54..087fb464ffc12 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2704,7 +2704,7 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 	/* Auto/manual gain */
 	ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
 					     0, 1, 1, 1);
-	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
+	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN,
 					0, 1023, 1, 0);
 
 	ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
-- 
2.39.2

[PATCH 5.4 58/68] ipmi/watchdog: replace atomic_add() and atomic_sub()

[Greg Kroah-Hartman]

From: Yejune Deng <yejune.deng@gmail.com>

commit a01a89b1db1066a6af23ae08b9a0c345b7966f0b upstream.

atomic_inc() and atomic_dec() looks better

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Message-Id: <1605511807-7135-1-git-send-email-yejune.deng@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/ipmi/ipmi_watchdog.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -498,7 +498,7 @@ static void panic_halt_ipmi_heartbeat(vo
 	msg.cmd = IPMI_WDOG_RESET_TIMER;
 	msg.data = NULL;
 	msg.data_len = 0;
-	atomic_add(1, &panic_done_count);
+	atomic_inc(&panic_done_count);
 	rv = ipmi_request_supply_msgs(watchdog_user,
 				      (struct ipmi_addr *) &addr,
 				      0,
@@ -508,7 +508,7 @@ static void panic_halt_ipmi_heartbeat(vo
 				      &panic_halt_heartbeat_recv_msg,
 				      1);
 	if (rv)
-		atomic_sub(1, &panic_done_count);
+		atomic_dec(&panic_done_count);
 }
 
 static struct ipmi_smi_msg panic_halt_smi_msg = {
@@ -532,12 +532,12 @@ static void panic_halt_ipmi_set_timeout(
 	/* Wait for the messages to be free. */
 	while (atomic_read(&panic_done_count) != 0)
 		ipmi_poll_interface(watchdog_user);
-	atomic_add(1, &panic_done_count);
+	atomic_inc(&panic_done_count);
 	rv = __ipmi_set_timeout(&panic_halt_smi_msg,
 				&panic_halt_recv_msg,
 				&send_heartbeat_now);
 	if (rv) {
-		atomic_sub(1, &panic_done_count);
+		atomic_dec(&panic_done_count);
 		pr_warn("Unable to extend the watchdog timeout\n");
 	} else {
 		if (send_heartbeat_now)

[PATCH 5.4 59/68] ipmi:watchdog: Set panic count to proper value on a panic

[Greg Kroah-Hartman]

From: Corey Minyard <cminyard@mvista.com>

commit db05ddf7f321634c5659a0cf7ea56594e22365f7 upstream.

You will get two decrements when the messages on a panic are sent, not
one, since commit 2033f6858970 ("ipmi: Free receive messages when in an
oops") was added, but the watchdog code had a bug where it didn't set
the value properly.

Reported-by: Anton Lundin <glance@acc.umu.se>
Cc: <Stable@vger.kernel.org> # v5.4+
Fixes: 2033f6858970 ("ipmi: Free receive messages when in an oops")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/ipmi/ipmi_watchdog.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -498,7 +498,7 @@ static void panic_halt_ipmi_heartbeat(vo
 	msg.cmd = IPMI_WDOG_RESET_TIMER;
 	msg.data = NULL;
 	msg.data_len = 0;
-	atomic_inc(&panic_done_count);
+	atomic_add(2, &panic_done_count);
 	rv = ipmi_request_supply_msgs(watchdog_user,
 				      (struct ipmi_addr *) &addr,
 				      0,
@@ -508,7 +508,7 @@ static void panic_halt_ipmi_heartbeat(vo
 				      &panic_halt_heartbeat_recv_msg,
 				      1);
 	if (rv)
-		atomic_dec(&panic_done_count);
+		atomic_sub(2, &panic_done_count);
 }
 
 static struct ipmi_smi_msg panic_halt_smi_msg = {
@@ -532,12 +532,12 @@ static void panic_halt_ipmi_set_timeout(
 	/* Wait for the messages to be free. */
 	while (atomic_read(&panic_done_count) != 0)
 		ipmi_poll_interface(watchdog_user);
-	atomic_inc(&panic_done_count);
+	atomic_add(2, &panic_done_count);
 	rv = __ipmi_set_timeout(&panic_halt_smi_msg,
 				&panic_halt_recv_msg,
 				&send_heartbeat_now);
 	if (rv) {
-		atomic_dec(&panic_done_count);
+		atomic_sub(2, &panic_done_count);
 		pr_warn("Unable to extend the watchdog timeout\n");
 	} else {
 		if (send_heartbeat_now)

[PATCH 5.4 60/68] drm/i915: Dont use BAR mappings for ring buffers with LLC

[Greg Kroah-Hartman]

From: John Harrison <John.C.Harrison@Intel.com>

commit 85636167e3206c3fbd52254fc432991cc4e90194 upstream.

