* [U-Boot] Please pull u-boot-marvell/master
@ 2018-12-09 10:15 Stefan Roese
2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
0 siblings, 2 replies; 130+ messages in thread
From: Stefan Roese @ 2018-12-09 10:15 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the 2nd batch of Marvell / MVEBU patches:
----------------------------------------------------------------
- Sync DDR training with Marvell code for Armada 38x by Chris
- Misc updates to Armada 38x Helios4 board by Aditya
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 3589025867274ff28f689029ab8323301771c8ec:
Merge branch '2018-12-06-master-imports' (2018-12-07 10:55:12 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 5ca84c6dd2b3060471171cce3f76d8af35060c0b:
arm: mvebu: helios4: Reset uSOM onboard phy during board init (2018-12-08 16:19:41 +0100)
----------------------------------------------------------------
Aditya Prayoga (6):
arm: mvebu: helios4: mmc: move environment before 1M
arm: mvebu: helios4: Enable I2C and IO Expander
arm: mvebu: helios4: Enable mvebu GPIO
arm: mvebu: helios4: Reduce U-Boot image size
arm: mvebu: helios4: Enable SPI flash support
arm: mvebu: helios4: Reset uSOM onboard phy during board init
Chris Packham (1):
ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02
arch/arm/dts/armada-388-helios4-u-boot.dtsi | 22 +
board/CZ.NIC/turris_omnia/turris_omnia.c | 4 +-
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 2 +-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 2 +-
board/gdsys/a38x/controlcenterdc.c | 2 +-
board/kobol/helios4/helios4.c | 34 +-
board/solidrun/clearfog/clearfog.c | 2 +-
configs/helios4_defconfig | 13 +-
drivers/ddr/marvell/a38x/ddr3_debug.c | 414 ++----------------
drivers/ddr/marvell/a38x/ddr3_init.c | 91 +---
drivers/ddr/marvell/a38x/ddr3_init.h | 43 +-
drivers/ddr/marvell/a38x/ddr3_topology_def.h | 78 ----
drivers/ddr/marvell/a38x/ddr3_training.c | 484 +++++++++++----------
drivers/ddr/marvell/a38x/ddr3_training_bist.c | 1 +
.../marvell/a38x/ddr3_training_centralization.c | 3 +
drivers/ddr/marvell/a38x/ddr3_training_db.c | 172 +++++---
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 1 +
drivers/ddr/marvell/a38x/ddr3_training_ip.h | 38 --
drivers/ddr/marvell/a38x/ddr3_training_ip_def.h | 31 --
drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c | 2 +
drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h | 1 +
drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h | 91 +---
drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h | 10 +-
drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 75 ++--
drivers/ddr/marvell/a38x/ddr3_training_leveling.h | 1 -
drivers/ddr/marvell/a38x/ddr3_training_pbs.c | 7 +-
drivers/ddr/marvell/a38x/ddr_topology_def.h | 107 ++++-
drivers/ddr/marvell/a38x/ddr_training_ip_db.h | 2 -
drivers/ddr/marvell/a38x/dram_if.h | 13 +
drivers/ddr/marvell/a38x/mv_ddr_build_message.c | 2 +-
drivers/ddr/marvell/a38x/mv_ddr_common.h | 38 +-
drivers/ddr/marvell/a38x/mv_ddr_plat.c | 181 ++++----
drivers/ddr/marvell/a38x/mv_ddr_plat.h | 12 +-
drivers/ddr/marvell/a38x/mv_ddr_regs.h | 19 +
drivers/ddr/marvell/a38x/mv_ddr_spd.c | 16 +-
drivers/ddr/marvell/a38x/mv_ddr_topology.c | 215 +++++++--
drivers/ddr/marvell/a38x/mv_ddr_topology.h | 214 ++++++++-
drivers/ddr/marvell/a38x/mv_ddr_training_db.h | 40 ++
drivers/ddr/marvell/a38x/xor.c | 8 +-
include/configs/helios4.h | 48 +-
40 files changed, 1227 insertions(+), 1312 deletions(-)
create mode 100644 arch/arm/dts/armada-388-helios4-u-boot.dtsi
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_topology_def.h
create mode 100644 drivers/ddr/marvell/a38x/dram_if.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_training_db.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-12-09 10:15 [U-Boot] Please pull u-boot-marvell/master Stefan Roese
@ 2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
1 sibling, 0 replies; 130+ messages in thread
From: Chris Packham @ 2018-12-09 21:44 UTC (permalink / raw)
To: u-boot
Hi Tom, Stefan,
On Sun, Dec 9, 2018 at 11:16 PM Stefan Roese <sr@denx.de> wrote:
>
> Hi Tom,
>
> please pull the 2nd batch of Marvell / MVEBU patches:
>
> ----------------------------------------------------------------
> - Sync DDR training with Marvell code for Armada 38x by Chris
> - Misc updates to Armada 38x Helios4 board by Aditya
> ----------------------------------------------------------------
>
> Thanks,
> Stefan
>
>
> The following changes since commit 3589025867274ff28f689029ab8323301771c8ec:
>
> Merge branch '2018-12-06-master-imports' (2018-12-07 10:55:12 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 5ca84c6dd2b3060471171cce3f76d8af35060c0b:
>
> arm: mvebu: helios4: Reset uSOM onboard phy during board init (2018-12-08 16:19:41 +0100)
>
> ----------------------------------------------------------------
> Aditya Prayoga (6):
> arm: mvebu: helios4: mmc: move environment before 1M
> arm: mvebu: helios4: Enable I2C and IO Expander
> arm: mvebu: helios4: Enable mvebu GPIO
> arm: mvebu: helios4: Reduce U-Boot image size
> arm: mvebu: helios4: Enable SPI flash support
> arm: mvebu: helios4: Reset uSOM onboard phy during board init
>
> Chris Packham (1):
> ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02
I just noticed I managed to delete the license from 2 of the files.
I've just posted a patch to correct this [1]. I'm not sure if you want
Stefan to squash it into the original and re-submit or just apply it
directly to u-boot master. Sorry for the hassle.
[1] - http://patchwork.ozlabs.org/patch/1010175/
>
> arch/arm/dts/armada-388-helios4-u-boot.dtsi | 22 +
> board/CZ.NIC/turris_omnia/turris_omnia.c | 4 +-
> board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 2 +-
> board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 2 +-
> board/gdsys/a38x/controlcenterdc.c | 2 +-
> board/kobol/helios4/helios4.c | 34 +-
> board/solidrun/clearfog/clearfog.c | 2 +-
> configs/helios4_defconfig | 13 +-
> drivers/ddr/marvell/a38x/ddr3_debug.c | 414 ++----------------
> drivers/ddr/marvell/a38x/ddr3_init.c | 91 +---
> drivers/ddr/marvell/a38x/ddr3_init.h | 43 +-
> drivers/ddr/marvell/a38x/ddr3_topology_def.h | 78 ----
> drivers/ddr/marvell/a38x/ddr3_training.c | 484 +++++++++++----------
> drivers/ddr/marvell/a38x/ddr3_training_bist.c | 1 +
> .../marvell/a38x/ddr3_training_centralization.c | 3 +
> drivers/ddr/marvell/a38x/ddr3_training_db.c | 172 +++++---
> drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 1 +
> drivers/ddr/marvell/a38x/ddr3_training_ip.h | 38 --
> drivers/ddr/marvell/a38x/ddr3_training_ip_def.h | 31 --
> drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c | 2 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h | 1 +
> drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h | 91 +---
> drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h | 10 +-
> drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 75 ++--
> drivers/ddr/marvell/a38x/ddr3_training_leveling.h | 1 -
> drivers/ddr/marvell/a38x/ddr3_training_pbs.c | 7 +-
> drivers/ddr/marvell/a38x/ddr_topology_def.h | 107 ++++-
> drivers/ddr/marvell/a38x/ddr_training_ip_db.h | 2 -
> drivers/ddr/marvell/a38x/dram_if.h | 13 +
> drivers/ddr/marvell/a38x/mv_ddr_build_message.c | 2 +-
> drivers/ddr/marvell/a38x/mv_ddr_common.h | 38 +-
> drivers/ddr/marvell/a38x/mv_ddr_plat.c | 181 ++++----
> drivers/ddr/marvell/a38x/mv_ddr_plat.h | 12 +-
> drivers/ddr/marvell/a38x/mv_ddr_regs.h | 19 +
> drivers/ddr/marvell/a38x/mv_ddr_spd.c | 16 +-
> drivers/ddr/marvell/a38x/mv_ddr_topology.c | 215 +++++++--
> drivers/ddr/marvell/a38x/mv_ddr_topology.h | 214 ++++++++-
> drivers/ddr/marvell/a38x/mv_ddr_training_db.h | 40 ++
> drivers/ddr/marvell/a38x/xor.c | 8 +-
> include/configs/helios4.h | 48 +-
> 40 files changed, 1227 insertions(+), 1312 deletions(-)
> create mode 100644 arch/arm/dts/armada-388-helios4-u-boot.dtsi
> delete mode 100644 drivers/ddr/marvell/a38x/ddr3_topology_def.h
> create mode 100644 drivers/ddr/marvell/a38x/dram_if.h
> create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_training_db.h
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-12-09 10:15 [U-Boot] Please pull u-boot-marvell/master Stefan Roese
2018-12-09 21:44 ` Chris Packham
@ 2018-12-09 22:11 ` Tom Rini
1 sibling, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-12-09 22:11 UTC (permalink / raw)
To: u-boot
On Sun, Dec 09, 2018 at 11:15:46AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the 2nd batch of Marvell / MVEBU patches:
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181209/6e9a1320/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-11-14 7:39 Stefan Roese
2019-11-18 2:14 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-11-14 7:39 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following MVEBU related fixes:
----------------------------------------------------------------
- Clearfog: Fix SD card booting (Baruch)
- Fix potential dereference NULL pointer in dram_init() (Chris)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 3ff1ff3ff76c15efe0451309af084ee6c096c583:
Merge branch '2019-11-12-migrate-SYS_REDUNDAND_ENVIRONMENT' (2019-11-12 13:40:58 -0500)
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to 70bae02f71d4d4f7bfadd4f68f0823a453bbd7e6:
arm: mvebu: clearfog: fix boot from SD card (2019-11-14 08:28:39 +0100)
----------------------------------------------------------------
Baruch Siach (1):
arm: mvebu: clearfog: fix boot from SD card
Chris Packham (1):
ARM: mvebu: don't dereference null bd pointer
arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 4 ++++
arch/arm/mach-mvebu/dram.c | 10 ----------
2 files changed, 4 insertions(+), 10 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-08-12 12:08 Stefan Roese
2019-08-13 16:50 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-08-12 12:08 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the first Marvell patches in this merge window with the
following changes:
----------------------------------------------------------------
- Various improvements to Keymile boards - mostly DT conversation
(Pascal & Holger)
- Removal of now unsupported Keymile boards (Pascal & Holger)
- Small MVEBU PCI fix (Marek)
- Turris Omnia defconfig update (Marek)
- Misc Allied Telesis defconfig updates (Chris)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit feb5a02f869d5678190dfc915ef6c2781b4f7a6c:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-08-10 17:57:58 -0400)
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to 193a1e9f196b7fb7e913a70936c8a49060a1859c:
pci: pci_mvebu: set BAR0 after memory space is set (2019-08-12 13:59:31 +0200)
----------------------------------------------------------------
Chris Packham (1):
ARM: configs: Enable DM_ETH for SBx81LIFKW and SBx81LIFXCAT
Holger Brunck (2):
powerpc/km: remove unmaintained target KMVECT1
powerpc/km: remove unmaintained board KMLION1
Marek Behún (2):
arm: mvebu: turris_omnia: update defconfig
pci: pci_mvebu: set BAR0 after memory space is set
Pascal Linder (7):
km: add Kconfig menus for KM boards
km: remove obsolete definitions in KM header files
km: clean up header files for KM Kirkwood boards
km: fixed typo in KM Kirkwood header file
km/uart: port UART interface of KM Kirkwood boards to driver model
km/rgmii: port Ethernet interface of KM Kirkwood boards to driver model
km/arm: remove unmaintained target PORTL2
arch/arm/dts/kirkwood-km_common.dtsi | 1 +
arch/powerpc/cpu/mpc83xx/Kconfig | 4 -
board/keymile/Kconfig | 101 +++++++++
board/keymile/common/common.h | 4 -
board/keymile/common/ivm.c | 5 -
board/keymile/km83xx/Kconfig | 19 --
board/keymile/km83xx/MAINTAINERS | 1 -
board/keymile/km83xx/km83xx.c | 81 -------
board/keymile/km_arm/Kconfig | 31 +++
board/keymile/km_arm/MAINTAINERS | 1 -
board/keymile/kmp204x/MAINTAINERS | 1 -
configs/SBx81LIFKW_defconfig | 3 +
configs/SBx81LIFXCAT_defconfig | 3 +
configs/km_kirkwood_pci_defconfig | 1 +
configs/kmcoge5un_defconfig | 3 +
configs/kmlion1_defconfig | 57 -----
configs/kmnusa_defconfig | 4 +
configs/kmsugp1_defconfig | 4 +
configs/kmsuv31_defconfig | 2 +
configs/kmvect1_defconfig | 180 ---------------
configs/mgcoge3un_defconfig | 2 +
configs/portl2_defconfig | 46 ----
configs/turris_omnia_defconfig | 3 +
drivers/pci/pci_mvebu.c | 8 +-
include/configs/km/keymile-common.h | 8 -
include/configs/km/km-mpc83xx.h | 4 -
include/configs/km/km-powerpc.h | 13 --
include/configs/km/km_arm.h | 54 +----
include/configs/km/kmp204x-common.h | 409 ----------------------------------
include/configs/km_kirkwood.h | 28 +--
include/configs/kmp204x.h | 410 +++++++++++++++++++++++++++++++++--
include/configs/kmvect1.h | 61 ------
scripts/config_whitelist.txt | 22 --
33 files changed, 554 insertions(+), 1020 deletions(-)
delete mode 100644 configs/kmlion1_defconfig
delete mode 100644 configs/kmvect1_defconfig
delete mode 100644 configs/portl2_defconfig
delete mode 100644 include/configs/km/kmp204x-common.h
delete mode 100644 include/configs/kmvect1.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-07-11 16:01 Stefan Roese
2019-07-12 13:32 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-07-11 16:01 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches:
----------------------------------------------------------------
- SPL SATA enhancements to allow booting from RAW SATA device
needed for Clearfog (Baruch)
- Enable SATA booting on Clearfog (Baruch)
- Misc changes to Turris Omnia (Marek)
- Enable CMD_BOOTZ and increase SYS_BOOTM_LEN on crs305-1g-4s
(Luka)
- Enable FIT support for db-xc3-24g4xg (Chris)
- Enable DM_SPI on Keymile Kirkwood board with necessary changes
for this (Pascal)
- Set 38x and 39x AVS on lower frequency (Baruch)
----------------------------------------------------------------
Here the Travis build, without any issues:
https://travis-ci.org/stroese/u-boot/builds/557220799
Thanks,
Stefan
The following changes since commit ef8b7e045ec744dce385cac4b1438c9be6e2bbc8:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-i2c (2019-07-10 13:51:53 -0400)
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to cc66ebdeeca5c4ed095bbd521b748bb009d99728:
arm: mvebu: set 38x and 39x AVS on lower frequency (2019-07-11 10:58:03 +0200)
----------------------------------------------------------------
Baruch Siach (9):
spl: sata: add default partition and image name
spl: sata: fix build with DM_SCSI
spl: sata: don't force FS_FAT support
arm: mvebu: fix ahci mbus config in SPL
arm: mvebu: add support for boot from SATA
arm: mvebu: clearfog: enable SATA in SPL
arm: mvebu: clearfog: set U-Boot offset for SATA boot
arm: mvebu: clearfog: document boot from SATA
arm: mvebu: set 38x and 39x AVS on lower frequency
Chris Packham (1):
ARM: mvebu: Enable FIT support for db-xc3-24g4xg
Luka Kovacic (1):
arm: mvebu: crs305-1g-4s: Enable CMD_BOOTZ and increase SYS_BOOTM_LEN
Marek Behún (7):
arm: mvebu: turris_omnia: set default ethernet adapter
arm: mvebu: turris_omnia: fix adapters MAC addresses
arm: mvebu: turris_omnia: change environment address in SPI flash
arm: mvebu: turris_omnia: remove unneeded macro from board config
arm: mvebu: turris_omnia: prefer SCSI booting before USB
arm: mvebu: turris_omnia: call pci_init from board init code
arm: mvebu: turris_omnia: fix rescue mode bootcmd bootargs setting
Pascal Linder (6):
km: modify Kconfig file organization for KM boards
km/spi: add weak functions to kirkwood_spi driver (DM part)
km/spi: overwrite kirkwood_spi weak functions for KM Kirkwood boards
km/spi: add SPI configuration to KM Kirkwood device tree
km/spi: activate driver model for SPI flash on KM Kirkwood boards
km/spi: remove deprecated SPI flash driver code for KM Kirkwood boards
arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 8 ++++
arch/arm/dts/kirkwood-km_kirkwood.dts | 22 ++++++++++
arch/arm/include/asm/arch-mvebu/spi.h | 11 -----
arch/arm/mach-kirkwood/Kconfig | 9 ++--
arch/arm/mach-mvebu/Kconfig | 5 +++
arch/arm/mach-mvebu/Makefile | 3 ++
arch/arm/mach-mvebu/cpu.c | 4 ++
arch/arm/mach-mvebu/include/mach/cpu.h | 7 +++
arch/arm/mach-mvebu/include/mach/soc.h | 2 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 26 +++++++++++
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 4 ++
arch/arm/mach-mvebu/spl.c | 8 ++++
arch/powerpc/cpu/mpc83xx/Kconfig | 44 +++++--------------
arch/powerpc/cpu/mpc85xx/Kconfig | 8 +---
board/CZ.NIC/turris_omnia/turris_omnia.c | 10 +++--
board/keymile/Kconfig | 16 +++++++
board/keymile/km83xx/Kconfig | 62 +++++++++++++++++++++++++++
board/keymile/km_arm/Kconfig | 10 +++++
board/keymile/km_arm/km_arm.c | 23 +++++++++-
board/keymile/kmp204x/Kconfig | 8 ++++
board/solidrun/clearfog/README | 6 +++
common/spl/spl_sata.c | 20 +++++++--
configs/crs305-1g-4s_defconfig | 1 +
configs/db-xc3-24g4xg_defconfig | 3 ++
configs/portl2_defconfig | 3 +-
drivers/spi/kirkwood_spi.c | 52 +++++++---------------
include/configs/clearfog.h | 2 +-
include/configs/crs305-1g-4s.h | 1 +
include/configs/km/km_arm.h | 5 ---
include/configs/turris_omnia.h | 12 ++----
scripts/config_whitelist.txt | 1 -
31 files changed, 279 insertions(+), 117 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-06-04 6:39 Stefan Roese
2019-06-05 14:24 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-06-04 6:39 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related fix:
----------------------------------------------------------------
- Enable MMC in SPL to enable DM MMC booting on helios4 (Dennis)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 55cae6458d51294f4ded1d9d2339dfed5afa90ed:
