* [PATCH v1] libxl: add helper function to set device_model_version
@ 2019-05-14 7:27 Olaf Hering
2019-05-14 7:27 ` [Xen-devel] " Olaf Hering
2019-05-14 10:18 ` Roger Pau Monné
0 siblings, 2 replies; 12+ messages in thread
From: Olaf Hering @ 2019-05-14 7:27 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Olaf Hering, Ian Jackson
An upcoming change will set the value of device_model_version properly
also for the non-HVM case.
Move existing code to new function libxl__domain_set_device_model.
Move also initialization for device_model_stubdomain to that function.
Make sure libxl__domain_build_info_setdefault is called with
device_model_version set.
Update libxl__spawn_stub_dm() and initiate_domain_create() to call the
new function prior libxl__domain_build_info_setdefault() because
device_mode_version is expected to be initialzed.
libxl_domain_need_memory() needs no update because it does not have a
d_config available anyway, and the callers provide a populated b_info.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
---
tools/libxl/libxl_create.c | 90 +++++++++++++++++++++++++++-----------------
tools/libxl/libxl_dm.c | 2 +
tools/libxl/libxl_internal.h | 2 +
3 files changed, 59 insertions(+), 35 deletions(-)
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 89fe80fc9c..3f0431cc84 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -27,6 +27,53 @@
#include <xen-xsm/flask/flask.h>
+int libxl__domain_set_device_model(libxl__gc *gc, libxl_domain_config *d_config)
+{
+ libxl_domain_build_info *b_info = &d_config->b_info;
+ int ret;
+
+ libxl_defbool_setdefault(&b_info->device_model_stubdomain, false);
+
+ if (b_info->device_model_version)
+ return 0;
+
+ switch (b_info->type) {
+ case LIBXL_DOMAIN_TYPE_HVM:
+ if (libxl_defbool_val(b_info->device_model_stubdomain)) {
+ b_info->device_model_version =
+ LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
+ } else {
+ b_info->device_model_version = libxl__default_device_model(gc);
+ }
+ break;
+ default:
+ b_info->device_model_version =
+ LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
+ break;
+ }
+
+ if (b_info->device_model_version == LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN) {
+ const char *dm;
+
+ dm = libxl__domain_device_model(gc, b_info);
+ ret = access(dm, X_OK);
+ if (ret < 0) {
+ /* qemu-xen unavailable, use qemu-xen-traditional */
+ if (errno == ENOENT) {
+ LOGE(INFO, "qemu-xen is unavailable"
+ ", using qemu-xen-traditional instead");
+ b_info->device_model_version =
+ LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
+ } else {
+ LOGE(ERROR, "qemu-xen access error");
+ return ERROR_FAIL;
+ }
+ }
+ }
+
+ return 0;
+}
+
int libxl__domain_create_info_setdefault(libxl__gc *gc,
libxl_domain_create_info *c_info)
{
@@ -73,6 +120,8 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
return ERROR_INVAL;
}
+ assert(b_info->device_model_version);
+
/* Copy deprecated options to it's new position. */
rc = libxl__domain_build_info_copy_deprecated(CTX, b_info);
if (rc) {
@@ -80,45 +129,10 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
return rc;
}
- libxl_defbool_setdefault(&b_info->device_model_stubdomain, false);
-
if (libxl_defbool_val(b_info->device_model_stubdomain) &&
!b_info->device_model_ssidref)
b_info->device_model_ssidref = SECINITSID_DOMDM;
- if (!b_info->device_model_version) {
- if (b_info->type == LIBXL_DOMAIN_TYPE_HVM) {
- if (libxl_defbool_val(b_info->device_model_stubdomain)) {
- b_info->device_model_version =
- LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
- } else {
- b_info->device_model_version = libxl__default_device_model(gc);
- }
- } else {
- b_info->device_model_version =
- LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN;
- }
- if (b_info->device_model_version
- == LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN) {
- const char *dm;
-
- dm = libxl__domain_device_model(gc, b_info);
- rc = access(dm, X_OK);
- if (rc < 0) {
- /* qemu-xen unavailable, use qemu-xen-traditional */
- if (errno == ENOENT) {
- LOGE(INFO, "qemu-xen is unavailable"
- ", using qemu-xen-traditional instead");
- b_info->device_model_version =
- LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