Direction from hardware is that ring buffers should never be mapped
via the BAR on systems with LLC. There are too many caching pitfalls
due to the way BAR accesses are routed. So it is safest to just not
use it.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com
(cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/gt/intel_ringbuffer.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/gt/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/gt/intel_ringbuffer.c
@@ -1208,7 +1208,7 @@ int intel_ring_pin(struct intel_ring *ri
 	if (unlikely(ret))
 		goto err_unpin;
 
-	if (i915_vma_is_map_and_fenceable(vma))
+	if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915))
 		addr = (void __force *)i915_vma_pin_iomap(vma);
 	else
 		addr = i915_gem_object_pin_map(vma->obj,
@@ -1252,7 +1252,7 @@ void intel_ring_unpin(struct intel_ring
 	intel_ring_reset(ring, ring->emit);
 
 	i915_vma_unset_ggtt_write(vma);
-	if (i915_vma_is_map_and_fenceable(vma))
+	if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915))
 		i915_vma_unpin_iomap(vma);
 	else
 		i915_gem_object_unpin_map(vma->obj);

[PATCH 5.4 61/68] x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS

[Greg Kroah-Hartman]

From: "H.J. Lu" <hjl.tools@gmail.com>

commit 84d5f77fc2ee4e010c2c037750e32f06e55224b0 upstream.

In the x86 kernel, .exit.text and .exit.data sections are discarded at
runtime, not by the linker. Add RUNTIME_DISCARD_EXIT to generic DISCARDS
and define it in the x86 kernel linker script to keep them.

The sections are added before the DISCARD directive so document here
only the situation explicitly as this change doesn't have any effect on
the generated kernel. Also, other architectures like ARM64 will use it
too so generalize the approach with the RUNTIME_DISCARD_EXIT define.

 [ bp: Massage and extend commit message. ]

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200326193021.255002-1-hjl.tools@gmail.com
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
---
 arch/x86/kernel/vmlinux.lds.S     |    2 ++
 include/asm-generic/vmlinux.lds.h |   11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -21,6 +21,8 @@
 #define LOAD_OFFSET __START_KERNEL_map
 #endif
 
+#define RUNTIME_DISCARD_EXIT
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -900,10 +900,17 @@
  * section definitions so that such archs put those in earlier section
  * definitions.
  */
+#ifdef RUNTIME_DISCARD_EXIT
+#define EXIT_DISCARDS
+#else
+#define EXIT_DISCARDS							\
+	EXIT_TEXT							\
+	EXIT_DATA
+#endif
+
 #define DISCARDS							\
 	/DISCARD/ : {							\
-	EXIT_TEXT							\
-	EXIT_DATA							\
+	EXIT_DISCARDS							\
 	EXIT_CALL							\
 	*(.discard)							\
 	*(.discard.*)							\

[PATCH 5.4 62/68] arch: fix broken BuildID for arm64 and riscv

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 99cb0d917ffa1ab628bb67364ca9b162c07699b1 upstream.

Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").

The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.

Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.

While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.

Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.

Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
[Tom: stable backport 5.15.y, 5.10.y, 5.4.y]

Though the above "Fixes:" commits are not in this kernel, the conditions
which lead to a missing Build ID in arm64 vmlinux are similar.

Evidence points to these conditions:
1. ld version > 2.36 (exact binutils commit documented in a494398bde27)
2. first object which gets linked (head.o) has a PROGBITS .note.GNU-stack segment

These conditions can be observed when:
- 5.15.60+ OR 5.10.136+ OR 5.4.210+
- AND ld version > 2.36
- AND arch=arm64
- AND CONFIG_MODVERSIONS=y

There are notable differences in the vmlinux elf files produced
before(bad) and after(good) applying this series.

Good: p_type:PT_NOTE segment exists.
 Bad: p_type:PT_NOTE segment is missing.

Good: sh_name_str:.notes section has sh_type:SHT_NOTE
 Bad: sh_name_str:.notes section has sh_type:SHT_PROGBITS

`readelf -n` (as of v2.40) searches for Build Id
by processing only the very first note in sh_type:SHT_NOTE sections.