Merge branch 'master' of git://git.denx.de/u-boot-net (2019-06-02 08:33:10 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 7505075dffb8bf0584f01872fea476bcd03978b9:
arm: mvebu: helios4: add MMC to SPL DT (2019-06-04 08:33:24 +0200)
----------------------------------------------------------------
Dennis Gilmore (1):
arm: mvebu: helios4: add MMC to SPL DT
arch/arm/dts/armada-388-helios4-u-boot.dtsi | 4 ++++
1 file changed, 4 insertions(+)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-05-27 11:35 Stefan Roese
2019-05-27 18:35 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-05-27 11:35 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related fix:
----------------------------------------------------------------
- defconfig updates to remove the DM-move build warnings
for helios4 and controlcenterdc (Mario & Stefan)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 344a0e4367d0820b8eb2ea4a90132433e038095f:
configs: Resync with savedefconfig (2019-05-26 14:45:25 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 0a60da960fead40a73e306ac5e6b5e399329a5d1:
arm: mvebu: controlcenterdc: Update config (2019-05-27 13:31:04 +0200)
----------------------------------------------------------------
Mario Six (1):
arm: mvebu: controlcenterdc: Update config
Stefan Roese (1):
arm: mvebu: helios4: Enable CONFIG_BLK and CONFIG_DM_MMC
configs/controlcenterdc_defconfig | 2 ++
configs/helios4_defconfig | 1 +
2 files changed, 3 insertions(+)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-05-20 7:59 Stefan Roese
2019-05-20 17:53 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-05-20 7:59 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related fix:
----------------------------------------------------------------
- Fix SPL build on Armada XP (theadorable etc) (Stefan)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit e14d9ca4919e5bc987fc628135104f2b2c91af90:
Merge git://git.denx.de/u-boot-x86 (2019-05-19 09:42:19 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 1718a9f3b7882c6a1a751d84c58fcd7c8bdb0365:
arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs" (2019-05-20 09:27:36 +0200)
----------------------------------------------------------------
Stefan Roese (1):
arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"
arch/arm/dts/armada-370-xp.dtsi | 1 +
1 file changed, 1 insertion(+)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-05-09 10:08 Stefan Roese
2019-05-09 22:25 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-05-09 10:08 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches:
----------------------------------------------------------------
- DM updates for multiple MVEBU boards (Stefan)
- Add CRS305-1G-4S board (Luka)
- Enable MMC in SPL on clearfog (Baruch)
----------------------------------------------------------------
Here the Travis build, without any issues:
https://travis-ci.org/stroese/u-boot/builds/530119803
Thanks,
Stefan
The following changes since commit 504bf790da08db9b4a443566cf6ef577f9c7996a:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2019-05-08 16:21:43 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 13cba82b51f57e9a06ebf3d9490e1f682e55ed97:
arm: mvebu: clearfog: add MMC to SPL DT (2019-05-09 07:35:04 +0200)
----------------------------------------------------------------
Baruch Siach (1):
arm: mvebu: clearfog: add MMC to SPL DT
Luka Kovacic (1):
arm: mvebu: Add CRS305-1G-4S board
Stefan Roese (3):
arm: mvebu: clearfog: Enable BLK and DM support
arm: mvebu: db-88f6720: Enable CONFIG_BLK
arm: mvebu: db-88f6820-gp: Enable BLK and DM support
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 4 +
arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi | 13 +++
arch/arm/dts/armada-xp-crs305-1g-4s.dts | 110 ++++++++++++++++++++++++
arch/arm/mach-mvebu/Kconfig | 7 ++
board/mikrotik/crs305-1g-4s/.gitignore | 1 +
board/mikrotik/crs305-1g-4s/MAINTAINERS | 7 ++
board/mikrotik/crs305-1g-4s/Makefile | 14 +++
board/mikrotik/crs305-1g-4s/README | 23 +++++
board/mikrotik/crs305-1g-4s/binary.0 | 11 +++
board/mikrotik/crs305-1g-4s/crs305-1g-4s.c | 75 ++++++++++++++++
board/mikrotik/crs305-1g-4s/kwbimage.cfg.in | 12 +++
configs/clearfog_defconfig | 4 +-
configs/crs305-1g-4s_defconfig | 52 +++++++++++
configs/db-88f6720_defconfig | 1 +
configs/db-88f6820-gp_defconfig | 4 +-
include/configs/crs305-1g-4s.h | 37 ++++++++
17 files changed, 375 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-xp-crs305-1g-4s.dts
create mode 100644 board/mikrotik/crs305-1g-4s/.gitignore
create mode 100644 board/mikrotik/crs305-1g-4s/MAINTAINERS
create mode 100644 board/mikrotik/crs305-1g-4s/Makefile
create mode 100644 board/mikrotik/crs305-1g-4s/README
create mode 100644 board/mikrotik/crs305-1g-4s/binary.0
create mode 100644 board/mikrotik/crs305-1g-4s/crs305-1g-4s.c
create mode 100644 board/mikrotik/crs305-1g-4s/kwbimage.cfg.in
create mode 100644 configs/crs305-1g-4s_defconfig
create mode 100644 include/configs/crs305-1g-4s.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-05-03 11:49 Stefan Roese
2019-05-04 17:01 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-05-03 11:49 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches:
----------------------------------------------------------------
- Fix in kwbimage (return code checking) (Young Xiao)
- Misc updates to Turris Omnia (Marek)
----------------------------------------------------------------
Here the Travis build, without any issues:
https://travis-ci.org/stroese/u-boot/builds/527629166
Thanks,
Stefan
The following changes since commit b4ee6daad7a2604ca9466b2ba48de86cc27d381f:
Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx (2019-05-01 07:25:51 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 5859a39a43d15cb775478bd4537e9a2eac1c4cf2:
arm: mvebu: turris_omnia: enable defconfig options needed by vendor (2019-05-03 08:18:00 +0200)
----------------------------------------------------------------
Marek Behún (17):
arm: mvebu: turris_omnia: remove redundant code
arm: mvebu: turris_omnia: add XHCI to defconfig
arm: mvebu: turris_omnia: use AHCI and SATA driver model
arm: mvebu: turris_omnia: remove legacy macros from board header
arm: mvebu: turris_omnia: move I2C dependencies to Kconfig
arm: mvebu: turris_omnia: add SCSI as boot target
arm: mvebu: turris_omnia: refactor I2C accessing code
arm: mvebu: turris_omnia: fix checkpatch warnings
arm: mvebu: turris_omnia: move ATSHA204A from defconfig to Kconfig
arm: mvebu: turris_omnia: refactor more code
arm: mvebu: turris_omnia: print board info as Turris Mox
arm: mvebu: turris_*: remove watchdog include
arm: mvebu: turris_omnia: fix regdomain env var setting
arm: mvebu: turris_omnia: add RESET button handling
i2c: mvtwsi: fix reading status register after interrupt
arm: mvebu: turris_omnia: add GPIO support to defconfig
arm: mvebu: turris_omnia: enable defconfig options needed by vendor
Young Xiao (1):
kwbimage: fixing the issue with proper return code checking
arch/arm/mach-mvebu/Kconfig | 7 +
board/CZ.NIC/turris_mox/turris_mox.c | 4 -
board/CZ.NIC/turris_omnia/turris_omnia.c | 348 ++++++++++++++++---------------
configs/turris_omnia_defconfig | 19 +-
drivers/i2c/mvtwsi.c | 11 +
include/configs/turris_omnia.h | 32 +--
tools/kwbimage.c | 2 +-
7 files changed, 228 insertions(+), 195 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-04-26 10:58 Stefan Roese
2019-04-27 14:48 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-04-26 10:58 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell and watchdog related patches:
----------------------------------------------------------------
- Add DM based generic watchdog start and reset implementation
and remove all ad-hoc implementations (Stefan)
- Move mv_sdhci to DM (Pierre)
- Misc turris_omnia updates (Pierre)
- Change openrd targets to correctly build again (size changes
and fixes to the dts targets) and bring it back into Travis
builds (Stefan)
- Add Kirkwood db-88f6281-bp board (Chris)
----------------------------------------------------------------
Here the Travis build, without any issues:
https://travis-ci.org/stroese/u-boot/builds/524793378
Thanks,
Stefan
The following changes since commit 7d994067424776b6184872b82fcaf4c0b95528f9:
Merge tag 'pull-24apr19' of git://git.denx.de/u-boot-dm (2019-04-24 12:27:29 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to b684d4031b38b6b6a9e22676c7c6e2770e767cc7:
arm: kirkwood: openrd: Mark openrd boards as maintained again (2019-04-26 09:16:32 +0200)
----------------------------------------------------------------
Chris Packham (2):
ARM: kirkwood: add db-88f6281-bp board
ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
Michael Walle (1):
arm: kirkwood: lsxl: add note about sata in README
Pierre Bourdon (3):
arm: mvebu: turris_omnia: fix eeprom/mcu device names
mmc: mv_sdhci: add driver model support
arm: mvebu: turris_omnia: use MMC driver model
Stefan Roese (9):
arm: kirkwood: dts: Add openrd-* dtb makefile build targets
arm: kirkwood: openrd: Remove superfluous CONFIG_ENV_ADDR
arm: kirkwood: openrd: Increase U-Boot size in flash to make it fit
arm: mvebu: turris_omnia: Use thumb instructions in SPL to save space
watchdog: Implement generic watchdog_reset() version
watchdog: cadence: Remove driver specific "timeout-sec" handling
watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup
watchdog: at91sam9_wdt: Remove now superfluous wdt start and reset
arm: kirkwood: openrd: Mark openrd boards as maintained again
.travis.yml | 4 +-
arch/arm/dts/Makefile | 5 +
arch/arm/dts/kirkwood-db-88f6281-spi.dts | 48 ++++++++++
arch/arm/dts/kirkwood-db-88f6281.dts | 26 ++++++
arch/arm/dts/kirkwood-db.dtsi | 94 +++++++++++++++++++
arch/arm/mach-at91/clock.c | 45 ---------
arch/arm/mach-at91/include/mach/at91_wdt.h | 2 -
arch/arm/mach-kirkwood/Kconfig | 4 +
arch/arm/mach-mvebu/cpu.c | 2 +-
arch/arm/mach-mvebu/include/mach/cpu.h | 2 +
arch/mips/mach-mt7620/cpu.c | 36 -------
arch/powerpc/Kconfig | 2 +-
arch/powerpc/cpu/mpc8xx/Kconfig | 6 +-
board/CZ.NIC/turris_mox/turris_mox.c | 30 ------
board/CZ.NIC/turris_omnia/turris_omnia.c | 39 +-------
board/Marvell/db-88f6281-bp/.gitignore | 1 +
board/Marvell/db-88f6281-bp/Kconfig | 12 +++
board/Marvell/db-88f6281-bp/MAINTAINERS | 10 ++
board/Marvell/db-88f6281-bp/Makefile | 12 +++
board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 103 +++++++++++++++++++++
board/Marvell/db-88f6281-bp/kwbimage.cfg.in | 36 +++++++
board/Marvell/openrd/MAINTAINERS | 4 +-
board/alliedtelesis/x530/x530.c | 36 +------
board/buffalo/lsxl/README | 10 ++
.../xilinx/microblaze-generic/microblaze-generic.c | 40 --------
board/xilinx/zynq/board.c | 39 --------
board/xilinx/zynqmp/zynqmp.c | 39 --------
common/board_r.c | 4 +
common/spl/spl.c | 5 +
configs/db-88f6281-bp-nand_defconfig | 54 +++++++++++
configs/db-88f6281-bp-spi_defconfig | 56 +++++++++++
configs/gardena-smart-gateway-at91sam_defconfig | 2 -
configs/turris_omnia_defconfig | 4 +-
drivers/mmc/mv_sdhci.c | 67 +++++++++++++-
drivers/watchdog/Kconfig | 2 +-
drivers/watchdog/Makefile | 2 +-
drivers/watchdog/at91sam9_wdt.c | 8 --
drivers/watchdog/cdns_wdt.c | 15 ++-
drivers/watchdog/mpc8xx_wdt.c | 4 +-
drivers/watchdog/wdt-uclass.c | 26 ++++++
include/asm-generic/global_data.h | 4 +
include/configs/db-88f6281-bp.h | 99 ++++++++++++++++++++
include/configs/openrd.h | 3 +-
include/configs/turris_omnia.h | 5 -
include/wdt.h | 41 ++++++++
45 files changed, 743 insertions(+), 345 deletions(-)
create mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts
create mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts
create mode 100644 arch/arm/dts/kirkwood-db.dtsi
create mode 100644 board/Marvell/db-88f6281-bp/.gitignore
create mode 100644 board/Marvell/db-88f6281-bp/Kconfig
create mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS
create mode 100644 board/Marvell/db-88f6281-bp/Makefile
create mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c
create mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg.in
create mode 100644 configs/db-88f6281-bp-nand_defconfig
create mode 100644 configs/db-88f6281-bp-spi_defconfig
create mode 100644 include/configs/db-88f6281-bp.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-04-11 12:34 Stefan Roese
2019-04-11 14:49 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-04-11 12:34 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches:
----------------------------------------------------------------
- Misc dts files sync'ed with Linux version (Chris)
- Orion watchdog fix (Chris)
- kwbimage changed to also support Marvell bin_hdr binary (Chris)
- Add DM support to enable CONFIG_BLK for sata_mv (Stefan)
- Enable BLK on multiple platforms (Stefan)
- Misc minor fixes to AXP theadorable board (Stefan)
- Correct logic for DM_SCSI + unconverted drivers check (stefan)
- Add Kirkwood db-88f6281-bp board (Chris)
- Misc changes to kirkwood to enable DM_USB here (Chris)
- Change ahci_mvebu to enable usage on A38x (Baruch)
- Update the kirkwood entry in git-mailrc (Baruch)
- Misc minor improvements (turris, documentation) (Baruch)
- Enhance sata_mv to support Kirkwood as well (Michael)
- Add wdt command (Michael)
- Add Marvell integrated CPUs (MSYS) support with DB-XC3-24G4XG
board support (Chris)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 7e9d5d4167921802d0e956f803392a2437f92bf5:
test.py: Disable fsck for FAT tests for now (2019-04-11 08:41:16 +0200)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ea755051738cfc46721351935a09036500e86053:
ARM: kirkwood: remove obsolete call to icache_enable (2019-04-11 13:42:13 +0200)
----------------------------------------------------------------
Baruch Siach (6):
ARM: mvebu: define board_ahci_enable() for A38x
ata: ahci_mvebu: add support for Armada 38x
git-mailrc: update the kirkwood entry
arm: mvebu: clearfog: document eMMC installation
mvebu: drop dangling SPI flash comments and #ifdefs
arm: mvebu: turris_omnia: select Kconfig SPI_FLASH_SPANSION
Chris Packham (20):
arm: sync armada-xp dts files from Linux 5.0
watchdog: orion_wdt: support SPL usage
watchdog: orion_wdt: take timeout value in ms
arm: mvebu: x530: Enable watchdog in SPL and U-Boot
tools: kwbimage: don't adjust for image_header for Armada MSYS
ARM: kirkwood: add db-88f6281-bp board
ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE
ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP
ARM: kirkwood: switch to using mvebu mbus
ARM: kirkwood: remove kw_config_adr_windows
ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
ARM: kirkwood: enable CONFIG_DM_USB for {dream, guru, sheeva}plug
ARM: kirkwood: enable CONFIG_DM_USB for dns325
ARM: kirkwood: enable CONFIG_DM_USB for ds109
ARM: kirkwood: enable CONFIG_DM_USB for goflexhome
ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl
ARM: kirkwood: enable CONFIG_DM_USB for nas220
arm: mvebu: Add Marvell's integrated CPUs
arm: mvebu: NAND clock support for MSYS devices
arm: mvebu: Add DB-XC3-24G4XG board
Leigh Brown (1):
ARM: kirkwood: remove obsolete call to icache_enable
Michael Walle (5):
sata: sata_mv: use correct format specifier in debug()
sata: sata_mv: support kirkwood architecture
sata: sata_mv: add orion-sata compatible string
arm: kirkwood: lsxl: enable DM for SATA
cmd: add wdt command
Stefan Roese (8):
sata: sata_mv: Add DM support to enable CONFIG_BLK usage
arm: mvebu: theadorable_debug_defconfig: Enable CONFIG_BLK
arm: mvebu: db-mv784mp-gp_defconfig: Enable CONFIG_BLK
arm: mvebu: theadorable: Add test for ctrl-c in PCIe PEX switch test
Makefile: Correct logic for DM_SCSI + unconverted drivers check
arm: mvebu: ds412: Enable CONFIG_BLK
arm: mvebu: AXP: Enhance PCIe port capability configuration
arm: mvebu: Fix Kconfig dependency warnings
Makefile | 19 +-
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/armada-370-xp.dtsi | 133 ++++----
arch/arm/dts/armada-385-atl-x530-u-boot.dtsi | 4 +
arch/arm/dts/armada-xp-98dx3236.dtsi | 343 ++++++++++++++++++++
arch/arm/dts/armada-xp-98dx3336.dtsi | 39 +++
arch/arm/dts/armada-xp-98dx4251.dtsi | 54 ++++
arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi | 24 ++
arch/arm/dts/armada-xp-db-xc3-24g4xg.dts | 110 +++++++
arch/arm/dts/armada-xp-gp.dts | 167 +++++-----
arch/arm/dts/armada-xp-maxbcm.dts | 24 +-
arch/arm/dts/armada-xp-mv78230.dtsi | 55 +---
arch/arm/dts/armada-xp-mv78260.dtsi | 58 +---
arch/arm/dts/armada-xp-mv78460.dtsi | 58 +---
arch/arm/dts/armada-xp-synology-ds414.dts | 199 ++++++------
arch/arm/dts/armada-xp-theadorable.dts | 69 ++--
arch/arm/dts/armada-xp.dtsi | 214 +++++++------
arch/arm/dts/kirkwood-db-88f6281-spi.dts | 48 +++
arch/arm/dts/kirkwood-db-88f6281.dts | 26 ++
arch/arm/dts/kirkwood-db.dtsi | 94 ++++++
arch/arm/mach-kirkwood/Kconfig | 4 +
arch/arm/mach-kirkwood/cpu.c | 74 ++---
arch/arm/mach-kirkwood/include/mach/cpu.h | 13 +-
arch/arm/mach-kirkwood/include/mach/soc.h | 2 +-
arch/arm/mach-mvebu/Kconfig | 34 +-
arch/arm/mach-mvebu/Makefile | 2 +
arch/arm/mach-mvebu/cpu.c | 46 ++-
arch/arm/mach-mvebu/include/mach/config.h | 2 +-
arch/arm/mach-mvebu/include/mach/cpu.h | 3 +
arch/arm/mach-mvebu/include/mach/soc.h | 31 ++
arch/arm/mach-mvebu/mbus.c | 9 +
.../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 8 +-
board/CZ.NIC/turris_omnia/turris_omnia.c | 2 +-
board/Marvell/db-88f6281-bp/Kconfig | 12 +
board/Marvell/db-88f6281-bp/MAINTAINERS | 10 +
board/Marvell/db-88f6281-bp/Makefile | 12 +
board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 103 ++++++
board/Marvell/db-88f6281-bp/kwbimage.cfg.in | 36 +++
board/Marvell/db-xc3-24g4xg/.gitignore | 1 +
