* [PATCH 6.6 000/158] 6.6.29-rc1 review
@ 2024-04-23 21:37 Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 001/158] smb: client: remove extra @chan_count check in __cifs_put_smb_ses() Greg Kroah-Hartman
` (166 more replies)
0 siblings, 167 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, broonie
This is the start of the stable review cycle for the 6.6.29 release.
There are 158 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 6.6.29-rc1
Johan Hovold <johan+linaro@kernel.org>
PCI/ASPM: Fix deadlock when enabling ASPM
Namjae Jeon <linkinjeon@kernel.org>
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
Marios Makassikis <mmakassikis@freebox.fr>
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
Namjae Jeon <linkinjeon@kernel.org>
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
Namjae Jeon <linkinjeon@kernel.org>
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
Naveen N Rao <naveen@kernel.org>
powerpc/ftrace: Ignore ftrace locations in exit text sections
Breno Leitao <leitao@debian.org>
virtio_net: Do not send RSS key if it is not supported
Arınç ÜNAL <arinc.unal@arinc9.com>
net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
Arınç ÜNAL <arinc.unal@arinc9.com>
net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
Jeongjun Park <aha310510@gmail.com>
nilfs2: fix OOB in nilfs_set_de_type
Qiang Zhang <qiang4.zhang@intel.com>
bootconfig: use memblock_free_late to free xbc memory to buddy
Dave Airlie <airlied@redhat.com>
nouveau: fix instmem race condition around ptr stores
Zack Rusin <zack.rusin@broadcom.com>
drm/vmwgfx: Fix crtc's atomic check conditional
Zack Rusin <zack.rusin@broadcom.com>
drm/vmwgfx: Sort primary plane formats by order of preference
Zack Rusin <zack.rusin@broadcom.com>
drm/vmwgfx: Fix prime import/export
Christian König <christian.koenig@amd.com>
drm/amdgpu: remove invalid resource->start check v2
Felix Kuehling <felix.kuehling@amd.com>
drm/amdkfd: Fix memory leak in create_process failure
xinhui pan <xinhui.pan@amd.com>
drm/amdgpu: validate the parameters of bo mapping operations more clearly
Danny Lin <danny@orbstack.dev>
fuse: fix leaked ENOSYS error on first statx call
Sumanth Korikkar <sumanthk@linux.ibm.com>
mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
Miaohe Lin <linmiaohe@huawei.com>
mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
Oscar Salvador <osalvador@suse.de>
mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
Peter Xu <peterx@redhat.com>
mm/userfaultfd: allow hugetlb change protection upon poison entry
Yuntao Wang <ytcoode@gmail.com>
init/main.c: Fix potential static_command_line memory overflow
Yaxiong Tian <tianyaxiong@kylinos.cn>
arm64: hibernate: Fix level3 translation fault in swsusp_save()
Ard Biesheuvel <ardb@kernel.org>
arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
David Matlack <dmatlack@google.com>
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
Sandipan Das <sandipan.das@amd.com>
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
Sean Christopherson <seanjc@google.com>
KVM: x86/pmu: Disable support for adaptive PEBS
Sean Christopherson <seanjc@google.com>
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
sched: Add missing memory barrier in switch_mm_cid
Alan Stern <stern@rowland.harvard.edu>
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
Samuel Thibault <samuel.thibault@ens-lyon.org>
speakup: Avoid crash on very long word
Alexander Usyskin <alexander.usyskin@intel.com>
mei: me: disable RPL-S on SPS and IGN firmwares
Norihiko Hama <Norihiko.Hama@alpsalpine.com>
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
Kai-Heng Feng <kai.heng.feng@canonical.com>
usb: Disable USB3 LPM at shutdown
Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "usb: cdc-wdm: close race between read and workqueue"
Daniele Palmas <dnlplm@gmail.com>
USB: serial: option: add Telit FN920C04 rmnet compositions
Vanillan Wang <vanillanwang@163.com>
USB: serial: option: add Rolling RW101-GL and RW135-GL support
Jerry Meng <jerry-meng@foxmail.com>
USB: serial: option: support Quectel EM060K sub-models
Coia Prant <coiaprant@gmail.com>
USB: serial: option: add Lonsung U8300/U9300 product
Chuanhong Guo <gch981213@gmail.com>
USB: serial: option: add support for Fibocom FM650/FG650
bolan wang <bolan.wang@fibocom.com>
USB: serial: option: add Fibocom FM135-GL variants
Tony Lindgren <tony@atomide.com>
serial: core: Fix missing shutdown and startup for serial base port
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
serial: core: Clearing the circular buffer before NULLifying it
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
serial: stm32: Reset .throttled state in .startup()
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
Finn Thain <fthain@linux-m68k.org>
serial/pmac_zilog: Remove flawed mitigation for rx irq flood
Emil Kronborg <emil.kronborg@protonmail.com>
serial: mxs-auart: add spinlock around changing cts state
Nikita Zhandarovich <n.zhandarovich@fintech.ru>
comedi: vmk80xx: fix incomplete endpoint checking
Gil Fine <gil.fine@linux.intel.com>
thunderbolt: Fix wake configurations after device unplug
Gil Fine <gil.fine@linux.intel.com>
thunderbolt: Avoid notify PM core about runtime PM resume
Carlos Llamas <cmllamas@google.com>
binder: check offset alignment in binder_get_object()
Ai Chao <aichao@kylinos.cn>
ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
Mauro Carvalho Chehab <mchehab@kernel.org>
ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N
Shenghao Ding <shenghao-ding@ti.com>
ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1
Shenghao Ding <shenghao-ding@ti.com>
ALSA: hda/tas2781: correct the register for pow calibrated data
Takashi Iwai <tiwai@suse.de>
ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
Shay Drory <shayd@nvidia.com>
net/mlx5: E-switch, store eswitch pointer before registering devlink_param
Eric Biggers <ebiggers@google.com>
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
Josh Poimboeuf <jpoimboe@kernel.org>
x86/bugs: Fix BHI retpoline check
Pin-yen Lin <treapking@chromium.org>
clk: mediatek: Do a runtime PM get on controllers during probe
Stephen Boyd <sboyd@kernel.org>
clk: Get runtime PM before walking tree for clk_summary
Vishal Badole <badolevishal1116@gmail.com>
clk: Show active consumers of clocks in debugfs
Stephen Boyd <sboyd@kernel.org>
clk: Get runtime PM before walking tree during disable_unused
Stephen Boyd <sboyd@kernel.org>
clk: Initialize struct clk_core kref earlier
Stephen Boyd <sboyd@kernel.org>
clk: Remove prepare_lock hold assertion in __clk_release()
Mike Tipton <quic_mdtipton@quicinc.com>
interconnect: Don't access req_list while it's being manipulated
Mario Limonciello <mario.limonciello@amd.com>
platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
Hardik Gajjar <hgajjar@de.adit-jv.com>
usb: new quirk to reduce the SET_ADDRESS request timeout
Hardik Gajjar <hgajjar@de.adit-jv.com>
usb: xhci: Add timeout argument in address_device USB HCD callback
Brenton Simpson <appsforartists@google.com>
drm: panel-orientation-quirks: Add quirk for Lenovo Legion Go
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
Bjorn Helgaas <bhelgaas@google.com>
PCI/DPC: Use FIELD_GET()
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Add Focusrite Clarett 2Pre and 4Pre USB support
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Add correct product series name to messages
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Default mixer driver to enabled
Sanath S <Sanath.S@amd.com>
thunderbolt: Reset topology created by the boot firmware
Sanath S <Sanath.S@amd.com>
thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers
Sanath S <Sanath.S@amd.com>
thunderbolt: Introduce tb_path_deactivate_hop()
Sanath S <Sanath.S@amd.com>
thunderbolt: Introduce tb_port_reset()
Niklas Schnelle <schnelle@linux.ibm.com>
usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff
Niklas Schnelle <schnelle@linux.ibm.com>
usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk
Niklas Schnelle <schnelle@linux.ibm.com>
usb: pci-quirks: group AMD specific quirk code together
Linus Walleij <linus.walleij@linaro.org>
ASoC: ti: Convert Pandora ASoC to GPIO descriptors
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Add support for Clarett 8Pre USB
Geoffrey D. Bennett <g@b4.vu>
ALSA: scarlett2: Move USB IDs out from device_info struct
Alex Deucher <alexander.deucher@amd.com>
drm/radeon: make -fstrict-flex-arrays=3 happy
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/panel: visionox-rm69299: don't unregister DSI device
Mikhail Kobuk <m.kobuk@ispras.ru>
drm: nv04: Fix out of bounds access
Peter Oberparleiter <oberpar@linux.ibm.com>
s390/cio: fix race condition during online processing
Peter Oberparleiter <oberpar@linux.ibm.com>
s390/qdio: handle deferred cc1
Namhyung Kim <namhyung@kernel.org>
perf lock contention: Add a missing NULL check
Michael Guralnik <michaelgur@nvidia.com>
RDMA/mlx5: Fix port number for counter query in multi-port configuration
Mark Zhang <markzhang@nvidia.com>
RDMA/cm: Print the old state when cm_destroy_id gets timeout
Yanjun.Zhu <yanjun.zhu@linux.dev>
RDMA/rxe: Fix the problem "mutex_destroy missing"
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915/mst: Limit MST+DSC to TGL+
Siddharth Vadapalli <s-vadapalli@ti.com>
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
Felix Fietkau <nbd@nbd.name>
net: ethernet: mtk_eth_soc: fix WED + wifi reset
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
gpiolib: swnode: Remove wrong header inclusion
Gerd Bayer <gbayer@linux.ibm.com>
s390/ism: Properly fix receive message buffer allocation
Arınç ÜNAL <arinc.unal@arinc9.com>
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
Arınç ÜNAL <arinc.unal@arinc9.com>
net: dsa: mt7530: fix mirroring frames received on local port
Lei Chen <lei.chen@smartx.com>
tun: limit printing rate when illegal packet received by tun dev
Marcin Szycik <marcin.szycik@linux.intel.com>
ice: Fix checking for unsupported keys on non-tunnel device
Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
ice: tc: allow zero flags in parsing tc flower
Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
ice: tc: check src_vsi in case of traffic from VF
Serge Semin <fancer.lancer@gmail.com>
net: stmmac: Fix IP-cores specific MAC capabilities
Serge Semin <fancer.lancer@gmail.com>
net: stmmac: Fix max-speed being ignored on queue re-init
Serge Semin <fancer.lancer@gmail.com>
net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
Asbjørn Sloth Tønnesen <ast@fiberby.net>
octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementation
Yuri Benditovich <yuri.benditovich@daynix.com>
net: change maximum number of UDP segments to 128
Carolina Jubran <cjubran@nvidia.com>
net/mlx5e: Prevent deadlock while disabling aRFS
Shay Drory <shayd@nvidia.com>
net/mlx5: Lag, restore buckets number to default after hash LAG deactivation
Asbjørn Sloth Tønnesen <ast@fiberby.net>
net: sparx5: flower: fix fragment flags handling
Kuniyuki Iwashima <kuniyu@amazon.com>
af_unix: Don't peek OOB data without MSG_OOB.
Kuniyuki Iwashima <kuniyu@amazon.com>
af_unix: Call manage_oob() for every skb in unix_stream_read_generic().
Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: flowtable: incorrect pppoe tuple
Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: flowtable: validate pppoe header
Florian Westphal <fw@strlen.de>
netfilter: nft_set_pipapo: do not free live element
Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: br_netfilter: skip conntrack input hook for promisc packets
Ziyang Xuan <william.xuanziyang@huawei.com>
netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get()
Ziyang Xuan <william.xuanziyang@huawei.com>
netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()
Manivannan Sadhasivam <mani@kernel.org>
scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
Gavin Shan <gshan@redhat.com>
arm64: tlb: Fix TLBI RANGE operand
Ryan Roberts <ryan.roberts@arm.com>
arm64/mm: Modify range-based tlbi to decrement scale
Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
net: usb: ax88179_178a: avoid writing the mac address before first reading
Bart Van Assche <bvanassche@acm.org>
scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING
Jason A. Donenfeld <Jason@zx2c4.com>
random: handle creditable entropy from atomic process context
Yuanhe Shu <xiangzao@linux.alibaba.com>
selftests/ftrace: Limit length in subsystem-enable tests
Steven Rostedt (Google) <rostedt@goodmis.org>
SUNRPC: Fix rpcgss_context trace event acceptor field
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
drm/i915/vma: Fix UAF on destroy against retire race
Alexey Izbyshev <izbyshev@ispras.ru>
io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: videobuf2: request more buffers for vb2_read
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
drm/msm/dpu: populate SSPP scaler block version
John Stultz <jstultz@google.com>
selftests: timers: Fix posix_timers ksft_print_msg() warning
NeilBrown <neilb@suse.de>
ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
Xiubo Li <xiubli@redhat.com>
ceph: rename _to_client() to _to_fs_client()
Xiubo Li <xiubli@redhat.com>
ceph: pass the mdsc to several helpers
Dillon Varone <dillon.varone@amd.com>
drm/amd/display: Do not recursively call manual trigger programming
Oleg Nesterov <oleg@redhat.com>
selftests/timers/posix_timers: Reimplement check_timer_distribution()
Mark Brown <broonie@kernel.org>
selftests: timers: Convert posix_timers test to generate KTAP output
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Disable live M/N updates when using bigjoiner
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Adjust seamless_m_n flag behaviour
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Enable VRR later during fastsets
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Extract intel_crtc_vblank_evade_scanlines()
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Change intel_pipe_update_{start,end}() calling convention
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915/cdclk: Fix voltage_level programming edge case
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915/mst: Reject FEC+MST on ICL
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Fix FEC pipe A vs. DDI A mixup
Paulo Alcantara <pc@manguebit.com>
smb: client: refresh referral without acquiring refpath_lock
Paulo Alcantara <pc@manguebit.com>
smb: client: guarantee refcounted children from parent session
Steve French <stfrench@microsoft.com>
smb3: show beginning time for per share stats
Paulo Alcantara <pc@manguebit.com>
smb: client: fix UAF in smb2_reconnect_server()
Paulo Alcantara <pc@manguebit.com>
smb: client: remove extra @chan_count check in __cifs_put_smb_ses()
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 3 +
MAINTAINERS | 2 +-
Makefile | 4 +-
arch/arm/mach-omap2/pdata-quirks.c | 10 +
arch/arm64/include/asm/tlbflush.h | 40 ++--
arch/arm64/kernel/head.S | 5 +
arch/arm64/mm/pageattr.c | 3 -
arch/powerpc/include/asm/ftrace.h | 10 +-
arch/powerpc/include/asm/sections.h | 1 +
arch/powerpc/kernel/trace/ftrace.c | 12 +
arch/powerpc/kernel/trace/ftrace_64_pg.c | 5 +
arch/powerpc/kernel/vmlinux.lds.S | 2 +
arch/x86/include/asm/barrier.h | 3 +
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kernel/cpu/bugs.c | 11 +-
arch/x86/kernel/cpu/cpuid-deps.c | 6 +-
arch/x86/kvm/cpuid.c | 1 +
arch/x86/kvm/cpuid.h | 10 +
arch/x86/kvm/lapic.c | 3 +-
arch/x86/kvm/mmu/mmu.c | 2 +-
arch/x86/kvm/mmu/tdp_mmu.c | 21 +-
arch/x86/kvm/vmx/vmx.c | 24 +-
arch/x86/kvm/x86.c | 2 +-
drivers/accessibility/speakup/main.c | 2 +-
drivers/android/binder.c | 4 +-
drivers/char/random.c | 10 +-
drivers/clk/clk.c | 195 ++++++++++++----
drivers/clk/mediatek/clk-mtk.c | 15 ++
drivers/comedi/drivers/vmk80xx.c | 35 +--
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 4 -
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 72 +++---
drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 +-
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c | 3 -
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 +
drivers/gpu/drm/i915/display/intel_atomic.c | 1 +
drivers/gpu/drm/i915/display/intel_cdclk.c | 37 ++-
drivers/gpu/drm/i915/display/intel_crtc.c | 96 +++++---
drivers/gpu/drm/i915/display/intel_crtc.h | 6 +-
drivers/gpu/drm/i915/display/intel_display.c | 43 ++--
.../gpu/drm/i915/display/intel_display_device.h | 1 +
drivers/gpu/drm/i915/display/intel_display_types.h | 2 +-
drivers/gpu/drm/i915/display/intel_dp.c | 13 +-
drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +-
drivers/gpu/drm/i915/i915_vma.c | 42 +++-
.../gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h | 8 +-
.../drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h | 8 +-
.../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 8 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 95 ++++++--
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +-
drivers/gpu/drm/nouveau/nouveau_bios.c | 13 +-
drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c | 7 +-
drivers/gpu/drm/panel/panel-visionox-rm69299.c | 2 -
drivers/gpu/drm/radeon/radeon_atombios.c | 8 +-
drivers/gpu/drm/vmwgfx/vmwgfx_blit.c | 35 ++-
drivers/gpu/drm/vmwgfx/vmwgfx_bo.c | 7 +-
drivers/gpu/drm/vmwgfx/vmwgfx_bo.h | 2 +
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 1 +
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 3 +
drivers/gpu/drm/vmwgfx/vmwgfx_gem.c | 32 +++
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 +-
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 4 +-
drivers/gpu/drm/vmwgfx/vmwgfx_prime.c | 15 +-
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 44 ++--
drivers/infiniband/core/cm.c | 11 +-
drivers/infiniband/hw/mlx5/mad.c | 3 +-
drivers/infiniband/sw/rxe/rxe.c | 2 +
drivers/interconnect/core.c | 8 +
drivers/media/common/videobuf2/videobuf2-core.c | 9 +-
drivers/misc/mei/pci-me.c | 2 +-
drivers/net/dsa/mt7530.c | 38 ++-
drivers/net/dsa/mt7530.h | 5 +
drivers/net/ethernet/intel/ice/ice_tc_lib.c | 15 +-
.../net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 7 +-
drivers/net/ethernet/mediatek/mtk_wed.c | 6 +-
drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c | 27 ++-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 9 +-
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 +
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 4 +-
.../ethernet/microchip/sparx5/sparx5_tc_flower.c | 61 +++--
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 2 +
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 7 +-
.../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 18 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 29 +--
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 18 ++
drivers/net/tun.c | 18 +-
drivers/net/usb/ax88179_178a.c | 4 +-
drivers/net/virtio_net.c | 27 ++-
drivers/pci/bus.c | 49 ++--
drivers/pci/pci.c | 78 ++++---
drivers/pci/pci.h | 4 +-
drivers/pci/pcie/aspm.c | 21 +-
drivers/pci/pcie/dpc.c | 5 +-
drivers/pci/quirks.c | 8 +-
drivers/platform/x86/amd/pmc/pmc-quirks.c | 9 +
drivers/s390/cio/device.c | 13 +-
drivers/s390/cio/qdio_main.c | 28 ++-
drivers/s390/net/ism_drv.c | 37 ++-
drivers/scsi/scsi_lib.c | 7 +-
drivers/thunderbolt/domain.c | 5 +-
drivers/thunderbolt/icm.c | 2 +-
drivers/thunderbolt/lc.c | 45 ++++
drivers/thunderbolt/nhi.c | 19 +-
drivers/thunderbolt/path.c | 13 ++
drivers/thunderbolt/switch.c | 180 +++++++++++++--
drivers/thunderbolt/tb.c | 30 ++-
drivers/thunderbolt/tb.h | 10 +-
drivers/thunderbolt/tb_regs.h | 6 +
drivers/thunderbolt/usb4.c | 52 ++++-
drivers/tty/serial/mxs-auart.c | 8 +-
drivers/tty/serial/pmac_zilog.c | 14 --
drivers/tty/serial/serial_base.h | 4 +
drivers/tty/serial/serial_core.c | 21 +-
drivers/tty/serial/serial_port.c | 34 +++
drivers/tty/serial/stm32-usart.c | 13 +-
drivers/ufs/host/ufs-qcom.c | 8 +-
drivers/usb/Kconfig | 10 +
drivers/usb/class/cdc-wdm.c | 6 +-
drivers/usb/core/hcd-pci.c | 3 +-
drivers/usb/core/hub.c | 15 +-
drivers/usb/core/port.c | 4 +-
drivers/usb/core/quirks.c | 7 +
drivers/usb/dwc2/hcd_ddma.c | 4 +-
drivers/usb/gadget/function/f_ncm.c | 4 +-
drivers/usb/host/pci-quirks.c | 144 ++++++------
drivers/usb/host/pci-quirks.h | 34 ++-
drivers/usb/host/xhci-mem.c | 2 +
drivers/usb/host/xhci-ring.c | 11 +-
drivers/usb/host/xhci.c | 23 +-
drivers/usb/host/xhci.h | 9 +-
drivers/usb/serial/option.c | 40 ++++
fs/ceph/addr.c | 22 +-
fs/ceph/cache.c | 2 +-
fs/ceph/caps.c | 53 +++--
fs/ceph/crypto.c | 2 +-
fs/ceph/debugfs.c | 4 +-
fs/ceph/dir.c | 24 +-
fs/ceph/export.c | 10 +-
fs/ceph/file.c | 26 +--
fs/ceph/inode.c | 14 +-
fs/ceph/ioctl.c | 8 +-
fs/ceph/mds_client.c | 41 ++--
fs/ceph/mds_client.h | 3 +-
fs/ceph/mdsmap.c | 3 +-
fs/ceph/snap.c | 18 +-
fs/ceph/super.c | 22 +-
fs/ceph/super.h | 13 +-
fs/ceph/xattr.c | 12 +-
fs/fuse/dir.c | 1 +
fs/nilfs2/dir.c | 2 +-
fs/smb/client/cifs_debug.c | 6 +-
fs/smb/client/cifsglob.h | 3 +-
fs/smb/client/cifsproto.h | 20 +-
fs/smb/client/connect.c | 135 ++++++-----
fs/smb/client/dfs.c | 51 ++--
fs/smb/client/dfs.h | 33 ++-
fs/smb/client/dfs_cache.c | 53 ++---
fs/smb/client/misc.c | 7 +-
fs/smb/common/smb2pdu.h | 2 +-
fs/smb/server/server.c | 13 +-
fs/smb/server/smb2pdu.c | 4 +
fs/smb/server/vfs.c | 5 +
fs/sysfs/file.c | 2 +
include/asm-generic/barrier.h | 8 +
include/linux/bootconfig.h | 7 +-
include/linux/ceph/mdsmap.h | 5 +-
include/linux/gpio/property.h | 1 -
include/linux/pci.h | 5 +
include/linux/shmem_fs.h | 9 +
include/linux/swapops.h | 65 +++---
include/linux/udp.h | 2 +-
include/linux/usb/hcd.h | 22 +-
include/linux/usb/quirks.h | 3 +
include/net/netfilter/nf_flow_table.h | 12 +-
include/trace/events/rpcgss.h | 4 +-
include/uapi/linux/pci_regs.h | 1 +
init/main.c | 2 +
io_uring/io_uring.c | 26 +--
kernel/sched/sched.h | 20 +-
lib/bootconfig.c | 19 +-
mm/hugetlb.c | 10 +-
mm/memory-failure.c | 18 +-
mm/shmem.c | 6 -
net/bridge/br_input.c | 15 +-
net/bridge/br_netfilter_hooks.c | 6 +
net/bridge/br_private.h | 1 +
net/bridge/netfilter/nf_conntrack_bridge.c | 14 +-
net/netfilter/nf_flow_table_inet.c | 3 +-
net/netfilter/nf_flow_table_ip.c | 10 +-
net/netfilter/nf_tables_api.c | 16 +-
net/netfilter/nft_set_pipapo.c | 14 +-
net/unix/af_unix.c | 12 +-
sound/core/seq/seq_ump_convert.c | 2 +-
sound/pci/hda/patch_realtek.c | 3 +
sound/pci/hda/tas2781_hda_i2c.c | 4 +-
sound/soc/ti/omap3pandora.c | 63 ++---
sound/usb/Makefile | 2 +-
sound/usb/mixer_quirks.c | 9 +-
.../{mixer_scarlett_gen2.c => mixer_scarlett2.c} | 257 +++++++++++++++------
sound/usb/mixer_scarlett2.h | 7 +
sound/usb/mixer_scarlett_gen2.h | 7 -
tools/perf/util/bpf_skel/lock_contention.bpf.c | 5 +-
.../ftrace/test.d/event/subsystem-enable.tc | 6 +-
tools/testing/selftests/kselftest.h | 13 ++
tools/testing/selftests/net/udpgso.c | 2 +-
tools/testing/selftests/timers/posix_timers.c | 156 ++++++-------
208 files changed, 2654 insertions(+), 1290 deletions(-)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 001/158] smb: client: remove extra @chan_count check in __cifs_put_smb_ses()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 002/158] smb: client: fix UAF in smb2_reconnect_server() Greg Kroah-Hartman
` (165 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shyam Prasad N,
Paulo Alcantara (SUSE),
Steve French, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit c37ed2d7d09869f30d291b9c6cba56ea4f0b0417 ]
If @ses->chan_count <= 1, then for-loop body will not be executed so
no need to check it twice.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/client/connect.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c
index 97776dd12b6b8..556f3c31aedc7 100644
--- a/fs/smb/client/connect.c
+++ b/fs/smb/client/connect.c
@@ -2015,9 +2015,10 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb3_fs_context *ctx)
void __cifs_put_smb_ses(struct cifs_ses *ses)
{
- unsigned int rc, xid;
- unsigned int chan_count;
struct TCP_Server_Info *server = ses->server;
+ unsigned int xid;
+ size_t i;
+ int rc;
spin_lock(&ses->ses_lock);
if (ses->ses_status == SES_EXITING) {
@@ -2063,20 +2064,14 @@ void __cifs_put_smb_ses(struct cifs_ses *ses)
list_del_init(&ses->smb_ses_list);
spin_unlock(&cifs_tcp_ses_lock);
- chan_count = ses->chan_count;
-
/* close any extra channels */
- if (chan_count > 1) {
- int i;
-
- for (i = 1; i < chan_count; i++) {
- if (ses->chans[i].iface) {
- kref_put(&ses->chans[i].iface->refcount, release_iface);
- ses->chans[i].iface = NULL;
- }
- cifs_put_tcp_session(ses->chans[i].server, 0);
- ses->chans[i].server = NULL;
+ for (i = 1; i < ses->chan_count; i++) {
+ if (ses->chans[i].iface) {
+ kref_put(&ses->chans[i].iface->refcount, release_iface);
+ ses->chans[i].iface = NULL;
}
+ cifs_put_tcp_session(ses->chans[i].server, 0);
+ ses->chans[i].server = NULL;
}
/* we now account for primary channel in iface->refcount */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 002/158] smb: client: fix UAF in smb2_reconnect_server()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 001/158] smb: client: remove extra @chan_count check in __cifs_put_smb_ses() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 003/158] smb3: show beginning time for per share stats Greg Kroah-Hartman
` (164 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paulo Alcantara (Red Hat),
Steve French, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit 24a9799aa8efecd0eb55a75e35f9d8e6400063aa ]
The UAF bug is due to smb2_reconnect_server() accessing a session that
is already being teared down by another thread that is executing
__cifs_put_smb_ses(). This can happen when (a) the client has
connection to the server but no session or (b) another thread ends up
setting @ses->ses_status again to something different than
SES_EXITING.
To fix this, we need to make sure to unconditionally set
@ses->ses_status to SES_EXITING and prevent any other threads from
setting a new status while we're still tearing it down.
The following can be reproduced by adding some delay to right after
the ipc is freed in __cifs_put_smb_ses() - which will give
smb2_reconnect_server() worker a chance to run and then accessing
@ses->ipc:
kinit ...
mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10
[disconnect srv]
ls /mnt/1 &>/dev/null
sleep 30
kdestroy
[reconnect srv]
sleep 10
umount /mnt/1
...
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed
CIFS: VFS: \\srv Send error in SessSetup = -126
general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39
04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0
Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad
de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75
7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8
RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83
RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800
RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000
R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000
FS: 0000000000000000(0000) GS:ffff888157c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? die_addr+0x36/0x90
? exc_general_protection+0x1c1/0x3f0
? asm_exc_general_protection+0x26/0x30
? __list_del_entry_valid_or_report+0x33/0xf0
__cifs_put_smb_ses+0x1ae/0x500 [cifs]
smb2_reconnect_server+0x4ed/0x710 [cifs]
process_one_work+0x205/0x6b0
worker_thread+0x191/0x360
? __pfx_worker_thread+0x10/0x10
kthread+0xe2/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/client/connect.c | 83 +++++++++++++++++------------------------
1 file changed, 34 insertions(+), 49 deletions(-)
diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c
index 556f3c31aedc7..ae35855966afd 100644
--- a/fs/smb/client/connect.c
+++ b/fs/smb/client/connect.c
@@ -237,7 +237,13 @@ cifs_mark_tcp_ses_conns_for_reconnect(struct TCP_Server_Info *server,
spin_lock(&cifs_tcp_ses_lock);
list_for_each_entry_safe(ses, nses, &pserver->smb_ses_list, smb_ses_list) {
- /* check if iface is still active */
+ spin_lock(&ses->ses_lock);
+ if (ses->ses_status == SES_EXITING) {
+ spin_unlock(&ses->ses_lock);
+ continue;
+ }
+ spin_unlock(&ses->ses_lock);
+
spin_lock(&ses->chan_lock);
if (cifs_ses_get_chan_index(ses, server) ==
CIFS_INVAL_CHAN_INDEX) {
@@ -1960,31 +1966,6 @@ cifs_setup_ipc(struct cifs_ses *ses, struct smb3_fs_context *ctx)
return rc;
}
-/**
- * cifs_free_ipc - helper to release the session IPC tcon
- * @ses: smb session to unmount the IPC from
- *
- * Needs to be called everytime a session is destroyed.
- *
- * On session close, the IPC is closed and the server must release all tcons of the session.
- * No need to send a tree disconnect here.
- *
- * Besides, it will make the server to not close durable and resilient files on session close, as
- * specified in MS-SMB2 3.3.5.6 Receiving an SMB2 LOGOFF Request.
- */
-static int
-cifs_free_ipc(struct cifs_ses *ses)
-{
- struct cifs_tcon *tcon = ses->tcon_ipc;
-
- if (tcon == NULL)
- return 0;
-
- tconInfoFree(tcon);
- ses->tcon_ipc = NULL;
- return 0;
-}
-
static struct cifs_ses *
cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb3_fs_context *ctx)
{
@@ -2016,48 +1997,52 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb3_fs_context *ctx)
void __cifs_put_smb_ses(struct cifs_ses *ses)
{
struct TCP_Server_Info *server = ses->server;
+ struct cifs_tcon *tcon;
unsigned int xid;
size_t i;
+ bool do_logoff;
int rc;
+ spin_lock(&cifs_tcp_ses_lock);
spin_lock(&ses->ses_lock);
- if (ses->ses_status == SES_EXITING) {
+ cifs_dbg(FYI, "%s: id=0x%llx ses_count=%d ses_status=%u ipc=%s\n",
+ __func__, ses->Suid, ses->ses_count, ses->ses_status,
+ ses->tcon_ipc ? ses->tcon_ipc->tree_name : "none");
+ if (ses->ses_status == SES_EXITING || --ses->ses_count > 0) {
spin_unlock(&ses->ses_lock);
+ spin_unlock(&cifs_tcp_ses_lock);
return;
}
- spin_unlock(&ses->ses_lock);
+ /* ses_count can never go negative */
+ WARN_ON(ses->ses_count < 0);
- cifs_dbg(FYI, "%s: ses_count=%d\n", __func__, ses->ses_count);
- cifs_dbg(FYI,
- "%s: ses ipc: %s\n", __func__, ses->tcon_ipc ? ses->tcon_ipc->tree_name : "NONE");
+ spin_lock(&ses->chan_lock);
+ cifs_chan_clear_need_reconnect(ses, server);
+ spin_unlock(&ses->chan_lock);
- spin_lock(&cifs_tcp_ses_lock);
- if (--ses->ses_count > 0) {
- spin_unlock(&cifs_tcp_ses_lock);
- return;
- }
- spin_lock(&ses->ses_lock);
- if (ses->ses_status == SES_GOOD)
- ses->ses_status = SES_EXITING;
+ do_logoff = ses->ses_status == SES_GOOD && server->ops->logoff;
+ ses->ses_status = SES_EXITING;
+ tcon = ses->tcon_ipc;
+ ses->tcon_ipc = NULL;
spin_unlock(&ses->ses_lock);
spin_unlock(&cifs_tcp_ses_lock);
- /* ses_count can never go negative */
- WARN_ON(ses->ses_count < 0);
-
- spin_lock(&ses->ses_lock);
- if (ses->ses_status == SES_EXITING && server->ops->logoff) {
- spin_unlock(&ses->ses_lock);
- cifs_free_ipc(ses);
+ /*
+ * On session close, the IPC is closed and the server must release all
+ * tcons of the session. No need to send a tree disconnect here.
+ *
+ * Besides, it will make the server to not close durable and resilient
+ * files on session close, as specified in MS-SMB2 3.3.5.6 Receiving an
+ * SMB2 LOGOFF Request.
+ */
+ tconInfoFree(tcon);
+ if (do_logoff) {
xid = get_xid();
rc = server->ops->logoff(xid, ses);
if (rc)
cifs_server_dbg(VFS, "%s: Session Logoff failure rc=%d\n",
__func__, rc);
_free_xid(xid);
- } else {
- spin_unlock(&ses->ses_lock);
- cifs_free_ipc(ses);
}
spin_lock(&cifs_tcp_ses_lock);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 003/158] smb3: show beginning time for per share stats
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 001/158] smb: client: remove extra @chan_count check in __cifs_put_smb_ses() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 002/158] smb: client: fix UAF in smb2_reconnect_server() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 004/158] smb: client: guarantee refcounted children from parent session Greg Kroah-Hartman
` (163 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shyam Prasad N, Bharath SM,
Steve French, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French <stfrench@microsoft.com>
[ Upstream commit d8392c203e84ec7daa2afecdb8f4db69bc32416a ]
In analyzing problems, one missing piece of debug data is when the
mount occurred. A related problem is when collecting stats we don't
know the period of time the stats covered, ie when this set of stats
for the tcon started to be collected. To make debugging easier track
the stats begin time. Set it when the mount occurred at mount time,
and reset it to current time whenever stats are reset. For example,
...
1) \\localhost\test
SMBs: 14 since 2024-01-17 22:17:30 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
2) \\localhost\scratch
SMBs: 24 since 2024-01-17 22:16:04 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
Note the time "since ... UTC" is now displayed in /proc/fs/cifs/Stats
for each share that is mounted.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 062a7f0ff46e ("smb: client: guarantee refcounted children from parent session")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/client/cifs_debug.c | 6 ++++--
fs/smb/client/cifsglob.h | 1 +
fs/smb/client/misc.c | 1 +
3 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/smb/client/cifs_debug.c b/fs/smb/client/cifs_debug.c
index 6c85edb8635d0..c53d516459fc4 100644
--- a/fs/smb/client/cifs_debug.c
+++ b/fs/smb/client/cifs_debug.c
@@ -663,6 +663,7 @@ static ssize_t cifs_stats_proc_write(struct file *file,
spin_lock(&tcon->stat_lock);
tcon->bytes_read = 0;
tcon->bytes_written = 0;
+ tcon->stats_from_time = ktime_get_real_seconds();
spin_unlock(&tcon->stat_lock);
if (server->ops->clear_stats)
server->ops->clear_stats(tcon);
@@ -743,8 +744,9 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v)
seq_printf(m, "\n%d) %s", i, tcon->tree_name);
if (tcon->need_reconnect)
seq_puts(m, "\tDISCONNECTED ");
- seq_printf(m, "\nSMBs: %d",
- atomic_read(&tcon->num_smbs_sent));
+ seq_printf(m, "\nSMBs: %d since %ptTs UTC",
+ atomic_read(&tcon->num_smbs_sent),
+ &tcon->stats_from_time);
if (server->ops->print_stats)
server->ops->print_stats(m, tcon);
}
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h
index a878b1e5aa313..01d7031194671 100644
--- a/fs/smb/client/cifsglob.h
+++ b/fs/smb/client/cifsglob.h
@@ -1208,6 +1208,7 @@ struct cifs_tcon {
__u64 bytes_read;
__u64 bytes_written;
spinlock_t stat_lock; /* protects the two fields above */
+ time64_t stats_from_time;
FILE_SYSTEM_DEVICE_INFO fsDevInfo;
FILE_SYSTEM_ATTRIBUTE_INFO fsAttrInfo; /* ok if fs name truncated */
FILE_SYSTEM_UNIX_INFO fsUnixInfo;
diff --git a/fs/smb/client/misc.c b/fs/smb/client/misc.c
index ef573e3f8e52a..51413cb00e199 100644
--- a/fs/smb/client/misc.c
+++ b/fs/smb/client/misc.c
@@ -140,6 +140,7 @@ tcon_info_alloc(bool dir_leases_enabled)
spin_lock_init(&ret_buf->stat_lock);
atomic_set(&ret_buf->num_local_opens, 0);
atomic_set(&ret_buf->num_remote_opens, 0);
+ ret_buf->stats_from_time = ktime_get_real_seconds();
#ifdef CONFIG_CIFS_DFS_UPCALL
INIT_LIST_HEAD(&ret_buf->dfs_ses_list);
#endif
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 004/158] smb: client: guarantee refcounted children from parent session
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 003/158] smb3: show beginning time for per share stats Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 005/158] smb: client: refresh referral without acquiring refpath_lock Greg Kroah-Hartman
` (162 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, kernel test robot,
Paulo Alcantara (Red Hat),
Steve French, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit 062a7f0ff46eb57aff526897bd2bebfdb1d3046a ]
Avoid potential use-after-free bugs when walking DFS referrals,
mounting and performing DFS failover by ensuring that all children
from parent @tcon->ses are also refcounted. They're all needed across
the entire DFS mount. Get rid of @tcon->dfs_ses_list while we're at
it, too.
Cc: stable@vger.kernel.org # 6.4+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021527.ZlRkIxgv-lkp@intel.com/
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/client/cifsglob.h | 2 --
fs/smb/client/cifsproto.h | 20 +++++++--------
fs/smb/client/connect.c | 25 +++++++++++++++----
fs/smb/client/dfs.c | 51 ++++++++++++++++++---------------------
fs/smb/client/dfs.h | 33 ++++++++++++++++---------
fs/smb/client/dfs_cache.c | 11 +--------
fs/smb/client/misc.c | 6 -----
7 files changed, 76 insertions(+), 72 deletions(-)
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h
index 01d7031194671..68fd61a564089 100644
--- a/fs/smb/client/cifsglob.h
+++ b/fs/smb/client/cifsglob.h
@@ -1253,7 +1253,6 @@ struct cifs_tcon {
struct cached_fids *cfids;
/* BB add field for back pointer to sb struct(s)? */
#ifdef CONFIG_CIFS_DFS_UPCALL
- struct list_head dfs_ses_list;
struct delayed_work dfs_cache_work;
#endif
struct delayed_work query_interfaces; /* query interfaces workqueue job */
@@ -1775,7 +1774,6 @@ struct cifs_mount_ctx {
struct TCP_Server_Info *server;
struct cifs_ses *ses;
struct cifs_tcon *tcon;
- struct list_head dfs_ses_list;
};
static inline void __free_dfs_info_param(struct dfs_info3_param *param)
diff --git a/fs/smb/client/cifsproto.h b/fs/smb/client/cifsproto.h
index ed257612bf0bc..1bdad33580b57 100644
--- a/fs/smb/client/cifsproto.h
+++ b/fs/smb/client/cifsproto.h
@@ -716,31 +716,31 @@ struct super_block *cifs_get_tcon_super(struct cifs_tcon *tcon);
void cifs_put_tcon_super(struct super_block *sb);
int cifs_wait_for_server_reconnect(struct TCP_Server_Info *server, bool retry);
-/* Put references of @ses and @ses->dfs_root_ses */
+/* Put references of @ses and its children */
static inline void cifs_put_smb_ses(struct cifs_ses *ses)
{
- struct cifs_ses *rses = ses->dfs_root_ses;
+ struct cifs_ses *next;
- __cifs_put_smb_ses(ses);
- if (rses)
- __cifs_put_smb_ses(rses);
+ do {
+ next = ses->dfs_root_ses;
+ __cifs_put_smb_ses(ses);
+ } while ((ses = next));
}
-/* Get an active reference of @ses and @ses->dfs_root_ses.
+/* Get an active reference of @ses and its children.
*
* NOTE: make sure to call this function when incrementing reference count of
* @ses to ensure that any DFS root session attached to it (@ses->dfs_root_ses)
* will also get its reference count incremented.
*
- * cifs_put_smb_ses() will put both references, so call it when you're done.
+ * cifs_put_smb_ses() will put all references, so call it when you're done.
*/
static inline void cifs_smb_ses_inc_refcount(struct cifs_ses *ses)
{
lockdep_assert_held(&cifs_tcp_ses_lock);
- ses->ses_count++;
- if (ses->dfs_root_ses)
- ses->dfs_root_ses->ses_count++;
+ for (; ses; ses = ses->dfs_root_ses)
+ ses->ses_count++;
}
static inline bool dfs_src_pathname_equal(const char *s1, const char *s2)
diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c
index ae35855966afd..c5705de7f9de2 100644
--- a/fs/smb/client/connect.c
+++ b/fs/smb/client/connect.c
@@ -1863,6 +1863,9 @@ static int match_session(struct cifs_ses *ses, struct smb3_fs_context *ctx)
ctx->sectype != ses->sectype)
return 0;
+ if (ctx->dfs_root_ses != ses->dfs_root_ses)
+ return 0;
+
/*
* If an existing session is limited to less channels than
* requested, it should not be reused
@@ -2355,9 +2358,9 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb3_fs_context *ctx)
* need to lock before changing something in the session.
*/
spin_lock(&cifs_tcp_ses_lock);
+ if (ctx->dfs_root_ses)
+ cifs_smb_ses_inc_refcount(ctx->dfs_root_ses);
ses->dfs_root_ses = ctx->dfs_root_ses;
- if (ses->dfs_root_ses)
- ses->dfs_root_ses->ses_count++;
list_add(&ses->smb_ses_list, &server->smb_ses_list);
spin_unlock(&cifs_tcp_ses_lock);
@@ -3301,6 +3304,9 @@ void cifs_mount_put_conns(struct cifs_mount_ctx *mnt_ctx)
cifs_put_smb_ses(mnt_ctx->ses);
else if (mnt_ctx->server)
cifs_put_tcp_session(mnt_ctx->server, 0);
+ mnt_ctx->ses = NULL;
+ mnt_ctx->tcon = NULL;
+ mnt_ctx->server = NULL;
mnt_ctx->cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_POSIX_PATHS;
free_xid(mnt_ctx->xid);
}
@@ -3579,8 +3585,6 @@ int cifs_mount(struct cifs_sb_info *cifs_sb, struct smb3_fs_context *ctx)
bool isdfs;
int rc;
- INIT_LIST_HEAD(&mnt_ctx.dfs_ses_list);
-
rc = dfs_mount_share(&mnt_ctx, &isdfs);
if (rc)
goto error;
@@ -3611,7 +3615,6 @@ int cifs_mount(struct cifs_sb_info *cifs_sb, struct smb3_fs_context *ctx)
return rc;
error:
- dfs_put_root_smb_sessions(&mnt_ctx.dfs_ses_list);
cifs_mount_put_conns(&mnt_ctx);
return rc;
}
@@ -3626,6 +3629,18 @@ int cifs_mount(struct cifs_sb_info *cifs_sb, struct smb3_fs_context *ctx)
goto error;
rc = cifs_mount_get_tcon(&mnt_ctx);
+ if (!rc) {
+ /*
+ * Prevent superblock from being created with any missing
+ * connections.
+ */
+ if (WARN_ON(!mnt_ctx.server))
+ rc = -EHOSTDOWN;
+ else if (WARN_ON(!mnt_ctx.ses))
+ rc = -EACCES;
+ else if (WARN_ON(!mnt_ctx.tcon))
+ rc = -ENOENT;
+ }
if (rc)
goto error;
diff --git a/fs/smb/client/dfs.c b/fs/smb/client/dfs.c
index 449c59830039b..3ec965547e3d4 100644
--- a/fs/smb/client/dfs.c
+++ b/fs/smb/client/dfs.c
@@ -66,33 +66,20 @@ static int get_session(struct cifs_mount_ctx *mnt_ctx, const char *full_path)
}
/*
- * Track individual DFS referral servers used by new DFS mount.
- *
- * On success, their lifetime will be shared by final tcon (dfs_ses_list).
- * Otherwise, they will be put by dfs_put_root_smb_sessions() in cifs_mount().
+ * Get an active reference of @ses so that next call to cifs_put_tcon() won't
+ * release it as any new DFS referrals must go through its IPC tcon.
*/
-static int add_root_smb_session(struct cifs_mount_ctx *mnt_ctx)
+static void add_root_smb_session(struct cifs_mount_ctx *mnt_ctx)
{
struct smb3_fs_context *ctx = mnt_ctx->fs_ctx;
- struct dfs_root_ses *root_ses;
struct cifs_ses *ses = mnt_ctx->ses;
if (ses) {
- root_ses = kmalloc(sizeof(*root_ses), GFP_KERNEL);
- if (!root_ses)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&root_ses->list);
-
spin_lock(&cifs_tcp_ses_lock);
cifs_smb_ses_inc_refcount(ses);
spin_unlock(&cifs_tcp_ses_lock);
- root_ses->ses = ses;
- list_add_tail(&root_ses->list, &mnt_ctx->dfs_ses_list);
}
- /* Select new DFS referral server so that new referrals go through it */
ctx->dfs_root_ses = ses;
- return 0;
}
static inline int parse_dfs_target(struct smb3_fs_context *ctx,
@@ -185,11 +172,8 @@ static int __dfs_referral_walk(struct cifs_mount_ctx *mnt_ctx,
continue;
}
- if (is_refsrv) {
- rc = add_root_smb_session(mnt_ctx);
- if (rc)
- goto out;
- }
+ if (is_refsrv)
+ add_root_smb_session(mnt_ctx);
rc = ref_walk_advance(rw);
if (!rc) {
@@ -232,6 +216,7 @@ static int __dfs_mount_share(struct cifs_mount_ctx *mnt_ctx)
struct smb3_fs_context *ctx = mnt_ctx->fs_ctx;
struct cifs_tcon *tcon;
char *origin_fullpath;
+ bool new_tcon = true;
int rc;
origin_fullpath = dfs_get_path(cifs_sb, ctx->source);
@@ -239,6 +224,18 @@ static int __dfs_mount_share(struct cifs_mount_ctx *mnt_ctx)
return PTR_ERR(origin_fullpath);
rc = dfs_referral_walk(mnt_ctx);
+ if (!rc) {
+ /*
+ * Prevent superblock from being created with any missing
+ * connections.
+ */
+ if (WARN_ON(!mnt_ctx->server))
+ rc = -EHOSTDOWN;
+ else if (WARN_ON(!mnt_ctx->ses))
+ rc = -EACCES;
+ else if (WARN_ON(!mnt_ctx->tcon))
+ rc = -ENOENT;
+ }
if (rc)
goto out;
@@ -247,15 +244,14 @@ static int __dfs_mount_share(struct cifs_mount_ctx *mnt_ctx)
if (!tcon->origin_fullpath) {
tcon->origin_fullpath = origin_fullpath;
origin_fullpath = NULL;
+ } else {
+ new_tcon = false;
}
spin_unlock(&tcon->tc_lock);
- if (list_empty(&tcon->dfs_ses_list)) {
- list_replace_init(&mnt_ctx->dfs_ses_list, &tcon->dfs_ses_list);
+ if (new_tcon) {
queue_delayed_work(dfscache_wq, &tcon->dfs_cache_work,
dfs_cache_get_ttl() * HZ);
- } else {
- dfs_put_root_smb_sessions(&mnt_ctx->dfs_ses_list);
}
out:
@@ -298,7 +294,6 @@ int dfs_mount_share(struct cifs_mount_ctx *mnt_ctx, bool *isdfs)
if (rc)
return rc;
- ctx->dfs_root_ses = mnt_ctx->ses;
/*
* If called with 'nodfs' mount option, then skip DFS resolving. Otherwise unconditionally
* try to get an DFS referral (even cached) to determine whether it is an DFS mount.
@@ -324,7 +319,9 @@ int dfs_mount_share(struct cifs_mount_ctx *mnt_ctx, bool *isdfs)
*isdfs = true;
add_root_smb_session(mnt_ctx);
- return __dfs_mount_share(mnt_ctx);
+ rc = __dfs_mount_share(mnt_ctx);
+ dfs_put_root_smb_sessions(mnt_ctx);
+ return rc;
}
/* Update dfs referral path of superblock */
diff --git a/fs/smb/client/dfs.h b/fs/smb/client/dfs.h
index 875ab7ae57fcd..e5c4dcf837503 100644
--- a/fs/smb/client/dfs.h
+++ b/fs/smb/client/dfs.h
@@ -7,7 +7,9 @@
#define _CIFS_DFS_H
#include "cifsglob.h"
+#include "cifsproto.h"
#include "fs_context.h"
+#include "dfs_cache.h"
#include "cifs_unicode.h"
#include <linux/namei.h>
@@ -114,11 +116,6 @@ static inline void ref_walk_set_tgt_hint(struct dfs_ref_walk *rw)
ref_walk_tit(rw));
}
-struct dfs_root_ses {
- struct list_head list;
- struct cifs_ses *ses;
-};
-
int dfs_parse_target_referral(const char *full_path, const struct dfs_info3_param *ref,
struct smb3_fs_context *ctx);
int dfs_mount_share(struct cifs_mount_ctx *mnt_ctx, bool *isdfs);
@@ -133,20 +130,32 @@ static inline int dfs_get_referral(struct cifs_mount_ctx *mnt_ctx, const char *p
{
struct smb3_fs_context *ctx = mnt_ctx->fs_ctx;
struct cifs_sb_info *cifs_sb = mnt_ctx->cifs_sb;
+ struct cifs_ses *rses = ctx->dfs_root_ses ?: mnt_ctx->ses;
- return dfs_cache_find(mnt_ctx->xid, ctx->dfs_root_ses, cifs_sb->local_nls,
+ return dfs_cache_find(mnt_ctx->xid, rses, cifs_sb->local_nls,
cifs_remap(cifs_sb), path, ref, tl);
}
-static inline void dfs_put_root_smb_sessions(struct list_head *head)
+/*
+ * cifs_get_smb_ses() already guarantees an active reference of
+ * @ses->dfs_root_ses when a new session is created, so we need to put extra
+ * references of all DFS root sessions that were used across the mount process
+ * in dfs_mount_share().
+ */
+static inline void dfs_put_root_smb_sessions(struct cifs_mount_ctx *mnt_ctx)
{
- struct dfs_root_ses *root, *tmp;
+ const struct smb3_fs_context *ctx = mnt_ctx->fs_ctx;
+ struct cifs_ses *ses = ctx->dfs_root_ses;
+ struct cifs_ses *cur;
+
+ if (!ses)
+ return;
- list_for_each_entry_safe(root, tmp, head, list) {
- list_del_init(&root->list);
- cifs_put_smb_ses(root->ses);
- kfree(root);
+ for (cur = ses; cur; cur = cur->dfs_root_ses) {
+ if (cur->dfs_root_ses)
+ cifs_put_smb_ses(cur->dfs_root_ses);
}
+ cifs_put_smb_ses(ses);
}
#endif /* _CIFS_DFS_H */
diff --git a/fs/smb/client/dfs_cache.c b/fs/smb/client/dfs_cache.c
index 508d831fabe37..0552a864ff08f 100644
--- a/fs/smb/client/dfs_cache.c
+++ b/fs/smb/client/dfs_cache.c
@@ -1278,21 +1278,12 @@ int dfs_cache_remount_fs(struct cifs_sb_info *cifs_sb)
void dfs_cache_refresh(struct work_struct *work)
{
struct TCP_Server_Info *server;
- struct dfs_root_ses *rses;
struct cifs_tcon *tcon;
struct cifs_ses *ses;
tcon = container_of(work, struct cifs_tcon, dfs_cache_work.work);
- ses = tcon->ses;
- server = ses->server;
- mutex_lock(&server->refpath_lock);
- if (server->leaf_fullpath)
- __refresh_tcon(server->leaf_fullpath + 1, ses, false);
- mutex_unlock(&server->refpath_lock);
-
- list_for_each_entry(rses, &tcon->dfs_ses_list, list) {
- ses = rses->ses;
+ for (ses = tcon->ses; ses; ses = ses->dfs_root_ses) {
server = ses->server;
mutex_lock(&server->refpath_lock);
if (server->leaf_fullpath)
diff --git a/fs/smb/client/misc.c b/fs/smb/client/misc.c
index 51413cb00e199..74627d647818a 100644
--- a/fs/smb/client/misc.c
+++ b/fs/smb/client/misc.c
@@ -141,9 +141,6 @@ tcon_info_alloc(bool dir_leases_enabled)
atomic_set(&ret_buf->num_local_opens, 0);
atomic_set(&ret_buf->num_remote_opens, 0);
ret_buf->stats_from_time = ktime_get_real_seconds();
-#ifdef CONFIG_CIFS_DFS_UPCALL
- INIT_LIST_HEAD(&ret_buf->dfs_ses_list);
-#endif
return ret_buf;
}
@@ -159,9 +156,6 @@ tconInfoFree(struct cifs_tcon *tcon)
atomic_dec(&tconInfoAllocCount);
kfree(tcon->nativeFileSystem);
kfree_sensitive(tcon->password);
-#ifdef CONFIG_CIFS_DFS_UPCALL
- dfs_put_root_smb_sessions(&tcon->dfs_ses_list);
-#endif
kfree(tcon->origin_fullpath);
kfree(tcon);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 005/158] smb: client: refresh referral without acquiring refpath_lock
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 004/158] smb: client: guarantee refcounted children from parent session Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 006/158] drm/i915: Fix FEC pipe A vs. DDI A mixup Greg Kroah-Hartman
` (161 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Paulo Alcantara (Red Hat),
Steve French, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara <pc@manguebit.com>
[ Upstream commit 0a05ad21d77a188d06481c36d6016805a881bcc0 ]
Avoid refreshing DFS referral with refpath_lock acquired as the I/O
could block for a while due to a potentially disconnected or slow DFS
root server and then making other threads - that use same @server and
don't require a DFS root server - unable to make any progress.
Cc: stable@vger.kernel.org # 6.4+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/smb/client/dfs_cache.c | 44 +++++++++++++++++++++------------------
1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/fs/smb/client/dfs_cache.c b/fs/smb/client/dfs_cache.c
index 0552a864ff08f..11c8efecf7aa1 100644
--- a/fs/smb/client/dfs_cache.c
+++ b/fs/smb/client/dfs_cache.c
@@ -1172,8 +1172,8 @@ static bool is_ses_good(struct cifs_ses *ses)
return ret;
}
-/* Refresh dfs referral of tcon and mark it for reconnect if needed */
-static int __refresh_tcon(const char *path, struct cifs_ses *ses, bool force_refresh)
+/* Refresh dfs referral of @ses and mark it for reconnect if needed */
+static void __refresh_ses_referral(struct cifs_ses *ses, bool force_refresh)
{
struct TCP_Server_Info *server = ses->server;
DFS_CACHE_TGT_LIST(old_tl);
@@ -1181,10 +1181,21 @@ static int __refresh_tcon(const char *path, struct cifs_ses *ses, bool force_ref
bool needs_refresh = false;
struct cache_entry *ce;
unsigned int xid;
+ char *path = NULL;
int rc = 0;
xid = get_xid();
+ mutex_lock(&server->refpath_lock);
+ if (server->leaf_fullpath) {
+ path = kstrdup(server->leaf_fullpath + 1, GFP_ATOMIC);
+ if (!path)
+ rc = -ENOMEM;
+ }
+ mutex_unlock(&server->refpath_lock);
+ if (!path)
+ goto out;
+
down_read(&htable_rw_lock);
ce = lookup_cache_entry(path);
needs_refresh = force_refresh || IS_ERR(ce) || cache_entry_expired(ce);
@@ -1218,19 +1229,17 @@ static int __refresh_tcon(const char *path, struct cifs_ses *ses, bool force_ref
free_xid(xid);
dfs_cache_free_tgts(&old_tl);
dfs_cache_free_tgts(&new_tl);
- return rc;
+ kfree(path);
}
-static int refresh_tcon(struct cifs_tcon *tcon, bool force_refresh)
+static inline void refresh_ses_referral(struct cifs_ses *ses)
{
- struct TCP_Server_Info *server = tcon->ses->server;
- struct cifs_ses *ses = tcon->ses;
+ __refresh_ses_referral(ses, false);
+}
- mutex_lock(&server->refpath_lock);
- if (server->leaf_fullpath)
- __refresh_tcon(server->leaf_fullpath + 1, ses, force_refresh);
- mutex_unlock(&server->refpath_lock);
- return 0;
+static inline void force_refresh_ses_referral(struct cifs_ses *ses)
+{
+ __refresh_ses_referral(ses, true);
}
/**
@@ -1271,25 +1280,20 @@ int dfs_cache_remount_fs(struct cifs_sb_info *cifs_sb)
*/
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_USE_PREFIX_PATH;
- return refresh_tcon(tcon, true);
+ force_refresh_ses_referral(tcon->ses);
+ return 0;
}
/* Refresh all DFS referrals related to DFS tcon */
void dfs_cache_refresh(struct work_struct *work)
{
- struct TCP_Server_Info *server;
struct cifs_tcon *tcon;
struct cifs_ses *ses;
tcon = container_of(work, struct cifs_tcon, dfs_cache_work.work);
- for (ses = tcon->ses; ses; ses = ses->dfs_root_ses) {
- server = ses->server;
- mutex_lock(&server->refpath_lock);
- if (server->leaf_fullpath)
- __refresh_tcon(server->leaf_fullpath + 1, ses, false);
- mutex_unlock(&server->refpath_lock);
- }
+ for (ses = tcon->ses; ses; ses = ses->dfs_root_ses)
+ refresh_ses_referral(ses);
queue_delayed_work(dfscache_wq, &tcon->dfs_cache_work,
atomic_read(&dfs_cache_ttl) * HZ);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 006/158] drm/i915: Fix FEC pipe A vs. DDI A mixup
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 005/158] smb: client: refresh referral without acquiring refpath_lock Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 007/158] drm/i915/mst: Reject FEC+MST on ICL Greg Kroah-Hartman
` (160 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ville Syrjälä,
Luca Coelho, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 126f94e87e7960ef7ae58180e39c19cc9dcbbf7f ]
On pre-TGL FEC is a port level feature, not a transcoder
level feature, and it's DDI A which doesn't have it, not
trancoder A. Check for the correct thing when determining
whether FEC is supported or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Stable-dep-of: 99f855082f22 ("drm/i915/mst: Reject FEC+MST on ICL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_dp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 18ee4f2a87f9e..fff008955cb2c 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1310,13 +1310,13 @@ bool intel_dp_has_hdmi_sink(struct intel_dp *intel_dp)
static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp,
const struct intel_crtc_state *pipe_config)
{
+ struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- /* On TGL, FEC is supported on all Pipes */
if (DISPLAY_VER(dev_priv) >= 12)
return true;
- if (DISPLAY_VER(dev_priv) == 11 && pipe_config->cpu_transcoder != TRANSCODER_A)
+ if (DISPLAY_VER(dev_priv) == 11 && encoder->port != PORT_A)
return true;
return false;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 007/158] drm/i915/mst: Reject FEC+MST on ICL
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 006/158] drm/i915: Fix FEC pipe A vs. DDI A mixup Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 008/158] drm/i915/cdclk: Fix voltage_level programming edge case Greg Kroah-Hartman
` (159 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uma Shankar, Ville Syrjälä,
Rodrigo Vivi, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 99f855082f228cdcecd6ab768d3b8b505e0eb028 ]
ICL supposedly doesn't support FEC on MST. Reject it.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com
(cherry picked from commit b648ce2a28ba83c4fa67c61fcc5983e15e9d4afb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_dp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index fff008955cb2c..d712cb9b81e1e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1316,7 +1316,8 @@ static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp,
if (DISPLAY_VER(dev_priv) >= 12)
return true;
- if (DISPLAY_VER(dev_priv) == 11 && encoder->port != PORT_A)
+ if (DISPLAY_VER(dev_priv) == 11 && encoder->port != PORT_A &&
+ !intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DP_MST))
return true;
return false;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 008/158] drm/i915/cdclk: Fix voltage_level programming edge case
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 007/158] drm/i915/mst: Reject FEC+MST on ICL Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 009/158] drm/i915: Change intel_pipe_update_{start,end}() calling convention Greg Kroah-Hartman
` (158 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gustavo Sousa, Uma Shankar,
Ville Syrjälä,
Rodrigo Vivi, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 6154cc9177ccea00c89ce0bf93352e474b819ff2 ]
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_cdclk.c | 37 ++++++++++++++++------
1 file changed, 27 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 5aa6b998a1cb1..fc3a6eb1de741 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -2453,7 +2453,8 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
intel_atomic_get_old_cdclk_state(state);
const struct intel_cdclk_state *new_cdclk_state =
intel_atomic_get_new_cdclk_state(state);
- enum pipe pipe = new_cdclk_state->pipe;
+ struct intel_cdclk_config cdclk_config;
+ enum pipe pipe;
if (!intel_cdclk_changed(&old_cdclk_state->actual,
&new_cdclk_state->actual))
@@ -2462,12 +2463,25 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
if (IS_DG2(i915))
intel_cdclk_pcode_pre_notify(state);
- if (new_cdclk_state->disable_pipes ||
- old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
- drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
+ if (new_cdclk_state->disable_pipes) {
+ cdclk_config = new_cdclk_state->actual;
+ pipe = INVALID_PIPE;
+ } else {
+ if (new_cdclk_state->actual.cdclk >= old_cdclk_state->actual.cdclk) {
+ cdclk_config = new_cdclk_state->actual;
+ pipe = new_cdclk_state->pipe;
+ } else {
+ cdclk_config = old_cdclk_state->actual;
+ pipe = INVALID_PIPE;
+ }
- intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
+ cdclk_config.voltage_level = max(new_cdclk_state->actual.voltage_level,
+ old_cdclk_state->actual.voltage_level);
}
+
+ drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
+
+ intel_set_cdclk(i915, &cdclk_config, pipe);
}
/**
@@ -2485,7 +2499,7 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
intel_atomic_get_old_cdclk_state(state);
const struct intel_cdclk_state *new_cdclk_state =
intel_atomic_get_new_cdclk_state(state);
- enum pipe pipe = new_cdclk_state->pipe;
+ enum pipe pipe;
if (!intel_cdclk_changed(&old_cdclk_state->actual,
&new_cdclk_state->actual))
@@ -2495,11 +2509,14 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
intel_cdclk_pcode_post_notify(state);
if (!new_cdclk_state->disable_pipes &&
- old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
- drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
+ new_cdclk_state->actual.cdclk < old_cdclk_state->actual.cdclk)
+ pipe = new_cdclk_state->pipe;
+ else
+ pipe = INVALID_PIPE;
- intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
- }
+ drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
+
+ intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
}
static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state)
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 009/158] drm/i915: Change intel_pipe_update_{start,end}() calling convention
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 008/158] drm/i915/cdclk: Fix voltage_level programming edge case Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 010/158] drm/i915: Extract intel_crtc_vblank_evade_scanlines() Greg Kroah-Hartman
` (157 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manasi Navare,
Ville Syrjälä,
Mitul Golani, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 09f390d4e2f38f8433431f4da31ca0a17a5c7853 ]
We'll need to also look at the old crtc state in
intel_pipe_update_start() so change the calling convention to
just plumb in the full atomic state instead.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_crtc.c | 18 ++++++++++++------
drivers/gpu/drm/i915/display/intel_crtc.h | 6 ++++--
drivers/gpu/drm/i915/display/intel_display.c | 4 ++--
3 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index 182c6dd64f47c..65d91c7ad22ff 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -470,7 +470,8 @@ static int intel_mode_vblank_start(const struct drm_display_mode *mode)
/**
* intel_pipe_update_start() - start update of a set of display registers
- * @new_crtc_state: the new crtc state
+ * @state: the atomic state
+ * @crtc: the crtc
*
* Mark the start of an update to pipe registers that should be updated
* atomically regarding vblank. If the next vblank will happens within
@@ -480,10 +481,12 @@ static int intel_mode_vblank_start(const struct drm_display_mode *mode)
* until a subsequent call to intel_pipe_update_end(). That is done to
* avoid random delays.
*/
-void intel_pipe_update_start(struct intel_crtc_state *new_crtc_state)
+void intel_pipe_update_start(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
- struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ struct intel_crtc_state *new_crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
long timeout = msecs_to_jiffies_timeout(1);
int scanline, min, max, vblank_start;
@@ -631,15 +634,18 @@ static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end) {}
/**
* intel_pipe_update_end() - end update of a set of display registers
- * @new_crtc_state: the new crtc state
+ * @state: the atomic state
+ * @crtc: the crtc
*
* Mark the end of an update started with intel_pipe_update_start(). This
* re-enables interrupts and verifies the update was actually completed
* before a vblank.
*/
-void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
+void intel_pipe_update_end(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
- struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+ struct intel_crtc_state *new_crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
enum pipe pipe = crtc->pipe;
int scanline_end = intel_get_crtc_scanline(crtc);
u32 end_vbl_count = intel_crtc_get_vblank_counter(crtc);
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.h b/drivers/gpu/drm/i915/display/intel_crtc.h
index 51a4c8df9e657..22d7993d1f0ba 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.h
+++ b/drivers/gpu/drm/i915/display/intel_crtc.h
@@ -36,8 +36,10 @@ void intel_crtc_state_reset(struct intel_crtc_state *crtc_state,
u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc);
void intel_crtc_vblank_on(const struct intel_crtc_state *crtc_state);
void intel_crtc_vblank_off(const struct intel_crtc_state *crtc_state);
-void intel_pipe_update_start(struct intel_crtc_state *new_crtc_state);
-void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state);
+void intel_pipe_update_start(struct intel_atomic_state *state,
+ struct intel_crtc *crtc);
+void intel_pipe_update_end(struct intel_atomic_state *state,
+ struct intel_crtc *crtc);
void intel_wait_for_vblank_workers(struct intel_atomic_state *state);
struct intel_crtc *intel_first_crtc(struct drm_i915_private *i915);
struct intel_crtc *intel_crtc_for_pipe(struct drm_i915_private *i915,
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index a072fbb9872aa..af93761e82cac 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -6616,7 +6616,7 @@ static void intel_update_crtc(struct intel_atomic_state *state,
intel_crtc_planes_update_noarm(state, crtc);
/* Perform vblank evasion around commit operation */
- intel_pipe_update_start(new_crtc_state);
+ intel_pipe_update_start(state, crtc);
commit_pipe_pre_planes(state, crtc);
@@ -6624,7 +6624,7 @@ static void intel_update_crtc(struct intel_atomic_state *state,
commit_pipe_post_planes(state, crtc);
- intel_pipe_update_end(new_crtc_state);
+ intel_pipe_update_end(state, crtc);
/*
* We usually enable FIFO underrun interrupts as part of the
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 010/158] drm/i915: Extract intel_crtc_vblank_evade_scanlines()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 009/158] drm/i915: Change intel_pipe_update_{start,end}() calling convention Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 011/158] drm/i915: Enable VRR later during fastsets Greg Kroah-Hartman
` (156 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manasi Navare,
Ville Syrjälä,
Mitul Golani, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit f4b0cece716c95e16d973a774d5a5c5cc8cb335d ]
Pull the vblank evasion scanline calculations into their own helper
to declutter intel_pipe_update_start() a bit.
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_crtc.c | 53 +++++++++++++----------
1 file changed, 31 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index 65d91c7ad22ff..9693747a18c66 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -468,6 +468,36 @@ static int intel_mode_vblank_start(const struct drm_display_mode *mode)
return vblank_start;
}
+static void intel_crtc_vblank_evade_scanlines(struct intel_atomic_state *state,
+ struct intel_crtc *crtc,
+ int *min, int *max, int *vblank_start)
+{
+ const struct intel_crtc_state *new_crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
+ const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
+
+ if (new_crtc_state->vrr.enable) {
+ if (intel_vrr_is_push_sent(new_crtc_state))
+ *vblank_start = intel_vrr_vmin_vblank_start(new_crtc_state);
+ else
+ *vblank_start = intel_vrr_vmax_vblank_start(new_crtc_state);
+ } else {
+ *vblank_start = intel_mode_vblank_start(adjusted_mode);
+ }
+
+ /* FIXME needs to be calibrated sensibly */
+ *min = *vblank_start - intel_usecs_to_scanlines(adjusted_mode,
+ VBLANK_EVASION_TIME_US);
+ *max = *vblank_start - 1;
+
+ /*
+ * M/N is double buffered on the transcoder's undelayed vblank,
+ * so with seamless M/N we must evade both vblanks.
+ */
+ if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
+ *min -= adjusted_mode->crtc_vblank_start - adjusted_mode->crtc_vdisplay;
+}
+
/**
* intel_pipe_update_start() - start update of a set of display registers
* @state: the atomic state
@@ -487,7 +517,6 @@ void intel_pipe_update_start(struct intel_atomic_state *state,
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_crtc_state *new_crtc_state =
intel_atomic_get_new_crtc_state(state, crtc);
- const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
long timeout = msecs_to_jiffies_timeout(1);
int scanline, min, max, vblank_start;
wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
@@ -503,27 +532,7 @@ void intel_pipe_update_start(struct intel_atomic_state *state,
if (intel_crtc_needs_vblank_work(new_crtc_state))
intel_crtc_vblank_work_init(new_crtc_state);
- if (new_crtc_state->vrr.enable) {
- if (intel_vrr_is_push_sent(new_crtc_state))
- vblank_start = intel_vrr_vmin_vblank_start(new_crtc_state);
- else
- vblank_start = intel_vrr_vmax_vblank_start(new_crtc_state);
- } else {
- vblank_start = intel_mode_vblank_start(adjusted_mode);
- }
-
- /* FIXME needs to be calibrated sensibly */
- min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
- VBLANK_EVASION_TIME_US);
- max = vblank_start - 1;
-
- /*
- * M/N is double buffered on the transcoder's undelayed vblank,
- * so with seamless M/N we must evade both vblanks.