This was previously bisected to the stable backport of 0d362be5b142.
Follow-up experiments were discussed here: https://lore.kernel.org/all/20221221235413.xaisboqmr7dkqwn6@oracle.com/
which strongly hints at condition 2.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/asm-generic/vmlinux.lds.h |    5 +++++
 1 file changed, 5 insertions(+)

--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -825,7 +825,12 @@
 #define TRACEDATA
 #endif
 
+/*
+ * Discard .note.GNU-stack, which is emitted as PROGBITS by the compiler.
+ * Otherwise, the type of .notes section would become PROGBITS instead of NOTES.
+ */
 #define NOTES								\
+	/DISCARD/ : { *(.note.GNU-stack) }				\
 	.notes : AT(ADDR(.notes) - LOAD_OFFSET) {			\
 		__start_notes = .;					\
 		KEEP(*(.note.*))					\

[PATCH 5.4 63/68] powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 4b9880dbf3bdba3a7c56445137c3d0e30aaa0a40 upstream.

The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.

That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.

However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:

  '.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
  discarded section '.exit.text' of crypto/algboss.o
  '.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
  discarded section '.exit.text' of drivers/nvdimm/core.o

Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.

1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/vmlinux.lds.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #endif
 
 #define BSS_FIRST_SECTIONS *(.bss.prominit)
+#define RUNTIME_DISCARD_EXIT
 
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>

[PATCH 5.4 64/68] powerpc/vmlinux.lds: Dont discard .rela* for relocatable builds

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 07b050f9290ee012a407a0f64151db902a1520f5 upstream.

Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).

However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.

However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:

  ld: warning: discarding dynamic section .rela.init.rodata

Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/vmlinux.lds.S |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -395,9 +395,12 @@ SECTIONS
 	DISCARDS
 	/DISCARD/ : {
 		*(*.EMB.apuinfo)
-		*(.glink .iplt .plt .rela* .comment)
+		*(.glink .iplt .plt .comment)
 		*(.gnu.version*)
 		*(.gnu.attributes)
 		*(.eh_frame)
+#ifndef CONFIG_RELOCATABLE
+		*(.rela*)
+#endif
 	}
 }

[PATCH 5.4 65/68] s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit a494398bde273143c2352dd373cad8211f7d94b2 upstream.

Nathan Chancellor reports that the s390 vmlinux fails to link with
GNU ld < 2.36 since commit 99cb0d917ffa ("arch: fix broken BuildID
for arm64 and riscv").

It happens for defconfig, or more specifically for CONFIG_EXPOLINE=y.

  $ s390x-linux-gnu-ld --version | head -n1
  GNU ld (GNU Binutils for Debian) 2.35.2
  $ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- allnoconfig
  $ ./scripts/config -e CONFIG_EXPOLINE
  $ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- olddefconfig
  $ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu-
  `.exit.text' referenced in section `.s390_return_reg' of drivers/base/dd.o: defined in discarded section `.exit.text' of drivers/base/dd.o
  make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
  make: *** [Makefile:1252: vmlinux] Error 2

arch/s390/kernel/vmlinux.lds.S wants to keep EXIT_TEXT:

        .exit.text : {
                EXIT_TEXT
        }

But, at the same time, EXIT_TEXT is thrown away by DISCARD because
s390 does not define RUNTIME_DISCARD_EXIT.

I still do not understand why the latter wins after 99cb0d917ffa,
but defining RUNTIME_DISCARD_EXIT seems correct because the comment
line in arch/s390/kernel/vmlinux.lds.S says:

        /*
         * .exit.text is discarded at runtime, not link time,
         * to deal with references from __bug_table
         */

Nathan also found that binutils commit 21401fc7bf67 ("Duplicate output
sections in scripts") cured this issue, so we cannot reproduce it with
binutils 2.36+, but it is better to not rely on it.

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230105031306.1455409-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kernel/vmlinux.lds.S |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -15,6 +15,8 @@
 /* Handle ro_after_init data on our own. */
 #define RO_AFTER_INIT_DATA
 
+#define RUNTIME_DISCARD_EXIT
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/vmlinux.lds.h>
 

[PATCH 5.4 66/68] sh: define RUNTIME_DISCARD_EXIT

[Greg Kroah-Hartman]

From: Tom Saeger <tom.saeger@oracle.com>

commit c1c551bebf928889e7a8fef7415b44f9a64975f4 upstream.

sh vmlinux fails to link with GNU ld < 2.40 (likely < 2.36) since
commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv").

This is similar to fixes for powerpc and s390:
commit 4b9880dbf3bd ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT").
commit a494398bde27 ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36").

  $ sh4-linux-gnu-ld --version | head -n1
  GNU ld (GNU Binutils for Debian) 2.35.2

  $ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu- microdev_defconfig
  $ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu-

  `.exit.text' referenced in section `__bug_table' of crypto/algboss.o:
  defined in discarded section `.exit.text' of crypto/algboss.o
  `.exit.text' referenced in section `__bug_table' of
  drivers/char/hw_random/core.o: defined in discarded section
  `.exit.text' of drivers/char/hw_random/core.o
  make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
  make[1]: *** [Makefile:1252: vmlinux] Error 2

arch/sh/kernel/vmlinux.lds.S keeps EXIT_TEXT:

	/*
	 * .exit.text is discarded at runtime, not link time, to deal with
	 * references from __bug_table
	 */
	.exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }

However, EXIT_TEXT is thrown away by
DISCARD(include/asm-generic/vmlinux.lds.h) because
sh does not define RUNTIME_DISCARD_EXIT.