board/Marvell/db-xc3-24g4xg/MAINTAINERS | 7 +
board/Marvell/db-xc3-24g4xg/Makefile | 14 +
board/Marvell/db-xc3-24g4xg/README | 4 +
board/Marvell/db-xc3-24g4xg/binary.0 | 11 +
board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c | 68 ++++
board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in | 12 +
board/Synology/ds414/ds414.c | 4 +-
board/alliedtelesis/x530/x530.c | 48 +++
board/maxbcm/maxbcm.c | 2 +-
board/solidrun/clearfog/README | 23 ++
board/theadorable/theadorable.c | 38 ++-
cmd/Kconfig | 6 +
cmd/Makefile | 1 +
cmd/wdt.c | 174 ++++++++++
configs/db-88f6281-bp-nand_defconfig | 54 ++++
configs/db-88f6281-bp-spi_defconfig | 56 ++++
configs/db-mv784mp-gp_defconfig | 1 +
configs/db-xc3-24g4xg_defconfig | 55 ++++
configs/dns325_defconfig | 2 +
configs/dreamplug_defconfig | 2 +
configs/ds109_defconfig | 2 +
configs/ds414_defconfig | 1 +
configs/goflexhome_defconfig | 2 +
configs/guruplug_defconfig | 2 +
configs/lschlv2_defconfig | 6 +-
configs/lsxhl_defconfig | 6 +-
configs/nas220_defconfig | 2 +
configs/sheevaplug_defconfig | 1 +
configs/theadorable_debug_defconfig | 1 +
configs/turris_omnia_defconfig | 1 +
configs/x530_defconfig | 5 +
doc/git-mailrc | 4 +-
drivers/ata/Kconfig | 2 +
drivers/ata/ahci_mvebu.c | 1 +
drivers/ata/sata_mv.c | 354 ++++++++++++---------
drivers/ddr/marvell/axp/xor_regs.h | 4 +
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/orion_wdt.c | 27 +-
include/configs/clearfog.h | 2 -
include/configs/db-88f6281-bp.h | 99 ++++++
include/configs/db-88f6720.h | 2 -
include/configs/db-88f6820-amc.h | 2 -
include/configs/db-88f6820-gp.h | 6 -
include/configs/db-mv784mp-gp.h | 2 -
include/configs/db-xc3-24g4xg.h | 41 +++
include/configs/ds414.h | 2 -
include/configs/helios4.h | 2 -
include/configs/lsxl.h | 23 +-
include/configs/mvebu_armada-8k.h | 4 -
include/configs/theadorable.h | 2 -
include/configs/turris_mox.h | 4 -
include/configs/turris_omnia.h | 3 -
tools/kwbimage.c | 7 +
92 files changed, 2510 insertions(+), 842 deletions(-)
create mode 100644 arch/arm/dts/armada-xp-98dx3236.dtsi
create mode 100644 arch/arm/dts/armada-xp-98dx3336.dtsi
create mode 100644 arch/arm/dts/armada-xp-98dx4251.dtsi
create mode 100644 arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-xp-db-xc3-24g4xg.dts
create mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts
create mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts
create mode 100644 arch/arm/dts/kirkwood-db.dtsi
create mode 100644 board/Marvell/db-88f6281-bp/Kconfig
create mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS
create mode 100644 board/Marvell/db-88f6281-bp/Makefile
create mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c
create mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg.in
create mode 100644 board/Marvell/db-xc3-24g4xg/.gitignore
create mode 100644 board/Marvell/db-xc3-24g4xg/MAINTAINERS
create mode 100644 board/Marvell/db-xc3-24g4xg/Makefile
create mode 100644 board/Marvell/db-xc3-24g4xg/README
create mode 100644 board/Marvell/db-xc3-24g4xg/binary.0
create mode 100644 board/Marvell/db-xc3-24g4xg/db-xc3-24g4xg.c
create mode 100644 board/Marvell/db-xc3-24g4xg/kwbimage.cfg.in
create mode 100644 cmd/wdt.c
create mode 100644 configs/db-88f6281-bp-nand_defconfig
create mode 100644 configs/db-88f6281-bp-spi_defconfig
create mode 100644 configs/db-xc3-24g4xg_defconfig
create mode 100644 include/configs/db-88f6281-bp.h
create mode 100644 include/configs/db-xc3-24g4xg.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2019-04-11 12:34 Stefan Roese
@ 2019-04-11 14:49 ` Tom Rini
2019-04-11 14:51 ` Stefan Roese
0 siblings, 1 reply; 130+ messages in thread
From: Tom Rini @ 2019-04-11 14:49 UTC (permalink / raw)
To: u-boot
On Thu, Apr 11, 2019 at 02:34:01PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following Marvell related patches:
>
NAK. This is either racy, or there's other external output directory
problems still:
https://travis-ci.org/trini/u-boot/jobs/518755577#L1049
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190411/65765137/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2019-04-11 14:49 ` Tom Rini
@ 2019-04-11 14:51 ` Stefan Roese
2019-04-11 14:52 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-04-11 14:51 UTC (permalink / raw)
To: u-boot
Hi Tom,
On 11.04.19 16:49, Tom Rini wrote:
> On Thu, Apr 11, 2019 at 02:34:01PM +0200, Stefan Roese wrote:
>
>> Hi Tom,
>>
>> please pull the following Marvell related patches:
>>
>
> NAK. This is either racy, or there's other external output directory
> problems still:
> https://travis-ci.org/trini/u-boot/jobs/518755577#L1049
Ughh. Sorry, I thought that I worked this out with Chris and
pushed the correct version. Will try again most likely tomorrow.
Sorry for the trouble.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2019-04-11 14:51 ` Stefan Roese
@ 2019-04-11 14:52 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2019-04-11 14:52 UTC (permalink / raw)
To: u-boot
On Thu, Apr 11, 2019 at 04:51:52PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> On 11.04.19 16:49, Tom Rini wrote:
> >On Thu, Apr 11, 2019 at 02:34:01PM +0200, Stefan Roese wrote:
> >
> >>Hi Tom,
> >>
> >>please pull the following Marvell related patches:
> >>
> >
> >NAK. This is either racy, or there's other external output directory
> >problems still:
> >https://travis-ci.org/trini/u-boot/jobs/518755577#L1049
>
> Ughh. Sorry, I thought that I worked this out with Chris and
> pushed the correct version. Will try again most likely tomorrow.
>
> Sorry for the trouble.
No big deal, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190411/39f370bc/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-03-19 12:49 Stefan Roese
2019-03-20 13:46 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-03-19 12:49 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches, mostly fixes
which should go into the upcoming release:
----------------------------------------------------------------
- Enable network interface on clearfog_gt_8k (Baruch)
- Fix dreamplug boot by adding an spi0 alias to the DT (Chris)
- Fix / enhance Marvell ddr3 setup / parameters (Chris)
- Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris)
- Enable SPL_FLASH_BAR on db-88f6820-amc (Chris)
- Use correct pcie controller name in Armada-38x dts files (Chris)
- Disable d-cache on Kirkwood platforms as currently needed (Chris)
- Add a more descriptive comment to pci_mvebu.c (Stefan)
- Update Marvell maintainers entry (Stefan)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 374bf7af033aa326a9585c5ff878d206e90c0c1c:
Prepare v2019.04-rc4 (2019-03-18 21:14:02 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 599f7aa541bb5a658cbfd2af73bd9d2f6e828d43:
ARM: kirkwood: disable dcache for Kirkwood boards (2019-03-19 09:22:05 +0100)
----------------------------------------------------------------
Baruch Siach (1):
configs/clearfog_gt_8k: add network interface support
Chris Packham (7):
ARM: kirkwood: add spi0 alias for dreamplug
mv_ddr: ddr3: fix tRAS timimg parameter
mv_ddr: ddr3: only use active chip-selects when tuning ODT
ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000
ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR
ARM: mvebu: use correct name for pcie controller
ARM: kirkwood: disable dcache for Kirkwood boards
Stefan Roese (2):
pci: pci_mvebu: Add comment about missing of_n_addr_cells() call
MAINTAINERS: Update u-boot-marvell entry
MAINTAINERS | 11 +++++++----
arch/arm/dts/armada-385-amc.dts | 2 +-
arch/arm/dts/armada-385-turris-omnia.dts | 2 +-
arch/arm/dts/armada-388-clearfog.dts | 2 +-
arch/arm/dts/armada-388-gp.dts | 2 +-
arch/arm/dts/armada-38x-controlcenterdc.dts | 2 +-
arch/arm/dts/kirkwood-dreamplug.dts | 4 ++++
arch/arm/mach-kirkwood/include/mach/config.h | 6 ++++++
configs/clearfog_gt_8k_defconfig | 4 +++-
configs/db-88f6820-amc_defconfig | 2 ++
drivers/ddr/marvell/a38x/ddr3_training_db.c | 8 ++++----
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 3 ++-
drivers/pci/pci_mvebu.c | 6 ++++++
13 files changed, 39 insertions(+), 15 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-02-11 12:34 Stefan Roese
2019-02-11 22:41 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-02-11 12:34 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches, mostly board
specific changes and one platform build fix:
----------------------------------------------------------------
- Fix BUILD_TARGET for ARCH_MVEBU from Baruch
- Fix MVEBU PCIe reset issues from Baruch
- Increase DDR stability on x530 from Chris
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit dbe70c7d4e3d5c705a98d82952e05a591efd0683:
Merge branch 'master' of git://git.denx.de/u-boot-sh (2019-02-10 08:11:53 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to a6ac775bae7fad1534ffe2b20244b7e7106b12b0:
ARM: mvebu: x530: use MV_DDR_FREQ_SAR (2019-02-11 09:39:12 +0100)
----------------------------------------------------------------
Baruch Siach (4):
arm: mvebu: mcbin: dts: fix PCIe reset polarity
pcie: designware: mvebu: fix reset release polarity
arm: mvebu: cf gt-8k: dts: add PCIe slot reset support
Kconfig: fix BUILD_TARGET for ARCH_MVEBU
Chris Packham (1):
ARM: mvebu: x530: use MV_DDR_FREQ_SAR
Kconfig | 2 +-
arch/arm/dts/armada-8040-clearfog-gt-8k.dts | 8 ++++++++
arch/arm/dts/armada-8040-mcbin.dts | 2 +-
board/alliedtelesis/x530/x530.c | 2 +-
drivers/pci/pcie_dw_mvebu.c | 4 +++-
5 files changed, 14 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-02-05 13:36 Stefan Roese
2019-02-08 3:13 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-02-05 13:36 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches, mostly dealing
with the move to driver model (DM_VIDEO & DM_PCI) for the MVEBU
Armada XP / 38x platforms:
----------------------------------------------------------------
- Move Armada XP / 38x PCIe driver to DM_PCI from me
- Move Armada XP / 38x LCD driver to DM_VIDEO from me
- Add uDPU board (Armada-3720) from Vladimir
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit e5fd39c886485e3dec77f4438a6e364c2987cf5f:
Merge tag 'for-master-20190201' of git://git.denx.de/u-boot-rockchip (2019-02-02 10:11:20 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to f18220919079eeb8e79f4791e152f1db073574a8:
arm: mvebu: theadorable: Enable video / LCD support with the new DM driver (2019-02-05 14:23:27 +0100)
----------------------------------------------------------------
Stefan Roese (6):
pci: Add pci_get_devfn() to extract devfn from the fdt_pci_addr
pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20
arm: mvebu: armada-xp-theadorable.dts: Enable PCIe DT nodes
video: Armada XP: Move driver to DM_VIDEO
arm: mvebu: theadorable: Enable video / LCD support with the new DM driver
Vladimir Vid (1):
arm64: mvebu: Add basic support for uDPU board
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-3720-uDPU-u-boot.dtsi | 13 +
arch/arm/dts/armada-3720-uDPU.dts | 200 ++++++++++++
arch/arm/dts/armada-375.dtsi | 8 +-
arch/arm/dts/armada-xp-mv78230.dtsi | 17 +-
arch/arm/dts/armada-xp-mv78260.dtsi | 29 +-
arch/arm/dts/armada-xp-mv78460.dtsi | 32 +-
arch/arm/dts/armada-xp-theadorable.dts | 39 +++
arch/arm/mach-mvebu/include/mach/cpu.h | 12 -
board/Marvell/mvebu_armada-37xx/MAINTAINERS | 5 +
board/theadorable/theadorable.c | 16 -
configs/clearfog_defconfig | 1 +
configs/controlcenterdc_defconfig | 3 +
configs/db-88f6820-amc_defconfig | 1 +
configs/db-88f6820-gp_defconfig | 1 +
configs/db-mv784mp-gp_defconfig | 1 +
configs/ds414_defconfig | 1 +
configs/theadorable_debug_defconfig | 5 +-
configs/turris_omnia_defconfig | 3 +-
configs/uDPU_defconfig | 94 ++++++
configs/x530_defconfig | 3 +-
drivers/pci/Kconfig | 9 +
drivers/pci/pci-uclass.c | 28 +-
drivers/pci/pci_mvebu.c | 470 ++++++++++++++++------------
drivers/video/mvebu_lcd.c | 321 +++++++++++--------
include/configs/clearfog.h | 1 -
include/configs/controlcenterdc.h | 3 -
include/configs/db-88f6820-amc.h | 1 -
include/configs/db-88f6820-gp.h | 1 -
include/configs/db-mv784mp-gp.h | 1 -
include/configs/ds414.h | 1 -
include/configs/theadorable.h | 11 +-
include/configs/turris_omnia.h | 1 -
include/configs/x530.h | 1 -
include/pci.h | 10 +
scripts/config_whitelist.txt | 1 -
36 files changed, 930 insertions(+), 415 deletions(-)
create mode 100644 arch/arm/dts/armada-3720-uDPU-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-3720-uDPU.dts
create mode 100644 configs/uDPU_defconfig
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2019-01-21 10:52 Stefan Roese
2019-01-22 2:29 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2019-01-21 10:52 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the first Marvell patches in this merge window with the
following changes:
----------------------------------------------------------------
- Sync Armada-38x dts with Linux 4.20 from Chris
- Misc changes and enhancements to Turris Mox (v4) from Marek
- Reserve PSCI area for Armada 8k from Heinrich
- New Allied Telesis x530 board (Armada-385) from Chris
- Misc minor changes (defconfig etc)
----------------------------------------------------------------
Thanks,
Stefan
The following changes since commit 2acc24fc28ef782f4baef1aa0193d520ee9610b9:
Kconfig: Migrate BOUNCE_BUFFER (2019-01-19 09:49:26 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 0e31666dfa043ab71fb1fbbba4feacfe8af3e06b:
ARM: mvebu: add support for Allied Telesis x530 (2019-01-21 11:39:50 +0100)
----------------------------------------------------------------
Baruch Siach (1):
board: mvebu: drop unused ETH_PHY macro definitions
Chris Packham (2):
ARM: mvebu: sync Armada-38x dts with Linux 4.20
ARM: mvebu: add support for Allied Telesis x530
Heinrich Schuchardt (2):
arm64: dts: marvell: armada-ap806: reserve PSCI area
arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
Marek Behún (10):
arm: mvebu: turris_mox: Cosmetic restructurization
arm: mvebu: turris_mox: Change SERDES map depending on module topology
arm: mvebu: turris_mox: Check and configure modules
arm: mvebu: dts: Fix Turris Mox device tree
arm: mvebu: turris_mox: Update defconfig
watchdog: armada_37xx: Fix compliance with kernel's driver
MAINTAINERS: Add entry for CZ.NIC's Turris project
arm: mvebu: turris_mox: Read info (and ethaddrs) from OTP
arm: mvebu: turris_mox: Support 1 GB version of Turris Mox
arm: mvebu: configs: turris_mox: Add 64 MiB of boot memory
MAINTAINERS | 8 +
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/armada-3720-turris-mox.dts | 23 +-
arch/arm/dts/armada-380.dtsi | 44 +--
arch/arm/dts/armada-385-atl-x530-u-boot.dtsi | 13 +
arch/arm/dts/armada-385-atl-x530.dts | 50 +++
arch/arm/dts/armada-385-atl-x530.dtsi | 266 +++++++++++++++
arch/arm/dts/armada-385-atl-x530DP.dts | 51 +++
arch/arm/dts/armada-385-atl-x530DP.dtsi | 149 +++++++++
arch/arm/dts/armada-385.dtsi | 63 +---
arch/arm/dts/armada-388-clearfog.dts | 25 +-
arch/arm/dts/armada-388.dtsi | 43 +--
arch/arm/dts/armada-38x-controlcenterdc.dts | 68 ++--
arch/arm/dts/armada-38x.dtsi | 283 +++++++++-------
arch/arm/dts/armada-ap806.dtsi | 11 +
arch/arm/mach-mvebu/Kconfig | 7 +
arch/arm/mach-mvebu/arm64-common.c | 4 +-
board/CZ.NIC/turris_mox/Makefile | 2 +-
board/CZ.NIC/turris_mox/mox_sp.c | 136 ++++++++
board/CZ.NIC/turris_mox/mox_sp.h | 15 +
board/CZ.NIC/turris_mox/turris_mox.c | 462 +++++++++++++++++++++++---
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 4 -
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 4 -
board/alliedtelesis/common/gpio_hog.c | 36 ++
board/alliedtelesis/common/gpio_hog.h | 13 +
board/alliedtelesis/x530/MAINTAINERS | 12 +
board/alliedtelesis/x530/Makefile | 9 +
board/alliedtelesis/x530/kwbimage.cfg | 12 +
board/alliedtelesis/x530/x530.c | 161 +++++++++
board/gdsys/a38x/controlcenterdc.c | 4 -
board/kobol/helios4/helios4.c | 4 -
board/solidrun/clearfog/clearfog.c | 4 -
configs/clearfog_gt_8k_defconfig | 2 +
configs/mvebu_db_armada8k_defconfig | 2 +
configs/mvebu_mcbin-88f8040_defconfig | 2 +
configs/turris_mox_defconfig | 6 +
configs/x530_defconfig | 71 ++++
drivers/watchdog/armada-37xx-wdt.c | 109 +++---
include/configs/turris_mox.h | 2 +
include/configs/x530.h | 134 ++++++++
40 files changed, 1918 insertions(+), 400 deletions(-)
create mode 100644 arch/arm/dts/armada-385-atl-x530-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-385-atl-x530.dts
create mode 100644 arch/arm/dts/armada-385-atl-x530.dtsi
create mode 100644 arch/arm/dts/armada-385-atl-x530DP.dts
create mode 100644 arch/arm/dts/armada-385-atl-x530DP.dtsi
create mode 100644 board/CZ.NIC/turris_mox/mox_sp.c
create mode 100644 board/CZ.NIC/turris_mox/mox_sp.h
create mode 100644 board/alliedtelesis/common/gpio_hog.c
create mode 100644 board/alliedtelesis/common/gpio_hog.h
create mode 100644 board/alliedtelesis/x530/MAINTAINERS
create mode 100644 board/alliedtelesis/x530/Makefile
create mode 100644 board/alliedtelesis/x530/kwbimage.cfg
create mode 100644 board/alliedtelesis/x530/x530.c
create mode 100644 configs/x530_defconfig
create mode 100644 include/configs/x530.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-12-21 15:31 Stefan Roese
2018-12-23 17:31 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-12-21 15:31 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following minor, local changes and fixes:
----------------------------------------------------------------
- Fix breakage in helios4: Change U-Boot offset on SPI Flash
- Enable CONFIG_BLK for db-88f6820-amc
----------------------------------------------------------------
I do not plan any other updates until the release right now.