- */
- if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
- min -= adjusted_mode->crtc_vblank_start - adjusted_mode->crtc_vdisplay;
-
+ intel_crtc_vblank_evade_scanlines(state, crtc, &min, &max, &vblank_start);
if (min <= 0 || max <= 0)
goto irq_disable;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 011/158] drm/i915: Enable VRR later during fastsets
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 010/158] drm/i915: Extract intel_crtc_vblank_evade_scanlines() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 012/158] drm/i915: Adjust seamless_m_n flag behaviour Greg Kroah-Hartman
` (155 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manasi Navare,
Ville Syrjälä,
Mitul Golani, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 691dec86acc3afb469f09e9a4a00508b458bdb0c ]
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.
This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).
This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_crtc.c | 35 ++++++++++++--------
drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++----
2 files changed, 36 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index 9693747a18c66..5c89eba8148c0 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -472,15 +472,31 @@ static void intel_crtc_vblank_evade_scanlines(struct intel_atomic_state *state,
struct intel_crtc *crtc,
int *min, int *max, int *vblank_start)
{
+ const struct intel_crtc_state *old_crtc_state =
+ intel_atomic_get_old_crtc_state(state, crtc);
const struct intel_crtc_state *new_crtc_state =
intel_atomic_get_new_crtc_state(state, crtc);
- const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
+ const struct intel_crtc_state *crtc_state;
+ const struct drm_display_mode *adjusted_mode;
- if (new_crtc_state->vrr.enable) {
- if (intel_vrr_is_push_sent(new_crtc_state))
- *vblank_start = intel_vrr_vmin_vblank_start(new_crtc_state);
+ /*
+ * During fastsets/etc. the transcoder is still
+ * running with the old timings at this point.
+ *
+ * TODO: maybe just use the active timings here?
+ */
+ if (intel_crtc_needs_modeset(new_crtc_state))
+ crtc_state = new_crtc_state;
+ else
+ crtc_state = old_crtc_state;
+
+ adjusted_mode = &crtc_state->hw.adjusted_mode;
+
+ if (crtc->mode_flags & I915_MODE_FLAG_VRR) {
+ if (intel_vrr_is_push_sent(crtc_state))
+ *vblank_start = intel_vrr_vmin_vblank_start(crtc_state);
else
- *vblank_start = intel_vrr_vmax_vblank_start(new_crtc_state);
+ *vblank_start = intel_vrr_vmax_vblank_start(crtc_state);
} else {
*vblank_start = intel_mode_vblank_start(adjusted_mode);
}
@@ -712,15 +728,6 @@ void intel_pipe_update_end(struct intel_atomic_state *state,
*/
intel_vrr_send_push(new_crtc_state);
- /*
- * Seamless M/N update may need to update frame timings.
- *
- * FIXME Should be synchronized with the start of vblank somehow...
- */
- if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
- intel_crtc_update_active_timings(new_crtc_state,
- new_crtc_state->vrr.enable);
-
local_irq_enable();
if (intel_vgpu_active(dev_priv))
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index af93761e82cac..39efd67cc3232 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -6533,6 +6533,8 @@ static void commit_pipe_post_planes(struct intel_atomic_state *state,
struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+ const struct intel_crtc_state *old_crtc_state =
+ intel_atomic_get_old_crtc_state(state, crtc);
const struct intel_crtc_state *new_crtc_state =
intel_atomic_get_new_crtc_state(state, crtc);
@@ -6544,6 +6546,9 @@ static void commit_pipe_post_planes(struct intel_atomic_state *state,
if (DISPLAY_VER(dev_priv) >= 9 &&
!intel_crtc_needs_modeset(new_crtc_state))
skl_detach_scalers(new_crtc_state);
+
+ if (vrr_enabling(old_crtc_state, new_crtc_state))
+ intel_vrr_enable(new_crtc_state);
}
static void intel_enable_crtc(struct intel_atomic_state *state,
@@ -6584,12 +6589,6 @@ static void intel_update_crtc(struct intel_atomic_state *state,
intel_dpt_configure(crtc);
}
- if (vrr_enabling(old_crtc_state, new_crtc_state)) {
- intel_vrr_enable(new_crtc_state);
- intel_crtc_update_active_timings(new_crtc_state,
- new_crtc_state->vrr.enable);
- }
-
if (!modeset) {
if (new_crtc_state->preload_luts &&
intel_crtc_needs_color_update(new_crtc_state))
@@ -6626,6 +6625,16 @@ static void intel_update_crtc(struct intel_atomic_state *state,
intel_pipe_update_end(state, crtc);
+ /*
+ * VRR/Seamless M/N update may need to update frame timings.
+ *
+ * FIXME Should be synchronized with the start of vblank somehow...
+ */
+ if (vrr_enabling(old_crtc_state, new_crtc_state) ||
+ (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state)))
+ intel_crtc_update_active_timings(new_crtc_state,
+ new_crtc_state->vrr.enable);
+
/*
* We usually enable FIFO underrun interrupts as part of the
* CRTC enable sequence during modesets. But when we inherit a
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 012/158] drm/i915: Adjust seamless_m_n flag behaviour
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 011/158] drm/i915: Enable VRR later during fastsets Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 013/158] drm/i915: Disable live M/N updates when using bigjoiner Greg Kroah-Hartman
` (154 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Manasi Navare,
Ville Syrjälä,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 825edc8bc72f3266534a04e9a4447b12332fac82 ]
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_atomic.c | 1 +
drivers/gpu/drm/i915/display/intel_crtc.c | 2 +-
drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++--------
.../drm/i915/display/intel_display_types.h | 2 +-
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
5 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c b/drivers/gpu/drm/i915/display/intel_atomic.c
index 7cf51dd8c0567..aaddd8c0cfa0e 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic.c
@@ -259,6 +259,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
drm_property_blob_get(crtc_state->post_csc_lut);
crtc_state->update_pipe = false;
+ crtc_state->update_m_n = false;
crtc_state->disable_lp_wm = false;
crtc_state->disable_cxsr = false;
crtc_state->update_wm_pre = false;
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index 5c89eba8148c0..cfbfbfed3f5e6 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -510,7 +510,7 @@ static void intel_crtc_vblank_evade_scanlines(struct intel_atomic_state *state,
* M/N is double buffered on the transcoder's undelayed vblank,
* so with seamless M/N we must evade both vblanks.
*/
- if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
+ if (new_crtc_state->update_m_n)
*min -= adjusted_mode->crtc_vblank_start - adjusted_mode->crtc_vdisplay;
}
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 39efd67cc3232..1a59fca40252c 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5215,7 +5215,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
PIPE_CONF_CHECK_X(lane_lat_optim_mask);
if (HAS_DOUBLE_BUFFERED_M_N(dev_priv)) {
- if (!fastset || !pipe_config->seamless_m_n)
+ if (!fastset || !pipe_config->update_m_n)
PIPE_CONF_CHECK_M_N(dp_m_n);
} else {
PIPE_CONF_CHECK_M_N(dp_m_n);
@@ -5353,7 +5353,7 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
if (IS_G4X(dev_priv) || DISPLAY_VER(dev_priv) >= 5)
PIPE_CONF_CHECK_I(pipe_bpp);
- if (!fastset || !pipe_config->seamless_m_n) {
+ if (!fastset || !pipe_config->update_m_n) {
PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_clock);
PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_clock);
}
@@ -5448,6 +5448,7 @@ int intel_modeset_all_pipes(struct intel_atomic_state *state,
crtc_state->uapi.mode_changed = true;
crtc_state->update_pipe = false;
+ crtc_state->update_m_n = false;
ret = drm_atomic_add_affected_connectors(&state->base,
&crtc->base);
@@ -5565,13 +5566,14 @@ static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta
{
struct drm_i915_private *i915 = to_i915(old_crtc_state->uapi.crtc->dev);
- if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true)) {
+ if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true))
drm_dbg_kms(&i915->drm, "fastset requirement not met, forcing full modeset\n");
+ else
+ new_crtc_state->uapi.mode_changed = false;
- return;
- }
+ if (intel_crtc_needs_modeset(new_crtc_state))
+ new_crtc_state->update_m_n = false;
- new_crtc_state->uapi.mode_changed = false;
if (!intel_crtc_needs_modeset(new_crtc_state))
new_crtc_state->update_pipe = true;
}
@@ -6297,6 +6299,7 @@ int intel_atomic_check(struct drm_device *dev,
if (intel_cpu_transcoders_need_modeset(state, BIT(master))) {
new_crtc_state->uapi.mode_changed = true;
new_crtc_state->update_pipe = false;
+ new_crtc_state->update_m_n = false;
}
}
@@ -6309,6 +6312,7 @@ int intel_atomic_check(struct drm_device *dev,
if (intel_cpu_transcoders_need_modeset(state, trans)) {
new_crtc_state->uapi.mode_changed = true;
new_crtc_state->update_pipe = false;
+ new_crtc_state->update_m_n = false;
}
}
@@ -6316,6 +6320,7 @@ int intel_atomic_check(struct drm_device *dev,
if (intel_pipes_need_modeset(state, new_crtc_state->bigjoiner_pipes)) {
new_crtc_state->uapi.mode_changed = true;
new_crtc_state->update_pipe = false;
+ new_crtc_state->update_m_n = false;
}
}
}
@@ -6494,7 +6499,7 @@ static void intel_pipe_fastset(const struct intel_crtc_state *old_crtc_state,
IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
hsw_set_linetime_wm(new_crtc_state);
- if (new_crtc_state->seamless_m_n)
+ if (new_crtc_state->update_m_n)
intel_cpu_transcoder_set_m1_n1(crtc, new_crtc_state->cpu_transcoder,
&new_crtc_state->dp_m_n);
}
@@ -6630,8 +6635,7 @@ static void intel_update_crtc(struct intel_atomic_state *state,
*
* FIXME Should be synchronized with the start of vblank somehow...
*/
- if (vrr_enabling(old_crtc_state, new_crtc_state) ||
- (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state)))
+ if (vrr_enabling(old_crtc_state, new_crtc_state) || new_crtc_state->update_m_n)
intel_crtc_update_active_timings(new_crtc_state,
new_crtc_state->vrr.enable);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 8b0dc2b75da4a..1c23b186aff20 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1084,6 +1084,7 @@ struct intel_crtc_state {
unsigned fb_bits; /* framebuffers to flip */
bool update_pipe; /* can a fast modeset be performed? */
+ bool update_m_n; /* update M/N seamlessly during fastset? */
bool disable_cxsr;
bool update_wm_pre, update_wm_post; /* watermarks are updated */
bool fifo_changed; /* FIFO split is changed */
@@ -1196,7 +1197,6 @@ struct intel_crtc_state {
/* m2_n2 for eDP downclock */
struct intel_link_m_n dp_m2_n2;
bool has_drrs;
- bool seamless_m_n;
/* PSR is supported but might not be enabled due the lack of enabled planes */
bool has_psr;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d712cb9b81e1e..7e135ed8e1d75 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2149,7 +2149,7 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
int pixel_clock;
if (has_seamless_m_n(connector))
- pipe_config->seamless_m_n = true;
+ pipe_config->update_m_n = true;
if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
if (intel_cpu_transcoder_has_m2_n2(i915, pipe_config->cpu_transcoder))
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 013/158] drm/i915: Disable live M/N updates when using bigjoiner
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 012/158] drm/i915: Adjust seamless_m_n flag behaviour Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 014/158] selftests: timers: Convert posix_timers test to generate KTAP output Greg Kroah-Hartman
` (153 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vidya Srinivas, Arun R Murthy,
Ville Syrjälä,
Rodrigo Vivi, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 4a36e46df7aa781c756f09727d37dc2783f1ee75 ]
All joined pipes share the same transcoder/timing generator.
Currently we just do the commits per-pipe, which doesn't really
work if we need to change the timings at the same time. For
now just disable live M/N updates when bigjoiner is needed.
Cc: stable@vger.kernel.org
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_dp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 7e135ed8e1d75..ccc47cf4d15d8 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2148,7 +2148,11 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
intel_panel_downclock_mode(connector, &pipe_config->hw.adjusted_mode);
int pixel_clock;
- if (has_seamless_m_n(connector))
+ /*
+ * FIXME all joined pipes share the same transcoder.
+ * Need to account for that when updating M/N live.
+ */
+ if (has_seamless_m_n(connector) && !pipe_config->bigjoiner_pipes)
pipe_config->update_m_n = true;
if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 014/158] selftests: timers: Convert posix_timers test to generate KTAP output
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 013/158] drm/i915: Disable live M/N updates when using bigjoiner Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 015/158] selftests/timers/posix_timers: Reimplement check_timer_distribution() Greg Kroah-Hartman
` (152 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mark Brown, Shuah Khan, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown <broonie@kernel.org>
[ Upstream commit 071af0c9e582bc47e379e39490a2bc1adfe4ec68 ]
Currently the posix_timers test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
As part of this fix the printing of diagnostics in the unlikely event that
the pthread APIs fail, these were using perror() but the API functions
directly return an error code instead of setting errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/timers/posix_timers.c | 81 ++++++++++---------
1 file changed, 41 insertions(+), 40 deletions(-)
diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c
index 9a42403eaff70..2669c45316b3d 100644
--- a/tools/testing/selftests/timers/posix_timers.c
+++ b/tools/testing/selftests/timers/posix_timers.c
@@ -76,22 +76,21 @@ static int check_diff(struct timeval start, struct timeval end)
static int check_itimer(int which)
{
+ const char *name;
int err;
struct timeval start, end;
struct itimerval val = {
.it_value.tv_sec = DELAY,
};
- printf("Check itimer ");
-
if (which == ITIMER_VIRTUAL)
- printf("virtual... ");
+ name = "ITIMER_VIRTUAL";
else if (which == ITIMER_PROF)
- printf("prof... ");
+ name = "ITIMER_PROF";
else if (which == ITIMER_REAL)
- printf("real... ");
-
- fflush(stdout);
+ name = "ITIMER_REAL";
+ else
+ return -1;
done = 0;
@@ -104,13 +103,13 @@ static int check_itimer(int which)
err = gettimeofday(&start, NULL);
if (err < 0) {
- perror("Can't call gettimeofday()\n");
+ ksft_perror("Can't call gettimeofday()");
return -1;
}
err = setitimer(which, &val, NULL);
if (err < 0) {
- perror("Can't set timer\n");
+ ksft_perror("Can't set timer");
return -1;
}
@@ -123,20 +122,18 @@ static int check_itimer(int which)
err = gettimeofday(&end, NULL);
if (err < 0) {
- perror("Can't call gettimeofday()\n");
+ ksft_perror("Can't call gettimeofday()");
return -1;
}
- if (!check_diff(start, end))
- printf("[OK]\n");
- else
- printf("[FAIL]\n");
+ ksft_test_result(check_diff(start, end) == 0, "%s\n", name);
return 0;
}
static int check_timer_create(int which)
{
+ const char *type;
int err;
timer_t id;
struct timeval start, end;
@@ -144,31 +141,32 @@ static int check_timer_create(int which)
.it_value.tv_sec = DELAY,
};
- printf("Check timer_create() ");
if (which == CLOCK_THREAD_CPUTIME_ID) {
- printf("per thread... ");
+ type = "thread";
} else if (which == CLOCK_PROCESS_CPUTIME_ID) {
- printf("per process... ");
+ type = "process";
+ } else {
+ ksft_print_msg("Unknown timer_create() type %d\n", which);
+ return -1;
}
- fflush(stdout);
done = 0;
err = timer_create(which, NULL, &id);
if (err < 0) {
- perror("Can't create timer\n");
+ ksft_perror("Can't create timer");
return -1;
}
signal(SIGALRM, sig_handler);
err = gettimeofday(&start, NULL);
if (err < 0) {
- perror("Can't call gettimeofday()\n");
+ ksft_perror("Can't call gettimeofday()");
return -1;
}
err = timer_settime(id, 0, &val, NULL);
if (err < 0) {
- perror("Can't set timer\n");
+ ksft_perror("Can't set timer");
return -1;
}
@@ -176,14 +174,12 @@ static int check_timer_create(int which)
err = gettimeofday(&end, NULL);
if (err < 0) {
- perror("Can't call gettimeofday()\n");
+ ksft_perror("Can't call gettimeofday()");
return -1;
}
- if (!check_diff(start, end))
- printf("[OK]\n");
- else
- printf("[FAIL]\n");
+ ksft_test_result(check_diff(start, end) == 0,
+ "timer_create() per %s\n", type);
return 0;
}
@@ -220,25 +216,25 @@ static int check_timer_distribution(void)
.it_interval.tv_nsec = 1000 * 1000,
};
- printf("Check timer_create() per process signal distribution... ");
- fflush(stdout);
-
remain = nthreads + 1; /* worker threads + this thread */
signal(SIGALRM, distribution_handler);
err = timer_create(CLOCK_PROCESS_CPUTIME_ID, NULL, &id);
if (err < 0) {
- perror("Can't create timer\n");
+ ksft_perror("Can't create timer");
return -1;
}
err = timer_settime(id, 0, &val, NULL);
if (err < 0) {
- perror("Can't set timer\n");
+ ksft_perror("Can't set timer");
return -1;
}
for (i = 0; i < nthreads; i++) {
- if (pthread_create(&threads[i], NULL, distribution_thread, NULL)) {
- perror("Can't create thread\n");
+ err = pthread_create(&threads[i], NULL, distribution_thread,
+ NULL);
+ if (err) {
+ ksft_print_msg("Can't create thread: %s (%d)\n",
+ strerror(errno), errno);
return -1;
}
}
@@ -247,25 +243,30 @@ static int check_timer_distribution(void)
while (__atomic_load_n(&remain, __ATOMIC_RELAXED));
for (i = 0; i < nthreads; i++) {
- if (pthread_join(threads[i], NULL)) {
- perror("Can't join thread\n");
+ err = pthread_join(threads[i], NULL);
+ if (err) {
+ ksft_print_msg("Can't join thread: %s (%d)\n",
+ strerror(errno), errno);
return -1;
}
}
if (timer_delete(id)) {
- perror("Can't delete timer\n");
+ ksft_perror("Can't delete timer");
return -1;
}
- printf("[OK]\n");
+ ksft_test_result_pass("check_timer_distribution\n");
return 0;
}
int main(int argc, char **argv)
{
- printf("Testing posix timers. False negative may happen on CPU execution \n");
- printf("based timers if other threads run on the CPU...\n");
+ ksft_print_header();
+ ksft_set_plan(6);
+
+ ksft_print_msg("Testing posix timers. False negative may happen on CPU execution \n");
+ ksft_print_msg("based timers if other threads run on the CPU...\n");
if (check_itimer(ITIMER_VIRTUAL) < 0)
return ksft_exit_fail();
@@ -294,5 +295,5 @@ int main(int argc, char **argv)
if (check_timer_distribution() < 0)
return ksft_exit_fail();
- return ksft_exit_pass();
+ ksft_finished();
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 015/158] selftests/timers/posix_timers: Reimplement check_timer_distribution()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 014/158] selftests: timers: Convert posix_timers test to generate KTAP output Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 016/158] drm/amd/display: Do not recursively call manual trigger programming Greg Kroah-Hartman
` (151 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Oleg Nesterov, Thomas Gleixner, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
[ Upstream commit 6d029c25b71f2de2838a6f093ce0fa0e69336154 ]
check_timer_distribution() runs ten threads in a busy loop and tries to
test that the kernel distributes a process posix CPU timer signal to every
thread over time.
There is not guarantee that this is true even after commit bcb7ee79029d
("posix-timers: Prefer delivery of signals to the current thread") because
that commit only avoids waking up the sleeping process leader thread, but
that has nothing to do with the actual signal delivery.
As the signal is process wide the first thread which observes sigpending
and wins the race to lock sighand will deliver the signal. Testing shows
that this hangs on a regular base because some threads never win the race.
The comment "This primarily tests that the kernel does not favour any one."
is wrong. The kernel does favour a thread which hits the timer interrupt
when CLOCK_PROCESS_CPUTIME_ID expires.
Rewrite the test so it only checks that the group leader sleeping in join()
never receives SIGALRM and the thread which burns CPU cycles receives all
signals.
In older kernels which do not have commit bcb7ee79029d ("posix-timers:
Prefer delivery of signals to the current thread") the test-case fails
immediately, the very 1st tick wakes the leader up. Otherwise it quickly
succeeds after 100 ticks.
CI testing wants to use newer selftest versions on stable kernels. In this
case the test is guaranteed to fail.
So check in the failure case whether the kernel version is less than v6.3
and skip the test result in that case.
[ tglx: Massaged change log, renamed the version check helper ]
Fixes: e797203fb3ba ("selftests/timers/posix_timers: Test delivery of signals across threads")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/kselftest.h | 13 +++
tools/testing/selftests/timers/posix_timers.c | 103 ++++++++----------
2 files changed, 60 insertions(+), 56 deletions(-)
diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h
index 529d29a359002..68d5a93dff8dc 100644
--- a/tools/testing/selftests/kselftest.h
+++ b/tools/testing/selftests/kselftest.h
@@ -49,6 +49,7 @@
#include <unistd.h>
#include <stdarg.h>
#include <stdio.h>
+#include <sys/utsname.h>
#endif
#ifndef ARRAY_SIZE
@@ -327,4 +328,16 @@ static inline int ksft_exit_skip(const char *msg, ...)
exit(KSFT_SKIP);
}
+static inline int ksft_min_kernel_version(unsigned int min_major,
+ unsigned int min_minor)
+{
+ unsigned int major, minor;
+ struct utsname info;
+
+ if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
+ ksft_exit_fail_msg("Can't parse kernel version\n");
+
+ return major > min_major || (major == min_major && minor >= min_minor);
+}
+
#endif /* __KSELFTEST_H */
diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c
index 2669c45316b3d..14355d8472110 100644
--- a/tools/testing/selftests/timers/posix_timers.c
+++ b/tools/testing/selftests/timers/posix_timers.c
@@ -184,80 +184,71 @@ static int check_timer_create(int which)
return 0;
}
-int remain;
-__thread int got_signal;
+static pthread_t ctd_thread;
+static volatile int ctd_count, ctd_failed;
-static void *distribution_thread(void *arg)
+static void ctd_sighandler(int sig)
{
- while (__atomic_load_n(&remain, __ATOMIC_RELAXED));
- return NULL;
+ if (pthread_self() != ctd_thread)
+ ctd_failed = 1;
+ ctd_count--;
}
-static void distribution_handler(int nr)
+static void *ctd_thread_func(void *arg)
{
- if (!__atomic_exchange_n(&got_signal, 1, __ATOMIC_RELAXED))
- __atomic_fetch_sub(&remain, 1, __ATOMIC_RELAXED);
-}
-
-/*
- * Test that all running threads _eventually_ receive CLOCK_PROCESS_CPUTIME_ID
- * timer signals. This primarily tests that the kernel does not favour any one.
- */
-static int check_timer_distribution(void)
-{
- int err, i;
- timer_t id;
- const int nthreads = 10;
- pthread_t threads[nthreads];
struct itimerspec val = {
.it_value.tv_sec = 0,
.it_value.tv_nsec = 1000 * 1000,
.it_interval.tv_sec = 0,
.it_interval.tv_nsec = 1000 * 1000,
};
+ timer_t id;
- remain = nthreads + 1; /* worker threads + this thread */
- signal(SIGALRM, distribution_handler);
- err = timer_create(CLOCK_PROCESS_CPUTIME_ID, NULL, &id);
- if (err < 0) {
- ksft_perror("Can't create timer");
- return -1;
- }
- err = timer_settime(id, 0, &val, NULL);
- if (err < 0) {
- ksft_perror("Can't set timer");
- return -1;
- }
+ /* 1/10 seconds to ensure the leader sleeps */
+ usleep(10000);
- for (i = 0; i < nthreads; i++) {
- err = pthread_create(&threads[i], NULL, distribution_thread,
- NULL);
- if (err) {
- ksft_print_msg("Can't create thread: %s (%d)\n",
- strerror(errno), errno);
- return -1;
- }
- }
+ ctd_count = 100;
+ if (timer_create(CLOCK_PROCESS_CPUTIME_ID, NULL, &id))
+ return "Can't create timer\n";
+ if (timer_settime(id, 0, &val, NULL))
+ return "Can't set timer\n";
- /* Wait for all threads to receive the signal. */
- while (__atomic_load_n(&remain, __ATOMIC_RELAXED));
+ while (ctd_count > 0 && !ctd_failed)
+ ;
- for (i = 0; i < nthreads; i++) {
- err = pthread_join(threads[i], NULL);
- if (err) {
- ksft_print_msg("Can't join thread: %s (%d)\n",
- strerror(errno), errno);
- return -1;
- }
- }
+ if (timer_delete(id))
+ return "Can't delete timer\n";
- if (timer_delete(id)) {
- ksft_perror("Can't delete timer");
- return -1;
- }
+ return NULL;
+}
+
+/*
+ * Test that only the running thread receives the timer signal.
+ */
+static int check_timer_distribution(void)
+{
+ const char *errmsg;
- ksft_test_result_pass("check_timer_distribution\n");
+ signal(SIGALRM, ctd_sighandler);
+
+ errmsg = "Can't create thread\n";
+ if (pthread_create(&ctd_thread, NULL, ctd_thread_func, NULL))
+ goto err;
+
+ errmsg = "Can't join thread\n";
+ if (pthread_join(ctd_thread, (void **)&errmsg) || errmsg)
+ goto err;
+
+ if (!ctd_failed)
+ ksft_test_result_pass("check signal distribution\n");
+ else if (ksft_min_kernel_version(6, 3))
+ ksft_test_result_fail("check signal distribution\n");
+ else
+ ksft_test_result_skip("check signal distribution (old kernel)\n");
return 0;
+err:
+ ksft_print_msg(errmsg);
+ return -1;
}
int main(int argc, char **argv)
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 016/158] drm/amd/display: Do not recursively call manual trigger programming
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 015/158] selftests/timers/posix_timers: Reimplement check_timer_distribution() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 017/158] ceph: pass the mdsc to several helpers Greg Kroah-Hartman
` (150 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alvin Lee, Hamza Mahfooz,
Dillon Varone, Alex Deucher, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dillon Varone <dillon.varone@amd.com>
[ Upstream commit 953927587f37b731abdeabe46ad44a3b3ec67a52 ]
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c
index e817fa4efeee5..058dee76054ea 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_optc.c
@@ -236,9 +236,6 @@ static void optc32_setup_manual_trigger(struct timing_generator *optc)
OTG_V_TOTAL_MAX_SEL, 1,
OTG_FORCE_LOCK_ON_EVENT, 0,
OTG_SET_V_TOTAL_MIN_MASK, (1 << 1)); /* TRIGA */
-
- // Setup manual flow control for EOF via TRIG_A
- optc->funcs->setup_manual_trigger(optc);
}
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 017/158] ceph: pass the mdsc to several helpers
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 016/158] drm/amd/display: Do not recursively call manual trigger programming Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 018/158] ceph: rename _to_client() to _to_fs_client() Greg Kroah-Hartman
` (149 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiubo Li, Patrick Donnelly,
Milind Changire, Ilya Dryomov, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiubo Li <xiubli@redhat.com>
[ Upstream commit 197b7d792d6aead2e30d4b2c054ffabae2ed73dc ]
We will use the 'mdsc' to get the global_id in the following commits.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: b372e96bd0a3 ("ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ceph/caps.c | 15 ++++++++------
fs/ceph/debugfs.c | 4 ++--
fs/ceph/dir.c | 2 +-
fs/ceph/file.c | 2 +-
fs/ceph/mds_client.c | 39 +++++++++++++++++++++----------------
fs/ceph/mds_client.h | 3 ++-
fs/ceph/mdsmap.c | 3 ++-
fs/ceph/snap.c | 16 +++++++++------
fs/ceph/super.h | 3 ++-
include/linux/ceph/mdsmap.h | 5 ++++-
10 files changed, 55 insertions(+), 37 deletions(-)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index fc9f8f1a9036d..02f93437be353 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1178,7 +1178,8 @@ void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
}
}
-void ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
+void ceph_remove_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
+ bool queue_release)
{
struct ceph_inode_info *ci = cap->ci;
struct ceph_fs_client *fsc;
@@ -1342,6 +1343,8 @@ static void encode_cap_msg(struct ceph_msg *msg, struct cap_msg_args *arg)
*/
void __ceph_remove_caps(struct ceph_inode_info *ci)
{
+ struct inode *inode = &ci->netfs.inode;
+ struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
struct rb_node *p;
/* lock i_ceph_lock, because ceph_d_revalidate(..., LOOKUP_RCU)
@@ -1351,7 +1354,7 @@ void __ceph_remove_caps(struct ceph_inode_info *ci)
while (p) {
struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
p = rb_next(p);
- ceph_remove_cap(cap, true);
+ ceph_remove_cap(mdsc, cap, true);
}
spin_unlock(&ci->i_ceph_lock);
}
@@ -4000,7 +4003,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
goto out_unlock;
if (target < 0) {
- ceph_remove_cap(cap, false);
+ ceph_remove_cap(mdsc, cap, false);
goto out_unlock;
}
@@ -4035,7 +4038,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
change_auth_cap_ses(ci, tcap->session);
}
}
- ceph_remove_cap(cap, false);
+ ceph_remove_cap(mdsc, cap, false);
goto out_unlock;
} else if (tsession) {
/* add placeholder for the export tagert */
@@ -4052,7 +4055,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
spin_unlock(&mdsc->cap_dirty_lock);
}
- ceph_remove_cap(cap, false);
+ ceph_remove_cap(mdsc, cap, false);
goto out_unlock;
}
@@ -4165,7 +4168,7 @@ static void handle_cap_import(struct ceph_mds_client *mdsc,
ocap->mseq, mds, le32_to_cpu(ph->seq),
le32_to_cpu(ph->mseq));
}
- ceph_remove_cap(ocap, (ph->flags & CEPH_CAP_FLAG_RELEASE));
+ ceph_remove_cap(mdsc, ocap, (ph->flags & CEPH_CAP_FLAG_RELEASE));
}
*old_issued = issued;
diff --git a/fs/ceph/debugfs.c b/fs/ceph/debugfs.c
index 3904333fa6c38..2f1e7498cd745 100644
--- a/fs/ceph/debugfs.c
+++ b/fs/ceph/debugfs.c
@@ -81,7 +81,7 @@ static int mdsc_show(struct seq_file *s, void *p)
if (req->r_inode) {
seq_printf(s, " #%llx", ceph_ino(req->r_inode));
} else if (req->r_dentry) {
- path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
+ path = ceph_mdsc_build_path(mdsc, req->r_dentry, &pathlen,
&pathbase, 0);
if (IS_ERR(path))
path = NULL;
@@ -100,7 +100,7 @@ static int mdsc_show(struct seq_file *s, void *p)
}
if (req->r_old_dentry) {
- path = ceph_mdsc_build_path(req->r_old_dentry, &pathlen,
+ path = ceph_mdsc_build_path(mdsc, req->r_old_dentry, &pathlen,
&pathbase, 0);
if (IS_ERR(path))
path = NULL;
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 854cbdd666619..fff5cb2df9a89 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -1226,7 +1226,7 @@ static void ceph_async_unlink_cb(struct ceph_mds_client *mdsc,
if (result) {
int pathlen = 0;
u64 base = 0;
- char *path = ceph_mdsc_build_path(dentry, &pathlen,
+ char *path = ceph_mdsc_build_path(mdsc, dentry, &pathlen,
&base, 0);
/* mark error on parent + clear complete */
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index bdd0a3b894b7b..472e86454488d 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -574,7 +574,7 @@ static void ceph_async_create_cb(struct ceph_mds_client *mdsc,
if (result) {
int pathlen = 0;
u64 base = 0;
- char *path = ceph_mdsc_build_path(req->r_dentry, &pathlen,
+ char *path = ceph_mdsc_build_path(mdsc, req->r_dentry, &pathlen,
&base, 0);
pr_warn("async create failure path=(%llx)%s result=%d!\n",
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 6d76fd0f704a6..750dfe512aca0 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2126,6 +2126,7 @@ static bool drop_negative_children(struct dentry *dentry)
*/
static int trim_caps_cb(struct inode *inode, int mds, void *arg)
{
+ struct ceph_mds_client *mdsc = ceph_sb_to_mdsc(inode->i_sb);
int *remaining = arg;
struct ceph_inode_info *ci = ceph_inode(inode);
int used, wanted, oissued, mine;
@@ -2173,7 +2174,7 @@ static int trim_caps_cb(struct inode *inode, int mds, void *arg)
if (oissued) {
/* we aren't the only cap.. just remove us */
- ceph_remove_cap(cap, true);
+ ceph_remove_cap(mdsc, cap, true);
(*remaining)--;
} else {
struct dentry *dentry;
@@ -2588,6 +2589,7 @@ static u8 *get_fscrypt_altname(const struct ceph_mds_request *req, u32 *plen)
/**
* ceph_mdsc_build_path - build a path string to a given dentry
+ * @mdsc: mds client
* @dentry: dentry to which path should be built
* @plen: returned length of string
* @pbase: returned base inode number
@@ -2607,8 +2609,8 @@ static u8 *get_fscrypt_altname(const struct ceph_mds_request *req, u32 *plen)
* Encode hidden .snap dirs as a double /, i.e.
* foo/.snap/bar -> foo//bar
*/
-char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *pbase,
- int for_wire)
+char *ceph_mdsc_build_path(struct ceph_mds_client *mdsc, struct dentry *dentry,
+ int *plen, u64 *pbase, int for_wire)
{
struct dentry *cur;
struct inode *inode;
@@ -2726,9 +2728,9 @@ char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *pbase,
return path + pos;
}
-static int build_dentry_path(struct dentry *dentry, struct inode *dir,
- const char **ppath, int *ppathlen, u64 *pino,
- bool *pfreepath, bool parent_locked)
+static int build_dentry_path(struct ceph_mds_client *mdsc, struct dentry *dentry,
+ struct inode *dir, const char **ppath, int *ppathlen,
+ u64 *pino, bool *pfreepath, bool parent_locked)
{
char *path;
@@ -2744,7 +2746,7 @@ static int build_dentry_path(struct dentry *dentry, struct inode *dir,
return 0;
}
rcu_read_unlock();
- path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
+ path = ceph_mdsc_build_path(mdsc, dentry, ppathlen, pino, 1);
if (IS_ERR(path))
return PTR_ERR(path);
*ppath = path;
@@ -2756,6 +2758,7 @@ static int build_inode_path(struct inode *inode,
const char **ppath, int *ppathlen, u64 *pino,
bool *pfreepath)
{
+ struct ceph_mds_client *mdsc = ceph_sb_to_mdsc(inode->i_sb);
struct dentry *dentry;
char *path;
@@ -2765,7 +2768,7 @@ static int build_inode_path(struct inode *inode,
return 0;
}
dentry = d_find_alias(inode);
- path = ceph_mdsc_build_path(dentry, ppathlen, pino, 1);
+ path = ceph_mdsc_build_path(mdsc, dentry, ppathlen, pino, 1);
dput(dentry);
if (IS_ERR(path))
return PTR_ERR(path);
@@ -2778,10 +2781,11 @@ static int build_inode_path(struct inode *inode,
* request arguments may be specified via an inode *, a dentry *, or
* an explicit ino+path.
*/
-static int set_request_path_attr(struct inode *rinode, struct dentry *rdentry,
- struct inode *rdiri, const char *rpath,
- u64 rino, const char **ppath, int *pathlen,
- u64 *ino, bool *freepath, bool parent_locked)
+static int set_request_path_attr(struct ceph_mds_client *mdsc, struct inode *rinode,
+ struct dentry *rdentry, struct inode *rdiri,
+ const char *rpath, u64 rino, const char **ppath,
+ int *pathlen, u64 *ino, bool *freepath,
+ bool parent_locked)
{
int r = 0;
@@ -2790,7 +2794,7 @@ static int set_request_path_attr(struct inode *rinode, struct dentry *rdentry,
dout(" inode %p %llx.%llx\n", rinode, ceph_ino(rinode),
ceph_snap(rinode));
} else if (rdentry) {
- r = build_dentry_path(rdentry, rdiri, ppath, pathlen, ino,
+ r = build_dentry_path(mdsc, rdentry, rdiri, ppath, pathlen, ino,
freepath, parent_locked);
dout(" dentry %p %llx/%.*s\n", rdentry, *ino, *pathlen,
*ppath);
@@ -2877,7 +2881,7 @@ static struct ceph_msg *create_request_message(struct ceph_mds_session *session,
bool old_version = !test_bit(CEPHFS_FEATURE_32BITS_RETRY_FWD,
&session->s_features);
- ret = set_request_path_attr(req->r_inode, req->r_dentry,
+ ret = set_request_path_attr(mdsc, req->r_inode, req->r_dentry,
req->r_parent, req->r_path1, req->r_ino1.ino,
&path1, &pathlen1, &ino1, &freepath1,
test_bit(CEPH_MDS_R_PARENT_LOCKED,
@@ -2891,7 +2895,7 @@ static struct ceph_msg *create_request_message(struct ceph_mds_session *session,
if (req->r_old_dentry &&
!(req->r_old_dentry->d_flags & DCACHE_DISCONNECTED))
old_dentry = req->r_old_dentry;
- ret = set_request_path_attr(NULL, old_dentry,
+ ret = set_request_path_attr(mdsc, NULL, old_dentry,
req->r_old_dentry_dir,
req->r_path2, req->r_ino2.ino,
&path2, &pathlen2, &ino2, &freepath2, true);
@@ -4290,6 +4294,7 @@ static struct dentry* d_find_primary(struct inode *inode)
*/
static int reconnect_caps_cb(struct inode *inode, int mds, void *arg)
{
+ struct ceph_mds_client *mdsc = ceph_sb_to_mdsc(inode->i_sb);
union {
struct ceph_mds_cap_reconnect v2;
struct ceph_mds_cap_reconnect_v1 v1;
@@ -4307,7 +4312,7 @@ static int reconnect_caps_cb(struct inode *inode, int mds, void *arg)
dentry = d_find_primary(inode);
if (dentry) {
/* set pathbase to parent dir when msg_version >= 2 */
- path = ceph_mdsc_build_path(dentry, &pathlen, &pathbase,
+ path = ceph_mdsc_build_path(mdsc, dentry, &pathlen, &pathbase,
recon_state->msg_version >= 2);
dput(dentry);
if (IS_ERR(path)) {
@@ -5662,7 +5667,7 @@ void ceph_mdsc_handle_mdsmap(struct ceph_mds_client *mdsc, struct ceph_msg *msg)
return;
}
- newmap = ceph_mdsmap_decode(&p, end, ceph_msgr2(mdsc->fsc->client));
+ newmap = ceph_mdsmap_decode(mdsc, &p, end, ceph_msgr2(mdsc->fsc->client));
if (IS_ERR(newmap)) {
err = PTR_ERR(newmap);
goto bad_unlock;
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index 5a3714bdd64a8..d930eb79dc380 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -581,7 +581,8 @@ static inline void ceph_mdsc_free_path(char *path, int len)
__putname(path - (PATH_MAX - 1 - len));
}
-extern char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
+extern char *ceph_mdsc_build_path(struct ceph_mds_client *mdsc,
+ struct dentry *dentry, int *plen, u64 *base,
int for_wire);
extern void __ceph_mdsc_drop_dentry_lease(struct dentry *dentry);
diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
index 3bb3b610d403e..66afb18df76b2 100644
--- a/fs/ceph/mdsmap.c
+++ b/fs/ceph/mdsmap.c
@@ -114,7 +114,8 @@ static int __decode_and_drop_compat_set(void **p, void* end)
* Ignore any fields we don't care about (there are quite a few of
* them).
*/
-struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
+struct ceph_mdsmap *ceph_mdsmap_decode(struct ceph_mds_client *mdsc, void **p,
+ void *end, bool msgr2)
{
struct ceph_mdsmap *m;
const void *start = *p;
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 813f21add992c..55090e6c99672 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -329,7 +329,8 @@ static int cmpu64_rev(const void *a, const void *b)
/*
* build the snap context for a given realm.
*/
-static int build_snap_context(struct ceph_snap_realm *realm,
+static int build_snap_context(struct ceph_mds_client *mdsc,
+ struct ceph_snap_realm *realm,
struct list_head *realm_queue,
struct list_head *dirty_realms)
{
@@ -425,7 +426,8 @@ static int build_snap_context(struct ceph_snap_realm *realm,
/*
* rebuild snap context for the given realm and all of its children.
*/
-static void rebuild_snap_realms(struct ceph_snap_realm *realm,
+static void rebuild_snap_realms(struct ceph_mds_client *mdsc,
+ struct ceph_snap_realm *realm,
struct list_head *dirty_realms)
{
LIST_HEAD(realm_queue);
@@ -451,7 +453,8 @@ static void rebuild_snap_realms(struct ceph_snap_realm *realm,
continue;
}
- last = build_snap_context(_realm, &realm_queue, dirty_realms);
+ last = build_snap_context(mdsc, _realm, &realm_queue,
+ dirty_realms);
dout("%s %llx %p, %s\n", __func__, _realm->ino, _realm,
last > 0 ? "is deferred" : !last ? "succeeded" : "failed");
@@ -708,7 +711,8 @@ int __ceph_finish_cap_snap(struct ceph_inode_info *ci,
* Queue cap_snaps for snap writeback for this realm and its children.
* Called under snap_rwsem, so realm topology won't change.
*/
-static void queue_realm_cap_snaps(struct ceph_snap_realm *realm)
+static void queue_realm_cap_snaps(struct ceph_mds_client *mdsc,
+ struct ceph_snap_realm *realm)
{
struct ceph_inode_info *ci;
struct inode *lastinode = NULL;
@@ -855,7 +859,7 @@ int ceph_update_snap_trace(struct ceph_mds_client *mdsc,
/* rebuild_snapcs when we reach the _end_ (root) of the trace */
if (realm_to_rebuild && p >= e)
- rebuild_snap_realms(realm_to_rebuild, &dirty_realms);
+ rebuild_snap_realms(mdsc, realm_to_rebuild, &dirty_realms);
if (!first_realm)
first_realm = realm;
@@ -873,7 +877,7 @@ int ceph_update_snap_trace(struct ceph_mds_client *mdsc,
realm = list_first_entry(&dirty_realms, struct ceph_snap_realm,
dirty_item);
list_del_init(&realm->dirty_item);
- queue_realm_cap_snaps(realm);
+ queue_realm_cap_snaps(mdsc, realm);
}
if (realm_ret)
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 51c7f2b14f6f8..09c262dd5bd36 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -1223,7 +1223,8 @@ extern void ceph_add_cap(struct inode *inode,
unsigned cap, unsigned seq, u64 realmino, int flags,
struct ceph_cap **new_cap);
extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
-extern void ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
+extern void ceph_remove_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
+ bool queue_release);
extern void __ceph_remove_caps(struct ceph_inode_info *ci);
extern void ceph_put_cap(struct ceph_mds_client *mdsc,
struct ceph_cap *cap);
diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h
index fcc95bff72a57..1f2171dd01bfa 100644
--- a/include/linux/ceph/mdsmap.h
+++ b/include/linux/ceph/mdsmap.h
@@ -5,6 +5,8 @@
#include <linux/bug.h>
#include <linux/ceph/types.h>
+struct ceph_mds_client;
+
/*
* mds map - describe servers in the mds cluster.
*
@@ -69,7 +71,8 @@ static inline bool ceph_mdsmap_is_laggy(struct ceph_mdsmap *m, int w)
}
extern int ceph_mdsmap_get_random_mds(struct ceph_mdsmap *m);
-struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2);
+struct ceph_mdsmap *ceph_mdsmap_decode(struct ceph_mds_client *mdsc, void **p,
+ void *end, bool msgr2);
extern void ceph_mdsmap_destroy(struct ceph_mdsmap *m);
extern bool ceph_mdsmap_is_cluster_available(struct ceph_mdsmap *m);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 018/158] ceph: rename _to_client() to _to_fs_client()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 017/158] ceph: pass the mdsc to several helpers Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 019/158] ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE Greg Kroah-Hartman
` (148 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiubo Li, Patrick Donnelly,
Milind Changire, Ilya Dryomov, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiubo Li <xiubli@redhat.com>
[ Upstream commit 5995d90d2d19f337df6a50bcf4699ef053214dac ]
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: b372e96bd0a3 ("ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ceph/addr.c | 20 ++++++++++----------
fs/ceph/cache.c | 2 +-
fs/ceph/caps.c | 40 ++++++++++++++++++++--------------------
fs/ceph/crypto.c | 2 +-
fs/ceph/dir.c | 22 +++++++++++-----------
fs/ceph/export.c | 10 +++++-----
fs/ceph/file.c | 24 ++++++++++++------------
fs/ceph/inode.c | 14 +++++++-------
fs/ceph/ioctl.c | 8 ++++----
fs/ceph/mds_client.c | 2 +-
fs/ceph/snap.c | 2 +-
fs/ceph/super.c | 22 +++++++++++-----------
fs/ceph/super.h | 10 +++++-----
fs/ceph/xattr.c | 12 ++++++------
14 files changed, 95 insertions(+), 95 deletions(-)
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index f4863078f7fe5..28fa05a9d4d2f 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -229,7 +229,7 @@ static void ceph_netfs_expand_readahead(struct netfs_io_request *rreq)
static bool ceph_netfs_clamp_length(struct netfs_io_subrequest *subreq)
{
struct inode *inode = subreq->rreq->inode;
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_inode_info *ci = ceph_inode(inode);
u64 objno, objoff;
u32 xlen;
@@ -244,7 +244,7 @@ static bool ceph_netfs_clamp_length(struct netfs_io_subrequest *subreq)
static void finish_netfs_read(struct ceph_osd_request *req)
{
struct inode *inode = req->r_inode;
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_data *osd_data = osd_req_op_extent_osd_data(req, 0);
struct netfs_io_subrequest *subreq = req->r_priv;
struct ceph_osd_req_op *op = &req->r_ops[0];
@@ -348,7 +348,7 @@ static void ceph_netfs_issue_read(struct netfs_io_subrequest *subreq)
struct netfs_io_request *rreq = subreq->rreq;
struct inode *inode = rreq->inode;
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_request *req = NULL;
struct ceph_vino vino = ceph_vino(inode);
struct iov_iter iter;
@@ -658,7 +658,7 @@ static int writepage_nounlock(struct page *page, struct writeback_control *wbc)
struct folio *folio = page_folio(page);
struct inode *inode = page->mapping->host;
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_snap_context *snapc, *oldest;
loff_t page_off = page_offset(page);
int err;
@@ -803,7 +803,7 @@ static int ceph_writepage(struct page *page, struct writeback_control *wbc)
ihold(inode);
if (wbc->sync_mode == WB_SYNC_NONE &&
- ceph_inode_to_client(inode)->write_congested)
+ ceph_inode_to_fs_client(inode)->write_congested)
return AOP_WRITEPAGE_ACTIVATE;
wait_on_page_fscache(page);
@@ -836,7 +836,7 @@ static void writepages_finish(struct ceph_osd_request *req)
int rc = req->r_result;
struct ceph_snap_context *snapc = req->r_snapc;
struct address_space *mapping = inode->i_mapping;
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
unsigned int len = 0;
bool remove_page;
@@ -926,7 +926,7 @@ static int ceph_writepages_start(struct address_space *mapping,
{
struct inode *inode = mapping->host;
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_vino vino = ceph_vino(inode);
pgoff_t index, start_index, end = -1;
struct ceph_snap_context *snapc = NULL, *last_snapc = NULL, *pgsnapc;
@@ -1823,7 +1823,7 @@ int ceph_uninline_data(struct file *file)
{
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_request *req = NULL;
struct ceph_cap_flush *prealloc_cf = NULL;
struct folio *folio = NULL;
@@ -1977,7 +1977,7 @@ enum {
static int __ceph_pool_perm_get(struct ceph_inode_info *ci,
s64 pool, struct ceph_string *pool_ns)
{
- struct ceph_fs_client *fsc = ceph_inode_to_client(&ci->netfs.inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(&ci->netfs.inode);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_osd_request *rd_req = NULL, *wr_req = NULL;
struct rb_node **p, *parent;
@@ -2168,7 +2168,7 @@ int ceph_pool_perm_check(struct inode *inode, int need)
return 0;
}
- if (ceph_test_mount_opt(ceph_inode_to_client(inode),
+ if (ceph_test_mount_opt(ceph_inode_to_fs_client(inode),
NOPOOLPERM))
return 0;
diff --git a/fs/ceph/cache.c b/fs/ceph/cache.c
index de1dee46d3df7..930fbd54d2c8c 100644
--- a/fs/ceph/cache.c
+++ b/fs/ceph/cache.c
@@ -15,7 +15,7 @@
void ceph_fscache_register_inode_cookie(struct inode *inode)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
/* No caching for filesystem? */
if (!fsc->fscache)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 02f93437be353..00045b8eadd14 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -635,7 +635,7 @@ void ceph_add_cap(struct inode *inode,
unsigned seq, unsigned mseq, u64 realmino, int flags,
struct ceph_cap **new_cap)
{
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_cap *cap;
int mds = session->s_mds;
@@ -922,7 +922,7 @@ int __ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int touch)
int __ceph_caps_issued_mask_metric(struct ceph_inode_info *ci, int mask,
int touch)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(ci->netfs.inode.i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(ci->netfs.inode.i_sb);
int r;
r = __ceph_caps_issued_mask(ci, mask, touch);
@@ -996,7 +996,7 @@ int __ceph_caps_file_wanted(struct ceph_inode_info *ci)
const int WR_SHIFT = ffs(CEPH_FILE_MODE_WR);
const int LAZY_SHIFT = ffs(CEPH_FILE_MODE_LAZY);
struct ceph_mount_options *opt =
- ceph_inode_to_client(&ci->netfs.inode)->mount_options;
+ ceph_inode_to_fs_client(&ci->netfs.inode)->mount_options;
unsigned long used_cutoff = jiffies - opt->caps_wanted_delay_max * HZ;
unsigned long idle_cutoff = jiffies - opt->caps_wanted_delay_min * HZ;
@@ -1121,7 +1121,7 @@ void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
dout("__ceph_remove_cap %p from %p\n", cap, &ci->netfs.inode);
- mdsc = ceph_inode_to_client(&ci->netfs.inode)->mdsc;
+ mdsc = ceph_inode_to_fs_client(&ci->netfs.inode)->mdsc;
/* remove from inode's cap rbtree, and clear auth cap */
rb_erase(&cap->ci_node, &ci->i_caps);
@@ -1192,7 +1192,7 @@ void ceph_remove_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
lockdep_assert_held(&ci->i_ceph_lock);
- fsc = ceph_inode_to_client(&ci->netfs.inode);
+ fsc = ceph_inode_to_fs_client(&ci->netfs.inode);
WARN_ON_ONCE(ci->i_auth_cap == cap &&
!list_empty(&ci->i_dirty_item) &&
!fsc->blocklisted &&
@@ -1344,7 +1344,7 @@ static void encode_cap_msg(struct ceph_msg *msg, struct cap_msg_args *arg)
void __ceph_remove_caps(struct ceph_inode_info *ci)
{
struct inode *inode = &ci->netfs.inode;
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
struct rb_node *p;
/* lock i_ceph_lock, because ceph_d_revalidate(..., LOOKUP_RCU)
@@ -1689,7 +1689,7 @@ void ceph_flush_snaps(struct ceph_inode_info *ci,
struct ceph_mds_session **psession)
{
struct inode *inode = &ci->netfs.inode;
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
struct ceph_mds_session *session = NULL;
bool need_put = false;
int mds;
@@ -1754,7 +1754,7 @@ int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask,
struct ceph_cap_flush **pcf)
{
struct ceph_mds_client *mdsc =
- ceph_sb_to_client(ci->netfs.inode.i_sb)->mdsc;
+ ceph_sb_to_fs_client(ci->netfs.inode.i_sb)->mdsc;
struct inode *inode = &ci->netfs.inode;
int was = ci->i_dirty_caps;
int dirty = 0;
@@ -1877,7 +1877,7 @@ static u64 __mark_caps_flushing(struct inode *inode,
struct ceph_mds_session *session, bool wake,
u64 *oldest_flush_tid)
{
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_cap_flush *cf = NULL;
int flushing;
@@ -2236,7 +2236,7 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags)
*/
static int try_flush_caps(struct inode *inode, u64 *ptid)
{
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_inode_info *ci = ceph_inode(inode);
int flushing = 0;
u64 flush_tid = 0, oldest_flush_tid = 0;
@@ -2314,7 +2314,7 @@ static int caps_are_flushed(struct inode *inode, u64 flush_tid)
*/
static int flush_mdlog_and_wait_inode_unsafe_requests(struct inode *inode)
{
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_mds_request *req1 = NULL, *req2 = NULL;
int ret, err = 0;
@@ -2497,7 +2497,7 @@ int ceph_write_inode(struct inode *inode, struct writeback_control *wbc)
caps_are_flushed(inode, flush_tid));
} else {
struct ceph_mds_client *mdsc =
- ceph_sb_to_client(inode->i_sb)->mdsc;
+ ceph_sb_to_fs_client(inode->i_sb)->mdsc;
spin_lock(&ci->i_ceph_lock);
if (__ceph_caps_dirty(ci))
@@ -2750,7 +2750,7 @@ static int try_get_cap_refs(struct inode *inode, int need, int want,
loff_t endoff, int flags, int *got)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
int ret = 0;
int have, implemented;
bool snap_rwsem_locked = false;
@@ -2968,7 +2968,7 @@ int __ceph_get_caps(struct inode *inode, struct ceph_file_info *fi, int need,
int want, loff_t endoff, int *got)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
int ret, _got, flags;
ret = ceph_pool_perm_check(inode, need);
@@ -3731,7 +3731,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid,
__releases(ci->i_ceph_lock)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_cap_flush *cf, *tmp_cf;
LIST_HEAD(to_remove);
unsigned seq = le32_to_cpu(m->seq);
@@ -3837,7 +3837,7 @@ void __ceph_remove_capsnap(struct inode *inode, struct ceph_cap_snap *capsnap,
bool *wake_ci, bool *wake_mdsc)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
bool ret;
lockdep_assert_held(&ci->i_ceph_lock);
@@ -3881,7 +3881,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid,
struct ceph_mds_session *session)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
u64 follows = le64_to_cpu(m->snap_follows);
struct ceph_cap_snap *capsnap = NULL, *iter;
bool wake_ci = false;
@@ -3973,7 +3973,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex,
struct ceph_mds_cap_peer *ph,
struct ceph_mds_session *session)
{
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
struct ceph_mds_session *tsession = NULL;
struct ceph_cap *cap, *tcap, *new_cap = NULL;
struct ceph_inode_info *ci = ceph_inode(inode);
@@ -4676,7 +4676,7 @@ int ceph_drop_caps_for_unlink(struct inode *inode)
if (__ceph_caps_dirty(ci)) {
struct ceph_mds_client *mdsc =
- ceph_inode_to_client(inode)->mdsc;
+ ceph_inode_to_fs_client(inode)->mdsc;
__cap_delay_requeue_front(mdsc, ci);
}
}
@@ -4856,7 +4856,7 @@ static int remove_capsnaps(struct ceph_mds_client *mdsc, struct inode *inode)
int ceph_purge_inode_cap(struct inode *inode, struct ceph_cap *cap, bool *invalidate)
{
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_inode_info *ci = ceph_inode(inode);
bool is_auth;
diff --git a/fs/ceph/crypto.c b/fs/ceph/crypto.c
index 5b5112c784629..08c3856107316 100644
--- a/fs/ceph/crypto.c
+++ b/fs/ceph/crypto.c
@@ -129,7 +129,7 @@ static bool ceph_crypt_empty_dir(struct inode *inode)
static const union fscrypt_policy *ceph_get_dummy_policy(struct super_block *sb)
{
- return ceph_sb_to_client(sb)->fsc_dummy_enc_policy.policy;
+ return ceph_sb_to_fs_client(sb)->fsc_dummy_enc_policy.policy;
}
static struct fscrypt_operations ceph_fscrypt_ops = {
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index fff5cb2df9a89..1395b71df5ccc 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -310,7 +310,7 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx)
struct ceph_dir_file_info *dfi = file->private_data;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_mds_client *mdsc = fsc->mdsc;
int i;
int err;
@@ -703,7 +703,7 @@ static loff_t ceph_dir_llseek(struct file *file, loff_t offset, int whence)
struct dentry *ceph_handle_snapdir(struct ceph_mds_request *req,
struct dentry *dentry)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(dentry->d_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dentry->d_sb);
struct inode *parent = d_inode(dentry->d_parent); /* we hold i_rwsem */
/* .snap dir? */
@@ -771,7 +771,7 @@ static bool is_root_ceph_dentry(struct inode *inode, struct dentry *dentry)
static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry,
unsigned int flags)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dir->i_sb);
struct ceph_mds_client *mdsc = ceph_sb_to_mdsc(dir->i_sb);
struct ceph_mds_request *req;
int op;
@@ -1199,7 +1199,7 @@ static void ceph_async_unlink_cb(struct ceph_mds_client *mdsc,
struct ceph_mds_request *req)
{
struct dentry *dentry = req->r_dentry;
- struct ceph_fs_client *fsc = ceph_sb_to_client(dentry->d_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dentry->d_sb);
struct ceph_dentry_info *di = ceph_dentry(dentry);
int result = req->r_err ? req->r_err :
le32_to_cpu(req->r_reply_info.head->result);
@@ -1290,7 +1290,7 @@ static int get_caps_for_async_unlink(struct inode *dir, struct dentry *dentry)
*/
static int ceph_unlink(struct inode *dir, struct dentry *dentry)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct inode *inode = d_inode(dentry);
struct ceph_mds_request *req;
@@ -1469,7 +1469,7 @@ void __ceph_dentry_lease_touch(struct ceph_dentry_info *di)
return;
}
- mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
+ mdsc = ceph_sb_to_fs_client(dn->d_sb)->mdsc;
spin_lock(&mdsc->dentry_list_lock);
list_move_tail(&di->lease_list, &mdsc->dentry_leases);
spin_unlock(&mdsc->dentry_list_lock);
@@ -1516,7 +1516,7 @@ void __ceph_dentry_dir_lease_touch(struct ceph_dentry_info *di)
return;
}
- mdsc = ceph_sb_to_client(dn->d_sb)->mdsc;
+ mdsc = ceph_sb_to_fs_client(dn->d_sb)->mdsc;
spin_lock(&mdsc->dentry_list_lock);
__dentry_dir_lease_touch(mdsc, di),
spin_unlock(&mdsc->dentry_list_lock);
@@ -1530,7 +1530,7 @@ static void __dentry_lease_unlist(struct ceph_dentry_info *di)
if (list_empty(&di->lease_list))
return;
- mdsc = ceph_sb_to_client(di->dentry->d_sb)->mdsc;
+ mdsc = ceph_sb_to_fs_client(di->dentry->d_sb)->mdsc;
spin_lock(&mdsc->dentry_list_lock);
list_del_init(&di->lease_list);
spin_unlock(&mdsc->dentry_list_lock);
@@ -1888,7 +1888,7 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags)
dentry, inode, ceph_dentry(dentry)->offset,
!!(dentry->d_flags & DCACHE_NOKEY_NAME));
- mdsc = ceph_sb_to_client(dir->i_sb)->mdsc;
+ mdsc = ceph_sb_to_fs_client(dir->i_sb)->mdsc;
/* always trust cached snapped dentries, snapdir dentry */
if (ceph_snap(dir) != CEPH_NOSNAP) {
@@ -1995,7 +1995,7 @@ static int ceph_d_delete(const struct dentry *dentry)
static void ceph_d_release(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
- struct ceph_fs_client *fsc = ceph_sb_to_client(dentry->d_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dentry->d_sb);
dout("d_release %p\n", dentry);
@@ -2064,7 +2064,7 @@ static ssize_t ceph_read_dir(struct file *file, char __user *buf, size_t size,
int left;
const int bufsize = 1024;
- if (!ceph_test_mount_opt(ceph_sb_to_client(inode->i_sb), DIRSTAT))
+ if (!ceph_test_mount_opt(ceph_sb_to_fs_client(inode->i_sb), DIRSTAT))
return -EISDIR;
if (!dfi->dir_info) {
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index 8559990a59a5c..52c4daf2447d3 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -123,7 +123,7 @@ static int ceph_encode_fh(struct inode *inode, u32 *rawfh, int *max_len,
static struct inode *__lookup_inode(struct super_block *sb, u64 ino)
{
- struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(sb)->mdsc;
struct inode *inode;
struct ceph_vino vino;
int err;
@@ -205,7 +205,7 @@ static struct dentry *__snapfh_to_dentry(struct super_block *sb,
struct ceph_nfs_snapfh *sfh,
bool want_parent)
{
- struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(sb)->mdsc;
struct ceph_mds_request *req;
struct inode *inode;
struct ceph_vino vino;
@@ -317,7 +317,7 @@ static struct dentry *ceph_fh_to_dentry(struct super_block *sb,
static struct dentry *__get_parent(struct super_block *sb,
struct dentry *child, u64 ino)
{
- struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(sb)->mdsc;
struct ceph_mds_request *req;
struct inode *inode;
int mask;
@@ -439,7 +439,7 @@ static int __get_snap_name(struct dentry *parent, char *name,
{
struct inode *inode = d_inode(child);
struct inode *dir = d_inode(parent);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_mds_request *req = NULL;
char *last_name = NULL;
unsigned next_offset = 2;
@@ -544,7 +544,7 @@ static int ceph_get_name(struct dentry *parent, char *name,
if (ceph_snap(inode) != CEPH_NOSNAP)
return __get_snap_name(parent, name, child);
- mdsc = ceph_inode_to_client(inode)->mdsc;
+ mdsc = ceph_inode_to_fs_client(inode)->mdsc;
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_LOOKUPNAME,
USE_ANY_MDS);
if (IS_ERR(req))
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 472e86454488d..1e0497295662a 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -200,7 +200,7 @@ static int ceph_init_file_info(struct inode *inode, struct file *file,
{
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_mount_options *opt =
- ceph_inode_to_client(&ci->netfs.inode)->mount_options;
+ ceph_inode_to_fs_client(&ci->netfs.inode)->mount_options;
struct ceph_file_info *fi;
int ret;
@@ -234,7 +234,7 @@ static int ceph_init_file_info(struct inode *inode, struct file *file,
spin_lock_init(&fi->rw_contexts_lock);
INIT_LIST_HEAD(&fi->rw_contexts);
- fi->filp_gen = READ_ONCE(ceph_inode_to_client(inode)->filp_gen);
+ fi->filp_gen = READ_ONCE(ceph_inode_to_fs_client(inode)->filp_gen);
if ((file->f_mode & FMODE_WRITE) && ceph_has_inline_data(ci)) {
ret = ceph_uninline_data(file);
@@ -352,7 +352,7 @@ int ceph_renew_caps(struct inode *inode, int fmode)
int ceph_open(struct inode *inode, struct file *file)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(inode->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_mds_request *req;
struct ceph_file_info *fi = file->private_data;
@@ -730,7 +730,7 @@ static int ceph_finish_async_create(struct inode *dir, struct inode *inode,
int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
struct file *file, unsigned flags, umode_t mode)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_mds_request *req;
struct inode *new_inode = NULL;
@@ -962,7 +962,7 @@ ssize_t __ceph_sync_read(struct inode *inode, loff_t *ki_pos,
u64 *last_objver)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_client *osdc = &fsc->client->osdc;
ssize_t ret;
u64 off = *ki_pos;
@@ -1259,7 +1259,7 @@ static void ceph_aio_complete_req(struct ceph_osd_request *req)
if (aio_work) {
INIT_WORK(&aio_work->work, ceph_aio_retry_work);
aio_work->req = req;
- queue_work(ceph_inode_to_client(inode)->inode_wq,
+ queue_work(ceph_inode_to_fs_client(inode)->inode_wq,
&aio_work->work);
return;
}
@@ -1389,7 +1389,7 @@ ceph_direct_read_write(struct kiocb *iocb, struct iov_iter *iter,
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_client_metric *metric = &fsc->mdsc->metric;
struct ceph_vino vino;
struct ceph_osd_request *req;
@@ -1613,7 +1613,7 @@ ceph_sync_write(struct kiocb *iocb, struct iov_iter *from, loff_t pos,
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_client *osdc = &fsc->client->osdc;
struct ceph_osd_request *req;
struct page **pages;
@@ -2231,7 +2231,7 @@ static ssize_t ceph_write_iter(struct kiocb *iocb, struct iov_iter *from)
struct ceph_file_info *fi = file->private_data;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_client *osdc = &fsc->client->osdc;
struct ceph_cap_flush *prealloc_cf;
ssize_t count, written = 0;
@@ -2465,7 +2465,7 @@ static int ceph_zero_partial_object(struct inode *inode,
loff_t offset, loff_t *length)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_osd_request *req;
int ret = 0;
loff_t zero = 0;
@@ -2848,7 +2848,7 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
struct ceph_inode_info *src_ci = ceph_inode(src_inode);
struct ceph_inode_info *dst_ci = ceph_inode(dst_inode);
struct ceph_cap_flush *prealloc_cf;
- struct ceph_fs_client *src_fsc = ceph_inode_to_client(src_inode);
+ struct ceph_fs_client *src_fsc = ceph_inode_to_fs_client(src_inode);
loff_t size;
ssize_t ret = -EIO, bytes;
u64 src_objnum, dst_objnum, src_objoff, dst_objoff;
@@ -2856,7 +2856,7 @@ static ssize_t __ceph_copy_file_range(struct file *src_file, loff_t src_off,
int src_got = 0, dst_got = 0, err, dirty;
if (src_inode->i_sb != dst_inode->i_sb) {
- struct ceph_fs_client *dst_fsc = ceph_inode_to_client(dst_inode);
+ struct ceph_fs_client *dst_fsc = ceph_inode_to_fs_client(dst_inode);
if (ceph_fsid_compare(&src_fsc->client->fsid,
&dst_fsc->client->fsid)) {
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index b79100f720b38..db6977c15c282 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1489,7 +1489,7 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req)
struct ceph_mds_reply_info_parsed *rinfo = &req->r_reply_info;
struct inode *in = NULL;
struct ceph_vino tvino, dvino;
- struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
int err = 0;
dout("fill_trace %p is_dentry %d is_target %d\n", req,
@@ -2079,7 +2079,7 @@ bool ceph_inode_set_size(struct inode *inode, loff_t size)
void ceph_queue_inode_work(struct inode *inode, int work_bit)
{
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
struct ceph_inode_info *ci = ceph_inode(inode);
set_bit(work_bit, &ci->i_work_mask);
@@ -2427,7 +2427,7 @@ int __ceph_setattr(struct inode *inode, struct iattr *attr,
struct ceph_inode_info *ci = ceph_inode(inode);
unsigned int ia_valid = attr->ia_valid;
struct ceph_mds_request *req;
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_cap_flush *prealloc_cf;
loff_t isize = i_size_read(inode);
int issued;
@@ -2740,7 +2740,7 @@ int ceph_setattr(struct mnt_idmap *idmap, struct dentry *dentry,
struct iattr *attr)
{
struct inode *inode = d_inode(dentry);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
int err;
if (ceph_snap(inode) != CEPH_NOSNAP)
@@ -2810,7 +2810,7 @@ int ceph_try_to_choose_auth_mds(struct inode *inode, int mask)
int __ceph_do_getattr(struct inode *inode, struct page *locked_page,
int mask, bool force)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(inode->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_mds_request *req;
int mode;
@@ -2856,7 +2856,7 @@ int __ceph_do_getattr(struct inode *inode, struct page *locked_page,
int ceph_do_getvxattr(struct inode *inode, const char *name, void *value,
size_t size)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(inode->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
struct ceph_mds_request *req;
int mode = USE_AUTH_MDS;
@@ -3001,7 +3001,7 @@ int ceph_getattr(struct mnt_idmap *idmap, const struct path *path,
stat->dev = ci->i_snapid_map ? ci->i_snapid_map->dev : 0;
if (S_ISDIR(inode->i_mode)) {
- if (ceph_test_mount_opt(ceph_sb_to_client(sb), RBYTES)) {
+ if (ceph_test_mount_opt(ceph_sb_to_fs_client(sb), RBYTES)) {
stat->size = ci->i_rbytes;
} else if (ceph_snap(inode) == CEPH_SNAPDIR) {
struct ceph_inode_info *pci;
diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c
index 91a84917d203c..3f617146e4ad3 100644
--- a/fs/ceph/ioctl.c
+++ b/fs/ceph/ioctl.c
@@ -65,7 +65,7 @@ static long __validate_layout(struct ceph_mds_client *mdsc,
static long ceph_ioctl_set_layout(struct file *file, void __user *arg)
{
struct inode *inode = file_inode(file);
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_mds_request *req;
struct ceph_ioctl_layout l;
struct ceph_inode_info *ci = ceph_inode(file_inode(file));
@@ -140,7 +140,7 @@ static long ceph_ioctl_set_layout_policy (struct file *file, void __user *arg)
struct ceph_mds_request *req;
struct ceph_ioctl_layout l;
int err;
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
/* copy and validate */
if (copy_from_user(&l, arg, sizeof(l)))
@@ -183,7 +183,7 @@ static long ceph_ioctl_get_dataloc(struct file *file, void __user *arg)
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_osd_client *osdc =
- &ceph_sb_to_client(inode->i_sb)->client->osdc;
+ &ceph_sb_to_fs_client(inode->i_sb)->client->osdc;
struct ceph_object_locator oloc;
CEPH_DEFINE_OID_ONSTACK(oid);
u32 xlen;
@@ -244,7 +244,7 @@ static long ceph_ioctl_lazyio(struct file *file)
struct ceph_file_info *fi = file->private_data;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
if ((fi->fmode & CEPH_FILE_MODE_LAZY) == 0) {
spin_lock(&ci->i_ceph_lock);
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 750dfe512aca0..11289ce8a8cc8 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -830,7 +830,7 @@ static void destroy_reply_info(struct ceph_mds_reply_info_parsed *info)
*/
int ceph_wait_on_conflict_unlink(struct dentry *dentry)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(dentry->d_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(dentry->d_sb);
struct dentry *pdentry = dentry->d_parent;
struct dentry *udentry, *found = NULL;
struct ceph_dentry_info *di;
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 55090e6c99672..d0d3612f28f0e 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -964,7 +964,7 @@ static void flush_snaps(struct ceph_mds_client *mdsc)
void ceph_change_snap_realm(struct inode *inode, struct ceph_snap_realm *realm)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_inode_to_fs_client(inode)->mdsc;
struct ceph_snap_realm *oldrealm = ci->i_snap_realm;
lockdep_assert_held(&ci->i_ceph_lock);
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 2d7f5a8d4a926..52af90beab000 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -44,7 +44,7 @@ static LIST_HEAD(ceph_fsc_list);
*/
static void ceph_put_super(struct super_block *s)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(s);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(s);
dout("put_super\n");
ceph_fscrypt_free_dummy_policy(fsc);
@@ -53,7 +53,7 @@ static void ceph_put_super(struct super_block *s)
static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
{
- struct ceph_fs_client *fsc = ceph_inode_to_client(d_inode(dentry));
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(d_inode(dentry));
struct ceph_mon_client *monc = &fsc->client->monc;
struct ceph_statfs st;
int i, err;
@@ -118,7 +118,7 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
static int ceph_sync_fs(struct super_block *sb, int wait)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
if (!wait) {
dout("sync_fs (non-blocking)\n");
@@ -684,7 +684,7 @@ static int compare_mount_options(struct ceph_mount_options *new_fsopt,
*/
static int ceph_show_options(struct seq_file *m, struct dentry *root)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(root->d_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(root->d_sb);
struct ceph_mount_options *fsopt = fsc->mount_options;
size_t pos;
int ret;
@@ -1015,7 +1015,7 @@ static void __ceph_umount_begin(struct ceph_fs_client *fsc)
*/
void ceph_umount_begin(struct super_block *sb)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
dout("ceph_umount_begin - starting forced umount\n");
if (!fsc)
@@ -1226,7 +1226,7 @@ static int ceph_compare_super(struct super_block *sb, struct fs_context *fc)
struct ceph_fs_client *new = fc->s_fs_info;
struct ceph_mount_options *fsopt = new->mount_options;
struct ceph_options *opt = new->client->options;
- struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
dout("ceph_compare_super %p\n", sb);
@@ -1322,9 +1322,9 @@ static int ceph_get_tree(struct fs_context *fc)
goto out;
}
- if (ceph_sb_to_client(sb) != fsc) {
+ if (ceph_sb_to_fs_client(sb) != fsc) {
destroy_fs_client(fsc);
- fsc = ceph_sb_to_client(sb);
+ fsc = ceph_sb_to_fs_client(sb);
dout("get_sb got existing client %p\n", fsc);
} else {
dout("get_sb using new client %p\n", fsc);
@@ -1377,7 +1377,7 @@ static int ceph_reconfigure_fc(struct fs_context *fc)
struct ceph_parse_opts_ctx *pctx = fc->fs_private;
struct ceph_mount_options *fsopt = pctx->opts;
struct super_block *sb = fc->root->d_sb;
- struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
err = ceph_apply_test_dummy_encryption(sb, fc, fsopt);
if (err)
@@ -1516,7 +1516,7 @@ void ceph_dec_osd_stopping_blocker(struct ceph_mds_client *mdsc)
static void ceph_kill_sb(struct super_block *s)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(s);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(s);
struct ceph_mds_client *mdsc = fsc->mdsc;
bool wait;
@@ -1578,7 +1578,7 @@ MODULE_ALIAS_FS("ceph");
int ceph_force_reconnect(struct super_block *sb)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(sb);
int err = 0;
fsc->mount_state = CEPH_MOUNT_RECOVER;
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 09c262dd5bd36..8efd4ba607744 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -488,13 +488,13 @@ ceph_inode(const struct inode *inode)
}
static inline struct ceph_fs_client *
-ceph_inode_to_client(const struct inode *inode)
+ceph_inode_to_fs_client(const struct inode *inode)
{
return (struct ceph_fs_client *)inode->i_sb->s_fs_info;
}
static inline struct ceph_fs_client *
-ceph_sb_to_client(const struct super_block *sb)
+ceph_sb_to_fs_client(const struct super_block *sb)
{
return (struct ceph_fs_client *)sb->s_fs_info;
}
@@ -502,7 +502,7 @@ ceph_sb_to_client(const struct super_block *sb)
static inline struct ceph_mds_client *
ceph_sb_to_mdsc(const struct super_block *sb)
{
- return (struct ceph_mds_client *)ceph_sb_to_client(sb)->mdsc;
+ return (struct ceph_mds_client *)ceph_sb_to_fs_client(sb)->mdsc;
}
static inline struct ceph_vino
@@ -558,7 +558,7 @@ static inline u64 ceph_snap(struct inode *inode)
*/
static inline u64 ceph_present_ino(struct super_block *sb, u64 ino)
{
- if (unlikely(ceph_test_mount_opt(ceph_sb_to_client(sb), INO32)))
+ if (unlikely(ceph_test_mount_opt(ceph_sb_to_fs_client(sb), INO32)))
return ceph_ino_to_ino32(ino);
return ino;
}
@@ -1106,7 +1106,7 @@ void ceph_inode_shutdown(struct inode *inode);
static inline bool ceph_inode_is_shutdown(struct inode *inode)
{
unsigned long flags = READ_ONCE(ceph_inode(inode)->i_ceph_flags);
- struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_fs_client(inode);
int state = READ_ONCE(fsc->mount_state);
return (flags & CEPH_I_SHUTDOWN) || state >= CEPH_MOUNT_SHUTDOWN;
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 0deae4a0f5f16..558f64554b591 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -57,7 +57,7 @@ static bool ceph_vxattrcb_layout_exists(struct ceph_inode_info *ci)
static ssize_t ceph_vxattrcb_layout(struct ceph_inode_info *ci, char *val,
size_t size)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(ci->netfs.inode.i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(ci->netfs.inode.i_sb);
struct ceph_osd_client *osdc = &fsc->client->osdc;
struct ceph_string *pool_ns;
s64 pool = ci->i_layout.pool_id;
@@ -161,7 +161,7 @@ static ssize_t ceph_vxattrcb_layout_pool(struct ceph_inode_info *ci,
char *val, size_t size)
{
ssize_t ret;
- struct ceph_fs_client *fsc = ceph_sb_to_client(ci->netfs.inode.i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(ci->netfs.inode.i_sb);
struct ceph_osd_client *osdc = &fsc->client->osdc;
s64 pool = ci->i_layout.pool_id;
const char *pool_name;
@@ -313,7 +313,7 @@ static ssize_t ceph_vxattrcb_snap_btime(struct ceph_inode_info *ci, char *val,
static ssize_t ceph_vxattrcb_cluster_fsid(struct ceph_inode_info *ci,
char *val, size_t size)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(ci->netfs.inode.i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(ci->netfs.inode.i_sb);
return ceph_fmt_xattr(val, size, "%pU", &fsc->client->fsid);
}
@@ -321,7 +321,7 @@ static ssize_t ceph_vxattrcb_cluster_fsid(struct ceph_inode_info *ci,
static ssize_t ceph_vxattrcb_client_id(struct ceph_inode_info *ci,
char *val, size_t size)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(ci->netfs.inode.i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(ci->netfs.inode.i_sb);
return ceph_fmt_xattr(val, size, "client%lld",
ceph_client_gid(fsc->client));
@@ -1094,7 +1094,7 @@ ssize_t ceph_listxattr(struct dentry *dentry, char *names, size_t size)
static int ceph_sync_setxattr(struct inode *inode, const char *name,
const char *value, size_t size, int flags)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
+ struct ceph_fs_client *fsc = ceph_sb_to_fs_client(inode->i_sb);
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_mds_request *req;
struct ceph_mds_client *mdsc = fsc->mdsc;
@@ -1164,7 +1164,7 @@ int __ceph_setxattr(struct inode *inode, const char *name,
{
struct ceph_vxattr *vxattr;
struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+ struct ceph_mds_client *mdsc = ceph_sb_to_fs_client(inode->i_sb)->mdsc;
struct ceph_cap_flush *prealloc_cf = NULL;
struct ceph_buffer *old_blob = NULL;
int issued;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 019/158] ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 018/158] ceph: rename _to_client() to _to_fs_client() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 020/158] selftests: timers: Fix posix_timers ksft_print_msg() warning Greg Kroah-Hartman
` (147 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, NeilBrown, Jeff Layton, Xiubo Li,
Ilya Dryomov, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
[ Upstream commit b372e96bd0a32729d55d27f613c8bc80708a82e1 ]
The page has been marked clean before writepage is called. If we don't
redirty it before postponing the write, it might never get written.