GNU ld 2.40 does not have this issue and builds fine.
This corresponds with Masahiro's comments in a494398bde27:
"Nathan [Chancellor] also found that binutils
commit 21401fc7bf67 ("Duplicate output sections in scripts") cured this
issue, so we cannot reproduce it with binutils 2.36+, but it is better
to not rely on it."

Link: https://lkml.kernel.org/r/9166a8abdc0f979e50377e61780a4bba1dfa2f52.1674518464.git.tom.saeger@oracle.com
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/20230123194218.47ssfzhrpnv3xfez@oracle.com/
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dennis Gilmore <dennis@ausil.us>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sh/kernel/vmlinux.lds.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -10,6 +10,7 @@ OUTPUT_ARCH(sh:sh5)
 #define LOAD_OFFSET	0
 OUTPUT_ARCH(sh)
 #endif
+#define RUNTIME_DISCARD_EXIT
 
 #include <asm/thread_info.h>
 #include <asm/cache.h>

[PATCH 5.4 67/68] UML: define RUNTIME_DISCARD_EXIT

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit b99ddbe8336ee680257c8ab479f75051eaa49dcf upstream.

With CONFIG_VIRTIO_UML=y, GNU ld < 2.36 fails to link UML vmlinux
(w/wo CONFIG_LD_SCRIPT_STATIC).

  `.exit.text' referenced in section `.uml.exitcall.exit' of arch/um/drivers/virtio_uml.o: defined in discarded section `.exit.text' of arch/um/drivers/virtio_uml.o
  collect2: error: ld returned 1 exit status

This fix is similar to the following commits:

- 4b9880dbf3bd ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT")
- a494398bde27 ("s390: define RUNTIME_DISCARD_EXIT to fix link error
  with GNU ld < 2.36")
- c1c551bebf92 ("sh: define RUNTIME_DISCARD_EXIT")

Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/um/kernel/vmlinux.lds.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/um/kernel/vmlinux.lds.S
+++ b/arch/um/kernel/vmlinux.lds.S
@@ -1,4 +1,4 @@
-
+#define RUNTIME_DISCARD_EXIT
 KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER);
 
 #ifdef CONFIG_LD_SCRIPT_STATIC

[PATCH 5.4 68/68] s390/dasd: add missing discipline function

[Greg Kroah-Hartman]

From: Stefan Haberland <sth@linux.ibm.com>

commit c0c8a8397fa8a74d04915f4d3d28cb4a5d401427 upstream.

Fix crash with illegal operation exception in dasd_device_tasklet.
Commit b72949328869 ("s390/dasd: Prepare for additional path event handling")
renamed the verify_path function for ECKD but not for FBA and DIAG.
This leads to a panic when the path verification function is called for a
FBA or DIAG device.

Fix by defining a wrapper function for dasd_generic_verify_path().

Fixes: b72949328869 ("s390/dasd: Prepare for additional path event handling")
Cc: <stable@vger.kernel.org> #5.11
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20210525125006.157531-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/block/dasd_diag.c |    7 ++++++-
 drivers/s390/block/dasd_fba.c  |    7 ++++++-
 drivers/s390/block/dasd_int.h  |    1 -
 3 files changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -644,12 +644,17 @@ static void dasd_diag_setup_blk_queue(st
 	blk_queue_segment_boundary(q, PAGE_SIZE - 1);
 }
 
+static int dasd_diag_pe_handler(struct dasd_device *device, __u8 tbvpm)
+{
+	return dasd_generic_verify_path(device, tbvpm);
+}
+
 static struct dasd_discipline dasd_diag_discipline = {
 	.owner = THIS_MODULE,
 	.name = "DIAG",
 	.ebcname = "DIAG",
 	.check_device = dasd_diag_check_device,
-	.verify_path = dasd_generic_verify_path,
+	.pe_handler = dasd_diag_pe_handler,
 	.fill_geometry = dasd_diag_fill_geometry,
 	.setup_blk_queue = dasd_diag_setup_blk_queue,
 	.start_IO = dasd_start_diag,
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -803,13 +803,18 @@ static void dasd_fba_setup_blk_queue(str
 	blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
 }
 