Thanks,
Stefan
The following changes since commit 1f2e948d6d53f77a2ddb2dde3531b0d5bc2815ad:
Prepare v2019.01-rc2 (2018-12-17 20:25:24 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 7a147220c6459aeb7c6b6f7afe4330dcce077c9b:
arm: mvebu: configs: helios4: Change U-Boot offset on SPI Flash (2018-12-21 08:59:19 +0100)
----------------------------------------------------------------
Aditya Prayoga (1):
arm: mvebu: configs: helios4: Change U-Boot offset on SPI Flash
Chris Packham (2):
ARM: mvebu: define CONFIG_BLK for db-88f6820-amc
ARM: mvebu: remove out of date comment
arch/arm/mach-mvebu/cpu.c | 6 ++----
configs/db-88f6820-amc_defconfig | 3 +++
include/configs/helios4.h | 2 +-
3 files changed, 6 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-11-30 14:45 Stefan Roese
2018-11-30 22:09 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-11-30 14:45 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the next batch of Marvell related patches. Here a short
summary:
- Some Kirkwood boards converted to DM_SPI by Chris
- New Armada-385 SoC revision printed by Chris
- Ethernet enable on mcbin by Baruch
- Support 2 DRAM banks on Armada-8k boards by Baruch
Thanks,
Stefan
The following changes since commit 93e72ac472b537bb4b0c6a97a7e6aab2b37860c6:
Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic (2018-11-29 15:16:58 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to d997ad034b6a2e840fefb8224bfd85391cafd71d:
ARM: mvebu: add revision id for Armada-385 B0 (2018-11-30 10:58:10 +0100)
----------------------------------------------------------------
Baruch Siach (3):
arm: mvebu: configs: armada8k: use 2 DRAM banks
arm: mvebu: mcbin: dts: enable 1G network interface
arm: mvebu: mcbin: configs: enable network driver
Chris Packham (4):
arm: kirkwood: configs: Convert Allied Telesis boards to DM_SPI
arm: kirkwood: configs: ds109: Convert to DM_SPI
arm: kirkwood: configs: dreamplug: Convert to DM_SPI
ARM: mvebu: add revision id for Armada-385 B0
arch/arm/dts/armada-8040-mcbin.dts | 16 ++++++++++++++++
arch/arm/mach-mvebu/cpu.c | 3 +++
arch/arm/mach-mvebu/include/mach/soc.h | 1 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 1 +
configs/SBx81LIFKW_defconfig | 2 ++
configs/SBx81LIFXCAT_defconfig | 2 ++
configs/clearfog_gt_8k_defconfig | 2 +-
configs/dreamplug_defconfig | 2 ++
configs/ds109_defconfig | 2 ++
configs/mvebu_db_armada8k_defconfig | 2 +-
configs/mvebu_mcbin-88f8040_defconfig | 8 ++++----
include/configs/dreamplug.h | 1 -
include/configs/ds109.h | 1 -
13 files changed, 35 insertions(+), 8 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-11-30 14:45 Stefan Roese
@ 2018-11-30 22:09 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-11-30 22:09 UTC (permalink / raw)
To: u-boot
On Fri, Nov 30, 2018 at 03:45:29PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the next batch of Marvell related patches. Here a short
> summary:
>
> - Some Kirkwood boards converted to DM_SPI by Chris
> - New Armada-385 SoC revision printed by Chris
> - Ethernet enable on mcbin by Baruch
> - Support 2 DRAM banks on Armada-8k boards by Baruch
>
> Thanks,
> Stefan
>
>
> The following changes since commit 93e72ac472b537bb4b0c6a97a7e6aab2b37860c6:
>
> Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic (2018-11-29 15:16:58 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to d997ad034b6a2e840fefb8224bfd85391cafd71d:
>
> ARM: mvebu: add revision id for Armada-385 B0 (2018-11-30 10:58:10 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181130/504a7cbe/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-11-20 12:15 Stefan Roese
2018-11-20 21:48 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-11-20 12:15 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the first batch of Marvell patches with:
- Clearfog GT-8K support added by Baruch / Raheeb
- const and sizes cleanup (also in MIPS) from Baruch
- Minor cleanup to db-88f6820 from Chris
Thanks,
Stefan
The following changes since commit d73d81fd85e4a030ade42c4b2d13466d45090aa3:
Merge tag 'mips-pull-2018-11-18' of git://git.denx.de/u-boot-mips (2018-11-18 15:47:16 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 5bbf36af7ff6f4ff77d903320e95e5628c68884d:
ARM: mvebu: dts: add Clearfog GT-8K (2018-11-20 13:08:44 +0100)
----------------------------------------------------------------
Baruch Siach (5):
linux/const.h: import from kernel
Use _AC and UL macros from linux/const.h
MIPS: drop asm/const.h
linux/sizes.h: sync from kernel
arm64: mvebu: a8k: autodetect RAM size
Chris Packham (1):
ARM: mvebu: db-88f6820: remove redundant comment
Rabeeh Khoury (1):
ARM: mvebu: dts: add Clearfog GT-8K
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-8040-clearfog-gt-8k.dts | 315 +++++++++++++++++++++++
arch/arm/include/asm/armv8/mmu.h | 2 +
arch/arm/mach-mvebu/arm64-common.c | 50 +++-
arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 3 +-
arch/mips/include/asm/mach-generic/spaces.h | 2 +-
arch/riscv/include/asm/csr.h | 2 +
configs/clearfog_gt_8k_defconfig | 75 ++++++
include/common.h | 9 -
include/configs/db-88f6820-amc.h | 5 -
include/configs/db-88f6820-gp.h | 5 -
{arch/mips/include/asm => include/linux}/const.h | 23 +-
include/linux/sizes.h | 4 +
13 files changed, 465 insertions(+), 31 deletions(-)
create mode 100644 arch/arm/dts/armada-8040-clearfog-gt-8k.dts
create mode 100644 configs/clearfog_gt_8k_defconfig
rename {arch/mips/include/asm => include/linux}/const.h (52%)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-11-20 12:15 Stefan Roese
@ 2018-11-20 21:48 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-11-20 21:48 UTC (permalink / raw)
To: u-boot
On Tue, Nov 20, 2018 at 01:15:37PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the first batch of Marvell patches with:
>
> - Clearfog GT-8K support added by Baruch / Raheeb
> - const and sizes cleanup (also in MIPS) from Baruch
> - Minor cleanup to db-88f6820 from Chris
>
> Thanks,
> Stefan
>
>
> The following changes since commit d73d81fd85e4a030ade42c4b2d13466d45090aa3:
>
> Merge tag 'mips-pull-2018-11-18' of git://git.denx.de/u-boot-mips (2018-11-18 15:47:16 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 5bbf36af7ff6f4ff77d903320e95e5628c68884d:
>
> ARM: mvebu: dts: add Clearfog GT-8K (2018-11-20 13:08:44 +0100)
>
After updating board/solidrun/clearfog/MAINTAINERS to list
configs/clearfog_gt_8k_defconfig as well, applied to u-boot/master,
thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181120/0561949e/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-09-19 15:12 Stefan Roese
2018-09-20 13:24 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-09-19 15:12 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the Marvell U-Boot patches with these changes:
- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
to support the turris platform
- Many fixes and enhancements to the pxa3xx NAND driver
- Fixes for the UART boot mode in kwboot
- Misc minor changes to other 32bit and 64bit boards
Thanks,
Stefan
The following changes since commit b57f1895b669e3fbdca486e7c40dfea00f22bb93:
Merge git://git.denx.de/u-boot-x86 (2018-09-17 08:04:25 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to e32ac37119394f2d3c579b2cdd549bed59fb583f:
arm: mvebu: clearfog: enable eMMC boot partitions support (2018-09-19 14:00:06 +0200)
----------------------------------------------------------------
Baruch Siach (4):
doc/git-mailrc: add Stefan Roese to the kirkwood alias
arm64: mvebu: armada-8k: support environment in SD/eMMC
dts: mvebu: mcbin: drop redundant SD slot node
arm: mvebu: clearfog: enable eMMC boot partitions support
Boris Brezillon (1):
mtd: nand: pxa3xx: Fix READOOB implementation
Chris Packham (2):
Revert "arm: mvebu: fix boot from UART when in fallback mode"
ARM: mach-mvebu: handle fall-back to UART boot
David Sniatkiwicz (1):
fix: nand: pxa3xx: Add WA for eliminating flash ready timeout
Evgeni Dobrev (1):
Kirkwood: NAS220: remove bootdelay from CONFIG_EXTRA_ENV_SETTINGS
Jon Nettleton (1):
tools: kwboot: Make kwboot more robust on a38x
Konstantin Porotchkin (7):
mtd: nand: pxa3xx: add support for Toshiba flash
fix: nand: Replace hardcoded page chunk size with calculated one
nand: pxa3xx: cosmetic: add comments to the timing layout structures
nand: pxa3xx: Add support for 8KB page 4 and 8 bit ECC NAND
fix: env: Fix the SPI flash device setup for DM mode
fix: mvebu: Add SPI parameters for environment setup
fix: cmd: mvebu: Exclude mvebu commands from SPL builds
Marek Behún (6):
phy: marvell: Support changing SERDES map in board file
clk: armada-37xx-periph: Support changing clock parent and rate
board: turris_mox: Fix watchdog macro name
board: turris_mox: Enable PCI in defconfig
arch/arm/dts: Update Turris Mox device tree
board: turris_mox: Fixup U-Boot's device tree if PCIe connected
Ofer Heifetz (10):
mtd: nand: pxa3xx_nand: Increase initial buffer size
mtd: nand: pxa3xx_nand: use nand_to_mtd()
mtd: nand: pxa3xx_nand: sync pxa3xx_nand_set_sdr_timing()
mtd: nand: pxa3xx_nand: fix early spurious interrupt
mtd: nand: pxa3xx-nand: fix random command timeouts
nand: pxa3xx: Increase READ_ID buffer and make the size static
mtd: pxa3xx_nand: Increase the initial chunk size
mtd: pxa3xx_nand: Fix initial controller configuration
mtd: pxa3xx_nand: Simplify pxa3xx_nand_scan
mtd: nand: pxa3xx_nand: add support for partial chunks
Rabeeh Khoury (1):
phy: marvell: add SATA comphy RX/TX polarity invert support
Victor Axelrod (1):
mtd: nand: pxa3xx: add support for 2KB 8-bit flash
MAINTAINERS | 3 +-
arch/arm/dts/armada-3720-turris-mox.dts | 17 +-
arch/arm/dts/armada-8040-mcbin.dts | 8 -
arch/arm/mach-mvebu/armada8k/cpu.c | 24 ++
arch/arm/mach-mvebu/include/mach/soc.h | 8 +-
arch/arm/mach-mvebu/spl.c | 15 +-
board/CZ.NIC/turris_mox/turris_mox.c | 88 ++++-
cmd/Makefile | 3 +-
configs/turris_mox_defconfig | 6 +
doc/git-mailrc | 2 +-
drivers/clk/mvebu/armada-37xx-periph.c | 130 ++++++-
drivers/mtd/nand/pxa3xx_nand.c | 447 ++++++++++++++++--------
drivers/phy/marvell/comphy_a3700.h | 2 +-
drivers/phy/marvell/comphy_core.c | 12 +-
drivers/phy/marvell/{comphy.h => comphy_core.h} | 16 +-
drivers/phy/marvell/comphy_cp110.c | 21 +-
drivers/phy/marvell/comphy_hpipe.h | 6 +
drivers/phy/marvell/comphy_mux.c | 2 +-
env/sf.c | 3 +-
include/configs/clearfog.h | 4 +
include/configs/db-88f6820-gp.h | 6 +
include/configs/mvebu_armada-8k.h | 3 +
include/configs/nas220.h | 1 -
include/mvebu/comphy.h | 22 ++
tools/kwboot.c | 14 +-
25 files changed, 664 insertions(+), 199 deletions(-)
rename drivers/phy/marvell/{comphy.h => comphy_core.h} (96%)
create mode 100644 include/mvebu/comphy.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-09-19 15:12 Stefan Roese
@ 2018-09-20 13:24 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-09-20 13:24 UTC (permalink / raw)
To: u-boot
On Wed, Sep 19, 2018 at 05:12:03PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the Marvell U-Boot patches with these changes:
>
> - Multiples updates to the turris boards / platform
> - Changes / enhancements to the Marvell PHY drivers, mainly
> to support the turris platform
> - Many fixes and enhancements to the pxa3xx NAND driver
> - Fixes for the UART boot mode in kwboot
> - Misc minor changes to other 32bit and 64bit boards
>
> Thanks,
> Stefan
>
>
> The following changes since commit b57f1895b669e3fbdca486e7c40dfea00f22bb93:
>
> Merge git://git.denx.de/u-boot-x86 (2018-09-17 08:04:25 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to e32ac37119394f2d3c579b2cdd549bed59fb583f:
>
> arm: mvebu: clearfog: enable eMMC boot partitions support (2018-09-19 14:00:06 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180920/e65d2929/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-08-07 13:10 Stefan Roese
2018-08-08 1:35 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-08-07 13:10 UTC (permalink / raw)
To: u-boot
Hi Tom,
I'm a bit late because of a longer week vacation from which I
just returned. Here my patch queue for the Marvell MVEBU SoC
family.
Thanks,
Stefan
The following changes since commit bb694d4e898b1368ba96e01481dc0a79c491e77c:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2018-08-04 19:41:43 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 79a0188679df53862e06fd7c8fecb7f3d7d44502:
arm64: a37xx: add CONFIG_MTD_DEVICE and CONFIG_MTD_PARTITIONS (2018-08-07 10:53:52 +0200)
----------------------------------------------------------------
Baruch Siach (9):
mvebu: turris_omnia: use u-boot-spl-dtb.bin
mvebu: a38x: drop duplicate platform id symbols
mvebu: consolidate SPL boot device config symbols
mvebu: select boot device at SoC level
mvebu: support UART boot image
mvebu: clearfog: use kconfig symbols to select boot device
arm: mvebu: solidrun-microsom: update SPI flash compatible
arm: mvebu: clearfog: use the microsom .dtsi
arm: mvebu: helios4: remove duplicate sdhci pins node
Chris Packham (4):
configs: kirkwood: ds109: switch to DM_I2C
configs: move RTC_MV config from mv-plug-common.h to boards
configs: kirkwood: Move RTC_MV to DM and Kconfig
ARM: kirkwood: add SBx81LIFXCAT board
Jon Nettleton (2):
arm: mvebu: Better align Clearfog dts file with Linux kernel
arm: mvebu: clearfog: add u-boot, dm-spl tag for spi
Vladimir Vid (1):
arm64: a37xx: add CONFIG_MTD_DEVICE and CONFIG_MTD_PARTITIONS
Willy Tarreau (2):
tools: kwboot: unbreak terminal-only mode
tools: kwboot: properly quit when read() returns 0
arch/arm/Kconfig | 1 -
arch/arm/dts/armada-388-clearfog-u-boot.dtsi | 9 +
arch/arm/dts/armada-388-clearfog.dts | 449 +++++++--------------
arch/arm/dts/armada-388-helios4.dts | 8 +-
arch/arm/dts/armada-38x-solidrun-microsom.dtsi | 2 +-
arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts | 145 +++++++
arch/arm/mach-kirkwood/Kconfig | 4 +
.../gdsys/a38x => arch/arm/mach-mvebu}/.gitignore | 0
arch/arm/mach-mvebu/Kconfig | 17 +-
arch/arm/mach-mvebu/Makefile | 33 ++
arch/arm/mach-mvebu/include/mach/config.h | 4 +-
.../a38x => arch/arm/mach-mvebu}/kwbimage.cfg.in | 0
board/CZ.NIC/turris_omnia/kwbimage.cfg | 12 -
board/Marvell/db-88f6720/kwbimage.cfg | 12 -
board/Marvell/db-88f6820-amc/kwbimage.cfg | 12 -
board/Marvell/db-88f6820-gp/kwbimage.cfg | 12 -
board/Marvell/db-mv784mp-gp/kwbimage.cfg | 12 -
board/Synology/ds414/kwbimage.cfg | 12 -
board/alliedtelesis/SBx81LIFXCAT/Kconfig | 12 +
board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS | 7 +
board/alliedtelesis/SBx81LIFXCAT/Makefile | 7 +
board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg | 49 +++
board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c | 134 ++++++
board/gdsys/a38x/Kconfig | 36 --
board/gdsys/a38x/Makefile | 31 --
board/kobol/helios4/kwbimage.cfg | 13 -
board/maxbcm/kwbimage.cfg | 12 -
board/solidrun/clearfog/kwbimage.cfg | 12 -
board/theadorable/kwbimage.cfg | 12 -
configs/SBx81LIFKW_defconfig | 2 +
configs/SBx81LIFXCAT_defconfig | 44 ++
configs/clearfog_defconfig | 2 +-
configs/dns325_defconfig | 5 +-
configs/dreamplug_defconfig | 5 +-
configs/ds109_defconfig | 7 +-
configs/goflexhome_defconfig | 5 +-
configs/guruplug_defconfig | 5 +-
configs/helios4_defconfig | 1 +
configs/nas220_defconfig | 5 +-
configs/sheevaplug_defconfig | 5 +-
include/configs/SBx81LIFKW.h | 5 -
include/configs/SBx81LIFXCAT.h | 114 ++++++
include/configs/clearfog.h | 16 +-
include/configs/dns325.h | 7 -
include/configs/goflexhome.h | 7 -
include/configs/mv-plug-common.h | 7 -
include/configs/mvebu_armada-37xx.h | 2 +
include/configs/nas220.h | 7 -
include/configs/turris_omnia.h | 4 +-
tools/kwboot.c | 6 +-
50 files changed, 772 insertions(+), 558 deletions(-)
create mode 100644 arch/arm/dts/armada-388-clearfog-u-boot.dtsi
create mode 100644 arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts
rename {board/gdsys/a38x => arch/arm/mach-mvebu}/.gitignore (100%)
rename {board/gdsys/a38x => arch/arm/mach-mvebu}/kwbimage.cfg.in (100%)
delete mode 100644 board/CZ.NIC/turris_omnia/kwbimage.cfg
delete mode 100644 board/Marvell/db-88f6720/kwbimage.cfg
delete mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg
delete mode 100644 board/Marvell/db-88f6820-gp/kwbimage.cfg
delete mode 100644 board/Marvell/db-mv784mp-gp/kwbimage.cfg
delete mode 100644 board/Synology/ds414/kwbimage.cfg
create mode 100644 board/alliedtelesis/SBx81LIFXCAT/Kconfig
create mode 100644 board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS
create mode 100644 board/alliedtelesis/SBx81LIFXCAT/Makefile
create mode 100644 board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg
create mode 100644 board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c
delete mode 100644 board/gdsys/a38x/Kconfig
delete mode 100644 board/kobol/helios4/kwbimage.cfg
delete mode 100644 board/maxbcm/kwbimage.cfg
delete mode 100644 board/solidrun/clearfog/kwbimage.cfg
delete mode 100644 board/theadorable/kwbimage.cfg
create mode 100644 configs/SBx81LIFXCAT_defconfig
create mode 100644 include/configs/SBx81LIFXCAT.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-08-07 13:10 Stefan Roese
@ 2018-08-08 1:35 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-08-08 1:35 UTC (permalink / raw)
To: u-boot
On Tue, Aug 07, 2018 at 03:10:27PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> I'm a bit late because of a longer week vacation from which I
> just returned. Here my patch queue for the Marvell MVEBU SoC
> family.