Cc: stable@vger.kernel.org
Fixes: 503d4fa6ee28 ("ceph: remove reliance on bdi congestion")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ceph/addr.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 28fa05a9d4d2f..da64bb7325dbc 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -803,8 +803,10 @@ static int ceph_writepage(struct page *page, struct writeback_control *wbc)
ihold(inode);
if (wbc->sync_mode == WB_SYNC_NONE &&
- ceph_inode_to_fs_client(inode)->write_congested)
+ ceph_inode_to_fs_client(inode)->write_congested) {
+ redirty_page_for_writepage(wbc, page);
return AOP_WRITEPAGE_ACTIVATE;
+ }
wait_on_page_fscache(page);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 020/158] selftests: timers: Fix posix_timers ksft_print_msg() warning
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 019/158] ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 021/158] drm/msm/dpu: populate SSPP scaler block version Greg Kroah-Hartman
` (146 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, John Stultz, Thomas Gleixner,
Justin Stitt, Shuah Khan, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <jstultz@google.com>
[ Upstream commit e4a6bceac98eba3c00e874892736b34ea5fdaca3 ]
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()") the following warning occurs when building
with an older gcc:
posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security]
250 | ksft_print_msg(errmsg);
| ^~~~~~~~~~~~~~
Fix this up by changing it to ksft_print_msg("%s", errmsg)
Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Justin Stitt <justinstitt@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/timers/posix_timers.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c
index 14355d8472110..c001dd79179d5 100644
--- a/tools/testing/selftests/timers/posix_timers.c
+++ b/tools/testing/selftests/timers/posix_timers.c
@@ -247,7 +247,7 @@ static int check_timer_distribution(void)
ksft_test_result_skip("check signal distribution (old kernel)\n");
return 0;
err:
- ksft_print_msg(errmsg);
+ ksft_print_msg("%s", errmsg);
return -1;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 021/158] drm/msm/dpu: populate SSPP scaler block version
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 020/158] selftests: timers: Fix posix_timers ksft_print_msg() warning Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 022/158] media: videobuf2: request more buffers for vb2_read Greg Kroah-Hartman
` (145 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marijn Suijten, Dmitry Baryshkov,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 46b1f1b839cad600de3ad7ed999bd0155c528746 ]
The function _dpu_hw_sspp_setup_scaler3() passes and
dpu_hw_setup_scaler3() uses scaler_blk.version to determine in which way
the scaler (QSEED3) block should be programmed. However up to now we
were not setting this field. Set it now, splitting the vig_sblk data
which has different version fields.
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: 9b6f4fedaac2 ("drm/msm/dpu: Add SM6125 support")
Fixes: 27f0df03f3ff ("drm/msm/dpu: Add SM6375 support")
Fixes: 3186acba5cdc ("drm/msm/dpu: Add SM6350 support")
Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450")
Fixes: 3581b7062cec ("drm/msm/disp/dpu1: add support for display on SM6115")
Fixes: dabfdd89eaa9 ("drm/msm/disp/dpu1: add inline rotation support for sc7280")
Fixes: f3af2d6ee9ab ("drm/msm/dpu: Add SC8180x to hw catalog")
Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Fixes: af776a3e1c30 ("drm/msm/dpu: add SM8250 to hw catalog")
Fixes: 386fced3f76f ("drm/msm/dpu: add SM8150 to hw catalog")
Fixes: b75ab05a3479 ("msm:disp:dpu1: add scaler support on SC7180 display")
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570098/
Link: https://lore.kernel.org/r/20231201234234.2065610-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../msm/disp/dpu1/catalog/dpu_5_0_sm8150.h | 8 +-
.../msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h | 8 +-
.../msm/disp/dpu1/catalog/dpu_8_1_sm8450.h | 8 +-
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 95 ++++++++++++++-----
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +-
5 files changed, 87 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h
index 99acaf917e430..f0c3804f42587 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h
@@ -77,7 +77,7 @@ static const struct dpu_sspp_cfg sm8150_sspp[] = {
.name = "sspp_0", .id = SSPP_VIG0,
.base = 0x4000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_0,
+ .sblk = &sm8150_vig_sblk_0,
.xin_id = 0,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG0,
@@ -85,7 +85,7 @@ static const struct dpu_sspp_cfg sm8150_sspp[] = {
.name = "sspp_1", .id = SSPP_VIG1,
.base = 0x6000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_1,
+ .sblk = &sm8150_vig_sblk_1,
.xin_id = 4,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG1,
@@ -93,7 +93,7 @@ static const struct dpu_sspp_cfg sm8150_sspp[] = {
.name = "sspp_2", .id = SSPP_VIG2,
.base = 0x8000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_2,
+ .sblk = &sm8150_vig_sblk_2,
.xin_id = 8,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG2,
@@ -101,7 +101,7 @@ static const struct dpu_sspp_cfg sm8150_sspp[] = {
.name = "sspp_3", .id = SSPP_VIG3,
.base = 0xa000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_3,
+ .sblk = &sm8150_vig_sblk_3,
.xin_id = 12,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG3,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
index c92fbf24fbac1..47de71e71e310 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h
@@ -76,7 +76,7 @@ static const struct dpu_sspp_cfg sc8180x_sspp[] = {
.name = "sspp_0", .id = SSPP_VIG0,
.base = 0x4000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_0,
+ .sblk = &sm8150_vig_sblk_0,
.xin_id = 0,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG0,
@@ -84,7 +84,7 @@ static const struct dpu_sspp_cfg sc8180x_sspp[] = {
.name = "sspp_1", .id = SSPP_VIG1,
.base = 0x6000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_1,
+ .sblk = &sm8150_vig_sblk_1,
.xin_id = 4,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG1,
@@ -92,7 +92,7 @@ static const struct dpu_sspp_cfg sc8180x_sspp[] = {
.name = "sspp_2", .id = SSPP_VIG2,
.base = 0x8000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_2,
+ .sblk = &sm8150_vig_sblk_2,
.xin_id = 8,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG2,
@@ -100,7 +100,7 @@ static const struct dpu_sspp_cfg sc8180x_sspp[] = {
.name = "sspp_3", .id = SSPP_VIG3,
.base = 0xa000, .len = 0x1f0,
.features = VIG_SDM845_MASK,
- .sblk = &sdm845_vig_sblk_3,
+ .sblk = &sm8150_vig_sblk_3,
.xin_id = 12,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG3,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
index 8a19cfa274dea..72a1726371cae 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h
@@ -77,7 +77,7 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = {
.name = "sspp_0", .id = SSPP_VIG0,
.base = 0x4000, .len = 0x32c,
.features = VIG_SC7180_MASK,
- .sblk = &sm8250_vig_sblk_0,
+ .sblk = &sm8450_vig_sblk_0,
.xin_id = 0,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG0,
@@ -85,7 +85,7 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = {
.name = "sspp_1", .id = SSPP_VIG1,
.base = 0x6000, .len = 0x32c,
.features = VIG_SC7180_MASK,
- .sblk = &sm8250_vig_sblk_1,
+ .sblk = &sm8450_vig_sblk_1,
.xin_id = 4,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG1,
@@ -93,7 +93,7 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = {
.name = "sspp_2", .id = SSPP_VIG2,
.base = 0x8000, .len = 0x32c,
.features = VIG_SC7180_MASK,
- .sblk = &sm8250_vig_sblk_2,
+ .sblk = &sm8450_vig_sblk_2,
.xin_id = 8,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG2,
@@ -101,7 +101,7 @@ static const struct dpu_sspp_cfg sm8450_sspp[] = {
.name = "sspp_3", .id = SSPP_VIG3,
.base = 0xa000, .len = 0x32c,
.features = VIG_SC7180_MASK,
- .sblk = &sm8250_vig_sblk_3,
+ .sblk = &sm8450_vig_sblk_3,
.xin_id = 12,
.type = SSPP_TYPE_VIG,
.clk_ctrl = DPU_CLK_CTRL_VIG3,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 713dfc0797181..77d09f961d866 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -250,14 +250,17 @@ static const uint32_t wb2_formats[] = {
* SSPP sub blocks config
*************************************************************/
+#define SSPP_SCALER_VER(maj, min) (((maj) << 16) | (min))
+
/* SSPP common configuration */
-#define _VIG_SBLK(sdma_pri, qseed_ver) \
+#define _VIG_SBLK(sdma_pri, qseed_ver, scaler_ver) \
{ \
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
.maxupscale = MAX_UPSCALE_RATIO, \
.smart_dma_priority = sdma_pri, \
.scaler_blk = {.name = "scaler", \
.id = qseed_ver, \
+ .version = scaler_ver, \
.base = 0xa00, .len = 0xa0,}, \
.csc_blk = {.name = "csc", \
.id = DPU_SSPP_CSC_10BIT, \
@@ -269,13 +272,14 @@ static const uint32_t wb2_formats[] = {
.rotation_cfg = NULL, \
}
-#define _VIG_SBLK_ROT(sdma_pri, qseed_ver, rot_cfg) \
+#define _VIG_SBLK_ROT(sdma_pri, qseed_ver, scaler_ver, rot_cfg) \
{ \
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
.maxupscale = MAX_UPSCALE_RATIO, \
.smart_dma_priority = sdma_pri, \
.scaler_blk = {.name = "scaler", \
.id = qseed_ver, \
+ .version = scaler_ver, \
.base = 0xa00, .len = 0xa0,}, \
.csc_blk = {.name = "csc", \
.id = DPU_SSPP_CSC_10BIT, \
@@ -299,13 +303,17 @@ static const uint32_t wb2_formats[] = {
}
static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
- _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 2));
static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
- _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 2));
static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
- _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 2));
static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
- _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(0, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 2));
static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
.rot_maxheight = 1088,
@@ -314,13 +322,30 @@ static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
};
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
- _VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 3));
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
- _VIG_SBLK(6, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(6, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 3));
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_2 =
- _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 3));
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_3 =
- _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED3);
+ _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 3));
+
+static const struct dpu_sspp_sub_blks sm8150_vig_sblk_0 =
+ _VIG_SBLK(5, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 4));
+static const struct dpu_sspp_sub_blks sm8150_vig_sblk_1 =
+ _VIG_SBLK(6, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 4));
+static const struct dpu_sspp_sub_blks sm8150_vig_sblk_2 =
+ _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 4));
+static const struct dpu_sspp_sub_blks sm8150_vig_sblk_3 =
+ _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED3,
+ SSPP_SCALER_VER(1, 4));
static const struct dpu_sspp_sub_blks sdm845_dma_sblk_0 = _DMA_SBLK(1);
static const struct dpu_sspp_sub_blks sdm845_dma_sblk_1 = _DMA_SBLK(2);
@@ -328,34 +353,60 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_2 = _DMA_SBLK(3);
static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK(4);
static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 =
- _VIG_SBLK(4, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(4, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0));
static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 =
- _VIG_SBLK_ROT(4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2);
+ _VIG_SBLK_ROT(4, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0),
+ &dpu_rot_sc7280_cfg_v2);
static const struct dpu_sspp_sub_blks sm6115_vig_sblk_0 =
- _VIG_SBLK(2, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(2, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0));
static const struct dpu_sspp_sub_blks sm6125_vig_sblk_0 =
- _VIG_SBLK(3, DPU_SSPP_SCALER_QSEED3LITE);
+ _VIG_SBLK(3, DPU_SSPP_SCALER_QSEED3LITE,
+ SSPP_SCALER_VER(2, 4));
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
- _VIG_SBLK(5, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(5, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0));
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
- _VIG_SBLK(6, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(6, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0));
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_2 =
- _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0));
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_3 =
- _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 0));
+
+static const struct dpu_sspp_sub_blks sm8450_vig_sblk_0 =
+ _VIG_SBLK(5, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 1));
+static const struct dpu_sspp_sub_blks sm8450_vig_sblk_1 =
+ _VIG_SBLK(6, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 1));
+static const struct dpu_sspp_sub_blks sm8450_vig_sblk_2 =
+ _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 1));
+static const struct dpu_sspp_sub_blks sm8450_vig_sblk_3 =
+ _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 1));
static const struct dpu_sspp_sub_blks sm8550_vig_sblk_0 =
- _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(7, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 2));
static const struct dpu_sspp_sub_blks sm8550_vig_sblk_1 =
- _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(8, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 2));
static const struct dpu_sspp_sub_blks sm8550_vig_sblk_2 =
- _VIG_SBLK(9, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(9, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 2));
static const struct dpu_sspp_sub_blks sm8550_vig_sblk_3 =
- _VIG_SBLK(10, DPU_SSPP_SCALER_QSEED4);
+ _VIG_SBLK(10, DPU_SSPP_SCALER_QSEED4,
+ SSPP_SCALER_VER(3, 2));
static const struct dpu_sspp_sub_blks sm8550_dma_sblk_4 = _DMA_SBLK(5);
static const struct dpu_sspp_sub_blks sm8550_dma_sblk_5 = _DMA_SBLK(6);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 6c9634209e9fc..3f82d84bd1c90 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -269,7 +269,8 @@ enum {
/**
* struct dpu_scaler_blk: Scaler information
* @info: HW register and features supported by this sub-blk
- * @version: qseed block revision
+ * @version: qseed block revision, on QSEED3+ platforms this is the value of
+ * scaler_blk.base + QSEED3_HW_VERSION registers.
*/
struct dpu_scaler_blk {
DPU_HW_SUBBLK_INFO;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 022/158] media: videobuf2: request more buffers for vb2_read
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 021/158] drm/msm/dpu: populate SSPP scaler block version Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 023/158] io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure Greg Kroah-Hartman
` (144 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hans Verkuil,
Dr. David Alan Gilbert, Mauro Carvalho Chehab, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[ Upstream commit 350ab13e1382f2afcc2285041a1e75b80d771c2c ]
The vb2 read support requests 1 buffer, leaving it to the driver
to increase this number to something that works.
Unfortunately, drivers do not deal with this reliably, and in fact
this caused problems for the bttv driver and reading from /dev/vbiX,
causing every other VBI frame to be all 0.
Instead, request as the number of buffers whatever is the maximum of
2 and q->min_buffers_needed+1.
In order to start streaming you need at least q->min_buffers_needed
queued buffers, so add 1 buffer for processing. And if that field
is 0, then choose 2 (again, one buffer is being filled while the
other one is being processed).
This certainly makes more sense than requesting just 1 buffer, and
the VBI bttv support is now working again.
It turns out that the old videobuf1 behavior of bttv was to allocate
8 (video) and 4 (vbi) buffers when used with read(). After the vb2
conversion that changed to 2 for both. With this patch it is 3, which
is really all you need.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/common/videobuf2/videobuf2-core.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index cf6727d9c81f3..468191438849e 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -2648,9 +2648,14 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
return -EBUSY;
/*
- * Start with count 1, driver can increase it in queue_setup()
+ * Start with q->min_buffers_needed + 1, driver can increase it in
+ * queue_setup()
+ *
+ * 'min_buffers_needed' buffers need to be queued up before you
+ * can start streaming, plus 1 for userspace (or in this case,
+ * kernelspace) processing.
*/
- count = 1;
+ count = max(2, q->min_buffers_needed + 1);
dprintk(q, 3, "setting up file io: mode %s, count %d, read_once %d, write_immediately %d\n",
(read) ? "read" : "write", count, q->fileio_read_once,
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 023/158] io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 022/158] media: videobuf2: request more buffers for vb2_read Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 024/158] drm/i915/vma: Fix UAF on destroy against retire race Greg Kroah-Hartman
` (143 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexey Izbyshev, Jens Axboe
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Izbyshev <izbyshev@ispras.ru>
Commit 978e5c19dfefc271e5550efba92fcef0d3f62864 upstream.
This bug was introduced in commit 950e79dd7313 ("io_uring: minor
io_cqring_wait() optimization"), which was made in preparation for
adc8682ec690 ("io_uring: Add support for napi_busy_poll"). The latter
got reverted in cb3182167325 ("Revert "io_uring: Add support for
napi_busy_poll""), so simply undo the former as well.
Cc: stable@vger.kernel.org
Fixes: 950e79dd7313 ("io_uring: minor io_cqring_wait() optimization")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Link: https://lore.kernel.org/r/20240405125551.237142-1-izbyshev@ispras.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
io_uring/io_uring.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2559,19 +2559,6 @@ static int io_cqring_wait(struct io_ring
if (__io_cqring_events_user(ctx) >= min_events)
return 0;
- if (sig) {
-#ifdef CONFIG_COMPAT
- if (in_compat_syscall())
- ret = set_compat_user_sigmask((const compat_sigset_t __user *)sig,
- sigsz);
- else
-#endif
- ret = set_user_sigmask(sig, sigsz);
-
- if (ret)
- return ret;
- }
-
init_waitqueue_func_entry(&iowq.wq, io_wake_function);
iowq.wq.private = current;
INIT_LIST_HEAD(&iowq.wq.entry);
@@ -2588,6 +2575,19 @@ static int io_cqring_wait(struct io_ring
iowq.timeout = ktime_add_ns(timespec64_to_ktime(ts), ktime_get_ns());
}
+ if (sig) {
+#ifdef CONFIG_COMPAT
+ if (in_compat_syscall())
+ ret = set_compat_user_sigmask((const compat_sigset_t __user *)sig,
+ sigsz);
+ else
+#endif
+ ret = set_user_sigmask(sig, sigsz);
+
+ if (ret)
+ return ret;
+ }
+
trace_io_uring_cqring_wait(ctx, min_events);
do {
int nr_wait = (int) iowq.cq_tail - READ_ONCE(ctx->rings->cq.tail);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 024/158] drm/i915/vma: Fix UAF on destroy against retire race
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 023/158] io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 025/158] SUNRPC: Fix rpcgss_context trace event acceptor field Greg Kroah-Hartman
` (142 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Janusz Krzysztofik,
Thomas Hellström, Nirmoy Das, Andi Shyti, Rodrigo Vivi
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
commit 0e45882ca829b26b915162e8e86dbb1095768e9e upstream.
Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.
[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]
That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.
We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini(). Then, we should
rather fix the issue at the VMA level, not in i915_active.
Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.
I believe the issue was introduced by commit d93939730347 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246feb9
("drm/i915/active: Fix missing debug object activation").
A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM. Those wakerefs are released asynchronously to VMA deactivation.
Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated. However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle. Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put. Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.
v7: Add inline comments with justifications for:
- using untracked variants of intel_gt_pm_get/put() (Nirmoy),
- using async variant of _put(),
- not getting the wakeref in case of a global GTT,
- always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
a wakeref tracking handle inside struct i915_vma is not safe, and
there is no other good place for that. Use untracked variants of
intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
- avoid mentioning multi-GT case in commit description (Rodrigo),
- explain why we need to take a temporary wakeref unconditionally inside
i915_vma_pin_ww() (Rodrigo).
v4: Refresh on top of commit 5e4e06e4087e ("drm/i915: Track gt pm
wakerefs") (Andi),
- for more easy backporting, split out removal of former insufficient
workarounds and move them to separate patches (Nirmoy).
- clean up commit message and description a bit.
v3: Identify root cause more precisely, and a commit to blame,
- identify and drop former workarounds,
- update commit message and description.
v2: Get the wakeref before VM mutex to avoid circular locking dependency,
- drop questionable Fixes: tag.
Fixes: d93939730347 ("drm/i915: Remove the vma refcount")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f3c71b2ded5c4367144a810ef25f998fd1d6c381)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/i915_vma.c | 42 +++++++++++++++++++++++++++++++++-------
1 file changed, 35 insertions(+), 7 deletions(-)
--- a/drivers/gpu/drm/i915/i915_vma.c
+++ b/drivers/gpu/drm/i915/i915_vma.c
@@ -33,6 +33,7 @@
#include "gt/intel_engine.h"
#include "gt/intel_engine_heartbeat.h"
#include "gt/intel_gt.h"
+#include "gt/intel_gt_pm.h"
#include "gt/intel_gt_requests.h"
#include "gt/intel_tlb.h"
@@ -102,12 +103,34 @@ static inline struct i915_vma *active_to
static int __i915_vma_active(struct i915_active *ref)
{
- return i915_vma_tryget(active_to_vma(ref)) ? 0 : -ENOENT;
+ struct i915_vma *vma = active_to_vma(ref);
+
+ if (!i915_vma_tryget(vma))
+ return -ENOENT;
+
+ /*
+ * Exclude global GTT VMA from holding a GT wakeref
+ * while active, otherwise GPU never goes idle.
+ */
+ if (!i915_vma_is_ggtt(vma))
+ intel_gt_pm_get(vma->vm->gt);
+
+ return 0;
}
static void __i915_vma_retire(struct i915_active *ref)
{
- i915_vma_put(active_to_vma(ref));
+ struct i915_vma *vma = active_to_vma(ref);
+
+ if (!i915_vma_is_ggtt(vma)) {
+ /*
+ * Since we can be called from atomic contexts,
+ * use an async variant of intel_gt_pm_put().
+ */
+ intel_gt_pm_put_async(vma->vm->gt);
+ }
+
+ i915_vma_put(vma);
}
static struct i915_vma *
@@ -1403,7 +1426,7 @@ int i915_vma_pin_ww(struct i915_vma *vma
struct i915_vma_work *work = NULL;
struct dma_fence *moving = NULL;
struct i915_vma_resource *vma_res = NULL;
- intel_wakeref_t wakeref = 0;
+ intel_wakeref_t wakeref;
unsigned int bound;
int err;
@@ -1423,8 +1446,14 @@ int i915_vma_pin_ww(struct i915_vma *vma
if (err)
return err;
- if (flags & PIN_GLOBAL)
- wakeref = intel_runtime_pm_get(&vma->vm->i915->runtime_pm);
+ /*
+ * In case of a global GTT, we must hold a runtime-pm wakeref
+ * while global PTEs are updated. In other cases, we hold
+ * the rpm reference while the VMA is active. Since runtime
+ * resume may require allocations, which are forbidden inside
+ * vm->mutex, get the first rpm wakeref outside of the mutex.
+ */
+ wakeref = intel_runtime_pm_get(&vma->vm->i915->runtime_pm);
if (flags & vma->vm->bind_async_flags) {
/* lock VM */
@@ -1560,8 +1589,7 @@ err_fence:
if (work)
dma_fence_work_commit_imm(&work->base);
err_rpm:
- if (wakeref)
- intel_runtime_pm_put(&vma->vm->i915->runtime_pm, wakeref);
+ intel_runtime_pm_put(&vma->vm->i915->runtime_pm, wakeref);
if (moving)
dma_fence_put(moving);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 025/158] SUNRPC: Fix rpcgss_context trace event acceptor field
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 024/158] drm/i915/vma: Fix UAF on destroy against retire race Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 026/158] selftests/ftrace: Limit length in subsystem-enable tests Greg Kroah-Hartman
` (141 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Steven Rostedt (Google), Chuck Lever
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (Google) <rostedt@goodmis.org>
commit a4833e3abae132d613ce7da0e0c9a9465d1681fa upstream.
The rpcgss_context trace event acceptor field is a dynamically sized
string that records the "data" parameter. But this parameter is also
dependent on the "len" field to determine the size of the data.
It needs to use __string_len() helper macro where the length can be passed
in. It also incorrectly uses strncpy() to save it instead of
__assign_str(). As these macros can change, it is not wise to open code
them in trace events.
As of commit c759e609030c ("tracing: Remove __assign_str_len()"),
__assign_str() can be used for both __string() and __string_len() fields.
Before that commit, __assign_str_len() is required to be used. This needs
to be noted for backporting. (In actuality, commit c1fa617caeb0 ("tracing:
Rework __assign_str() and __string() to not duplicate getting the string")
is the commit that makes __string_str_len() obsolete).
Cc: stable@vger.kernel.org
Fixes: 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/trace/events/rpcgss.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/trace/events/rpcgss.h
+++ b/include/trace/events/rpcgss.h
@@ -609,7 +609,7 @@ TRACE_EVENT(rpcgss_context,
__field(unsigned int, timeout)
__field(u32, window_size)
__field(int, len)
- __string(acceptor, data)
+ __string_len(acceptor, data, len)
),
TP_fast_assign(
@@ -618,7 +618,7 @@ TRACE_EVENT(rpcgss_context,
__entry->timeout = timeout;
__entry->window_size = window_size;
__entry->len = len;
- strncpy(__get_str(acceptor), data, len);
+ __assign_str(acceptor, data);
),
TP_printk("win_size=%u expiry=%lu now=%lu timeout=%u acceptor=%.*s",
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 026/158] selftests/ftrace: Limit length in subsystem-enable tests
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 025/158] SUNRPC: Fix rpcgss_context trace event acceptor field Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 027/158] random: handle creditable entropy from atomic process context Greg Kroah-Hartman
` (140 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuanhe Shu,
Masami Hiramatsu (Google), Steven Rostedt (Google),
Shuah Khan
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuanhe Shu <xiangzao@linux.alibaba.com>
commit 1a4ea83a6e67f1415a1f17c1af5e9c814c882bb5 upstream.
While sched* events being traced and sched* events continuously happen,
"[xx] event tracing - enable/disable with subsystem level files" would
not stop as on some slower systems it seems to take forever.
Select the first 100 lines of output would be enough to judge whether
there are more than 3 types of sched events.
Fixes: 815b18ea66d6 ("ftracetest: Add basic event tracing test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
@@ -18,7 +18,7 @@ echo 'sched:*' > set_event
yield
-count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
if [ $count -lt 3 ]; then
fail "at least fork, exec and exit events should be recorded"
fi
@@ -29,7 +29,7 @@ echo 1 > events/sched/enable
yield
-count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
if [ $count -lt 3 ]; then
fail "at least fork, exec and exit events should be recorded"
fi
@@ -40,7 +40,7 @@ echo 0 > events/sched/enable
yield
-count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
if [ $count -ne 0 ]; then
fail "any of scheduler events should not be recorded"
fi
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 027/158] random: handle creditable entropy from atomic process context
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 026/158] selftests/ftrace: Limit length in subsystem-enable tests Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 028/158] scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING Greg Kroah-Hartman
` (139 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Guoyong Wang, Jason A. Donenfeld
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit e871abcda3b67d0820b4182ebe93435624e9c6a4 upstream.
The entropy accounting changes a static key when the RNG has
initialized, since it only ever initializes once. Static key changes,
however, cannot be made from atomic context, so depending on where the
last creditable entropy comes from, the static key change might need to
be deferred to a worker.
Previously the code used the execute_in_process_context() helper
function, which accounts for whether or not the caller is
in_interrupt(). However, that doesn't account for the case where the
caller is actually in process context but is holding a spinlock.
This turned out to be the case with input_handle_event() in
drivers/input/input.c contributing entropy:
[<ffffffd613025ba0>] die+0xa8/0x2fc
[<ffffffd613027428>] bug_handler+0x44/0xec
[<ffffffd613016964>] brk_handler+0x90/0x144
[<ffffffd613041e58>] do_debug_exception+0xa0/0x148
[<ffffffd61400c208>] el1_dbg+0x60/0x7c
[<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90
[<ffffffd613011294>] el1h_64_sync+0x64/0x6c
[<ffffffd613102d88>] __might_resched+0x1fc/0x2e8
[<ffffffd613102b54>] __might_sleep+0x44/0x7c
[<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec
[<ffffffd6132c2820>] static_key_enable+0x14/0x38
[<ffffffd61400ac08>] crng_set_ready+0x14/0x28
[<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8
[<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc
[<ffffffd6138580c8>] add_timer_randomness+0x264/0x270
[<ffffffd613857e54>] add_input_randomness+0x38/0x48
[<ffffffd613a80f94>] input_handle_event+0x2b8/0x490
[<ffffffd613a81310>] input_event+0x6c/0x98
According to Guoyong, it's not really possible to refactor the various
drivers to never hold a spinlock there. And in_atomic() isn't reliable.
So, rather than trying to be too fancy, just punt the change in the
static key to a workqueue always. There's basically no drawback of doing
this, as the code already needed to account for the static key not
changing immediately, and given that it's just an optimization, there's
not exactly a hurry to change the static key right away, so deferal is
fine.
Reported-by: Guoyong Wang <guoyong.wang@mediatek.com>
Cc: stable@vger.kernel.org
Fixes: f5bda35fba61 ("random: use static branch for crng_ready()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/random.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -702,7 +702,7 @@ static void extract_entropy(void *buf, s
static void __cold _credit_init_bits(size_t bits)
{
- static struct execute_work set_ready;
+ static DECLARE_WORK(set_ready, crng_set_ready);
unsigned int new, orig, add;
unsigned long flags;
@@ -718,8 +718,8 @@ static void __cold _credit_init_bits(siz
if (orig < POOL_READY_BITS && new >= POOL_READY_BITS) {
crng_reseed(NULL); /* Sets crng_init to CRNG_READY under base_crng.lock. */
- if (static_key_initialized)
- execute_in_process_context(crng_set_ready, &set_ready);
+ if (static_key_initialized && system_unbound_wq)
+ queue_work(system_unbound_wq, &set_ready);
atomic_notifier_call_chain(&random_ready_notifier, 0, NULL);
wake_up_interruptible(&crng_init_wait);
kill_fasync(&fasync, SIGIO, POLL_IN);
@@ -890,8 +890,8 @@ void __init random_init(void)
/*
* If we were initialized by the cpu or bootloader before jump labels
- * are initialized, then we should enable the static branch here, where
- * it's guaranteed that jump labels have been initialized.
+ * or workqueues are initialized, then we should enable the static
+ * branch here, where it's guaranteed that these have been initialized.
*/
if (!static_branch_likely(&crng_is_ready) && crng_init >= CRNG_READY)
crng_set_ready(NULL);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 028/158] scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 027/158] random: handle creditable entropy from atomic process context Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 029/158] net: usb: ax88179_178a: avoid writing the mac address before first reading Greg Kroah-Hartman
` (138 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Bart Van Assche, Martin K. Petersen
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <bvanassche@acm.org>
commit ca91259b775f6fd98ae5d23bb4eec101d468ba8d upstream.
There is code in the SCSI core that sets the SCMD_FAIL_IF_RECOVERING
flag but there is no code that clears this flag. Instead of only clearing
SCMD_INITIALIZED in scsi_end_request(), clear all flags. It is never
necessary to preserve any command flags inside scsi_end_request().
Cc: stable@vger.kernel.org
Fixes: 310bcaef6d7e ("scsi: core: Support failing requests while recovering")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240325224417.1477135-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/scsi_lib.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -543,10 +543,9 @@ static bool scsi_end_request(struct requ
if (blk_queue_add_random(q))
add_disk_randomness(req->q->disk);
- if (!blk_rq_is_passthrough(req)) {
- WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED));
- cmd->flags &= ~SCMD_INITIALIZED;
- }
+ WARN_ON_ONCE(!blk_rq_is_passthrough(req) &&
+ !(cmd->flags & SCMD_INITIALIZED));
+ cmd->flags = 0;
/*
* Calling rcu_barrier() is not necessary here because the
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 029/158] net: usb: ax88179_178a: avoid writing the mac address before first reading
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 028/158] scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 030/158] arm64/mm: Modify range-based tlbi to decrement scale Greg Kroah-Hartman
` (137 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jarkko Palviainen,
Jose Ignacio Tornos Martinez, Jakub Kicinski
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
commit 56f78615bcb1c3ba58a5d9911bad3d9185cf141b upstream.
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/ax88179_178a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1317,6 +1317,8 @@ static int ax88179_bind(struct usbnet *d
netif_set_tso_max_size(dev->net, 16384);
+ ax88179_reset(dev);
+
return 0;
}
@@ -1695,7 +1697,6 @@ static const struct driver_info ax88179_
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1708,7 +1709,6 @@ static const struct driver_info ax88178a
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 030/158] arm64/mm: Modify range-based tlbi to decrement scale
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 029/158] net: usb: ax88179_178a: avoid writing the mac address before first reading Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 031/158] arm64: tlb: Fix TLBI RANGE operand Greg Kroah-Hartman
` (136 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Oliver Upton, Ryan Roberts, Marc Zyngier
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryan Roberts <ryan.roberts@arm.com>
commit e2768b798a197318736f00c506633cb78ff77012 upstream.
In preparation for adding support for LPA2 to the tlb invalidation
routines, modify the algorithm used by range-based tlbi to start at the
highest 'scale' and decrement instead of starting at the lowest 'scale'
and incrementing. This new approach makes it possible to maintain 64K
alignment as we work through the range, until the last op (at scale=0).
This is required when LPA2 is enabled. (This part will be added in a
subsequent commit).
This change is separated into its own patch because it will also impact
non-LPA2 systems, and I want to make it easy to bisect in case it leads
to performance regression (see below for benchmarks that suggest this
should not be a problem).
The original commit (d1d3aa98 "arm64: tlb: Use the TLBI RANGE feature in
arm64") stated this as the reason for _incrementing_ scale:
However, in most scenarios, the pages = 1 when flush_tlb_range() is
called. Start from scale = 3 or other proper value (such as scale
=ilog2(pages)), will incur extra overhead. So increase 'scale' from 0
to maximum.
But pages=1 is already special cased by the non-range invalidation path,
which will take care of it the first time through the loop (both in the
original commit and in my change), so I don't think switching to
decrement scale should have any extra performance impact after all.
Indeed benchmarking kernel compilation, a TLBI-heavy workload, suggests
that this new approach actually _improves_ performance slightly (using a
virtual machine on Apple M2):
Table shows time to execute kernel compilation workload with 8 jobs,
relative to baseline without this patch (more negative number is
bigger speedup). Repeated 9 times across 3 system reboots:
| counter | mean | stdev |
|:----------|-----------:|----------:|
| real-time | -0.6% | 0.0% |
| kern-time | -1.6% | 0.5% |
| user-time | -0.4% | 0.1% |
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-2-ryan.roberts@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/tlbflush.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -351,14 +351,14 @@ static inline void arch_tlbbatch_flush(s
* entries one by one at the granularity of 'stride'. If the TLB
* range ops are supported, then:
*
- * 1. If 'pages' is odd, flush the first page through non-range
- * operations;
+ * 1. The minimum range granularity is decided by 'scale', so multiple range
+ * TLBI operations may be required. Start from scale = 3, flush the largest
+ * possible number of pages ((num+1)*2^(5*scale+1)) that fit into the
+ * requested range, then decrement scale and continue until one or zero pages
+ * are left.
*
- * 2. For remaining pages: the minimum range granularity is decided
- * by 'scale', so multiple range TLBI operations may be required.
- * Start from scale = 0, flush the corresponding number of pages
- * ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
- * until no pages left.
+ * 2. If there is 1 page remaining, flush it through non-range operations. Range
+ * operations can only span an even number of pages.
*
* Note that certain ranges can be represented by either num = 31 and
* scale or num = 0 and scale + 1. The loop below favours the latter
@@ -368,12 +368,12 @@ static inline void arch_tlbbatch_flush(s
asid, tlb_level, tlbi_user) \
do { \
int num = 0; \
- int scale = 0; \
+ int scale = 3; \
unsigned long addr; \
\
while (pages > 0) { \
if (!system_supports_tlb_range() || \
- pages % 2 == 1) { \
+ pages == 1) { \
addr = __TLBI_VADDR(start, asid); \
__tlbi_level(op, addr, tlb_level); \
if (tlbi_user) \
@@ -393,7 +393,7 @@ do { \
start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
pages -= __TLBI_RANGE_PAGES(num, scale); \
} \
- scale++; \
+ scale--; \
} \
} while (0)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 031/158] arm64: tlb: Fix TLBI RANGE operand
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 030/158] arm64/mm: Modify range-based tlbi to decrement scale Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 032/158] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 Greg Kroah-Hartman
` (135 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yihuang Yu, Marc Zyngier,
Gavin Shan, Catalin Marinas, Ryan Roberts, Anshuman Khandual,
Shaoqin Huang, stable
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gavin Shan <gshan@redhat.com>
commit e3ba51ab24fddef79fc212f9840de54db8fd1685 upstream.
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/include/asm/tlbflush.h | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -152,12 +152,18 @@ static inline unsigned long get_trans_gr
#define MAX_TLBI_RANGE_PAGES __TLBI_RANGE_PAGES(31, 3)
/*
- * Generate 'num' values from -1 to 30 with -1 rejected by the
- * __flush_tlb_range() loop below.
- */
-#define TLBI_RANGE_MASK GENMASK_ULL(4, 0)
-#define __TLBI_RANGE_NUM(pages, scale) \
- ((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1)
+ * Generate 'num' values from -1 to 31 with -1 rejected by the
+ * __flush_tlb_range() loop below. Its return value is only
+ * significant for a maximum of MAX_TLBI_RANGE_PAGES pages. If
+ * 'pages' is more than that, you must iterate over the overall
+ * range.
+ */
+#define __TLBI_RANGE_NUM(pages, scale) \
+ ({ \
+ int __pages = min((pages), \
+ __TLBI_RANGE_PAGES(31, (scale))); \
+ (__pages >> (5 * (scale) + 1)) - 1; \
+ })
/*
* TLB Invalidation
@@ -359,10 +365,6 @@ static inline void arch_tlbbatch_flush(s
*
* 2. If there is 1 page remaining, flush it through non-range operations. Range
* operations can only span an even number of pages.
- *
- * Note that certain ranges can be represented by either num = 31 and
- * scale or num = 0 and scale + 1. The loop below favours the latter
- * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
*/
#define __flush_tlb_range_op(op, start, pages, stride, \
asid, tlb_level, tlbi_user) \
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 032/158] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 031/158] arm64: tlb: Fix TLBI RANGE operand Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 033/158] netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get() Greg Kroah-Hartman
` (134 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Amit Pundir, Manivannan Sadhasivam,
Martin K. Petersen, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Upstream commit 8db8f6ce556af60ca9a9fd5e826d369ded70fcc7 ]
These entries are necessary to scale the interconnect bandwidth while
operating in Gear 5.
Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ufs/host/ufs-qcom.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 0cbe14aca8774..797219db026bc 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -47,7 +47,7 @@ enum {
TSTBUS_MAX,
};
-#define QCOM_UFS_MAX_GEAR 4
+#define QCOM_UFS_MAX_GEAR 5
#define QCOM_UFS_MAX_LANE 2
enum {
@@ -67,26 +67,32 @@ static const struct __ufs_qcom_bw_table {
[MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844, 1000 },
[MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688, 1000 },
[MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376, 1000 },
+ [MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752, 1000 },
[MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844, 1000 },
[MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688, 1000 },
[MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376, 1000 },
[MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752, 1000 },
+ [MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504, 1000 },
[MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796, 1000 },
[MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591, 1000 },
[MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 },
[MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 },
+ [MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 },
[MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591, 1000 },
[MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181, 1000 },
[MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 },
[MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 },
+ [MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 },
[MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422, 1000 },
[MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189, 1000 },
[MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 },
[MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 },
+ [MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 },
[MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189, 1000 },
[MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378, 1000 },
[MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 },
[MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 },
+ [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 },
[MODE_MAX][0][0] = { 7643136, 307200 },
};
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 033/158] netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 032/158] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 034/158] netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() Greg Kroah-Hartman
` (133 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ziyang Xuan, Pablo Neira Ayuso, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyang Xuan <william.xuanziyang@huawei.com>
[ Upstream commit f969eb84ce482331a991079ab7a5c4dc3b7f89bf ]
nft_unregister_expr() can concurrent with __nft_expr_type_get(),
and there is not any protection when iterate over nf_tables_expressions
list in __nft_expr_type_get(). Therefore, there is potential data-race
of nf_tables_expressions list entry.
Use list_for_each_entry_rcu() to iterate over nf_tables_expressions
list in __nft_expr_type_get(), and use rcu_read_lock() in the caller
nft_expr_type_get() to protect the entire type query process.
Fixes: ef1f7df9170d ("netfilter: nf_tables: expression ops overloading")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_tables_api.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 2a4649df8f086..fe6ee16e2dbf4 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3047,7 +3047,7 @@ static const struct nft_expr_type *__nft_expr_type_get(u8 family,
{
const struct nft_expr_type *type, *candidate = NULL;
- list_for_each_entry(type, &nf_tables_expressions, list) {
+ list_for_each_entry_rcu(type, &nf_tables_expressions, list) {
if (!nla_strcmp(nla, type->name)) {
if (!type->family && !candidate)
candidate = type;
@@ -3079,9 +3079,13 @@ static const struct nft_expr_type *nft_expr_type_get(struct net *net,
if (nla == NULL)
return ERR_PTR(-EINVAL);
+ rcu_read_lock();
type = __nft_expr_type_get(family, nla);
- if (type != NULL && try_module_get(type->owner))
+ if (type != NULL && try_module_get(type->owner)) {
+ rcu_read_unlock();
return type;
+ }
+ rcu_read_unlock();
lockdep_nfnl_nft_mutex_not_held();
#ifdef CONFIG_MODULES
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 034/158] netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 033/158] netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 035/158] netfilter: br_netfilter: skip conntrack input hook for promisc packets Greg Kroah-Hartman
` (132 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ziyang Xuan, Pablo Neira Ayuso, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ziyang Xuan <william.xuanziyang@huawei.com>
[ Upstream commit d78d867dcea69c328db30df665be5be7d0148484 ]
nft_unregister_obj() can concurrent with __nft_obj_type_get(),
and there is not any protection when iterate over nf_tables_objects
list in __nft_obj_type_get(). Therefore, there is potential data-race
of nf_tables_objects list entry.
Use list_for_each_entry_rcu() to iterate over nf_tables_objects
list in __nft_obj_type_get(), and use rcu_read_lock() in the caller
nft_obj_type_get() to protect the entire type query process.
Fixes: e50092404c1b ("netfilter: nf_tables: add stateful objects")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_tables_api.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index fe6ee16e2dbf4..387eee416b0bf 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -7468,7 +7468,7 @@ static const struct nft_object_type *__nft_obj_type_get(u32 objtype, u8 family)
{
const struct nft_object_type *type;
- list_for_each_entry(type, &nf_tables_objects, list) {
+ list_for_each_entry_rcu(type, &nf_tables_objects, list) {
if (type->family != NFPROTO_UNSPEC &&
type->family != family)
continue;
@@ -7484,9 +7484,13 @@ nft_obj_type_get(struct net *net, u32 objtype, u8 family)
{
const struct nft_object_type *type;
+ rcu_read_lock();
type = __nft_obj_type_get(objtype, family);
- if (type != NULL && try_module_get(type->owner))
+ if (type != NULL && try_module_get(type->owner)) {
+ rcu_read_unlock();
return type;
+ }
+ rcu_read_unlock();
lockdep_nfnl_nft_mutex_not_held();
#ifdef CONFIG_MODULES
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 035/158] netfilter: br_netfilter: skip conntrack input hook for promisc packets
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 034/158] netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 036/158] netfilter: nft_set_pipapo: do not free live element Greg Kroah-Hartman
` (131 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jianbo Liu, Pablo Neira Ayuso, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit 751de2012eafa4d46d8081056761fa0e9cc8a178 ]
For historical reasons, when bridge device is in promisc mode, packets
that are directed to the taps follow bridge input hook path. This patch
adds a workaround to reset conntrack for these packets.
Jianbo Liu reports warning splats in their test infrastructure where
cloned packets reach the br_netfilter input hook to confirm the
conntrack object.
Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has
reached the input hook because it is passed up to the bridge device to
reach the taps.
[ 57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core
[ 57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19
[ 57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1
[ 57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202
[ 57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000
[ 57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000
[ 57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003
[ 57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000
[ 57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800
[ 57.582313] FS: 0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000
[ 57.583040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0
[ 57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 57.585440] Call Trace:
[ 57.585721] <IRQ>
[ 57.585976] ? __warn+0x7d/0x130
[ 57.586323] ? br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.586811] ? report_bug+0xf1/0x1c0
[ 57.587177] ? handle_bug+0x3f/0x70
[ 57.587539] ? exc_invalid_op+0x13/0x60
[ 57.587929] ? asm_exc_invalid_op+0x16/0x20
[ 57.588336] ? br_nf_local_in+0x157/0x180 [br_netfilter]
[ 57.588825] nf_hook_slow+0x3d/0xd0
[ 57.589188] ? br_handle_vlan+0x4b/0x110
[ 57.589579] br_pass_frame_up+0xfc/0x150
[ 57.589970] ? br_port_flags_change+0x40/0x40
[ 57.590396] br_handle_frame_finish+0x346/0x5e0
[ 57.590837] ? ipt_do_table+0x32e/0x430
[ 57.591221] ? br_handle_local_finish+0x20/0x20
[ 57.591656] br_nf_hook_thresh+0x4b/0xf0 [br_netfilter]
[ 57.592286] ? br_handle_local_finish+0x20/0x20
[ 57.592802] br_nf_pre_routing_finish+0x178/0x480 [br_netfilter]
[ 57.593348] ? br_handle_local_finish+0x20/0x20
[ 57.593782] ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat]
[ 57.594279] br_nf_pre_routing+0x24c/0x550 [br_netfilter]
[ 57.594780] ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter]
[ 57.595280] br_handle_frame+0x1f3/0x3d0
[ 57.595676] ? br_handle_local_finish+0x20/0x20
[ 57.596118] ? br_handle_frame_finish+0x5e0/0x5e0
[ 57.596566] __netif_receive_skb_core+0x25b/0xfc0
[ 57.597017] ? __napi_build_skb+0x37/0x40
[ 57.597418] __netif_receive_skb_list_core+0xfb/0x220
Fixes: 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack")
Reported-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bridge/br_input.c | 15 +++++++++++----
net/bridge/br_netfilter_hooks.c | 6 ++++++
net/bridge/br_private.h | 1 +
net/bridge/netfilter/nf_conntrack_bridge.c | 14 ++++++++++----
4 files changed, 28 insertions(+), 8 deletions(-)
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index c729528b5e85f..e09000e38d071 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -30,7 +30,7 @@ br_netif_receive_skb(struct net *net, struct sock *sk, struct sk_buff *skb)
return netif_receive_skb(skb);
}
-static int br_pass_frame_up(struct sk_buff *skb)
+static int br_pass_frame_up(struct sk_buff *skb, bool promisc)
{
struct net_device *indev, *brdev = BR_INPUT_SKB_CB(skb)->brdev;
struct net_bridge *br = netdev_priv(brdev);
@@ -65,6 +65,8 @@ static int br_pass_frame_up(struct sk_buff *skb)
br_multicast_count(br, NULL, skb, br_multicast_igmp_type(skb),
BR_MCAST_DIR_TX);
+ BR_INPUT_SKB_CB(skb)->promisc = promisc;
+
return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
dev_net(indev), NULL, skb, indev, NULL,
br_netif_receive_skb);
@@ -82,6 +84,7 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
struct net_bridge_mcast *brmctx;
struct net_bridge_vlan *vlan;
struct net_bridge *br;
+ bool promisc;
u16 vid = 0;
u8 state;
@@ -137,7 +140,9 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
if (p->flags & BR_LEARNING)
br_fdb_update(br, p, eth_hdr(skb)->h_source, vid, 0);
- local_rcv = !!(br->dev->flags & IFF_PROMISC);
+ promisc = !!(br->dev->flags & IFF_PROMISC);
+ local_rcv = promisc;
+
if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) {
/* by definition the broadcast is also a multicast address */
if (is_broadcast_ether_addr(eth_hdr(skb)->h_dest)) {
@@ -200,7 +205,7 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
unsigned long now = jiffies;
if (test_bit(BR_FDB_LOCAL, &dst->flags))
- return br_pass_frame_up(skb);
+ return br_pass_frame_up(skb, false);
if (now != dst->used)
dst->used = now;
@@ -213,7 +218,7 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
}
if (local_rcv)
- return br_pass_frame_up(skb);
+ return br_pass_frame_up(skb, promisc);
out:
return 0;
@@ -386,6 +391,8 @@ static rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
goto forward;
}
+ BR_INPUT_SKB_CB(skb)->promisc = false;
+
/* The else clause should be hit when nf_hook():
* - returns < 0 (drop/error)
* - returns = 0 (stolen/nf_queue)
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 6ef67030b4db3..d848c84ed030d 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -600,11 +600,17 @@ static unsigned int br_nf_local_in(void *priv,
struct sk_buff *skb,
const struct nf_hook_state *state)
{
+ bool promisc = BR_INPUT_SKB_CB(skb)->promisc;
struct nf_conntrack *nfct = skb_nfct(skb);
const struct nf_ct_hook *ct_hook;
struct nf_conn *ct;
int ret;
+ if (promisc) {
+ nf_reset_ct(skb);
+ return NF_ACCEPT;
+ }
+
if (!nfct || skb->pkt_type == PACKET_HOST)
return NF_ACCEPT;
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 82e63908dce8a..e4f1a08322da9 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -583,6 +583,7 @@ struct br_input_skb_cb {
#endif
u8 proxyarp_replied:1;
u8 src_port_isolated:1;
+ u8 promisc:1;
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
u8 vlan_filtered:1;
#endif
diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c
index d32fce70d797d..6ef04f9fe481b 100644
--- a/net/bridge/netfilter/nf_conntrack_bridge.c
+++ b/net/bridge/netfilter/nf_conntrack_bridge.c
@@ -294,18 +294,24 @@ static unsigned int nf_ct_bridge_pre(void *priv, struct sk_buff *skb,
static unsigned int nf_ct_bridge_in(void *priv, struct sk_buff *skb,
const struct nf_hook_state *state)
{
- enum ip_conntrack_info ctinfo;
+ bool promisc = BR_INPUT_SKB_CB(skb)->promisc;
+ struct nf_conntrack *nfct = skb_nfct(skb);
struct nf_conn *ct;
- if (skb->pkt_type == PACKET_HOST)
+ if (promisc) {
+ nf_reset_ct(skb);
+ return NF_ACCEPT;
+ }
+
+ if (!nfct || skb->pkt_type == PACKET_HOST)
return NF_ACCEPT;
/* nf_conntrack_confirm() cannot handle concurrent clones,
* this happens for broad/multicast frames with e.g. macvlan on top
* of the bridge device.
*/
- ct = nf_ct_get(skb, &ctinfo);
- if (!ct || nf_ct_is_confirmed(ct) || nf_ct_is_template(ct))
+ ct = container_of(nfct, struct nf_conn, ct_general);
+ if (nf_ct_is_confirmed(ct) || nf_ct_is_template(ct))
return NF_ACCEPT;
/* let inet prerouting call conntrack again */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 036/158] netfilter: nft_set_pipapo: do not free live element
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 035/158] netfilter: br_netfilter: skip conntrack input hook for promisc packets Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 037/158] netfilter: flowtable: validate pppoe header Greg Kroah-Hartman
` (130 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pablo Neira Ayuso, Stefano Brivio,
Florian Westphal, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <fw@strlen.de>
[ Upstream commit 3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc ]
Pablo reports a crash with large batches of elements with a
back-to-back add/remove pattern. Quoting Pablo:
add_elem("00000000") timeout 100 ms
...
add_elem("0000000X") timeout 100 ms
del_elem("0000000X") <---------------- delete one that was just added
...
add_elem("00005000") timeout 100 ms
1) nft_pipapo_remove() removes element 0000000X
Then, KASAN shows a splat.
Looking at the remove function there is a chance that we will drop a
rule that maps to a non-deactivated element.
Removal happens in two steps, first we do a lookup for key k and return the
to-be-removed element and mark it as inactive in the next generation.
Then, in a second step, the element gets removed from the set/map.
The _remove function does not work correctly if we have more than one
element that share the same key.
This can happen if we insert an element into a set when the set already
holds an element with same key, but the element mapping to the existing
key has timed out or is not active in the next generation.
In such case its possible that removal will unmap the wrong element.
If this happens, we will leak the non-deactivated element, it becomes
unreachable.
The element that got deactivated (and will be freed later) will
remain reachable in the set data structure, this can result in
a crash when such an element is retrieved during lookup (stale
pointer).
Add a check that the fully matching key does in fact map to the element
that we have marked as inactive in the deactivation step.
If not, we need to continue searching.
Add a bug/warn trap at the end of the function as well, the remove
function must not ever be called with an invisible/unreachable/non-existent
element.
v2: avoid uneeded temporary variable (Stefano)
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nft_set_pipapo.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index a890aa0abad58..69b02a3f1ff05 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -1993,6 +1993,8 @@ static void nft_pipapo_remove(const struct net *net, const struct nft_set *set,
rules_fx = rules_f0;
nft_pipapo_for_each_field(f, i, m) {
+ bool last = i == m->field_count - 1;
+
if (!pipapo_match_field(f, start, rules_fx,
match_start, match_end))
break;
@@ -2005,16 +2007,18 @@ static void nft_pipapo_remove(const struct net *net, const struct nft_set *set,
match_start += NFT_PIPAPO_GROUPS_PADDED_SIZE(f);
match_end += NFT_PIPAPO_GROUPS_PADDED_SIZE(f);
- }
- if (i == m->field_count) {
- priv->dirty = true;
- pipapo_drop(m, rulemap);
- return;
+ if (last && f->mt[rulemap[i].to].e == e) {
+ priv->dirty = true;
+ pipapo_drop(m, rulemap);
+ return;
+ }
}
first_rule += rules_f0;
}
+
+ WARN_ON_ONCE(1); /* elem_priv not found */
}
/**
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 037/158] netfilter: flowtable: validate pppoe header
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 036/158] netfilter: nft_set_pipapo: do not free live element Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 038/158] netfilter: flowtable: incorrect pppoe tuple Greg Kroah-Hartman
` (129 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+b6f07e1c07ef40199081,
Pablo Neira Ayuso, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit 87b3593bed1868b2d9fe096c01bcdf0ea86cbebf ]
Ensure there is sufficient room to access the protocol field of the
PPPoe header. Validate it once before the flowtable lookup, then use a
helper function to access protocol field.
Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/netfilter/nf_flow_table.h | 12 +++++++++++-
net/netfilter/nf_flow_table_inet.c | 3 ++-
net/netfilter/nf_flow_table_ip.c | 8 +++++---
3 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h
index 4a767b3d20b9d..df7775afb92b9 100644
--- a/include/net/netfilter/nf_flow_table.h
+++ b/include/net/netfilter/nf_flow_table.h
@@ -335,7 +335,7 @@ int nf_flow_rule_route_ipv6(struct net *net, struct flow_offload *flow,
int nf_flow_table_offload_init(void);
void nf_flow_table_offload_exit(void);
-static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
+static inline __be16 __nf_flow_pppoe_proto(const struct sk_buff *skb)
{
__be16 proto;
@@ -351,6 +351,16 @@ static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
return 0;
}
+static inline bool nf_flow_pppoe_proto(struct sk_buff *skb, __be16 *inner_proto)
+{
+ if (!pskb_may_pull(skb, PPPOE_SES_HLEN))
+ return false;
+
+ *inner_proto = __nf_flow_pppoe_proto(skb);
+
+ return true;
+}
+
#define NF_FLOW_TABLE_STAT_INC(net, count) __this_cpu_inc((net)->ft.stat->count)
#define NF_FLOW_TABLE_STAT_DEC(net, count) __this_cpu_dec((net)->ft.stat->count)
#define NF_FLOW_TABLE_STAT_INC_ATOMIC(net, count) \
diff --git a/net/netfilter/nf_flow_table_inet.c b/net/netfilter/nf_flow_table_inet.c
index 9505f9d188ff2..6eef15648b7b0 100644
--- a/net/netfilter/nf_flow_table_inet.c
+++ b/net/netfilter/nf_flow_table_inet.c
@@ -21,7 +21,8 @@ nf_flow_offload_inet_hook(void *priv, struct sk_buff *skb,
proto = veth->h_vlan_encapsulated_proto;
break;
case htons(ETH_P_PPP_SES):
- proto = nf_flow_pppoe_proto(skb);
+ if (!nf_flow_pppoe_proto(skb, &proto))
+ return NF_ACCEPT;
break;
default:
proto = skb->protocol;
diff --git a/net/netfilter/nf_flow_table_ip.c b/net/netfilter/nf_flow_table_ip.c
index e45fade764096..9e9e105052dae 100644
--- a/net/netfilter/nf_flow_table_ip.c
+++ b/net/netfilter/nf_flow_table_ip.c
@@ -273,10 +273,11 @@ static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
return NF_STOLEN;
}
-static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
+static bool nf_flow_skb_encap_protocol(struct sk_buff *skb, __be16 proto,
u32 *offset)
{
struct vlan_ethhdr *veth;
+ __be16 inner_proto;
switch (skb->protocol) {
case htons(ETH_P_8021Q):
@@ -287,7 +288,8 @@ static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
}
break;
case htons(ETH_P_PPP_SES):
- if (nf_flow_pppoe_proto(skb) == proto) {
+ if (nf_flow_pppoe_proto(skb, &inner_proto) &&
+ inner_proto == proto) {
*offset += PPPOE_SES_HLEN;
return true;
}
@@ -316,7 +318,7 @@ static void nf_flow_encap_pop(struct sk_buff *skb,
skb_reset_network_header(skb);
break;
case htons(ETH_P_PPP_SES):
- skb->protocol = nf_flow_pppoe_proto(skb);
+ skb->protocol = __nf_flow_pppoe_proto(skb);
skb_pull(skb, PPPOE_SES_HLEN);
skb_reset_network_header(skb);
break;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 038/158] netfilter: flowtable: incorrect pppoe tuple
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 037/158] netfilter: flowtable: validate pppoe header Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 039/158] af_unix: Call manage_oob() for every skb in unix_stream_read_generic() Greg Kroah-Hartman
` (128 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Pablo Neira Ayuso, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso <pablo@netfilter.org>
[ Upstream commit 6db5dc7b351b9569940cd1cf445e237c42cd6d27 ]
pppoe traffic reaching ingress path does not match the flowtable entry
because the pppoe header is expected to be at the network header offset.
This bug causes a mismatch in the flow table lookup, so pppoe packets
enter the classical forwarding path.
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_flow_table_ip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_flow_table_ip.c b/net/netfilter/nf_flow_table_ip.c
index 9e9e105052dae..5383bed3d3e00 100644
--- a/net/netfilter/nf_flow_table_ip.c
+++ b/net/netfilter/nf_flow_table_ip.c
@@ -157,7 +157,7 @@ static void nf_flow_tuple_encap(struct sk_buff *skb,
tuple->encap[i].proto = skb->protocol;
break;
case htons(ETH_P_PPP_SES):
- phdr = (struct pppoe_hdr *)skb_mac_header(skb);
+ phdr = (struct pppoe_hdr *)skb_network_header(skb);
tuple->encap[i].id = ntohs(phdr->sid);
tuple->encap[i].proto = skb->protocol;
break;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 039/158] af_unix: Call manage_oob() for every skb in unix_stream_read_generic().
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 038/158] netfilter: flowtable: incorrect pppoe tuple Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 040/158] af_unix: Dont peek OOB data without MSG_OOB Greg Kroah-Hartman
` (127 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kuniyuki Iwashima, Jakub Kicinski,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima <kuniyu@amazon.com>
[ Upstream commit 283454c8a123072e5c386a5a2b5fc576aa455b6f ]
When we call recv() for AF_UNIX socket, we first peek one skb and
calls manage_oob() to check if the skb is sent with MSG_OOB.
However, when we fetch the next (and the following) skb, manage_oob()
is not called now, leading a wrong behaviour.
Let's say a socket send()s "hello" with MSG_OOB and the peer tries
to recv() 5 bytes with MSG_PEEK. Here, we should get only "hell"
without 'o', but actually not:
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c2.recv(5, MSG_PEEK)
b'hello'
The first skb fills 4 bytes, and the next skb is peeked but not
properly checked by manage_oob().
Let's move up the again label to call manage_oob() for evry skb.
With this patch:
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c2.recv(5, MSG_PEEK)
b'hell'
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240410171016.7621-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/unix/af_unix.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 918724844231e..1340cb86f104c 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -2665,6 +2665,7 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state,
last = skb = skb_peek(&sk->sk_receive_queue);
last_len = last ? last->len : 0;
+again:
#if IS_ENABLED(CONFIG_AF_UNIX_OOB)
if (skb) {
skb = manage_oob(skb, sk, flags, copied);
@@ -2676,7 +2677,6 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state,
}
}
#endif
-again:
if (skb == NULL) {
if (copied >= target)
goto unlock;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 040/158] af_unix: Dont peek OOB data without MSG_OOB.
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 039/158] af_unix: Call manage_oob() for every skb in unix_stream_read_generic() Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 041/158] net: sparx5: flower: fix fragment flags handling Greg Kroah-Hartman
` (126 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Kuniyuki Iwashima, Jakub Kicinski,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima <kuniyu@amazon.com>
[ Upstream commit 22dd70eb2c3d754862964377a75abafd3167346b ]
Currently, we can read OOB data without MSG_OOB by using MSG_PEEK
when OOB data is sitting on the front row, which is apparently
wrong.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'a', MSG_OOB)
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
b'a'
If manage_oob() is called when no data has been copied, we only
check if the socket enables SO_OOBINLINE or MSG_PEEK is not used.
Otherwise, the skb is returned as is.
However, here we should return NULL if MSG_PEEK is set and no data
has been copied.