+static int dasd_fba_pe_handler(struct dasd_device *device, __u8 tbvpm)
+{
+	return dasd_generic_verify_path(device, tbvpm);
+}
+
 static struct dasd_discipline dasd_fba_discipline = {
 	.owner = THIS_MODULE,
 	.name = "FBA ",
 	.ebcname = "FBA ",
 	.check_device = dasd_fba_check_characteristics,
 	.do_analysis = dasd_fba_do_analysis,
-	.verify_path = dasd_generic_verify_path,
+	.pe_handler = dasd_fba_pe_handler,
 	.setup_blk_queue = dasd_fba_setup_blk_queue,
 	.fill_geometry = dasd_fba_fill_geometry,
 	.start_IO = dasd_start_IO,
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -298,7 +298,6 @@ struct dasd_discipline {
 	 * e.g. verify that new path is compatible with the current
 	 * configuration.
 	 */
-	int (*verify_path)(struct dasd_device *, __u8);
 	int (*pe_handler)(struct dasd_device *, __u8);
 
 	/*

Re: [PATCH 5.4 52/68] powerpc: Check !irq instead of irq == NO_IRQ and remove NO_IRQ

[Christophe Leroy]

Le 15/03/2023 à 13:12, Greg Kroah-Hartman a écrit :
> From: Christophe Leroy <christophe.leroy@csgroup.eu>
> 
> [ Upstream commit bab537805a10bdbf55b31324ba4a9599e0651e5e ]
> 
> NO_IRQ is a relic from the old days. It is not used anymore in core
> functions. By the way, function irq_of_parse_and_map() returns value 0
> on error.
> 
> In some drivers, NO_IRQ is erroneously used to check the return of
> irq_of_parse_and_map().
> 
> It is not a real bug today because the only architectures using the
> drivers being fixed by this patch define NO_IRQ as 0, but there are
> architectures which define NO_IRQ as -1. If one day those
> architectures start using the non fixed drivers, there will be a
> problem.
> 
> Long time ago Linus advocated for not using NO_IRQ, see
> https://lore.kernel.org/all/Pine.LNX.4.64.0511211150040.13959@g5.osdl.org
> 
> He re-iterated the same view recently in
> https://lore.kernel.org/all/CAHk-=wg2Pkb9kbfbstbB91AJA2SF6cySbsgHG-iQMq56j3VTcA@mail.gmail.com
> 
> So test !irq instead of tesing irq == NO_IRQ.
> 
> All other usage of NO_IRQ for powerpc were removed in previous cycles so
> the time has come to remove NO_IRQ completely for powerpc.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> Link: https://lore.kernel.org/r/4b8d4f96140af01dec3a3330924dda8b2451c316.1674476798.git.christophe.leroy@csgroup.eu
> Signed-off-by: Sasha Levin <sashal@kernel.org>

You can't remove NO_IRQ macro without first all preparation patches 
merged during the 6.2 cycle.

Christophe


> ---
>   arch/powerpc/include/asm/irq.h    | 3 ---
>   arch/powerpc/platforms/44x/fsp2.c | 2 +-
>   2 files changed, 1 insertion(+), 4 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
> index 814dfab7e392e..f2f952ca87c37 100644
> --- a/arch/powerpc/include/asm/irq.h
> +++ b/arch/powerpc/include/asm/irq.h
> @@ -17,9 +17,6 @@
>   
>   extern atomic_t ppc_n_lost_interrupts;
>   
> -/* This number is used when no interrupt has been assigned */
> -#define NO_IRQ			(0)
> -
>   /* Total number of virq in the platform */
>   #define NR_IRQS		CONFIG_NR_IRQS
>   
> diff --git a/arch/powerpc/platforms/44x/fsp2.c b/arch/powerpc/platforms/44x/fsp2.c
> index 823397c802def..f8bbe05d9ef29 100644
> --- a/arch/powerpc/platforms/44x/fsp2.c
> +++ b/arch/powerpc/platforms/44x/fsp2.c
> @@ -205,7 +205,7 @@ static void node_irq_request(const char *compat, irq_handler_t errirq_handler)
>   
>   	for_each_compatible_node(np, NULL, compat) {
>   		irq = irq_of_parse_and_map(np, 0);
> -		if (irq == NO_IRQ) {
> +		if (!irq) {
>   			pr_err("device tree node %pOFn is missing a interrupt",
>   			      np);
>   			of_node_put(np);

RE: [PATCH 5.4 00/68] 5.4.237-rc1 review

[Chris Paterson]

Hello Greg,

> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: 15 March 2023 12:12
> 
> This is the start of the stable review cycle for the 5.4.237 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
> Anything received after that time might be too late.

Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
CI Pipeline:  https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/807195748

We (CIP) are seeing some build issues with Linux 5.4.237-rc1 (543ff97e810c).