- } else {
- LOGE(ERROR, "qemu-xen access error");
- return ERROR_FAIL;
- }
- }
- }
- }
-
if (b_info->blkdev_start == NULL)
b_info->blkdev_start = libxl__strdup(NOGC, "xvda");
@@ -938,6 +952,12 @@ static void initiate_domain_create(libxl__egc *egc,
goto error_out;
}
+ ret = libxl__domain_set_device_model(gc, d_config);
+ if (ret) {
+ LOGD(ERROR, domid, "Unable to set domain device model");
+ goto error_out;
+ }
+
ret = libxl__domain_create_info_setdefault(gc, &d_config->c_info);
if (ret) {
LOGD(ERROR, domid, "Unable to set domain create info defaults");
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 2f19786bdd..086e566311 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -2168,6 +2168,8 @@ void libxl__spawn_stub_dm(libxl__egc *egc, libxl__stub_dm_spawn_state *sdss)
dm_config->c_info.run_hotplug_scripts =
guest_config->c_info.run_hotplug_scripts;
+ ret = libxl__domain_set_device_model(gc, dm_config);
+ if (ret) goto out;
ret = libxl__domain_create_info_setdefault(gc, &dm_config->c_info);
if (ret) goto out;
ret = libxl__domain_build_info_setdefault(gc, &dm_config->b_info);
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 44e0221284..25f113404b 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1374,6 +1374,8 @@ _hidden int libxl__device_nextid(libxl__gc *gc, uint32_t domid,
_hidden int libxl__resolve_domid(libxl__gc *gc, const char *name,
uint32_t *domid);
+_hidden int libxl__domain_set_device_model(libxl__gc *gc,
+ libxl_domain_config *d_config);
/*
* For each aggregate type which can be used as an input we provide:
*
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 12+ messages in thread* [Xen-devel] [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 7:27 [PATCH v1] libxl: add helper function to set device_model_version Olaf Hering
@ 2019-05-14 7:27 ` Olaf Hering
2019-05-14 10:18 ` Roger Pau Monné
1 sibling, 0 replies; 12+ messages in thread
From: Olaf Hering @ 2019-05-14 7:27 UTC (permalink / raw)
To: xen-devel; +Cc: Wei Liu, Olaf Hering, Ian Jackson
An upcoming change will set the value of device_model_version properly
also for the non-HVM case.
Move existing code to new function libxl__domain_set_device_model.
Move also initialization for device_model_stubdomain to that function.
Make sure libxl__domain_build_info_setdefault is called with
device_model_version set.
Update libxl__spawn_stub_dm() and initiate_domain_create() to call the
new function prior libxl__domain_build_info_setdefault() because
device_mode_version is expected to be initialzed.
libxl_domain_need_memory() needs no update because it does not have a
d_config available anyway, and the callers provide a populated b_info.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
---
tools/libxl/libxl_create.c | 90 +++++++++++++++++++++++++++-----------------
tools/libxl/libxl_dm.c | 2 +
tools/libxl/libxl_internal.h | 2 +
3 files changed, 59 insertions(+), 35 deletions(-)
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 89fe80fc9c..3f0431cc84 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -27,6 +27,53 @@
#include <xen-xsm/flask/flask.h>
+int libxl__domain_set_device_model(libxl__gc *gc, libxl_domain_config *d_config)
+{
+ libxl_domain_build_info *b_info = &d_config->b_info;
+ int ret;
+
+ libxl_defbool_setdefault(&b_info->device_model_stubdomain, false);
+
+ if (b_info->device_model_version)
+ return 0;
+
+ switch (b_info->type) {
+ case LIBXL_DOMAIN_TYPE_HVM:
+ if (libxl_defbool_val(b_info->device_model_stubdomain)) {
+ b_info->device_model_version =
+ LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
+ } else {
+ b_info->device_model_version = libxl__default_device_model(gc);
+ }
+ break;
+ default:
+ b_info->device_model_version =
+ LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
+ break;
+ }
+
+ if (b_info->device_model_version == LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN) {
+ const char *dm;
+
+ dm = libxl__domain_device_model(gc, b_info);
+ ret = access(dm, X_OK);
+ if (ret < 0) {
+ /* qemu-xen unavailable, use qemu-xen-traditional */
+ if (errno == ENOENT) {
+ LOGE(INFO, "qemu-xen is unavailable"
+ ", using qemu-xen-traditional instead");