Also, in such a case, we should not jump to the redo label because
we will be caught in the loop and hog the CPU until normal data
comes in.
Then, we need to handle skb == NULL case with the if-clause below
the manage_oob() block.
With this patch:
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'a', MSG_OOB)
1
>>> c2.recv(1, MSG_PEEK | MSG_DONTWAIT)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240410171016.7621-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/unix/af_unix.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 1340cb86f104c..6eab35a5e2f3b 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -2587,7 +2587,9 @@ static struct sk_buff *manage_oob(struct sk_buff *skb, struct sock *sk,
WRITE_ONCE(u->oob_skb, NULL);
consume_skb(skb);
}
- } else if (!(flags & MSG_PEEK)) {
+ } else if (flags & MSG_PEEK) {
+ skb = NULL;
+ } else {
skb_unlink(skb, &sk->sk_receive_queue);
WRITE_ONCE(u->oob_skb, NULL);
if (!WARN_ON_ONCE(skb_unref(skb)))
@@ -2669,11 +2671,9 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state,
#if IS_ENABLED(CONFIG_AF_UNIX_OOB)
if (skb) {
skb = manage_oob(skb, sk, flags, copied);
- if (!skb) {
+ if (!skb && copied) {
unix_state_unlock(sk);
- if (copied)
- break;
- goto redo;
+ break;
}
}
#endif
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 041/158] net: sparx5: flower: fix fragment flags handling
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 040/158] af_unix: Dont peek OOB data without MSG_OOB Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 042/158] net/mlx5: Lag, restore buckets number to default after hash LAG deactivation Greg Kroah-Hartman
` (125 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Asbjørn Sloth Tønnesen,
Steen Hegelund, Daniel Machon, Jacob Keller, Jakub Kicinski,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asbjørn Sloth Tønnesen <ast@fiberby.net>
[ Upstream commit 68aba00483c7c4102429bcdfdece7289a8ab5c8e ]
I noticed that only 3 out of the 4 input bits were used,
mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked.
In order to avoid a complicated maze, I converted it to
use a 16 byte mapping table.
As shown in the table below the old heuristics doesn't
always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1
then it used to only match follow-up fragment packets.
Here are all the combinations, and their resulting new/old
VCAP key/mask filter:
/- FLOW_DIS_IS_FRAGMENT (key/mask)
| /- FLOW_DIS_FIRST_FRAG (key/mask)
| | /-- new VCAP fragment (key/mask)
v v v v- old VCAP fragment (key/mask)
0/0 0/0 -/- -/- impossible (due to entry cond. on mask)
0/0 0/1 -/- 0/3 !! invalid (can't match non-fragment + follow-up frag)
0/0 1/0 -/- -/- impossible (key > mask)
0/0 1/1 1/3 1/3 first fragment
0/1 0/0 0/3 3/3 !! not fragmented
0/1 0/1 0/3 3/3 !! not fragmented (+ not first fragment)
0/1 1/0 -/- -/- impossible (key > mask)
0/1 1/1 -/- 1/3 !! invalid (non-fragment and first frag)
1/0 0/0 -/- -/- impossible (key > mask)
1/0 0/1 -/- -/- impossible (key > mask)
1/0 1/0 -/- -/- impossible (key > mask)
1/0 1/1 -/- -/- impossible (key > mask)
1/1 0/0 1/1 3/3 !! some fragment
1/1 0/1 3/3 3/3 follow-up fragment
1/1 1/0 -/- -/- impossible (key > mask)
1/1 1/1 1/3 1/3 first fragment
In the datasheet the VCAP fragment values are documented as:
0 = no fragment
1 = initial fragment
2 = suspicious fragment
3 = valid follow-up fragment
Result: 3 combinations match the old behavior,
3 combinations have been corrected,
2 combinations are now invalid, and fail,
8 combinations are impossible.
It should now be aligned with how FLOW_DIS_IS_FRAGMENT
and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in
net/core/flow_dissector.c
Since the VCAP fragment values are not a bitfield, we have
to ignore the suspicious fragment value, eg. when matching
on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1.
Only compile tested, and logic tested in userspace, as I
unfortunately don't have access to this switch chip (yet).
Fixes: d6c2964db3fe ("net: microchip: sparx5: Adding more tc flower keys for the IS2 VCAP")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240411111321.114095-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../microchip/sparx5/sparx5_tc_flower.c | 61 ++++++++++++-------
1 file changed, 40 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c b/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c
index 523e0c470894f..55f255a3c9db6 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c
@@ -36,6 +36,27 @@ struct sparx5_tc_flower_template {
u16 l3_proto; /* protocol specified in the template */
};
+/* SparX-5 VCAP fragment types:
+ * 0 = no fragment, 1 = initial fragment,
+ * 2 = suspicious fragment, 3 = valid follow-up fragment
+ */
+enum { /* key / mask */
+ FRAG_NOT = 0x03, /* 0 / 3 */
+ FRAG_SOME = 0x11, /* 1 / 1 */
+ FRAG_FIRST = 0x13, /* 1 / 3 */
+ FRAG_LATER = 0x33, /* 3 / 3 */
+ FRAG_INVAL = 0xff, /* invalid */
+};
+
+/* Flower fragment flag to VCAP fragment type mapping */
+static const u8 sparx5_vcap_frag_map[4][4] = { /* is_frag */
+ { FRAG_INVAL, FRAG_INVAL, FRAG_INVAL, FRAG_FIRST }, /* 0/0 */
+ { FRAG_NOT, FRAG_NOT, FRAG_INVAL, FRAG_INVAL }, /* 0/1 */
+ { FRAG_INVAL, FRAG_INVAL, FRAG_INVAL, FRAG_INVAL }, /* 1/0 */
+ { FRAG_SOME, FRAG_LATER, FRAG_INVAL, FRAG_FIRST } /* 1/1 */
+ /* 0/0 0/1 1/0 1/1 <-- first_frag */
+};
+
static int
sparx5_tc_flower_es0_tpid(struct vcap_tc_flower_parse_usage *st)
{
@@ -145,29 +166,27 @@ sparx5_tc_flower_handler_control_usage(struct vcap_tc_flower_parse_usage *st)
flow_rule_match_control(st->frule, &mt);
if (mt.mask->flags) {
- if (mt.mask->flags & FLOW_DIS_FIRST_FRAG) {
- if (mt.key->flags & FLOW_DIS_FIRST_FRAG) {
- value = 1; /* initial fragment */
- mask = 0x3;
- } else {
- if (mt.mask->flags & FLOW_DIS_IS_FRAGMENT) {
- value = 3; /* follow up fragment */
- mask = 0x3;
- } else {
- value = 0; /* no fragment */
- mask = 0x3;
- }
- }
- } else {
- if (mt.mask->flags & FLOW_DIS_IS_FRAGMENT) {
- value = 3; /* follow up fragment */
- mask = 0x3;
- } else {
- value = 0; /* no fragment */
- mask = 0x3;
- }
+ u8 is_frag_key = !!(mt.key->flags & FLOW_DIS_IS_FRAGMENT);
+ u8 is_frag_mask = !!(mt.mask->flags & FLOW_DIS_IS_FRAGMENT);
+ u8 is_frag_idx = (is_frag_key << 1) | is_frag_mask;
+
+ u8 first_frag_key = !!(mt.key->flags & FLOW_DIS_FIRST_FRAG);
+ u8 first_frag_mask = !!(mt.mask->flags & FLOW_DIS_FIRST_FRAG);
+ u8 first_frag_idx = (first_frag_key << 1) | first_frag_mask;
+
+ /* Lookup verdict based on the 2 + 2 input bits */
+ u8 vdt = sparx5_vcap_frag_map[is_frag_idx][first_frag_idx];
+
+ if (vdt == FRAG_INVAL) {
+ NL_SET_ERR_MSG_MOD(st->fco->common.extack,
+ "Match on invalid fragment flag combination");
+ return -EINVAL;
}
+ /* Extract VCAP fragment key and mask from verdict */
+ value = (vdt >> 4) & 0x3;
+ mask = vdt & 0x3;
+
err = vcap_rule_add_key_u32(st->vrule,
VCAP_KF_L3_FRAGMENT_TYPE,
value, mask);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 042/158] net/mlx5: Lag, restore buckets number to default after hash LAG deactivation
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 041/158] net: sparx5: flower: fix fragment flags handling Greg Kroah-Hartman
@ 2024-04-23 21:37 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 043/158] net/mlx5e: Prevent deadlock while disabling aRFS Greg Kroah-Hartman
` (124 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:37 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shay Drory, Maor Gottlieb,
Tariq Toukan, Jakub Kicinski, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shay Drory <shayd@nvidia.com>
[ Upstream commit 37cc10da3a50e6d0cb9808a90b7da9b4868794dd ]
The cited patch introduces the concept of buckets in LAG in hash mode.
However, the patch doesn't clear the number of buckets in the LAG
deactivation. This results in using the wrong number of buckets in
case user create a hash mode LAG and afterwards create a non-hash
mode LAG.
Hence, restore buckets number to default after hash mode LAG
deactivation.
Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240411115444.374475-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index af3fac090b828..e51cac1e1811e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -703,8 +703,10 @@ int mlx5_deactivate_lag(struct mlx5_lag *ldev)
return err;
}
- if (test_bit(MLX5_LAG_MODE_FLAG_HASH_BASED, &flags))
+ if (test_bit(MLX5_LAG_MODE_FLAG_HASH_BASED, &flags)) {
mlx5_lag_port_sel_destroy(ldev);
+ ldev->buckets = 1;
+ }
if (mlx5_lag_has_drop_rule(ldev))
mlx5_lag_drop_rule_cleanup(ldev);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 043/158] net/mlx5e: Prevent deadlock while disabling aRFS
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2024-04-23 21:37 ` [PATCH 6.6 042/158] net/mlx5: Lag, restore buckets number to default after hash LAG deactivation Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 044/158] net: change maximum number of UDP segments to 128 Greg Kroah-Hartman
` (123 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Carolina Jubran, Tariq Toukan,
Jakub Kicinski, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Carolina Jubran <cjubran@nvidia.com>
[ Upstream commit fef965764cf562f28afb997b626fc7c3cec99693 ]
When disabling aRFS under the `priv->state_lock`, any scheduled
aRFS works are canceled using the `cancel_work_sync` function,
which waits for the work to end if it has already started.
However, while waiting for the work handler, the handler will
try to acquire the `state_lock` which is already acquired.
The worker acquires the lock to delete the rules if the state
is down, which is not the worker's responsibility since
disabling aRFS deletes the rules.
Add an aRFS state variable, which indicates whether the aRFS is
enabled and prevent adding rules when the aRFS is disabled.
Kernel log:
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I
------------------------------------------------------
ethtool/386089 is trying to acquire lock:
ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0
but task is already holding lock:
ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&priv->state_lock){+.+.}-{3:3}:
__mutex_lock+0x80/0xc90
arfs_handle_work+0x4b/0x3b0 [mlx5_core]
process_one_work+0x1dc/0x4a0
worker_thread+0x1bf/0x3c0
kthread+0xd7/0x100
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20
-> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}:
__lock_acquire+0x17b4/0x2c80
lock_acquire+0xd0/0x2b0
__flush_work+0x7a/0x4e0
__cancel_work_timer+0x131/0x1c0
arfs_del_rules+0x143/0x1e0 [mlx5_core]
mlx5e_arfs_disable+0x1b/0x30 [mlx5_core]
mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core]
ethnl_set_channels+0x28f/0x3b0
ethnl_default_set_doit+0xec/0x240
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x188/0x2c0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1a1/0x270
netlink_sendmsg+0x214/0x460
__sock_sendmsg+0x38/0x60
__sys_sendto+0x113/0x170
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&priv->state_lock);
lock((work_completion)(&rule->arfs_work));
lock(&priv->state_lock);
lock((work_completion)(&rule->arfs_work));
*** DEADLOCK ***
3 locks held by ethtool/386089:
#0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40
#1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240
#2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core]
stack backtrace:
CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x60/0xa0
check_noncircular+0x144/0x160
__lock_acquire+0x17b4/0x2c80
lock_acquire+0xd0/0x2b0
? __flush_work+0x74/0x4e0
? save_trace+0x3e/0x360
? __flush_work+0x74/0x4e0
__flush_work+0x7a/0x4e0
? __flush_work+0x74/0x4e0
? __lock_acquire+0xa78/0x2c80
? lock_acquire+0xd0/0x2b0
? mark_held_locks+0x49/0x70
__cancel_work_timer+0x131/0x1c0
? mark_held_locks+0x49/0x70
arfs_del_rules+0x143/0x1e0 [mlx5_core]
mlx5e_arfs_disable+0x1b/0x30 [mlx5_core]
mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core]
ethnl_set_channels+0x28f/0x3b0
ethnl_default_set_doit+0xec/0x240
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x188/0x2c0
? ethnl_ops_begin+0xb0/0xb0
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1a1/0x270
netlink_sendmsg+0x214/0x460
__sock_sendmsg+0x38/0x60
__sys_sendto+0x113/0x170
? do_user_addr_fault+0x53f/0x8f0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
</TASK>
Fixes: 45bf454ae884 ("net/mlx5e: Enabling aRFS mechanism")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240411115444.374475-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/mellanox/mlx5/core/en_arfs.c | 27 +++++++++++--------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c
index e66f486faafe1..415fec7763bd2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c
@@ -45,6 +45,10 @@ struct arfs_table {
struct hlist_head rules_hash[ARFS_HASH_SIZE];
};
+enum {
+ MLX5E_ARFS_STATE_ENABLED,
+};
+
enum arfs_type {
ARFS_IPV4_TCP,
ARFS_IPV6_TCP,
@@ -59,6 +63,7 @@ struct mlx5e_arfs_tables {
spinlock_t arfs_lock;
int last_filter_id;
struct workqueue_struct *wq;
+ unsigned long state;
};
struct arfs_tuple {
@@ -169,6 +174,8 @@ int mlx5e_arfs_enable(struct mlx5e_flow_steering *fs)
return err;
}
}
+ set_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state);
+
return 0;
}
@@ -454,6 +461,8 @@ static void arfs_del_rules(struct mlx5e_flow_steering *fs)
int i;
int j;
+ clear_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state);
+
spin_lock_bh(&arfs->arfs_lock);
mlx5e_for_each_arfs_rule(rule, htmp, arfs->arfs_tables, i, j) {
hlist_del_init(&rule->hlist);
@@ -626,17 +635,8 @@ static void arfs_handle_work(struct work_struct *work)
struct mlx5_flow_handle *rule;
arfs = mlx5e_fs_get_arfs(priv->fs);
- mutex_lock(&priv->state_lock);
- if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
- spin_lock_bh(&arfs->arfs_lock);
- hlist_del(&arfs_rule->hlist);
- spin_unlock_bh(&arfs->arfs_lock);
-
- mutex_unlock(&priv->state_lock);
- kfree(arfs_rule);
- goto out;
- }
- mutex_unlock(&priv->state_lock);
+ if (!test_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state))
+ return;
if (!arfs_rule->rule) {
rule = arfs_add_rule(priv, arfs_rule);
@@ -752,6 +752,11 @@ int mlx5e_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
return -EPROTONOSUPPORT;
spin_lock_bh(&arfs->arfs_lock);
+ if (!test_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state)) {
+ spin_unlock_bh(&arfs->arfs_lock);
+ return -EPERM;
+ }
+
arfs_rule = arfs_find_rule(arfs_t, &fk);
if (arfs_rule) {
if (arfs_rule->rxq == rxq_index || work_busy(&arfs_rule->arfs_work)) {
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 044/158] net: change maximum number of UDP segments to 128
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 043/158] net/mlx5e: Prevent deadlock while disabling aRFS Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 045/158] octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementation Greg Kroah-Hartman
` (122 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuri Benditovich, Willem de Bruijn,
David S. Miller, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuri Benditovich <yuri.benditovich@daynix.com>
[ Upstream commit 1382e3b6a3500c245e5278c66d210c02926f804f ]
The commit fc8b2a619469
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/udp.h | 2 +-
tools/testing/selftests/net/udpgso.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 94e63b2695406..00790bb5cbde6 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -105,7 +105,7 @@ struct udp_sock {
#define udp_assign_bit(nr, sk, val) \
assign_bit(UDP_FLAGS_##nr, &udp_sk(sk)->udp_flags, val)
-#define UDP_MAX_SEGMENTS (1 << 6UL)
+#define UDP_MAX_SEGMENTS (1 << 7UL)
#define udp_sk(ptr) container_of_const(ptr, struct udp_sock, inet.sk)
diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c
index 7badaf215de28..b02080d09fbc0 100644
--- a/tools/testing/selftests/net/udpgso.c
+++ b/tools/testing/selftests/net/udpgso.c
@@ -34,7 +34,7 @@
#endif
#ifndef UDP_MAX_SEGMENTS
-#define UDP_MAX_SEGMENTS (1 << 6UL)
+#define UDP_MAX_SEGMENTS (1 << 7UL)
#endif
#define CONST_MTU_TEST 1500
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 045/158] octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementation
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 044/158] net: change maximum number of UDP segments to 128 Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 046/158] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only Greg Kroah-Hartman
` (121 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Asbjørn Sloth Tønnesen,
Jacob Keller, David S. Miller, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Asbjørn Sloth Tønnesen <ast@fiberby.net>
[ Upstream commit 75ce9506ee3dc66648a7d74ab3b0acfa364d6d43 ]
Upon reviewing the flower control flags handling in
this driver, I notice that the key wasn't being used,
only the mask.
Ie. `tc flower ... ip_flags nofrag` was hardware
offloaded as `... ip_flags frag`.
Only compile tested, no access to HW.
Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
index 423ce54eaea69..46bdbee9d38ad 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
@@ -588,6 +588,7 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_CONTROL)) {
struct flow_match_control match;
+ u32 val;
flow_rule_match_control(rule, &match);
if (match.mask->flags & FLOW_DIS_FIRST_FRAG) {
@@ -596,12 +597,14 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node,
}
if (match.mask->flags & FLOW_DIS_IS_FRAGMENT) {
+ val = match.key->flags & FLOW_DIS_IS_FRAGMENT;
if (ntohs(flow_spec->etype) == ETH_P_IP) {
- flow_spec->ip_flag = IPV4_FLAG_MORE;
+ flow_spec->ip_flag = val ? IPV4_FLAG_MORE : 0;
flow_mask->ip_flag = IPV4_FLAG_MORE;
req->features |= BIT_ULL(NPC_IPFRAG_IPV4);
} else if (ntohs(flow_spec->etype) == ETH_P_IPV6) {
- flow_spec->next_header = IPPROTO_FRAGMENT;
+ flow_spec->next_header = val ?
+ IPPROTO_FRAGMENT : 0;
flow_mask->next_header = 0xff;
req->features |= BIT_ULL(NPC_IPFRAG_IPV6);
} else {
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 046/158] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 045/158] octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementation Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 047/158] net: stmmac: Fix max-speed being ignored on queue re-init Greg Kroah-Hartman
` (120 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Serge Semin, Romain Gantois,
Paolo Abeni, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Serge Semin <fancer.lancer@gmail.com>
[ Upstream commit 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b ]
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 7 +++++++
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++----------------
2 files changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 683c34e609638..434e306876b41 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -71,6 +71,13 @@ static void dwmac4_core_init(struct mac_device_info *hw,
static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
{
priv->phylink_config.mac_capabilities |= MAC_2500FD;
+
+ if (priv->plat->tx_queues_to_use > 1)
+ priv->phylink_config.mac_capabilities &=
+ ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+ else
+ priv->phylink_config.mac_capabilities |=
+ (MAC_10HD | MAC_100HD | MAC_1000HD);
}
static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d1adb102a1d49..f3dbbc900d498 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev)
return ret;
}
-static void stmmac_set_half_duplex(struct stmmac_priv *priv)
-{
- /* Half-Duplex can only work with single tx queue */
- if (priv->plat->tx_queues_to_use > 1)
- priv->phylink_config.mac_capabilities &=
- ~(MAC_10HD | MAC_100HD | MAC_1000HD);
- else
- priv->phylink_config.mac_capabilities |=
- (MAC_10HD | MAC_100HD | MAC_1000HD);
-}
-
static int stmmac_phy_setup(struct stmmac_priv *priv)
{
struct stmmac_mdio_bus_data *mdio_bus_data;
@@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
priv->phylink_config.supported_interfaces);
priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10FD | MAC_100FD |
- MAC_1000FD;
-
- stmmac_set_half_duplex(priv);
+ MAC_10 | MAC_100 | MAC_1000;
/* Get the MAC specific capabilities */
stmmac_mac_phylink_get_caps(priv);
@@ -7197,7 +7183,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
priv->rss.table[i] = ethtool_rxfh_indir_default(i,
rx_cnt);
- stmmac_set_half_duplex(priv);
+ stmmac_mac_phylink_get_caps(priv);
+
stmmac_napi_add(dev);
if (netif_running(dev))
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 047/158] net: stmmac: Fix max-speed being ignored on queue re-init
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 046/158] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 048/158] net: stmmac: Fix IP-cores specific MAC capabilities Greg Kroah-Hartman
` (119 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Serge Semin, Romain Gantois,
Paolo Abeni, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Serge Semin <fancer.lancer@gmail.com>
[ Upstream commit 59c3d6ca6cbded6c6599e975b42a9d6a27fcbaf2 ]
It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.
Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.
Fixes: 95201f36f395 ("net: stmmac: update MAC capabilities when tx queues are updated")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f3dbbc900d498..2479e9a5f9d22 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7170,6 +7170,7 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
{
struct stmmac_priv *priv = netdev_priv(dev);
int ret = 0, i;
+ int max_speed;
if (netif_running(dev))
stmmac_release(dev);
@@ -7185,6 +7186,10 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
stmmac_mac_phylink_get_caps(priv);
+ max_speed = priv->plat->max_speed;
+ if (max_speed)
+ phylink_limit_mac_speed(&priv->phylink_config, max_speed);
+
stmmac_napi_add(dev);
if (netif_running(dev))
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 048/158] net: stmmac: Fix IP-cores specific MAC capabilities
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 047/158] net: stmmac: Fix max-speed being ignored on queue re-init Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 049/158] ice: tc: check src_vsi in case of traffic from VF Greg Kroah-Hartman
` (118 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Russell King (Oracle),
Serge Semin, Romain Gantois, Paolo Abeni, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Serge Semin <fancer.lancer@gmail.com>
[ Upstream commit 9cb54af214a7cdc91577ec083e5569f2ce2c86d8 ]
Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:
DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100
DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD
DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD
DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.
Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.
Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.
Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++
.../ethernet/stmicro/stmmac/dwmac1000_core.c | 2 ++
.../ethernet/stmicro/stmmac/dwmac100_core.c | 2 ++
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++------
.../ethernet/stmicro/stmmac/dwxgmac2_core.c | 18 ++++++++----------
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++++---
7 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index b0dd8adce3560..4dbc076f72d65 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -550,6 +550,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp;
extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
struct mac_link {
+ u32 caps;
u32 speed_mask;
u32 speed10;
u32 speed100;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 51f121f867457..63998d65fef8e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
priv->dev->priv_flags |= IFF_UNICAST_FLT;
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
/* The loopback bit seems to be re-set when link change
* Simply mask it each time
* Speed 10/100/1000 are set in BIT(2)/BIT(3)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 3927609abc441..8555299443f4e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
mac->link.duplex = GMAC_CONTROL_DM;
mac->link.speed10 = GMAC_CONTROL_PS;
mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index a6e8d7bd95886..7667d103cd0eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv)
dev_info(priv->device, "\tDWMAC100\n");
mac->pcsr = priv->ioaddr;
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
mac->link.duplex = MAC_CONTROL_F;
mac->link.speed10 = 0;
mac->link.speed100 = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 434e306876b41..4ead0ddf43a7a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -70,14 +70,10 @@ static void dwmac4_core_init(struct mac_device_info *hw,
static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
{
- priv->phylink_config.mac_capabilities |= MAC_2500FD;
-
if (priv->plat->tx_queues_to_use > 1)
- priv->phylink_config.mac_capabilities &=
- ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+ priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
else
- priv->phylink_config.mac_capabilities |=
- (MAC_10HD | MAC_100HD | MAC_1000HD);
+ priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD);
}
static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
@@ -1354,6 +1350,8 @@ int dwmac4_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
mac->link.duplex = GMAC_CONFIG_DM;
mac->link.speed10 = GMAC_CONFIG_PS;
mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 24c53b7255a2e..8bc317d2f7a61 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw,
writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN);
}
-static void xgmac_phylink_get_caps(struct stmmac_priv *priv)
-{
- priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD |
- MAC_10000FD | MAC_25000FD |
- MAC_40000FD | MAC_50000FD |
- MAC_100000FD;
-}
-
static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable)
{
u32 tx = readl(ioaddr + XGMAC_TX_CONFIG);
@@ -1591,7 +1583,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *
const struct stmmac_ops dwxgmac210_ops = {
.core_init = dwxgmac2_core_init,
- .phylink_get_caps = xgmac_phylink_get_caps,
.set_mac = dwxgmac2_set_mac,
.rx_ipc = dwxgmac2_rx_ipc,
.rx_queue_enable = dwxgmac2_rx_queue_enable,
@@ -1653,7 +1644,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
const struct stmmac_ops dwxlgmac2_ops = {
.core_init = dwxgmac2_core_init,
- .phylink_get_caps = xgmac_phylink_get_caps,
.set_mac = dwxgmac2_set_mac,
.rx_ipc = dwxgmac2_rx_ipc,
.rx_queue_enable = dwxlgmac2_rx_queue_enable,
@@ -1714,6 +1704,9 @@ int dwxgmac2_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_1000FD | MAC_2500FD | MAC_5000FD |
+ MAC_10000FD;
mac->link.duplex = 0;
mac->link.speed10 = XGMAC_CONFIG_SS_10_MII;
mac->link.speed100 = XGMAC_CONFIG_SS_100_MII;
@@ -1751,6 +1744,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_1000FD | MAC_2500FD | MAC_5000FD |
+ MAC_10000FD | MAC_25000FD |
+ MAC_40000FD | MAC_50000FD |
+ MAC_100000FD;
mac->link.duplex = 0;
mac->link.speed1000 = XLGMAC_CONFIG_SS_1000;
mac->link.speed2500 = XLGMAC_CONFIG_SS_2500;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 2479e9a5f9d22..19c58ad8df345 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1225,12 +1225,11 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
xpcs_get_interfaces(priv->hw->xpcs,
priv->phylink_config.supported_interfaces);
- priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10 | MAC_100 | MAC_1000;
-
/* Get the MAC specific capabilities */
stmmac_mac_phylink_get_caps(priv);
+ priv->phylink_config.mac_capabilities = priv->hw->link.caps;
+
max_speed = priv->plat->max_speed;
if (max_speed)
phylink_limit_mac_speed(&priv->phylink_config, max_speed);
@@ -7186,6 +7185,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
stmmac_mac_phylink_get_caps(priv);
+ priv->phylink_config.mac_capabilities = priv->hw->link.caps;
+
max_speed = priv->plat->max_speed;
if (max_speed)
phylink_limit_mac_speed(&priv->phylink_config, max_speed);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 049/158] ice: tc: check src_vsi in case of traffic from VF
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 048/158] net: stmmac: Fix IP-cores specific MAC capabilities Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 050/158] ice: tc: allow zero flags in parsing tc flower Greg Kroah-Hartman
` (117 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jedrzej Jagielski,
Sridhar Samudrala, Michal Swiatkowski, Simon Horman,
Sujai Buvaneswaran, Tony Nguyen, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
[ Upstream commit 428051600cb4e5a61d81aba3f8009b6c4f5e7582 ]
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_tc_lib.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
index dd03cb69ad26b..f111fdd6a6ef7 100644
--- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
@@ -28,6 +28,8 @@ ice_tc_count_lkups(u32 flags, struct ice_tc_flower_lyr_2_4_hdrs *headers,
* - ICE_TC_FLWR_FIELD_VLAN_TPID (present if specified)
* - Tunnel flag (present if tunnel)
*/
+ if (fltr->direction == ICE_ESWITCH_FLTR_EGRESS)
+ lkups_cnt++;
if (flags & ICE_TC_FLWR_FIELD_TENANT_ID)
lkups_cnt++;
@@ -363,6 +365,11 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
/* Always add direction metadata */
ice_rule_add_direction_metadata(&list[ICE_TC_METADATA_LKUP_IDX]);
+ if (tc_fltr->direction == ICE_ESWITCH_FLTR_EGRESS) {
+ ice_rule_add_src_vsi_metadata(&list[i]);
+ i++;
+ }
+
rule_info->tun_type = ice_sw_type_from_tunnel(tc_fltr->tunnel_type);
if (tc_fltr->tunnel_type != TNL_LAST) {
i = ice_tc_fill_tunnel_outer(flags, tc_fltr, list, i);
@@ -779,6 +786,7 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr)
/* specify the cookie as filter_rule_id */
rule_info.fltr_rule_id = fltr->cookie;
+ rule_info.src_vsi = vsi->idx;
ret = ice_add_adv_rule(hw, list, lkups_cnt, &rule_info, &rule_added);
if (ret == -EEXIST) {
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 050/158] ice: tc: allow zero flags in parsing tc flower
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 049/158] ice: tc: check src_vsi in case of traffic from VF Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 051/158] ice: Fix checking for unsupported keys on non-tunnel device Greg Kroah-Hartman
` (116 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Wojciech Drewek, Michal Swiatkowski,
Simon Horman, Sujai Buvaneswaran, Tony Nguyen, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
[ Upstream commit 73278715725a8347032acf233082ca4eb31e6a56 ]
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_tc_lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
index f111fdd6a6ef7..9c97c99feac3d 100644
--- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
@@ -738,7 +738,7 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr)
int ret;
int i;
- if (!flags || (flags & ICE_TC_FLWR_FIELD_ENC_SRC_L4_PORT)) {
+ if (flags & ICE_TC_FLWR_FIELD_ENC_SRC_L4_PORT) {
NL_SET_ERR_MSG_MOD(fltr->extack, "Unsupported encap field(s)");
return -EOPNOTSUPP;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 051/158] ice: Fix checking for unsupported keys on non-tunnel device
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 050/158] ice: tc: allow zero flags in parsing tc flower Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 052/158] tun: limit printing rate when illegal packet received by tun dev Greg Kroah-Hartman
` (115 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michal Swiatkowski, Marcin Szycik,
Jacob Keller, Sujai Buvaneswaran, Tony Nguyen, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcin Szycik <marcin.szycik@linux.intel.com>
[ Upstream commit 2cca35f5dd78b9f8297c879c5db5ab137c5d86c3 ]
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ice/ice_tc_lib.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
index 9c97c99feac3d..76ad5930c0102 100644
--- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
@@ -1448,7 +1448,10 @@ ice_parse_cls_flower(struct net_device *filter_dev, struct ice_vsi *vsi,
(BIT_ULL(FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS) |
BIT_ULL(FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS) |
BIT_ULL(FLOW_DISSECTOR_KEY_ENC_KEYID) |
- BIT_ULL(FLOW_DISSECTOR_KEY_ENC_PORTS))) {
+ BIT_ULL(FLOW_DISSECTOR_KEY_ENC_PORTS) |
+ BIT_ULL(FLOW_DISSECTOR_KEY_ENC_IP) |
+ BIT_ULL(FLOW_DISSECTOR_KEY_ENC_OPTS) |
+ BIT_ULL(FLOW_DISSECTOR_KEY_ENC_CONTROL))) {
NL_SET_ERR_MSG_MOD(fltr->extack, "Tunnel key used, but device isn't a tunnel");
return -EOPNOTSUPP;
} else {
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 052/158] tun: limit printing rate when illegal packet received by tun dev
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 051/158] ice: Fix checking for unsupported keys on non-tunnel device Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 053/158] net: dsa: mt7530: fix mirroring frames received on local port Greg Kroah-Hartman
` (114 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Lei Chen, Willem de Bruijn,
Jason Wang, Eric Dumazet, Michael S. Tsirkin, Jakub Kicinski,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lei Chen <lei.chen@smartx.com>
[ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ]
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980"
#0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
[exception RIP: io_serial_in+20]
RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002
RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000
RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0
RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f
R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020
R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
#12 [ffffa65531497b68] printk at ffffffff89318306
#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
#18 [ffffa65531497f10] kthread at ffffffff892d2e72
#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f
Fixes: ef3db4a59542 ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/tun.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 8f95a562b8d0c..86515f0c2b6c1 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2132,14 +2132,16 @@ static ssize_t tun_put_user(struct tun_struct *tun,
tun_is_little_endian(tun), true,
vlan_hlen)) {
struct skb_shared_info *sinfo = skb_shinfo(skb);
- pr_err("unexpected GSO type: "
- "0x%x, gso_size %d, hdr_len %d\n",
- sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size),
- tun16_to_cpu(tun, gso.hdr_len));
- print_hex_dump(KERN_ERR, "tun: ",
- DUMP_PREFIX_NONE,
- 16, 1, skb->head,
- min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true);
+
+ if (net_ratelimit()) {
+ netdev_err(tun->dev, "unexpected GSO type: 0x%x, gso_size %d, hdr_len %d\n",
+ sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size),
+ tun16_to_cpu(tun, gso.hdr_len));
+ print_hex_dump(KERN_ERR, "tun: ",
+ DUMP_PREFIX_NONE,
+ 16, 1, skb->head,
+ min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true);
+ }
WARN_ON_ONCE(1);
return -EINVAL;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 053/158] net: dsa: mt7530: fix mirroring frames received on local port
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 052/158] tun: limit printing rate when illegal packet received by tun dev Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 054/158] net: dsa: mt7530: fix port mirroring for MT7988 SoC switch Greg Kroah-Hartman
` (113 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arınç ÜNAL,
David S. Miller, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arınç ÜNAL <arinc.unal@arinc9.com>
[ Upstream commit d59cf049c8378677053703e724808836f180888e ]
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mt7530.c | 6 ++++++
drivers/net/dsa/mt7530.h | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 88f081672f6fb..a123bb832db91 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2518,6 +2518,9 @@ mt7530_setup(struct dsa_switch *ds)
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
+ /* Allow mirroring frames received on the local port (monitor port). */
+ mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
/* Setup VLAN ID 0 for VLAN-unaware bridges */
ret = mt7530_setup_vlan0(priv);
if (ret)
@@ -2626,6 +2629,9 @@ mt7531_setup_common(struct dsa_switch *ds)
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
+ /* Allow mirroring frames received on the local port (monitor port). */
+ mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ddefeb69afda1..9388c1205bea2 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -32,6 +32,10 @@ enum mt753x_id {
#define SYSC_REG_RSTCTRL 0x34
#define RESET_MCM BIT(2)
+/* Register for ARL global control */
+#define MT753X_AGC 0xc
+#define LOCAL_EN BIT(7)
+
/* Registers to mac forward control for unknown frames */
#define MT7530_MFC 0x10
#define BC_FFP(x) (((x) & 0xff) << 24)
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 054/158] net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 053/158] net: dsa: mt7530: fix mirroring frames received on local port Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 055/158] s390/ism: Properly fix receive message buffer allocation Greg Kroah-Hartman
` (112 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arınç ÜNAL,
Daniel Golle, David S. Miller, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arınç ÜNAL <arinc.unal@arinc9.com>
[ Upstream commit 2c606d138518cc69f09c35929abc414a99e3a28f ]
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mt7530.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a123bb832db91..ea59f19a724c9 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1948,14 +1948,16 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port,
static int mt753x_mirror_port_get(unsigned int id, u32 val)
{
- return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) :
- MIRROR_PORT(val);
+ return (id == ID_MT7531 || id == ID_MT7988) ?
+ MT7531_MIRROR_PORT_GET(val) :
+ MIRROR_PORT(val);
}
static int mt753x_mirror_port_set(unsigned int id, u32 val)
{
- return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) :
- MIRROR_PORT(val);
+ return (id == ID_MT7531 || id == ID_MT7988) ?
+ MT7531_MIRROR_PORT_SET(val) :
+ MIRROR_PORT(val);
}
static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 055/158] s390/ism: Properly fix receive message buffer allocation
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 054/158] net: dsa: mt7530: fix port mirroring for MT7988 SoC switch Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 056/158] gpiolib: swnode: Remove wrong header inclusion Greg Kroah-Hartman
` (111 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Gerd Bayer, David S. Miller, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerd Bayer <gbayer@linux.ibm.com>
[ Upstream commit 83781384a96b95e2b6403d3c8a002b2c89031770 ]
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/net/ism_drv.c | 37 ++++++++++++++++++++++++++++---------
1 file changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c
index 81aabbfbbe2ca..622a61f8a3b84 100644
--- a/drivers/s390/net/ism_drv.c
+++ b/drivers/s390/net/ism_drv.c
@@ -291,13 +291,16 @@ static int ism_read_local_gid(struct ism_dev *ism)
static void ism_free_dmb(struct ism_dev *ism, struct ism_dmb *dmb)
{
clear_bit(dmb->sba_idx, ism->sba_bitmap);
- dma_free_coherent(&ism->pdev->dev, dmb->dmb_len,
- dmb->cpu_addr, dmb->dma_addr);
+ dma_unmap_page(&ism->pdev->dev, dmb->dma_addr, dmb->dmb_len,
+ DMA_FROM_DEVICE);
+ folio_put(virt_to_folio(dmb->cpu_addr));
}
static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb)
{
+ struct folio *folio;
unsigned long bit;
+ int rc;
if (PAGE_ALIGN(dmb->dmb_len) > dma_get_max_seg_size(&ism->pdev->dev))
return -EINVAL;
@@ -314,14 +317,30 @@ static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb)
test_and_set_bit(dmb->sba_idx, ism->sba_bitmap))
return -EINVAL;
- dmb->cpu_addr = dma_alloc_coherent(&ism->pdev->dev, dmb->dmb_len,
- &dmb->dma_addr,
- GFP_KERNEL | __GFP_NOWARN |
- __GFP_NOMEMALLOC | __GFP_NORETRY);
- if (!dmb->cpu_addr)
- clear_bit(dmb->sba_idx, ism->sba_bitmap);
+ folio = folio_alloc(GFP_KERNEL | __GFP_NOWARN | __GFP_NOMEMALLOC |
+ __GFP_NORETRY, get_order(dmb->dmb_len));
- return dmb->cpu_addr ? 0 : -ENOMEM;
+ if (!folio) {
+ rc = -ENOMEM;
+ goto out_bit;
+ }
+
+ dmb->cpu_addr = folio_address(folio);
+ dmb->dma_addr = dma_map_page(&ism->pdev->dev,
+ virt_to_page(dmb->cpu_addr), 0,
+ dmb->dmb_len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&ism->pdev->dev, dmb->dma_addr)) {
+ rc = -ENOMEM;
+ goto out_free;
+ }
+
+ return 0;
+
+out_free:
+ kfree(dmb->cpu_addr);
+out_bit:
+ clear_bit(dmb->sba_idx, ism->sba_bitmap);
+ return rc;
}
int ism_register_dmb(struct ism_dev *ism, struct ism_dmb *dmb,
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 056/158] gpiolib: swnode: Remove wrong header inclusion
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 055/158] s390/ism: Properly fix receive message buffer allocation Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 057/158] net: ethernet: mtk_eth_soc: fix WED + wifi reset Greg Kroah-Hartman
` (110 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Andy Shevchenko,
Bartosz Golaszewski, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit 69ffed4b62523bbc85511f150500329d28aba356 ]
The flags in the software node properties are supposed to be
the GPIO lookup flags, which are provided by gpio/machine.h,
as the software nodes are the kernel internal thing and doesn't
need to rely to any of ABIs.
Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/gpio/property.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/linux/gpio/property.h b/include/linux/gpio/property.h
index 6c75c8bd44a0b..1a14e239221f7 100644
--- a/include/linux/gpio/property.h
+++ b/include/linux/gpio/property.h
@@ -2,7 +2,6 @@
#ifndef __LINUX_GPIO_PROPERTY_H
#define __LINUX_GPIO_PROPERTY_H
-#include <dt-bindings/gpio/gpio.h> /* for GPIO_* flags */
#include <linux/property.h>
#define PROPERTY_ENTRY_GPIO(_name_, _chip_node_, _idx_, _flags_) \
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 057/158] net: ethernet: mtk_eth_soc: fix WED + wifi reset
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 056/158] gpiolib: swnode: Remove wrong header inclusion Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 058/158] net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them Greg Kroah-Hartman
` (109 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Felix Fietkau, Jakub Kicinski, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <nbd@nbd.name>
[ Upstream commit 94667949ec3bbb2218c46ad0a0e7274c8832e494 ]
The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.
Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mediatek/mtk_wed.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_wed.c b/drivers/net/ethernet/mediatek/mtk_wed.c
index 94376aa2b34c5..c7196055c8c98 100644
--- a/drivers/net/ethernet/mediatek/mtk_wed.c
+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
@@ -598,13 +598,13 @@ mtk_wed_dma_disable(struct mtk_wed_device *dev)
static void
mtk_wed_stop(struct mtk_wed_device *dev)
{
+ mtk_wed_dma_disable(dev);
mtk_wed_set_ext_int(dev, false);
wed_w32(dev, MTK_WED_WPDMA_INT_TRIGGER, 0);
wed_w32(dev, MTK_WED_WDMA_INT_TRIGGER, 0);
wdma_w32(dev, MTK_WDMA_INT_MASK, 0);
wdma_w32(dev, MTK_WDMA_INT_GRP2, 0);
- wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0);
if (dev->hw->version == 1)
return;
@@ -617,7 +617,6 @@ static void
mtk_wed_deinit(struct mtk_wed_device *dev)
{
mtk_wed_stop(dev);
- mtk_wed_dma_disable(dev);
wed_clr(dev, MTK_WED_CTRL,
MTK_WED_CTRL_WDMA_INT_AGENT_EN |
@@ -1703,9 +1702,6 @@ mtk_wed_irq_get(struct mtk_wed_device *dev, u32 mask)
static void
mtk_wed_irq_set_mask(struct mtk_wed_device *dev, u32 mask)
{
- if (!dev->running)
- return;
-
mtk_wed_set_ext_int(dev, !!mask);
wed_w32(dev, MTK_WED_INT_MASK, mask);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 058/158] net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 057/158] net: ethernet: mtk_eth_soc: fix WED + wifi reset Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 059/158] drm/i915/mst: Limit MST+DSC to TGL+ Greg Kroah-Hartman
` (108 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Schuyler Patton,
Siddharth Vadapalli, Roger Quadros, Jakub Kicinski, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli <s-vadapalli@ti.com>
[ Upstream commit c24cd679b075b0e953ea167b0aa2b2d59e4eba7f ]
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index c62b0f99f2bc4..d556e705ec000 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -2716,6 +2716,8 @@ static void am65_cpsw_unregister_devlink(struct am65_cpsw_common *common)
static int am65_cpsw_nuss_register_ndevs(struct am65_cpsw_common *common)
{
+ struct am65_cpsw_rx_chn *rx_chan = &common->rx_chns;
+ struct am65_cpsw_tx_chn *tx_chan = common->tx_chns;
struct device *dev = common->dev;
struct am65_cpsw_port *port;
int ret = 0, i;
@@ -2728,6 +2730,22 @@ static int am65_cpsw_nuss_register_ndevs(struct am65_cpsw_common *common)
if (ret)
return ret;
+ /* The DMA Channels are not guaranteed to be in a clean state.
+ * Reset and disable them to ensure that they are back to the
+ * clean state and ready to be used.
+ */
+ for (i = 0; i < common->tx_ch_num; i++) {
+ k3_udma_glue_reset_tx_chn(tx_chan[i].tx_chn, &tx_chan[i],
+ am65_cpsw_nuss_tx_cleanup);
+ k3_udma_glue_disable_tx_chn(tx_chan[i].tx_chn);
+ }
+
+ for (i = 0; i < AM65_CPSW_MAX_RX_FLOWS; i++)
+ k3_udma_glue_reset_rx_chn(rx_chan->rx_chn, i, rx_chan,
+ am65_cpsw_nuss_rx_cleanup, !!i);
+
+ k3_udma_glue_disable_rx_chn(rx_chan->rx_chn);
+
ret = am65_cpsw_nuss_register_devlink(common);
if (ret)
return ret;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 059/158] drm/i915/mst: Limit MST+DSC to TGL+
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 058/158] net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 060/158] RDMA/rxe: Fix the problem "mutex_destroy missing" Greg Kroah-Hartman
` (107 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Uma Shankar, Ville Syrjälä,
Rodrigo Vivi, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
[ Upstream commit 51bc63392e96ca45d7be98bc43c180b174ffca09 ]
The MST code currently assumes that glk+ already supports MST+DSC,
which is incorrect. We need to check for TGL+ actually. ICL does
support SST+DSC, but supposedly it can't do MST+FEC which will
also rule out MST+DSC.
Note that a straight TGL+ check doesn't work here because DSC
support can get fused out, so we do need to also check 'has_dsc'.
Cc: stable@vger.kernel.org
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com
(cherry picked from commit c9c92f286dbdf872390ef3e74dbe5f0641e46f55)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/i915/display/intel_display_device.h | 1 +
drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_device.h b/drivers/gpu/drm/i915/display/intel_display_device.h
index 215e682bd8b7a..5fd07c1817766 100644
--- a/drivers/gpu/drm/i915/display/intel_display_device.h
+++ b/drivers/gpu/drm/i915/display/intel_display_device.h
@@ -46,6 +46,7 @@ struct drm_printer;
#define HAS_DPT(i915) (DISPLAY_VER(i915) >= 13)
#define HAS_DSB(i915) (DISPLAY_INFO(i915)->has_dsb)
#define HAS_DSC(__i915) (DISPLAY_RUNTIME_INFO(__i915)->has_dsc)
+#define HAS_DSC_MST(__i915) (DISPLAY_VER(__i915) >= 12 && HAS_DSC(__i915))
#define HAS_FBC(i915) (DISPLAY_RUNTIME_INFO(i915)->fbc_mask != 0)
#define HAS_FPGA_DBG_UNCLAIMED(i915) (DISPLAY_INFO(i915)->has_fpga_dbg)
#define HAS_FW_BLC(i915) (DISPLAY_VER(i915) > 2)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index f104bd7f8c2a6..d2f8f20722d92 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -964,7 +964,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
return 0;
}
- if (DISPLAY_VER(dev_priv) >= 10 &&
+ if (HAS_DSC_MST(dev_priv) &&
drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
/*
* TBD pass the connector BPC,
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 060/158] RDMA/rxe: Fix the problem "mutex_destroy missing"
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 059/158] drm/i915/mst: Limit MST+DSC to TGL+ Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 061/158] RDMA/cm: Print the old state when cm_destroy_id gets timeout Greg Kroah-Hartman
` (106 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yanjun.Zhu, Daisuke Matsuda,
Leon Romanovsky, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yanjun.Zhu <yanjun.zhu@linux.dev>
[ Upstream commit 481047d7e8391d3842ae59025806531cdad710d9 ]
When a mutex lock is not used any more, the function mutex_destroy
should be called to mark the mutex lock uninitialized.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Yanjun.Zhu <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240314065140.27468-1-yanjun.zhu@linux.dev
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/sw/rxe/rxe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index 54c723a6eddac..6f9ec8db014c7 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -33,6 +33,8 @@ void rxe_dealloc(struct ib_device *ib_dev)
if (rxe->tfm)
crypto_free_shash(rxe->tfm);
+
+ mutex_destroy(&rxe->usdev_lock);
}
/* initialize rxe device parameters */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 061/158] RDMA/cm: Print the old state when cm_destroy_id gets timeout
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 060/158] RDMA/rxe: Fix the problem "mutex_destroy missing" Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 062/158] RDMA/mlx5: Fix port number for counter query in multi-port configuration Greg Kroah-Hartman
` (105 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mark Zhang, Leon Romanovsky, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Zhang <markzhang@nvidia.com>
[ Upstream commit b68e1acb5834ed1a2ad42d9d002815a8bae7c0b6 ]
The old state is helpful for debugging, as the current state is always
IB_CM_IDLE when timeout happens.
Fixes: 96d9cbe2f2ff ("RDMA/cm: add timeout to cm_destroy_id wait")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/20240322112049.2022994-1-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/core/cm.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index bf0df6ee4f785..07fb8d3c037f0 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1026,23 +1026,26 @@ static void cm_reset_to_idle(struct cm_id_private *cm_id_priv)
}
}
-static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id)
+static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id,
+ enum ib_cm_state old_state)
{
struct cm_id_private *cm_id_priv;
cm_id_priv = container_of(cm_id, struct cm_id_private, id);
- pr_err("%s: cm_id=%p timed out. state=%d refcnt=%d\n", __func__,
- cm_id, cm_id->state, refcount_read(&cm_id_priv->refcount));
+ pr_err("%s: cm_id=%p timed out. state %d -> %d, refcnt=%d\n", __func__,
+ cm_id, old_state, cm_id->state, refcount_read(&cm_id_priv->refcount));
}
static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
{
struct cm_id_private *cm_id_priv;
+ enum ib_cm_state old_state;
struct cm_work *work;
int ret;
cm_id_priv = container_of(cm_id, struct cm_id_private, id);
spin_lock_irq(&cm_id_priv->lock);
+ old_state = cm_id->state;
retest:
switch (cm_id->state) {
case IB_CM_LISTEN:
@@ -1151,7 +1154,7 @@ static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
msecs_to_jiffies(
CM_DESTROY_ID_WAIT_TIMEOUT));
if (!ret) /* timeout happened */
- cm_destroy_id_wait_timeout(cm_id);
+ cm_destroy_id_wait_timeout(cm_id, old_state);
} while (!ret);
while ((work = cm_dequeue_work(cm_id_priv)) != NULL)
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 062/158] RDMA/mlx5: Fix port number for counter query in multi-port configuration
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 061/158] RDMA/cm: Print the old state when cm_destroy_id gets timeout Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 063/158] perf lock contention: Add a missing NULL check Greg Kroah-Hartman
` (104 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Guralnik, Leon Romanovsky,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Guralnik <michaelgur@nvidia.com>
[ Upstream commit be121ffb384f53e966ee7299ffccc6eeb61bc73d ]
Set the correct port when querying PPCNT in multi-port configuration.
Distinguish between cases where switchdev mode was enabled to multi-port
configuration and don't overwrite the queried port to 1 in multi-port
case.
Fixes: 74b30b3ad5ce ("RDMA/mlx5: Set local port to one when accessing counters")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/9bfcc8ade958b760a51408c3ad654a01b11f7d76.1712134988.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/infiniband/hw/mlx5/mad.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
index 8102ef113b7e0..64dae68c43e62 100644
--- a/drivers/infiniband/hw/mlx5/mad.c
+++ b/drivers/infiniband/hw/mlx5/mad.c
@@ -188,7 +188,8 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u32 port_num,
mdev = dev->mdev;
mdev_port_num = 1;
}
- if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1) {
+ if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1 &&
+ !mlx5_core_mp_enabled(mdev)) {
/* set local port to one for Function-Per-Port HCA. */
mdev = dev->mdev;
mdev_port_num = 1;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 063/158] perf lock contention: Add a missing NULL check
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 062/158] RDMA/mlx5: Fix port number for counter query in multi-port configuration Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 064/158] s390/qdio: handle deferred cc1 Greg Kroah-Hartman
` (103 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ian Rogers,
Arnaldo Carvalho de Melo, Song Liu, bpf, Namhyung Kim,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Namhyung Kim <namhyung@kernel.org>
[ Upstream commit f3408580bac8ce5cd76e7391e529c0a22e7c7eb2 ]
I got a report for a failure in BPF verifier on a recent kernel with
perf lock contention command. It checks task->sighand->siglock without
checking if sighand is NULL or not. Let's add one.
; if (&curr->sighand->siglock == (void *)lock)
265: (79) r1 = *(u64 *)(r0 +2624) ; frame1: R0_w=trusted_ptr_task_struct(off=0,imm=0)
; R1_w=rcu_ptr_or_null_sighand_struct(off=0,imm=0)
266: (b7) r2 = 0 ; frame1: R2_w=0
267: (0f) r1 += r2
R1 pointer arithmetic on rcu_ptr_or_null_ prohibited, null-check it first
processed 164 insns (limit 1000000) max_states_per_insn 1 total_states 15 peak_states 15 mark_read 5
-- END PROG LOAD LOG --
libbpf: prog 'contention_end': failed to load: -13
libbpf: failed to load object 'lock_contention_bpf'
libbpf: failed to load BPF skeleton 'lock_contention_bpf': -13
Failed to load lock-contention BPF skeleton
lock contention BPF setup failed
lock contention did not detect any lock contention
Fixes: 1811e82767dcc ("perf lock contention: Track and show siglock with address")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240409225542.1870999-1-namhyung@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/util/bpf_skel/lock_contention.bpf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/bpf_skel/lock_contention.bpf.c b/tools/perf/util/bpf_skel/lock_contention.bpf.c
index 8d3cfbb3cc65b..473106c72c695 100644
--- a/tools/perf/util/bpf_skel/lock_contention.bpf.c
+++ b/tools/perf/util/bpf_skel/lock_contention.bpf.c
@@ -238,6 +238,7 @@ static inline __u32 check_lock_type(__u64 lock, __u32 flags)
struct task_struct *curr;
struct mm_struct___old *mm_old;
struct mm_struct___new *mm_new;
+ struct sighand_struct *sighand;
switch (flags) {
case LCB_F_READ: /* rwsem */
@@ -259,7 +260,9 @@ static inline __u32 check_lock_type(__u64 lock, __u32 flags)
break;
case LCB_F_SPIN: /* spinlock */
curr = bpf_get_current_task_btf();
- if (&curr->sighand->siglock == (void *)lock)
+ sighand = curr->sighand;
+
+ if (sighand && &sighand->siglock == (void *)lock)
return LCD_F_SIGHAND_LOCK;
break;
default:
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 064/158] s390/qdio: handle deferred cc1
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 063/158] perf lock contention: Add a missing NULL check Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 065/158] s390/cio: fix race condition during online processing Greg Kroah-Hartman
` (102 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexandra Winter,
Peter Oberparleiter, Alexander Gordeev, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Oberparleiter <oberpar@linux.ibm.com>
[ Upstream commit 607638faf2ff1cede37458111496e7cc6c977f6f ]
A deferred condition code 1 response indicates that I/O was not started
and should be retried. The current QDIO implementation handles a cc1
response as I/O error, resulting in a failed QDIO setup. This can happen
for example when a path verification request arrives at the same time
as QDIO setup I/O is started.
Fix this by retrying the QDIO setup I/O when a cc1 response is received.
Note that since
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")
deferred cc1 responses are much more likely to occur. See the commit
message of the latter for more background information.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/cio/qdio_main.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 9cde55730b65a..ebcb535809882 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -722,8 +722,8 @@ static void qdio_handle_activate_check(struct qdio_irq *irq_ptr,
lgr_info_log();
}
-static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat,
- int dstat)
+static int qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat,
+ int dstat, int dcc)
{
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
@@ -731,15 +731,18 @@ static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat,
goto error;
if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
goto error;
+ if (dcc == 1)
+ return -EAGAIN;
if (!(dstat & DEV_STAT_DEV_END))
goto error;
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
- return;
+ return 0;
error:
DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+ return -EIO;
}
/* qdio interrupt handler */
@@ -748,7 +751,7 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
struct subchannel_id schid;
- int cstat, dstat;
+ int cstat, dstat, rc, dcc;
if (!intparm || !irq_ptr) {
ccw_device_get_schid(cdev, &schid);
@@ -768,10 +771,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
qdio_irq_check_sense(irq_ptr, irb);
cstat = irb->scsw.cmd.cstat;
dstat = irb->scsw.cmd.dstat;
+ dcc = scsw_cmd_is_valid_cc(&irb->scsw) ? irb->scsw.cmd.cc : 0;
+ rc = 0;
switch (irq_ptr->state) {
case QDIO_IRQ_STATE_INACTIVE:
- qdio_establish_handle_irq(irq_ptr, cstat, dstat);
+ rc = qdio_establish_handle_irq(irq_ptr, cstat, dstat, dcc);
break;
case QDIO_IRQ_STATE_CLEANUP:
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
@@ -785,12 +790,25 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
if (cstat || dstat)
qdio_handle_activate_check(irq_ptr, intparm, cstat,
dstat);
+ else if (dcc == 1)
+ rc = -EAGAIN;
break;
case QDIO_IRQ_STATE_STOPPED:
break;
default:
WARN_ON_ONCE(1);
}
+
+ if (rc == -EAGAIN) {
+ DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qint retry");
+ rc = ccw_device_start(cdev, irq_ptr->ccw, intparm, 0, 0);
+ if (!rc)
+ return;
+ DBF_ERROR("%4x RETRY ERR", irq_ptr->schid.sch_no);
+ DBF_ERROR("rc:%4x", rc);
+ qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+ }
+
wake_up(&cdev->private->wait_q);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 065/158] s390/cio: fix race condition during online processing
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 064/158] s390/qdio: handle deferred cc1 Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 066/158] drm: nv04: Fix out of bounds access Greg Kroah-Hartman
` (101 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alexandra Winter, Vineeth Vijayan,
Peter Oberparleiter, Alexander Gordeev, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Oberparleiter <oberpar@linux.ibm.com>
[ Upstream commit 2d8527f2f911fab84aec04df4788c0c23af3df48 ]
A race condition exists in ccw_device_set_online() that can cause the
online process to fail, leaving the affected device in an inconsistent
state. As a result, subsequent attempts to set that device online fail
with return code ENODEV.
The problem occurs when a path verification request arrives after
a wait for final device state completed, but before the result state
is evaluated.
Fix this by ensuring that the CCW-device lock is held between
determining final state and checking result state.
Note that since:
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
path verification requests are much more likely to occur during boot,
resulting in an increased chance of this race condition occurring.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/cio/device.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 4ca5adce91079..57e0050dbaa53 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -363,10 +363,8 @@ int ccw_device_set_online(struct ccw_device *cdev)
spin_lock_irq(cdev->ccwlock);
ret = ccw_device_online(cdev);
- spin_unlock_irq(cdev->ccwlock);
- if (ret == 0)
- wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
- else {
+ if (ret) {
+ spin_unlock_irq(cdev->ccwlock);
CIO_MSG_EVENT(0, "ccw_device_online returned %d, "
"device 0.%x.%04x\n",
ret, cdev->private->dev_id.ssid,
@@ -375,7 +373,12 @@ int ccw_device_set_online(struct ccw_device *cdev)
put_device(&cdev->dev);
return ret;
}
- spin_lock_irq(cdev->ccwlock);
+ /* Wait until a final state is reached */
+ while (!dev_fsm_final_state(cdev)) {
+ spin_unlock_irq(cdev->ccwlock);
+ wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
+ spin_lock_irq(cdev->ccwlock);
+ }
/* Check if online processing was successful */
if ((cdev->private->state != DEV_STATE_ONLINE) &&
(cdev->private->state != DEV_STATE_W4SENSE)) {
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 066/158] drm: nv04: Fix out of bounds access
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 065/158] s390/cio: fix race condition during online processing Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 067/158] drm/panel: visionox-rm69299: dont unregister DSI device Greg Kroah-Hartman
` (100 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mikhail Kobuk, Danilo Krummrich,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikhail Kobuk <m.kobuk@ispras.ru>
[ Upstream commit cf92bb778eda7830e79452c6917efa8474a30c1e ]
When Output Resource (dcb->or) value is assigned in
fabricate_dcb_output(), there may be out of bounds access to
dac_users array in case dcb->or is zero because ffs(dcb->or) is
used as index there.
The 'or' argument of fabricate_dcb_output() must be interpreted as a
number of bit to set, not value.
Utilize macros from 'enum nouveau_or' in calls instead of hardcoding.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4")
Fixes: 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/nouveau/nouveau_bios.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 189903b65edc9..48cf593383b34 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -23,6 +23,7 @@
*/
#include "nouveau_drv.h"
+#include "nouveau_bios.h"
#include "nouveau_reg.h"
#include "dispnv04/hw.h"
#include "nouveau_encoder.h"
@@ -1675,7 +1676,7 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
*/
if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) {
if (*conn == 0xf2005014 && *conf == 0xffffffff) {
- fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, 1);
+ fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, DCB_OUTPUT_B);
return false;
}
}
@@ -1761,26 +1762,26 @@ fabricate_dcb_encoder_table(struct drm_device *dev, struct nvbios *bios)
#ifdef __powerpc__
/* Apple iMac G4 NV17 */
if (of_machine_is_compatible("PowerMac4,5")) {
- fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, 1);
- fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, 2);
+ fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, DCB_OUTPUT_B);
+ fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, DCB_OUTPUT_C);
return;
}
#endif
/* Make up some sane defaults */
fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG,
- bios->legacy.i2c_indices.crt, 1, 1);
+ bios->legacy.i2c_indices.crt, 1, DCB_OUTPUT_B);
if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
fabricate_dcb_output(dcb, DCB_OUTPUT_TV,
bios->legacy.i2c_indices.tv,
- all_heads, 0);
+ all_heads, DCB_OUTPUT_A);
else if (bios->tmds.output0_script_ptr ||
bios->tmds.output1_script_ptr)
fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS,
bios->legacy.i2c_indices.panel,
- all_heads, 1);
+ all_heads, DCB_OUTPUT_B);
}
static int
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 067/158] drm/panel: visionox-rm69299: dont unregister DSI device
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 066/158] drm: nv04: Fix out of bounds access Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 068/158] drm/radeon: make -fstrict-flex-arrays=3 happy Greg Kroah-Hartman
` (99 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Jessica Zhang, Dmitry Baryshkov,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[ Upstream commit 9e4d3f4f34455abbaa9930bf6b7575a5cd081496 ]
The DSI device for the panel was registered by the DSI host, so it is an
error to unregister it from the panel driver. Drop the call to
mipi_dsi_device_unregister().
Fixes: c7f66d32dd43 ("drm/panel: add support for rm69299 visionox panel")
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-1-9f56953c5fb9@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/panel/panel-visionox-rm69299.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
index c2806e4fd553b..6e946e5a036ee 100644
--- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -261,8 +261,6 @@ static void visionox_rm69299_remove(struct mipi_dsi_device *dsi)
struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
mipi_dsi_detach(ctx->dsi);
- mipi_dsi_device_unregister(ctx->dsi);
-
drm_panel_remove(&ctx->panel);
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 068/158] drm/radeon: make -fstrict-flex-arrays=3 happy
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 067/158] drm/panel: visionox-rm69299: dont unregister DSI device Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 069/158] ALSA: scarlett2: Move USB IDs out from device_info struct Greg Kroah-Hartman
` (98 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian König, Kees Cook,
Alex Deucher, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
[ Upstream commit 0ba753bc7e79e49556e81b0d09b2de1aa558553b ]
The driver parses a union where the layout up through the first
array is the same, however, the array has different sizes
depending on the elements in the union. Be explicit to
fix the UBSAN checker.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 85c4bb186203c..061396e7fa0f9 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -922,8 +922,12 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
max_device = ATOM_MAX_SUPPORTED_DEVICE_INFO;
for (i = 0; i < max_device; i++) {
- ATOM_CONNECTOR_INFO_I2C ci =
- supported_devices->info.asConnInfo[i];
+ ATOM_CONNECTOR_INFO_I2C ci;
+
+ if (frev > 1)
+ ci = supported_devices->info_2d1.asConnInfo[i];
+ else
+ ci = supported_devices->info.asConnInfo[i];
bios_connectors[i].valid = false;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 069/158] ALSA: scarlett2: Move USB IDs out from device_info struct
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 068/158] drm/radeon: make -fstrict-flex-arrays=3 happy Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 070/158] ALSA: scarlett2: Add support for Clarett 8Pre USB Greg Kroah-Hartman
` (97 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Philippe Perrot,
Geoffrey D. Bennett, Takashi Iwai, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit d98cc489029dba4d99714c2e8ec4f5ba249f6851 ]
By moving the USB IDs from the device_info struct into
scarlett2_devices[], that will allow for devices with different
USB IDs to share the same device_info.
Tested-by: Philippe Perrot <philippe@perrot-net.fr>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/8263368e8d49e6fcebc709817bd82ab79b404468.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: b9a98cdd3ac7 ("ALSA: scarlett2: Add support for Clarett 8Pre USB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_scarlett_gen2.c | 63 ++++++++++++---------------------
1 file changed, 23 insertions(+), 40 deletions(-)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index c04cff7225411..cfb7345ee7a8c 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -317,8 +317,6 @@ struct scarlett2_mux_entry {
};
struct scarlett2_device_info {
- u32 usb_id; /* USB device identifier */
-
/* Gen 3 devices have an internal MSD mode switch that needs
* to be disabled in order to access the full functionality of
* the device.
@@ -440,8 +438,6 @@ struct scarlett2_data {
/*** Model-specific data ***/
static const struct scarlett2_device_info s6i6_gen2_info = {
- .usb_id = USB_ID(0x1235, 0x8203),
-
.config_set = SCARLETT2_CONFIG_SET_GEN_2,
.level_input_count = 2,
.pad_input_count = 2,
@@ -486,8 +482,6 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
};
static const struct scarlett2_device_info s18i8_gen2_info = {
- .usb_id = USB_ID(0x1235, 0x8204),
-
.config_set = SCARLETT2_CONFIG_SET_GEN_2,
.level_input_count = 2,
.pad_input_count = 4,
@@ -535,8 +529,6 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
};
static const struct scarlett2_device_info s18i20_gen2_info = {
- .usb_id = USB_ID(0x1235, 0x8201),
-
.config_set = SCARLETT2_CONFIG_SET_GEN_2,
.line_out_hw_vol = 1,
@@ -589,8 +581,6 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
};
static const struct scarlett2_device_info solo_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8211),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_NO_MIXER,
.level_input_count = 1,
@@ -602,8 +592,6 @@ static const struct scarlett2_device_info solo_gen3_info = {
};
static const struct scarlett2_device_info s2i2_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8210),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_NO_MIXER,
.level_input_count = 2,
@@ -614,8 +602,6 @@ static const struct scarlett2_device_info s2i2_gen3_info = {
};
static const struct scarlett2_device_info s4i4_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8212),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.level_input_count = 2,
@@ -660,8 +646,6 @@ static const struct scarlett2_device_info s4i4_gen3_info = {
};
static const struct scarlett2_device_info s8i6_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8213),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.level_input_count = 2,
@@ -713,8 +697,6 @@ static const struct scarlett2_device_info s8i6_gen3_info = {
};
static const struct scarlett2_device_info s18i8_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8214),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.line_out_hw_vol = 1,
@@ -783,8 +765,6 @@ static const struct scarlett2_device_info s18i8_gen3_info = {
};
static const struct scarlett2_device_info s18i20_gen3_info = {
- .usb_id = USB_ID(0x1235, 0x8215),
-
.has_msd_mode = 1,
.config_set = SCARLETT2_CONFIG_SET_GEN_3,
.line_out_hw_vol = 1,
@@ -848,8 +828,6 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
};
static const struct scarlett2_device_info clarett_8pre_info = {
- .usb_id = USB_ID(0x1235, 0x820c),
-
.config_set = SCARLETT2_CONFIG_SET_CLARETT,
.line_out_hw_vol = 1,
.level_input_count = 2,
@@ -902,25 +880,30 @@ static const struct scarlett2_device_info clarett_8pre_info = {
} },
};
-static const struct scarlett2_device_info *scarlett2_devices[] = {
+struct scarlett2_device_entry {
+ const u32 usb_id; /* USB device identifier */
+ const struct scarlett2_device_info *info;
+};
+
+static const struct scarlett2_device_entry scarlett2_devices[] = {
/* Supported Gen 2 devices */
- &s6i6_gen2_info,
- &s18i8_gen2_info,
- &s18i20_gen2_info,
+ { USB_ID(0x1235, 0x8203), &s6i6_gen2_info },
+ { USB_ID(0x1235, 0x8204), &s18i8_gen2_info },
+ { USB_ID(0x1235, 0x8201), &s18i20_gen2_info },
/* Supported Gen 3 devices */
- &solo_gen3_info,
- &s2i2_gen3_info,
- &s4i4_gen3_info,
- &s8i6_gen3_info,
- &s18i8_gen3_info,
- &s18i20_gen3_info,
+ { USB_ID(0x1235, 0x8211), &solo_gen3_info },
+ { USB_ID(0x1235, 0x8210), &s2i2_gen3_info },
+ { USB_ID(0x1235, 0x8212), &s4i4_gen3_info },
+ { USB_ID(0x1235, 0x8213), &s8i6_gen3_info },
+ { USB_ID(0x1235, 0x8214), &s18i8_gen3_info },
+ { USB_ID(0x1235, 0x8215), &s18i20_gen3_info },
/* Supported Clarett+ devices */
- &clarett_8pre_info,
+ { USB_ID(0x1235, 0x820c), &clarett_8pre_info },
/* End of list */
- NULL
+ { 0, NULL },
};
/* get the starting port index number for a given port type/direction */
@@ -4149,17 +4132,17 @@ static int scarlett2_init_notify(struct usb_mixer_interface *mixer)
static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
{
- const struct scarlett2_device_info **info = scarlett2_devices;
+ const struct scarlett2_device_entry *entry = scarlett2_devices;
int err;
- /* Find device in scarlett2_devices */
- while (*info && (*info)->usb_id != mixer->chip->usb_id)
- info++;
- if (!*info)
+ /* Find entry in scarlett2_devices */
+ while (entry->usb_id && entry->usb_id != mixer->chip->usb_id)
+ entry++;
+ if (!entry->usb_id)
return -EINVAL;
/* Initialise private data */
- err = scarlett2_init_private(mixer, *info);
+ err = scarlett2_init_private(mixer, entry->info);
if (err < 0)
return err;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 070/158] ALSA: scarlett2: Add support for Clarett 8Pre USB
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 069/158] ALSA: scarlett2: Move USB IDs out from device_info struct Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 071/158] ASoC: ti: Convert Pandora ASoC to GPIO descriptors Greg Kroah-Hartman
` (96 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Philippe Perrot,
Geoffrey D. Bennett, Takashi Iwai, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit b9a98cdd3ac7b80d8ea0f6acd81c88ad3d8bcb4a ]
The Clarett 8Pre USB works the same as the Clarett+ 8Pre, only the USB
ID is different.