1)
For arm multi_v7_defconfig builds we're seeing a some errors when building the exynos5422 device trees:
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to non-existent node or label "gpu"
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to non-existent node or label "gpu"
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidxu3-lite.dtb] Error 2
make[1]: *** Waiting for unfinished jobs....
arch/arm/boot/dts/exynos5422-odroidhc1.dts:238.10-241.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map0: Reference to non-existent node or label "gpu"
arch/arm/boot/dts/exynos5422-odroidhc1.dts:242.10-245.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map1: Reference to non-existent node or label "gpu"
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidhc1.dtb] Error 2
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to non-existent node or label "gpu"
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to non-existent node or label "gpu"
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidxu3.dtb] Error 2
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to non-existent node or label "gpu"
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to non-existent node or label "gpu"
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidxu4.dtb] Error 2

Log: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/3939400038#L8368

Presumably caused by "ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1", but I haven't had a chance to revert and re-test.

Kind regards, Chris

Re: [PATCH 5.4 00/68] 5.4.237-rc1 review

[Daniel Díaz]

Hello!

On 15/03/23 06:11, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.237 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.237-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Lots of build failures: arm, arm64 (Clang-16, Clang-nightly):

-----8<-----
/builds/linux/drivers/gpu/drm/drm_edid.c:5119:21: error: passing 'const struct drm_connector *' to parameter of type 'struct drm_connector *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
         if (!is_hdmi2_sink(connector) && vic > 64)
                            ^~~~~~~~~
/builds/linux/drivers/gpu/drm/drm_edid.c:4994:49: note: passing argument to parameter 'connector' here
static bool is_hdmi2_sink(struct drm_connector *connector)
                                                 ^
1 error generated.
make[4]: *** [/builds/linux/scripts/Makefile.build:262: drivers/gpu/drm/drm_edid.o] Error 1
----->8-----


On PowerPC (GCC-8, GCC-12, Clang-16, Clang-nightly):

-----8-----
In file included from /builds/linux/drivers/usb/host/ohci-hcd.c:1255:
/builds/linux/drivers/usb/host/ohci-ppc-of.c:126:13: error: use of undeclared identifier 'NO_IRQ'; did you mean 'do_IRQ'?
         if (irq == NO_IRQ) {
                    ^~~~~~
                    do_IRQ
/builds/linux/arch/powerpc/include/asm/irq.h:58:13: note: 'do_IRQ' declared here
extern void do_IRQ(struct pt_regs *regs);
             ^
1 error generated.
make[4]: *** [/builds/linux/scripts/Makefile.build:262: drivers/usb/host/ohci-hcd.o] Error 1
----->8-----


Many Arm configs:

-----8<-----
/builds/linux/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to
  non-existent node or label "gpu"

/builds/linux/arch/arm/boot/dts/exynos5422-odroidhc1.dts:238.10-241.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map0: Reference to non-exi
stent node or label "gpu"

/builds/linux/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to
  non-existent node or label "gpu"

/builds/linux/arch/arm/boot/dts/exynos5422-odroidhc1.dts:242.10-245.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map1: Reference to non-exi
stent node or label "gpu"

ERROR: Input tree has errors, aborting (use -f to force output)
----->8-----


Greetings!

Daniel Díaz
daniel.diaz@linaro.org

Re: [PATCH 5.4 00/68] 5.4.237-rc1 review

[Florian Fainelli]

On 3/15/23 05:11, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.237 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.237-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/68] 5.4.237-rc1 review

[Shuah Khan]

On 3/15/23 06:11, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.237 release.
> There are 68 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.237-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/68] 5.4.237-rc1 review

[Greg Kroah-Hartman]

On Wed, Mar 15, 2023 at 02:27:28PM +0000, Chris Paterson wrote:
> Hello Greg,
> 
> > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Sent: 15 March 2023 12:12
> > 
> > This is the start of the stable review cycle for the 5.4.237 release.
> > There are 68 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
> > Anything received after that time might be too late.
> 
> Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
> CI Pipeline:  https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/807195748
> 
> We (CIP) are seeing some build issues with Linux 5.4.237-rc1 (543ff97e810c).
> 
> 1)
> For arm multi_v7_defconfig builds we're seeing a some errors when building the exynos5422 device trees:
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to non-existent node or label "gpu"
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to non-existent node or label "gpu"
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidxu3-lite.dtb] Error 2
> make[1]: *** Waiting for unfinished jobs....
> arch/arm/boot/dts/exynos5422-odroidhc1.dts:238.10-241.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map0: Reference to non-existent node or label "gpu"
> arch/arm/boot/dts/exynos5422-odroidhc1.dts:242.10-245.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map1: Reference to non-existent node or label "gpu"
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidhc1.dtb] Error 2
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to non-existent node or label "gpu"
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to non-existent node or label "gpu"
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidxu3.dtb] Error 2
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:409.10-412.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map3: Reference to non-existent node or label "gpu"
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi:413.10-416.7: ERROR (phandle_references): /thermal-zones/gpu-thermal/cooling-maps/map4: Reference to non-existent node or label "gpu"
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/exynos5422-odroidxu4.dtb] Error 2
> 
> Log: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/3939400038#L8368
> 
> Presumably caused by "ARM: dts: exynos: Add GPU thermal zone cooling maps for Odroid XU3/XU4/HC1", but I haven't had a chance to revert and re-test.