>
> Thanks,
> Stefan
>
>
> The following changes since commit bb694d4e898b1368ba96e01481dc0a79c491e77c:
>
> Merge branch 'master' of git://git.denx.de/u-boot-spi (2018-08-04 19:41:43 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 79a0188679df53862e06fd7c8fecb7f3d7d44502:
>
> arm64: a37xx: add CONFIG_MTD_DEVICE and CONFIG_MTD_PARTITIONS (2018-08-07 10:53:52 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180807/abe2e490/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-06-05 9:33 Stefan Roese
2018-06-05 14:14 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-06-05 9:33 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the last batch of Marvell patches for this release
(bug fixes might still be coming).
I've run checkpatch as requested and only noticed warnings that
I feel should be ignored (>80 chars etc).
Thanks,
Stefan
The following changes since commit ee1855dc52fc366f33e21182103323c236cb3346:
Prepare v2018.07-rc1 (2018-06-04 18:08:45 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to d4899b0f5ddf39de47bd952ca8484a14f03d00fe:
ARM: kirkwood: Enforce size limit for guruplug (2018-06-05 07:29:09 +0200)
----------------------------------------------------------------
Chris Packham (5):
ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
ARM: add SBx81LIFKW board
ARM: kirkwood: SBx81LIFKW: Enable network hardware
ARM: kirkwood: Enforce size limit for sheevaplug
ARM: kirkwood: Enforce size limit for guruplug
Jon Nettleton (2):
arm: mvebu: enable sata support for clearfog
arm: mvebu: switch clearfog to use device-tree i2c and gpio
Michael Walle (2):
enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board
arm: kirkwood: lsxl: Add SPI driver model support
Rabeeh Khoury (1):
mvebu: a38x: Force receiver detected on PCIe lanes
Vagrant Cascadian (1):
Enable thumb build to reduce build size of u-boot.kwb.
arch/arm/dts/armada-388-clearfog.dts | 2 +
arch/arm/dts/kirkwood-atl-sbx81lifkw.dts | 133 ++++++++++++++
arch/arm/dts/kirkwood-lsxl.dtsi | 4 +
arch/arm/mach-kirkwood/Kconfig | 4 +
arch/arm/mach-kirkwood/include/mach/config.h | 3 +-
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 1 +
board/alliedtelesis/SBx81LIFKW/Kconfig | 12 ++
board/alliedtelesis/SBx81LIFKW/MAINTAINERS | 7 +
board/alliedtelesis/SBx81LIFKW/Makefile | 7 +
board/alliedtelesis/SBx81LIFKW/kwbimage.cfg | 47 +++++
board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 197 +++++++++++++++++++++
board/solidrun/clearfog/clearfog.c | 22 ---
configs/SBx81LIFKW_defconfig | 39 ++++
configs/clearfog_defconfig | 8 +
configs/lschlv2_defconfig | 18 +-
configs/lsxhl_defconfig | 3 +
configs/sheevaplug_defconfig | 1 +
include/configs/SBx81LIFKW.h | 119 +++++++++++++
include/configs/clearfog.h | 16 +-
include/configs/guruplug.h | 5 +
include/configs/sheevaplug.h | 5 +
22 files changed, 612 insertions(+), 43 deletions(-)
create mode 100644 arch/arm/dts/kirkwood-atl-sbx81lifkw.dts
create mode 100644 board/alliedtelesis/SBx81LIFKW/Kconfig
create mode 100644 board/alliedtelesis/SBx81LIFKW/MAINTAINERS
create mode 100644 board/alliedtelesis/SBx81LIFKW/Makefile
create mode 100644 board/alliedtelesis/SBx81LIFKW/kwbimage.cfg
create mode 100644 board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
create mode 100644 configs/SBx81LIFKW_defconfig
create mode 100644 include/configs/SBx81LIFKW.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-06-05 9:33 Stefan Roese
@ 2018-06-05 14:14 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-06-05 14:14 UTC (permalink / raw)
To: u-boot
On Tue, Jun 05, 2018 at 11:33:03AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the last batch of Marvell patches for this release
> (bug fixes might still be coming).
>
> I've run checkpatch as requested and only noticed warnings that
> I feel should be ignored (>80 chars etc).
>
> Thanks,
> Stefan
>
>
> The following changes since commit ee1855dc52fc366f33e21182103323c236cb3346:
>
> Prepare v2018.07-rc1 (2018-06-04 18:08:45 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to d4899b0f5ddf39de47bd952ca8484a14f03d00fe:
>
> ARM: kirkwood: Enforce size limit for guruplug (2018-06-05 07:29:09 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180605/c11c7f30/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-05-16 12:05 Stefan Roese
2018-05-16 15:37 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-05-16 12:05 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the Kirkwood DT patches from Chris.
Thanks,
Stefan
The following changes since commit 0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15 09:08:00 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53 +0200)
----------------------------------------------------------------
Chris Packham (11):
ARM: add devicetree files for kirkwood SoC
ARM: kirkwood: Add device-tree for dns325
ARM: kirkwood: Add device-tree for dockstar
ARM: kirkwood: Add device-tree for goflexhome
ARM: kirkwood: Add device-tree for guruplug
ARM: kirkwood: Add device-tree for ib62x0
ARM: kirkwood: Add device-tree for iconnect
ARM: kirkwood: Add device-tree for nas220
ARM: kirkwood: Add device-tree for openrd
ARM: kirkwood: Add device-tree for pogo_e02
ARM: kirkwood: Add device-tree for sheevaplug
arch/arm/dts/kirkwood-6192.dtsi | 88 ++++++
arch/arm/dts/kirkwood-6281.dtsi | 90 ++++++
arch/arm/dts/kirkwood-98dx4122.dtsi | 53 ++++
arch/arm/dts/kirkwood-blackarmor-nas220.dts | 172 +++++++++++
arch/arm/dts/kirkwood-dns325.dts | 63 ++++
arch/arm/dts/kirkwood-dnskw.dtsi | 235 +++++++++++++++
arch/arm/dts/kirkwood-dockstar.dts | 110 +++++++
arch/arm/dts/kirkwood-goflexnet.dts | 190 ++++++++++++
arch/arm/dts/kirkwood-guruplug-server-plus.dts | 133 +++++++++
arch/arm/dts/kirkwood-ib62x0.dts | 146 +++++++++
arch/arm/dts/kirkwood-iconnect.dts | 195 ++++++++++++
arch/arm/dts/kirkwood-openrd-base.dts | 39 +++
arch/arm/dts/kirkwood-openrd-client.dts | 73 +++++
arch/arm/dts/kirkwood-openrd-ultimate.dts | 55 ++++
arch/arm/dts/kirkwood-openrd.dtsi | 122 ++++++++
arch/arm/dts/kirkwood-pogo_e02.dts | 132 +++++++++
arch/arm/dts/kirkwood-sheevaplug-common.dtsi | 104 +++++++
arch/arm/dts/kirkwood-sheevaplug.dts | 42 +++
arch/arm/dts/kirkwood.dtsi | 393 +++++++++++++++++++++++++
configs/dns325_defconfig | 3 +-
configs/dockstar_defconfig | 3 +-
configs/goflexhome_defconfig | 3 +-
configs/guruplug_defconfig | 3 +-
configs/ib62x0_defconfig | 3 +-
configs/iconnect_defconfig | 3 +-
configs/nas220_defconfig | 3 +-
configs/openrd_base_defconfig | 3 +-
configs/openrd_client_defconfig | 3 +-
configs/openrd_ultimate_defconfig | 3 +-
configs/pogo_e02_defconfig | 3 +-
configs/sheevaplug_defconfig | 3 +-
31 files changed, 2459 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/dts/kirkwood-6192.dtsi
create mode 100644 arch/arm/dts/kirkwood-6281.dtsi
create mode 100644 arch/arm/dts/kirkwood-98dx4122.dtsi
create mode 100644 arch/arm/dts/kirkwood-blackarmor-nas220.dts
create mode 100644 arch/arm/dts/kirkwood-dns325.dts
create mode 100644 arch/arm/dts/kirkwood-dnskw.dtsi
create mode 100644 arch/arm/dts/kirkwood-dockstar.dts
create mode 100644 arch/arm/dts/kirkwood-goflexnet.dts
create mode 100644 arch/arm/dts/kirkwood-guruplug-server-plus.dts
create mode 100644 arch/arm/dts/kirkwood-ib62x0.dts
create mode 100644 arch/arm/dts/kirkwood-iconnect.dts
create mode 100644 arch/arm/dts/kirkwood-openrd-base.dts
create mode 100644 arch/arm/dts/kirkwood-openrd-client.dts
create mode 100644 arch/arm/dts/kirkwood-openrd-ultimate.dts
create mode 100644 arch/arm/dts/kirkwood-openrd.dtsi
create mode 100644 arch/arm/dts/kirkwood-pogo_e02.dts
create mode 100644 arch/arm/dts/kirkwood-sheevaplug-common.dtsi
create mode 100644 arch/arm/dts/kirkwood-sheevaplug.dts
create mode 100644 arch/arm/dts/kirkwood.dtsi
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-16 12:05 Stefan Roese
@ 2018-05-16 15:37 ` Tom Rini
2018-05-17 8:36 ` Chris Packham
0 siblings, 1 reply; 130+ messages in thread
From: Tom Rini @ 2018-05-16 15:37 UTC (permalink / raw)
To: u-boot
On Wed, May 16, 2018 at 02:05:03PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the Kirkwood DT patches from Chris.
>
> Thanks,
> Stefan
>
> The following changes since commit 0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
>
> ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15 09:08:00 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
>
> ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53 +0200)
>
NAK. With gcc-7.3
(https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/)
I get:
arm: + openrd_base openrd_ultimate openrd_client
+(openrd_base,openrd_ultimate,openrd_client) u-boot-nodtb.bin exceeds file size limit:
+(openrd_base,openrd_ultimate,openrd_client) limit: 393216 bytes
+(openrd_base) actual: 395632 bytes
+(openrd_base) excess: 2416 bytes
+(openrd_base,openrd_ultimate,openrd_client) make[1]: *** [Makefile:1014: u-boot-nodtb.bin] Error 1
+(openrd_ultimate) actual: 395664 bytes
+(openrd_ultimate) excess: 2448 bytes
+(openrd_client) actual: 395680 bytes
+(openrd_client) excess: 2464 bytes
And I will be pushing those changes to finally switch travis over to
gcc-7.3 soon (I had thought I had posted them a long while back so that
I could have pulled them in right after v2018.05, but I forgot, so here
we are now..).
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180516/e442c85b/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-16 15:37 ` Tom Rini
@ 2018-05-17 8:36 ` Chris Packham
2018-05-17 8:45 ` Chris Packham
0 siblings, 1 reply; 130+ messages in thread
From: Chris Packham @ 2018-05-17 8:36 UTC (permalink / raw)
To: u-boot
On Thu, May 17, 2018 at 3:37 AM Tom Rini <trini@konsulko.com> wrote:
> On Wed, May 16, 2018 at 02:05:03PM +0200, Stefan Roese wrote:
> > Hi Tom,
> >
> > please pull the Kirkwood DT patches from Chris.
> >
> > Thanks,
> > Stefan
> >
> > The following changes since commit
0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
> >
> > ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15
09:08:00 -0400)
> >
> > are available in the Git repository at:
> >
> > git://www.denx.de/git/u-boot-marvell.git
> >
> > for you to fetch changes up to a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
> >
> > ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53
+0200)
> >
> NAK. With gcc-7.3
> (
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/)
> I get:
> arm: + openrd_base openrd_ultimate openrd_client
> +(openrd_base,openrd_ultimate,openrd_client) u-boot-nodtb.bin exceeds
file size limit:
> +(openrd_base,openrd_ultimate,openrd_client) limit: 393216 bytes
> +(openrd_base) actual: 395632 bytes
> +(openrd_base) excess: 2416 bytes
> +(openrd_base,openrd_ultimate,openrd_client) make[1]: *** [Makefile:1014:
u-boot-nodtb.bin] Error 1
> +(openrd_ultimate) actual: 395664 bytes
> +(openrd_ultimate) excess: 2448 bytes
> +(openrd_client) actual: 395680 bytes
> +(openrd_client) excess: 2464 bytes
> And I will be pushing those changes to finally switch travis over to
> gcc-7.3 soon (I had thought I had posted them a long while back so that
> I could have pulled them in right after v2018.05, but I forgot, so here
> we are now..).
Odd I did get those failures initially but then I rebased against master
and didn't see them again. I've been using gcc 7.3 throughout. At the time
I assumed there were some other changes that had shrunk openrd enough for
the dtb to fit. I see Stefan's patch to move the env location. Is that
sufficient or do you want me to either drop openrd or find something that
can be left out?
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-17 8:36 ` Chris Packham
@ 2018-05-17 8:45 ` Chris Packham
2018-05-17 8:48 ` Stefan Roese
0 siblings, 1 reply; 130+ messages in thread
From: Chris Packham @ 2018-05-17 8:45 UTC (permalink / raw)
To: u-boot
On Thu, May 17, 2018 at 8:36 PM Chris Packham <judge.packham@gmail.com>
wrote:
> On Thu, May 17, 2018 at 3:37 AM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Wed, May 16, 2018 at 02:05:03PM +0200, Stefan Roese wrote:
> >
> > > Hi Tom,
> > >
> > > please pull the Kirkwood DT patches from Chris.
> > >
> > > Thanks,
> > > Stefan
> > >
> > > The following changes since commit
0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
> > >
> > > ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15
09:08:00 -0400)
> > >
> > > are available in the Git repository at:
> > >
> > > git://www.denx.de/git/u-boot-marvell.git
> > >
> > > for you to fetch changes up to
a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
> > >
> > > ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53
+0200)
> > >
> >
> > NAK. With gcc-7.3
> > (
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/)
> > I get:
> > arm: + openrd_base openrd_ultimate openrd_client
> > +(openrd_base,openrd_ultimate,openrd_client) u-boot-nodtb.bin exceeds
file size limit:
> > +(openrd_base,openrd_ultimate,openrd_client) limit: 393216 bytes
> > +(openrd_base) actual: 395632 bytes
> > +(openrd_base) excess: 2416 bytes
> > +(openrd_base,openrd_ultimate,openrd_client) make[1]: ***
[Makefile:1014: u-boot-nodtb.bin] Error 1
> > +(openrd_ultimate) actual: 395664 bytes
> > +(openrd_ultimate) excess: 2448 bytes
> > +(openrd_client) actual: 395680 bytes
> > +(openrd_client) excess: 2464 bytes
> >
> > And I will be pushing those changes to finally switch travis over to
> > gcc-7.3 soon (I had thought I had posted them a long while back so that
> > I could have pulled them in right after v2018.05, but I forgot, so here
> > we are now..).
> Odd I did get those failures initially but then I rebased against master
and didn't see them again. I've been using gcc 7.3 throughout. At the time
I assumed there were some other changes that had shrunk openrd enough for
the dtb to fit. I see Stefan's patch to move the env location. Is that
sufficient or do you want me to either drop openrd or find something that
can be left out?
(gmail seems to have forgotten how to wrap quotes)
Sure enough my local branch with this series based on commit cc95535867f4
("bootm.c: Correct the flush_len used in bootm_load_os()") builds
openrd_ultimate is fine. But if I rebase onto commit f2d0f5e7ab3b ("ARM:
re-enable MVGBE for edminiv2") I see the build size errors. I'll do some
digging. Chances are my other MVGBE patch has enabled something unwanted.