Tested-by: Philippe Perrot <philippe@perrot-net.fr>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e59f47b29e2037f031b56bde10474c6e96e31ba5.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_quirks.c | 1 +
sound/usb/mixer_scarlett_gen2.c | 11 ++++++++---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 1f32e3ae3aa31..b122d7aedb443 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3447,6 +3447,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x1235, 0x8213): /* Focusrite Scarlett 8i6 3rd Gen */
case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */
case USB_ID(0x1235, 0x8215): /* Focusrite Scarlett 18i20 3rd Gen */
+ case USB_ID(0x1235, 0x8208): /* Focusrite Clarett 8Pre USB */
case USB_ID(0x1235, 0x820c): /* Focusrite Clarett+ 8Pre */
err = snd_scarlett_gen2_init(mixer);
break;
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index cfb7345ee7a8c..bf3d916d5a13c 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -1,13 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Focusrite Scarlett Gen 2/3 and Clarett+ Driver for ALSA
+ * Focusrite Scarlett Gen 2/3 and Clarett USB/Clarett+ Driver for ALSA
*
* Supported models:
* - 6i6/18i8/18i20 Gen 2
* - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3
+ * - Clarett 8Pre USB
* - Clarett+ 8Pre
*
- * Copyright (c) 2018-2022 by Geoffrey D. Bennett <g at b4.vu>
+ * Copyright (c) 2018-2023 by Geoffrey D. Bennett <g at b4.vu>
* Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@gmail.com>
* Copyright (c) 2022 by Christian Colglazier <christian@cacolglazier.com>
*
@@ -56,6 +57,9 @@
* Support for Clarett+ 8Pre added in Aug 2022 by Christian
* Colglazier.
*
+ * Support for Clarett 8Pre USB added in Sep 2023 (thanks to Philippe
+ * Perrot for confirmation).
+ *
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
* - mixer-matrix gain stages
@@ -899,7 +903,8 @@ static const struct scarlett2_device_entry scarlett2_devices[] = {
{ USB_ID(0x1235, 0x8214), &s18i8_gen3_info },
{ USB_ID(0x1235, 0x8215), &s18i20_gen3_info },
- /* Supported Clarett+ devices */
+ /* Supported Clarett USB/Clarett+ devices */
+ { USB_ID(0x1235, 0x8208), &clarett_8pre_info },
{ USB_ID(0x1235, 0x820c), &clarett_8pre_info },
/* End of list */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 071/158] ASoC: ti: Convert Pandora ASoC to GPIO descriptors
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 070/158] ALSA: scarlett2: Add support for Clarett 8Pre USB Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 072/158] usb: pci-quirks: group AMD specific quirk code together Greg Kroah-Hartman
` (95 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Linus Walleij, Jarkko Nikula,
Mark Brown, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 319e6ac143b9e9048e527ab9dd2aabb8fdf3d60f ]
The Pandora uses GPIO descriptors pretty much exclusively, but not
for ASoC, so let's fix it. Register the pins in a descriptor table
in the machine since the ASoC device is not using device tree.
Use static locals for the GPIO descriptors because I'm not able
to experient with better state storage on any real hardware. Others
using the Pandora can come afterwards and improve this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-4-60cf4f8adbc5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/pdata-quirks.c | 10 +++++
sound/soc/ti/omap3pandora.c | 63 +++++++++++-------------------
2 files changed, 33 insertions(+), 40 deletions(-)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index c1c0121f478d6..b947bacf23a37 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -275,9 +275,19 @@ static struct platform_device pandora_backlight = {
.id = -1,
};
+static struct gpiod_lookup_table pandora_soc_audio_gpios = {
+ .dev_id = "soc-audio",
+ .table = {
+ GPIO_LOOKUP("gpio-112-127", 6, "dac", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-0-15", 14, "amp", GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
static void __init omap3_pandora_legacy_init(void)
{
platform_device_register(&pandora_backlight);
+ gpiod_add_lookup_table(&pandora_soc_audio_gpios);
}
#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/sound/soc/ti/omap3pandora.c b/sound/soc/ti/omap3pandora.c
index a287e9747c2a1..fa92ed97dfe3b 100644
--- a/sound/soc/ti/omap3pandora.c
+++ b/sound/soc/ti/omap3pandora.c
@@ -7,7 +7,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
@@ -21,12 +21,11 @@
#include "omap-mcbsp.h"
-#define OMAP3_PANDORA_DAC_POWER_GPIO 118
-#define OMAP3_PANDORA_AMP_POWER_GPIO 14
-
#define PREFIX "ASoC omap3pandora: "
static struct regulator *omap3pandora_dac_reg;
+static struct gpio_desc *dac_power_gpio;
+static struct gpio_desc *amp_power_gpio;
static int omap3pandora_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
@@ -78,9 +77,9 @@ static int omap3pandora_dac_event(struct snd_soc_dapm_widget *w,
return ret;
}
mdelay(1);
- gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 1);
+ gpiod_set_value(dac_power_gpio, 1);
} else {
- gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 0);
+ gpiod_set_value(dac_power_gpio, 0);
mdelay(1);
regulator_disable(omap3pandora_dac_reg);
}
@@ -92,9 +91,9 @@ static int omap3pandora_hp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
- gpio_set_value(OMAP3_PANDORA_AMP_POWER_GPIO, 1);
+ gpiod_set_value(amp_power_gpio, 1);
else
- gpio_set_value(OMAP3_PANDORA_AMP_POWER_GPIO, 0);
+ gpiod_set_value(amp_power_gpio, 0);
return 0;
}
@@ -229,35 +228,10 @@ static int __init omap3pandora_soc_init(void)
pr_info("OMAP3 Pandora SoC init\n");
- ret = gpio_request(OMAP3_PANDORA_DAC_POWER_GPIO, "dac_power");
- if (ret) {
- pr_err(PREFIX "Failed to get DAC power GPIO\n");
- return ret;
- }
-
- ret = gpio_direction_output(OMAP3_PANDORA_DAC_POWER_GPIO, 0);
- if (ret) {
- pr_err(PREFIX "Failed to set DAC power GPIO direction\n");
- goto fail0;
- }
-
- ret = gpio_request(OMAP3_PANDORA_AMP_POWER_GPIO, "amp_power");
- if (ret) {
- pr_err(PREFIX "Failed to get amp power GPIO\n");
- goto fail0;
- }
-
- ret = gpio_direction_output(OMAP3_PANDORA_AMP_POWER_GPIO, 0);
- if (ret) {
- pr_err(PREFIX "Failed to set amp power GPIO direction\n");
- goto fail1;
- }
-
omap3pandora_snd_device = platform_device_alloc("soc-audio", -1);
if (omap3pandora_snd_device == NULL) {
pr_err(PREFIX "Platform device allocation failed\n");
- ret = -ENOMEM;
- goto fail1;
+ return -ENOMEM;
}
platform_set_drvdata(omap3pandora_snd_device, &snd_soc_card_omap3pandora);
@@ -268,6 +242,20 @@ static int __init omap3pandora_soc_init(void)
goto fail2;
}
+ dac_power_gpio = devm_gpiod_get(&omap3pandora_snd_device->dev,
+ "dac", GPIOD_OUT_LOW);
+ if (IS_ERR(dac_power_gpio)) {
+ ret = PTR_ERR(dac_power_gpio);
+ goto fail3;
+ }
+
+ amp_power_gpio = devm_gpiod_get(&omap3pandora_snd_device->dev,
+ "amp", GPIOD_OUT_LOW);
+ if (IS_ERR(amp_power_gpio)) {
+ ret = PTR_ERR(amp_power_gpio);
+ goto fail3;
+ }
+
omap3pandora_dac_reg = regulator_get(&omap3pandora_snd_device->dev, "vcc");
if (IS_ERR(omap3pandora_dac_reg)) {
pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",
@@ -283,10 +271,7 @@ static int __init omap3pandora_soc_init(void)
platform_device_del(omap3pandora_snd_device);
fail2:
platform_device_put(omap3pandora_snd_device);
-fail1:
- gpio_free(OMAP3_PANDORA_AMP_POWER_GPIO);
-fail0:
- gpio_free(OMAP3_PANDORA_DAC_POWER_GPIO);
+
return ret;
}
module_init(omap3pandora_soc_init);
@@ -295,8 +280,6 @@ static void __exit omap3pandora_soc_exit(void)
{
regulator_put(omap3pandora_dac_reg);
platform_device_unregister(omap3pandora_snd_device);
- gpio_free(OMAP3_PANDORA_AMP_POWER_GPIO);
- gpio_free(OMAP3_PANDORA_DAC_POWER_GPIO);
}
module_exit(omap3pandora_soc_exit);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 072/158] usb: pci-quirks: group AMD specific quirk code together
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 071/158] ASoC: ti: Convert Pandora ASoC to GPIO descriptors Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk Greg Kroah-Hartman
` (94 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Niklas Schnelle, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Schnelle <schnelle@linux.ibm.com>
[ Upstream commit 7ca9f9ba8aa7380dee5dd8346b57bbaf198b075a ]
A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD
quirk and adding its compile time dependency on HAS_IOPORT. In order to
minimize the number of #ifdefs in C files and make that patch easier
to read first group the code together. This is pure code movement
no functional change is intended.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-2-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/pci-quirks.c | 119 +++++++++++++++++-----------------
drivers/usb/host/pci-quirks.h | 14 ++--
2 files changed, 68 insertions(+), 65 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9addf..5e06fad82a228 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,22 @@
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -93,21 +109,6 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
-#define USB_INTEL_XUSB2PR 0xD0
-#define USB_INTEL_USB2PRM 0xD4
-#define USB_INTEL_USB3_PSSEN 0xD8
-#define USB_INTEL_USB3PRM 0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG 0xF8
-#define ASMT_DATA_WRITE1_REG 0xFC
-#define ASMT_CONTROL_REG 0xE0
-#define ASMT_CONTROL_WRITE_BIT 0x02
-#define ASMT_WRITEREG_CMD 0x10423
-#define ASMT_FLOWCTL_ADDR 0xFA30
-#define ASMT_FLOWCTL_DATA 0xBA
-#define ASMT_PSEUDO_DATA 0
-
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -458,50 +459,6 @@ void usb_amd_quirk_pll_disable(void)
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
- unsigned long retry_count;
- unsigned char value;
-
- for (retry_count = 1000; retry_count > 0; --retry_count) {
-
- pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
- if (value == 0xff) {
- dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
- return -EIO;
- }
-
- if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
- return 0;
-
- udelay(50);
- }
-
- dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
- return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send command and address to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send data to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
@@ -631,6 +588,50 @@ bool usb_amd_pt_check_port(struct device *device, int port)
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7a..cde2263a9d2e4 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -3,8 +3,6 @@
#define __LINUX_USB_PCI_QUIRKS_H
#ifdef CONFIG_USB_PCI
-void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
@@ -12,23 +10,27 @@ void usb_amd_dev_put(void);
bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
+void sb800_prefetch(struct device *dev, int on);
+bool usb_amd_pt_check_port(struct device *device, int port);
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
-void sb800_prefetch(struct device *dev, int on);
-bool usb_amd_pt_check_port(struct device *device, int port);
#else
struct pci_dev;
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 072/158] usb: pci-quirks: group AMD specific quirk code together Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-24 6:27 ` Arnd Bergmann
2024-04-23 21:38 ` [PATCH 6.6 074/158] usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff Greg Kroah-Hartman
` (93 subsequent siblings)
166 siblings, 1 reply; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Niklas Schnelle, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Schnelle <schnelle@linux.ibm.com>
[ Upstream commit 52e24f8c0a102ac76649c6b71224fadcc82bd5da ]
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. In the pci-quirks case the I/O port acceses are
used in the quirks for several AMD south bridges, Add a config option
for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/Kconfig | 10 ++++++++++
drivers/usb/core/hcd-pci.c | 3 +--
drivers/usb/host/pci-quirks.c | 2 ++
drivers/usb/host/pci-quirks.h | 30 ++++++++++++++++++++++--------
include/linux/usb/hcd.h | 17 +++++++++++++++++
5 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7f33bcc315f27..abf8c6cdea9ea 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -91,6 +91,16 @@ config USB_PCI
If you have such a device you may say N here and PCI related code
will not be built in the USB driver.
+config USB_PCI_AMD
+ bool "AMD PCI USB host support"
+ depends on USB_PCI && HAS_IOPORT
+ default X86 || MACH_LOONGSON64 || PPC_PASEMI
+ help
+ Enable workarounds for USB implementation quirks in SB600/SB700/SB800
+ and later south bridge implementations. These are common on x86 PCs
+ with AMD CPUs but rarely used elsewhere, with the exception of a few
+ powerpc and mips desktop machines.
+
if USB
source "drivers/usb/core/Kconfig"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 990280688b254..ee3156f495338 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
goto free_irq_vectors;
}
- hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
- driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+ hcd->amd_resume_bug = usb_hcd_amd_resume_bug(dev, driver);
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 5e06fad82a228..10813096d00c6 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -76,6 +76,7 @@
#define USB_INTEL_USB3_PSSEN 0xD8
#define USB_INTEL_USB3PRM 0xDC
+#ifdef CONFIG_USB_PCI_AMD
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -587,6 +588,7 @@ bool usb_amd_pt_check_port(struct device *device, int port)
return !(value & BIT(port_shift));
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif /* CONFIG_USB_PCI_AMD */
static int usb_asmedia_wait_write(struct pci_dev *pdev)
{
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index cde2263a9d2e4..a5230b0b9e913 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,7 +2,7 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_USB_PCI
+#ifdef CONFIG_USB_PCI_AMD
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
@@ -12,23 +12,37 @@ void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
void sb800_prefetch(struct device *dev, int on);
bool usb_amd_pt_check_port(struct device *device, int port);
-
-void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
#else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+ return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+ return false;
+}
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
static inline void usb_amd_dev_put(void) {}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+ return false;
+}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+#endif /* CONFIG_USB_PCI_AMD */
+#ifdef CONFIG_USB_PCI
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+struct pci_dev;
static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 61d4f0b793dcd..00724b4f6e122 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -484,8 +484,25 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev,
extern void usb_hcd_pci_remove(struct pci_dev *dev);
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+#ifdef CONFIG_USB_PCI_AMD
extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
+static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
+ const struct hc_driver *driver)
+{
+ if (!usb_hcd_amd_remote_wakeup_quirk(dev))
+ return false;
+ if (driver->flags & (HCD_USB11 | HCD_USB3))
+ return true;
+ return false;
+}
+#else /* CONFIG_USB_PCI_AMD */
+static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
+ const struct hc_driver *driver)
+{
+ return false;
+}
+#endif
extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
#endif /* CONFIG_USB_PCI */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 074/158] usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 075/158] thunderbolt: Introduce tb_port_reset() Greg Kroah-Hartman
` (92 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arnd Bergmann, Niklas Schnelle, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Schnelle <schnelle@linux.ibm.com>
[ Upstream commit 358ad297e379ff548247e3e24c6619559942bfdd ]
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. With the AMD quirk handled USB PCI quirks still use
inw() in uhci_check_and_reset_hc() and thus indirectly in
quirk_usb_handoff_uhci(). Handle this by conditionally compiling
uhci_check_and_reset_hc() and stubbing out quirk_usb_handoff_uhci() when
HAS_IOPORT is not available.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230911125653.1393895-4-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/pci-quirks.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 10813096d00c6..1f9c1b1435d86 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -634,6 +634,16 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
}
EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+{
+ u16 cmd;
+
+ return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
+}
+
+#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
+
+#if defined(CONFIG_HAS_IOPORT) && IS_ENABLED(CONFIG_USB_UHCI_HCD)
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -715,14 +725,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
-static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
-{
- u16 cmd;
- return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
-}
-
#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
-#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
@@ -742,6 +745,12 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
uhci_check_and_reset_hc(pdev, base);
}
+#else /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
+
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev) {}
+
+#endif /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
+
static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
{
return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 075/158] thunderbolt: Introduce tb_port_reset()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 074/158] usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 076/158] thunderbolt: Introduce tb_path_deactivate_hop() Greg Kroah-Hartman
` (91 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sanath S, Mika Westerberg,
Mario Limonciello
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sanath S <Sanath.S@amd.com>
commit 01da6b99d49f60b1edead44e33569b1a2e9f49b7 upstream.
Introduce a function that issues Downstream Port Reset to a USB4 port.
This supports Thunderbolt 2, 3 and USB4 routers.
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/lc.c | 45 ++++++++++++++++++++++++++++++++++++++++++
drivers/thunderbolt/switch.c | 7 ++++++
drivers/thunderbolt/tb.h | 2 +
drivers/thunderbolt/tb_regs.h | 4 +++
drivers/thunderbolt/usb4.c | 39 ++++++++++++++++++++++++++++++++++++
5 files changed, 97 insertions(+)
--- a/drivers/thunderbolt/lc.c
+++ b/drivers/thunderbolt/lc.c
@@ -6,6 +6,8 @@
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
*/
+#include <linux/delay.h>
+
#include "tb.h"
/**
@@ -45,6 +47,49 @@ static int find_port_lc_cap(struct tb_po
return sw->cap_lc + start + phys * size;
}
+/**
+ * tb_lc_reset_port() - Trigger downstream port reset through LC
+ * @port: Port that is reset
+ *
+ * Triggers downstream port reset through link controller registers.
+ * Returns %0 in case of success negative errno otherwise. Only supports
+ * non-USB4 routers with link controller (that's Thunderbolt 2 and
+ * Thunderbolt 3).
+ */
+int tb_lc_reset_port(struct tb_port *port)
+{
+ struct tb_switch *sw = port->sw;
+ int cap, ret;
+ u32 mode;
+
+ if (sw->generation < 2)
+ return -EINVAL;
+
+ cap = find_port_lc_cap(port);
+ if (cap < 0)
+ return cap;
+
+ ret = tb_sw_read(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1);
+ if (ret)
+ return ret;
+
+ mode |= TB_LC_PORT_MODE_DPR;
+
+ ret = tb_sw_write(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1);
+ if (ret)
+ return ret;
+
+ fsleep(10000);
+
+ ret = tb_sw_read(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1);
+ if (ret)
+ return ret;
+
+ mode &= ~TB_LC_PORT_MODE_DPR;
+
+ return tb_sw_write(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1);
+}
+
static int tb_lc_set_port_configured(struct tb_port *port, bool configured)
{
bool upstream = tb_is_upstream_port(port);
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -675,6 +675,13 @@ int tb_port_disable(struct tb_port *port
return __tb_port_enable(port, false);
}
+static int tb_port_reset(struct tb_port *port)
+{
+ if (tb_switch_is_usb4(port->sw))
+ return port->cap_usb4 ? usb4_port_reset(port) : 0;
+ return tb_lc_reset_port(port);
+}
+
/*
* tb_init_port() - initialize a port
*
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -1119,6 +1119,7 @@ int tb_drom_read(struct tb_switch *sw);
int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid);
int tb_lc_read_uuid(struct tb_switch *sw, u32 *uuid);
+int tb_lc_reset_port(struct tb_port *port);
int tb_lc_configure_port(struct tb_port *port);
void tb_lc_unconfigure_port(struct tb_port *port);
int tb_lc_configure_xdomain(struct tb_port *port);
@@ -1251,6 +1252,7 @@ void usb4_switch_remove_ports(struct tb_
int usb4_port_unlock(struct tb_port *port);
int usb4_port_hotplug_enable(struct tb_port *port);
+int usb4_port_reset(struct tb_port *port);
int usb4_port_configure(struct tb_port *port);
void usb4_port_unconfigure(struct tb_port *port);
int usb4_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd);
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -383,6 +383,7 @@ struct tb_regs_port_header {
#define PORT_CS_18_WODS BIT(17)
#define PORT_CS_18_WOU4S BIT(18)
#define PORT_CS_19 0x13
+#define PORT_CS_19_DPR BIT(0)
#define PORT_CS_19_PC BIT(3)
#define PORT_CS_19_PID BIT(4)
#define PORT_CS_19_WOC BIT(16)
@@ -579,6 +580,9 @@ struct tb_regs_hop {
#define TB_LC_POWER 0x740
/* Link controller registers */
+#define TB_LC_PORT_MODE 0x26
+#define TB_LC_PORT_MODE_DPR BIT(0)
+
#define TB_LC_CS_42 0x2a
#define TB_LC_CS_42_USB_PLUGGED BIT(31)
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1113,6 +1113,45 @@ int usb4_port_hotplug_enable(struct tb_p
return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
}
+/**
+ * usb4_port_reset() - Issue downstream port reset
+ * @port: USB4 port to reset
+ *
+ * Issues downstream port reset to @port.
+ */
+int usb4_port_reset(struct tb_port *port)
+{
+ int ret;
+ u32 val;
+
+ if (!port->cap_usb4)
+ return -EINVAL;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
+
+ val |= PORT_CS_19_DPR;
+
+ ret = tb_port_write(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
+
+ fsleep(10000);
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
+
+ val &= ~PORT_CS_19_DPR;
+
+ return tb_port_write(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+}
+
static int usb4_port_set_configured(struct tb_port *port, bool configured)
{
int ret;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 076/158] thunderbolt: Introduce tb_path_deactivate_hop()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 075/158] thunderbolt: Introduce tb_port_reset() Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 077/158] thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers Greg Kroah-Hartman
` (90 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sanath S, Mika Westerberg,
Mario Limonciello
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sanath S <Sanath.S@amd.com>
commit b35c1d7b11da8c08b14147bbe87c2c92f7a83f8b upstream.
This function can be used to clear path config space of an adapter. Make
it available for other files in this driver.
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/path.c | 13 +++++++++++++
drivers/thunderbolt/tb.h | 1 +
2 files changed, 14 insertions(+)
--- a/drivers/thunderbolt/path.c
+++ b/drivers/thunderbolt/path.c
@@ -446,6 +446,19 @@ static int __tb_path_deactivate_hop(stru
return -ETIMEDOUT;
}
+/**
+ * tb_path_deactivate_hop() - Deactivate one path in path config space
+ * @port: Lane or protocol adapter
+ * @hop_index: HopID of the path to be cleared
+ *
+ * This deactivates or clears a single path config space entry at
+ * @hop_index. Returns %0 in success and negative errno otherwise.
+ */
+int tb_path_deactivate_hop(struct tb_port *port, int hop_index)
+{
+ return __tb_path_deactivate_hop(port, hop_index, true);
+}
+
static void __tb_path_deactivate_hops(struct tb_path *path, int first_hop)
{
int i, res;
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -1100,6 +1100,7 @@ struct tb_path *tb_path_alloc(struct tb
void tb_path_free(struct tb_path *path);
int tb_path_activate(struct tb_path *path);
void tb_path_deactivate(struct tb_path *path);
+int tb_path_deactivate_hop(struct tb_port *port, int hop_index);
bool tb_path_is_invalid(struct tb_path *path);
bool tb_path_port_on_path(const struct tb_path *path,
const struct tb_port *port);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 077/158] thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 076/158] thunderbolt: Introduce tb_path_deactivate_hop() Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 078/158] thunderbolt: Reset topology created by the boot firmware Greg Kroah-Hartman
` (89 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sanath S, Mika Westerberg,
Mario Limonciello
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sanath S <Sanath.S@amd.com>
commit ec8162b3f0683ae08a21f20517cf49272b07ee0b upstream.
Currently tb_switch_reset() only did something for Thunderbolt 1
devices. Expand this to support all generations, including USB4, and
both host and device routers.
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/switch.c | 123 +++++++++++++++++++++++++++++++++++++-----
drivers/thunderbolt/tb_regs.h | 2
2 files changed, 111 insertions(+), 14 deletions(-)
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -1492,29 +1492,124 @@ static void tb_dump_switch(const struct
regs->__unknown1, regs->__unknown4);
}
+static int tb_switch_reset_host(struct tb_switch *sw)
+{
+ if (sw->generation > 1) {
+ struct tb_port *port;
+
+ tb_switch_for_each_port(sw, port) {
+ int i, ret;
+
+ /*
+ * For lane adapters we issue downstream port
+ * reset and clear up path config spaces.
+ *
+ * For protocol adapters we disable the path and
+ * clear path config space one by one (from 8 to
+ * Max Input HopID of the adapter).
+ */
+ if (tb_port_is_null(port) && !tb_is_upstream_port(port)) {
+ ret = tb_port_reset(port);
+ if (ret)
+ return ret;
+ } else if (tb_port_is_usb3_down(port) ||
+ tb_port_is_usb3_up(port)) {
+ tb_usb3_port_enable(port, false);
+ } else if (tb_port_is_dpin(port) ||
+ tb_port_is_dpout(port)) {
+ tb_dp_port_enable(port, false);
+ } else if (tb_port_is_pcie_down(port) ||
+ tb_port_is_pcie_up(port)) {
+ tb_pci_port_enable(port, false);
+ } else {
+ continue;
+ }
+
+ /* Cleanup path config space of protocol adapter */
+ for (i = TB_PATH_MIN_HOPID;
+ i <= port->config.max_in_hop_id; i++) {
+ ret = tb_path_deactivate_hop(port, i);
+ if (ret)
+ return ret;
+ }
+ }
+ } else {
+ struct tb_cfg_result res;
+
+ /* Thunderbolt 1 uses the "reset" config space packet */
+ res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2,
+ TB_CFG_SWITCH, 2, 2);
+ if (res.err)
+ return res.err;
+ res = tb_cfg_reset(sw->tb->ctl, tb_route(sw));
+ if (res.err > 0)
+ return -EIO;
+ else if (res.err < 0)
+ return res.err;
+ }
+
+ return 0;
+}
+
+static int tb_switch_reset_device(struct tb_switch *sw)
+{
+ return tb_port_reset(tb_switch_downstream_port(sw));
+}
+
+static bool tb_switch_enumerated(struct tb_switch *sw)
+{
+ u32 val;
+ int ret;
+
+ /*
+ * Read directly from the hardware because we use this also
+ * during system sleep where sw->config.enabled is already set
+ * by us.
+ */
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_3, 1);
+ if (ret)
+ return false;
+
+ return !!(val & ROUTER_CS_3_V);
+}
+
/**
- * tb_switch_reset() - reconfigure route, enable and send TB_CFG_PKG_RESET
- * @sw: Switch to reset
+ * tb_switch_reset() - Perform reset to the router
+ * @sw: Router to reset
+ *
+ * Issues reset to the router @sw. Can be used for any router. For host
+ * routers, resets all the downstream ports and cleans up path config
+ * spaces accordingly. For device routers issues downstream port reset
+ * through the parent router, so as side effect there will be unplug
+ * soon after this is finished.
+ *
+ * If the router is not enumerated does nothing.
*
- * Return: Returns 0 on success or an error code on failure.
+ * Returns %0 on success or negative errno in case of failure.
*/
int tb_switch_reset(struct tb_switch *sw)
{
- struct tb_cfg_result res;
+ int ret;
- if (sw->generation > 1)
+ /*
+ * We cannot access the port config spaces unless the router is
+ * already enumerated. If the router is not enumerated it is
+ * equal to being reset so we can skip that here.
+ */
+ if (!tb_switch_enumerated(sw))
return 0;
- tb_sw_dbg(sw, "resetting switch\n");
+ tb_sw_dbg(sw, "resetting\n");
+
+ if (tb_route(sw))
+ ret = tb_switch_reset_device(sw);
+ else
+ ret = tb_switch_reset_host(sw);
+
+ if (ret)
+ tb_sw_warn(sw, "failed to reset\n");
- res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2,
- TB_CFG_SWITCH, 2, 2);
- if (res.err)
- return res.err;
- res = tb_cfg_reset(sw->tb->ctl, tb_route(sw));
- if (res.err > 0)
- return -EIO;
- return res.err;
+ return ret;
}
/**
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -194,6 +194,8 @@ struct tb_regs_switch_header {
#define USB4_VERSION_MAJOR_MASK GENMASK(7, 5)
#define ROUTER_CS_1 0x01
+#define ROUTER_CS_3 0x03
+#define ROUTER_CS_3_V BIT(31)
#define ROUTER_CS_4 0x04
/* Used with the router cmuv field */
#define ROUTER_CS_4_CMUV_V1 0x10
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 078/158] thunderbolt: Reset topology created by the boot firmware
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 077/158] thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 079/158] ALSA: scarlett2: Default mixer driver to enabled Greg Kroah-Hartman
` (88 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mario Limonciello, Sanath S,
Mika Westerberg
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sanath S <Sanath.S@amd.com>
commit 59a54c5f3dbde00b8ad30aef27fe35b1fe07bf5c upstream.
Boot firmware (typically BIOS) might have created tunnels of its own.
The tunnel configuration that it does might be sub-optimal. For instance
it may only support HBR2 monitors so the DisplayPort tunnels it created
may limit Linux graphics drivers. In addition there is an issue on some
AMD based systems where the BIOS does not allocate enough PCIe resources
for future topology extension. By resetting the USB4 topology the PCIe
links will be reset as well allowing Linux to re-allocate.
This aligns the behavior with Windows Connection Manager.
We already issued host router reset for USB4 v2 routers, now extend it
to USB4 v1 routers as well. For pre-USB4 (that's Apple systems) we leave
it as is and continue to discover the existing tunnels.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/domain.c | 5 +++--
drivers/thunderbolt/icm.c | 2 +-
drivers/thunderbolt/nhi.c | 19 +++++++++++++------
drivers/thunderbolt/tb.c | 26 +++++++++++++++++++-------
drivers/thunderbolt/tb.h | 4 ++--
5 files changed, 38 insertions(+), 18 deletions(-)
--- a/drivers/thunderbolt/domain.c
+++ b/drivers/thunderbolt/domain.c
@@ -423,6 +423,7 @@ err_free:
/**
* tb_domain_add() - Add domain to the system
* @tb: Domain to add
+ * @reset: Issue reset to the host router
*
* Starts the domain and adds it to the system. Hotplugging devices will
* work after this has been returned successfully. In order to remove
@@ -431,7 +432,7 @@ err_free:
*
* Return: %0 in case of success and negative errno in case of error
*/
-int tb_domain_add(struct tb *tb)
+int tb_domain_add(struct tb *tb, bool reset)
{
int ret;
@@ -460,7 +461,7 @@ int tb_domain_add(struct tb *tb)
/* Start the domain */
if (tb->cm_ops->start) {
- ret = tb->cm_ops->start(tb);
+ ret = tb->cm_ops->start(tb, reset);
if (ret)
goto err_domain_del;
}
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -2144,7 +2144,7 @@ static int icm_runtime_resume(struct tb
return 0;
}
-static int icm_start(struct tb *tb)
+static int icm_start(struct tb *tb, bool not_used)
{
struct icm *icm = tb_priv(tb);
int ret;
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -1221,7 +1221,7 @@ static void nhi_check_iommu(struct tb_nh
str_enabled_disabled(port_ok));
}
-static void nhi_reset(struct tb_nhi *nhi)
+static bool nhi_reset(struct tb_nhi *nhi)
{
ktime_t timeout;
u32 val;
@@ -1229,11 +1229,11 @@ static void nhi_reset(struct tb_nhi *nhi
val = ioread32(nhi->iobase + REG_CAPS);
/* Reset only v2 and later routers */
if (FIELD_GET(REG_CAPS_VERSION_MASK, val) < REG_CAPS_VERSION_2)
- return;
+ return false;
if (!host_reset) {
dev_dbg(&nhi->pdev->dev, "skipping host router reset\n");
- return;
+ return false;
}
iowrite32(REG_RESET_HRR, nhi->iobase + REG_RESET);
@@ -1244,12 +1244,14 @@ static void nhi_reset(struct tb_nhi *nhi
val = ioread32(nhi->iobase + REG_RESET);
if (!(val & REG_RESET_HRR)) {
dev_warn(&nhi->pdev->dev, "host router reset successful\n");
- return;
+ return true;
}
usleep_range(10, 20);
} while (ktime_before(ktime_get(), timeout));
dev_warn(&nhi->pdev->dev, "timeout resetting host router\n");
+
+ return false;
}
static int nhi_init_msi(struct tb_nhi *nhi)
@@ -1331,6 +1333,7 @@ static int nhi_probe(struct pci_dev *pde
struct device *dev = &pdev->dev;
struct tb_nhi *nhi;
struct tb *tb;
+ bool reset;
int res;
if (!nhi_imr_valid(pdev))
@@ -1365,7 +1368,11 @@ static int nhi_probe(struct pci_dev *pde
nhi_check_quirks(nhi);
nhi_check_iommu(nhi);
- nhi_reset(nhi);
+ /*
+ * Only USB4 v2 hosts support host reset so if we already did
+ * that then don't do it again when the domain is initialized.
+ */
+ reset = nhi_reset(nhi) ? false : host_reset;
res = nhi_init_msi(nhi);
if (res)
@@ -1392,7 +1399,7 @@ static int nhi_probe(struct pci_dev *pde
dev_dbg(dev, "NHI initialized, starting thunderbolt\n");
- res = tb_domain_add(tb);
+ res = tb_domain_add(tb, reset);
if (res) {
/*
* At this point the RX/TX rings might already have been
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -2131,7 +2131,7 @@ static int tb_scan_finalize_switch(struc
return 0;
}
-static int tb_start(struct tb *tb)
+static int tb_start(struct tb *tb, bool reset)
{
struct tb_cm *tcm = tb_priv(tb);
int ret;
@@ -2172,12 +2172,24 @@ static int tb_start(struct tb *tb)
tb_switch_tmu_configure(tb->root_switch, TB_SWITCH_TMU_MODE_LOWRES);
/* Enable TMU if it is off */
tb_switch_tmu_enable(tb->root_switch);
- /* Full scan to discover devices added before the driver was loaded. */
- tb_scan_switch(tb->root_switch);
- /* Find out tunnels created by the boot firmware */
- tb_discover_tunnels(tb);
- /* Add DP resources from the DP tunnels created by the boot firmware */
- tb_discover_dp_resources(tb);
+
+ /*
+ * Boot firmware might have created tunnels of its own. Since we
+ * cannot be sure they are usable for us, tear them down and
+ * reset the ports to handle it as new hotplug for USB4 v1
+ * routers (for USB4 v2 and beyond we already do host reset).
+ */
+ if (reset && usb4_switch_version(tb->root_switch) == 1) {
+ tb_switch_reset(tb->root_switch);
+ } else {
+ /* Full scan to discover devices added before the driver was loaded. */
+ tb_scan_switch(tb->root_switch);
+ /* Find out tunnels created by the boot firmware */
+ tb_discover_tunnels(tb);
+ /* Add DP resources from the DP tunnels created by the boot firmware */
+ tb_discover_dp_resources(tb);
+ }
+
/*
* If the boot firmware did not create USB 3.x tunnels create them
* now for the whole topology.
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -488,7 +488,7 @@ struct tb_path {
*/
struct tb_cm_ops {
int (*driver_ready)(struct tb *tb);
- int (*start)(struct tb *tb);
+ int (*start)(struct tb *tb, bool reset);
void (*stop)(struct tb *tb);
int (*suspend_noirq)(struct tb *tb);
int (*resume_noirq)(struct tb *tb);
@@ -735,7 +735,7 @@ int tb_xdomain_init(void);
void tb_xdomain_exit(void);
struct tb *tb_domain_alloc(struct tb_nhi *nhi, int timeout_msec, size_t privsize);
-int tb_domain_add(struct tb *tb);
+int tb_domain_add(struct tb *tb, bool reset);
void tb_domain_remove(struct tb *tb);
int tb_domain_suspend_noirq(struct tb *tb);
int tb_domain_resume_noirq(struct tb *tb);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 079/158] ALSA: scarlett2: Default mixer driver to enabled
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 078/158] thunderbolt: Reset topology created by the boot firmware Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 080/158] ALSA: scarlett2: Add correct product series name to messages Greg Kroah-Hartman
` (87 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geoffrey D. Bennett, Takashi Iwai,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit bc83058f598757a908b30f8f536338cb1478ab5b ]
Early versions of this mixer driver did not work on all hardware, so
out of caution the driver was disabled by default and had to be
explicitly enabled with device_setup=1.
Since commit 764fa6e686e0 ("ALSA: usb-audio: scarlett2: Fix device
hang with ehci-pci") no more problems of this nature have been
reported. Therefore, enable the driver by default but provide a new
device_setup option to disable the driver in case that is needed.
- device_setup value of 0 now means "enable" rather than "disable".
- device_setup value of 1 is now ignored.
- device_setup value of 4 now means "disable".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/89600a35b40307f2766578ad1ca2f21801286b58.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: b61a3acada00 ("ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_scarlett_gen2.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index bf3d916d5a13c..c53ce9b81a7bb 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -145,12 +145,12 @@
#include "mixer_scarlett_gen2.h"
-/* device_setup value to enable */
-#define SCARLETT2_ENABLE 0x01
-
/* device_setup value to allow turning MSD mode back on */
#define SCARLETT2_MSD_ENABLE 0x02
+/* device_setup value to disable this mixer driver */
+#define SCARLETT2_DISABLE 0x04
+
/* some gui mixers can't handle negative ctl values */
#define SCARLETT2_VOLUME_BIAS 127
@@ -4237,19 +4237,20 @@ int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer)
if (!mixer->protocol)
return 0;
- if (!(chip->setup & SCARLETT2_ENABLE)) {
+ if (chip->setup & SCARLETT2_DISABLE) {
usb_audio_info(chip,
- "Focusrite Scarlett Gen 2/3 Mixer Driver disabled; "
- "use options snd_usb_audio vid=0x%04x pid=0x%04x "
- "device_setup=1 to enable and report any issues "
- "to g@b4.vu",
+ "Focusrite Scarlett Gen 2/3 Mixer Driver disabled "
+ "by modprobe options (snd_usb_audio "
+ "vid=0x%04x pid=0x%04x device_setup=%d)\n",
USB_ID_VENDOR(chip->usb_id),
- USB_ID_PRODUCT(chip->usb_id));
+ USB_ID_PRODUCT(chip->usb_id),
+ SCARLETT2_DISABLE);
return 0;
}
usb_audio_info(chip,
- "Focusrite Scarlett Gen 2/3 Mixer Driver enabled pid=0x%04x",
+ "Focusrite Scarlett Gen 2/3 Mixer Driver enabled (pid=0x%04x); "
+ "report any issues to g@b4.vu",
USB_ID_PRODUCT(chip->usb_id));
err = snd_scarlett_gen2_controls_create(mixer);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 080/158] ALSA: scarlett2: Add correct product series name to messages
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 079/158] ALSA: scarlett2: Default mixer driver to enabled Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 081/158] ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support Greg Kroah-Hartman
` (86 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geoffrey D. Bennett, Takashi Iwai,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit 6e743781d62e28f5fa095e5f31f878819622c143 ]
This driver was originally developed for the Focusrite Scarlett Gen 2
series, but now also supports the Scarlett Gen 3 series, the
Clarett 8Pre USB, and the Clarett+ 8Pre. The messages output by the
driver on initialisation and error include the identifying text
"Scarlett Gen 2/3", but this is no longer accurate, and writing
"Scarlett Gen 2/3/Clarett USB/Clarett+" would be unwieldy.
Add series_name field to the scarlett2_device_entry struct so that
concise and accurate messages can be output.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3774b9d35bf1fbdd6fdad9f3f4f97e9b82ac76bf.1694705811.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: b61a3acada00 ("ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_scarlett_gen2.c | 81 ++++++++++++++++++++++-----------
1 file changed, 54 insertions(+), 27 deletions(-)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index c53ce9b81a7bb..83df5621c98f5 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -391,6 +391,7 @@ struct scarlett2_data {
struct mutex data_mutex; /* lock access to this data */
struct delayed_work work;
const struct scarlett2_device_info *info;
+ const char *series_name;
__u8 bInterfaceNumber;
__u8 bEndpointAddress;
__u16 wMaxPacketSize;
@@ -887,25 +888,26 @@ static const struct scarlett2_device_info clarett_8pre_info = {
struct scarlett2_device_entry {
const u32 usb_id; /* USB device identifier */
const struct scarlett2_device_info *info;
+ const char *series_name;
};
static const struct scarlett2_device_entry scarlett2_devices[] = {
/* Supported Gen 2 devices */
- { USB_ID(0x1235, 0x8203), &s6i6_gen2_info },
- { USB_ID(0x1235, 0x8204), &s18i8_gen2_info },
- { USB_ID(0x1235, 0x8201), &s18i20_gen2_info },
+ { USB_ID(0x1235, 0x8203), &s6i6_gen2_info, "Scarlett Gen 2" },
+ { USB_ID(0x1235, 0x8204), &s18i8_gen2_info, "Scarlett Gen 2" },
+ { USB_ID(0x1235, 0x8201), &s18i20_gen2_info, "Scarlett Gen 2" },
/* Supported Gen 3 devices */
- { USB_ID(0x1235, 0x8211), &solo_gen3_info },
- { USB_ID(0x1235, 0x8210), &s2i2_gen3_info },
- { USB_ID(0x1235, 0x8212), &s4i4_gen3_info },
- { USB_ID(0x1235, 0x8213), &s8i6_gen3_info },
- { USB_ID(0x1235, 0x8214), &s18i8_gen3_info },
- { USB_ID(0x1235, 0x8215), &s18i20_gen3_info },
+ { USB_ID(0x1235, 0x8211), &solo_gen3_info, "Scarlett Gen 3" },
+ { USB_ID(0x1235, 0x8210), &s2i2_gen3_info, "Scarlett Gen 3" },
+ { USB_ID(0x1235, 0x8212), &s4i4_gen3_info, "Scarlett Gen 3" },
+ { USB_ID(0x1235, 0x8213), &s8i6_gen3_info, "Scarlett Gen 3" },
+ { USB_ID(0x1235, 0x8214), &s18i8_gen3_info, "Scarlett Gen 3" },
+ { USB_ID(0x1235, 0x8215), &s18i20_gen3_info, "Scarlett Gen 3" },
/* Supported Clarett USB/Clarett+ devices */
- { USB_ID(0x1235, 0x8208), &clarett_8pre_info },
- { USB_ID(0x1235, 0x820c), &clarett_8pre_info },
+ { USB_ID(0x1235, 0x8208), &clarett_8pre_info, "Clarett USB" },
+ { USB_ID(0x1235, 0x820c), &clarett_8pre_info, "Clarett+" },
/* End of list */
{ 0, NULL },
@@ -1205,8 +1207,8 @@ static int scarlett2_usb(
if (err != req_buf_size) {
usb_audio_err(
mixer->chip,
- "Scarlett Gen 2/3 USB request result cmd %x was %d\n",
- cmd, err);
+ "%s USB request result cmd %x was %d\n",
+ private->series_name, cmd, err);
err = -EINVAL;
goto unlock;
}
@@ -1222,9 +1224,8 @@ static int scarlett2_usb(
if (err != resp_buf_size) {
usb_audio_err(
mixer->chip,
- "Scarlett Gen 2/3 USB response result cmd %x was %d "
- "expected %zu\n",
- cmd, err, resp_buf_size);
+ "%s USB response result cmd %x was %d expected %zu\n",
+ private->series_name, cmd, err, resp_buf_size);
err = -EINVAL;
goto unlock;
}
@@ -1240,9 +1241,10 @@ static int scarlett2_usb(
resp->pad) {
usb_audio_err(
mixer->chip,
- "Scarlett Gen 2/3 USB invalid response; "
+ "%s USB invalid response; "
"cmd tx/rx %d/%d seq %d/%d size %d/%d "
"error %d pad %d\n",
+ private->series_name,
le32_to_cpu(req->cmd), le32_to_cpu(resp->cmd),
le16_to_cpu(req->seq), le16_to_cpu(resp->seq),
resp_size, le16_to_cpu(resp->size),
@@ -3798,7 +3800,7 @@ static int scarlett2_find_fc_interface(struct usb_device *dev,
/* Initialise private data */
static int scarlett2_init_private(struct usb_mixer_interface *mixer,
- const struct scarlett2_device_info *info)
+ const struct scarlett2_device_entry *entry)
{
struct scarlett2_data *private =
kzalloc(sizeof(struct scarlett2_data), GFP_KERNEL);
@@ -3814,7 +3816,8 @@ static int scarlett2_init_private(struct usb_mixer_interface *mixer,
mixer->private_free = scarlett2_private_free;
mixer->private_suspend = scarlett2_private_suspend;
- private->info = info;
+ private->info = entry->info;
+ private->series_name = entry->series_name;
scarlett2_count_mux_io(private);
private->scarlett2_seq = 0;
private->mixer = mixer;
@@ -4135,19 +4138,28 @@ static int scarlett2_init_notify(struct usb_mixer_interface *mixer)
return usb_submit_urb(mixer->urb, GFP_KERNEL);
}
-static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
+static const struct scarlett2_device_entry *get_scarlett2_device_entry(
+ struct usb_mixer_interface *mixer)
{
const struct scarlett2_device_entry *entry = scarlett2_devices;
- int err;
/* Find entry in scarlett2_devices */
while (entry->usb_id && entry->usb_id != mixer->chip->usb_id)
entry++;
if (!entry->usb_id)
- return -EINVAL;
+ return NULL;
+
+ return entry;
+}
+
+static int snd_scarlett_gen2_controls_create(
+ struct usb_mixer_interface *mixer,
+ const struct scarlett2_device_entry *entry)
+{
+ int err;
/* Initialise private data */
- err = scarlett2_init_private(mixer, entry->info);
+ err = scarlett2_init_private(mixer, entry);
if (err < 0)
return err;
@@ -4231,17 +4243,30 @@ static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer)
{
struct snd_usb_audio *chip = mixer->chip;
+ const struct scarlett2_device_entry *entry;
int err;
/* only use UAC_VERSION_2 */
if (!mixer->protocol)
return 0;
+ /* find entry in scarlett2_devices */
+ entry = get_scarlett2_device_entry(mixer);
+ if (!entry) {
+ usb_audio_err(mixer->chip,
+ "%s: missing device entry for %04x:%04x\n",
+ __func__,
+ USB_ID_VENDOR(chip->usb_id),
+ USB_ID_PRODUCT(chip->usb_id));
+ return 0;
+ }
+
if (chip->setup & SCARLETT2_DISABLE) {
usb_audio_info(chip,
- "Focusrite Scarlett Gen 2/3 Mixer Driver disabled "
+ "Focusrite %s Mixer Driver disabled "
"by modprobe options (snd_usb_audio "
"vid=0x%04x pid=0x%04x device_setup=%d)\n",
+ entry->series_name,
USB_ID_VENDOR(chip->usb_id),
USB_ID_PRODUCT(chip->usb_id),
SCARLETT2_DISABLE);
@@ -4249,14 +4274,16 @@ int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer)
}
usb_audio_info(chip,
- "Focusrite Scarlett Gen 2/3 Mixer Driver enabled (pid=0x%04x); "
+ "Focusrite %s Mixer Driver enabled (pid=0x%04x); "
"report any issues to g@b4.vu",
+ entry->series_name,
USB_ID_PRODUCT(chip->usb_id));
- err = snd_scarlett_gen2_controls_create(mixer);
+ err = snd_scarlett_gen2_controls_create(mixer, entry);
if (err < 0)
usb_audio_err(mixer->chip,
- "Error initialising Scarlett Mixer Driver: %d",
+ "Error initialising %s Mixer Driver: %d",
+ entry->series_name,
err);
return err;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 081/158] ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 080/158] ALSA: scarlett2: Add correct product series name to messages Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 082/158] ALSA: scarlett2: Add Focusrite Clarett 2Pre and 4Pre USB support Greg Kroah-Hartman
` (85 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geoffrey D. Bennett, Takashi Iwai,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit b61a3acada0031e7a4922d1340b4296ab95c260b ]
The Focusrite Clarett+ series uses the same protocol as the Scarlett
Gen 2 and Gen 3 series. This patch adds support for the Clarett+ 2Pre
and Clarett+ 4Pre similarly to the existing 8Pre support by adding
appropriate entries to the scarlett2 driver.
The Clarett 2Pre USB and 4Pre USB presumably use the same protocol as
well, so support for them can easily be added if someone can test.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZRL7qjC3tYQllT3H@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_quirks.c | 2 +
sound/usb/mixer_scarlett_gen2.c | 97 ++++++++++++++++++++++++++++++++-
2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index b122d7aedb443..3721d59a56809 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3448,6 +3448,8 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */
case USB_ID(0x1235, 0x8215): /* Focusrite Scarlett 18i20 3rd Gen */
case USB_ID(0x1235, 0x8208): /* Focusrite Clarett 8Pre USB */
+ case USB_ID(0x1235, 0x820a): /* Focusrite Clarett+ 2Pre */
+ case USB_ID(0x1235, 0x820b): /* Focusrite Clarett+ 4Pre */
case USB_ID(0x1235, 0x820c): /* Focusrite Clarett+ 8Pre */
err = snd_scarlett_gen2_init(mixer);
break;
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 83df5621c98f5..653dc7d8fb47c 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -6,7 +6,7 @@
* - 6i6/18i8/18i20 Gen 2
* - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3
* - Clarett 8Pre USB
- * - Clarett+ 8Pre
+ * - Clarett+ 2Pre/4Pre/8Pre
*
* Copyright (c) 2018-2023 by Geoffrey D. Bennett <g at b4.vu>
* Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@gmail.com>
@@ -60,6 +60,10 @@
* Support for Clarett 8Pre USB added in Sep 2023 (thanks to Philippe
* Perrot for confirmation).
*
+ * Support for Clarett+ 4Pre and 2Pre added in Sep 2023 (thanks to
+ * Gregory Rozzo for donating a 4Pre, and David Sherwood and Patrice
+ * Peterson for usbmon output).
+ *
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
* - mixer-matrix gain stages
@@ -832,6 +836,95 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
} },
};
+static const struct scarlett2_device_info clarett_2pre_info = {
+ .config_set = SCARLETT2_CONFIG_SET_CLARETT,
+ .line_out_hw_vol = 1,
+ .level_input_count = 2,
+ .air_input_count = 2,
+
+ .line_out_descrs = {
+ "Monitor L",
+ "Monitor R",
+ "Headphones L",
+ "Headphones R",
+ },
+
+ .port_count = {
+ [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 },
+ [SCARLETT2_PORT_TYPE_ANALOGUE] = { 2, 4 },
+ [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 0 },
+ [SCARLETT2_PORT_TYPE_ADAT] = { 8, 0 },
+ [SCARLETT2_PORT_TYPE_MIX] = { 10, 18 },
+ [SCARLETT2_PORT_TYPE_PCM] = { 4, 12 },
+ },
+
+ .mux_assignment = { {
+ { SCARLETT2_PORT_TYPE_PCM, 0, 12 },
+ { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 },
+ { SCARLETT2_PORT_TYPE_MIX, 0, 18 },
+ { SCARLETT2_PORT_TYPE_NONE, 0, 8 },
+ { 0, 0, 0 },
+ }, {
+ { SCARLETT2_PORT_TYPE_PCM, 0, 8 },
+ { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 },
+ { SCARLETT2_PORT_TYPE_MIX, 0, 18 },
+ { SCARLETT2_PORT_TYPE_NONE, 0, 8 },
+ { 0, 0, 0 },
+ }, {
+ { SCARLETT2_PORT_TYPE_PCM, 0, 2 },
+ { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 },
+ { SCARLETT2_PORT_TYPE_NONE, 0, 26 },
+ { 0, 0, 0 },
+ } },
+};
+
+static const struct scarlett2_device_info clarett_4pre_info = {
+ .config_set = SCARLETT2_CONFIG_SET_CLARETT,
+ .line_out_hw_vol = 1,
+ .level_input_count = 2,
+ .air_input_count = 4,
+
+ .line_out_descrs = {
+ "Monitor L",
+ "Monitor R",
+ "Headphones 1 L",
+ "Headphones 1 R",
+ "Headphones 2 L",
+ "Headphones 2 R",
+ },
+
+ .port_count = {
+ [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 },
+ [SCARLETT2_PORT_TYPE_ANALOGUE] = { 8, 6 },
+ [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 },
+ [SCARLETT2_PORT_TYPE_ADAT] = { 8, 0 },
+ [SCARLETT2_PORT_TYPE_MIX] = { 10, 18 },
+ [SCARLETT2_PORT_TYPE_PCM] = { 8, 18 },
+ },
+
+ .mux_assignment = { {
+ { SCARLETT2_PORT_TYPE_PCM, 0, 18 },
+ { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 6 },
+ { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 },
+ { SCARLETT2_PORT_TYPE_MIX, 0, 18 },
+ { SCARLETT2_PORT_TYPE_NONE, 0, 8 },
+ { 0, 0, 0 },
+ }, {
+ { SCARLETT2_PORT_TYPE_PCM, 0, 14 },
+ { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 6 },
+ { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 },
+ { SCARLETT2_PORT_TYPE_MIX, 0, 18 },
+ { SCARLETT2_PORT_TYPE_NONE, 0, 8 },
+ { 0, 0, 0 },
+ }, {
+ { SCARLETT2_PORT_TYPE_PCM, 0, 12 },
+ { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 6 },
+ { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 },
+ { SCARLETT2_PORT_TYPE_NONE, 0, 24 },
+ { 0, 0, 0 },
+ } },
+};
+
static const struct scarlett2_device_info clarett_8pre_info = {
.config_set = SCARLETT2_CONFIG_SET_CLARETT,
.line_out_hw_vol = 1,
@@ -907,6 +1000,8 @@ static const struct scarlett2_device_entry scarlett2_devices[] = {
/* Supported Clarett USB/Clarett+ devices */
{ USB_ID(0x1235, 0x8208), &clarett_8pre_info, "Clarett USB" },
+ { USB_ID(0x1235, 0x820a), &clarett_2pre_info, "Clarett+" },
+ { USB_ID(0x1235, 0x820b), &clarett_4pre_info, "Clarett+" },
{ USB_ID(0x1235, 0x820c), &clarett_8pre_info, "Clarett+" },
/* End of list */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 082/158] ALSA: scarlett2: Add Focusrite Clarett 2Pre and 4Pre USB support
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 081/158] ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 083/158] PCI/DPC: Use FIELD_GET() Greg Kroah-Hartman
` (84 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geoffrey D. Bennett, Takashi Iwai,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit 2b17b489e47a956c8e93c8f1bcabb0343c851d90 ]
It has been confirmed that all devices in the Focusrite Clarett USB
series work the same as the devices in the Clarett+ series. Add the
missing PIDs to enable support for the Clarett 2Pre and 4Pre USB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZSFB8EVTG1PK1eq/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/mixer_quirks.c | 2 ++
sound/usb/mixer_scarlett_gen2.c | 8 ++++++--
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 3721d59a56809..a331732fed890 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3447,6 +3447,8 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x1235, 0x8213): /* Focusrite Scarlett 8i6 3rd Gen */
case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */
case USB_ID(0x1235, 0x8215): /* Focusrite Scarlett 18i20 3rd Gen */
+ case USB_ID(0x1235, 0x8206): /* Focusrite Clarett 2Pre USB */
+ case USB_ID(0x1235, 0x8207): /* Focusrite Clarett 4Pre USB */
case USB_ID(0x1235, 0x8208): /* Focusrite Clarett 8Pre USB */
case USB_ID(0x1235, 0x820a): /* Focusrite Clarett+ 2Pre */
case USB_ID(0x1235, 0x820b): /* Focusrite Clarett+ 4Pre */
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 653dc7d8fb47c..e5e70abf5286b 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -5,7 +5,7 @@
* Supported models:
* - 6i6/18i8/18i20 Gen 2
* - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3
- * - Clarett 8Pre USB
+ * - Clarett 2Pre/4Pre/8Pre USB
* - Clarett+ 2Pre/4Pre/8Pre
*
* Copyright (c) 2018-2023 by Geoffrey D. Bennett <g at b4.vu>
@@ -64,6 +64,8 @@
* Gregory Rozzo for donating a 4Pre, and David Sherwood and Patrice
* Peterson for usbmon output).
*
+ * Support for Clarett 2Pre and 4Pre USB added in Oct 2023.
+ *
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
* - mixer-matrix gain stages
@@ -999,6 +1001,8 @@ static const struct scarlett2_device_entry scarlett2_devices[] = {
{ USB_ID(0x1235, 0x8215), &s18i20_gen3_info, "Scarlett Gen 3" },
/* Supported Clarett USB/Clarett+ devices */
+ { USB_ID(0x1235, 0x8206), &clarett_2pre_info, "Clarett USB" },
+ { USB_ID(0x1235, 0x8207), &clarett_4pre_info, "Clarett USB" },
{ USB_ID(0x1235, 0x8208), &clarett_8pre_info, "Clarett USB" },
{ USB_ID(0x1235, 0x820a), &clarett_2pre_info, "Clarett+" },
{ USB_ID(0x1235, 0x820b), &clarett_4pre_info, "Clarett+" },
@@ -1197,7 +1201,7 @@ static const struct scarlett2_config
[SCARLETT2_CONFIG_TALKBACK_MAP] = {
.offset = 0xb0, .size = 16, .activate = 10 },
-/* Clarett+ 8Pre */
+/* Clarett USB and Clarett+ devices: 2Pre, 4Pre, 8Pre */
}, {
[SCARLETT2_CONFIG_DIM_MUTE] = {
.offset = 0x31, .size = 8, .activate = 2 },
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 083/158] PCI/DPC: Use FIELD_GET()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 082/158] ALSA: scarlett2: Add Focusrite Clarett 2Pre and 4Pre USB support Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 084/158] PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() Greg Kroah-Hartman
` (83 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilpo Järvinen, Bjorn Helgaas,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <bhelgaas@google.com>
[ Upstream commit 9a9eec4765737b9b2a8d6ae03de6480a5f12dd5c ]
Use FIELD_GET() to remove dependencies on the field position, i.e., the
shift value. No functional change intended.
Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/pcie/dpc.c | 5 +++--
drivers/pci/quirks.c | 2 +-
include/uapi/linux/pci_regs.h | 1 +
3 files changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -9,6 +9,7 @@
#define dev_fmt(fmt) "DPC: " fmt
#include <linux/aer.h>
+#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@@ -202,7 +203,7 @@ static void dpc_process_rp_pio_error(str
/* Get First Error Pointer */
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &dpc_status);
- first_error = (dpc_status & 0x1f00) >> 8;
+ first_error = FIELD_GET(PCI_EXP_DPC_RP_PIO_FEP, dpc_status);
for (i = 0; i < ARRAY_SIZE(rp_pio_error_string); i++) {
if ((status & ~mask) & (1 << i))
@@ -338,7 +339,7 @@ void pci_dpc_init(struct pci_dev *pdev)
/* Quirks may set dpc_rp_log_size if device or firmware is buggy */
if (!pdev->dpc_rp_log_size) {
pdev->dpc_rp_log_size =
- (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
+ FIELD_GET(PCI_EXP_DPC_RP_PIO_LOG_SIZE, cap);
if (pdev->dpc_rp_log_size < 4 || pdev->dpc_rp_log_size > 9) {
pci_err(pdev, "RP PIO log size %u is invalid\n",
pdev->dpc_rp_log_size);
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -6198,7 +6198,7 @@ static void dpc_log_size(struct pci_dev
if (!(val & PCI_EXP_DPC_CAP_RP_EXT))
return;
- if (!((val & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8)) {
+ if (FIELD_GET(PCI_EXP_DPC_RP_PIO_LOG_SIZE, val) == 0) {
pci_info(dev, "Overriding RP PIO Log Size to 4\n");
dev->dpc_rp_log_size = 4;
}
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -1045,6 +1045,7 @@
#define PCI_EXP_DPC_STATUS_INTERRUPT 0x0008 /* Interrupt Status */
#define PCI_EXP_DPC_RP_BUSY 0x0010 /* Root Port Busy */
#define PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */
+#define PCI_EXP_DPC_RP_PIO_FEP 0x1f00 /* RP PIO First Err Ptr */
#define PCI_EXP_DPC_SOURCE_ID 0x0A /* DPC Source Identifier */
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 084/158] PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 083/158] PCI/DPC: Use FIELD_GET() Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 085/158] ALSA: scarlett2: Rename scarlett_gen2 to scarlett2 Greg Kroah-Hartman
` (82 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ilpo Järvinen, Bjorn Helgaas,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[ Upstream commit 0fce6e5c87faec2c8bf28d2abc8cb595f4e244b6 ]
When using pcie_capability_clear_and_set_word() but not actually *setting*
anything, use pcie_capability_clear_word() instead.
Link: https://lore.kernel.org/r/20231026121924.2164-1-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/r/20231026121924.2164-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/pcie/aspm.c | 8 ++++----
drivers/pci/quirks.c | 6 +++---
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 7e3b342215e5b..19a673aa08eb2 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -689,10 +689,10 @@ static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
* in pcie_config_aspm_link().
*/
if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
- pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPM_L1, 0);
- pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPM_L1, 0);
+ pcie_capability_clear_word(child, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPM_L1);
+ pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPM_L1);
}
val = 0;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e1c652b1c53a4..fa770601c655a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4571,9 +4571,9 @@ static void quirk_disable_root_port_attributes(struct pci_dev *pdev)
pci_info(root_port, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n",
dev_name(&pdev->dev));
- pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL,
- PCI_EXP_DEVCTL_RELAX_EN |
- PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
+ pcie_capability_clear_word(root_port, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_RELAX_EN |
+ PCI_EXP_DEVCTL_NOSNOOP_EN);
}
/*
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 085/158] ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 084/158] PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 086/158] drm: panel-orientation-quirks: Add quirk for Lenovo Legion Go Greg Kroah-Hartman
` (81 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Geoffrey D. Bennett, Takashi Iwai,
Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geoffrey D. Bennett <g@b4.vu>
[ Upstream commit efc3d7d20361cc59325a9f0525e079333b4459c0 ]
This driver was originally developed for the Focusrite Scarlett Gen 2
series. Since then Focusrite have used a similar protocol for their
Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series.
Let's call this common protocol the "Scarlett 2 Protocol" and rename
the driver to scarlett2 to not imply that it is restricted to Gen 2
series devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e1ad7f69a1e20cdb39094164504389160c1a0a0b.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
MAINTAINERS | 2 +-
sound/usb/Makefile | 2 +-
sound/usb/mixer_quirks.c | 4 ++--
.../usb/{mixer_scarlett_gen2.c => mixer_scarlett2.c} | 12 +++++++-----
sound/usb/mixer_scarlett2.h | 7 +++++++
sound/usb/mixer_scarlett_gen2.h | 7 -------
6 files changed, 18 insertions(+), 16 deletions(-)
rename sound/usb/{mixer_scarlett_gen2.c => mixer_scarlett2.c} (99%)
create mode 100644 sound/usb/mixer_scarlett2.h
delete mode 100644 sound/usb/mixer_scarlett_gen2.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 40312bb550f06..72a2880afab7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8142,7 +8142,7 @@ M: Geoffrey D. Bennett <g@b4.vu>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
-F: sound/usb/mixer_scarlett_gen2.c
+F: sound/usb/mixer_scarlett2.c
FORCEDETH GIGABIT ETHERNET DRIVER
M: Rain River <rain.1986.08.12@gmail.com>
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index db5ff76d0e61f..8c657c2753c84 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -12,7 +12,7 @@ snd-usb-audio-objs := card.o \
mixer.o \
mixer_quirks.o \
mixer_scarlett.o \
- mixer_scarlett_gen2.o \
+ mixer_scarlett2.o \
mixer_us16x08.o \
mixer_s1810c.o \
pcm.o \
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index a331732fed890..c8d48566e1759 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -33,7 +33,7 @@
#include "mixer.h"
#include "mixer_quirks.h"
#include "mixer_scarlett.h"
-#include "mixer_scarlett_gen2.h"
+#include "mixer_scarlett2.h"
#include "mixer_us16x08.h"
#include "mixer_s1810c.h"
#include "helper.h"
@@ -3453,7 +3453,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x1235, 0x820a): /* Focusrite Clarett+ 2Pre */
case USB_ID(0x1235, 0x820b): /* Focusrite Clarett+ 4Pre */
case USB_ID(0x1235, 0x820c): /* Focusrite Clarett+ 8Pre */
- err = snd_scarlett_gen2_init(mixer);
+ err = snd_scarlett2_init(mixer);
break;
case USB_ID(0x041e, 0x323b): /* Creative Sound Blaster E1 */
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett2.c
similarity index 99%
rename from sound/usb/mixer_scarlett_gen2.c
rename to sound/usb/mixer_scarlett2.c
index e5e70abf5286b..90480b9b9b089 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett2.c
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Focusrite Scarlett Gen 2/3 and Clarett USB/Clarett+ Driver for ALSA
+ * Focusrite Scarlett 2 Protocol Driver for ALSA
+ * (including Scarlett 2nd Gen, 3rd Gen, Clarett USB, and Clarett+
+ * series products)
*
* Supported models:
* - 6i6/18i8/18i20 Gen 2
@@ -149,7 +151,7 @@
#include "mixer.h"
#include "helper.h"
-#include "mixer_scarlett_gen2.h"
+#include "mixer_scarlett2.h"
/* device_setup value to allow turning MSD mode back on */
#define SCARLETT2_MSD_ENABLE 0x02
@@ -4251,7 +4253,7 @@ static const struct scarlett2_device_entry *get_scarlett2_device_entry(
return entry;
}
-static int snd_scarlett_gen2_controls_create(
+static int snd_scarlett2_controls_create(
struct usb_mixer_interface *mixer,
const struct scarlett2_device_entry *entry)
{
@@ -4339,7 +4341,7 @@ static int snd_scarlett_gen2_controls_create(
return 0;
}
-int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer)
+int snd_scarlett2_init(struct usb_mixer_interface *mixer)
{
struct snd_usb_audio *chip = mixer->chip;
const struct scarlett2_device_entry *entry;
@@ -4378,7 +4380,7 @@ int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer)
entry->series_name,
USB_ID_PRODUCT(chip->usb_id));
- err = snd_scarlett_gen2_controls_create(mixer, entry);
+ err = snd_scarlett2_controls_create(mixer, entry);
if (err < 0)
usb_audio_err(mixer->chip,
"Error initialising %s Mixer Driver: %d",
diff --git a/sound/usb/mixer_scarlett2.h b/sound/usb/mixer_scarlett2.h
new file mode 100644
index 0000000000000..d209362cf41a6
--- /dev/null
+++ b/sound/usb/mixer_scarlett2.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __USB_MIXER_SCARLETT2_H
+#define __USB_MIXER_SCARLETT2_H
+
+int snd_scarlett2_init(struct usb_mixer_interface *mixer);
+
+#endif /* __USB_MIXER_SCARLETT2_H */
diff --git a/sound/usb/mixer_scarlett_gen2.h b/sound/usb/mixer_scarlett_gen2.h
deleted file mode 100644
index 668c6b0cb50a6..0000000000000
--- a/sound/usb/mixer_scarlett_gen2.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __USB_MIXER_SCARLETT_GEN2_H
-#define __USB_MIXER_SCARLETT_GEN2_H
-
-int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer);
-
-#endif /* __USB_MIXER_SCARLETT_GEN2_H */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 086/158] drm: panel-orientation-quirks: Add quirk for Lenovo Legion Go
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 085/158] ALSA: scarlett2: Rename scarlett_gen2 to scarlett2 Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 087/158] usb: xhci: Add timeout argument in address_device USB HCD callback Greg Kroah-Hartman
` (80 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Brenton Simpson, Hans de Goede, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brenton Simpson <appsforartists@google.com>
[ Upstream commit 430143b0d3611f4a9c8434319e5e504244749e79 ]
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing
the right controller (90° CW from the rest of the device).
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 3fe5e6439c401..aa93129c3397e 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -348,6 +348,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "IdeaPad Duet 3 10IGL5"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
+ }, { /* Lenovo Legion Go 8APU1 */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Legion Go 8APU1"),
+ },
+ .driver_data = (void *)&lcd1600x2560_leftside_up,
}, { /* Lenovo Yoga Book X90F / X90L */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 087/158] usb: xhci: Add timeout argument in address_device USB HCD callback
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 086/158] drm: panel-orientation-quirks: Add quirk for Lenovo Legion Go Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 088/158] usb: new quirk to reduce the SET_ADDRESS request timeout Greg Kroah-Hartman
` (79 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hardik Gajjar, Mathias Nyman, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hardik Gajjar <hgajjar@de.adit-jv.com>
[ Upstream commit a769154c7cac037914ba375ae88aae55b2c853e0 ]
- The HCD address_device callback now accepts a user-defined timeout value
in milliseconds, providing better control over command execution times.
- The default timeout value for the address_device command has been set
to 5000 ms, aligning with the USB 3.2 specification. However, this
timeout can be adjusted as needed.
- The xhci_setup_device function has been updated to accept the timeout
value, allowing it to specify the maximum wait time for the command
operation to complete.
- The hub driver has also been updated to accommodate the newly added
timeout parameter during the SET_ADDRESS request.