Should now be fixed up for -rc2, thanks.

greg k-h

Re: [PATCH 5.4 00/68] 5.4.237-rc1 review

[Greg Kroah-Hartman]

On Wed, Mar 15, 2023 at 08:59:42AM -0600, Daniel Díaz wrote:
> Hello!
> 
> On 15/03/23 06:11, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.237 release.
> > There are 68 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri, 17 Mar 2023 11:57:10 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.237-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> Lots of build failures: arm, arm64 (Clang-16, Clang-nightly):
> 
> -----8<-----
> /builds/linux/drivers/gpu/drm/drm_edid.c:5119:21: error: passing 'const struct drm_connector *' to parameter of type 'struct drm_connector *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
>         if (!is_hdmi2_sink(connector) && vic > 64)
>                            ^~~~~~~~~
> /builds/linux/drivers/gpu/drm/drm_edid.c:4994:49: note: passing argument to parameter 'connector' here
> static bool is_hdmi2_sink(struct drm_connector *connector)
>                                                 ^
> 1 error generated.
> make[4]: *** [/builds/linux/scripts/Makefile.build:262: drivers/gpu/drm/drm_edid.o] Error 1
> ----->8-----

Odd this didn't show up on my builds.  Anyway, now dropped, thanks!

greg k-h

Re: [PATCH 5.4 02/68] x86/CPU/AMD: Disable XSAVES on AMD family 0x17

[Maciej S. Szmigiero]

On 15.03.2023 13:11, Greg Kroah-Hartman wrote:
> From: Andrew Cooper <andrew.cooper3@citrix.com>
> 
> commit b0563468eeac88ebc70559d52a0b66efc37e4e9d upstream.
> 
> AMD Erratum 1386 is summarised as:
> 
>    XSAVES Instruction May Fail to Save XMM Registers to the Provided
>    State Save Area
> 
> This piece of accidental chronomancy causes the %xmm registers to
> occasionally reset back to an older value.
> 
> Ignore the XSAVES feature on all AMD Zen1/2 hardware.  The XSAVEC
> instruction (which works fine) is equivalent on affected parts.
> 
>    [ bp: Typos, move it into the F17h-specific function. ]
> 
> Reported-by: Tavis Ormandy <taviso@gmail.com>
> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
> Cc: <stable@kernel.org>
> Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>   arch/x86/kernel/cpu/amd.c |    9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> --- a/arch/x86/kernel/cpu/amd.c
> +++ b/arch/x86/kernel/cpu/amd.c
> @@ -205,6 +205,15 @@ static void init_amd_k6(struct cpuinfo_x
>   		return;
>   	}
>   #endif
> +	/*
> +	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
> +	 * certain circumstances on Zen1/2 uarch, and not all parts have had
> +	 * updated microcode at the time of writing (March 2023).
> +	 *
> +	 * Affected parts all have no supervisor XSAVE states, meaning that
> +	 * the XSAVEC instruction (which works fine) is equivalent.
> +	 */
> +	clear_cpu_cap(c, X86_FEATURE_XSAVES);
>   }

This is essentially a well-intended NOP since K6 well predates XSAVES,
and init_amd_k6() is *not* called for Zen CPUs.

This workaround should have been added to init_amd_zn() function
instead.

4.19 and 4.14 backports of this patch have the same problem.