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-17 8:45 ` Chris Packham
@ 2018-05-17 8:48 ` Stefan Roese
2018-05-17 9:06 ` Chris Packham
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-05-17 8:48 UTC (permalink / raw)
To: u-boot
Hi Chris,
On 17.05.2018 10:45, Chris Packham wrote:
> On Thu, May 17, 2018 at 8:36 PM Chris Packham <judge.packham@gmail.com>
> wrote:
>
>
>> On Thu, May 17, 2018 at 3:37 AM Tom Rini <trini@konsulko.com> wrote:
>>>
>>> On Wed, May 16, 2018 at 02:05:03PM +0200, Stefan Roese wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> please pull the Kirkwood DT patches from Chris.
>>>>
>>>> Thanks,
>>>> Stefan
>>>>
>>>> The following changes since commit
> 0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
>>>>
>>>> ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15
> 09:08:00 -0400)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>> git://www.denx.de/git/u-boot-marvell.git
>>>>
>>>> for you to fetch changes up to
> a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
>>>>
>>>> ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53
> +0200)
>>>>
>>>
>>> NAK. With gcc-7.3
>>> (
> https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/)
>>> I get:
>>> arm: + openrd_base openrd_ultimate openrd_client
>>> +(openrd_base,openrd_ultimate,openrd_client) u-boot-nodtb.bin exceeds
> file size limit:
>>> +(openrd_base,openrd_ultimate,openrd_client) limit: 393216 bytes
>>> +(openrd_base) actual: 395632 bytes
>>> +(openrd_base) excess: 2416 bytes
>>> +(openrd_base,openrd_ultimate,openrd_client) make[1]: ***
> [Makefile:1014: u-boot-nodtb.bin] Error 1
>>> +(openrd_ultimate) actual: 395664 bytes
>>> +(openrd_ultimate) excess: 2448 bytes
>>> +(openrd_client) actual: 395680 bytes
>>> +(openrd_client) excess: 2464 bytes
>>>
>>> And I will be pushing those changes to finally switch travis over to
>>> gcc-7.3 soon (I had thought I had posted them a long while back so that
>>> I could have pulled them in right after v2018.05, but I forgot, so here
>>> we are now..).
>
>> Odd I did get those failures initially but then I rebased against master
> and didn't see them again. I've been using gcc 7.3 throughout. At the time
> I assumed there were some other changes that had shrunk openrd enough for
> the dtb to fit. I see Stefan's patch to move the env location. Is that
> sufficient or do you want me to either drop openrd or find something that
> can be left out?
>
> (gmail seems to have forgotten how to wrap quotes)
>
> Sure enough my local branch with this series based on commit cc95535867f4
> ("bootm.c: Correct the flush_len used in bootm_load_os()") builds
> openrd_ultimate is fine. But if I rebase onto commit f2d0f5e7ab3b ("ARM:
> re-enable MVGBE for edminiv2") I see the build size errors. I'll do some
> digging. Chances are my other MVGBE patch has enabled something unwanted.
Thanks Chris. But perhaps its also good to increase the image size
for those openrd boards, since we most likely will increase the
size in the near future even further (addition of DM support etc).
Please see:
http://patchwork.ozlabs.org/patch/915135/
Thanks,
Stefan
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-17 8:48 ` Stefan Roese
@ 2018-05-17 9:06 ` Chris Packham
0 siblings, 0 replies; 130+ messages in thread
From: Chris Packham @ 2018-05-17 9:06 UTC (permalink / raw)
To: u-boot
On Thu, May 17, 2018 at 8:48 PM Stefan Roese <sr@denx.de> wrote:
> Hi Chris,
> On 17.05.2018 10:45, Chris Packham wrote:
> > On Thu, May 17, 2018 at 8:36 PM Chris Packham <judge.packham@gmail.com>
> > wrote:
> >
> >
> >> On Thu, May 17, 2018 at 3:37 AM Tom Rini <trini@konsulko.com> wrote:
> >>>
> >>> On Wed, May 16, 2018 at 02:05:03PM +0200, Stefan Roese wrote:
> >>>
> >>>> Hi Tom,
> >>>>
> >>>> please pull the Kirkwood DT patches from Chris.
> >>>>
> >>>> Thanks,
> >>>> Stefan
> >>>>
> >>>> The following changes since commit
> > 0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
> >>>>
> >>>> ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15
> > 09:08:00 -0400)
> >>>>
> >>>> are available in the Git repository at:
> >>>>
> >>>> git://www.denx.de/git/u-boot-marvell.git
> >>>>
> >>>> for you to fetch changes up to
> > a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
> >>>>
> >>>> ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53
> > +0200)
> >>>>
> >>>
> >>> NAK. With gcc-7.3
> >>> (
> >
https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/)
> >>> I get:
> >>> arm: + openrd_base openrd_ultimate openrd_client
> >>> +(openrd_base,openrd_ultimate,openrd_client) u-boot-nodtb.bin exceeds
> > file size limit:
> >>> +(openrd_base,openrd_ultimate,openrd_client) limit: 393216 bytes
> >>> +(openrd_base) actual: 395632 bytes
> >>> +(openrd_base) excess: 2416 bytes
> >>> +(openrd_base,openrd_ultimate,openrd_client) make[1]: ***
> > [Makefile:1014: u-boot-nodtb.bin] Error 1
> >>> +(openrd_ultimate) actual: 395664 bytes
> >>> +(openrd_ultimate) excess: 2448 bytes
> >>> +(openrd_client) actual: 395680 bytes
> >>> +(openrd_client) excess: 2464 bytes
> >>>
> >>> And I will be pushing those changes to finally switch travis over to
> >>> gcc-7.3 soon (I had thought I had posted them a long while back so
that
> >>> I could have pulled them in right after v2018.05, but I forgot, so
here
> >>> we are now..).
> >
> >> Odd I did get those failures initially but then I rebased against
master
> > and didn't see them again. I've been using gcc 7.3 throughout. At the
time
> > I assumed there were some other changes that had shrunk openrd enough
for
> > the dtb to fit. I see Stefan's patch to move the env location. Is that
> > sufficient or do you want me to either drop openrd or find something
that
> > can be left out?
> >
> > (gmail seems to have forgotten how to wrap quotes)
> >
> > Sure enough my local branch with this series based on commit
cc95535867f4
> > ("bootm.c: Correct the flush_len used in bootm_load_os()") builds
> > openrd_ultimate is fine. But if I rebase onto commit f2d0f5e7ab3b ("ARM:
> > re-enable MVGBE for edminiv2") I see the build size errors. I'll do some
> > digging. Chances are my other MVGBE patch has enabled something
unwanted.
> Thanks Chris. But perhaps its also good to increase the image size
> for those openrd boards, since we most likely will increase the
> size in the near future even further (addition of DM support etc).
> Please see:
> http://patchwork.ozlabs.org/patch/915135/
I'm fine with that. We'll probably end up needing it.
I've just sent a patch to not automatically select PHYLIB anyway since my
MVGBE changes weren't the no-op they should have been.
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-05-14 11:58 Stefan Roese
2018-05-14 15:11 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-05-14 11:58 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following MVEBU related patches from Marek and
Chris.
Thanks,
Stefan
The following changes since commit 62d77cea31216cad526e5f45c88e8377efc6fcae:
mmc: Improve tinification (2018-05-13 07:57:32 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ca734a875dec089c3978663a0ce303d776365b20:
phy: marvell: a3700: Fix compatible string for ehci (2018-05-14 10:01:56 +0200)
----------------------------------------------------------------
Chris Packham (6):
ARM: mvebu: a38x: move definition of PEX_CFG_DIRECT_ACCESS
ARM: mvebu: a38x: move sys_env_device_rev_get
ARM: mvebu: a38x: remove some unused code
ARM: mvebu: a38x: sync ddr training code with upstream
ARM: mvebu: a38x: restore support for setting timing
ARM: mvebu: a38x: use non-zero size for ddr scrubbing
Marek Behún (20):
phy: marvell: a3700: Change return type of macro MVEBU_REG
phy: marvell: a3700: Use reg_set16 instead of phy_write16
phy: marvell: a3700: Don't create functional macro for each register
phy: marvell: a3700: Use same timeout for all register polling
phy: marvell: a3700: Use (!ret) instead of (ret == 0)
phy: marvell: a3700: Use reg_set_indirect istead of 2 reg_sets
phy: marvell: a3700: Access USB3 register indirectly on lane 2
phy: marvell: a3700: Set USB3 RX wait depending on ref clock
phy: marvell: mux: Support nontrivial node order in selector register
phy: marvell: a3700: Fix SGMII cfg and stat register addresses
phy: marvell: a3700: Use comphy_mux on Armada 37xx.
phy: marvell: a3700: Save/restore selector reg in SGMII init
driver: clk: Add support for clocks on Armada 37xx
spi: mvebu_a3700_spi: Use Armada 37xx clk driver for SPI clock frequency
clk: armada-37xx: Support soc_clk_dump
phy: marvell: core: Cosmetic fixes
net: mvneta: Fix fault when wrong device tree
watchdog: Add support for Armada 37xx CPU watchdog
arm64: mvebu: Add basic support for the Turris Mox board
phy: marvell: a3700: Fix compatible string for ehci
zachary (1):
phy: marvell: a3700: revise the USB3 comphy setting during power on
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-3720-turris-mox.dts | 132 ++
arch/arm/dts/armada-37xx.dtsi | 35 +-
arch/arm/mach-mvebu/Kconfig | 7 +
arch/arm/mach-mvebu/Makefile | 2 +-
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 1 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 26 +-
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 1 -
board/CZ.NIC/turris_mox/MAINTAINERS | 6 +
board/CZ.NIC/turris_mox/Makefile | 5 +
board/CZ.NIC/turris_mox/turris_mox.c | 127 ++
board/CZ.NIC/turris_omnia/turris_omnia.c | 38 +-
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 21 +-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 21 +-
board/gdsys/a38x/controlcenterdc.c | 22 +-
board/solidrun/clearfog/clearfog.c | 21 +-
configs/mvebu_db-88f3720_defconfig | 3 +
configs/mvebu_espressobin-88f3720_defconfig | 3 +
configs/turris_mox_defconfig | 76 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/mvebu/Kconfig | 11 +
drivers/clk/mvebu/Makefile | 1 +
drivers/clk/mvebu/armada-37xx-periph.c | 499 +++++++
drivers/clk/mvebu/armada-37xx-tbg.c | 154 ++
drivers/ddr/marvell/a38x/Makefile | 10 +-
drivers/ddr/marvell/a38x/ddr3_a38x.c | 736 ----------
drivers/ddr/marvell/a38x/ddr3_a38x.h | 92 --
drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h | 225 ---
drivers/ddr/marvell/a38x/ddr3_a38x_topology.h | 21 -
drivers/ddr/marvell/a38x/ddr3_a38x_training.c | 39 -
drivers/ddr/marvell/a38x/ddr3_debug.c | 742 ++++++----
drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c | 147 --
drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h | 48 -
.../ddr/marvell/a38x/ddr3_hws_hw_training_def.h | 463 ------
drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h | 16 -
drivers/ddr/marvell/a38x/ddr3_init.c | 798 ++---------
drivers/ddr/marvell/a38x/ddr3_init.h | 300 +---
drivers/ddr/marvell/a38x/ddr3_logging_def.h | 10 +-
drivers/ddr/marvell/a38x/ddr3_patterns_64bit.h | 1 +
drivers/ddr/marvell/a38x/ddr3_topology_def.h | 6 +-
drivers/ddr/marvell/a38x/ddr3_training.c | 1491 +++++++++++---------
drivers/ddr/marvell/a38x/ddr3_training_bist.c | 548 +++++--
.../marvell/a38x/ddr3_training_centralization.c | 108 +-
drivers/ddr/marvell/a38x/ddr3_training_db.c | 267 +++-
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 98 +-
drivers/ddr/marvell/a38x/ddr3_training_ip.h | 19 +-
drivers/ddr/marvell/a38x/ddr3_training_ip_bist.h | 6 +-
drivers/ddr/marvell/a38x/ddr3_training_ip_db.h | 71 +-
drivers/ddr/marvell/a38x/ddr3_training_ip_def.h | 34 +-
drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c | 1134 +++++++++------
drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h | 9 +-
drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h | 305 +---
drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h | 17 +-
drivers/ddr/marvell/a38x/ddr3_training_ip_static.h | 30 -
drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 1347 ++++++++++--------
drivers/ddr/marvell/a38x/ddr3_training_leveling.h | 2 +-
drivers/ddr/marvell/a38x/ddr3_training_pbs.c | 201 +--
drivers/ddr/marvell/a38x/ddr3_training_static.c | 538 -------
drivers/ddr/marvell/a38x/ddr_ml_wrapper.h | 148 ++
drivers/ddr/marvell/a38x/ddr_topology_def.h | 82 +-
drivers/ddr/marvell/a38x/mv_ddr_build_message.c | 1 +
drivers/ddr/marvell/a38x/mv_ddr_common.c | 47 +
drivers/ddr/marvell/a38x/mv_ddr_common.h | 20 +
drivers/ddr/marvell/a38x/mv_ddr_plat.c | 1450 +++++++++++++++++++
drivers/ddr/marvell/a38x/mv_ddr_plat.h | 236 ++++
drivers/ddr/marvell/a38x/mv_ddr_regs.h | 446 ++++++
drivers/ddr/marvell/a38x/mv_ddr_spd.c | 377 +++++
drivers/ddr/marvell/a38x/mv_ddr_spd.h | 289 ++++
drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.c | 102 ++
drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h | 117 ++
drivers/ddr/marvell/a38x/mv_ddr_topology.c | 197 +++
drivers/ddr/marvell/a38x/mv_ddr_topology.h | 129 ++
drivers/ddr/marvell/a38x/seq_exec.h | 64 +
drivers/ddr/marvell/a38x/silicon_if.h | 16 -
drivers/ddr/marvell/a38x/xor.c | 185 ++-
drivers/ddr/marvell/a38x/xor.h | 3 +-
drivers/net/mvneta.c | 4 +
drivers/phy/marvell/comphy.h | 42 +-
drivers/phy/marvell/comphy_a3700.c | 415 +++---
drivers/phy/marvell/comphy_a3700.h | 122 +-
drivers/phy/marvell/comphy_core.c | 68 +-
drivers/phy/marvell/comphy_mux.c | 17 +-
drivers/spi/Kconfig | 1 +
drivers/spi/mvebu_a3700_spi.c | 52 +-
drivers/watchdog/Kconfig | 9 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/armada-37xx-wdt.c | 175 +++
include/configs/turris_mox.h | 108 ++
89 files changed, 9734 insertions(+), 6283 deletions(-)
create mode 100644 arch/arm/dts/armada-3720-turris-mox.dts
create mode 100644 board/CZ.NIC/turris_mox/MAINTAINERS
create mode 100644 board/CZ.NIC/turris_mox/Makefile
create mode 100644 board/CZ.NIC/turris_mox/turris_mox.c
create mode 100644 configs/turris_mox_defconfig
create mode 100644 drivers/clk/mvebu/Kconfig
create mode 100644 drivers/clk/mvebu/Makefile
create mode 100644 drivers/clk/mvebu/armada-37xx-periph.c
create mode 100644 drivers/clk/mvebu/armada-37xx-tbg.c
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x.c
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_mc_static.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_topology.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_a38x_training.c
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training.c
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_hw_training_def.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_hws_sil_training.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_training_ip_static.h
delete mode 100644 drivers/ddr/marvell/a38x/ddr3_training_static.c
create mode 100644 drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_build_message.c
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_common.c
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_common.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_plat.c
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_plat.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_regs.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_spd.c
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_spd.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.c
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_topology.c
create mode 100644 drivers/ddr/marvell/a38x/mv_ddr_topology.h
create mode 100644 drivers/ddr/marvell/a38x/seq_exec.h
delete mode 100644 drivers/ddr/marvell/a38x/silicon_if.h
create mode 100644 drivers/watchdog/armada-37xx-wdt.c
create mode 100644 include/configs/turris_mox.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-14 11:58 Stefan Roese
@ 2018-05-14 15:11 ` Tom Rini
2018-05-14 15:16 ` Stefan Roese
0 siblings, 1 reply; 130+ messages in thread
From: Tom Rini @ 2018-05-14 15:11 UTC (permalink / raw)
To: u-boot
On Mon, May 14, 2018 at 01:58:59PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following MVEBU related patches from Marek and
> Chris.
>
> Thanks,
> Stefan
>
> The following changes since commit 62d77cea31216cad526e5f45c88e8377efc6fcae:
>
> mmc: Improve tinification (2018-05-13 07:57:32 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to ca734a875dec089c3978663a0ce303d776365b20:
>
> phy: marvell: a3700: Fix compatible string for ehci (2018-05-14 10:01:56 +0200)
>
Applied to u-boot/master.
But please note that drivers/ddr/marvell/a38x/mv_ddr_build_message.c is
both missing an SPDX tag and oddly formatted. I assume there's a good
reason those two variables exist in the way they do and that we can't
just fold that into some other files, so please look into what the
correct SPDX tag and copyright line should be for that content, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180514/aa31afcb/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-14 15:11 ` Tom Rini
@ 2018-05-14 15:16 ` Stefan Roese
2018-05-15 1:23 ` Chris Packham
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-05-14 15:16 UTC (permalink / raw)
To: u-boot
Hi Tom,
(Cc'ing Chris)
On 14.05.2018 17:11, Tom Rini wrote:
> On Mon, May 14, 2018 at 01:58:59PM +0200, Stefan Roese wrote:
>
>> Hi Tom,
>>
>> please pull the following MVEBU related patches from Marek and
>> Chris.
>>
>> Thanks,
>> Stefan
>>
>> The following changes since commit 62d77cea31216cad526e5f45c88e8377efc6fcae:
>>
>> mmc: Improve tinification (2018-05-13 07:57:32 -0400)
>>
>> are available in the Git repository at:
>>
>> git://www.denx.de/git/u-boot-marvell.git
>>
>> for you to fetch changes up to ca734a875dec089c3978663a0ce303d776365b20:
>>
>> phy: marvell: a3700: Fix compatible string for ehci (2018-05-14 10:01:56 +0200)
>>
>
> Applied to u-boot/master.
>
> But please note that drivers/ddr/marvell/a38x/mv_ddr_build_message.c is
> both missing an SPDX tag and oddly formatted. I assume there's a good
> reason those two variables exist in the way they do and that we can't
> just fold that into some other files, so please look into what the
> correct SPDX tag and copyright line should be for that content, thanks!
Thanks Tom, I didn't spot this.
Chris, I assume that we need this file (this way) for compatibility
(potential later re-sync) with the Marvell code? Is this correct?