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231027152029.104363-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 5a1ccf0c72cf ("usb: new quirk to reduce the SET_ADDRESS request timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/core/hub.c | 2 +-
drivers/usb/host/xhci-mem.c | 2 ++
drivers/usb/host/xhci-ring.c | 11 ++++++-----
drivers/usb/host/xhci.c | 23 ++++++++++++++++-------
drivers/usb/host/xhci.h | 9 +++++++--
include/linux/usb/hcd.h | 5 +++--
6 files changed, 35 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9a3da5d7fe1bc..73ab30e0da774 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4676,7 +4676,7 @@ static int hub_set_address(struct usb_device *udev, int devnum)
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
if (hcd->driver->address_device)
- retval = hcd->driver->address_device(hcd, udev);
+ retval = hcd->driver->address_device(hcd, udev, USB_CTRL_SET_TIMEOUT);
else
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, devnum, 0,
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0a37f0d511cf5..b1e3fa54c6397 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1729,6 +1729,8 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
}
command->status = 0;
+ /* set default timeout to 5000 ms */
+ command->timeout_ms = XHCI_CMD_DEFAULT_TIMEOUT;
INIT_LIST_HEAD(&command->cmd_list);
return command;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3ec1a2617ed7e..c959d9144baa5 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -372,9 +372,10 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
readl(&xhci->dba->doorbell[0]);
}
-static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
+static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci)
{
- return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
+ return mod_delayed_work(system_wq, &xhci->cmd_timer,
+ msecs_to_jiffies(xhci->current_cmd->timeout_ms));
}
static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
@@ -418,7 +419,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
!(xhci->xhc_state & XHCI_STATE_DYING)) {
xhci->current_cmd = cur_cmd;
- xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci);
xhci_ring_cmd_db(xhci);
}
}
@@ -1792,7 +1793,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
if (!list_is_singular(&xhci->cmd_list)) {
xhci->current_cmd = list_first_entry(&cmd->cmd_list,
struct xhci_command, cmd_list);
- xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci);
} else if (xhci->current_cmd == cmd) {
xhci->current_cmd = NULL;
}
@@ -4359,7 +4360,7 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
/* if there are no other commands queued we start the timeout timer */
if (list_empty(&xhci->cmd_list)) {
xhci->current_cmd = cmd;
- xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
+ xhci_mod_cmd_timer(xhci);
}
list_add_tail(&cmd->cmd_list, &xhci->cmd_list);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c4c733d724bd8..573b5784d1c3d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4007,12 +4007,18 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
return 0;
}
-/*
- * Issue an Address Device command and optionally send a corresponding
- * SetAddress request to the device.
+/**
+ * xhci_setup_device - issues an Address Device command to assign a unique
+ * USB bus address.
+ * @hcd: USB host controller data structure.
+ * @udev: USB dev structure representing the connected device.
+ * @setup: Enum specifying setup mode: address only or with context.
+ * @timeout_ms: Max wait time (ms) for the command operation to complete.
+ *
+ * Return: 0 if successful; otherwise, negative error code.
*/
static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
- enum xhci_setup_dev setup)
+ enum xhci_setup_dev setup, unsigned int timeout_ms)
{
const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address";
unsigned long flags;
@@ -4069,6 +4075,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
}
command->in_ctx = virt_dev->in_ctx;
+ command->timeout_ms = timeout_ms;
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
@@ -4195,14 +4202,16 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
return ret;
}
-static int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+static int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev,
+ unsigned int timeout_ms)
{
- return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS);
+ return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS, timeout_ms);
}
static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev)
{
- return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY);
+ return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY,
+ XHCI_CMD_DEFAULT_TIMEOUT);
}
/*
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 31088602c0708..be480d6ac8586 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -818,6 +818,8 @@ struct xhci_command {
struct completion *completion;
union xhci_trb *command_trb;
struct list_head cmd_list;
+ /* xHCI command response timeout in milliseconds */
+ unsigned int timeout_ms;
};
/* drop context bitmasks */
@@ -1577,8 +1579,11 @@ struct xhci_td {
unsigned int num_trbs;
};
-/* xHCI command default timeout value */
-#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * xHCI command default timeout value in milliseconds.
+ * USB 3.2 spec, section 9.2.6.1
+ */
+#define XHCI_CMD_DEFAULT_TIMEOUT 5000
/* command descriptor */
struct xhci_cd {
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 00724b4f6e122..cd77fc6095a15 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -372,8 +372,9 @@ struct hc_driver {
* or bandwidth constraints.
*/
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
- /* Returns the hardware-chosen device address */
- int (*address_device)(struct usb_hcd *, struct usb_device *udev);
+ /* Set the hardware-chosen device address */
+ int (*address_device)(struct usb_hcd *, struct usb_device *udev,
+ unsigned int timeout_ms);
/* prepares the hardware to send commands to the device */
int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
/* Notifies the HCD after a hub descriptor is fetched.
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 088/158] usb: new quirk to reduce the SET_ADDRESS request timeout
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 087/158] usb: xhci: Add timeout argument in address_device USB HCD callback Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 089/158] platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes Greg Kroah-Hartman
` (78 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Hardik Gajjar, Alan Stern, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hardik Gajjar <hgajjar@de.adit-jv.com>
[ Upstream commit 5a1ccf0c72cf917ff3ccc131d1bb8d19338ffe52 ]
This patch introduces a new USB quirk,
USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT, which modifies the timeout value
for the SET_ADDRESS request. The standard timeout for USB request/command
is 5000 ms, as recommended in the USB 3.2 specification (section 9.2.6.1).
However, certain scenarios, such as connecting devices through an APTIV
hub, can lead to timeout errors when the device enumerates as full speed
initially and later switches to high speed during chirp negotiation.
In such cases, USB analyzer logs reveal that the bus suspends for
5 seconds due to incorrect chirp parsing and resumes only after two
consecutive timeout errors trigger a hub driver reset.
Packet(54) Dir(?) Full Speed J(997.100 us) Idle( 2.850 us)
_______| Time Stamp(28 . 105 910 682)
_______|_____________________________________________________________Ch0
Packet(55) Dir(?) Full Speed J(997.118 us) Idle( 2.850 us)
_______| Time Stamp(28 . 106 910 632)
_______|_____________________________________________________________Ch0
Packet(56) Dir(?) Full Speed J(399.650 us) Idle(222.582 us)
_______| Time Stamp(28 . 107 910 600)
_______|_____________________________________________________________Ch0
Packet(57) Dir Chirp J( 23.955 ms) Idle(115.169 ms)
_______| Time Stamp(28 . 108 532 832)
_______|_____________________________________________________________Ch0
Packet(58) Dir(?) Full Speed J (Suspend)( 5.347 sec) Idle( 5.366 us)
_______| Time Stamp(28 . 247 657 600)
_______|_____________________________________________________________Ch0
This 5-second delay in device enumeration is undesirable, particularly
in automotive applications where quick enumeration is crucial
(ideally within 3 seconds).
The newly introduced quirks provide the flexibility to align with a
3-second time limit, as required in specific contexts like automotive
applications.
By reducing the SET_ADDRESS request timeout to 500 ms, the
system can respond more swiftly to errors, initiate rapid recovery, and
ensure efficient device enumeration. This change is vital for scenarios
where rapid smartphone enumeration and screen projection are essential.
To use the quirk, please write "vendor_id:product_id:p" to
/sys/bus/usb/drivers/hub/module/parameter/quirks
For example,
echo "0x2c48:0x0132:p" > /sys/bus/usb/drivers/hub/module/parameters/quirks"
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231027152029.104363-2-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Documentation/admin-guide/kernel-parameters.txt | 3 +++
drivers/usb/core/hub.c | 15 +++++++++++++--
drivers/usb/core/quirks.c | 7 +++++++
include/linux/usb/quirks.h | 3 +++
4 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 4cd15aee16c20..66dfc348043d6 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -6853,6 +6853,9 @@
pause after every control message);
o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
delay after resetting its port);
+ p = USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT
+ (Reduce timeout of the SET_ADDRESS
+ request from 5000 ms to 500 ms);
Example: quirks=0781:5580:bk,0a5c:5834:gij
usbhid.mousepoll=
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 73ab30e0da774..7417972202b8b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -60,6 +60,12 @@
#define USB_PING_RESPONSE_TIME 400 /* ns */
#define USB_REDUCE_FRAME_INTR_BINTERVAL 9
+/*
+ * The SET_ADDRESS request timeout will be 500 ms when
+ * USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT quirk flag is set.
+ */
+#define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT 500 /* ms */
+
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
@@ -4663,7 +4669,12 @@ EXPORT_SYMBOL_GPL(usb_ep0_reinit);
static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
+ unsigned int timeout_ms = USB_CTRL_SET_TIMEOUT;
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+ if (hub->hdev->quirks & USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT)
+ timeout_ms = USB_SHORT_SET_ADDRESS_REQ_TIMEOUT;
/*
* The host controller will choose the device address,
@@ -4676,11 +4687,11 @@ static int hub_set_address(struct usb_device *udev, int devnum)
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
if (hcd->driver->address_device)
- retval = hcd->driver->address_device(hcd, udev, USB_CTRL_SET_TIMEOUT);
+ retval = hcd->driver->address_device(hcd, udev, timeout_ms);
else
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, devnum, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ NULL, 0, timeout_ms);
if (retval == 0) {
update_devnum(udev, devnum);
/* Device now using proper address. */
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 15e9bd180a1d2..b4783574b8e66 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -138,6 +138,9 @@ static int quirks_param_set(const char *value, const struct kernel_param *kp)
case 'o':
flags |= USB_QUIRK_HUB_SLOW_RESET;
break;
+ case 'p':
+ flags |= USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT;
+ break;
/* Ignore unrecognized flag characters */
}
}
@@ -527,6 +530,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM },
+ /* APTIV AUTOMOTIVE HUB */
+ { USB_DEVICE(0x2c48, 0x0132), .driver_info =
+ USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT },
+
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index eeb7c2157c72f..59409c1fc3dee 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -72,4 +72,7 @@
/* device has endpoints that should be ignored */
#define USB_QUIRK_ENDPOINT_IGNORE BIT(15)
+/* short SET_ADDRESS request timeout */
+#define USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT BIT(16)
+
#endif /* __LINUX_USB_QUIRKS_H */
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 089/158] platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 088/158] usb: new quirk to reduce the SET_ADDRESS request timeout Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 090/158] interconnect: Dont access req_list while its being manipulated Greg Kroah-Hartman
` (77 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mario Limonciello, Hans de Goede,
Ilpo Järvinen, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <mario.limonciello@amd.com>
[ Upstream commit f609e7b1b49e4d15cf107d2069673ee63860c398 ]
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/amd/pmc/pmc-quirks.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/amd/pmc/pmc-quirks.c b/drivers/platform/x86/amd/pmc/pmc-quirks.c
index b456370166b6b..b4f49720c87f6 100644
--- a/drivers/platform/x86/amd/pmc/pmc-quirks.c
+++ b/drivers/platform/x86/amd/pmc/pmc-quirks.c
@@ -208,6 +208,15 @@ static const struct dmi_system_id fwbug_list[] = {
DMI_MATCH(DMI_BIOS_VERSION, "03.03"),
}
},
+ {
+ .ident = "Framework Laptop 13 (Phoenix)",
+ .driver_data = &quirk_spurious_8042,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Framework"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Laptop 13 (AMD Ryzen 7040Series)"),
+ DMI_MATCH(DMI_BIOS_VERSION, "03.05"),
+ }
+ },
{}
};
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 090/158] interconnect: Dont access req_list while its being manipulated
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 089/158] platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 091/158] clk: Remove prepare_lock hold assertion in __clk_release() Greg Kroah-Hartman
` (76 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mike Tipton, Rob Clark,
Georgi Djakov, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Tipton <quic_mdtipton@quicinc.com>
[ Upstream commit de1bf25b6d771abdb52d43546cf57ad775fb68a1 ]
The icc_lock mutex was split into separate icc_lock and icc_bw_lock
mutexes in [1] to avoid lockdep splats. However, this didn't adequately
protect access to icc_node::req_list.
The icc_set_bw() function will eventually iterate over req_list while
only holding icc_bw_lock, but req_list can be modified while only
holding icc_lock. This causes races between icc_set_bw(), of_icc_get(),
and icc_put().
Example A:
CPU0 CPU1
---- ----
icc_set_bw(path_a)
mutex_lock(&icc_bw_lock);
icc_put(path_b)
mutex_lock(&icc_lock);
aggregate_requests()
hlist_for_each_entry(r, ...
hlist_del(...
<r = invalid pointer>
Example B:
CPU0 CPU1
---- ----
icc_set_bw(path_a)
mutex_lock(&icc_bw_lock);
path_b = of_icc_get()
of_icc_get_by_index()
mutex_lock(&icc_lock);
path_find()
path_init()
aggregate_requests()
hlist_for_each_entry(r, ...
hlist_add_head(...
<r = invalid pointer>
Fix this by ensuring icc_bw_lock is always held before manipulating
icc_node::req_list. The additional places icc_bw_lock is held don't
perform any memory allocations, so we should still be safe from the
original lockdep splats that motivated the separate locks.
[1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: af42269c3523 ("interconnect: Fix locking for runpm vs reclaim")
Reviewed-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20240305225652.22872-1-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/interconnect/core.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index 50bac2d79d9b5..68edb07d4443e 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -176,6 +176,8 @@ static struct icc_path *path_init(struct device *dev, struct icc_node *dst,
path->num_nodes = num_nodes;
+ mutex_lock(&icc_bw_lock);
+
for (i = num_nodes - 1; i >= 0; i--) {
node->provider->users++;
hlist_add_head(&path->reqs[i].req_node, &node->req_list);
@@ -186,6 +188,8 @@ static struct icc_path *path_init(struct device *dev, struct icc_node *dst,
node = node->reverse;
}
+ mutex_unlock(&icc_bw_lock);
+
return path;
}
@@ -792,12 +796,16 @@ void icc_put(struct icc_path *path)
pr_err("%s: error (%d)\n", __func__, ret);
mutex_lock(&icc_lock);
+ mutex_lock(&icc_bw_lock);
+
for (i = 0; i < path->num_nodes; i++) {
node = path->reqs[i].node;
hlist_del(&path->reqs[i].req_node);
if (!WARN_ON(!node->provider->users))
node->provider->users--;
}
+
+ mutex_unlock(&icc_bw_lock);
mutex_unlock(&icc_lock);
kfree_const(path->name);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 091/158] clk: Remove prepare_lock hold assertion in __clk_release()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 090/158] interconnect: Dont access req_list while its being manipulated Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 092/158] clk: Initialize struct clk_core kref earlier Greg Kroah-Hartman
` (75 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Krzysztof Kozlowski,
Douglas Anderson, Stephen Boyd, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <sboyd@kernel.org>
[ Upstream commit 8358a76cfb47c9a5af627a0c4e7168aa14fa25f6 ]
Removing this assertion lets us move the kref_put() call outside the
prepare_lock section. We don't need to hold the prepare_lock here to
free memory and destroy the clk_core structure. We've already unlinked
the clk from the clk tree and by the time the release function runs
nothing holds a reference to the clk_core anymore so anything with the
pointer can't access the memory that's being freed anyway. Way back in
commit 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of
prepare_lock") we didn't need to have this assertion either.
Fixes: 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock")
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-2-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 50228cb0c5590..ac5be561ccdc9 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -4313,8 +4313,6 @@ static void __clk_release(struct kref *ref)
{
struct clk_core *core = container_of(ref, struct clk_core, ref);
- lockdep_assert_held(&prepare_lock);
-
clk_core_free_parent_map(core);
kfree_const(core->name);
kfree(core);
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 092/158] clk: Initialize struct clk_core kref earlier
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 091/158] clk: Remove prepare_lock hold assertion in __clk_release() Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 093/158] clk: Get runtime PM before walking tree during disable_unused Greg Kroah-Hartman
` (74 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Douglas Anderson, Stephen Boyd, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <sboyd@kernel.org>
[ Upstream commit 9d05ae531c2cff20d5d527f04e28d28e04379929 ]
Initialize this kref once we allocate memory for the struct clk_core so
that we can reuse the release function to free any memory associated
with the structure. This mostly consolidates code, but also clarifies
that the kref lifetime exists once the container structure (struct
clk_core) is allocated instead of leaving it in a half-baked state for
most of __clk_core_init().
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-4-sboyd@kernel.org
Stable-dep-of: e581cf5d2162 ("clk: Get runtime PM before walking tree during disable_unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk.c | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index ac5be561ccdc9..56b8f540e8abe 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3919,8 +3919,6 @@ static int __clk_core_init(struct clk_core *core)
}
clk_core_reparent_orphans_nolock();
-
- kref_init(&core->ref);
out:
clk_pm_runtime_put(core);
unlock:
@@ -4149,6 +4147,16 @@ static void clk_core_free_parent_map(struct clk_core *core)
kfree(core->parents);
}
+/* Free memory allocated for a struct clk_core */
+static void __clk_release(struct kref *ref)
+{
+ struct clk_core *core = container_of(ref, struct clk_core, ref);
+
+ clk_core_free_parent_map(core);
+ kfree_const(core->name);
+ kfree(core);
+}
+
static struct clk *
__clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
{
@@ -4169,6 +4177,8 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
goto fail_out;
}
+ kref_init(&core->ref);
+
core->name = kstrdup_const(init->name, GFP_KERNEL);
if (!core->name) {
ret = -ENOMEM;
@@ -4223,12 +4233,10 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
hw->clk = NULL;
fail_create_clk:
- clk_core_free_parent_map(core);
fail_parents:
fail_ops:
- kfree_const(core->name);
fail_name:
- kfree(core);
+ kref_put(&core->ref, __clk_release);
fail_out:
return ERR_PTR(ret);
}
@@ -4308,16 +4316,6 @@ int of_clk_hw_register(struct device_node *node, struct clk_hw *hw)
}
EXPORT_SYMBOL_GPL(of_clk_hw_register);
-/* Free memory allocated for a clock. */
-static void __clk_release(struct kref *ref)
-{
- struct clk_core *core = container_of(ref, struct clk_core, ref);
-
- clk_core_free_parent_map(core);
- kfree_const(core->name);
- kfree(core);
-}
-
/*
* Empty clk_ops for unregistered clocks. These are used temporarily
* after clk_unregister() was called on a clock and until last clock
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 093/158] clk: Get runtime PM before walking tree during disable_unused
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 092/158] clk: Initialize struct clk_core kref earlier Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 094/158] clk: Show active consumers of clocks in debugfs Greg Kroah-Hartman
` (73 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Douglas Anderson, Marek Szyprowski,
Ulf Hansson, Krzysztof Kozlowski, Stephen Boyd, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <sboyd@kernel.org>
[ Upstream commit e581cf5d216289ef292d1a4036d53ce90e122469 ]
Doug reported [1] the following hung task:
INFO: task swapper/0:1 blocked for more than 122 seconds.
Not tainted 5.15.149-21875-gf795ebc40eb8 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008
Call trace:
__switch_to+0xf4/0x1f4
__schedule+0x418/0xb80
schedule+0x5c/0x10c
rpm_resume+0xe0/0x52c
rpm_resume+0x178/0x52c
__pm_runtime_resume+0x58/0x98
clk_pm_runtime_get+0x30/0xb0
clk_disable_unused_subtree+0x58/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused_subtree+0x38/0x208
clk_disable_unused+0x4c/0xe4
do_one_initcall+0xcc/0x2d8
do_initcall_level+0xa4/0x148
do_initcalls+0x5c/0x9c
do_basic_setup+0x24/0x30
kernel_init_freeable+0xec/0x164
kernel_init+0x28/0x120
ret_from_fork+0x10/0x20
INFO: task kworker/u16:0:9 blocked for more than 122 seconds.
Not tainted 5.15.149-21875-gf795ebc40eb8 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__switch_to+0xf4/0x1f4
__schedule+0x418/0xb80
schedule+0x5c/0x10c
schedule_preempt_disabled+0x2c/0x48
__mutex_lock+0x238/0x488
__mutex_lock_slowpath+0x1c/0x28
mutex_lock+0x50/0x74
clk_prepare_lock+0x7c/0x9c
clk_core_prepare_lock+0x20/0x44
clk_prepare+0x24/0x30
clk_bulk_prepare+0x40/0xb0
mdss_runtime_resume+0x54/0x1c8
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x108/0x1f4
__rpm_callback+0x84/0x144
rpm_callback+0x30/0x88
rpm_resume+0x1f4/0x52c
rpm_resume+0x178/0x52c
__pm_runtime_resume+0x58/0x98
__device_attach+0xe0/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x3c/0x9c
device_add+0x644/0x814
mipi_dsi_device_register_full+0xe4/0x170
devm_mipi_dsi_device_register_full+0x28/0x70
ti_sn_bridge_probe+0x1dc/0x2c0
auxiliary_bus_probe+0x4c/0x94
really_probe+0xcc/0x2c8
__driver_probe_device+0xa8/0x130
driver_probe_device+0x48/0x110
__device_attach_driver+0xa4/0xcc
bus_for_each_drv+0x8c/0xd8
__device_attach+0xf8/0x170
device_initial_probe+0x1c/0x28
bus_probe_device+0x3c/0x9c
deferred_probe_work_func+0x9c/0xd8
process_one_work+0x148/0x518
worker_thread+0x138/0x350
kthread+0x138/0x1e0
ret_from_fork+0x10/0x20
The first thread is walking the clk tree and calling
clk_pm_runtime_get() to power on devices required to read the clk
hardware via struct clk_ops::is_enabled(). This thread holds the clk
prepare_lock, and is trying to runtime PM resume a device, when it finds
that the device is in the process of resuming so the thread schedule()s
away waiting for the device to finish resuming before continuing. The
second thread is runtime PM resuming the same device, but the runtime
resume callback is calling clk_prepare(), trying to grab the
prepare_lock waiting on the first thread.
This is a classic ABBA deadlock. To properly fix the deadlock, we must
never runtime PM resume or suspend a device with the clk prepare_lock
held. Actually doing that is near impossible today because the global
prepare_lock would have to be dropped in the middle of the tree, the
device runtime PM resumed/suspended, and then the prepare_lock grabbed
again to ensure consistency of the clk tree topology. If anything
changes with the clk tree in the meantime, we've lost and will need to
start the operation all over again.
Luckily, most of the time we're simply incrementing or decrementing the
runtime PM count on an active device, so we don't have the chance to
schedule away with the prepare_lock held. Let's fix this immediate
problem that can be triggered more easily by simply booting on Qualcomm
sc7180.
Introduce a list of clk_core structures that have been registered, or
are in the process of being registered, that require runtime PM to
operate. Iterate this list and call clk_pm_runtime_get() on each of them
without holding the prepare_lock during clk_disable_unused(). This way
we can be certain that the runtime PM state of the devices will be
active and resumed so we can't schedule away while walking the clk tree
with the prepare_lock held. Similarly, call clk_pm_runtime_put() without
the prepare_lock held to properly drop the runtime PM reference. We
remove the calls to clk_pm_runtime_{get,put}() in this path because
they're superfluous now that we know the devices are runtime resumed.
Reported-by: Douglas Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1]
Closes: https://issuetracker.google.com/328070191
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk.c | 117 +++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 105 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 56b8f540e8abe..7c87a8084df76 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -37,6 +37,10 @@ static HLIST_HEAD(clk_root_list);
static HLIST_HEAD(clk_orphan_list);
static LIST_HEAD(clk_notifier_list);
+/* List of registered clks that use runtime PM */
+static HLIST_HEAD(clk_rpm_list);
+static DEFINE_MUTEX(clk_rpm_list_lock);
+
static const struct hlist_head *all_lists[] = {
&clk_root_list,
&clk_orphan_list,
@@ -59,6 +63,7 @@ struct clk_core {
struct clk_hw *hw;
struct module *owner;
struct device *dev;
+ struct hlist_node rpm_node;
struct device_node *of_node;
struct clk_core *parent;
struct clk_parent_map *parents;
@@ -122,6 +127,89 @@ static void clk_pm_runtime_put(struct clk_core *core)
pm_runtime_put_sync(core->dev);
}
+/**
+ * clk_pm_runtime_get_all() - Runtime "get" all clk provider devices
+ *
+ * Call clk_pm_runtime_get() on all runtime PM enabled clks in the clk tree so
+ * that disabling unused clks avoids a deadlock where a device is runtime PM
+ * resuming/suspending and the runtime PM callback is trying to grab the
+ * prepare_lock for something like clk_prepare_enable() while
+ * clk_disable_unused_subtree() holds the prepare_lock and is trying to runtime
+ * PM resume/suspend the device as well.
+ *
+ * Context: Acquires the 'clk_rpm_list_lock' and returns with the lock held on
+ * success. Otherwise the lock is released on failure.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int clk_pm_runtime_get_all(void)
+{
+ int ret;
+ struct clk_core *core, *failed;
+
+ /*
+ * Grab the list lock to prevent any new clks from being registered
+ * or unregistered until clk_pm_runtime_put_all().
+ */
+ mutex_lock(&clk_rpm_list_lock);
+
+ /*
+ * Runtime PM "get" all the devices that are needed for the clks
+ * currently registered. Do this without holding the prepare_lock, to
+ * avoid the deadlock.
+ */
+ hlist_for_each_entry(core, &clk_rpm_list, rpm_node) {
+ ret = clk_pm_runtime_get(core);
+ if (ret) {
+ failed = core;
+ pr_err("clk: Failed to runtime PM get '%s' for clk '%s'\n",
+ dev_name(failed->dev), failed->name);
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ hlist_for_each_entry(core, &clk_rpm_list, rpm_node) {
+ if (core == failed)
+ break;
+
+ clk_pm_runtime_put(core);
+ }
+ mutex_unlock(&clk_rpm_list_lock);
+
+ return ret;
+}
+
+/**
+ * clk_pm_runtime_put_all() - Runtime "put" all clk provider devices
+ *
+ * Put the runtime PM references taken in clk_pm_runtime_get_all() and release
+ * the 'clk_rpm_list_lock'.
+ */
+static void clk_pm_runtime_put_all(void)
+{
+ struct clk_core *core;
+
+ hlist_for_each_entry(core, &clk_rpm_list, rpm_node)
+ clk_pm_runtime_put(core);
+ mutex_unlock(&clk_rpm_list_lock);
+}
+
+static void clk_pm_runtime_init(struct clk_core *core)
+{
+ struct device *dev = core->dev;
+
+ if (dev && pm_runtime_enabled(dev)) {
+ core->rpm_enabled = true;
+
+ mutex_lock(&clk_rpm_list_lock);
+ hlist_add_head(&core->rpm_node, &clk_rpm_list);
+ mutex_unlock(&clk_rpm_list_lock);
+ }
+}
+
/*** locking ***/
static void clk_prepare_lock(void)
{
@@ -1362,9 +1450,6 @@ static void __init clk_unprepare_unused_subtree(struct clk_core *core)
if (core->flags & CLK_IGNORE_UNUSED)
return;
- if (clk_pm_runtime_get(core))
- return;
-
if (clk_core_is_prepared(core)) {
trace_clk_unprepare(core);
if (core->ops->unprepare_unused)
@@ -1373,8 +1458,6 @@ static void __init clk_unprepare_unused_subtree(struct clk_core *core)
core->ops->unprepare(core->hw);
trace_clk_unprepare_complete(core);
}
-
- clk_pm_runtime_put(core);
}
static void __init clk_disable_unused_subtree(struct clk_core *core)
@@ -1390,9 +1473,6 @@ static void __init clk_disable_unused_subtree(struct clk_core *core)
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(core->parent);
- if (clk_pm_runtime_get(core))
- goto unprepare_out;
-
flags = clk_enable_lock();
if (core->enable_count)
@@ -1417,8 +1497,6 @@ static void __init clk_disable_unused_subtree(struct clk_core *core)
unlock_out:
clk_enable_unlock(flags);
- clk_pm_runtime_put(core);
-unprepare_out:
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(core->parent);
}
@@ -1434,6 +1512,7 @@ __setup("clk_ignore_unused", clk_ignore_unused_setup);
static int __init clk_disable_unused(void)
{
struct clk_core *core;
+ int ret;
if (clk_ignore_unused) {
pr_warn("clk: Not disabling unused clocks\n");
@@ -1442,6 +1521,13 @@ static int __init clk_disable_unused(void)
pr_info("clk: Disabling unused clocks\n");
+ ret = clk_pm_runtime_get_all();
+ if (ret)
+ return ret;
+ /*
+ * Grab the prepare lock to keep the clk topology stable while iterating
+ * over clks.
+ */
clk_prepare_lock();
hlist_for_each_entry(core, &clk_root_list, child_node)
@@ -1458,6 +1544,8 @@ static int __init clk_disable_unused(void)
clk_prepare_unlock();
+ clk_pm_runtime_put_all();
+
return 0;
}
late_initcall_sync(clk_disable_unused);
@@ -4152,6 +4240,12 @@ static void __clk_release(struct kref *ref)
{
struct clk_core *core = container_of(ref, struct clk_core, ref);
+ if (core->rpm_enabled) {
+ mutex_lock(&clk_rpm_list_lock);
+ hlist_del(&core->rpm_node);
+ mutex_unlock(&clk_rpm_list_lock);
+ }
+
clk_core_free_parent_map(core);
kfree_const(core->name);
kfree(core);
@@ -4191,9 +4285,8 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
}
core->ops = init->ops;
- if (dev && pm_runtime_enabled(dev))
- core->rpm_enabled = true;
core->dev = dev;
+ clk_pm_runtime_init(core);
core->of_node = np;
if (dev && dev->driver)
core->owner = dev->driver->owner;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 094/158] clk: Show active consumers of clocks in debugfs
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 093/158] clk: Get runtime PM before walking tree during disable_unused Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 095/158] clk: Get runtime PM before walking tree for clk_summary Greg Kroah-Hartman
` (72 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Chinmoy Ghosh, Mintu Patel,
Vimal Kumar, Vishal Badole, Stephen Boyd, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vishal Badole <badolevishal1116@gmail.com>
[ Upstream commit dcce5cc7826e9c6b3a2443e5e6b7f8d02a103c35 ]
This feature lists the clock consumer's name and respective connection
id. Using this feature user can easily check that which user has
acquired and enabled a particular clock.
Usage:
>> cat /sys/kernel/debug/clk/clk_summary
enable prepare protect
duty hardware Connection
clock count count count rate accuracy phase cycle enable consumer Id
------------------------------------------------------------------------------------------------------------------------------
clk_mcasp0_fixed 0 0 0 24576000 0 0 50000 Y deviceless of_clk_get_from_provider
deviceless no_connection_id
clk_mcasp0 0 0 0 24576000 0 0 50000 N simple-audio-card,cpu no_connection_id
deviceless no_connection_id
Co-developed-by: Chinmoy Ghosh <chinmoyghosh2001@gmail.com>
Signed-off-by: Chinmoy Ghosh <chinmoyghosh2001@gmail.com>
Co-developed-by: Mintu Patel <mintupatel89@gmail.com>
Signed-off-by: Mintu Patel <mintupatel89@gmail.com>
Co-developed-by: Vimal Kumar <vimal.kumar32@gmail.com>
Signed-off-by: Vimal Kumar <vimal.kumar32@gmail.com>
Signed-off-by: Vishal Badole <badolevishal1116@gmail.com>
Link: https://lore.kernel.org/r/1669569799-8526-1-git-send-email-badolevishal1116@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 9d1e795f754d ("clk: Get runtime PM before walking tree for clk_summary")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 7c87a8084df76..011e7632541fa 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3279,28 +3279,41 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
int level)
{
int phase;
+ struct clk *clk_user;
+ int multi_node = 0;
- seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
+ seq_printf(s, "%*s%-*s %-7d %-8d %-8d %-11lu %-10lu ",
level * 3 + 1, "",
- 30 - level * 3, c->name,
+ 35 - level * 3, c->name,
c->enable_count, c->prepare_count, c->protect_count,
clk_core_get_rate_recalc(c),
clk_core_get_accuracy_recalc(c));
phase = clk_core_get_phase(c);
if (phase >= 0)
- seq_printf(s, "%5d", phase);
+ seq_printf(s, "%-5d", phase);
else
seq_puts(s, "-----");
- seq_printf(s, " %6d", clk_core_get_scaled_duty_cycle(c, 100000));
+ seq_printf(s, " %-6d", clk_core_get_scaled_duty_cycle(c, 100000));
if (c->ops->is_enabled)
- seq_printf(s, " %9c\n", clk_core_is_enabled(c) ? 'Y' : 'N');
+ seq_printf(s, " %5c ", clk_core_is_enabled(c) ? 'Y' : 'N');
else if (!c->ops->enable)
- seq_printf(s, " %9c\n", 'Y');
+ seq_printf(s, " %5c ", 'Y');
else
- seq_printf(s, " %9c\n", '?');
+ seq_printf(s, " %5c ", '?');
+
+ hlist_for_each_entry(clk_user, &c->clks, clks_node) {
+ seq_printf(s, "%*s%-*s %-25s\n",
+ level * 3 + 2 + 105 * multi_node, "",
+ 30,
+ clk_user->dev_id ? clk_user->dev_id : "deviceless",
+ clk_user->con_id ? clk_user->con_id : "no_connection_id");
+
+ multi_node = 1;
+ }
+
}
static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -3321,9 +3334,10 @@ static int clk_summary_show(struct seq_file *s, void *data)
struct clk_core *c;
struct hlist_head **lists = s->private;
- seq_puts(s, " enable prepare protect duty hardware\n");
- seq_puts(s, " clock count count count rate accuracy phase cycle enable\n");
- seq_puts(s, "-------------------------------------------------------------------------------------------------------\n");
+ seq_puts(s, " enable prepare protect duty hardware connection\n");
+ seq_puts(s, " clock count count count rate accuracy phase cycle enable consumer id\n");
+ seq_puts(s, "---------------------------------------------------------------------------------------------------------------------------------------------\n");
+
clk_prepare_lock();
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 095/158] clk: Get runtime PM before walking tree for clk_summary
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 094/158] clk: Show active consumers of clocks in debugfs Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 096/158] clk: mediatek: Do a runtime PM get on controllers during probe Greg Kroah-Hartman
` (71 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Taniya Das, Douglas Anderson,
Stephen Boyd, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Boyd <sboyd@kernel.org>
[ Upstream commit 9d1e795f754db1ac3344528b7af0b17b8146f321 ]
Similar to the previous commit, we should make sure that all devices are
runtime resumed before printing the clk_summary through debugfs. Failure
to do so would result in a deadlock if the thread is resuming a device
to print clk state and that device is also runtime resuming in another
thread, e.g the screen is turning on and the display driver is starting
up. We remove the calls to clk_pm_runtime_{get,put}() in this path
because they're superfluous now that we know the devices are runtime
resumed. This also squashes a bug where the return value of
clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow
on error paths.
Fixes: 1bb294a7981c ("clk: Enable/Disable runtime PM for clk_summary")
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-6-sboyd@kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/clk.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 011e7632541fa..4a67c0d4823cf 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3321,9 +3321,7 @@ static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
{
struct clk_core *child;
- clk_pm_runtime_get(c);
clk_summary_show_one(s, c, level);
- clk_pm_runtime_put(c);
hlist_for_each_entry(child, &c->children, child_node)
clk_summary_show_subtree(s, child, level + 1);
@@ -3333,11 +3331,15 @@ static int clk_summary_show(struct seq_file *s, void *data)
{
struct clk_core *c;
struct hlist_head **lists = s->private;
+ int ret;
seq_puts(s, " enable prepare protect duty hardware connection\n");
seq_puts(s, " clock count count count rate accuracy phase cycle enable consumer id\n");
seq_puts(s, "---------------------------------------------------------------------------------------------------------------------------------------------\n");
+ ret = clk_pm_runtime_get_all();
+ if (ret)
+ return ret;
clk_prepare_lock();
@@ -3346,6 +3348,7 @@ static int clk_summary_show(struct seq_file *s, void *data)
clk_summary_show_subtree(s, c, 0);
clk_prepare_unlock();
+ clk_pm_runtime_put_all();
return 0;
}
@@ -3393,8 +3396,14 @@ static int clk_dump_show(struct seq_file *s, void *data)
struct clk_core *c;
bool first_node = true;
struct hlist_head **lists = s->private;
+ int ret;
+
+ ret = clk_pm_runtime_get_all();
+ if (ret)
+ return ret;
seq_putc(s, '{');
+
clk_prepare_lock();
for (; *lists; lists++) {
@@ -3407,6 +3416,7 @@ static int clk_dump_show(struct seq_file *s, void *data)
}
clk_prepare_unlock();
+ clk_pm_runtime_put_all();
seq_puts(s, "}\n");
return 0;
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 096/158] clk: mediatek: Do a runtime PM get on controllers during probe
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 095/158] clk: Get runtime PM before walking tree for clk_summary Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 097/158] x86/bugs: Fix BHI retpoline check Greg Kroah-Hartman
` (70 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Pin-yen Lin,
AngeloGioacchino Del Regno, Stephen Boyd, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pin-yen Lin <treapking@chromium.org>
[ Upstream commit 2f7b1d8b5505efb0057cd1ab85fca206063ea4c3 ]
mt8183-mfgcfg has a mutual dependency with genpd during the probing
stage, which leads to a deadlock in the following call stack:
CPU0: genpd_lock --> clk_prepare_lock
genpd_power_off_work_fn()
genpd_lock()
generic_pm_domain::power_off()
clk_unprepare()
clk_prepare_lock()
CPU1: clk_prepare_lock --> genpd_lock
clk_register()
__clk_core_init()
clk_prepare_lock()
clk_pm_runtime_get()
genpd_lock()
Do a runtime PM get at the probe function to make sure clk_register()
won't acquire the genpd lock. Instead of only modifying mt8183-mfgcfg,
do this on all mediatek clock controller probings because we don't
believe this would cause any regression.
Verified on MT8183 and MT8192 Chromebooks.
Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Link: https://lore.kernel.org/r/20240312115249.3341654-1-treapking@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/mediatek/clk-mtk.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index 2e55368dc4d82..bd37ab4d1a9bb 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -13,6 +13,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include "clk-mtk.h"
@@ -494,6 +495,16 @@ static int __mtk_clk_simple_probe(struct platform_device *pdev,
return IS_ERR(base) ? PTR_ERR(base) : -ENOMEM;
}
+
+ devm_pm_runtime_enable(&pdev->dev);
+ /*
+ * Do a pm_runtime_resume_and_get() to workaround a possible
+ * deadlock between clk_register() and the genpd framework.
+ */
+ r = pm_runtime_resume_and_get(&pdev->dev);
+ if (r)
+ return r;
+
/* Calculate how many clk_hw_onecell_data entries to allocate */
num_clks = mcd->num_clks + mcd->num_composite_clks;
num_clks += mcd->num_fixed_clks + mcd->num_factor_clks;
@@ -574,6 +585,8 @@ static int __mtk_clk_simple_probe(struct platform_device *pdev,
goto unregister_clks;
}
+ pm_runtime_put(&pdev->dev);
+
return r;
unregister_clks:
@@ -604,6 +617,8 @@ static int __mtk_clk_simple_probe(struct platform_device *pdev,
free_base:
if (mcd->shared_io && base)
iounmap(base);
+
+ pm_runtime_put(&pdev->dev);
return r;
}
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 097/158] x86/bugs: Fix BHI retpoline check
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 096/158] clk: mediatek: Do a runtime PM get on controllers during probe Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 098/158] x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ Greg Kroah-Hartman
` (69 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Josh Poimboeuf, Ingo Molnar,
Pawan Gupta, Borislav Petkov, Linus Torvalds, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <jpoimboe@kernel.org>
[ Upstream commit 69129794d94c544810e68b2b4eaa7e44063f9bf2 ]
Confusingly, X86_FEATURE_RETPOLINE doesn't mean retpolines are enabled,
as it also includes the original "AMD retpoline" which isn't a retpoline
at all.
Also replace cpu_feature_enabled() with boot_cpu_has() because this is
before alternatives are patched and cpu_feature_enabled()'s fallback
path is slower than plain old boot_cpu_has().
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/ad3807424a3953f0323c011a643405619f2a4927.1712944776.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/cpu/bugs.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 5ff69b1d39b20..c2dc9b7426acb 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -1651,7 +1651,8 @@ static void __init bhi_select_mitigation(void)
return;
/* Retpoline mitigates against BHI unless the CPU has RRSBA behavior */
- if (cpu_feature_enabled(X86_FEATURE_RETPOLINE)) {
+ if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
+ !boot_cpu_has(X86_FEATURE_RETPOLINE_LFENCE)) {
spec_ctrl_disable_kernel_rrsba();
if (rrsba_disabled)
return;
@@ -2803,11 +2804,13 @@ static const char *spectre_bhi_state(void)
{
if (!boot_cpu_has_bug(X86_BUG_BHI))
return "; BHI: Not affected";
- else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_HW))
+ else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_HW))
return "; BHI: BHI_DIS_S";
- else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
+ else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
return "; BHI: SW loop, KVM: SW loop";
- else if (boot_cpu_has(X86_FEATURE_RETPOLINE) && rrsba_disabled)
+ else if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
+ !boot_cpu_has(X86_FEATURE_RETPOLINE_LFENCE) &&
+ rrsba_disabled)
return "; BHI: Retpoline";
else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
return "; BHI: Vulnerable, KVM: SW loop";
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 098/158] x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 097/158] x86/bugs: Fix BHI retpoline check Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 099/158] net/mlx5: E-switch, store eswitch pointer before registering devlink_param Greg Kroah-Hartman
` (68 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Eric Biggers, Borislav Petkov (AMD),
Dave Hansen, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <ebiggers@google.com>
[ Upstream commit 9543f6e26634537997b6e909c20911b7bf4876de ]
Fix cpuid_deps[] to list the correct dependencies for GFNI, VAES, and
VPCLMULQDQ. These features don't depend on AVX512, and there exist CPUs
that support these features but not AVX512. GFNI actually doesn't even
depend on AVX.
This prevents GFNI from being unnecessarily disabled if AVX is disabled
to mitigate the GDS vulnerability.
This also prevents all three features from being unnecessarily disabled
if AVX512VL (or its dependency AVX512F) were to be disabled, but it
looks like there isn't any case where this happens anyway.
Fixes: c128dbfa0f87 ("x86/cpufeatures: Enable new SSE/AVX/AVX512 CPU features")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240417060434.47101-1-ebiggers@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/kernel/cpu/cpuid-deps.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/cpuid-deps.c b/arch/x86/kernel/cpu/cpuid-deps.c
index e462c1d3800a6..6fb6d8a57ceca 100644
--- a/arch/x86/kernel/cpu/cpuid-deps.c
+++ b/arch/x86/kernel/cpu/cpuid-deps.c
@@ -44,7 +44,10 @@ static const struct cpuid_dep cpuid_deps[] = {
{ X86_FEATURE_F16C, X86_FEATURE_XMM2, },
{ X86_FEATURE_AES, X86_FEATURE_XMM2 },
{ X86_FEATURE_SHA_NI, X86_FEATURE_XMM2 },
+ { X86_FEATURE_GFNI, X86_FEATURE_XMM2 },
{ X86_FEATURE_FMA, X86_FEATURE_AVX },
+ { X86_FEATURE_VAES, X86_FEATURE_AVX },
+ { X86_FEATURE_VPCLMULQDQ, X86_FEATURE_AVX },
{ X86_FEATURE_AVX2, X86_FEATURE_AVX, },
{ X86_FEATURE_AVX512F, X86_FEATURE_AVX, },
{ X86_FEATURE_AVX512IFMA, X86_FEATURE_AVX512F },
@@ -56,9 +59,6 @@ static const struct cpuid_dep cpuid_deps[] = {
{ X86_FEATURE_AVX512VL, X86_FEATURE_AVX512F },
{ X86_FEATURE_AVX512VBMI, X86_FEATURE_AVX512F },
{ X86_FEATURE_AVX512_VBMI2, X86_FEATURE_AVX512VL },
- { X86_FEATURE_GFNI, X86_FEATURE_AVX512VL },
- { X86_FEATURE_VAES, X86_FEATURE_AVX512VL },
- { X86_FEATURE_VPCLMULQDQ, X86_FEATURE_AVX512VL },
{ X86_FEATURE_AVX512_VNNI, X86_FEATURE_AVX512VL },
{ X86_FEATURE_AVX512_BITALG, X86_FEATURE_AVX512VL },
{ X86_FEATURE_AVX512_4VNNIW, X86_FEATURE_AVX512F },
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 099/158] net/mlx5: E-switch, store eswitch pointer before registering devlink_param
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 098/158] x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 100/158] ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages Greg Kroah-Hartman
` (67 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Shay Drory, Moshe Shemesh,
Saeed Mahameed, Tariq Toukan, Jakub Kicinski, Sasha Levin
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shay Drory <shayd@nvidia.com>
[ Upstream commit 0553e753ea9ee724acaf6b3dfc7354702af83567 ]
Next patch will move devlink register to be first. Therefore, whenever
mlx5 will register a param, the user will be notified.
In order to notify the user, devlink is using the get() callback of
the param. Hence, resources that are being used by the get() callback
must be set before the devlink param is registered.
Therefore, store eswitch pointer inside mdev before registering the
param.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240409190820.227554-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 9 +++------
.../net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ++++
2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 3047d7015c525..1789800faaeb6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1868,6 +1868,7 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev)
if (err)
goto abort;
+ dev->priv.eswitch = esw;
err = esw_offloads_init(esw);
if (err)
goto reps_err;
@@ -1892,11 +1893,6 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev)
esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
else
esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
- if (MLX5_ESWITCH_MANAGER(dev) &&
- mlx5_esw_vport_match_metadata_supported(esw))
- esw->flags |= MLX5_ESWITCH_VPORT_MATCH_METADATA;
-
- dev->priv.eswitch = esw;
BLOCKING_INIT_NOTIFIER_HEAD(&esw->n_head);
esw_info(dev,
@@ -1908,6 +1904,7 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev)
reps_err:
mlx5_esw_vports_cleanup(esw);
+ dev->priv.eswitch = NULL;
abort:
if (esw->work_queue)
destroy_workqueue(esw->work_queue);
@@ -1926,7 +1923,6 @@ void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw)
esw_info(esw->dev, "cleanup\n");
- esw->dev->priv.eswitch = NULL;
destroy_workqueue(esw->work_queue);
WARN_ON(refcount_read(&esw->qos.refcnt));
mutex_destroy(&esw->state_lock);
@@ -1937,6 +1933,7 @@ void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw)
mutex_destroy(&esw->offloads.encap_tbl_lock);
mutex_destroy(&esw->offloads.decap_tbl_lock);
esw_offloads_cleanup(esw);
+ esw->dev->priv.eswitch = NULL;
mlx5_esw_vports_cleanup(esw);
debugfs_remove_recursive(esw->debugfs_root);
devl_params_unregister(priv_to_devlink(esw->dev), mlx5_eswitch_params,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index baaae628b0a0f..e3cce110e52fd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -2476,6 +2476,10 @@ int esw_offloads_init(struct mlx5_eswitch *esw)
if (err)
return err;
+ if (MLX5_ESWITCH_MANAGER(esw->dev) &&
+ mlx5_esw_vport_match_metadata_supported(esw))
+ esw->flags |= MLX5_ESWITCH_VPORT_MATCH_METADATA;
+
err = devl_params_register(priv_to_devlink(esw->dev),
esw_devlink_params,
ARRAY_SIZE(esw_devlink_params));
--
2.43.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 100/158] ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 099/158] net/mlx5: E-switch, store eswitch pointer before registering devlink_param Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 101/158] ALSA: hda/tas2781: correct the register for pow calibrated data Greg Kroah-Hartman
` (66 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Takashi Iwai
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit f25f17dc5c6a5e3f2014d44635f0c0db45224efe upstream.
The conversion from MIDI2 to MIDI1 UMP messages had a leftover
artifact (superfluous bit shift), and this resulted in the bogus type
check, leading to empty outputs. Let's fix it.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://github.com/alsa-project/alsa-utils/issues/262
Message-ID: <20240419100442.14806-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/seq/seq_ump_convert.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/core/seq/seq_ump_convert.c b/sound/core/seq/seq_ump_convert.c
index b141024830ec..ee6ac649df83 100644
--- a/sound/core/seq/seq_ump_convert.c
+++ b/sound/core/seq/seq_ump_convert.c
@@ -428,7 +428,7 @@ static int cvt_ump_midi2_to_midi1(struct snd_seq_client *dest,
midi1->note.group = midi2->note.group;
midi1->note.status = midi2->note.status;
midi1->note.channel = midi2->note.channel;
- switch (midi2->note.status << 4) {
+ switch (midi2->note.status) {
case UMP_MSG_STATUS_NOTE_ON:
case UMP_MSG_STATUS_NOTE_OFF:
midi1->note.note = midi2->note.note;
--
2.44.0
^ permalink raw reply related [flat|nested] 171+ messages in thread
* [PATCH 6.6 101/158] ALSA: hda/tas2781: correct the register for pow calibrated data
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 100/158] ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 102/158] ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1 Greg Kroah-Hartman
` (65 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Shenghao Ding, Takashi Iwai
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shenghao Ding <shenghao-ding@ti.com>
commit 0b6f0ff01a4a8c1b66c600263465976d57dcc1a3 upstream.
Calibrated data was written into an incorrect register, which cause
speaker protection sometimes malfuctions
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Cc: <stable@vger.kernel.org>
Message-ID: <20240406132010.341-1-shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/tas2781_hda_i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -420,10 +420,10 @@ static const struct snd_kcontrol_new tas
static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
{
static const unsigned char page_array[CALIB_MAX] = {
- 0x17, 0x18, 0x18, 0x0d, 0x18
+ 0x17, 0x18, 0x18, 0x13, 0x18,
};
static const unsigned char rgno_array[CALIB_MAX] = {
- 0x74, 0x0c, 0x14, 0x3c, 0x7c
+ 0x74, 0x0c, 0x14, 0x70, 0x7c,
};
unsigned char *data;
int i, j, rc;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 102/158] ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 101/158] ALSA: hda/tas2781: correct the register for pow calibrated data Greg Kroah-Hartman
@ 2024-04-23 21:38 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 103/158] ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N Greg Kroah-Hartman
` (64 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:38 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Shenghao Ding, Takashi Iwai
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shenghao Ding <shenghao-ding@ti.com>
commit f74ab0c5e5947bcb3a400ab73d837974e76fad23 upstream.
Add new vendor_id and subsystem_id to support new Lenovo laptop
ThinkPad ICE-1
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Cc: <stable@vger.kernel.org>
Message-ID: <20240411091823.1644-1-shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10203,6 +10203,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x222e, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2231, "Thinkpad T560", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x2233, "Thinkpad", ALC292_FIXUP_TPT460),
+ SND_PCI_QUIRK(0x17aa, 0x2234, "Thinkpad ICE-1", ALC287_FIXUP_TAS2781_I2C),
SND_PCI_QUIRK(0x17aa, 0x2245, "Thinkpad T470", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2246, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2247, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 103/158] ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2024-04-23 21:38 ` [PATCH 6.6 102/158] ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1 Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 104/158] ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC Greg Kroah-Hartman
` (63 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Mauro Carvalho Chehab, Takashi Iwai
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <mchehab@kernel.org>
commit 7caf3daaaf0436fe370834c72c667a97d3671d1a upstream.
The headset mic requires a fixup to be properly detected/used.
As a reference, this specific model from 2021 reports
the following devices:
https://alsa-project.org/db/?f=1a5ddeb0b151db8fe051407f5bb1c075b7dd3e4a
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <stable@vger.kernel.org>
Message-ID: <b92a9e49fb504eec8416bcc6882a52de89450102.1713370457.git.mchehab@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10098,6 +10098,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x152d, 0x1082, "Quanta NL3", ALC269_FIXUP_LIFEBOOK),
+ SND_PCI_QUIRK(0x152d, 0x1262, "Huawei NBLB-WAX9N", ALC2XX_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1558, 0x0353, "Clevo V35[05]SN[CDE]Q", ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x1323, "Clevo N130ZU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1558, 0x1325, "Clevo N15[01][CW]U", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 104/158] ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 103/158] ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 105/158] binder: check offset alignment in binder_get_object() Greg Kroah-Hartman
` (62 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Ai Chao, Takashi Iwai
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ai Chao <aichao@kylinos.cn>
commit 7ee5faad0f8c3ad86c8cfc2f6aac91d2ba29790f upstream.
The Haier Boyue G42 with ALC269VC cannot detect the MIC of headset,
the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Message-ID: <20240419082159.476879-1-aichao@kylinos.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10317,6 +10317,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1d05, 0x115c, "TongFang GMxTGxx", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x1d05, 0x121b, "TongFang GMxAGxx", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x1d05, 0x1387, "TongFang GMxIXxx", ALC2XX_FIXUP_HEADSET_MIC),
+ SND_PCI_QUIRK(0x1d17, 0x3288, "Haier Boyue G42", ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS),
SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC),
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 105/158] binder: check offset alignment in binder_get_object()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 104/158] ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 106/158] thunderbolt: Avoid notify PM core about runtime PM resume Greg Kroah-Hartman
` (61 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Carlos Llamas, Todd Kjos
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Carlos Llamas <cmllamas@google.com>
commit aaef73821a3b0194a01bd23ca77774f704a04d40 upstream.
Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying
txn") introduced changes to how binder objects are copied. In doing so,
it unintentionally removed an offset alignment check done through calls
to binder_alloc_copy_from_buffer() -> check_buffer().
These calls were replaced in binder_get_object() with copy_from_user(),
so now an explicit offset alignment check is needed here. This avoids
later complications when unwinding the objects gets harder.
It is worth noting this check existed prior to commit 7a67a39320df
("binder: add function to copy binder object from buffer"), likely
removed due to redundancy at the time.
Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240330190115.1877819-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/android/binder.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1708,8 +1708,10 @@ static size_t binder_get_object(struct b
size_t object_size = 0;
read_size = min_t(size_t, sizeof(*object), buffer->data_size - offset);
- if (offset > buffer->data_size || read_size < sizeof(*hdr))
+ if (offset > buffer->data_size || read_size < sizeof(*hdr) ||
+ !IS_ALIGNED(offset, sizeof(u32)))
return 0;
+
if (u) {
if (copy_from_user(object, u + offset, read_size))
return 0;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 106/158] thunderbolt: Avoid notify PM core about runtime PM resume
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 105/158] binder: check offset alignment in binder_get_object() Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 107/158] thunderbolt: Fix wake configurations after device unplug Greg Kroah-Hartman
` (60 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gil Fine, Mika Westerberg
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gil Fine <gil.fine@linux.intel.com>
commit dcd12acaf384c30437fa5a9a1f71df06fc9835fd upstream.
Currently we notify PM core about occurred wakes after any resume. This
is not actually needed after resume from runtime suspend. Hence, notify
PM core about occurred wakes only after resume from system sleep. Also,
if the wake occurred in USB4 router upstream port, we don't notify the
PM core about it since it is not actually needed and can cause
unexpected autowake (e.g. if /sys/power/wakeup_count is used).
While there add the missing kernel-doc for tb_switch_resume().
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/switch.c | 27 +++++++++++++++++++++++++--
drivers/thunderbolt/tb.c | 4 ++--
drivers/thunderbolt/tb.h | 3 ++-
drivers/thunderbolt/usb4.c | 13 +++++++------
4 files changed, 36 insertions(+), 11 deletions(-)
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3208,7 +3208,26 @@ static int tb_switch_set_wake(struct tb_
return tb_lc_set_wake(sw, flags);
}
-int tb_switch_resume(struct tb_switch *sw)
+static void tb_switch_check_wakes(struct tb_switch *sw)
+{
+ if (device_may_wakeup(&sw->dev)) {
+ if (tb_switch_is_usb4(sw))
+ usb4_switch_check_wakes(sw);
+ }
+}
+
+/**
+ * tb_switch_resume() - Resume a switch after sleep
+ * @sw: Switch to resume
+ * @runtime: Is this resume from runtime suspend or system sleep
+ *
+ * Resumes and re-enumerates router (and all its children), if still plugged
+ * after suspend. Don't enumerate device router whose UID was changed during
+ * suspend. If this is resume from system sleep, notifies PM core about the
+ * wakes occurred during suspend. Disables all wakes, except USB4 wake of
+ * upstream port for USB4 routers that shall be always enabled.
+ */
+int tb_switch_resume(struct tb_switch *sw, bool runtime)
{
struct tb_port *port;
int err;
@@ -3257,6 +3276,9 @@ int tb_switch_resume(struct tb_switch *s
if (err)
return err;
+ if (!runtime)
+ tb_switch_check_wakes(sw);
+
/* Disable wakes */
tb_switch_set_wake(sw, 0);
@@ -3286,7 +3308,8 @@ int tb_switch_resume(struct tb_switch *s
*/
if (tb_port_unlock(port))
tb_port_warn(port, "failed to unlock port\n");
- if (port->remote && tb_switch_resume(port->remote->sw)) {
+ if (port->remote &&
+ tb_switch_resume(port->remote->sw, runtime)) {
tb_port_warn(port,
"lost during suspend, disconnecting\n");
tb_sw_set_unplugged(port->remote->sw);
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -2262,7 +2262,7 @@ static int tb_resume_noirq(struct tb *tb
/* remove any pci devices the firmware might have setup */
tb_switch_reset(tb->root_switch);
- tb_switch_resume(tb->root_switch);
+ tb_switch_resume(tb->root_switch, false);
tb_free_invalid_tunnels(tb);
tb_free_unplugged_children(tb->root_switch);
tb_restore_children(tb->root_switch);
@@ -2388,7 +2388,7 @@ static int tb_runtime_resume(struct tb *
struct tb_tunnel *tunnel, *n;
mutex_lock(&tb->lock);
- tb_switch_resume(tb->root_switch);
+ tb_switch_resume(tb->root_switch, true);
tb_free_invalid_tunnels(tb);
tb_restore_children(tb->root_switch);
list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list)
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -802,7 +802,7 @@ int tb_switch_configuration_valid(struct
int tb_switch_add(struct tb_switch *sw);
void tb_switch_remove(struct tb_switch *sw);
void tb_switch_suspend(struct tb_switch *sw, bool runtime);
-int tb_switch_resume(struct tb_switch *sw);
+int tb_switch_resume(struct tb_switch *sw, bool runtime);
int tb_switch_reset(struct tb_switch *sw);
int tb_switch_wait_for_bit(struct tb_switch *sw, u32 offset, u32 bit,
u32 value, int timeout_msec);
@@ -1224,6 +1224,7 @@ static inline bool tb_switch_is_usb4(con
return usb4_switch_version(sw) > 0;
}
+void usb4_switch_check_wakes(struct tb_switch *sw);
int usb4_switch_setup(struct tb_switch *sw);
int usb4_switch_configuration_valid(struct tb_switch *sw);
int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid);
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -155,7 +155,13 @@ static inline int usb4_switch_op_data(st
tx_dwords, rx_data, rx_dwords);
}
-static void usb4_switch_check_wakes(struct tb_switch *sw)
+/**
+ * usb4_switch_check_wakes() - Check for wakes and notify PM core about them
+ * @sw: Router whose wakes to check
+ *
+ * Checks wakes occurred during suspend and notify the PM core about them.
+ */
+void usb4_switch_check_wakes(struct tb_switch *sw)
{
bool wakeup_usb4 = false;
struct usb4_port *usb4;
@@ -163,9 +169,6 @@ static void usb4_switch_check_wakes(stru
bool wakeup = false;
u32 val;
- if (!device_may_wakeup(&sw->dev))
- return;
-
if (tb_route(sw)) {
if (tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1))
return;
@@ -244,8 +247,6 @@ int usb4_switch_setup(struct tb_switch *
u32 val = 0;
int ret;
- usb4_switch_check_wakes(sw);
-
if (!tb_route(sw))
return 0;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 107/158] thunderbolt: Fix wake configurations after device unplug
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 106/158] thunderbolt: Avoid notify PM core about runtime PM resume Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 108/158] comedi: vmk80xx: fix incomplete endpoint checking Greg Kroah-Hartman
` (59 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Gil Fine, Mika Westerberg
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gil Fine <gil.fine@linux.intel.com>
commit c38fa07dc69f0b9e6f43ecab96dc7861a70c827c upstream.
Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/switch.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2949,22 +2949,29 @@ void tb_switch_unconfigure_link(struct t
{
struct tb_port *up, *down;
- if (sw->is_unplugged)
- return;
if (!tb_route(sw) || tb_switch_is_icm(sw))
return;
+ /*
+ * Unconfigure downstream port so that wake-on-connect can be
+ * configured after router unplug. No need to unconfigure upstream port
+ * since its router is unplugged.
+ */
up = tb_upstream_port(sw);
- if (tb_switch_is_usb4(up->sw))
- usb4_port_unconfigure(up);
- else
- tb_lc_unconfigure_port(up);
-
down = up->remote;
if (tb_switch_is_usb4(down->sw))
usb4_port_unconfigure(down);
else
tb_lc_unconfigure_port(down);
+
+ if (sw->is_unplugged)
+ return;
+
+ up = tb_upstream_port(sw);
+ if (tb_switch_is_usb4(up->sw))
+ usb4_port_unconfigure(up);
+ else
+ tb_lc_unconfigure_port(up);
}
static void tb_switch_credits_init(struct tb_switch *sw)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 108/158] comedi: vmk80xx: fix incomplete endpoint checking
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 107/158] thunderbolt: Fix wake configurations after device unplug Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 109/158] serial: mxs-auart: add spinlock around changing cts state Greg Kroah-Hartman
` (58 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, stable, Ian Abbott,
Nikita Zhandarovich, syzbot+5f29dc6a889fc42bd896
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
commit d1718530e3f640b7d5f0050e725216eab57a85d8 upstream.
While vmk80xx does have endpoint checking implemented, some things
can fall through the cracks. Depending on the hardware model,
URBs can have either bulk or interrupt type, and current version
of vmk80xx_find_usb_endpoints() function does not take that fully
into account. While this warning does not seem to be too harmful,
at the very least it will crash systems with 'panic_on_warn' set on
them.
Fix the issue found by Syzkaller [1] by somewhat simplifying the
endpoint checking process with usb_find_common_endpoints() and
ensuring that only expected endpoint types are present.
This patch has not been tested on real hardware.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59
vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline]
vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818
comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067
usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399
...
Similar issue also found by Syzkaller:
Link: https://syzkaller.appspot.com/bug?extid=5205eb2f17de3e01946e
Reported-and-tested-by: syzbot+5f29dc6a889fc42bd896@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Fixes: 49253d542cc0 ("staging: comedi: vmk80xx: factor out usb endpoint detection")
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240408171633.31649-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/comedi/drivers/vmk80xx.c | 35 ++++++++++++-----------------------
1 file changed, 12 insertions(+), 23 deletions(-)
--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -641,33 +641,22 @@ static int vmk80xx_find_usb_endpoints(st
struct vmk80xx_private *devpriv = dev->private;
struct usb_interface *intf = comedi_to_usb_interface(dev);
struct usb_host_interface *iface_desc = intf->cur_altsetting;
- struct usb_endpoint_descriptor *ep_desc;
- int i;
+ struct usb_endpoint_descriptor *ep_rx_desc, *ep_tx_desc;
+ int ret;
- if (iface_desc->desc.bNumEndpoints != 2)
- return -ENODEV;
-
- for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
- ep_desc = &iface_desc->endpoint[i].desc;
-
- if (usb_endpoint_is_int_in(ep_desc) ||
- usb_endpoint_is_bulk_in(ep_desc)) {
- if (!devpriv->ep_rx)
- devpriv->ep_rx = ep_desc;
- continue;
- }
+ if (devpriv->model == VMK8061_MODEL)
+ ret = usb_find_common_endpoints(iface_desc, &ep_rx_desc,
+ &ep_tx_desc, NULL, NULL);
+ else
+ ret = usb_find_common_endpoints(iface_desc, NULL, NULL,
+ &ep_rx_desc, &ep_tx_desc);
- if (usb_endpoint_is_int_out(ep_desc) ||
- usb_endpoint_is_bulk_out(ep_desc)) {
- if (!devpriv->ep_tx)
- devpriv->ep_tx = ep_desc;
- continue;
- }
- }
-
- if (!devpriv->ep_rx || !devpriv->ep_tx)
+ if (ret)
return -ENODEV;
+ devpriv->ep_rx = ep_rx_desc;
+ devpriv->ep_tx = ep_tx_desc;
+
if (!usb_endpoint_maxp(devpriv->ep_rx) || !usb_endpoint_maxp(devpriv->ep_tx))
return -EINVAL;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 109/158] serial: mxs-auart: add spinlock around changing cts state
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 108/158] comedi: vmk80xx: fix incomplete endpoint checking Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 110/158] serial/pmac_zilog: Remove flawed mitigation for rx irq flood Greg Kroah-Hartman
` (57 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Frank Li, Emil Kronborg
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emil Kronborg <emil.kronborg@protonmail.com>
commit 54c4ec5f8c471b7c1137a1f769648549c423c026 upstream.
The uart_handle_cts_change() function in serial_core expects the caller
to hold uport->lock. For example, I have seen the below kernel splat,
when the Bluetooth driver is loaded on an i.MX28 board.
[ 85.119255] ------------[ cut here ]------------
[ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec
[ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs
[ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1
[ 85.151396] Hardware name: Freescale MXS (Device Tree)
[ 85.156679] Workqueue: hci0 hci_power_on [bluetooth]
(...)
[ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4
[ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210
(...)
Cc: stable@vger.kernel.org
Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/mxs-auart.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1080,11 +1080,13 @@ static void mxs_auart_set_ldisc(struct u
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
{
- u32 istat;
+ u32 istat, stat;
struct mxs_auart_port *s = context;
u32 mctrl_temp = s->mctrl_prev;
- u32 stat = mxs_read(s, REG_STAT);
+ uart_port_lock(&s->port);
+
+ stat = mxs_read(s, REG_STAT);
istat = mxs_read(s, REG_INTR);
/* ack irq */
@@ -1120,6 +1122,8 @@ static irqreturn_t mxs_auart_irq_handle(
istat &= ~AUART_INTR_TXIS;
}
+ uart_port_unlock(&s->port);
+
return IRQ_HANDLED;
}
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 110/158] serial/pmac_zilog: Remove flawed mitigation for rx irq flood
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 109/158] serial: mxs-auart: add spinlock around changing cts state Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 111/158] serial: stm32: Return IRQ_NONE in the ISR if no handling happend Greg Kroah-Hartman
` (56 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Benjamin Herrenschmidt,
Michael Ellerman, Nicholas Piggin, Christophe Leroy,
Aneesh Kumar K.V, Naveen N. Rao, Andy Shevchenko, stable,
linux-m68k, Finn Thain
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Finn Thain <fthain@linux-m68k.org>
commit 1be3226445362bfbf461c92a5bcdb1723f2e4907 upstream.
The mitigation was intended to stop the irq completely. That may be
better than a hard lock-up but it turns out that you get a crash anyway
if you're using pmac_zilog as a serial console:
ttyPZ0: pmz: rx irq flood !
BUG: spinlock recursion on CPU#0, swapper/0
That's because the pr_err() call in pmz_receive_chars() results in
pmz_console_write() attempting to lock a spinlock already locked in
pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal
BUG splat. The spinlock in question is the one in struct uart_port.
Even when it's not fatal, the serial port rx function ceases to work.
Also, the iteration limit doesn't play nicely with QEMU, as can be
seen in the bug report linked below.
A web search for other reports of the error message "pmz: rx irq flood"
didn't produce anything. So I don't think this code is needed any more.
Remove it.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Link: https://github.com/vivier/qemu-m68k/issues/44
Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/pmac_zilog.c | 14 --------------
1 file changed, 14 deletions(-)
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -210,7 +210,6 @@ static bool pmz_receive_chars(struct uar
{
struct tty_port *port;
unsigned char ch, r1, drop, flag;
- int loops = 0;
/* Sanity check, make sure the old bug is no longer happening */
if (uap->port.state == NULL) {
@@ -291,25 +290,12 @@ static bool pmz_receive_chars(struct uar
if (r1 & Rx_OVR)
tty_insert_flip_char(port, 0, TTY_OVERRUN);
next_char:
- /* We can get stuck in an infinite loop getting char 0 when the
- * line is in a wrong HW state, we break that here.
- * When that happens, I disable the receive side of the driver.
- * Note that what I've been experiencing is a real irq loop where
- * I'm getting flooded regardless of the actual port speed.
- * Something strange is going on with the HW
- */
- if ((++loops) > 1000)
- goto flood;
ch = read_zsreg(uap, R0);
if (!(ch & Rx_CH_AV))
break;
}
return true;
- flood:
- pmz_interrupt_control(uap, 0);
- pmz_error("pmz: rx irq flood !\n");
- return true;
}
static void pmz_status_handle(struct uart_pmac_port *uap)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 111/158] serial: stm32: Return IRQ_NONE in the ISR if no handling happend
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 110/158] serial/pmac_zilog: Remove flawed mitigation for rx irq flood Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 112/158] serial: stm32: Reset .throttled state in .startup() Greg Kroah-Hartman
` (55 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
commit 13c785323b36b845300b256d0e5963c3727667d7 upstream.
If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.
A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/stm32-usart.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -857,6 +857,7 @@ static irqreturn_t stm32_usart_interrupt
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
u32 sr;
unsigned int size;
+ irqreturn_t ret = IRQ_NONE;
sr = readl_relaxed(port->membase + ofs->isr);
@@ -865,11 +866,14 @@ static irqreturn_t stm32_usart_interrupt
(sr & USART_SR_TC)) {
stm32_usart_tc_interrupt_disable(port);
stm32_usart_rs485_rts_disable(port);
+ ret = IRQ_HANDLED;
}
- if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG)
+ if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) {
writel_relaxed(USART_ICR_RTOCF,
port->membase + ofs->icr);
+ ret = IRQ_HANDLED;
+ }
if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) {
/* Clear wake up flag and disable wake up interrupt */
@@ -878,6 +882,7 @@ static irqreturn_t stm32_usart_interrupt
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
pm_wakeup_event(tport->tty->dev, 0);
+ ret = IRQ_HANDLED;
}
/*
@@ -892,6 +897,7 @@ static irqreturn_t stm32_usart_interrupt
uart_unlock_and_check_sysrq(port);
if (size)
tty_flip_buffer_push(tport);
+ ret = IRQ_HANDLED;
}
}
@@ -899,6 +905,7 @@ static irqreturn_t stm32_usart_interrupt
spin_lock(&port->lock);
stm32_usart_transmit_chars(port);
spin_unlock(&port->lock);
+ ret = IRQ_HANDLED;
}
/* Receiver timeout irq for DMA RX */
@@ -908,9 +915,10 @@ static irqreturn_t stm32_usart_interrupt
uart_unlock_and_check_sysrq(port);
if (size)
tty_flip_buffer_push(tport);
+ ret = IRQ_HANDLED;
}
- return IRQ_HANDLED;
+ return ret;
}
static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 112/158] serial: stm32: Reset .throttled state in .startup()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 111/158] serial: stm32: Return IRQ_NONE in the ISR if no handling happend Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 113/158] serial: core: Clearing the circular buffer before NULLifying it Greg Kroah-Hartman
` (54 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Uwe Kleine-König
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
commit ea2624b5b829b8f93c0dce25721d835969b34faf upstream.