Thanks,
Maciej

Re: [PATCH 5.4 02/68] x86/CPU/AMD: Disable XSAVES on AMD family 0x17

[Greg Kroah-Hartman]

On Fri, Oct 20, 2023 at 11:41:13AM +0200, Maciej S. Szmigiero wrote:
> On 15.03.2023 13:11, Greg Kroah-Hartman wrote:
> > From: Andrew Cooper <andrew.cooper3@citrix.com>
> > 
> > commit b0563468eeac88ebc70559d52a0b66efc37e4e9d upstream.
> > 
> > AMD Erratum 1386 is summarised as:
> > 
> >    XSAVES Instruction May Fail to Save XMM Registers to the Provided
> >    State Save Area
> > 
> > This piece of accidental chronomancy causes the %xmm registers to
> > occasionally reset back to an older value.
> > 
> > Ignore the XSAVES feature on all AMD Zen1/2 hardware.  The XSAVEC
> > instruction (which works fine) is equivalent on affected parts.
> > 
> >    [ bp: Typos, move it into the F17h-specific function. ]
> > 
> > Reported-by: Tavis Ormandy <taviso@gmail.com>
> > Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
> > Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
> > Cc: <stable@kernel.org>
> > Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >   arch/x86/kernel/cpu/amd.c |    9 +++++++++
> >   1 file changed, 9 insertions(+)
> > 
> > --- a/arch/x86/kernel/cpu/amd.c
> > +++ b/arch/x86/kernel/cpu/amd.c
> > @@ -205,6 +205,15 @@ static void init_amd_k6(struct cpuinfo_x
> >   		return;
> >   	}
> >   #endif
> > +	/*
> > +	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
> > +	 * certain circumstances on Zen1/2 uarch, and not all parts have had
> > +	 * updated microcode at the time of writing (March 2023).
> > +	 *
> > +	 * Affected parts all have no supervisor XSAVE states, meaning that
> > +	 * the XSAVEC instruction (which works fine) is equivalent.
> > +	 */
> > +	clear_cpu_cap(c, X86_FEATURE_XSAVES);
> >   }
> 
> This is essentially a well-intended NOP since K6 well predates XSAVES,
> and init_amd_k6() is *not* called for Zen CPUs.
> 
> This workaround should have been added to init_amd_zn() function
> instead.
> 
> 4.19 and 4.14 backports of this patch have the same problem.

Ick, good catch!  Can you send a set of patches to fix this up?

thanks,

greg k-h

Re: [PATCH 5.4 02/68] x86/CPU/AMD: Disable XSAVES on AMD family 0x17

[Maciej S. Szmigiero]

On 20.10.2023 15:17, Greg Kroah-Hartman wrote:
> On Fri, Oct 20, 2023 at 11:41:13AM +0200, Maciej S. Szmigiero wrote:
>> On 15.03.2023 13:11, Greg Kroah-Hartman wrote:
>>> From: Andrew Cooper <andrew.cooper3@citrix.com>
>>>
>>> commit b0563468eeac88ebc70559d52a0b66efc37e4e9d upstream.
>>>
>>> AMD Erratum 1386 is summarised as:
>>>
>>>     XSAVES Instruction May Fail to Save XMM Registers to the Provided
>>>     State Save Area
>>>
>>> This piece of accidental chronomancy causes the %xmm registers to
>>> occasionally reset back to an older value.
>>>
>>> Ignore the XSAVES feature on all AMD Zen1/2 hardware.  The XSAVEC
>>> instruction (which works fine) is equivalent on affected parts.
>>>
>>>     [ bp: Typos, move it into the F17h-specific function. ]
>>>
>>> Reported-by: Tavis Ormandy <taviso@gmail.com>
>>> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
>>> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
>>> Cc: <stable@kernel.org>
>>> Link: https://lore.kernel.org/r/20230307174643.1240184-1-andrew.cooper3@citrix.com
>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>> ---
>>>    arch/x86/kernel/cpu/amd.c |    9 +++++++++
>>>    1 file changed, 9 insertions(+)
>>>
>>> --- a/arch/x86/kernel/cpu/amd.c
>>> +++ b/arch/x86/kernel/cpu/amd.c
>>> @@ -205,6 +205,15 @@ static void init_amd_k6(struct cpuinfo_x
>>>    		return;
>>>    	}
>>>    #endif
>>> +	/*
>>> +	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
>>> +	 * certain circumstances on Zen1/2 uarch, and not all parts have had
>>> +	 * updated microcode at the time of writing (March 2023).
>>> +	 *
>>> +	 * Affected parts all have no supervisor XSAVE states, meaning that
>>> +	 * the XSAVEC instruction (which works fine) is equivalent.
>>> +	 */
>>> +	clear_cpu_cap(c, X86_FEATURE_XSAVES);
>>>    }
>>
>> This is essentially a well-intended NOP since K6 well predates XSAVES,
>> and init_amd_k6() is *not* called for Zen CPUs.
>>
>> This workaround should have been added to init_amd_zn() function
>> instead.
>>
>> 4.19 and 4.14 backports of this patch have the same problem.
> 
> Ick, good catch!  Can you send a set of patches to fix this up?

I can add this to my TODO list, but unfortunately can't promise
a short ETA at this point.

> thanks,
> 
> greg k-h

Thanks,
Maciej