+ b_info->device_model_version =
+ LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
+ } else {
+ LOGE(ERROR, "qemu-xen access error");
+ return ERROR_FAIL;
+ }
+ }
+ }
+
+ return 0;
+}
+
int libxl__domain_create_info_setdefault(libxl__gc *gc,
libxl_domain_create_info *c_info)
{
@@ -73,6 +120,8 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
return ERROR_INVAL;
}
+ assert(b_info->device_model_version);
+
/* Copy deprecated options to it's new position. */
rc = libxl__domain_build_info_copy_deprecated(CTX, b_info);
if (rc) {
@@ -80,45 +129,10 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
return rc;
}
- libxl_defbool_setdefault(&b_info->device_model_stubdomain, false);
-
if (libxl_defbool_val(b_info->device_model_stubdomain) &&
!b_info->device_model_ssidref)
b_info->device_model_ssidref = SECINITSID_DOMDM;
- if (!b_info->device_model_version) {
- if (b_info->type == LIBXL_DOMAIN_TYPE_HVM) {
- if (libxl_defbool_val(b_info->device_model_stubdomain)) {
- b_info->device_model_version =
- LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
- } else {
- b_info->device_model_version = libxl__default_device_model(gc);
- }
- } else {
- b_info->device_model_version =
- LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN;
- }
- if (b_info->device_model_version
- == LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN) {
- const char *dm;
-
- dm = libxl__domain_device_model(gc, b_info);
- rc = access(dm, X_OK);
- if (rc < 0) {
- /* qemu-xen unavailable, use qemu-xen-traditional */
- if (errno == ENOENT) {
- LOGE(INFO, "qemu-xen is unavailable"
- ", using qemu-xen-traditional instead");
- b_info->device_model_version =
- LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN_TRADITIONAL;
- } else {
- LOGE(ERROR, "qemu-xen access error");
- return ERROR_FAIL;
- }
- }
- }
- }
-
if (b_info->blkdev_start == NULL)
b_info->blkdev_start = libxl__strdup(NOGC, "xvda");
@@ -938,6 +952,12 @@ static void initiate_domain_create(libxl__egc *egc,
goto error_out;
}
+ ret = libxl__domain_set_device_model(gc, d_config);
+ if (ret) {
+ LOGD(ERROR, domid, "Unable to set domain device model");
+ goto error_out;
+ }
+
ret = libxl__domain_create_info_setdefault(gc, &d_config->c_info);
if (ret) {
LOGD(ERROR, domid, "Unable to set domain create info defaults");
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 2f19786bdd..086e566311 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -2168,6 +2168,8 @@ void libxl__spawn_stub_dm(libxl__egc *egc, libxl__stub_dm_spawn_state *sdss)
dm_config->c_info.run_hotplug_scripts =
guest_config->c_info.run_hotplug_scripts;
+ ret = libxl__domain_set_device_model(gc, dm_config);
+ if (ret) goto out;
ret = libxl__domain_create_info_setdefault(gc, &dm_config->c_info);
if (ret) goto out;
ret = libxl__domain_build_info_setdefault(gc, &dm_config->b_info);
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 44e0221284..25f113404b 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1374,6 +1374,8 @@ _hidden int libxl__device_nextid(libxl__gc *gc, uint32_t domid,
_hidden int libxl__resolve_domid(libxl__gc *gc, const char *name,
uint32_t *domid);
+_hidden int libxl__domain_set_device_model(libxl__gc *gc,
+ libxl_domain_config *d_config);
/*
* For each aggregate type which can be used as an input we provide:
*
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 7:27 [PATCH v1] libxl: add helper function to set device_model_version Olaf Hering
2019-05-14 7:27 ` [Xen-devel] " Olaf Hering
@ 2019-05-14 10:18 ` Roger Pau Monné
2019-05-14 10:18 ` [Xen-devel] " Roger Pau Monné
2019-05-14 10:31 ` Olaf Hering
1 sibling, 2 replies; 12+ messages in thread
From: Roger Pau Monné @ 2019-05-14 10:18 UTC (permalink / raw)
To: Olaf Hering; +Cc: xen-devel, Wei Liu, Ian Jackson
On Tue, May 14, 2019 at 09:27:41AM +0200, Olaf Hering wrote:
> An upcoming change will set the value of device_model_version properly
> also for the non-HVM case.
>
> Move existing code to new function libxl__domain_set_device_model.
> Move also initialization for device_model_stubdomain to that function.
> Make sure libxl__domain_build_info_setdefault is called with
> device_model_version set.