When an UART is opened that still has .throttled set from a previous
open, the RX interrupt is enabled but the irq handler doesn't consider
it. This easily results in a stuck irq with the effect to occupy the CPU
in a tight loop.
So reset the throttle state in .startup() to ensure that RX irqs are
handled.
Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/stm32-usart.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1077,6 +1077,7 @@ static int stm32_usart_startup(struct ua
val |= USART_CR2_SWAP;
writel_relaxed(val, port->membase + ofs->cr2);
}
+ stm32_port->throttled = false;
/* RX FIFO Flush */
if (ofs->rqr != UNDEF_REG)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 113/158] serial: core: Clearing the circular buffer before NULLifying it
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 112/158] serial: stm32: Reset .throttled state in .startup() Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 114/158] serial: core: Fix missing shutdown and startup for serial base port Greg Kroah-Hartman
` (53 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, stable, kernel test robot, Andy Shevchenko
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
commit 9cf7ea2eeb745213dc2a04103e426b960e807940 upstream.
The circular buffer is NULLified in uart_tty_port_shutdown()
under the spin lock. However, the PM or other timer based callbacks
may still trigger after this event without knowning that buffer pointer
is not valid. Since the serial code is a bit inconsistent in checking
the buffer state (some rely on the head-tail positions, some on the
buffer pointer), it's better to have both aligned, i.e. buffer pointer
to be NULL and head-tail possitions to be the same, meaning it's empty.
This will prevent asynchronous calls to dereference NULL pointer as
reported recently in 8250 case:
BUG: kernel NULL pointer dereference, address: 00000cf5
Workqueue: pm pm_runtime_work
EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809)
...
? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809)
__start_tx (drivers/tty/serial/8250/8250_port.c:1551)
serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654)
serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63)
__rpm_callback (drivers/base/power/runtime.c:393)
? serial_port_remove (drivers/tty/serial/serial_port.c:50)
rpm_suspend (drivers/base/power/runtime.c:447)
The proposed change will prevent ->start_tx() to be called during
suspend on shut down port.
Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404031607.2e92eebe-lkp@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404150034.41648-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/serial_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1782,6 +1782,7 @@ static void uart_tty_port_shutdown(struc
* Free the transmit buffer.
*/
spin_lock_irq(&uport->lock);
+ uart_circ_clear(&state->xmit);
buf = state->xmit.buf;
state->xmit.buf = NULL;
spin_unlock_irq(&uport->lock);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 114/158] serial: core: Fix missing shutdown and startup for serial base port
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 113/158] serial: core: Clearing the circular buffer before NULLifying it Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 115/158] USB: serial: option: add Fibocom FM135-GL variants Greg Kroah-Hartman
` (52 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, stable, Jiri Slaby, Tony Lindgren
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Lindgren <tony@atomide.com>
commit 1aa4ad4eb695bac1b0a7ba542a16d6833c9c8dd8 upstream.
We are seeing start_tx being called after port shutdown as noted by Jiri.
This happens because we are missing the startup and shutdown related
functions for the serial base port.
Let's fix the issue by adding startup and shutdown functions for the
serial base port to block tx flushing for the serial base port when the
port is not in use.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240411055848.38190-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/serial_base.h | 4 ++++
drivers/tty/serial/serial_core.c | 20 +++++++++++++++++---
drivers/tty/serial/serial_port.c | 34 ++++++++++++++++++++++++++++++++++
3 files changed, 55 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/serial_base.h
+++ b/drivers/tty/serial/serial_base.h
@@ -22,6 +22,7 @@ struct serial_ctrl_device {
struct serial_port_device {
struct device dev;
struct uart_port *port;
+ unsigned int tx_enabled:1;
};
int serial_base_ctrl_init(void);
@@ -30,6 +31,9 @@ void serial_base_ctrl_exit(void);
int serial_base_port_init(void);
void serial_base_port_exit(void);
+void serial_base_port_startup(struct uart_port *port);
+void serial_base_port_shutdown(struct uart_port *port);
+
int serial_base_driver_register(struct device_driver *driver);
void serial_base_driver_unregister(struct device_driver *driver);
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -323,16 +323,26 @@ static int uart_startup(struct tty_struc
bool init_hw)
{
struct tty_port *port = &state->port;
+ struct uart_port *uport;
int retval;
if (tty_port_initialized(port))
- return 0;
+ goto out_base_port_startup;
retval = uart_port_startup(tty, state, init_hw);
- if (retval)
+ if (retval) {
set_bit(TTY_IO_ERROR, &tty->flags);
+ return retval;
+ }
- return retval;
+out_base_port_startup:
+ uport = uart_port_check(state);
+ if (!uport)
+ return -EIO;
+
+ serial_base_port_startup(uport);
+
+ return 0;
}
/*
@@ -355,6 +365,9 @@ static void uart_shutdown(struct tty_str
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
+ if (uport)
+ serial_base_port_shutdown(uport);
+
if (tty_port_initialized(port)) {
tty_port_set_initialized(port, false);
@@ -1769,6 +1782,7 @@ static void uart_tty_port_shutdown(struc
uport->ops->stop_rx(uport);
spin_unlock_irq(&uport->lock);
+ serial_base_port_shutdown(uport);
uart_port_shutdown(port);
/*
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -36,8 +36,12 @@ static int serial_port_runtime_resume(st
/* Flush any pending TX for the port */
spin_lock_irqsave(&port->lock, flags);
+ if (!port_dev->tx_enabled)
+ goto unlock;
if (__serial_port_busy(port))
port->ops->start_tx(port);
+
+unlock:
spin_unlock_irqrestore(&port->lock, flags);
out:
@@ -57,6 +61,11 @@ static int serial_port_runtime_suspend(s
return 0;
uart_port_lock_irqsave(port, &flags);
+ if (!port_dev->tx_enabled) {
+ uart_port_unlock_irqrestore(port, flags);
+ return 0;
+ }
+
busy = __serial_port_busy(port);
if (busy)
port->ops->start_tx(port);
@@ -68,6 +77,31 @@ static int serial_port_runtime_suspend(s
return busy ? -EBUSY : 0;
}
+static void serial_base_port_set_tx(struct uart_port *port,
+ struct serial_port_device *port_dev,
+ bool enabled)
+{
+ unsigned long flags;
+
+ uart_port_lock_irqsave(port, &flags);
+ port_dev->tx_enabled = enabled;
+ uart_port_unlock_irqrestore(port, flags);
+}
+
+void serial_base_port_startup(struct uart_port *port)
+{
+ struct serial_port_device *port_dev = port->port_dev;
+
+ serial_base_port_set_tx(port, port_dev, true);
+}
+
+void serial_base_port_shutdown(struct uart_port *port)
+{
+ struct serial_port_device *port_dev = port->port_dev;
+
+ serial_base_port_set_tx(port, port_dev, false);
+}
+
static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm,
serial_port_runtime_suspend,
serial_port_runtime_resume, NULL);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 115/158] USB: serial: option: add Fibocom FM135-GL variants
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 114/158] serial: core: Fix missing shutdown and startup for serial base port Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 116/158] USB: serial: option: add support for Fibocom FM650/FG650 Greg Kroah-Hartman
` (51 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, bolan wang, Johan Hovold
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: bolan wang <bolan.wang@fibocom.com>
commit 356952b13af5b2c338df1e06889fd1b5e12cbbf4 upstream.
Update the USB serial option driver support for the Fibocom
FM135-GL LTE modules.
- VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x0115: mbim, diag, at, pipe
Here are the outputs of usb-devices:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0115 Rev=05.15
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom Module
S: SerialNumber=12345678
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: bolan wang <bolan.wang@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2272,6 +2272,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff), /* Fibocom FM135 (laptop MBIM) */
+ .driver_info = RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 116/158] USB: serial: option: add support for Fibocom FM650/FG650
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 115/158] USB: serial: option: add Fibocom FM135-GL variants Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 117/158] USB: serial: option: add Lonsung U8300/U9300 product Greg Kroah-Hartman
` (50 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Chuanhong Guo, Johan Hovold
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chuanhong Guo <gch981213@gmail.com>
commit fb1f4584b1215e8c209f6b3a4028ed8351a0e961 upstream.
Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes.
This patch adds support to all 4 modes.
In all 4 modes, the first serial port is the AT console while the other
3 appear to be diagnostic interfaces for dumping modem logs.
usb-devices output for all modes:
ECM:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=0a04 Rev=04.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=FG650 Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
NCM:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=0a05 Rev=04.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=FG650 Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
RNDIS:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=0a06 Rev=04.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=FG650 Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
MBIM:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=0a07 Rev=04.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=FG650 Module
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2279,6 +2279,10 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */
.driver_info = RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a04, 0xff) }, /* Fibocom FM650-CN (ECM mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */
{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 117/158] USB: serial: option: add Lonsung U8300/U9300 product
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 116/158] USB: serial: option: add support for Fibocom FM650/FG650 Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 118/158] USB: serial: option: support Quectel EM060K sub-models Greg Kroah-Hartman
` (49 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Coia Prant, Lars Melin, Johan Hovold
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Coia Prant <coiaprant@gmail.com>
commit cf16ffa17c398434a77b8a373e69287c95b60de2 upstream.
Update the USB serial option driver to support Longsung U8300/U9300.
For U8300
Interface 4 is used by for QMI interface in stock firmware of U8300, the
router which uses U8300 modem.
Interface 5 is used by for ADB interface in stock firmware of U8300, the
router which uses U8300 modem.
Interface mapping is:
0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB
T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1c9e ProdID=9b05 Rev=03.18
S: Manufacturer=Android
S: Product=Android
C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
For U9300
Interface 1 is used by for ADB interface in stock firmware of U9300, the
router which uses U9300 modem.
Interface 4 is used by for QMI interface in stock firmware of U9300, the
router which uses U9300 modem.
Interface mapping is:
0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI
Note: Interface 3 of some models of the U9300 series can send AT commands.
T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1c9e ProdID=9b3c Rev=03.18
S: Manufacturer=Android
S: Product=Android
C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
Tested successfully using Modem Manager on U9300.
Tested successfully AT commands using If=1, If=2 and If=3 on U9300.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
[ johan: drop product defines, trim commit message ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2052,6 +2052,10 @@ static const struct usb_device_id option
.driver_info = RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff),
.driver_info = RSVD(4) },
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b05), /* Longsung U8300 */
+ .driver_info = RSVD(4) | RSVD(5) },
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b3c), /* Longsung U9300 */
+ .driver_info = RSVD(0) | RSVD(4) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 118/158] USB: serial: option: support Quectel EM060K sub-models
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 117/158] USB: serial: option: add Lonsung U8300/U9300 product Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 119/158] USB: serial: option: add Rolling RW101-GL and RW135-GL support Greg Kroah-Hartman
` (48 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Jerry Meng, Johan Hovold
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jerry Meng <jerry-meng@foxmail.com>
commit c840244aba7ad2b83ed904378b36bd6aef25511c upstream.
EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models,
having the same name "Quectel EM060K-GL" and the same interface layout.
MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0129 Rev= 5.04
S: Manufacturer=Quectel
S: Product=Quectel EM060K-GL
S: SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jerry Meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -255,6 +255,10 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EM061K_LMS 0x0124
#define QUECTEL_PRODUCT_EC25 0x0125
#define QUECTEL_PRODUCT_EM060K_128 0x0128
+#define QUECTEL_PRODUCT_EM060K_129 0x0129
+#define QUECTEL_PRODUCT_EM060K_12a 0x012a
+#define QUECTEL_PRODUCT_EM060K_12b 0x012b
+#define QUECTEL_PRODUCT_EM060K_12c 0x012c
#define QUECTEL_PRODUCT_EG91 0x0191
#define QUECTEL_PRODUCT_EG95 0x0195
#define QUECTEL_PRODUCT_BG96 0x0296
@@ -1218,6 +1222,18 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 119/158] USB: serial: option: add Rolling RW101-GL and RW135-GL support
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 118/158] USB: serial: option: support Quectel EM060K sub-models Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 120/158] USB: serial: option: add Telit FN920C04 rmnet compositions Greg Kroah-Hartman
` (47 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Vanillan Wang, Johan Hovold
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vanillan Wang <vanillanwang@163.com>
commit 311f97a4c7c22a01f8897bddf00428dfd0668e79 upstream.
Update the USB serial option driver support for the Rolling
LTE modules.
- VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x01a2: mbim, diag, at, pipe
- VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x01a3: mbim, pipe
- VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x01a4: mbim, diag, at, pipe
- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET
interface for /Linux/Chrome OS)
0x0104: RMNET, diag, at, pipe
- VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x0115: MBIM, diag, at, pipe
Here are the outputs of usb-devices:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=01a2 Rev=05.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling Module
S: SerialNumber=12345678
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=01a3 Rev=05.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling Module
S: SerialNumber=12345678
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=01a4 Rev=05.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling Module
S: SerialNumber=12345678
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=33f8 ProdID=0104 Rev=05.04
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling Module
S: SerialNumber=ba2eb033
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=33f8 ProdID=0115 Rev=05.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling Module
S: SerialNumber=12345678
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Vanillan Wang <vanillanwang@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2307,6 +2307,14 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */
{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */
+ { USB_DEVICE(0x33f8, 0x0104), /* Rolling RW101-GL (laptop RMNET) */
+ .driver_info = RSVD(4) | RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff), /* Rolling RW101-GL (laptop MBIM) */
+ .driver_info = RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff), /* Rolling RW135-GL (laptop MBIM) */
+ .driver_info = RSVD(5) },
{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 120/158] USB: serial: option: add Telit FN920C04 rmnet compositions
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 119/158] USB: serial: option: add Rolling RW101-GL and RW135-GL support Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 121/158] Revert "usb: cdc-wdm: close race between read and workqueue" Greg Kroah-Hartman
` (46 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Daniele Palmas, Johan Hovold
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniele Palmas <dnlplm@gmail.com>
commit 582ee2f9d268d302595db3e36b985e5cbb93284d upstream.
Add the following Telit FN920C04 compositions:
0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a4 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a9 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1376,6 +1376,12 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */
.driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */
+ .driver_info = RSVD(0) | NCTRL(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff), /* Telit FN20C04 (rmnet) */
+ .driver_info = RSVD(0) | NCTRL(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff), /* Telit FN20C04 (rmnet) */
+ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 121/158] Revert "usb: cdc-wdm: close race between read and workqueue"
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (119 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 120/158] USB: serial: option: add Telit FN920C04 rmnet compositions Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 122/158] usb: dwc2: host: Fix dereference issue in DDMA completion flow Greg Kroah-Hartman
` (45 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, : Aleksander Morgado, stable,
Oliver Neukum, Bjørn Mork
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1607830dadeefc407e4956336d9fcd9e9defd810 upstream.
This reverts commit 339f83612f3a569b194680768b22bf113c26a29d.
It has been found to cause problems in a number of Chromebook devices,
so revert the change until it can be brought back in a safe way.
Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.org
Reported-by:: Aleksander Morgado <aleksandermj@chromium.org>
Fixes: 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue")
Cc: stable <stable@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/class/cdc-wdm.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -485,7 +485,6 @@ out_free_mem:
static int service_outstanding_interrupt(struct wdm_device *desc)
{
int rv = 0;
- int used;
/* submit read urb only if the device is waiting for it */
if (!desc->resp_count || !--desc->resp_count)
@@ -500,10 +499,7 @@ static int service_outstanding_interrupt
goto out;
}
- used = test_and_set_bit(WDM_RESPONDING, &desc->flags);
- if (used)
- goto out;
-
+ set_bit(WDM_RESPONDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
rv = usb_submit_urb(desc->response, GFP_KERNEL);
spin_lock_irq(&desc->iuspin);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 122/158] usb: dwc2: host: Fix dereference issue in DDMA completion flow.
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (120 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 121/158] Revert "usb: cdc-wdm: close race between read and workqueue" Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 123/158] usb: Disable USB3 LPM at shutdown Greg Kroah-Hartman
` (44 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Dan Carpenter, Minas Harutyunyan
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
commit eed04fa96c48790c1cce73c8a248e9d460b088f8 upstream.
Fixed variable dereference issue in DDMA completion flow.
Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode")
CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc2/hcd_ddma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -867,13 +867,15 @@ static int dwc2_cmpl_host_isoc_dma_desc(
struct dwc2_dma_desc *dma_desc;
struct dwc2_hcd_iso_packet_desc *frame_desc;
u16 frame_desc_idx;
- struct urb *usb_urb = qtd->urb->priv;
+ struct urb *usb_urb;
u16 remain = 0;
int rc = 0;
if (!qtd->urb)
return -EINVAL;
+ usb_urb = qtd->urb->priv;
+
dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx *
sizeof(struct dwc2_dma_desc)),
sizeof(struct dwc2_dma_desc),
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 123/158] usb: Disable USB3 LPM at shutdown
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (121 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 122/158] usb: dwc2: host: Fix dereference issue in DDMA completion flow Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 124/158] usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error Greg Kroah-Hartman
` (43 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Kai-Heng Feng, stable
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
commit d920a2ed8620be04a3301e1a9c2b7cc1de65f19d upstream.
SanDisks USB3 storage may disapper after system reboot:
usb usb2-port3: link state change
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
usb usb2-port3: do warm reset, port only
xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0
usb usb2-port3: not warm reset yet, waiting 50ms
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0
usb usb2-port3: not warm reset yet, waiting 200ms
...
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0
usb usb2-port3: not warm reset yet, waiting 200ms
xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0
xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0
usb usb2-port3: not enabled, trying warm reset again...
This is due to the USB device still cause port change event after xHCI is
shuted down:
xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001
xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling.
xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling
xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling
xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0
xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling.
xhci_hcd 0000:38:00.0: // Halt the HC
xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1
xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling.
xhci_hcd 0000:00:14.0: // Halt the HC
xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203
xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1311
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203
xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203
xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203
xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203
usb 2-3: device not accepting address 2, error -108
xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command
xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263
xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1271
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1
usb usb2-port3: not reset yet, waiting 60ms
ACPI: PM: Preparing to enter system sleep state S5
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1
usb usb2-port3: not reset yet, waiting 200ms
reboot: Restarting system
The port change event is caused by LPM transition, so disabling LPM at shutdown
to make sure the device is in U0 for warmboot.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240305065140.66801-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/port.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -448,8 +448,10 @@ static void usb_port_shutdown(struct dev
{
struct usb_port *port_dev = to_usb_port(dev);
- if (port_dev->child)
+ if (port_dev->child) {
usb_disable_usb2_hardware_lpm(port_dev->child);
+ usb_unlocked_disable_lpm(port_dev->child);
+ }
}
static const struct dev_pm_ops usb_port_pm_ops = {
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 124/158] usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (122 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 123/158] usb: Disable USB3 LPM at shutdown Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 125/158] mei: me: disable RPL-S on SPS and IGN firmwares Greg Kroah-Hartman
` (42 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Norihiko Hama, stable
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Norihiko Hama <Norihiko.Hama@alpsalpine.com>
commit 6334b8e4553cc69f51e383c9de545082213d785e upstream.
When ncm function is working and then stop usb0 interface for link down,
eth_stop() is called. At this piont, accidentally if usb transport error
should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.
After that, ncm_disable() is called to disable for ncm unbind
but gether_disconnect() is never called since 'in_ep' is not enabled.
As the result, ncm object is released in ncm unbind
but 'dev->port_usb' associated to 'ncm->port' is not NULL.
And when ncm bind again to recover netdev, ncm object is reallocated
but usb0 interface is already associated to previous released ncm object.
Therefore, once usb0 interface is up and eth_start_xmit() is called,
released ncm object is dereferrenced and it might cause use-after-free memory.
[function unlink via configfs]
usb0: eth_stop dev->port_usb=ffffff9b179c3200
--> error happens in usb_ep_enable().
NCM: ncm_disable: ncm=ffffff9b179c3200
--> no gether_disconnect() since ncm->port.in_ep->enabled is false.
NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm
[function link via configfs]
NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm
usb0: eth_start dev->port_usb=ffffff9b179c3200 <--
eth_start_xmit()
--> dev->wrap()
Unable to handle kernel paging request at virtual address dead00000000014f
This patch addresses the issue by checking if 'ncm->netdev' is not NULL at
ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'.
It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect
rather than check 'ncm->port.in_ep->enabled' since it might not be enabled
but the gether connection might be established.
Signed-off-by: Norihiko Hama <Norihiko.Hama@alpsalpine.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240327023550.51214-1-Norihiko.Hama@alpsalpine.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/function/f_ncm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -869,7 +869,7 @@ static int ncm_set_alt(struct usb_functi
if (alt > 1)
goto fail;
- if (ncm->port.in_ep->enabled) {
+ if (ncm->netdev) {
DBG(cdev, "reset ncm\n");
ncm->netdev = NULL;
gether_disconnect(&ncm->port);
@@ -1354,7 +1354,7 @@ static void ncm_disable(struct usb_funct
DBG(cdev, "ncm deactivated\n");
- if (ncm->port.in_ep->enabled) {
+ if (ncm->netdev) {
ncm->netdev = NULL;
gether_disconnect(&ncm->port);
}
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 125/158] mei: me: disable RPL-S on SPS and IGN firmwares
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (123 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 124/158] usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 126/158] speakup: Avoid crash on very long word Greg Kroah-Hartman
` (41 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Alexander Usyskin, Tomas Winkler
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Usyskin <alexander.usyskin@intel.com>
commit 0dc04112bee6fdd6eb847ccb32214703022c0269 upstream.
Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN)
and SPS firmwares for RPL-S devices. These firmwares do not support
the MEI protocol.
Fixes: 3ed8c7d39cfe ("mei: me: add raptor lake point S DID")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240312051958.118478-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/mei/pci-me.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -116,7 +116,7 @@ static const struct pci_device_id mei_me
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_SPS_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)},
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 126/158] speakup: Avoid crash on very long word
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (124 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 125/158] mei: me: disable RPL-S on SPS and IGN firmwares Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 127/158] fs: sysfs: Fix reference leak in sysfs_break_active_protection() Greg Kroah-Hartman
` (40 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Samuel Thibault
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Samuel Thibault <samuel.thibault@ens-lyon.org>
commit c8d2f34ea96ea3bce6ba2535f867f0d4ee3b22e1 upstream.
In case a console is set up really large and contains a really long word
(> 256 characters), we have to stop before the length of the word buffer.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Fixes: c6e3fd22cd538 ("Staging: add speakup to the staging directory")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240323164843.1426997-1-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/accessibility/speakup/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/accessibility/speakup/main.c
+++ b/drivers/accessibility/speakup/main.c
@@ -574,7 +574,7 @@ static u_long get_word(struct vc_data *v
}
attr_ch = get_char(vc, (u_short *)tmp_pos, &spk_attr);
buf[cnt++] = attr_ch;
- while (tmpx < vc->vc_cols - 1) {
+ while (tmpx < vc->vc_cols - 1 && cnt < sizeof(buf) - 1) {
tmp_pos += 2;
tmpx++;
ch = get_char(vc, (u_short *)tmp_pos, &temp);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 127/158] fs: sysfs: Fix reference leak in sysfs_break_active_protection()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (125 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 126/158] speakup: Avoid crash on very long word Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 128/158] sched: Add missing memory barrier in switch_mm_cid Greg Kroah-Hartman
` (39 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Alan Stern, Bart Van Assche, Tejun Heo
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <stern@rowland.harvard.edu>
commit a90bca2228c0646fc29a72689d308e5fe03e6d78 upstream.
The sysfs_break_active_protection() routine has an obvious reference
leak in its error path. If the call to kernfs_find_and_get() fails then
kn will be NULL, so the companion sysfs_unbreak_active_protection()
routine won't get called (and would only cause an access violation by
trying to dereference kn->parent if it was called). As a result, the
reference to kobj acquired at the start of the function will never be
released.
Fix the leak by adding an explicit kobject_put() call when kn is NULL.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 2afc9166f79b ("scsi: sysfs: Introduce sysfs_{un,}break_active_protection()")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/8a4d3f0f-c5e3-4b70-a188-0ca433f9e6f9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/sysfs/file.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -450,6 +450,8 @@ struct kernfs_node *sysfs_break_active_p
kn = kernfs_find_and_get(kobj->sd, attr->name);
if (kn)
kernfs_break_active_protection(kn);
+ else
+ kobject_put(kobj);
return kn;
}
EXPORT_SYMBOL_GPL(sysfs_break_active_protection);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 128/158] sched: Add missing memory barrier in switch_mm_cid
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (126 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 127/158] fs: sysfs: Fix reference leak in sysfs_break_active_protection() Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 129/158] KVM: x86: Snapshot if a vCPUs vendor model is AMD vs. Intel compatible Greg Kroah-Hartman
` (38 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, levi.yun, Mathieu Desnoyers,
Ingo Molnar, Linus Torvalds, Catalin Marinas, Dave Hansen
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit fe90f3967bdb3e13f133e5f44025e15f943a99c5 upstream.
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17f25 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Reported-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: <stable@vger.kernel.org> # 6.4.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/barrier.h | 3 +++
include/asm-generic/barrier.h | 8 ++++++++
kernel/sched/sched.h | 20 ++++++++++++++------
3 files changed, 25 insertions(+), 6 deletions(-)
--- a/arch/x86/include/asm/barrier.h
+++ b/arch/x86/include/asm/barrier.h
@@ -79,6 +79,9 @@ do { \
#define __smp_mb__before_atomic() do { } while (0)
#define __smp_mb__after_atomic() do { } while (0)
+/* Writing to CR3 provides a full memory barrier in switch_mm(). */
+#define smp_mb__after_switch_mm() do { } while (0)
+
#include <asm-generic/barrier.h>
#endif /* _ASM_X86_BARRIER_H */
--- a/include/asm-generic/barrier.h
+++ b/include/asm-generic/barrier.h
@@ -296,5 +296,13 @@ do { \
#define io_stop_wc() do { } while (0)
#endif
+/*
+ * Architectures that guarantee an implicit smp_mb() in switch_mm()
+ * can override smp_mb__after_switch_mm.
+ */
+#ifndef smp_mb__after_switch_mm
+# define smp_mb__after_switch_mm() smp_mb()
+#endif
+
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_GENERIC_BARRIER_H */
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -88,6 +88,8 @@
# include <asm/paravirt_api_clock.h>
#endif
+#include <asm/barrier.h>
+
#include "cpupri.h"
#include "cpudeadline.h"
@@ -3500,13 +3502,19 @@ static inline void switch_mm_cid(struct
* between rq->curr store and load of {prev,next}->mm->pcpu_cid[cpu].
* Provide it here.
*/
- if (!prev->mm) // from kernel
+ if (!prev->mm) { // from kernel
smp_mb();
- /*
- * user -> user transition guarantees a memory barrier through
- * switch_mm() when current->mm changes. If current->mm is
- * unchanged, no barrier is needed.
- */
+ } else { // from user
+ /*
+ * user->user transition relies on an implicit
+ * memory barrier in switch_mm() when
+ * current->mm changes. If the architecture
+ * switch_mm() does not have an implicit memory
+ * barrier, it is emitted here. If current->mm
+ * is unchanged, no barrier is needed.
+ */
+ smp_mb__after_switch_mm();
+ }
}
if (prev->mm_cid_active) {
mm_cid_snapshot_time(rq, prev->mm);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 129/158] KVM: x86: Snapshot if a vCPUs vendor model is AMD vs. Intel compatible
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (127 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 128/158] sched: Add missing memory barrier in switch_mm_cid Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 130/158] KVM: x86/pmu: Disable support for adaptive PEBS Greg Kroah-Hartman
` (37 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Sean Christopherson, Paolo Bonzini
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <seanjc@google.com>
commit fd706c9b1674e2858766bfbf7430534c2b26fbef upstream.
Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is
compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with
helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel
vs. AMD behavior related to masking the LVTPC entry, KVM will need to
check for vendor compatibility on every PMI injection, i.e. querying for
AMD will soon be a moderately hot path.
Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's
default behavior, both if userspace omits (or never sets) CPUID 0x0 and if
userspace sets a completely unknown vendor. One could argue that KVM
should treat such vCPUs as not being compatible with Intel *or* AMD, but
that would add useless complexity to KVM.
KVM needs to do *something* in the face of vendor specific behavior, and
so unless KVM conjured up a magic third option, choosing to treat unknown
vendors as neither Intel nor AMD means that checks on AMD compatibility
would yield Intel behavior, and checks for Intel compatibility would yield
AMD behavior. And that's far worse as it would effectively yield random
behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs.
!Intel. And practically speaking, all x86 CPUs follow either Intel or AMD
architecture, i.e. "supporting" an unknown third architecture adds no
value.
Deliberately don't convert any of the existing guest_cpuid_is_intel()
checks, as the Intel side of things is messier due to some flows explicitly
checking for exactly vendor==Intel, versus some flows assuming anything
that isn't "AMD compatible" gets Intel behavior. The Intel code will be
cleaned up in the future.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/cpuid.c | 1 +
arch/x86/kvm/cpuid.h | 10 ++++++++++
arch/x86/kvm/mmu/mmu.c | 2 +-
arch/x86/kvm/x86.c | 2 +-
5 files changed, 14 insertions(+), 2 deletions(-)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -828,6 +828,7 @@ struct kvm_vcpu_arch {
int cpuid_nent;
struct kvm_cpuid_entry2 *cpuid_entries;
struct kvm_hypervisor_cpuid kvm_cpuid;
+ bool is_amd_compatible;
/*
* FIXME: Drop this macro and use KVM_NR_GOVERNED_FEATURES directly
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -362,6 +362,7 @@ static void kvm_vcpu_after_set_cpuid(str
kvm_update_pv_runtime(vcpu);
+ vcpu->arch.is_amd_compatible = guest_cpuid_is_amd_or_hygon(vcpu);
vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
vcpu->arch.reserved_gpa_bits = kvm_vcpu_reserved_gpa_bits_raw(vcpu);
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -125,6 +125,16 @@ static inline bool guest_cpuid_is_intel(
return best && is_guest_vendor_intel(best->ebx, best->ecx, best->edx);
}
+static inline bool guest_cpuid_is_amd_compatible(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.is_amd_compatible;
+}
+
+static inline bool guest_cpuid_is_intel_compatible(struct kvm_vcpu *vcpu)
+{
+ return !guest_cpuid_is_amd_compatible(vcpu);
+}
+
static inline int guest_cpuid_family(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -4788,7 +4788,7 @@ static void reset_guest_rsvds_bits_mask(
context->cpu_role.base.level, is_efer_nx(context),
guest_can_use(vcpu, X86_FEATURE_GBPAGES),
is_cr4_pse(context),
- guest_cpuid_is_amd_or_hygon(vcpu));
+ guest_cpuid_is_amd_compatible(vcpu));
}
static void __reset_rsvds_bits_mask_ept(struct rsvd_bits_validate *rsvd_check,
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3317,7 +3317,7 @@ static bool is_mci_status_msr(u32 msr)
static bool can_set_mci_status(struct kvm_vcpu *vcpu)
{
/* McStatusWrEn enabled? */
- if (guest_cpuid_is_amd_or_hygon(vcpu))
+ if (guest_cpuid_is_amd_compatible(vcpu))
return !!(vcpu->arch.msr_hwcr & BIT_ULL(18));
return false;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 130/158] KVM: x86/pmu: Disable support for adaptive PEBS
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (128 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 129/158] KVM: x86: Snapshot if a vCPUs vendor model is AMD vs. Intel compatible Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 131/158] KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms Greg Kroah-Hartman
` (36 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Like Xu, Mingwei Zhang, Zhenyu Wang,
Zhang Xiong, Lv Zhiyuan, Dapeng Mi, Jim Mattson, Like Xu,
Sean Christopherson
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson <seanjc@google.com>
commit 9e985cbf2942a1bb8fcef9adc2a17d90fd7ca8ee upstream.
Drop support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken without an obvious/easy path forward, and because
exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak
host kernel addresses to the guest.
Bug #1 is that KVM doesn't account for the upper 32 bits of
IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g
fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters()
stores local variables as u8s and truncates the upper bits too, etc.
Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value
for PEBS events, perf will _always_ generate an adaptive record, even if
the guest requested a basic record. Note, KVM will also enable adaptive
PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the
guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero,
i.e. the guest will only ever see Basic records.
Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper
bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and
intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE
either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what
KVM requests.
Bug #4 is that adaptive PEBS *might* effectively bypass event filters set
by the host, as "Updated Memory Access Info Group" records information
that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER.
Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least
zeros) when entering a vCPU with adaptive PEBS, which allows the guest
to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries"
records.
Disable adaptive PEBS support as an immediate fix due to the severity of
the LBR leak in particular, and because fixing all of the bugs will be
non-trivial, e.g. not suitable for backporting to stable kernels.
Note! This will break live migration, but trying to make KVM play nice
with live migration would be quite complicated, wouldn't be guaranteed to
work (i.e. KVM might still kill/confuse the guest), and it's not clear
that there are any publicly available VMMs that support adaptive PEBS,
let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't
support PEBS in any capacity.
Link: https://lore.kernel.org/all/20240306230153.786365-1-seanjc@google.com
Link: https://lore.kernel.org/all/ZeepGjHCeSfadANM@google.com
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Cc: stable@vger.kernel.org
Cc: Like Xu <like.xu.linux@gmail.com>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhang Xiong <xiong.y.zhang@intel.com>
Cc: Lv Zhiyuan <zhiyuan.lv@intel.com>
Cc: Dapeng Mi <dapeng1.mi@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Acked-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20240307005833.827147-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/vmx/vmx.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7858,8 +7858,28 @@ static u64 vmx_get_perf_capabilities(voi
if (vmx_pebs_supported()) {
perf_cap |= host_perf_cap & PERF_CAP_PEBS_MASK;
- if ((perf_cap & PERF_CAP_PEBS_FORMAT) < 4)
- perf_cap &= ~PERF_CAP_PEBS_BASELINE;
+
+ /*
+ * Disallow adaptive PEBS as it is functionally broken, can be
+ * used by the guest to read *host* LBRs, and can be used to
+ * bypass userspace event filters. To correctly and safely
+ * support adaptive PEBS, KVM needs to:
+ *
+ * 1. Account for the ADAPTIVE flag when (re)programming fixed
+ * counters.
+ *
+ * 2. Gain support from perf (or take direct control of counter
+ * programming) to support events without adaptive PEBS
+ * enabled for the hardware counter.
+ *
+ * 3. Ensure LBR MSRs cannot hold host data on VM-Entry with
+ * adaptive PEBS enabled and MSR_PEBS_DATA_CFG.LBRS=1.
+ *
+ * 4. Document which PMU events are effectively exposed to the
+ * guest via adaptive PEBS, and make adaptive PEBS mutually
+ * exclusive with KVM_SET_PMU_EVENT_FILTER if necessary.
+ */
+ perf_cap &= ~PERF_CAP_PEBS_BASELINE;
}
return perf_cap;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 131/158] KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (129 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 130/158] KVM: x86/pmu: Disable support for adaptive PEBS Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 132/158] KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status Greg Kroah-Hartman
` (35 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sandipan Das, Jim Mattson,
Sean Christopherson, Paolo Bonzini
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sandipan Das <sandipan.das@amd.com>
commit 49ff3b4aec51e3abfc9369997cc603319b02af9a upstream.
On AMD and Hygon platforms, the local APIC does not automatically set
the mask bit of the LVTPC register when handling a PMI and there is
no need to clear it in the kernel's PMI handler.
For guests, the mask bit is currently set by kvm_apic_local_deliver()
and unless it is cleared by the guest kernel's PMI handler, PMIs stop
arriving and break use-cases like sampling with perf record.
This does not affect non-PerfMonV2 guests because PMIs are handled in
the guest kernel by x86_pmu_handle_irq() which always clears the LVTPC
mask bit irrespective of the vendor.
Before:
$ perf record -e cycles:u true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (1 samples) ]
After:
$ perf record -e cycles:u true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (19 samples) ]
Fixes: a16eb25b09c0 ("KVM: x86: Mask LVTPC when handling a PMI")
Cc: stable@vger.kernel.org
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
[sean: use is_intel_compatible instead of !is_amd_or_hygon()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/lapic.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2772,7 +2772,8 @@ int kvm_apic_local_deliver(struct kvm_la
trig_mode = reg & APIC_LVT_LEVEL_TRIGGER;
r = __apic_accept_irq(apic, mode, vector, 1, trig_mode, NULL);
- if (r && lvt_type == APIC_LVTPC)
+ if (r && lvt_type == APIC_LVTPC &&
+ guest_cpuid_is_intel_compatible(apic->vcpu))
kvm_lapic_set_reg(apic, APIC_LVTPC, reg | APIC_LVT_MASKED);
return r;
}
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 132/158] KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (130 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 131/158] KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 133/158] arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H Greg Kroah-Hartman
` (34 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+900d58a45dcaab9e4821,
Vipin Sharma, Sean Christopherson, David Matlack
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Matlack <dmatlack@google.com>
commit 2673dfb591a359c75080dd5af3da484b89320d22 upstream.
Check kvm_mmu_page_ad_need_write_protect() when deciding whether to
write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU
accounts for any role-specific reasons for disabling D-bit dirty logging.
Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is
being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled.
KVM always disables PML when running L2, even when L1 and L2 GPAs are in
the some domain, so failing to write-protect TDP MMU SPTEs will cause
writes made by L2 to not be reflected in the dirty log.
Reported-by: syzbot+900d58a45dcaab9e4821@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=900d58a45dcaab9e4821
Fixes: 5982a5392663 ("KVM: x86/mmu: Use kvm_ad_enabled() to determine if TDP MMU SPTEs need wrprot")
Cc: stable@vger.kernel.org
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-2-dmatlack@google.com
[sean: massage shortlog and changelog, tweak ternary op formatting]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/mmu/tdp_mmu.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -1506,6 +1506,16 @@ void kvm_tdp_mmu_try_split_huge_pages(st
}
}
+static bool tdp_mmu_need_write_protect(struct kvm_mmu_page *sp)
+{
+ /*
+ * All TDP MMU shadow pages share the same role as their root, aside
+ * from level, so it is valid to key off any shadow page to determine if
+ * write protection is needed for an entire tree.
+ */
+ return kvm_mmu_page_ad_need_write_protect(sp) || !kvm_ad_enabled();
+}
+
/*
* Clear the dirty status of all the SPTEs mapping GFNs in the memslot. If
* AD bits are enabled, this will involve clearing the dirty bit on each SPTE.
@@ -1516,7 +1526,8 @@ void kvm_tdp_mmu_try_split_huge_pages(st
static bool clear_dirty_gfn_range(struct kvm *kvm, struct kvm_mmu_page *root,
gfn_t start, gfn_t end)
{
- u64 dbit = kvm_ad_enabled() ? shadow_dirty_mask : PT_WRITABLE_MASK;
+ const u64 dbit = tdp_mmu_need_write_protect(root) ? PT_WRITABLE_MASK :
+ shadow_dirty_mask;
struct tdp_iter iter;
bool spte_set = false;
@@ -1530,7 +1541,7 @@ retry:
if (!is_shadow_present_pte(iter.old_spte))
continue;
- KVM_MMU_WARN_ON(kvm_ad_enabled() &&
+ KVM_MMU_WARN_ON(dbit == shadow_dirty_mask &&
spte_ad_need_write_protect(iter.old_spte));
if (!(iter.old_spte & dbit))
@@ -1578,8 +1589,8 @@ bool kvm_tdp_mmu_clear_dirty_slot(struct
static void clear_dirty_pt_masked(struct kvm *kvm, struct kvm_mmu_page *root,
gfn_t gfn, unsigned long mask, bool wrprot)
{
- u64 dbit = (wrprot || !kvm_ad_enabled()) ? PT_WRITABLE_MASK :
- shadow_dirty_mask;
+ const u64 dbit = (wrprot || tdp_mmu_need_write_protect(root)) ? PT_WRITABLE_MASK :
+ shadow_dirty_mask;
struct tdp_iter iter;
lockdep_assert_held_write(&kvm->mmu_lock);
@@ -1591,7 +1602,7 @@ static void clear_dirty_pt_masked(struct
if (!mask)
break;
- KVM_MMU_WARN_ON(kvm_ad_enabled() &&
+ KVM_MMU_WARN_ON(dbit == shadow_dirty_mask &&
spte_ad_need_write_protect(iter.old_spte));
if (iter.level > PG_LEVEL_4K ||
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 133/158] arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (131 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 132/158] KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 134/158] arm64: hibernate: Fix level3 translation fault in swsusp_save() Greg Kroah-Hartman
` (33 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Ard Biesheuvel, Mark Rutland,
Marc Zyngier, Catalin Marinas
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <ardb@kernel.org>
commit 34e526cb7d46726b2ae5f83f2892d00ebb088509 upstream.
Even though the boot protocol stipulates otherwise, an exception has
been made for the EFI stub, and entering the core kernel with the MMU
enabled is permitted. This allows a substantial amount of cache
maintenance to be elided, wich is significant when fast boot times are
critical (e.g., for booting micro-VMs)
Once the initial ID map has been populated, the MMU is disabled as part
of the logic sequence that puts all system registers into a known state.
Any code that needs to execute within the window where the MMU is off is
cleaned to the PoC explicitly, which includes all of HYP text when
entering at EL2.
However, the current sequence of initializing the EL2 system registers
is not safe: HCR_EL2 is set to its nVHE initial state before SCTLR_EL2
is reprogrammed, and this means that a VHE-to-nVHE switch may occur
while the MMU is enabled. This switch causes some system registers as
well as page table descriptors to be interpreted in a different way,
potentially resulting in spurious exceptions relating to MMU
translation.
So disable the MMU explicitly first when entering in EL2 with the MMU
and caches enabled.
Fixes: 617861703830 ("efi: arm64: enter with MMU and caches enabled")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240415075412.2347624-6-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/kernel/head.S | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -569,6 +569,11 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
adr_l x1, __hyp_text_end
adr_l x2, dcache_clean_poc
blr x2
+
+ mov_q x0, INIT_SCTLR_EL2_MMU_OFF
+ pre_disable_mmu_workaround
+ msr sctlr_el2, x0
+ isb
0:
mov_q x0, HCR_HOST_NVHE_FLAGS
msr hcr_el2, x0
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 134/158] arm64: hibernate: Fix level3 translation fault in swsusp_save()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (132 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 133/158] arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 135/158] init/main.c: Fix potential static_command_line memory overflow Greg Kroah-Hartman
` (32 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Mike Rapoport, Catalin Marinas,
xiongxin, Yaxiong Tian
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yaxiong Tian <tianyaxiong@kylinos.cn>
commit 50449ca66cc5a8cbc64749cf4b9f3d3fc5f4b457 upstream.
On arm64 machines, swsusp_save() faults if it attempts to access
MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI
when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n:
Unable to handle kernel paging request at virtual address ffffff8000000000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000
[ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm
CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76
Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0
Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021
pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : swsusp_save+0x280/0x538
lr : swsusp_save+0x280/0x538
sp : ffffffa034a3fa40
x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000
x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000
x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2
x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000
x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666
x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea
x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0
x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001
x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e
Call trace:
swsusp_save+0x280/0x538
swsusp_arch_suspend+0x148/0x190
hibernation_snapshot+0x240/0x39c
hibernate+0xc4/0x378
state_store+0xf0/0x10c
kobj_attr_store+0x14/0x24
The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable()
-> kernel_page_present() assuming that a page is always present when
can_set_direct_map() is false (all of rodata_full,
debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false),
irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions
should not be saved during hibernation.
This problem was introduced by changes to the pfn_valid() logic in
commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify
pfn_valid()").
Similar to other architectures, drop the !can_set_direct_map() check in
kernel_page_present() so that page_is_savable() skips such pages.
Fixes: a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()")
Cc: <stable@vger.kernel.org> # 5.14.x
Suggested-by: Mike Rapoport <rppt@kernel.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: xiongxin <xiongxin@kylinos.cn>
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240417025248.386622-1-tianyaxiong@kylinos.cn
[catalin.marinas@arm.com: rework commit message]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/mm/pageattr.c | 3 ---
1 file changed, 3 deletions(-)
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -219,9 +219,6 @@ bool kernel_page_present(struct page *pa
pte_t *ptep;
unsigned long addr = (unsigned long)page_address(page);
- if (!can_set_direct_map())
- return true;
-
pgdp = pgd_offset_k(addr);
if (pgd_none(READ_ONCE(*pgdp)))
return false;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 135/158] init/main.c: Fix potential static_command_line memory overflow
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (133 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 134/158] arm64: hibernate: Fix level3 translation fault in swsusp_save() Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 136/158] mm/userfaultfd: allow hugetlb change protection upon poison entry Greg Kroah-Hartman
` (31 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Yuntao Wang, Masami Hiramatsu (Google)
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuntao Wang <ytcoode@gmail.com>
commit 46dad3c1e57897ab9228332f03e1c14798d2d3b9 upstream.
We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for
static_command_line, but the strings copied into static_command_line are
extra_command_line and command_line, rather than extra_command_line and
boot_command_line.
When strlen(command_line) > strlen(boot_command_line), static_command_line
will overflow.
This patch just recovers strlen(command_line) which was miss-consolidated
with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add
checks for the return value of memblock_alloc*()")
Link: https://lore.kernel.org/all/20240412081733.35925-2-ytcoode@gmail.com/
Fixes: f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")
Cc: stable@vger.kernel.org
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
init/main.c | 2 ++
1 file changed, 2 insertions(+)
--- a/init/main.c
+++ b/init/main.c
@@ -630,6 +630,8 @@ static void __init setup_command_line(ch
if (!saved_command_line)
panic("%s: Failed to allocate %zu bytes\n", __func__, len + ilen);
+ len = xlen + strlen(command_line) + 1;
+
static_command_line = memblock_alloc(len, SMP_CACHE_BYTES);
if (!static_command_line)
panic("%s: Failed to allocate %zu bytes\n", __func__, len);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 136/158] mm/userfaultfd: allow hugetlb change protection upon poison entry
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (134 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 135/158] init/main.c: Fix potential static_command_line memory overflow Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 137/158] mm,swapops: update check in is_pfn_swap_entry for hwpoison entries Greg Kroah-Hartman
` (30 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Peter Xu,
syzbot+b07c8ac8eee3d4d8440f, David Hildenbrand, Axel Rasmussen,
Andrew Morton
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Xu <peterx@redhat.com>
commit c5977c95dff182d6ee06f4d6f60bcb0284912969 upstream.
After UFFDIO_POISON, there can be two kinds of hugetlb pte markers, either
the POISON one or UFFD_WP one.
Allow change protection to run on a poisoned marker just like !hugetlb
cases, ignoring the marker irrelevant of the permission.
Here the two bits are mutual exclusive. For example, when install a
poisoned entry it must not be UFFD_WP already (by checking pte_none()
before such install). And it also means if UFFD_WP is set there must have
no POISON bit set. It makes sense because UFFD_WP is a bit to reflect
permission, and permissions do not apply if the pte is poisoned and
destined to sigbus.
So here we simply check uffd_wp bit set first, do nothing otherwise.
Attach the Fixes to UFFDIO_POISON work, as before that it should not be
possible to have poison entry for hugetlb (e.g., hugetlb doesn't do swap,
so no chance of swapin errors).
Link: https://lkml.kernel.org/r/20240405231920.1772199-1-peterx@redhat.com
Link: https://lore.kernel.org/r/000000000000920d5e0615602dd1@google.com
Fixes: fc71884a5f59 ("mm: userfaultfd: add new UFFDIO_POISON ioctl")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+b07c8ac8eee3d4d8440f@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/hugetlb.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -6653,9 +6653,13 @@ long hugetlb_change_protection(struct vm
if (!pte_same(pte, newpte))
set_huge_pte_at(mm, address, ptep, newpte, psize);
} else if (unlikely(is_pte_marker(pte))) {
- /* No other markers apply for now. */
- WARN_ON_ONCE(!pte_marker_uffd_wp(pte));
- if (uffd_wp_resolve)
+ /*
+ * Do nothing on a poison marker; page is
+ * corrupted, permissons do not apply. Here
+ * pte_marker_uffd_wp()==true implies !poison
+ * because they're mutual exclusive.
+ */
+ if (pte_marker_uffd_wp(pte) && uffd_wp_resolve)
/* Safe to modify directly (non-present->none). */
huge_pte_clear(mm, address, ptep, psize);
} else if (!huge_pte_none(pte)) {
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 137/158] mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (135 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 136/158] mm/userfaultfd: allow hugetlb change protection upon poison entry Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 138/158] mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled Greg Kroah-Hartman
` (29 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Oscar Salvador, Tony Luck, Peter Xu,
David Hildenbrand, Miaohe Lin, Andrew Morton
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oscar Salvador <osalvador@suse.de>
commit 07a57a338adb6ec9e766d6a6790f76527f45ceb5 upstream.
Tony reported that the Machine check recovery was broken in v6.9-rc1, as
he was hitting a VM_BUG_ON when injecting uncorrectable memory errors to
DRAM.
After some more digging and debugging on his side, he realized that this
went back to v6.1, with the introduction of 'commit 0d206b5d2e0d
("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")'. That
commit, among other things, introduced swp_offset_pfn(), replacing
hwpoison_entry_to_pfn() in its favour.
The patch also introduced a VM_BUG_ON() check for is_pfn_swap_entry(), but
is_pfn_swap_entry() never got updated to cover hwpoison entries, which
means that we would hit the VM_BUG_ON whenever we would call
swp_offset_pfn() for such entries on environments with CONFIG_DEBUG_VM
set. Fix this by updating the check to cover hwpoison entries as well,
and update the comment while we are it.
Link: https://lkml.kernel.org/r/20240407130537.16977-1-osalvador@suse.de
Fixes: 0d206b5d2e0d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/all/Zg8kLSl2yAlA3o5D@agluck-desk3/
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org> [6.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/swapops.h | 65 ++++++++++++++++++++++++------------------------
1 file changed, 33 insertions(+), 32 deletions(-)
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -390,6 +390,35 @@ static inline bool is_migration_entry_di
}
#endif /* CONFIG_MIGRATION */
+#ifdef CONFIG_MEMORY_FAILURE
+
+/*
+ * Support for hardware poisoned pages
+ */
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+ BUG_ON(!PageLocked(page));
+ return swp_entry(SWP_HWPOISON, page_to_pfn(page));
+}
+
+static inline int is_hwpoison_entry(swp_entry_t entry)
+{
+ return swp_type(entry) == SWP_HWPOISON;
+}
+
+#else
+
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+ return swp_entry(0, 0);
+}
+
+static inline int is_hwpoison_entry(swp_entry_t swp)
+{
+ return 0;
+}
+#endif
+
typedef unsigned long pte_marker;
#define PTE_MARKER_UFFD_WP BIT(0)
@@ -470,8 +499,9 @@ static inline struct page *pfn_swap_entr
/*
* A pfn swap entry is a special type of swap entry that always has a pfn stored
- * in the swap offset. They are used to represent unaddressable device memory
- * and to restrict access to a page undergoing migration.
+ * in the swap offset. They can either be used to represent unaddressable device
+ * memory, to restrict access to a page undergoing migration or to represent a
+ * pfn which has been hwpoisoned and unmapped.
*/
static inline bool is_pfn_swap_entry(swp_entry_t entry)
{
@@ -479,7 +509,7 @@ static inline bool is_pfn_swap_entry(swp
BUILD_BUG_ON(SWP_TYPE_SHIFT < SWP_PFN_BITS);
return is_migration_entry(entry) || is_device_private_entry(entry) ||
- is_device_exclusive_entry(entry);
+ is_device_exclusive_entry(entry) || is_hwpoison_entry(entry);
}
struct page_vma_mapped_walk;
@@ -548,35 +578,6 @@ static inline int is_pmd_migration_entry
}
#endif /* CONFIG_ARCH_ENABLE_THP_MIGRATION */
-#ifdef CONFIG_MEMORY_FAILURE
-
-/*
- * Support for hardware poisoned pages
- */
-static inline swp_entry_t make_hwpoison_entry(struct page *page)
-{
- BUG_ON(!PageLocked(page));
- return swp_entry(SWP_HWPOISON, page_to_pfn(page));
-}
-
-static inline int is_hwpoison_entry(swp_entry_t entry)
-{
- return swp_type(entry) == SWP_HWPOISON;
-}
-
-#else
-
-static inline swp_entry_t make_hwpoison_entry(struct page *page)
-{
- return swp_entry(0, 0);
-}
-
-static inline int is_hwpoison_entry(swp_entry_t swp)
-{
- return 0;
-}
-#endif
-
static inline int non_swap_entry(swp_entry_t entry)
{
return swp_type(entry) >= MAX_SWAPFILES;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 138/158] mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (136 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 137/158] mm,swapops: update check in is_pfn_swap_entry for hwpoison entries Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 139/158] mm/shmem: inline shmem_is_huge() for disabled transparent hugepages Greg Kroah-Hartman
` (28 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Miaohe Lin, Oscar Salvador,
Jane Chu, Naoya Horiguchi, Andrew Morton
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miaohe Lin <linmiaohe@huawei.com>
commit 1983184c22dd84a4d95a71e5c6775c2638557dc7 upstream.
When I did hard offline test with hugetlb pages, below deadlock occurs:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-11409-gf6cef5f8c37f #1 Not tainted
------------------------------------------------------
bash/46904 is trying to acquire lock:
ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60
but task is already holding lock:
ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (pcp_batch_high_lock){+.+.}-{3:3}:
__mutex_lock+0x6c/0x770
page_alloc_cpu_online+0x3c/0x70
cpuhp_invoke_callback+0x397/0x5f0
__cpuhp_invoke_callback_range+0x71/0xe0
_cpu_up+0xeb/0x210
cpu_up+0x91/0xe0
cpuhp_bringup_mask+0x49/0xb0
bringup_nonboot_cpus+0xb7/0xe0
smp_init+0x25/0xa0
kernel_init_freeable+0x15f/0x3e0
kernel_init+0x15/0x1b0
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1298/0x1cd0
lock_acquire+0xc0/0x2b0
cpus_read_lock+0x2a/0xc0
static_key_slow_dec+0x16/0x60
__hugetlb_vmemmap_restore_folio+0x1b9/0x200
dissolve_free_huge_page+0x211/0x260
__page_handle_poison+0x45/0xc0
memory_failure+0x65e/0xc70
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xca/0x1e0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pcp_batch_high_lock);
lock(cpu_hotplug_lock);
lock(pcp_batch_high_lock);
rlock(cpu_hotplug_lock);
*** DEADLOCK ***
5 locks held by bash/46904:
#0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0
#1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0
#2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0
#3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70
#4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40
stack backtrace:
CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
check_noncircular+0x129/0x140
__lock_acquire+0x1298/0x1cd0
lock_acquire+0xc0/0x2b0
cpus_read_lock+0x2a/0xc0
static_key_slow_dec+0x16/0x60
__hugetlb_vmemmap_restore_folio+0x1b9/0x200
dissolve_free_huge_page+0x211/0x260
__page_handle_poison+0x45/0xc0
memory_failure+0x65e/0xc70
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xca/0x1e0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fc862314887
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887
RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001
RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00
In short, below scene breaks the lock dependency chain:
memory_failure
__page_handle_poison
zone_pcp_disable -- lock(pcp_batch_high_lock)
dissolve_free_huge_page
__hugetlb_vmemmap_restore_folio
static_key_slow_dec
cpus_read_lock -- rlock(cpu_hotplug_lock)
Fix this by calling drain_all_pages() instead.
This issue won't occur until commit a6b40850c442 ("mm: hugetlb: replace
hugetlb_free_vmemmap_enabled with a static_key"). As it introduced
rlock(cpu_hotplug_lock) in dissolve_free_huge_page() code path while
lock(pcp_batch_high_lock) is already in the __page_handle_poison().
[linmiaohe@huawei.com: extend comment per Oscar]
[akpm@linux-foundation.org: reflow block comment]
Link: https://lkml.kernel.org/r/20240407085456.2798193-1-linmiaohe@huawei.com
Fixes: a6b40850c442 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memory-failure.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -154,11 +154,23 @@ static int __page_handle_poison(struct p
{
int ret;
- zone_pcp_disable(page_zone(page));
+ /*
+ * zone_pcp_disable() can't be used here. It will
+ * hold pcp_batch_high_lock and dissolve_free_huge_page() might hold
+ * cpu_hotplug_lock via static_key_slow_dec() when hugetlb vmemmap
+ * optimization is enabled. This will break current lock dependency
+ * chain and leads to deadlock.
+ * Disabling pcp before dissolving the page was a deterministic
+ * approach because we made sure that those pages cannot end up in any
+ * PCP list. Draining PCP lists expels those pages to the buddy system,
+ * but nothing guarantees that those pages do not get back to a PCP
+ * queue if we need to refill those.
+ */
ret = dissolve_free_huge_page(page);
- if (!ret)
+ if (!ret) {
+ drain_all_pages(page_zone(page));
ret = take_page_off_buddy(page);
- zone_pcp_enable(page_zone(page));
+ }
return ret;
}
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 139/158] mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (137 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 138/158] mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 140/158] fuse: fix leaked ENOSYS error on first statx call Greg Kroah-Hartman
` (27 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Sumanth Korikkar, David Hildenbrand,
Alexander Gordeev, Heiko Carstens, Hugh Dickins,
Ilya Leoshkevich, Vasily Gorbik, Andrew Morton
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sumanth Korikkar <sumanthk@linux.ibm.com>
commit 1f737846aa3c45f07a06fa0d018b39e1afb8084a upstream.
In order to minimize code size (CONFIG_CC_OPTIMIZE_FOR_SIZE=y),
compiler might choose to make a regular function call (out-of-line) for
shmem_is_huge() instead of inlining it. When transparent hugepages are
disabled (CONFIG_TRANSPARENT_HUGEPAGE=n), it can cause compilation
error.
mm/shmem.c: In function `shmem_getattr':
./include/linux/huge_mm.h:383:27: note: in expansion of macro `BUILD_BUG'
383 | #define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; })
| ^~~~~~~~~
mm/shmem.c:1148:33: note: in expansion of macro `HPAGE_PMD_SIZE'
1148 | stat->blksize = HPAGE_PMD_SIZE;
To prevent the possible error, always inline shmem_is_huge() when
transparent hugepages are disabled.
Link: https://lkml.kernel.org/r/20240409155407.2322714-1-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/shmem_fs.h | 9 +++++++++
mm/shmem.c | 6 ------
2 files changed, 9 insertions(+), 6 deletions(-)
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -110,8 +110,17 @@ extern struct page *shmem_read_mapping_p
extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end);
int shmem_unuse(unsigned int type);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern bool shmem_is_huge(struct inode *inode, pgoff_t index, bool shmem_huge_force,
struct mm_struct *mm, unsigned long vm_flags);
+#else
+static __always_inline bool shmem_is_huge(struct inode *inode, pgoff_t index, bool shmem_huge_force,
+ struct mm_struct *mm, unsigned long vm_flags)
+{
+ return false;
+}
+#endif
+
#ifdef CONFIG_SHMEM
extern unsigned long shmem_swap_usage(struct vm_area_struct *vma);
#else
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -742,12 +742,6 @@ static long shmem_unused_huge_count(stru
#define shmem_huge SHMEM_HUGE_DENY
-bool shmem_is_huge(struct inode *inode, pgoff_t index, bool shmem_huge_force,
- struct mm_struct *mm, unsigned long vm_flags)
-{
- return false;
-}
-
static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo,
struct shrink_control *sc, unsigned long nr_to_split)
{
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 140/158] fuse: fix leaked ENOSYS error on first statx call
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (138 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 139/158] mm/shmem: inline shmem_is_huge() for disabled transparent hugepages Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 141/158] drm/amdgpu: validate the parameters of bo mapping operations more clearly Greg Kroah-Hartman
` (26 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Danny Lin, Miklos Szeredi
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Danny Lin <danny@orbstack.dev>
commit eb4b691b9115fae4c844f5941418335575cf667f upstream.
FUSE attempts to detect server support for statx by trying it once and
setting no_statx=1 if it fails with ENOSYS, but consider the following
scenario:
- Userspace (e.g. sh) calls stat() on a file
* succeeds
- Userspace (e.g. lsd) calls statx(BTIME) on the same file
- request_mask = STATX_BASIC_STATS | STATX_BTIME
- first pass: sync=true due to differing cache_mask
- statx fails and returns ENOSYS
- set no_statx and retry
- retry sets mask = STATX_BASIC_STATS
- now mask == cache_mask; sync=false (time_before: still valid)
- so we take the "else if (stat)" path
- "err" is still ENOSYS from the failed statx call
Fix this by zeroing "err" before retrying the failed call.
Fixes: d3045530bdd2 ("fuse: implement statx")
Cc: stable@vger.kernel.org # v6.6
Signed-off-by: Danny Lin <danny@orbstack.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/fuse/dir.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1317,6 +1317,7 @@ retry:
err = fuse_do_statx(inode, file, stat);
if (err == -ENOSYS) {
fc->no_statx = 1;
+ err = 0;
goto retry;
}
} else {
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 141/158] drm/amdgpu: validate the parameters of bo mapping operations more clearly
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (139 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 140/158] fuse: fix leaked ENOSYS error on first statx call Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 142/158] drm/amdkfd: Fix memory leak in create_process failure Greg Kroah-Hartman
` (25 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Vlad Stolyarov,
Christian König, xinhui pan, Alex Deucher
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: xinhui pan <xinhui.pan@amd.com>
commit 6fef2d4c00b5b8561ad68dd2b68173f5c6af1e75 upstream.
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.
Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2")
Cc: stable@vger.kernel.org
Reported-by: Vlad Stolyarov <hexed@google.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 72 +++++++++++++++++++++------------
1 file changed, 46 insertions(+), 26 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -1500,6 +1500,37 @@ static void amdgpu_vm_bo_insert_map(stru
trace_amdgpu_vm_bo_map(bo_va, mapping);
}
+/* Validate operation parameters to prevent potential abuse */
+static int amdgpu_vm_verify_parameters(struct amdgpu_device *adev,
+ struct amdgpu_bo *bo,
+ uint64_t saddr,
+ uint64_t offset,
+ uint64_t size)
+{
+ uint64_t tmp, lpfn;
+
+ if (saddr & AMDGPU_GPU_PAGE_MASK
+ || offset & AMDGPU_GPU_PAGE_MASK
+ || size & AMDGPU_GPU_PAGE_MASK)
+ return -EINVAL;
+
+ if (check_add_overflow(saddr, size, &tmp)
+ || check_add_overflow(offset, size, &tmp)
+ || size == 0 /* which also leads to end < begin */)
+ return -EINVAL;
+
+ /* make sure object fit at this offset */
+ if (bo && offset + size > amdgpu_bo_size(bo))
+ return -EINVAL;
+
+ /* Ensure last pfn not exceed max_pfn */
+ lpfn = (saddr + size - 1) >> AMDGPU_GPU_PAGE_SHIFT;
+ if (lpfn >= adev->vm_manager.max_pfn)
+ return -EINVAL;
+
+ return 0;
+}
+
/**
* amdgpu_vm_bo_map - map bo inside a vm
*
@@ -1526,21 +1557,14 @@ int amdgpu_vm_bo_map(struct amdgpu_devic
struct amdgpu_bo *bo = bo_va->base.bo;
struct amdgpu_vm *vm = bo_va->base.vm;
uint64_t eaddr;
+ int r;
- /* validate the parameters */
- if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK)
- return -EINVAL;
- if (saddr + size <= saddr || offset + size <= offset)
- return -EINVAL;
-
- /* make sure object fit at this offset */
- eaddr = saddr + size - 1;
- if ((bo && offset + size > amdgpu_bo_size(bo)) ||
- (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT))
- return -EINVAL;
+ r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size);
+ if (r)
+ return r;
saddr /= AMDGPU_GPU_PAGE_SIZE;
- eaddr /= AMDGPU_GPU_PAGE_SIZE;
+ eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE;
tmp = amdgpu_vm_it_iter_first(&vm->va, saddr, eaddr);
if (tmp) {
@@ -1593,17 +1617,9 @@ int amdgpu_vm_bo_replace_map(struct amdg
uint64_t eaddr;
int r;
- /* validate the parameters */
- if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK)
- return -EINVAL;
- if (saddr + size <= saddr || offset + size <= offset)
- return -EINVAL;
-
- /* make sure object fit at this offset */
- eaddr = saddr + size - 1;
- if ((bo && offset + size > amdgpu_bo_size(bo)) ||
- (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT))
- return -EINVAL;
+ r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size);
+ if (r)
+ return r;
/* Allocate all the needed memory */
mapping = kmalloc(sizeof(*mapping), GFP_KERNEL);
@@ -1617,7 +1633,7 @@ int amdgpu_vm_bo_replace_map(struct amdg
}
saddr /= AMDGPU_GPU_PAGE_SIZE;
- eaddr /= AMDGPU_GPU_PAGE_SIZE;
+ eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE;
mapping->start = saddr;
mapping->last = eaddr;
@@ -1704,10 +1720,14 @@ int amdgpu_vm_bo_clear_mappings(struct a
struct amdgpu_bo_va_mapping *before, *after, *tmp, *next;
LIST_HEAD(removed);
uint64_t eaddr;
+ int r;
+
+ r = amdgpu_vm_verify_parameters(adev, NULL, saddr, 0, size);
+ if (r)
+ return r;
- eaddr = saddr + size - 1;
saddr /= AMDGPU_GPU_PAGE_SIZE;
- eaddr /= AMDGPU_GPU_PAGE_SIZE;
+ eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE;
/* Allocate all the needed memory */
before = kzalloc(sizeof(*before), GFP_KERNEL);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 142/158] drm/amdkfd: Fix memory leak in create_process failure
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (140 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 141/158] drm/amdgpu: validate the parameters of bo mapping operations more clearly Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 143/158] drm/amdgpu: remove invalid resource->start check v2 Greg Kroah-Hartman
` (24 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Xiaogang Chen, Felix Kuehling,
Harish Kasiviswanthan, Mukul Joshi, Alex Deucher
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Kuehling <felix.kuehling@amd.com>
commit 18921b205012568b45760753ad3146ddb9e2d4e2 upstream.
Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.
Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable")
CC: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
@@ -818,9 +818,9 @@ struct kfd_process *kfd_create_process(s
mutex_lock(&kfd_processes_mutex);
if (kfd_is_locked()) {
- mutex_unlock(&kfd_processes_mutex);
pr_debug("KFD is locked! Cannot create process");
- return ERR_PTR(-EINVAL);
+ process = ERR_PTR(-EINVAL);
+ goto out;
}
/* A prior open of /dev/kfd could have already created the process. */
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 143/158] drm/amdgpu: remove invalid resource->start check v2
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (141 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 142/158] drm/amdkfd: Fix memory leak in create_process failure Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 144/158] drm/vmwgfx: Fix prime import/export Greg Kroah-Hartman
` (23 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Christian König,
Pierre-Eric Pelloux-Prayer, Alex Deucher
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian König <christian.koenig@amd.com>
commit ca7c4507ba87e9fc22e0ecfa819c3664b3e8287b upstream.
The majority of those where removed in the commit aed01a68047b
("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
But this one was missed because it's working on the resource and not the
BO. Since we also no longer use a fake start address for visible BOs
this will now trigger invalid mapping errors.
v2: also remove the unused variable
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
CC: stable@vger.kernel.org
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -562,7 +562,6 @@ static int amdgpu_ttm_io_mem_reserve(str
struct ttm_resource *mem)
{
struct amdgpu_device *adev = amdgpu_ttm_adev(bdev);
- size_t bus_size = (size_t)mem->size;
switch (mem->mem_type) {
case TTM_PL_SYSTEM:
@@ -573,9 +572,6 @@ static int amdgpu_ttm_io_mem_reserve(str
break;
case TTM_PL_VRAM:
mem->bus.offset = mem->start << PAGE_SHIFT;
- /* check if it's visible */
- if ((mem->bus.offset + bus_size) > adev->gmc.visible_vram_size)
- return -EINVAL;
if (adev->mman.aper_base_kaddr &&
mem->placement & TTM_PL_FLAG_CONTIGUOUS)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 144/158] drm/vmwgfx: Fix prime import/export
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (142 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 143/158] drm/amdgpu: remove invalid resource->start check v2 Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 145/158] drm/vmwgfx: Sort primary plane formats by order of preference Greg Kroah-Hartman
` (22 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Zack Rusin, Martin Krastev
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zack Rusin <zack.rusin@broadcom.com>
commit b32233accefff1338806f064fb9b62cf5bc0609f upstream.
vmwgfx never supported prime import of external buffers. Furthermore the
driver exposes two different objects to userspace: vmw_surface's and
gem buffers but prime import/export only worked with vmw_surfaces.
Because gem buffers are used through the dumb_buffer interface this meant
that the driver created buffers couldn't have been prime exported or
imported.