Or could this be done in a different way? Please check and add the
SPDX tag and copyright line as requested by Tom.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-05-14 15:16 ` Stefan Roese
@ 2018-05-15 1:23 ` Chris Packham
0 siblings, 0 replies; 130+ messages in thread
From: Chris Packham @ 2018-05-15 1:23 UTC (permalink / raw)
To: u-boot
Hi Tom, Stefan,
On Tue, May 15, 2018 at 3:16 AM Stefan Roese <sr@denx.de> wrote:
> Hi Tom,
> (Cc'ing Chris)
> On 14.05.2018 17:11, Tom Rini wrote:
> > On Mon, May 14, 2018 at 01:58:59PM +0200, Stefan Roese wrote:
> >
> >> Hi Tom,
> >>
> >> please pull the following MVEBU related patches from Marek and
> >> Chris.
> >>
> >> Thanks,
> >> Stefan
> >>
> >> The following changes since commit
62d77cea31216cad526e5f45c88e8377efc6fcae:
> >>
> >> mmc: Improve tinification (2018-05-13 07:57:32 -0400)
> >>
> >> are available in the Git repository at:
> >>
> >> git://www.denx.de/git/u-boot-marvell.git
> >>
> >> for you to fetch changes up to
ca734a875dec089c3978663a0ce303d776365b20:
> >>
> >> phy: marvell: a3700: Fix compatible string for ehci (2018-05-14
10:01:56 +0200)
> >>
> >
> > Applied to u-boot/master.
> >
> > But please note that drivers/ddr/marvell/a38x/mv_ddr_build_message.c is
> > both missing an SPDX tag and oddly formatted. I assume there's a good
> > reason those two variables exist in the way they do and that we can't
> > just fold that into some other files, so please look into what the
> > correct SPDX tag and copyright line should be for that content, thanks!
> Thanks Tom, I didn't spot this.
> Chris, I assume that we need this file (this way) for compatibility
> (potential later re-sync) with the Marvell code? Is this correct?
> Or could this be done in a different way? Please check and add the
> SPDX tag and copyright line as requested by Tom.
Yeah it is an oddity. In Marvell's version of the code that file is
actually generated[1] based on the tags/commit id. Which when ported to
u-boot loses some of it's meaning (saying "mv_ddr-armada-17.10.4" is still
helpful to identify which upstream tag we're in sync with). I looked at
folding it into the code but that just increases the delta with the
original upstream code. I'll send a patch to add a SPDX license line to the
top of the file and re-format it.
--
[1] -
https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/blob/mv_ddr-armada-17.02/Makefile#L174
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-04-17 8:53 Stefan Roese
2018-04-17 19:39 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-04-17 8:53 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the small mv_sdhci fix from Matt from the Marvell
repo.
Thanks,
Stefan
The following changes since commit 8c0a17be0a632b9a823e14628c42f85c3e64f08e:
Prepare v2018.05-rc2 (2018-04-16 20:00:14 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ca4e7d674ee6931c7a4effd697e644d7646cfac0:
mmc: mv_sdhci: zero out sdhci_host structure (2018-04-17 10:39:30 +0200)
----------------------------------------------------------------
Matt Pelland (1):
mmc: mv_sdhci: zero out sdhci_host structure
drivers/mmc/mv_sdhci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-04-17 8:53 Stefan Roese
@ 2018-04-17 19:39 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-04-17 19:39 UTC (permalink / raw)
To: u-boot
On Tue, Apr 17, 2018 at 10:53:21AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the small mv_sdhci fix from Matt from the Marvell
> repo.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 8c0a17be0a632b9a823e14628c42f85c3e64f08e:
>
> Prepare v2018.05-rc2 (2018-04-16 20:00:14 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to ca4e7d674ee6931c7a4effd697e644d7646cfac0:
>
> mmc: mv_sdhci: zero out sdhci_host structure (2018-04-17 10:39:30 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180417/8e17753d/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-01-29 12:42 Stefan Roese
2018-01-29 16:55 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-01-29 12:42 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the 2 mrvl_uart patches from Andreas.
Thanks,
Stefan
The following changes since commit bd39d86420434eb8139a111c2582366bc90e65c6:
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot (2018-01-28 18:26:00 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ceb328180353f103bb7a3bc75770ed03e9a8fef2:
tools/mrvl_uart.sh: Tidy script output (2018-01-29 13:36:32 +0100)
----------------------------------------------------------------
Andreas Färber (2):
tools/mrvl_uart.sh: Fix minicom baudrate
tools/mrvl_uart.sh: Tidy script output
tools/mrvl_uart.sh | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-01-29 12:42 Stefan Roese
@ 2018-01-29 16:55 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-01-29 16:55 UTC (permalink / raw)
To: u-boot
On Mon, Jan 29, 2018 at 01:42:11PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the 2 mrvl_uart patches from Andreas.
>
> Thanks,
> Stefan
>
>
> The following changes since commit bd39d86420434eb8139a111c2582366bc90e65c6:
>
> Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot (2018-01-28 18:26:00 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to ceb328180353f103bb7a3bc75770ed03e9a8fef2:
>
> tools/mrvl_uart.sh: Tidy script output (2018-01-29 13:36:32 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180129/f1ac6226/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-01-20 9:01 Stefan Roese
2018-01-20 16:58 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-01-20 9:01 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following patches for the Marvell A38x DDR
code from Chris.
Thanks,
Stefan
The following changes since commit 086ebcd40e9bf8efc520f1b177fd8e3cc0e506fa:
Merge git://git.denx.de/u-boot-fsl-qoriq (2018-01-17 13:48:35 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 672e5598301b63f95d7dcceb4436f3cb40643f88:
ddr: marvell: update ddr controller init and freq (2018-01-19 16:30:29 +0100)
----------------------------------------------------------------
Chris Packham (4):
ddr: marvell: only assert M_ODT[0] on write for a single CS
ddr: marvell: use correct TREFI value
ddr: marvell: update additional ODT setting
ddr: marvell: update ddr controller init and freq
drivers/ddr/marvell/a38x/ddr3_init.h | 3 +-
drivers/ddr/marvell/a38x/ddr3_topology_def.h | 3 +-
drivers/ddr/marvell/a38x/ddr3_training.c | 50 +++++++++++++++---------
drivers/ddr/marvell/a38x/ddr3_training_db.c | 19 +++++----
drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 22 +++++++----
drivers/ddr/marvell/a38x/ddr3_training_static.c | 3 +-
6 files changed, 62 insertions(+), 38 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-01-20 9:01 Stefan Roese
@ 2018-01-20 16:58 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-01-20 16:58 UTC (permalink / raw)
To: u-boot
On Sat, Jan 20, 2018 at 10:01:20AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following patches for the Marvell A38x DDR
> code from Chris.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 086ebcd40e9bf8efc520f1b177fd8e3cc0e506fa:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2018-01-17 13:48:35 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 672e5598301b63f95d7dcceb4436f3cb40643f88:
>
> ddr: marvell: update ddr controller init and freq (2018-01-19 16:30:29 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180120/88b9da19/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2018-01-10 11:40 Stefan Roese
2018-01-10 16:42 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2018-01-10 11:40 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell related patches.
Thanks,
Stefan
The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
Prepare v2018.01 (2018-01-08 20:25:29 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 0a05bf42b462c0fd0299c768560c5ad532cdf619:
ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC (2018-01-10 12:36:52 +0100)
----------------------------------------------------------------
Andre Heider (4):
arm64: a37xx: use disto defaults
arm64: a37xx: add distro compatible env vars
arm64: a37xx: defconfigs: enable CONFIG_DISTRO_DEFAULTS
arm64: a37xx: use distro bootcmd
Chris Packham (1):
ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC
Florian Klink (1):
arm: mvebu: ClearFog: document boot selection switches, update UART
Konstantin Porotchkin (1):
tools: Add Marvell recovery image download script
Miquel Raynal (2):
ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs
pinctrl: mvebu: Make drivers depend on the pinctrl framework
arch/arm/dts/armada-385-amc.dts | 2 +-
board/solidrun/clearfog/README | 21 ++++-
configs/mvebu_db-88f3720_defconfig | 1 +
configs/mvebu_espressobin-88f3720_defconfig | 1 +
drivers/net/Kconfig | 6 +-
drivers/pinctrl/mvebu/Kconfig | 4 +-
include/configs/mvebu_armada-37xx.h | 23 +++++-
tools/mrvl_uart.sh | 119 ++++++++++++++++++++++++++++
8 files changed, 164 insertions(+), 13 deletions(-)
create mode 100755 tools/mrvl_uart.sh
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2018-01-10 11:40 Stefan Roese
@ 2018-01-10 16:42 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2018-01-10 16:42 UTC (permalink / raw)
To: u-boot
On Wed, Jan 10, 2018 at 12:40:37PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following Marvell related patches.
>
> Thanks,
> Stefan
>
>
> The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
>
> Prepare v2018.01 (2018-01-08 20:25:29 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 0a05bf42b462c0fd0299c768560c5ad532cdf619:
>
> ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC (2018-01-10 12:36:52 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180110/c082b518/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-11-30 12:33 Stefan Roese
2017-11-30 18:45 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-11-30 12:33 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following MVEBU related changes.
Thanks,
Stefan
The following changes since commit b06c46de632c55f4c39d404c6f0f65e414b31050:
Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze (2017-11-29 08:26:07 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 01c541e0e698196ab29761fd29fd06f36185e03e:
arm: mvebu: correct comments around cas_wl/cas_l (2017-11-30 08:30:59 +0100)
----------------------------------------------------------------
Baruch Siach (1):
arm64: mvebu: armada-7k/8k: drop useless #ifdef
Chris Packham (1):
arm: mvebu: correct comments around cas_wl/cas_l
Sean Nyekjaer (4):
fix: nand: pxa3xx: fix defined but not used warnings
arm: mvebu: add nand pins
arm: mvebu: fix boot from UART when in fallback mode
arm: mvebu: enable boot from NAND
arch/arm/dts/armada-38x.dtsi | 15 ++++++++++++++-
arch/arm/mach-mvebu/include/mach/soc.h | 7 +++++++
arch/arm/mach-mvebu/spl.c | 25 +++++++++++++++++++++++--
board/CZ.NIC/turris_omnia/turris_omnia.c | 4 ++--
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 2 +-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 2 +-
board/gdsys/a38x/controlcenterdc.c | 2 +-
board/solidrun/clearfog/clearfog.c | 2 +-
drivers/mtd/nand/pxa3xx_nand.c | 2 ++
include/configs/mvebu_armada-8k.h | 5 -----
10 files changed, 52 insertions(+), 14 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-11-30 12:33 Stefan Roese
@ 2017-11-30 18:45 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-11-30 18:45 UTC (permalink / raw)
To: u-boot
On Thu, Nov 30, 2017 at 01:33:43PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following MVEBU related changes.
>
> Thanks,
> Stefan
>
> The following changes since commit b06c46de632c55f4c39d404c6f0f65e414b31050:
>
> Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze (2017-11-29 08:26:07 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 01c541e0e698196ab29761fd29fd06f36185e03e:
>
> arm: mvebu: correct comments around cas_wl/cas_l (2017-11-30 08:30:59 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171130/101087f5/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-11-16 13:09 Stefan Roese
2017-11-17 1:52 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-11-16 13:09 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following pending patches for MVEBU.
Thanks,
Stefan
The following changes since commit c253573f3e269fd9a24ee6684d87dd91106018a5:
Prepare v2017.11 (2017-11-13 20:08:06 -0500)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 8c1ce928f498774a3e2c3aa03534b6e6ca6d4759:
arm: mvebu: clearfog: update SPI flash DT description (2017-11-16 11:45:20 +0100)
----------------------------------------------------------------
Baruch Siach (1):
arm: mvebu: clearfog: update SPI flash DT description
Heinrich Schuchardt (1):
arm: mvebu: configs: Enable DISTRO_DEFAULTS for MACCHIATObin
Jon Nettleton (4):
mvebu: usb: xhci: a38x support
arm: mvebu: Add board_setup for xhci hardware
arm: mvebu: clearfog: enable XHCI USB
arm: mvebu: clearfog: Fix SPI-NOR flash access
Stefan Roese (1):
arm: mvebu: theadorable_debug_defconfig: Enable setexpr command
VlaoMao (1):
pci: mvebu: Increase size of PCIe default mapping
arch/arm/dts/armada-388-clearfog.dts | 10 ++++----
arch/arm/mach-mvebu/cpu.c | 41 +++++++++++++++++++++++++++++++++
board/Marvell/mvebu_armada-37xx/board.c | 2 +-
board/Marvell/mvebu_armada-8k/board.c | 2 +-
configs/clearfog_defconfig | 6 ++++-
configs/mvebu_db_armada8k_defconfig | 1 +
configs/mvebu_mcbin-88f8040_defconfig | 1 +
configs/theadorable_debug_defconfig | 1 -
drivers/pci/pci_mvebu.c | 4 ++--
drivers/usb/host/xhci-mvebu.c | 5 ++--
include/configs/clearfog.h | 4 +---
11 files changed, 60 insertions(+), 17 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-11-16 13:09 Stefan Roese
@ 2017-11-17 1:52 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-11-17 1:52 UTC (permalink / raw)
To: u-boot
On Thu, Nov 16, 2017 at 02:09:40PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following pending patches for MVEBU.
>
> Thanks,
> Stefan
>
>
> The following changes since commit c253573f3e269fd9a24ee6684d87dd91106018a5:
>
> Prepare v2017.11 (2017-11-13 20:08:06 -0500)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 8c1ce928f498774a3e2c3aa03534b6e6ca6d4759:
>
> arm: mvebu: clearfog: update SPI flash DT description (2017-11-16 11:45:20 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171116/e031fad9/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-09-26 8:55 Stefan Roese
2017-09-27 2:45 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-09-26 8:55 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following MVEBU related patches.
Thanks,
Stefan
The following changes since commit 1f6049e2501b5c35c61435dbc05ba96743202674:
tools/mkimage: Make the path to the dtc binary that mkimage calls configurable (2017-09-24 07:33:03 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 0d106f1e731a4ea47eaeb4b70cc8b4fcc13a3e40:
arm: mvebu: clearfog: document boot from UART (2017-09-26 06:53:26 +0200)
----------------------------------------------------------------
Baruch Siach (2):
arm: mvebu: fix boot from UART on ClearFog Base
arm: mvebu: clearfog: document boot from UART
Chris Packham (4):
ARM: mvebu: Convert CONFIG_MVNETA to Kconfig
ARM: mvebu: Add SoC IDs for Marvell's integrated CPUs
ARM: mvebu: add SAR frequency values for 1.8/2.0GHz
ARM: mvebu: handle unused DRAM banks with ECC enabled
Joshua Scott (1):
ARM: mvebu: add additional information to board_add_ram_info()
Stefan Roese (1):
arm: mvebu: Remove theadorable_defconfig
arch/arm/mach-mvebu/cpu.c | 30 +++++++++++++----
arch/arm/mach-mvebu/dram.c | 51 +++++++++++++++++++++++++++--
arch/arm/mach-mvebu/include/mach/config.h | 3 --
arch/arm/mach-mvebu/include/mach/cpu.h | 1 +
arch/arm/mach-mvebu/include/mach/soc.h | 4 +++
arch/arm/mach-mvebu/spl.c | 3 ++
board/solidrun/clearfog/README | 20 ++++++++++++
board/theadorable/MAINTAINERS | 1 -
configs/clearfog_defconfig | 2 +-
configs/controlcenterdc_defconfig | 2 +-
configs/db-88f6820-amc_defconfig | 2 +-
configs/db-88f6820-gp_defconfig | 2 +-
configs/db-mv784mp-gp_defconfig | 2 +-
configs/ds414_defconfig | 2 +-
configs/maxbcm_defconfig | 2 +-
configs/theadorable_debug_defconfig | 2 +-
configs/theadorable_defconfig | 54 -------------------------------
configs/turris_omnia_defconfig | 2 +-
drivers/net/Kconfig | 8 +++++
include/configs/mvebu_armada-37xx.h | 1 -
scripts/config_whitelist.txt | 1 -
21 files changed, 116 insertions(+), 79 deletions(-)
delete mode 100644 configs/theadorable_defconfig
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-09-26 8:55 Stefan Roese
@ 2017-09-27 2:45 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-09-27 2:45 UTC (permalink / raw)
To: u-boot
On Tue, Sep 26, 2017 at 10:55:16AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following MVEBU related patches.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 1f6049e2501b5c35c61435dbc05ba96743202674:
>
> tools/mkimage: Make the path to the dtc binary that mkimage calls configurable (2017-09-24 07:33:03 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 0d106f1e731a4ea47eaeb4b70cc8b4fcc13a3e40:
>
> arm: mvebu: clearfog: document boot from UART (2017-09-26 06:53:26 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170926/90763ff0/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-08-30 8:06 Stefan Roese
2017-09-01 16:42 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-08-30 8:06 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull this last minute fix from Chris, which is needed
to get SPI NOR working on current master.
Thanks,
Stefan
The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to dbc3e64fd1d416395def9b555a9b76e84d6f44f3:
ARM: mvebu: add "spi-flash" compatible string (2017-08-30 10:03:35 +0200)
----------------------------------------------------------------
Chris Packham (1):
ARM: mvebu: add "spi-flash" compatible string
arch/arm/dts/armada-385-amc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-08-30 8:06 Stefan Roese
@ 2017-09-01 16:42 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-09-01 16:42 UTC (permalink / raw)
To: u-boot
On Wed, Aug 30, 2017 at 10:06:30AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull this last minute fix from Chris, which is needed
> to get SPI NOR working on current master.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 8b3cec7da18645eda7f7cd0b65ee9f2dac573409:
>
> mtdparts: Fix uninitialized scalar usage (2017-08-26 16:59:24 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to dbc3e64fd1d416395def9b555a9b76e84d6f44f3:
>
> ARM: mvebu: add "spi-flash" compatible string (2017-08-30 10:03:35 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170901/24b496ee/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-08-21 9:43 Stefan Roese
2017-08-22 20:53 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-08-21 9:43 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull this one mvebu fix from Chris.