>
> Update libxl__spawn_stub_dm() and initiate_domain_create() to call the
> new function prior libxl__domain_build_info_setdefault() because
> device_mode_version is expected to be initialzed.
That's all fine, but this just describes the changes performed below
without providing a reasoning on why those changes are needed. Why is
it not fine to set the device model version in
libxl__domain_build_info_setdefault?
> @@ -938,6 +952,12 @@ static void initiate_domain_create(libxl__egc *egc,
> goto error_out;
> }
>
> + ret = libxl__domain_set_device_model(gc, d_config);
> + if (ret) {
> + LOGD(ERROR, domid, "Unable to set domain device model");
> + goto error_out;
> + }
Can you place the call to libxl__domain_set_device_model at the top
(or a suitable place) of libxl__domain_build_info_setdefault instead
of adding a call in initiate_domain_create?
> +
> ret = libxl__domain_create_info_setdefault(gc, &d_config->c_info);
> if (ret) {
> LOGD(ERROR, domid, "Unable to set domain create info defaults");
> diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
> index 2f19786bdd..086e566311 100644
> --- a/tools/libxl/libxl_dm.c
> +++ b/tools/libxl/libxl_dm.c
> @@ -2168,6 +2168,8 @@ void libxl__spawn_stub_dm(libxl__egc *egc, libxl__stub_dm_spawn_state *sdss)
> dm_config->c_info.run_hotplug_scripts =
> guest_config->c_info.run_hotplug_scripts;
>
> + ret = libxl__domain_set_device_model(gc, dm_config);
> + if (ret) goto out;
> ret = libxl__domain_create_info_setdefault(gc, &dm_config->c_info);
> if (ret) goto out;
> ret = libxl__domain_build_info_setdefault(gc, &dm_config->b_info);
Same here, AFAICT the call to libxl__domain_set_device_model could be
placed inside of libxl__domain_build_info_setdefault?
Thanks, Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [Xen-devel] [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 10:18 ` Roger Pau Monné
@ 2019-05-14 10:18 ` Roger Pau Monné
2019-05-14 10:31 ` Olaf Hering
1 sibling, 0 replies; 12+ messages in thread
From: Roger Pau Monné @ 2019-05-14 10:18 UTC (permalink / raw)
To: Olaf Hering; +Cc: xen-devel, Wei Liu, Ian Jackson
On Tue, May 14, 2019 at 09:27:41AM +0200, Olaf Hering wrote:
> An upcoming change will set the value of device_model_version properly
> also for the non-HVM case.
>
> Move existing code to new function libxl__domain_set_device_model.
> Move also initialization for device_model_stubdomain to that function.
> Make sure libxl__domain_build_info_setdefault is called with
> device_model_version set.
>
> Update libxl__spawn_stub_dm() and initiate_domain_create() to call the
> new function prior libxl__domain_build_info_setdefault() because
> device_mode_version is expected to be initialzed.
That's all fine, but this just describes the changes performed below
without providing a reasoning on why those changes are needed. Why is
it not fine to set the device model version in
libxl__domain_build_info_setdefault?
> @@ -938,6 +952,12 @@ static void initiate_domain_create(libxl__egc *egc,
> goto error_out;
> }
>
> + ret = libxl__domain_set_device_model(gc, d_config);
> + if (ret) {
> + LOGD(ERROR, domid, "Unable to set domain device model");
> + goto error_out;
> + }
Can you place the call to libxl__domain_set_device_model at the top
(or a suitable place) of libxl__domain_build_info_setdefault instead
of adding a call in initiate_domain_create?
> +
> ret = libxl__domain_create_info_setdefault(gc, &d_config->c_info);
> if (ret) {
> LOGD(ERROR, domid, "Unable to set domain create info defaults");
> diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
> index 2f19786bdd..086e566311 100644
> --- a/tools/libxl/libxl_dm.c
> +++ b/tools/libxl/libxl_dm.c
> @@ -2168,6 +2168,8 @@ void libxl__spawn_stub_dm(libxl__egc *egc, libxl__stub_dm_spawn_state *sdss)
> dm_config->c_info.run_hotplug_scripts =
> guest_config->c_info.run_hotplug_scripts;
>
> + ret = libxl__domain_set_device_model(gc, dm_config);
> + if (ret) goto out;
> ret = libxl__domain_create_info_setdefault(gc, &dm_config->c_info);
> if (ret) goto out;
> ret = libxl__domain_build_info_setdefault(gc, &dm_config->b_info);
Same here, AFAICT the call to libxl__domain_set_device_model could be
placed inside of libxl__domain_build_info_setdefault?