Fix prime import/export. Makes IGT's kms_prime pass.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-4-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/vmwgfx/vmwgfx_blit.c | 35 +++++++++++++++++++++--
drivers/gpu/drm/vmwgfx/vmwgfx_bo.c | 7 ++--
drivers/gpu/drm/vmwgfx/vmwgfx_bo.h | 2 +
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 1
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 3 +
drivers/gpu/drm/vmwgfx/vmwgfx_gem.c | 32 +++++++++++++++++++++
drivers/gpu/drm/vmwgfx/vmwgfx_prime.c | 15 ++++++++-
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 44 +++++++++++++++++++----------
8 files changed, 117 insertions(+), 22 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c
@@ -456,8 +456,10 @@ int vmw_bo_cpu_blit(struct ttm_buffer_ob
.no_wait_gpu = false
};
u32 j, initial_line = dst_offset / dst_stride;
- struct vmw_bo_blit_line_data d;
+ struct vmw_bo_blit_line_data d = {0};
int ret = 0;
+ struct page **dst_pages = NULL;
+ struct page **src_pages = NULL;
/* Buffer objects need to be either pinned or reserved: */
if (!(dst->pin_count))
@@ -477,12 +479,35 @@ int vmw_bo_cpu_blit(struct ttm_buffer_ob
return ret;
}
+ if (!src->ttm->pages && src->ttm->sg) {
+ src_pages = kvmalloc_array(src->ttm->num_pages,
+ sizeof(struct page *), GFP_KERNEL);
+ if (!src_pages)
+ return -ENOMEM;
+ ret = drm_prime_sg_to_page_array(src->ttm->sg, src_pages,
+ src->ttm->num_pages);
+ if (ret)
+ goto out;
+ }
+ if (!dst->ttm->pages && dst->ttm->sg) {
+ dst_pages = kvmalloc_array(dst->ttm->num_pages,
+ sizeof(struct page *), GFP_KERNEL);
+ if (!dst_pages) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ ret = drm_prime_sg_to_page_array(dst->ttm->sg, dst_pages,
+ dst->ttm->num_pages);
+ if (ret)
+ goto out;
+ }
+
d.mapped_dst = 0;
d.mapped_src = 0;
d.dst_addr = NULL;
d.src_addr = NULL;
- d.dst_pages = dst->ttm->pages;
- d.src_pages = src->ttm->pages;
+ d.dst_pages = dst->ttm->pages ? dst->ttm->pages : dst_pages;
+ d.src_pages = src->ttm->pages ? src->ttm->pages : src_pages;
d.dst_num_pages = PFN_UP(dst->resource->size);
d.src_num_pages = PFN_UP(src->resource->size);
d.dst_prot = ttm_io_prot(dst, dst->resource, PAGE_KERNEL);
@@ -504,6 +529,10 @@ out:
kunmap_atomic(d.src_addr);
if (d.dst_addr)
kunmap_atomic(d.dst_addr);
+ if (src_pages)
+ kvfree(src_pages);
+ if (dst_pages)
+ kvfree(dst_pages);
return ret;
}
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c
@@ -377,7 +377,8 @@ static int vmw_bo_init(struct vmw_privat
{
struct ttm_operation_ctx ctx = {
.interruptible = params->bo_type != ttm_bo_type_kernel,
- .no_wait_gpu = false
+ .no_wait_gpu = false,
+ .resv = params->resv,
};
struct ttm_device *bdev = &dev_priv->bdev;
struct drm_device *vdev = &dev_priv->drm;
@@ -394,8 +395,8 @@ static int vmw_bo_init(struct vmw_privat
vmw_bo_placement_set(vmw_bo, params->domain, params->busy_domain);
ret = ttm_bo_init_reserved(bdev, &vmw_bo->tbo, params->bo_type,
- &vmw_bo->placement, 0, &ctx, NULL,
- NULL, destroy);
+ &vmw_bo->placement, 0, &ctx,
+ params->sg, params->resv, destroy);
if (unlikely(ret))
return ret;
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h
@@ -55,6 +55,8 @@ struct vmw_bo_params {
enum ttm_bo_type bo_type;
size_t size;
bool pin;
+ struct dma_resv *resv;
+ struct sg_table *sg;
};
/**
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1628,6 +1628,7 @@ static const struct drm_driver driver =
.prime_fd_to_handle = vmw_prime_fd_to_handle,
.prime_handle_to_fd = vmw_prime_handle_to_fd,
+ .gem_prime_import_sg_table = vmw_prime_import_sg_table,
.fops = &vmwgfx_driver_fops,
.name = VMWGFX_DRIVER_NAME,
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -1131,6 +1131,9 @@ extern int vmw_prime_handle_to_fd(struct
struct drm_file *file_priv,
uint32_t handle, uint32_t flags,
int *prime_fd);
+struct drm_gem_object *vmw_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *table);
/*
* MemoryOBject management - vmwgfx_mob.c
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c
@@ -149,6 +149,38 @@ out_no_bo:
return ret;
}
+struct drm_gem_object *vmw_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *table)
+{
+ int ret;
+ struct vmw_private *dev_priv = vmw_priv(dev);
+ struct drm_gem_object *gem = NULL;
+ struct vmw_bo *vbo;
+ struct vmw_bo_params params = {
+ .domain = (dev_priv->has_mob) ? VMW_BO_DOMAIN_SYS : VMW_BO_DOMAIN_VRAM,
+ .busy_domain = VMW_BO_DOMAIN_SYS,
+ .bo_type = ttm_bo_type_sg,
+ .size = attach->dmabuf->size,
+ .pin = false,
+ .resv = attach->dmabuf->resv,
+ .sg = table,
+
+ };
+
+ dma_resv_lock(params.resv, NULL);
+
+ ret = vmw_bo_create(dev_priv, ¶ms, &vbo);
+ if (ret != 0)
+ goto out_no_bo;
+
+ vbo->tbo.base.funcs = &vmw_gem_object_funcs;
+
+ gem = &vbo->tbo.base;
+out_no_bo:
+ dma_resv_unlock(params.resv);
+ return gem;
+}
int vmw_gem_object_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_prime.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_prime.c
@@ -75,8 +75,12 @@ int vmw_prime_fd_to_handle(struct drm_de
int fd, u32 *handle)
{
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
+ int ret = ttm_prime_fd_to_handle(tfile, fd, handle);
- return ttm_prime_fd_to_handle(tfile, fd, handle);
+ if (ret)
+ ret = drm_gem_prime_fd_to_handle(dev, file_priv, fd, handle);
+
+ return ret;
}
int vmw_prime_handle_to_fd(struct drm_device *dev,
@@ -85,5 +89,12 @@ int vmw_prime_handle_to_fd(struct drm_de
int *prime_fd)
{
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
- return ttm_prime_handle_to_fd(tfile, handle, flags, prime_fd);
+ int ret;
+
+ if (handle > VMWGFX_NUM_MOB)
+ ret = ttm_prime_handle_to_fd(tfile, handle, flags, prime_fd);
+ else
+ ret = drm_gem_prime_handle_to_fd(dev, file_priv, handle, flags, prime_fd);
+
+ return ret;
}
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c
@@ -220,13 +220,18 @@ static int vmw_ttm_map_dma(struct vmw_tt
switch (dev_priv->map_mode) {
case vmw_dma_map_bind:
case vmw_dma_map_populate:
- vsgt->sgt = &vmw_tt->sgt;
- ret = sg_alloc_table_from_pages_segment(
- &vmw_tt->sgt, vsgt->pages, vsgt->num_pages, 0,
- (unsigned long)vsgt->num_pages << PAGE_SHIFT,
- dma_get_max_seg_size(dev_priv->drm.dev), GFP_KERNEL);
- if (ret)
- goto out_sg_alloc_fail;
+ if (vmw_tt->dma_ttm.page_flags & TTM_TT_FLAG_EXTERNAL) {
+ vsgt->sgt = vmw_tt->dma_ttm.sg;
+ } else {
+ vsgt->sgt = &vmw_tt->sgt;
+ ret = sg_alloc_table_from_pages_segment(&vmw_tt->sgt,
+ vsgt->pages, vsgt->num_pages, 0,
+ (unsigned long)vsgt->num_pages << PAGE_SHIFT,
+ dma_get_max_seg_size(dev_priv->drm.dev),
+ GFP_KERNEL);
+ if (ret)
+ goto out_sg_alloc_fail;
+ }
ret = vmw_ttm_map_for_dma(vmw_tt);
if (unlikely(ret != 0))
@@ -241,8 +246,9 @@ static int vmw_ttm_map_dma(struct vmw_tt
return 0;
out_map_fail:
- sg_free_table(vmw_tt->vsgt.sgt);
- vmw_tt->vsgt.sgt = NULL;
+ drm_warn(&dev_priv->drm, "VSG table map failed!");
+ sg_free_table(vsgt->sgt);
+ vsgt->sgt = NULL;
out_sg_alloc_fail:
return ret;
}
@@ -388,15 +394,17 @@ static void vmw_ttm_destroy(struct ttm_d
static int vmw_ttm_populate(struct ttm_device *bdev,
struct ttm_tt *ttm, struct ttm_operation_ctx *ctx)
{
- int ret;
+ bool external = (ttm->page_flags & TTM_TT_FLAG_EXTERNAL) != 0;
- /* TODO: maybe completely drop this ? */
if (ttm_tt_is_populated(ttm))
return 0;
- ret = ttm_pool_alloc(&bdev->pool, ttm, ctx);
+ if (external && ttm->sg)
+ return drm_prime_sg_to_dma_addr_array(ttm->sg,
+ ttm->dma_address,
+ ttm->num_pages);
- return ret;
+ return ttm_pool_alloc(&bdev->pool, ttm, ctx);
}
static void vmw_ttm_unpopulate(struct ttm_device *bdev,
@@ -404,6 +412,10 @@ static void vmw_ttm_unpopulate(struct tt
{
struct vmw_ttm_tt *vmw_tt = container_of(ttm, struct vmw_ttm_tt,
dma_ttm);
+ bool external = (ttm->page_flags & TTM_TT_FLAG_EXTERNAL) != 0;
+
+ if (external)
+ return;
vmw_ttm_unbind(bdev, ttm);
@@ -422,6 +434,7 @@ static struct ttm_tt *vmw_ttm_tt_create(
{
struct vmw_ttm_tt *vmw_be;
int ret;
+ bool external = bo->type == ttm_bo_type_sg;
vmw_be = kzalloc(sizeof(*vmw_be), GFP_KERNEL);
if (!vmw_be)
@@ -430,7 +443,10 @@ static struct ttm_tt *vmw_ttm_tt_create(
vmw_be->dev_priv = vmw_priv_from_ttm(bo->bdev);
vmw_be->mob = NULL;
- if (vmw_be->dev_priv->map_mode == vmw_dma_alloc_coherent)
+ if (external)
+ page_flags |= TTM_TT_FLAG_EXTERNAL | TTM_TT_FLAG_EXTERNAL_MAPPABLE;
+
+ if (vmw_be->dev_priv->map_mode == vmw_dma_alloc_coherent || external)
ret = ttm_sg_tt_init(&vmw_be->dma_ttm, bo, page_flags,
ttm_cached);
else
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 145/158] drm/vmwgfx: Sort primary plane formats by order of preference
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (143 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 144/158] drm/vmwgfx: Fix prime import/export Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 146/158] drm/vmwgfx: Fix crtcs atomic check conditional Greg Kroah-Hartman
` (21 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zack Rusin,
Broadcom internal kernel review list, dri-devel, Pekka Paalanen
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zack Rusin <zack.rusin@broadcom.com>
commit d4c972bff3129a9dd4c22a3999fd8eba1a81531a upstream.
The table of primary plane formats wasn't sorted at all, leading to
applications picking our least desirable formats by defaults.
Sort the primary plane formats according to our order of preference.
Nice side-effect of this change is that it makes IGT's kms_atomic
plane-invalid-params pass because the test picks the first format
which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes
which make Pixman, which IGT depends on assert due to the fact that our
16bpp formats aren't 32 bit aligned like Pixman requires all formats
to be.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 36cc79bc9077 ("drm/vmwgfx: Add universal plane support")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.12+
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-6-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -243,10 +243,10 @@ struct vmw_framebuffer_bo {
static const uint32_t __maybe_unused vmw_primary_plane_formats[] = {
- DRM_FORMAT_XRGB1555,
- DRM_FORMAT_RGB565,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_XRGB1555,
};
static const uint32_t __maybe_unused vmw_cursor_plane_formats[] = {
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 146/158] drm/vmwgfx: Fix crtcs atomic check conditional
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (144 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 145/158] drm/vmwgfx: Sort primary plane formats by order of preference Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 147/158] nouveau: fix instmem race condition around ptr stores Greg Kroah-Hartman
` (20 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Zack Rusin,
Broadcom internal kernel review list, dri-devel, Ian Forbes,
Martin Krastev
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zack Rusin <zack.rusin@broadcom.com>
commit a60ccade88f926e871a57176e86a34bbf0db0098 upstream.
The conditional was supposed to prevent enabling of a crtc state
without a set primary plane. Accidently it also prevented disabling
crtc state with a set primary plane. Neither is correct.
Fix the conditional and just driver-warn when a crtc state has been
enabled without a primary plane which will help debug broken userspace.
Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 06ec41909e31 ("drm/vmwgfx: Add and connect CRTC helper functions")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-5-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -926,6 +926,7 @@ int vmw_du_cursor_plane_atomic_check(str
int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_atomic_state *state)
{
+ struct vmw_private *vmw = vmw_priv(crtc->dev);
struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state,
crtc);
struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc);
@@ -933,9 +934,13 @@ int vmw_du_crtc_atomic_check(struct drm_
bool has_primary = new_state->plane_mask &
drm_plane_mask(crtc->primary);
- /* We always want to have an active plane with an active CRTC */
- if (has_primary != new_state->enable)
- return -EINVAL;
+ /*
+ * This is fine in general, but broken userspace might expect
+ * some actual rendering so give a clue as why it's blank.
+ */
+ if (new_state->enable && !has_primary)
+ drm_dbg_driver(&vmw->drm,
+ "CRTC without a primary plane will be blank.\n");
if (new_state->connector_mask != connector_mask &&
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 147/158] nouveau: fix instmem race condition around ptr stores
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (145 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 146/158] drm/vmwgfx: Fix crtcs atomic check conditional Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 148/158] bootconfig: use memblock_free_late to free xbc memory to buddy Greg Kroah-Hartman
` (19 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Dave Airlie, Danilo Krummrich
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <airlied@redhat.com>
commit fff1386cc889d8fb4089d285f883f8cba62d82ce upstream.
Running a lot of VK CTS in parallel against nouveau, once every
few hours you might see something like this crash.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1
RSP: 0000:ffffac20c5857838 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001
RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180
RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10
R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c
R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c
FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
...
? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
? gp100_vmm_pgt_mem+0x37/0x180 [nouveau]
nvkm_vmm_iter+0x351/0xa20 [nouveau]
? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
? __lock_acquire+0x3ed/0x2170
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau]
? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
nvkm_vmm_map_locked+0x224/0x3a0 [nouveau]
Adding any sort of useful debug usually makes it go away, so I hand
wrote the function in a line, and debugged the asm.
Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in
the nv50_instobj_acquire called from nvkm_kmap.
If Thread A and Thread B both get to nv50_instobj_acquire around
the same time, and Thread A hits the refcount_set line, and in
lockstep thread B succeeds at refcount_inc_not_zero, there is a
chance the ptrs value won't have been stored since refcount_set
is unordered. Force a memory barrier here, I picked smp_mb, since
we want it on all CPUs and it's write followed by a read.
v2: use paired smp_rmb/smp_wmb.
Cc: <stable@vger.kernel.org>
Fixes: be55287aa5ba ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c
@@ -221,8 +221,11 @@ nv50_instobj_acquire(struct nvkm_memory
void __iomem *map = NULL;
/* Already mapped? */
- if (refcount_inc_not_zero(&iobj->maps))
+ if (refcount_inc_not_zero(&iobj->maps)) {
+ /* read barrier match the wmb on refcount set */
+ smp_rmb();
return iobj->map;
+ }
/* Take the lock, and re-check that another thread hasn't
* already mapped the object in the meantime.
@@ -249,6 +252,8 @@ nv50_instobj_acquire(struct nvkm_memory
iobj->base.memory.ptrs = &nv50_instobj_fast;
else
iobj->base.memory.ptrs = &nv50_instobj_slow;
+ /* barrier to ensure the ptrs are written before refcount is set */
+ smp_wmb();
refcount_set(&iobj->maps, 1);
}
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 148/158] bootconfig: use memblock_free_late to free xbc memory to buddy
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (146 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 147/158] nouveau: fix instmem race condition around ptr stores Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 149/158] nilfs2: fix OOB in nilfs_set_de_type Greg Kroah-Hartman
` (18 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Stable, Qiang Zhang,
Masami Hiramatsu (Google)
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qiang Zhang <qiang4.zhang@intel.com>
commit 89f9a1e876b5a7ad884918c03a46831af202c8a0 upstream.
On the time to free xbc memory in xbc_exit(), memblock may has handed
over memory to buddy allocator. So it doesn't make sense to free memory
back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs
on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86.
Following KASAN logs shows this case.
This patch fixes the xbc memory free problem by calling memblock_free()
in early xbc init error rewind path and calling memblock_free_late() in
xbc exit path to free memory to buddy allocator.
[ 9.410890] ==================================================================
[ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260
[ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1
[ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5
[ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023
[ 9.460789] Call Trace:
[ 9.463518] <TASK>
[ 9.465859] dump_stack_lvl+0x53/0x70
[ 9.469949] print_report+0xce/0x610
[ 9.473944] ? __virt_addr_valid+0xf5/0x1b0
[ 9.478619] ? memblock_isolate_range+0x12d/0x260
[ 9.483877] kasan_report+0xc6/0x100
[ 9.487870] ? memblock_isolate_range+0x12d/0x260
[ 9.493125] memblock_isolate_range+0x12d/0x260
[ 9.498187] memblock_phys_free+0xb4/0x160
[ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10
[ 9.508021] ? mutex_unlock+0x7e/0xd0
[ 9.512111] ? __pfx_mutex_unlock+0x10/0x10
[ 9.516786] ? kernel_init_freeable+0x2d4/0x430
[ 9.521850] ? __pfx_kernel_init+0x10/0x10
[ 9.526426] xbc_exit+0x17/0x70
[ 9.529935] kernel_init+0x38/0x1e0
[ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30
[ 9.538601] ret_from_fork+0x2c/0x50
[ 9.542596] ? __pfx_kernel_init+0x10/0x10
[ 9.547170] ret_from_fork_asm+0x1a/0x30
[ 9.551552] </TASK>
[ 9.555649] The buggy address belongs to the physical page:
[ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30
[ 9.570821] flags: 0x200000000000000(node=0|zone=2)
[ 9.576271] page_type: 0xffffffff()
[ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000
[ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[ 9.597476] page dumped because: kasan: bad access detected
[ 9.605362] Memory state around the buggy address:
[ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.634930] ^
[ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.654675] ==================================================================
Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Stable@vger.kernel.org
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/bootconfig.h | 7 ++++++-
lib/bootconfig.c | 19 +++++++++++--------
2 files changed, 17 insertions(+), 9 deletions(-)
--- a/include/linux/bootconfig.h
+++ b/include/linux/bootconfig.h
@@ -287,7 +287,12 @@ int __init xbc_init(const char *buf, siz
int __init xbc_get_info(int *node_size, size_t *data_size);
/* XBC cleanup data structures */
-void __init xbc_exit(void);
+void __init _xbc_exit(bool early);
+
+static inline void xbc_exit(void)
+{
+ _xbc_exit(false);
+}
/* XBC embedded bootconfig data in kernel */
#ifdef CONFIG_BOOT_CONFIG_EMBED
--- a/lib/bootconfig.c
+++ b/lib/bootconfig.c
@@ -61,9 +61,12 @@ static inline void * __init xbc_alloc_me
return memblock_alloc(size, SMP_CACHE_BYTES);
}
-static inline void __init xbc_free_mem(void *addr, size_t size)
+static inline void __init xbc_free_mem(void *addr, size_t size, bool early)
{
- memblock_free(addr, size);
+ if (early)
+ memblock_free(addr, size);
+ else if (addr)
+ memblock_free_late(__pa(addr), size);
}
#else /* !__KERNEL__ */
@@ -73,7 +76,7 @@ static inline void *xbc_alloc_mem(size_t
return malloc(size);
}
-static inline void xbc_free_mem(void *addr, size_t size)
+static inline void xbc_free_mem(void *addr, size_t size, bool early)
{
free(addr);
}
@@ -904,13 +907,13 @@ static int __init xbc_parse_tree(void)
* If you need to reuse xbc_init() with new boot config, you can
* use this.
*/
-void __init xbc_exit(void)
+void __init _xbc_exit(bool early)
{
- xbc_free_mem(xbc_data, xbc_data_size);
+ xbc_free_mem(xbc_data, xbc_data_size, early);
xbc_data = NULL;
xbc_data_size = 0;
xbc_node_num = 0;
- xbc_free_mem(xbc_nodes, sizeof(struct xbc_node) * XBC_NODE_MAX);
+ xbc_free_mem(xbc_nodes, sizeof(struct xbc_node) * XBC_NODE_MAX, early);
xbc_nodes = NULL;
brace_index = 0;
}
@@ -963,7 +966,7 @@ int __init xbc_init(const char *data, si
if (!xbc_nodes) {
if (emsg)
*emsg = "Failed to allocate bootconfig nodes";
- xbc_exit();
+ _xbc_exit(true);
return -ENOMEM;
}
memset(xbc_nodes, 0, sizeof(struct xbc_node) * XBC_NODE_MAX);
@@ -977,7 +980,7 @@ int __init xbc_init(const char *data, si
*epos = xbc_err_pos;
if (emsg)
*emsg = xbc_err_msg;
- xbc_exit();
+ _xbc_exit(true);
} else
ret = xbc_node_num;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 149/158] nilfs2: fix OOB in nilfs_set_de_type
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (147 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 148/158] bootconfig: use memblock_free_late to free xbc memory to buddy Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 150/158] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530 Greg Kroah-Hartman
` (17 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, syzbot+2e22057de05b9f3b30d8,
Jeongjun Park, Ryusuke Konishi, Andrew Morton
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeongjun Park <aha310510@gmail.com>
commit c4a7dc9523b59b3e73fd522c73e95e072f876b16 upstream.
The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is
defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function,
which uses this array, specifies the index to read from the array in the
same way as "(mode & S_IFMT) >> S_SHIFT".
static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode
*inode)
{
umode_t mode = inode->i_mode;
de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob
}
However, when the index is determined this way, an out-of-bounds (OOB)
error occurs by referring to an index that is 1 larger than the array size
when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a
patch to resize the nilfs_type_by_mode array should be applied to prevent
OOB errors.
Link: https://lkml.kernel.org/r/20240415182048.7144-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+2e22057de05b9f3b30d8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e22057de05b9f3b30d8
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nilfs2/dir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -243,7 +243,7 @@ nilfs_filetype_table[NILFS_FT_MAX] = {
#define S_SHIFT 12
static unsigned char
-nilfs_type_by_mode[S_IFMT >> S_SHIFT] = {
+nilfs_type_by_mode[(S_IFMT >> S_SHIFT) + 1] = {
[S_IFREG >> S_SHIFT] = NILFS_FT_REG_FILE,
[S_IFDIR >> S_SHIFT] = NILFS_FT_DIR,
[S_IFCHR >> S_SHIFT] = NILFS_FT_CHRDEV,
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 150/158] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (148 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 149/158] nilfs2: fix OOB in nilfs_set_de_type Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 151/158] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards Greg Kroah-Hartman
` (16 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Arınç ÜNAL, Paolo Abeni
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arınç ÜNAL <arinc.unal@arinc9.com>
commit 5f563c31ff0c40ce395d0bae7daa94c7950dac97 upstream.
The MT7530 switch after reset initialises with a core clock frequency that
works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock
frequency must be set to 500MHz.
The mt7530_pll_setup() function is responsible of setting the core clock
frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This
causes MT7530 switch with 25MHz XTAL to egress and ingress frames
improperly.
Introduce a check to run it only on MT7530 with 40MHz XTAL.
The core clock frequency is set by writing to a switch PHY's register.
Access to the PHY's register is done via the MDIO bus the switch is also
on. Therefore, it works only when the switch makes switch PHYs listen on
the MDIO bus the switch is on. This is controlled either by the state of
the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the
modifiable trap register.
When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means
accessing PHY registers via the PHY indirect access control register of the
switch.
When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means
accessing PHY registers via the MDIO bus the switch is on.
For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high,
the core clock frequency won't be set to 500MHz, causing the switch to
egress and ingress frames improperly.
Run mt7530_pll_setup() after PHY direct access is set on the modifiable
trap register.
With these two changes, all MT7530 switches with 25MHz and 40MHz, and
P1_LED_1 pulled high or low, will egress and ingress frames properly.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/4a5dd143f2172ec97a2872fa29c7c4cd520f45b5/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1039
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/mt7530.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2472,8 +2472,6 @@ mt7530_setup(struct dsa_switch *ds)
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
- mt7530_pll_setup(priv);
-
/* Lower Tx driving for TRGMII path */
for (i = 0; i < NUM_TRGMII_CTRL; i++)
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
@@ -2491,6 +2489,9 @@ mt7530_setup(struct dsa_switch *ds)
priv->p6_interface = PHY_INTERFACE_MODE_NA;
+ if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+
mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 151/158] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (149 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 150/158] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530 Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 152/158] virtio_net: Do not send RSS key if it is not supported Greg Kroah-Hartman
` (15 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Florian Fainelli,
Arınç ÜNAL, Daniel Golle, Jakub Kicinski
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arınç ÜNAL <arinc.unal@arinc9.com>
commit 06dfcd4098cfdc4d4577d94793a4f9125386da8b upstream.
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.
There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.
With this change, EEE can now be enabled using ethtool.
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/mt7530.c | 17 ++++++++++++-----
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 13 insertions(+), 5 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2713,18 +2713,25 @@ mt7531_setup(struct dsa_switch *ds)
priv->p5_interface = PHY_INTERFACE_MODE_NA;
priv->p6_interface = PHY_INTERFACE_MODE_NA;
- /* Enable PHY core PLL, since phy_device has not yet been created
- * provided for phy_[read,write]_mmd_indirect is called, we provide
- * our own mt7531_ind_mmd_phy_[read,write] to complete this
- * function.
+ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
+ * phy_device has not yet been created provided for
+ * phy_[read,write]_mmd_indirect is called, we provide our own
+ * mt7531_ind_mmd_phy_[read,write] to complete this function.
*/
val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
- val |= MT7531_PHY_PLL_BYPASS_MODE;
+ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
val &= ~MT7531_PHY_PLL_OFF;
mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
CORE_PLL_GROUP4, val);
+ /* Disable EEE advertisement on the switch PHYs. */
+ for (i = MT753X_CTRL_PHY_ADDR;
+ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+ 0);
+ }
+
mt7531_setup_common(ds);
/* Setup VLAN ID 0 for VLAN-unaware bridges */
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -634,6 +634,7 @@ enum mt7531_clk_skew {
#define RG_SYSPLL_DDSFBK_EN BIT(12)
#define RG_SYSPLL_BIAS_EN BIT(11)
#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
+#define MT7531_RG_SYSPLL_DMY2 BIT(6)
#define MT7531_PHY_PLL_OFF BIT(5)
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 152/158] virtio_net: Do not send RSS key if it is not supported
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (150 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 151/158] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 153/158] powerpc/ftrace: Ignore ftrace locations in exit text sections Greg Kroah-Hartman
` (14 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, qemu-devel, Breno Leitao, Heng Qi,
Xuan Zhuo, David S. Miller, Vlad Poenaru
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Breno Leitao <leitao@debian.org>
commit 059a49aa2e25c58f90b50151f109dd3c4cdb3a47 upstream.
There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.
Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:
# ethtool -X eth0 hfunc toeplitz
This is how the problem happens:
1) ethtool_set_rxfh() calls virtnet_set_rxfh()
2) virtnet_set_rxfh() calls virtnet_commit_rss_command()
3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather
4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;
5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):
if (!sz) {
virtio_error(vdev, "virtio: zero sized buffers are not allowed");
6) virtio_error() (also QEMU function) set the device as broken
vdev->broken = true;
7) Qemu bails out, and do not repond this crazy kernel.
8) The kernel is waiting for the response to come back (function
virtnet_send_command())
9) The kernel is waiting doing the following :
while (!virtqueue_get_buf(vi->cvq, &tmp) &&
!virtqueue_is_broken(vi->cvq))
cpu_relax();
10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.
Fix it by not sending RSS commands if the feature is not available in
the device.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vlad Poenaru <vlad.wing@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/virtio_net.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -3570,19 +3570,34 @@ static int virtnet_get_rxfh(struct net_d
static int virtnet_set_rxfh(struct net_device *dev, const u32 *indir, const u8 *key, const u8 hfunc)
{
struct virtnet_info *vi = netdev_priv(dev);
+ bool update = false;
int i;
if (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP)
return -EOPNOTSUPP;
if (indir) {
+ if (!vi->has_rss)
+ return -EOPNOTSUPP;
+
for (i = 0; i < vi->rss_indir_table_size; ++i)
vi->ctrl->rss.indirection_table[i] = indir[i];
+ update = true;
}
- if (key)
+ if (key) {
+ /* If either _F_HASH_REPORT or _F_RSS are negotiated, the
+ * device provides hash calculation capabilities, that is,
+ * hash_key is configured.
+ */
+ if (!vi->has_rss && !vi->has_rss_hash_report)
+ return -EOPNOTSUPP;
+
memcpy(vi->ctrl->rss.key, key, vi->rss_key_size);
+ update = true;
+ }
- virtnet_commit_rss_command(vi);
+ if (update)
+ virtnet_commit_rss_command(vi);
return 0;
}
@@ -4491,13 +4506,15 @@ static int virtnet_probe(struct virtio_d
if (virtio_has_feature(vdev, VIRTIO_NET_F_HASH_REPORT))
vi->has_rss_hash_report = true;
- if (virtio_has_feature(vdev, VIRTIO_NET_F_RSS))
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_RSS)) {
vi->has_rss = true;
- if (vi->has_rss || vi->has_rss_hash_report) {
vi->rss_indir_table_size =
virtio_cread16(vdev, offsetof(struct virtio_net_config,
rss_max_indirection_table_length));
+ }
+
+ if (vi->has_rss || vi->has_rss_hash_report) {
vi->rss_key_size =
virtio_cread8(vdev, offsetof(struct virtio_net_config, rss_max_key_size));
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 153/158] powerpc/ftrace: Ignore ftrace locations in exit text sections
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (151 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 152/158] virtio_net: Do not send RSS key if it is not supported Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 154/158] ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf Greg Kroah-Hartman
` (13 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Michael Ellerman, Naveen N Rao,
Benjamin Gray
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naveen N Rao <naveen@kernel.org>
commit ea73179e64131bcd29ba6defd33732abdf8ca14b upstream.
Michael reported that we are seeing an ftrace bug on bootup when KASAN
is enabled and we are using -fpatchable-function-entry:
ftrace: allocating 47780 entries in 18 pages
ftrace-powerpc: 0xc0000000020b3d5c: No module provided for non-kernel address
------------[ ftrace bug ]------------
ftrace faulted on modifying
[<c0000000020b3d5c>] 0xc0000000020b3d5c
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c00000000008cef4
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2180 ftrace_bug+0x3c0/0x424
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-00120-g0f71dcfb4aef #860
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000003aa81c LR: c0000000003aa818 CTR: 0000000000000000
REGS: c0000000033cfab0 TRAP: 0700 Not tainted (6.5.0-rc3-00120-g0f71dcfb4aef)
MSR: 8000000002021033 <SF,VEC,ME,IR,DR,RI,LE> CR: 28028240 XER: 00000000
CFAR: c0000000002781a8 IRQMASK: 3
...
NIP [c0000000003aa81c] ftrace_bug+0x3c0/0x424
LR [c0000000003aa818] ftrace_bug+0x3bc/0x424
Call Trace:
ftrace_bug+0x3bc/0x424 (unreliable)
ftrace_process_locs+0x5f4/0x8a0
ftrace_init+0xc0/0x1d0
start_kernel+0x1d8/0x484
With CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y and
CONFIG_KASAN=y, compiler emits nops in functions that it generates for
registering and unregistering global variables (unlike with -pg and
-mprofile-kernel where calls to _mcount() are not generated in those
functions). Those functions then end up in INIT_TEXT and EXIT_TEXT
respectively. We don't expect to see any profiled functions in
EXIT_TEXT, so ftrace_init_nop() assumes that all addresses that aren't
in the core kernel text belongs to a module. Since these functions do
not match that criteria, we see the above bug.
Address this by having ftrace ignore all locations in the text exit
sections of vmlinux.
Fixes: 0f71dcfb4aef ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240213175410.1091313-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/ftrace.h | 10 ++--------
arch/powerpc/include/asm/sections.h | 1 +
arch/powerpc/kernel/trace/ftrace.c | 12 ++++++++++++
arch/powerpc/kernel/trace/ftrace_64_pg.c | 5 +++++
arch/powerpc/kernel/vmlinux.lds.S | 2 ++
5 files changed, 22 insertions(+), 8 deletions(-)
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -20,14 +20,6 @@
#ifndef __ASSEMBLY__
extern void _mcount(void);
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
- if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
- addr += MCOUNT_INSN_SIZE;
-
- return addr;
-}
-
unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip,
unsigned long sp);
@@ -142,8 +134,10 @@ static inline u8 this_cpu_get_ftrace_ena
#ifdef CONFIG_FUNCTION_TRACER
extern unsigned int ftrace_tramp_text[], ftrace_tramp_init[];
void ftrace_free_init_tramp(void);
+unsigned long ftrace_call_adjust(unsigned long addr);
#else
static inline void ftrace_free_init_tramp(void) { }
+static inline unsigned long ftrace_call_adjust(unsigned long addr) { return addr; }
#endif
#endif /* !__ASSEMBLY__ */
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -14,6 +14,7 @@ typedef struct func_desc func_desc_t;
extern char __head_end[];
extern char __srwx_boundary[];
+extern char __exittext_begin[], __exittext_end[];
/* Patch sites */
extern s32 patch__call_flush_branch_caches1;
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -27,10 +27,22 @@
#include <asm/ftrace.h>
#include <asm/syscall.h>
#include <asm/inst.h>
+#include <asm/sections.h>
#define NUM_FTRACE_TRAMPS 2
static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+ if (addr >= (unsigned long)__exittext_begin && addr < (unsigned long)__exittext_end)
+ return 0;
+
+ if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
+ addr += MCOUNT_INSN_SIZE;
+
+ return addr;
+}
+
static ppc_inst_t ftrace_create_branch_inst(unsigned long ip, unsigned long addr, int link)
{
ppc_inst_t op;
--- a/arch/powerpc/kernel/trace/ftrace_64_pg.c
+++ b/arch/powerpc/kernel/trace/ftrace_64_pg.c
@@ -37,6 +37,11 @@
#define NUM_FTRACE_TRAMPS 8
static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+ return addr;
+}
+
static ppc_inst_t
ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
{
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -281,7 +281,9 @@ SECTIONS
* to deal with references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ __exittext_begin = .;
EXIT_TEXT
+ __exittext_end = .;
}
. = ALIGN(PAGE_SIZE);
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 154/158] ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (152 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 153/158] powerpc/ftrace: Ignore ftrace locations in exit text sections Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 155/158] ksmbd: validate request buffer size in smb2_allocate_rsp_buf() Greg Kroah-Hartman
` (12 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Norbert Szetei, Namjae Jeon, Steve French
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Namjae Jeon <linkinjeon@kernel.org>
commit c119f4ede3fa90a9463f50831761c28f989bfb20 upstream.
If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size
validation could be skipped. if request size is smaller than
sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in
smb2_allocate_rsp_buf(). This patch allocate response buffer after
decrypting transform request. smb3_decrypt_req() will validate transform
request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf().
Reported-by: Norbert Szetei <norbert@doyensec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/smb/server/server.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
--- a/fs/smb/server/server.c
+++ b/fs/smb/server/server.c
@@ -167,20 +167,17 @@ static void __handle_ksmbd_work(struct k
int rc;
bool is_chained = false;
- if (conn->ops->allocate_rsp_buf(work))
- return;
-
if (conn->ops->is_transform_hdr &&
conn->ops->is_transform_hdr(work->request_buf)) {
rc = conn->ops->decrypt_req(work);
- if (rc < 0) {
- conn->ops->set_rsp_status(work, STATUS_DATA_ERROR);
- goto send;
- }
-
+ if (rc < 0)
+ return;
work->encrypted = true;
}
+ if (conn->ops->allocate_rsp_buf(work))
+ return;
+
rc = conn->ops->init_rsp_hdr(work);
if (rc) {
/* either uid or tid is not correct */
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 155/158] ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (153 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 154/158] ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 156/158] ksmbd: clear RENAME_NOREPLACE before calling vfs_rename Greg Kroah-Hartman
` (11 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Namjae Jeon, Steve French
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Namjae Jeon <linkinjeon@kernel.org>
commit 17cf0c2794bdb6f39671265aa18aea5c22ee8c4a upstream.
The response buffer should be allocated in smb2_allocate_rsp_buf
before validating request. But the fields in payload as well as smb2 header
is used in smb2_allocate_rsp_buf(). This patch add simple buffer size
validation to avoid potencial out-of-bounds in request buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/smb/server/smb2pdu.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -535,6 +535,10 @@ int smb2_allocate_rsp_buf(struct ksmbd_w
if (cmd == SMB2_QUERY_INFO_HE) {
struct smb2_query_info_req *req;
+ if (get_rfc1002_len(work->request_buf) <
+ offsetof(struct smb2_query_info_req, OutputBufferLength))
+ return -EINVAL;
+
req = smb2_get_msg(work->request_buf);
if ((req->InfoType == SMB2_O_INFO_FILE &&
(req->FileInfoClass == FILE_FULL_EA_INFORMATION ||
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 156/158] ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (154 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 155/158] ksmbd: validate request buffer size in smb2_allocate_rsp_buf() Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 157/158] ksmbd: common: use struct_group_attr instead of struct_group for network_open_info Greg Kroah-Hartman
` (10 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable
Cc: Greg Kroah-Hartman, patches, Marios Makassikis, Namjae Jeon,
Steve French
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marios Makassikis <mmakassikis@freebox.fr>
commit 4973b04d3ea577db80c501c5f14e68ec69fe1794 upstream.
File overwrite case is explicitly handled, so it is not necessary to
pass RENAME_NOREPLACE to vfs_rename.
Clearing the flag fixes rename operations when the share is a ntfs-3g
mount. The latter uses an older version of fuse with no support for
flags in the ->rename op.
Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/smb/server/vfs.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/fs/smb/server/vfs.c
+++ b/fs/smb/server/vfs.c
@@ -745,10 +745,15 @@ retry:
goto out4;
}
+ /*
+ * explicitly handle file overwrite case, for compatibility with
+ * filesystems that may not support rename flags (e.g: fuse)
+ */
if ((flags & RENAME_NOREPLACE) && d_is_positive(new_dentry)) {
err = -EEXIST;
goto out4;
}
+ flags &= ~(RENAME_NOREPLACE);
if (old_child == trap) {
err = -EINVAL;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 157/158] ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (155 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 156/158] ksmbd: clear RENAME_NOREPLACE before calling vfs_rename Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 158/158] PCI/ASPM: Fix deadlock when enabling ASPM Greg Kroah-Hartman
` (9 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Namjae Jeon, Steve French
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Namjae Jeon <linkinjeon@kernel.org>
commit 0268a7cc7fdc47d90b6c18859de7718d5059f6f1 upstream.
4byte padding cause the connection issue with the applications of MacOS.
smb2_close response size increases by 4 bytes by padding, And the smb
client of MacOS check it and stop the connection. This patch use
struct_group_attr instead of struct_group for network_open_info to use
__packed to avoid padding.
Fixes: 0015eb6e1238 ("smb: client, common: fix fortify warnings")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/smb/common/smb2pdu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/smb/common/smb2pdu.h
+++ b/fs/smb/common/smb2pdu.h
@@ -700,7 +700,7 @@ struct smb2_close_rsp {
__le16 StructureSize; /* 60 */
__le16 Flags;
__le32 Reserved;
- struct_group(network_open_info,
+ struct_group_attr(network_open_info, __packed,
__le64 CreationTime;
__le64 LastAccessTime;
__le64 LastWriteTime;
^ permalink raw reply [flat|nested] 171+ messages in thread
* [PATCH 6.6 158/158] PCI/ASPM: Fix deadlock when enabling ASPM
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (156 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 157/158] ksmbd: common: use struct_group_attr instead of struct_group for network_open_info Greg Kroah-Hartman
@ 2024-04-23 21:39 ` Greg Kroah-Hartman
2024-04-23 23:25 ` [PATCH 6.6 000/158] 6.6.29-rc1 review SeongJae Park
` (8 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-23 21:39 UTC (permalink / raw)
To: stable; +Cc: Greg Kroah-Hartman, patches, Johan Hovold, Bjorn Helgaas
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan+linaro@kernel.org>
commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
[bhelgaas: backported to v6.6.y, which contains 8cc22ba3f77c ("Revert
"PCI/ASPM: Remove pcie_aspm_pm_state_change()""), a backport of
f93e71aea6c6. This omits the drivers/pci/controller/dwc/pcie-qcom.c hunk
that updates qcom_pcie_enable_aspm(), which was added by 9f4f3dfad8cf
("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops"), which is not
present in v6.6.28.]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/bus.c | 49 +++++++++++++++++++-----------
drivers/pci/pci.c | 78 ++++++++++++++++++++++++++++++++----------------
drivers/pci/pci.h | 4 +-
drivers/pci/pcie/aspm.c | 13 +++++---
include/linux/pci.h | 5 +++
5 files changed, 100 insertions(+), 49 deletions(-)
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -386,21 +386,8 @@ void pci_bus_add_devices(const struct pc
}
EXPORT_SYMBOL(pci_bus_add_devices);
-/** pci_walk_bus - walk devices on/under bus, calling callback.
- * @top bus whose devices should be walked
- * @cb callback to be called for each device found
- * @userdata arbitrary pointer to be passed to callback.
- *
- * Walk the given bus, including any bridged devices
- * on buses under this bus. Call the provided callback
- * on each device found.
- *
- * We check the return of @cb each time. If it returns anything
- * other than 0, we break out.
- *
- */
-void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
- void *userdata)
+static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ void *userdata, bool locked)
{
struct pci_dev *dev;
struct pci_bus *bus;
@@ -408,7 +395,8 @@ void pci_walk_bus(struct pci_bus *top, i
int retval;
bus = top;
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
next = top->devices.next;
for (;;) {
if (next == &bus->devices) {
@@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, i
if (retval)
break;
}
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
+}
+
+/**
+ * pci_walk_bus - walk devices on/under bus, calling callback.
+ * @top: bus whose devices should be walked
+ * @cb: callback to be called for each device found
+ * @userdata: arbitrary pointer to be passed to callback
+ *
+ * Walk the given bus, including any bridged devices
+ * on buses under this bus. Call the provided callback
+ * on each device found.
+ *
+ * We check the return of @cb each time. If it returns anything
+ * other than 0, we break out.
+ */
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+ __pci_walk_bus(top, cb, userdata, false);
}
EXPORT_SYMBOL_GPL(pci_walk_bus);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+ lockdep_assert_held(&pci_bus_sem);
+
+ __pci_walk_bus(top, cb, userdata, true);
+}
+EXPORT_SYMBOL_GPL(pci_walk_bus_locked);
+
struct pci_bus *pci_bus_get(struct pci_bus *bus)
{
if (bus)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1291,6 +1291,7 @@ end:
/**
* pci_set_full_power_state - Put a PCI device into D0 and update its state
* @dev: PCI device to power up
+ * @locked: whether pci_bus_sem is held
*
* Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
* to confirm the state change, restore its BARs if they might be lost and
@@ -1300,7 +1301,7 @@ end:
* to D0, it is more efficient to use pci_power_up() directly instead of this
* function.
*/
-static int pci_set_full_power_state(struct pci_dev *dev)
+static int pci_set_full_power_state(struct pci_dev *dev, bool locked)
{
u16 pmcsr;
int ret;
@@ -1336,7 +1337,7 @@ static int pci_set_full_power_state(stru
}
if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
+ pcie_aspm_pm_state_change(dev->bus->self, locked);
return 0;
}
@@ -1365,10 +1366,22 @@ void pci_bus_set_current_state(struct pc
pci_walk_bus(bus, __pci_dev_set_current_state, &state);
}
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked)
+{
+ if (!bus)
+ return;
+
+ if (locked)
+ pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state);
+ else
+ pci_walk_bus(bus, __pci_dev_set_current_state, &state);
+}
+
/**
* pci_set_low_power_state - Put a PCI device into a low-power state.
* @dev: PCI device to handle.
* @state: PCI power state (D1, D2, D3hot) to put the device into.
+ * @locked: whether pci_bus_sem is held
*
* Use the device's PCI_PM_CTRL register to put it into a low-power state.
*
@@ -1379,7 +1392,7 @@ void pci_bus_set_current_state(struct pc
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
-static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
+static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
{
u16 pmcsr;
@@ -1433,29 +1446,12 @@ static int pci_set_low_power_state(struc
pci_power_name(state));
if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
+ pcie_aspm_pm_state_change(dev->bus->self, locked);
return 0;
}
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to handle.
- * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- *
- * Transition a device to a new power state, using the platform firmware and/or
- * the device's PCI PM registers.
- *
- * RETURN VALUE:
- * -EINVAL if the requested state is invalid.
- * -EIO if device does not support PCI PM or its PM capabilities register has a
- * wrong version, or device doesn't support the requested state.
- * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
- * 0 if device already is in the requested state.
- * 0 if the transition is to D3 but D3 is not supported.
- * 0 if device's power state has been successfully changed.
- */
-int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
{
int error;
@@ -1479,7 +1475,7 @@ int pci_set_power_state(struct pci_dev *
return 0;
if (state == PCI_D0)
- return pci_set_full_power_state(dev);
+ return pci_set_full_power_state(dev, locked);
/*
* This device is quirked not to be put into D3, so don't put it in
@@ -1493,16 +1489,16 @@ int pci_set_power_state(struct pci_dev *
* To put the device in D3cold, put it into D3hot in the native
* way, then put it into D3cold using platform ops.
*/
- error = pci_set_low_power_state(dev, PCI_D3hot);
+ error = pci_set_low_power_state(dev, PCI_D3hot, locked);
if (pci_platform_power_transition(dev, PCI_D3cold))
return error;
/* Powering off a bridge may power off the whole hierarchy */
if (dev->current_state == PCI_D3cold)
- pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+ __pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked);
} else {
- error = pci_set_low_power_state(dev, state);
+ error = pci_set_low_power_state(dev, state, locked);
if (pci_platform_power_transition(dev, state))
return error;
@@ -1510,8 +1506,38 @@ int pci_set_power_state(struct pci_dev *
return 0;
}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform firmware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
+ * 0 if device already is in the requested state.
+ * 0 if the transition is to D3 but D3 is not supported.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ return __pci_set_power_state(dev, state, false);
+}
EXPORT_SYMBOL(pci_set_power_state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{
+ lockdep_assert_held(&pci_bus_sem);
+
+ return __pci_set_power_state(dev, state, true);
+}
+EXPORT_SYMBOL(pci_set_power_state_locked);
+
#define PCI_EXP_SAVE_REGS 7
static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev,
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -561,12 +561,12 @@ int pcie_retrain_link(struct pci_dev *pd
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
+static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
#endif
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1001,8 +1001,11 @@ void pcie_aspm_exit_link_state(struct pc
up_read(&pci_bus_sem);
}
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+/*
+ * @pdev: the root port or switch downstream port
+ * @locked: whether pci_bus_sem is held
+ */
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked)
{
struct pcie_link_state *link = pdev->link_state;
@@ -1012,12 +1015,14 @@ void pcie_aspm_pm_state_change(struct pc
* Devices changed PM state, we should recheck if latency
* meets all functions' requirement
*/
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
pcie_update_aspm_capable(link->root);
pcie_config_aspm_path(link);
mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
}
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1391,6 +1391,7 @@ int pci_load_and_free_saved_state(struct
struct pci_saved_state **state);
int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
void pci_pme_active(struct pci_dev *dev, bool enable);
@@ -1594,6 +1595,8 @@ int pci_scan_bridge(struct pci_bus *bus,
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
void *userdata);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
void pci_setup_bridge(struct pci_bus *bus);
@@ -1990,6 +1993,8 @@ static inline int pci_save_state(struct
static inline void pci_restore_state(struct pci_dev *dev) { }
static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{ return 0; }
+static inline int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{ return 0; }
static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
{ return 0; }
static inline pci_power_t pci_choose_state(struct pci_dev *dev,
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (157 preceding siblings ...)
2024-04-23 21:39 ` [PATCH 6.6 158/158] PCI/ASPM: Fix deadlock when enabling ASPM Greg Kroah-Hartman
@ 2024-04-23 23:25 ` SeongJae Park
2024-04-24 8:25 ` Ron Economos
` (7 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: SeongJae Park @ 2024-04-23 23:25 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: SeongJae Park, stable, patches, linux-kernel, torvalds, akpm,
linux, shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, broonie,
damon
Hello,
On Tue, 23 Apr 2024 14:37:17 -0700 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine.
Attaching the test results summary below. Please note that I retrieved the
kernel from linux-stable-rc tree[2].
Tested-by: SeongJae Park <sj@kernel.org>
[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] 73d4a5d15a31 ("Linux 6.6.29-rc1")
Thanks,
SJ
[...]
---
ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: debugfs_rm_non_contexts.sh
ok 8 selftests: damon: sysfs.sh
ok 9 selftests: damon: sysfs_update_removed_scheme_dir.sh
ok 10 selftests: damon: reclaim.sh
ok 11 selftests: damon: lru_sort.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh
ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_m68k.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk
2024-04-23 21:38 ` [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk Greg Kroah-Hartman
@ 2024-04-24 6:27 ` Arnd Bergmann
2024-04-27 14:05 ` Greg Kroah-Hartman
0 siblings, 1 reply; 171+ messages in thread
From: Arnd Bergmann @ 2024-04-24 6:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable; +Cc: patches, Niklas Schnelle, Sasha Levin
On Tue, Apr 23, 2024, at 23:38, Greg Kroah-Hartman wrote:
> 6.6-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Niklas Schnelle <schnelle@linux.ibm.com>
>
> [ Upstream commit 52e24f8c0a102ac76649c6b71224fadcc82bd5da ]
>
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. In the pci-quirks case the I/O port acceses are
> used in the quirks for several AMD south bridges, Add a config option
> for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code.
>
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/usb/Kconfig | 10 ++++++++++
> drivers/usb/core/hcd-pci.c | 3 +--
> drivers/usb/host/pci-quirks.c | 2 ++
> drivers/usb/host/pci-quirks.h | 30 ++++++++++++++++++++++--------
> include/linux/usb/hcd.h | 17 +++++++++++++++++
> 5 files changed, 52 insertions(+), 10 deletions(-)
There is no harm in backporting this one to 6.6, but there
is no need either since it is only a preparation for the coming
changes to asm/io.h.
Like the PCI quirks patch, I wouldn't backport it at all.
If you do want to keep it, be careful about backporting it
to older kernels, as it depends on fcbfe8121a45 ("Kconfig:
introduce HAS_IOPORT option and select it as necessary") from
linux-6.4.
Arnd
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (158 preceding siblings ...)
2024-04-23 23:25 ` [PATCH 6.6 000/158] 6.6.29-rc1 review SeongJae Park
@ 2024-04-24 8:25 ` Ron Economos
2024-04-24 9:29 ` Harshit Mogalapalli
` (6 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Ron Economos @ 2024-04-24 8:25 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, conor, allen.lkml, broonie
On 4/23/24 2:37 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos <re@w6rz.net>
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (159 preceding siblings ...)
2024-04-24 8:25 ` Ron Economos
@ 2024-04-24 9:29 ` Harshit Mogalapalli
2024-04-24 11:12 ` Takeshi Ogasawara
` (5 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Harshit Mogalapalli @ 2024-04-24 9:29 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee, srw,
rwarsow, conor, allen.lkml, broonie, Darren Kenny, Vegard Nossum
Hi Greg,
On 24/04/24 03:07, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
No problems seen on x86_64 and aarch64 with our testing.
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Thanks,
Harshit
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (160 preceding siblings ...)
2024-04-24 9:29 ` Harshit Mogalapalli
@ 2024-04-24 11:12 ` Takeshi Ogasawara
2024-04-24 13:48 ` Mark Brown
` (4 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Takeshi Ogasawara @ 2024-04-24 11:12 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, broonie
Hi Greg
On Wed, Apr 24, 2024 at 6:44 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
6.6.29-rc1 tested.
Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.
Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)
[ 0.000000] Linux version 6.6.29-rc1rv
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU
Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Wed Apr 24 18:35:14 JST 2024
Thanks
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (161 preceding siblings ...)
2024-04-24 11:12 ` Takeshi Ogasawara
@ 2024-04-24 13:48 ` Mark Brown
2024-04-24 21:54 ` Greg Kroah-Hartman
2024-04-24 16:58 ` Florian Fainelli
` (3 subsequent siblings)
166 siblings, 1 reply; 171+ messages in thread
From: Mark Brown @ 2024-04-24 13:48 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
[-- Attachment #1: Type: text/plain, Size: 623 bytes --]
On Tue, Apr 23, 2024 at 02:37:17PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
This and all the other -rcs break the build of the arm64 selftests due
to this:
> Oleg Nesterov <oleg@redhat.com>
> selftests/timers/posix_timers: Reimplement check_timer_distribution()
which was identified as breaking in -next and fixed with 16767502aa990c
("selftests: kselftest: Fix build failure with NOLIBC").
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (162 preceding siblings ...)
2024-04-24 13:48 ` Mark Brown
@ 2024-04-24 16:58 ` Florian Fainelli
2024-04-25 8:59 ` Jon Hunter
` (2 subsequent siblings)
166 siblings, 0 replies; 171+ messages in thread
From: Florian Fainelli @ 2024-04-24 16:58 UTC (permalink / raw)
To: Greg Kroah-Hartman, stable
Cc: patches, linux-kernel, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, sudipm.mukherjee, srw, rwarsow,
conor, allen.lkml, broonie
On 4/23/24 14:37, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
--
Florian
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-24 13:48 ` Mark Brown
@ 2024-04-24 21:54 ` Greg Kroah-Hartman
0 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-24 21:54 UTC (permalink / raw)
To: Mark Brown
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml
On Wed, Apr 24, 2024 at 10:48:50PM +0900, Mark Brown wrote:
> On Tue, Apr 23, 2024 at 02:37:17PM -0700, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 6.6.29 release.
> > There are 158 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
>
> This and all the other -rcs break the build of the arm64 selftests due
> to this:
>
> > Oleg Nesterov <oleg@redhat.com>
> > selftests/timers/posix_timers: Reimplement check_timer_distribution()
>
> which was identified as breaking in -next and fixed with 16767502aa990c
> ("selftests: kselftest: Fix build failure with NOLIBC").
THanks, now queued up.
greg k-h
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (163 preceding siblings ...)
2024-04-24 16:58 ` Florian Fainelli
@ 2024-04-25 8:59 ` Jon Hunter
2024-04-25 9:03 ` Naresh Kamboju
2024-04-25 20:15 ` Shreeya Patel
166 siblings, 0 replies; 171+ messages in thread
From: Jon Hunter @ 2024-04-25 8:59 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Greg Kroah-Hartman, patches, linux-kernel, torvalds, akpm, linux,
shuah, patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, broonie,
linux-tegra, stable
On Tue, 23 Apr 2024 14:37:17 -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v6.6:
10 builds: 10 pass, 0 fail
26 boots: 26 pass, 0 fail
116 tests: 116 pass, 0 fail
Linux version: 6.6.29-rc1-g73d4a5d15a31
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Jon
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (164 preceding siblings ...)
2024-04-25 8:59 ` Jon Hunter
@ 2024-04-25 9:03 ` Naresh Kamboju
2024-04-25 20:15 ` Shreeya Patel
166 siblings, 0 replies; 171+ messages in thread
From: Naresh Kamboju @ 2024-04-25 9:03 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, broonie
On Wed, 24 Apr 2024 at 03:12, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 6.6.29-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.6.y
* git commit: 73d4a5d15a314d4e0dee024e089d765001c1ce71
* git describe: v6.6.28-159-g73d4a5d15a31
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.28-159-g73d4a5d15a31
## Test Regressions (compared to v6.6.27)
## Metric Regressions (compared to v6.6.27)
## Test Fixes (compared to v6.6.27)
## Metric Fixes (compared to v6.6.27)
## Test result summary
total: 161084, pass: 140552, fail: 2102, skip: 18269, xfail: 161
## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 126 total, 126 passed, 0 failed
* arm64: 38 total, 38 passed, 0 failed
* i386: 29 total, 29 passed, 0 failed
* mips: 24 total, 24 passed, 0 failed
* parisc: 3 total, 3 passed, 0 failed
* powerpc: 34 total, 34 passed, 0 failed
* riscv: 17 total, 17 passed, 0 failed
* s390: 11 total, 11 passed, 0 failed
* sh: 9 total, 9 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 33 total, 33 passed, 0 failed
## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mm
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-smoketest
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 000/158] 6.6.29-rc1 review
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
` (165 preceding siblings ...)
2024-04-25 9:03 ` Naresh Kamboju
@ 2024-04-25 20:15 ` Shreeya Patel
166 siblings, 0 replies; 171+ messages in thread
From: Shreeya Patel @ 2024-04-25 20:15 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, allen.lkml, broonie,
Gustavo Padovan, kernelci-regressions mailing list
On Wednesday, April 24, 2024 03:07 IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 6.6.29 release.
> There are 158 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.29-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
KernelCI report for stable-rc/linux-6.6.y for this week :-
## stable-rc HEAD for linux-6.6.y:
Date: 2024-04-24
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/log/?h=73d4a5d15a314d4e0dee024e089d765001c1ce71
## Build failures:
No build failures seen for the stable-rc/linux-6.6.y commit head \o/
## Boot failures:
No **new** boot failures seen for the stable-rc/linux-6.6.y commit head \o/
Tested-by: kernelci.org bot <bot@kernelci.org>
Thanks,
Shreeya Patel
^ permalink raw reply [flat|nested] 171+ messages in thread
* Re: [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk
2024-04-24 6:27 ` Arnd Bergmann
@ 2024-04-27 14:05 ` Greg Kroah-Hartman
0 siblings, 0 replies; 171+ messages in thread
From: Greg Kroah-Hartman @ 2024-04-27 14:05 UTC (permalink / raw)
To: Arnd Bergmann; +Cc: stable, patches, Niklas Schnelle, Sasha Levin
On Wed, Apr 24, 2024 at 08:27:39AM +0200, Arnd Bergmann wrote:
> On Tue, Apr 23, 2024, at 23:38, Greg Kroah-Hartman wrote:
> > 6.6-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Niklas Schnelle <schnelle@linux.ibm.com>
> >
> > [ Upstream commit 52e24f8c0a102ac76649c6b71224fadcc82bd5da ]
> >
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. In the pci-quirks case the I/O port acceses are
> > used in the quirks for several AMD south bridges, Add a config option
> > for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code.
> >
> > Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> > Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> > Link: https://lore.kernel.org/r/20230911125653.1393895-3-schnelle@linux.ibm.com
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> > drivers/usb/Kconfig | 10 ++++++++++
> > drivers/usb/core/hcd-pci.c | 3 +--
> > drivers/usb/host/pci-quirks.c | 2 ++
> > drivers/usb/host/pci-quirks.h | 30 ++++++++++++++++++++++--------
> > include/linux/usb/hcd.h | 17 +++++++++++++++++
> > 5 files changed, 52 insertions(+), 10 deletions(-)
>
> There is no harm in backporting this one to 6.6, but there
> is no need either since it is only a preparation for the coming
> changes to asm/io.h.
>
> Like the PCI quirks patch, I wouldn't backport it at all.
> If you do want to keep it, be careful about backporting it
> to older kernels, as it depends on fcbfe8121a45 ("Kconfig:
> introduce HAS_IOPORT option and select it as necessary") from
> linux-6.4.
Agreed, I've dropped all of these now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 171+ messages in thread
end of thread, other threads:[~2024-04-27 14:05 UTC | newest]
Thread overview: 171+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-23 21:37 [PATCH 6.6 000/158] 6.6.29-rc1 review Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 001/158] smb: client: remove extra @chan_count check in __cifs_put_smb_ses() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 002/158] smb: client: fix UAF in smb2_reconnect_server() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 003/158] smb3: show beginning time for per share stats Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 004/158] smb: client: guarantee refcounted children from parent session Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 005/158] smb: client: refresh referral without acquiring refpath_lock Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 006/158] drm/i915: Fix FEC pipe A vs. DDI A mixup Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 007/158] drm/i915/mst: Reject FEC+MST on ICL Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 008/158] drm/i915/cdclk: Fix voltage_level programming edge case Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 009/158] drm/i915: Change intel_pipe_update_{start,end}() calling convention Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 010/158] drm/i915: Extract intel_crtc_vblank_evade_scanlines() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 011/158] drm/i915: Enable VRR later during fastsets Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 012/158] drm/i915: Adjust seamless_m_n flag behaviour Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 013/158] drm/i915: Disable live M/N updates when using bigjoiner Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 014/158] selftests: timers: Convert posix_timers test to generate KTAP output Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 015/158] selftests/timers/posix_timers: Reimplement check_timer_distribution() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 016/158] drm/amd/display: Do not recursively call manual trigger programming Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 017/158] ceph: pass the mdsc to several helpers Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 018/158] ceph: rename _to_client() to _to_fs_client() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 019/158] ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 020/158] selftests: timers: Fix posix_timers ksft_print_msg() warning Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 021/158] drm/msm/dpu: populate SSPP scaler block version Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 022/158] media: videobuf2: request more buffers for vb2_read Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 023/158] io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 024/158] drm/i915/vma: Fix UAF on destroy against retire race Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 025/158] SUNRPC: Fix rpcgss_context trace event acceptor field Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 026/158] selftests/ftrace: Limit length in subsystem-enable tests Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 027/158] random: handle creditable entropy from atomic process context Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 028/158] scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 029/158] net: usb: ax88179_178a: avoid writing the mac address before first reading Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 030/158] arm64/mm: Modify range-based tlbi to decrement scale Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 031/158] arm64: tlb: Fix TLBI RANGE operand Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 032/158] scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 033/158] netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 034/158] netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 035/158] netfilter: br_netfilter: skip conntrack input hook for promisc packets Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 036/158] netfilter: nft_set_pipapo: do not free live element Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 037/158] netfilter: flowtable: validate pppoe header Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 038/158] netfilter: flowtable: incorrect pppoe tuple Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 039/158] af_unix: Call manage_oob() for every skb in unix_stream_read_generic() Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 040/158] af_unix: Dont peek OOB data without MSG_OOB Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 041/158] net: sparx5: flower: fix fragment flags handling Greg Kroah-Hartman
2024-04-23 21:37 ` [PATCH 6.6 042/158] net/mlx5: Lag, restore buckets number to default after hash LAG deactivation Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 043/158] net/mlx5e: Prevent deadlock while disabling aRFS Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 044/158] net: change maximum number of UDP segments to 128 Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 045/158] octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementation Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 046/158] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 047/158] net: stmmac: Fix max-speed being ignored on queue re-init Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 048/158] net: stmmac: Fix IP-cores specific MAC capabilities Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 049/158] ice: tc: check src_vsi in case of traffic from VF Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 050/158] ice: tc: allow zero flags in parsing tc flower Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 051/158] ice: Fix checking for unsupported keys on non-tunnel device Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 052/158] tun: limit printing rate when illegal packet received by tun dev Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 053/158] net: dsa: mt7530: fix mirroring frames received on local port Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 054/158] net: dsa: mt7530: fix port mirroring for MT7988 SoC switch Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 055/158] s390/ism: Properly fix receive message buffer allocation Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 056/158] gpiolib: swnode: Remove wrong header inclusion Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 057/158] net: ethernet: mtk_eth_soc: fix WED + wifi reset Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 058/158] net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 059/158] drm/i915/mst: Limit MST+DSC to TGL+ Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 060/158] RDMA/rxe: Fix the problem "mutex_destroy missing" Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 061/158] RDMA/cm: Print the old state when cm_destroy_id gets timeout Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 062/158] RDMA/mlx5: Fix port number for counter query in multi-port configuration Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 063/158] perf lock contention: Add a missing NULL check Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 064/158] s390/qdio: handle deferred cc1 Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 065/158] s390/cio: fix race condition during online processing Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 066/158] drm: nv04: Fix out of bounds access Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 067/158] drm/panel: visionox-rm69299: dont unregister DSI device Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 068/158] drm/radeon: make -fstrict-flex-arrays=3 happy Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 069/158] ALSA: scarlett2: Move USB IDs out from device_info struct Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 070/158] ALSA: scarlett2: Add support for Clarett 8Pre USB Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 071/158] ASoC: ti: Convert Pandora ASoC to GPIO descriptors Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 072/158] usb: pci-quirks: group AMD specific quirk code together Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 073/158] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk Greg Kroah-Hartman
2024-04-24 6:27 ` Arnd Bergmann
2024-04-27 14:05 ` Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 074/158] usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 075/158] thunderbolt: Introduce tb_port_reset() Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 076/158] thunderbolt: Introduce tb_path_deactivate_hop() Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 077/158] thunderbolt: Make tb_switch_reset() support Thunderbolt 2, 3 and USB4 routers Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 078/158] thunderbolt: Reset topology created by the boot firmware Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 079/158] ALSA: scarlett2: Default mixer driver to enabled Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 080/158] ALSA: scarlett2: Add correct product series name to messages Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 081/158] ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 082/158] ALSA: scarlett2: Add Focusrite Clarett 2Pre and 4Pre USB support Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 083/158] PCI/DPC: Use FIELD_GET() Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 084/158] PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 085/158] ALSA: scarlett2: Rename scarlett_gen2 to scarlett2 Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 086/158] drm: panel-orientation-quirks: Add quirk for Lenovo Legion Go Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 087/158] usb: xhci: Add timeout argument in address_device USB HCD callback Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 088/158] usb: new quirk to reduce the SET_ADDRESS request timeout Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 089/158] platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 090/158] interconnect: Dont access req_list while its being manipulated Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 091/158] clk: Remove prepare_lock hold assertion in __clk_release() Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 092/158] clk: Initialize struct clk_core kref earlier Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 093/158] clk: Get runtime PM before walking tree during disable_unused Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 094/158] clk: Show active consumers of clocks in debugfs Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 095/158] clk: Get runtime PM before walking tree for clk_summary Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 096/158] clk: mediatek: Do a runtime PM get on controllers during probe Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 097/158] x86/bugs: Fix BHI retpoline check Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 098/158] x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 099/158] net/mlx5: E-switch, store eswitch pointer before registering devlink_param Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 100/158] ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 101/158] ALSA: hda/tas2781: correct the register for pow calibrated data Greg Kroah-Hartman
2024-04-23 21:38 ` [PATCH 6.6 102/158] ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1 Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 103/158] ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 104/158] ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 105/158] binder: check offset alignment in binder_get_object() Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 106/158] thunderbolt: Avoid notify PM core about runtime PM resume Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 107/158] thunderbolt: Fix wake configurations after device unplug Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 108/158] comedi: vmk80xx: fix incomplete endpoint checking Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 109/158] serial: mxs-auart: add spinlock around changing cts state Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 110/158] serial/pmac_zilog: Remove flawed mitigation for rx irq flood Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 111/158] serial: stm32: Return IRQ_NONE in the ISR if no handling happend Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 112/158] serial: stm32: Reset .throttled state in .startup() Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 113/158] serial: core: Clearing the circular buffer before NULLifying it Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 114/158] serial: core: Fix missing shutdown and startup for serial base port Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 115/158] USB: serial: option: add Fibocom FM135-GL variants Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 116/158] USB: serial: option: add support for Fibocom FM650/FG650 Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 117/158] USB: serial: option: add Lonsung U8300/U9300 product Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 118/158] USB: serial: option: support Quectel EM060K sub-models Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 119/158] USB: serial: option: add Rolling RW101-GL and RW135-GL support Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 120/158] USB: serial: option: add Telit FN920C04 rmnet compositions Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 121/158] Revert "usb: cdc-wdm: close race between read and workqueue" Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 122/158] usb: dwc2: host: Fix dereference issue in DDMA completion flow Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 123/158] usb: Disable USB3 LPM at shutdown Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 124/158] usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 125/158] mei: me: disable RPL-S on SPS and IGN firmwares Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 126/158] speakup: Avoid crash on very long word Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 127/158] fs: sysfs: Fix reference leak in sysfs_break_active_protection() Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 128/158] sched: Add missing memory barrier in switch_mm_cid Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 129/158] KVM: x86: Snapshot if a vCPUs vendor model is AMD vs. Intel compatible Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 130/158] KVM: x86/pmu: Disable support for adaptive PEBS Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 131/158] KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 132/158] KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 133/158] arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 134/158] arm64: hibernate: Fix level3 translation fault in swsusp_save() Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 135/158] init/main.c: Fix potential static_command_line memory overflow Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 136/158] mm/userfaultfd: allow hugetlb change protection upon poison entry Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 137/158] mm,swapops: update check in is_pfn_swap_entry for hwpoison entries Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 138/158] mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 139/158] mm/shmem: inline shmem_is_huge() for disabled transparent hugepages Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 140/158] fuse: fix leaked ENOSYS error on first statx call Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 141/158] drm/amdgpu: validate the parameters of bo mapping operations more clearly Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 142/158] drm/amdkfd: Fix memory leak in create_process failure Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 143/158] drm/amdgpu: remove invalid resource->start check v2 Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 144/158] drm/vmwgfx: Fix prime import/export Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 145/158] drm/vmwgfx: Sort primary plane formats by order of preference Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 146/158] drm/vmwgfx: Fix crtcs atomic check conditional Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 147/158] nouveau: fix instmem race condition around ptr stores Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 148/158] bootconfig: use memblock_free_late to free xbc memory to buddy Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 149/158] nilfs2: fix OOB in nilfs_set_de_type Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 150/158] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530 Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 151/158] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 152/158] virtio_net: Do not send RSS key if it is not supported Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 153/158] powerpc/ftrace: Ignore ftrace locations in exit text sections Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 154/158] ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 155/158] ksmbd: validate request buffer size in smb2_allocate_rsp_buf() Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 156/158] ksmbd: clear RENAME_NOREPLACE before calling vfs_rename Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 157/158] ksmbd: common: use struct_group_attr instead of struct_group for network_open_info Greg Kroah-Hartman
2024-04-23 21:39 ` [PATCH 6.6 158/158] PCI/ASPM: Fix deadlock when enabling ASPM Greg Kroah-Hartman
2024-04-23 23:25 ` [PATCH 6.6 000/158] 6.6.29-rc1 review SeongJae Park
2024-04-24 8:25 ` Ron Economos
2024-04-24 9:29 ` Harshit Mogalapalli
2024-04-24 11:12 ` Takeshi Ogasawara
2024-04-24 13:48 ` Mark Brown
2024-04-24 21:54 ` Greg Kroah-Hartman
2024-04-24 16:58 ` Florian Fainelli
2024-04-25 8:59 ` Jon Hunter
2024-04-25 9:03 ` Naresh Kamboju
2024-04-25 20:15 ` Shreeya Patel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).