Thanks, Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 10:18 ` Roger Pau Monné
2019-05-14 10:18 ` [Xen-devel] " Roger Pau Monné
@ 2019-05-14 10:31 ` Olaf Hering
2019-05-14 10:31 ` [Xen-devel] " Olaf Hering
2019-05-14 10:39 ` Roger Pau Monné
1 sibling, 2 replies; 12+ messages in thread
From: Olaf Hering @ 2019-05-14 10:31 UTC (permalink / raw)
To: Roger Pau Monné; +Cc: xen-devel, Wei Liu, Ian Jackson
[-- Attachment #1.1: Type: text/plain, Size: 315 bytes --]
Am Tue, 14 May 2019 12:18:56 +0200
schrieb Roger Pau Monné <roger.pau@citrix.com>:
> Why is it not fine to set the device model version in
> libxl__domain_build_info_setdefault?
Because it receives just build_info, which lacks all the data to decide
if a device type needs a device model or not.
Olaf
[-- Attachment #1.2: Digitale Signatur von OpenPGP --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xen-devel] [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 10:31 ` Olaf Hering
@ 2019-05-14 10:31 ` Olaf Hering
2019-05-14 10:39 ` Roger Pau Monné
1 sibling, 0 replies; 12+ messages in thread
From: Olaf Hering @ 2019-05-14 10:31 UTC (permalink / raw)
To: Roger Pau Monné; +Cc: xen-devel, Wei Liu, Ian Jackson
[-- Attachment #1.1: Type: text/plain, Size: 315 bytes --]
Am Tue, 14 May 2019 12:18:56 +0200
schrieb Roger Pau Monné <roger.pau@citrix.com>:
> Why is it not fine to set the device model version in
> libxl__domain_build_info_setdefault?
Because it receives just build_info, which lacks all the data to decide
if a device type needs a device model or not.
Olaf
[-- Attachment #1.2: Digitale Signatur von OpenPGP --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 10:31 ` Olaf Hering
2019-05-14 10:31 ` [Xen-devel] " Olaf Hering
@ 2019-05-14 10:39 ` Roger Pau Monné
2019-05-14 10:39 ` [Xen-devel] " Roger Pau Monné
2019-05-14 14:32 ` Wei Liu
1 sibling, 2 replies; 12+ messages in thread
From: Roger Pau Monné @ 2019-05-14 10:39 UTC (permalink / raw)
To: Olaf Hering; +Cc: xen-devel, Wei Liu, Ian Jackson
On Tue, May 14, 2019 at 12:31:18PM +0200, Olaf Hering wrote:
> Am Tue, 14 May 2019 12:18:56 +0200
> schrieb Roger Pau Monné <roger.pau@citrix.com>:
>
> > Why is it not fine to set the device model version in
> > libxl__domain_build_info_setdefault?
>
> Because it receives just build_info, which lacks all the data to decide
> if a device type needs a device model or not.
Gah, thanks. Could you please add this to the commit message? Or else
it's likely I will ask again.
With that:
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xen-devel] [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 10:39 ` Roger Pau Monné
@ 2019-05-14 10:39 ` Roger Pau Monné
2019-05-14 14:32 ` Wei Liu
1 sibling, 0 replies; 12+ messages in thread
From: Roger Pau Monné @ 2019-05-14 10:39 UTC (permalink / raw)
To: Olaf Hering; +Cc: xen-devel, Wei Liu, Ian Jackson
On Tue, May 14, 2019 at 12:31:18PM +0200, Olaf Hering wrote:
> Am Tue, 14 May 2019 12:18:56 +0200
> schrieb Roger Pau Monné <roger.pau@citrix.com>:
>
> > Why is it not fine to set the device model version in
> > libxl__domain_build_info_setdefault?
>
> Because it receives just build_info, which lacks all the data to decide
> if a device type needs a device model or not.
Gah, thanks. Could you please add this to the commit message? Or else
it's likely I will ask again.
With that:
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 10:39 ` Roger Pau Monné
2019-05-14 10:39 ` [Xen-devel] " Roger Pau Monné
@ 2019-05-14 14:32 ` Wei Liu
2019-05-14 14:32 ` [Xen-devel] " Wei Liu
2019-05-15 9:13 ` Olaf Hering
1 sibling, 2 replies; 12+ messages in thread
From: Wei Liu @ 2019-05-14 14:32 UTC (permalink / raw)
To: Roger Pau Monné; +Cc: xen-devel, Olaf Hering, Wei Liu, Ian Jackson
On Tue, May 14, 2019 at 12:39:07PM +0200, Roger Pau Monné wrote:
> On Tue, May 14, 2019 at 12:31:18PM +0200, Olaf Hering wrote:
> > Am Tue, 14 May 2019 12:18:56 +0200
> > schrieb Roger Pau Monné <roger.pau@citrix.com>:
> >
> > > Why is it not fine to set the device model version in
> > > libxl__domain_build_info_setdefault?
> >
> > Because it receives just build_info, which lacks all the data to decide
> > if a device type needs a device model or not.
>
> Gah, thanks. Could you please add this to the commit message? Or else
> it's likely I will ask again.
>
> With that:
>
> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Olaf, if you can provide me with an updated version of the commit
message I can fold that in while committing. No need to resend this
patch.
Wei.
>
> Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Xen-devel] [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 14:32 ` Wei Liu
@ 2019-05-14 14:32 ` Wei Liu
2019-05-15 9:13 ` Olaf Hering
1 sibling, 0 replies; 12+ messages in thread
From: Wei Liu @ 2019-05-14 14:32 UTC (permalink / raw)
To: Roger Pau Monné; +Cc: xen-devel, Olaf Hering, Wei Liu, Ian Jackson
On Tue, May 14, 2019 at 12:39:07PM +0200, Roger Pau Monné wrote:
> On Tue, May 14, 2019 at 12:31:18PM +0200, Olaf Hering wrote:
> > Am Tue, 14 May 2019 12:18:56 +0200
> > schrieb Roger Pau Monné <roger.pau@citrix.com>:
> >
> > > Why is it not fine to set the device model version in
> > > libxl__domain_build_info_setdefault?
> >
> > Because it receives just build_info, which lacks all the data to decide
> > if a device type needs a device model or not.
>
> Gah, thanks. Could you please add this to the commit message? Or else
> it's likely I will ask again.
>
> With that:
>
> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Olaf, if you can provide me with an updated version of the commit
message I can fold that in while committing. No need to resend this
patch.
Wei.
>
> Roger.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v1] libxl: add helper function to set device_model_version
2019-05-14 14:32 ` Wei Liu
2019-05-14 14:32 ` [Xen-devel] " Wei Liu
@ 2019-05-15 9:13 ` Olaf Hering
2019-05-15 9:13 ` [Xen-devel] " Olaf Hering
1 sibling, 1 reply; 12+ messages in thread
From: Olaf Hering @ 2019-05-15 9:13 UTC (permalink / raw)
To: Wei Liu; +Cc: xen-devel, Ian Jackson, Roger Pau Monné
[-- Attachment #1.1: Type: text/plain, Size: 435 bytes --]
Am Tue, 14 May 2019 15:32:27 +0100
schrieb Wei Liu <wei.liu2@citrix.com>:
> Olaf, if you can provide me with an updated version of the commit
> message I can fold that in while committing. No need to resend this
> patch.
Maybe just append this paragraph?
The upcoming change needs a full libxl_domain_config, and the existing
libxl__domain_build_info_setdefault has just a libxl_domain_build_info
to work with.
Olaf
[-- Attachment #1.2: Digitale Signatur von OpenPGP --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2019-05-15 9:14 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-14 7:27 [PATCH v1] libxl: add helper function to set device_model_version Olaf Hering
2019-05-14 7:27 ` [Xen-devel] " Olaf Hering
2019-05-14 10:18 ` Roger Pau Monné
2019-05-14 10:18 ` [Xen-devel] " Roger Pau Monné
2019-05-14 10:31 ` Olaf Hering
2019-05-14 10:31 ` [Xen-devel] " Olaf Hering
2019-05-14 10:39 ` Roger Pau Monné
2019-05-14 10:39 ` [Xen-devel] " Roger Pau Monné
2019-05-14 14:32 ` Wei Liu
2019-05-14 14:32 ` [Xen-devel] " Wei Liu
2019-05-15 9:13 ` Olaf Hering
2019-05-15 9:13 ` [Xen-devel] " Olaf Hering
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).