Thanks,
Stefan
The following changes since commit 2d7cb5b426e7e0cdf684d7f8029ad132d7a8d383:
env: Replace all open-coded gd->env_valid values with ENV_ flags (2017-08-20 19:27:44 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 6ab09b05f3707276ff84f7759f3484b597e80581:
ARM: mvebu: set correct mem_size for db-88f6820-amc (2017-08-21 11:40:49 +0200)
----------------------------------------------------------------
Chris Packham (1):
ARM: mvebu: set correct mem_size for db-88f6820-amc
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 2 +-
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-08-21 9:43 Stefan Roese
@ 2017-08-22 20:53 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-08-22 20:53 UTC (permalink / raw)
To: u-boot
On Mon, Aug 21, 2017 at 11:43:22AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull this one mvebu fix from Chris.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 2d7cb5b426e7e0cdf684d7f8029ad132d7a8d383:
>
> env: Replace all open-coded gd->env_valid values with ENV_ flags (2017-08-20 19:27:44 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 6ab09b05f3707276ff84f7759f3484b597e80581:
>
> ARM: mvebu: set correct mem_size for db-88f6820-amc (2017-08-21 11:40:49 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170822/005d4c36/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-08-10 8:26 Stefan Roese
2017-08-10 20:17 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-08-10 8:26 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the mvpp2x net patches from Stefan Chulski, which have
been missed for quite some time. All have been acked by Joe.
Thanks,
Stefan
The following changes since commit d529124fdcf941c34074fd1ce600f4b1b4a7dd07:
Merge git://git.denx.de/u-boot-x86 (2017-08-08 17:06:19 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ceec6c48a472514e6110d07064006258376d4537:
net: mvpp2x: Set BM poll size once during priv probe (2017-08-10 08:33:02 +0200)
----------------------------------------------------------------
Stefan Chulski (10):
net: mvpp2x: Add GPIO configuration support
net: mvpp2x: fix phy connected to wrong mdio issue
net: mvpp2x: Enable GoP packet padding in TX
net: mvpp2x: fix BM configuration overrun issue
net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
net: mvpp2x: remove MBUS configurations from MvPP22 driver
net: mvpp2x: Remove IRQ configuration from U-Boot
net: mvpp2x: Set BM pool high address
net: mvpp2x: remove TX drain from transmit routine
net: mvpp2x: Set BM poll size once during priv probe
drivers/net/mvpp2.c | 187 +++++++++++++++++++++++++---------------------------
1 file changed, 89 insertions(+), 98 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-08-10 8:26 Stefan Roese
@ 2017-08-10 20:17 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-08-10 20:17 UTC (permalink / raw)
To: u-boot
On Thu, Aug 10, 2017 at 10:26:32AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the mvpp2x net patches from Stefan Chulski, which have
> been missed for quite some time. All have been acked by Joe.
>
> Thanks,
> Stefan
>
>
> The following changes since commit d529124fdcf941c34074fd1ce600f4b1b4a7dd07:
>
> Merge git://git.denx.de/u-boot-x86 (2017-08-08 17:06:19 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to ceec6c48a472514e6110d07064006258376d4537:
>
> net: mvpp2x: Set BM poll size once during priv probe (2017-08-10 08:33:02 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170810/1dada2a7/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-08-08 12:26 Stefan Roese
2017-08-09 15:26 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-08-08 12:26 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following mvebu board fix from Marek.
Thanks,
Stefan
The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04 20:38:39 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 8daa3468b52f89e069bca469a68b866c2583a4a5:
mvebu: turris_omnia: Fix PEX vs SATA detection for board topology (2017-08-08 14:20:26 +0200)
----------------------------------------------------------------
Marek Behún (1):
mvebu: turris_omnia: Fix PEX vs SATA detection for board topology
board/CZ.NIC/turris_omnia/turris_omnia.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-08-08 12:26 Stefan Roese
@ 2017-08-09 15:26 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-08-09 15:26 UTC (permalink / raw)
To: u-boot
On Tue, Aug 08, 2017 at 02:26:59PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following mvebu board fix from Marek.
>
> Thanks,
> Stefan
>
>
> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
>
> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04 20:38:39 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 8daa3468b52f89e069bca469a68b866c2583a4a5:
>
> mvebu: turris_omnia: Fix PEX vs SATA detection for board topology (2017-08-08 14:20:26 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170809/e4c87a94/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-07-12 6:00 Stefan Roese
2017-07-12 14:25 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-07-12 6:00 UTC (permalink / raw)
To: u-boot
Hi Tim,
please pull the following Marvell / MVEBU patches. Travis
has some timeouts so I was not able to build there, but
all MVEBU boards build without issues.
Thanks,
Stefan
The following changes since commit 8d3a25685e4aac7070365a2b3c53c2c81b27930f:
Merge git://git.denx.de/u-boot-dm (2017-07-11 20:28:46 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 172b2e0b561a50a3d8c4275be4ed24b0c8e18896:
arm: mvebu: clearfog: fix chip name comment (2017-07-12 06:57:55 +0200)
----------------------------------------------------------------
Baruch Siach (4):
tools/kwbimage: update the list of SoCs using v1 header
tools/kwbimage.h: make offset marks style consistent
tools/kwbimage: fix v1 header verification
arm: mvebu: clearfog: fix chip name comment
Igal Liberman (1):
arm64: mvebu: use single defconfig for Armada8K development boards
Marek Behún (6):
driver/ddr: Add support for setting timing in hws_topology_map
orion_wdt: Support for the Orion Watchdog
arch/arm/dts: Add Turris Omnia device tree
drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support
drivers/misc: Add basic support for ATSHA204A Crypto module
marvell: armada385: Add the Turris Omnia board
arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi | 55 +++
arch/arm/dts/armada-385-turris-omnia.dts | 392 +++++++++++++++
arch/arm/mach-mvebu/Kconfig | 22 +
board/CZ.NIC/turris_omnia/Makefile | 7 +
board/CZ.NIC/turris_omnia/kwbimage.cfg | 12 +
board/CZ.NIC/turris_omnia/turris_omnia.c | 530 +++++++++++++++++++++
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 3 +-
board/Marvell/db-88f6820-gp/db-88f6820-gp.c | 3 +-
board/gdsys/a38x/controlcenterdc.c | 3 +-
board/solidrun/clearfog/clearfog.c | 3 +-
board/solidrun/clearfog/kwbimage.cfg | 2 +-
configs/mvebu_db-88f7040-nand_defconfig | 72 ---
configs/mvebu_db-88f7040_defconfig | 70 ---
...f8040_defconfig => mvebu_db_armada8k_defconfig} | 0
configs/turris_omnia_defconfig | 62 +++
doc/README.marvell | 53 +++
drivers/ddr/marvell/a38x/ddr3_training.c | 6 +
drivers/ddr/marvell/a38x/ddr_topology_def.h | 9 +
drivers/i2c/muxes/pca954x.c | 42 +-
drivers/misc/Kconfig | 8 +
drivers/misc/Makefile | 1 +
drivers/misc/atsha204a-i2c.c | 408 ++++++++++++++++
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/orion_wdt.c | 177 +++++++
include/atsha204a-i2c.h | 69 +++
include/configs/turris_omnia.h | 178 +++++++
tools/kwbimage.c | 34 +-
tools/kwbimage.h | 64 +--
29 files changed, 2105 insertions(+), 188 deletions(-)
create mode 100644 arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-385-turris-omnia.dts
create mode 100644 board/CZ.NIC/turris_omnia/Makefile
create mode 100644 board/CZ.NIC/turris_omnia/kwbimage.cfg
create mode 100644 board/CZ.NIC/turris_omnia/turris_omnia.c
delete mode 100644 configs/mvebu_db-88f7040-nand_defconfig
delete mode 100644 configs/mvebu_db-88f7040_defconfig
rename configs/{mvebu_db-88f8040_defconfig => mvebu_db_armada8k_defconfig} (100%)
create mode 100644 configs/turris_omnia_defconfig
create mode 100644 doc/README.marvell
create mode 100644 drivers/misc/atsha204a-i2c.c
create mode 100644 drivers/watchdog/orion_wdt.c
create mode 100644 include/atsha204a-i2c.h
create mode 100644 include/configs/turris_omnia.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-07-12 6:00 Stefan Roese
@ 2017-07-12 14:25 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-07-12 14:25 UTC (permalink / raw)
To: u-boot
On Wed, Jul 12, 2017 at 08:00:02AM +0200, Stefan Roese wrote:
> Hi Tim,
>
> please pull the following Marvell / MVEBU patches. Travis
> has some timeouts so I was not able to build there, but
> all MVEBU boards build without issues.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 8d3a25685e4aac7070365a2b3c53c2c81b27930f:
>
> Merge git://git.denx.de/u-boot-dm (2017-07-11 20:28:46 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 172b2e0b561a50a3d8c4275be4ed24b0c8e18896:
>
> arm: mvebu: clearfog: fix chip name comment (2017-07-12 06:57:55 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170712/c2373a96/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-06-23 8:42 Stefan Roese
2017-06-23 13:22 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-06-23 8:42 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull 2 mvebu related pinctrl bug-fixes from Ken.
Thanks,
Stefan
The following changes since commit 235c5b8315c6a9eb566fd3d99a098cc6db869fc5:
Merge branch 'master' of git://git.denx.de/u-boot-samsung (2017-06-21 08:01:07 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ae118b6855a7d003a7d024129e686c8a4a400141:
pinctrl: a3700: Fix the issue that gpio controller is registered with wrong node id (2017-06-23 07:09:40 +0200)
----------------------------------------------------------------
Ken Ma (2):
pinctrl: a3700: Fix uart2 group selection register mask
pinctrl: a3700: Fix the issue that gpio controller is registered with wrong node id
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-06-23 8:42 Stefan Roese
@ 2017-06-23 13:22 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-06-23 13:22 UTC (permalink / raw)
To: u-boot
On Fri, Jun 23, 2017 at 10:42:42AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull 2 mvebu related pinctrl bug-fixes from Ken.
>
> Thanks,
> Stefan
>
> The following changes since commit 235c5b8315c6a9eb566fd3d99a098cc6db869fc5:
>
> Merge branch 'master' of git://git.denx.de/u-boot-samsung (2017-06-21 08:01:07 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to ae118b6855a7d003a7d024129e686c8a4a400141:
>
> pinctrl: a3700: Fix the issue that gpio controller is registered with wrong node id (2017-06-23 07:09:40 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170623/c9663ec2/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-05-31 9:02 Stefan Roese
2017-06-01 12:10 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-05-31 9:02 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell changes, mostly including
the Armada 37xx pinctrl / gpio driver.
Thanks,
Stefan
The following changes since commit ccbbada0a59fead35495409d0c2c7bcb22a40278:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-30 14:07:23 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 6cbf7eda3cbe0f8cbaa84b4daaa86dfa2a696a77:
arm: mvebu: kwbimage: inline function to fix use-after-free (2017-05-31 07:43:04 +0200)
----------------------------------------------------------------
Gregory CLEMENT (4):
arm64: mvebu: Add pinctrl nodes for Armada 3700
arm64: mvebu: armada37xx: add pinctrl definition
pinctrl: armada-37xx: Add pin controller support for Armada 37xx
pinctrl: armada-37xx: Add gpio support
Patrick Wildt (3):
arm: mvebu: clearfog: reset uSOM onboard 1512 phy
arm: mvebu: clearfog: generic distro bootcmd
arm: mvebu: kwbimage: inline function to fix use-after-free
Stefan Roese (4):
pinctrl: mvebu: Enable support for the Armada 37xx pinctrl driver
arm64: mvebu_db-88f3720_defconfig: Enable PINCTRL and GPIO support
arm64: mvebu: armada-7040-db: Enable 10GB port 0 / SFI (KR)
arm64: mvebu: Replace board specific with generic memory bank decoding
arch/arm/dts/armada-3720-db.dts | 8 +
arch/arm/dts/armada-37xx.dtsi | 73 ++++
arch/arm/dts/armada-7040-db.dts | 8 +-
arch/arm/mach-mvebu/arm64-common.c | 66 +--
board/solidrun/clearfog/clearfog.c | 4 +
configs/clearfog_defconfig | 10 +-
configs/mvebu_db-88f3720_defconfig | 5 +
configs/mvebu_db-88f7040-nand_defconfig | 8 +-
configs/mvebu_db-88f7040_defconfig | 1 +
configs/mvebu_db-88f8040_defconfig | 1 +
configs/mvebu_mcbin-88f8040_defconfig | 1 +
drivers/pinctrl/Makefile | 2 +-
drivers/pinctrl/mvebu/Kconfig | 18 +-
drivers/pinctrl/mvebu/Makefile | 3 +-
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 631 ++++++++++++++++++++++++++++
include/configs/clearfog.h | 48 ++-
tools/kwbimage.c | 93 ++--
17 files changed, 851 insertions(+), 129 deletions(-)
create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-05-31 9:02 Stefan Roese
@ 2017-06-01 12:10 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-06-01 12:10 UTC (permalink / raw)
To: u-boot
On Wed, May 31, 2017 at 11:02:20AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following Marvell changes, mostly including
> the Armada 37xx pinctrl / gpio driver.
>
> Thanks,
> Stefan
>
> The following changes since commit ccbbada0a59fead35495409d0c2c7bcb22a40278:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-05-30 14:07:23 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 6cbf7eda3cbe0f8cbaa84b4daaa86dfa2a696a77:
>
> arm: mvebu: kwbimage: inline function to fix use-after-free (2017-05-31 07:43:04 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170601/5c31ddee/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-05-09 14:45 Stefan Roese
2017-05-09 23:49 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-05-09 14:45 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the first batch of Marvell related patches
in this merge window.
Thanks,
Stefan
The following changes since commit 2f92629112a1055ed37f8b05dfcf00c3f1875503:
Merge branch 'next' of git://git.denx.de/u-boot-spi (2017-05-08 15:44:52 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to e38f5fc8d80d946b401ba0e9ba0fcb52d6e7e74b:
ARM: mvebu: switch db-88f6820-amc to DM for i2c (2017-05-09 13:38:18 +0200)
----------------------------------------------------------------
Chris Packham (1):
ARM: mvebu: switch db-88f6820-amc to DM for i2c
Igal Liberman (5):
fix: phy: marvell: cp110: sata: update analog parameters according to latest ETP
phy: marvell: cp110: add 5G XFI mode
fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP
fix: phy: marvell: cp110: rename comphy_index to cp_index
fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP
Konstantin Porotchkin (9):
fix: mvebu: pcie_dw: Allow probing empty PCIe slots
mvebu: dts: a80x0: Sync the DB DTS with standard config A
arm64: mvebu: Trigger PCI devices scan at early init stage
arm64: mvebu: a8k: Add support for NAND clock get
arm64: a8k: dts: Add support for NAND devices on A8K platform
arm64: mvebu: a8k: Add NAND configuration parameters
fix: mvebu_ comphy: Update COMPHY sequence number
fix: nand: pxa3xx: Remove hardcode values from the driver
arm64: mvebu: Fix the bubt comamnd NAND device support
Stefan Roese (9):
net: mvpp2: Add remove function that is called before the OS is started
phy: marvell: Replace PHY_TYPE_KR with PHY_TYPE_SFI
phy: marvell: cp110: add support for end point configuration
phy: marvell: cp110: update utmi phy connection type
phy: marvell: add IGNORE COMPHY type
fix: phy: marvell: cp110: fix the KR/SFI line 4 selector
fix: phy: marvell: cp110: update comphy selector option
fix: phy: marvell: cp110: fix comphy lane 4 selection options
phy: marvell: print comphy status even when it's disconnected
Uwe Kleine-König (1):
arm: mvebu: Minor fixes in the AXP / A38x SERDES code
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-385-amc.dts | 3 +
arch/arm/dts/armada-7040-db-nand.dts | 223 ++++++++++
arch/arm/dts/armada-7040-db.dts | 3 +-
arch/arm/dts/armada-8040-db.dts | 222 +++++-----
arch/arm/dts/armada-8040-mcbin.dts | 14 +-
arch/arm/dts/armada-cp110-master.dtsi | 18 +-
arch/arm/dts/armada-cp110-slave.dtsi | 2 +-
arch/arm/mach-mvebu/arm64-common.c | 6 +
arch/arm/mach-mvebu/armada8k/cpu.c | 18 +
.../serdes/a38x/high_speed_env_spec-38x.c | 2 -
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 4 +-
.../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 6 +-
.../mach-mvebu/serdes/axp/high_speed_env_spec.c | 1 -
cmd/mvebu/bubt.c | 13 +-
configs/db-88f6820-amc_defconfig | 2 +
configs/mvebu_db-88f7040-nand_defconfig | 72 ++++
drivers/mtd/nand/pxa3xx_nand.c | 62 ++-
drivers/net/mvpp2.c | 24 ++
drivers/pci/pcie_dw_mvebu.c | 10 +-
drivers/phy/marvell/comphy.h | 3 +-
drivers/phy/marvell/comphy_core.c | 16 +-
drivers/phy/marvell/comphy_cp110.c | 449 ++++++++++++++++++---
drivers/phy/marvell/comphy_hpipe.h | 277 ++++++++++++-
drivers/phy/marvell/comphy_mux.c | 7 +
include/configs/db-88f6820-amc.h | 7 -
include/configs/mvebu_armada-8k.h | 11 +
include/dt-bindings/comphy/comphy_data.h | 20 +-
28 files changed, 1247 insertions(+), 249 deletions(-)
create mode 100644 arch/arm/dts/armada-7040-db-nand.dts
create mode 100644 configs/mvebu_db-88f7040-nand_defconfig
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-05-09 14:45 Stefan Roese
@ 2017-05-09 23:49 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-05-09 23:49 UTC (permalink / raw)
To: u-boot
On Tue, May 09, 2017 at 04:45:55PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the first batch of Marvell related patches
> in this merge window.
>
> Thanks,
> Stefan
>
> The following changes since commit 2f92629112a1055ed37f8b05dfcf00c3f1875503:
>
> Merge branch 'next' of git://git.denx.de/u-boot-spi (2017-05-08 15:44:52 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to e38f5fc8d80d946b401ba0e9ba0fcb52d6e7e74b:
>
> ARM: mvebu: switch db-88f6820-amc to DM for i2c (2017-05-09 13:38:18 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170509/dd80109b/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-03-29 9:24 Stefan Roese
2017-04-04 20:00 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-03-29 9:24 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the Marvell mvpp2 patches with the ethernet
support for the ARMv8 Armada 7k/8k platforms. The
ethernet patches are all acked by Joe and he is okay with
me pushing them via the Marvell tree.
Thanks,
Stefan
The following changes since commit 1c694102a56895b7aea636f026955cc5d7ee340d:
arc: use timer driver for ARC boards (2017-03-29 07:38:11 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 941f7a4b2606ef468f4f3b763261b758eadee861:
arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig (2017-03-29 07:44:50 +0200)
----------------------------------------------------------------
Stefan Roese (21):
bitops.h: Include bitsperlong.h as needed for GENMASK_ULL
net: mvpp2: Round up top tx buffer boundaries for dcache ops
net: mvpp2: enable building on 64-bit platforms (more U-Boot specific)
net: mvpp2: Add MDIO support for PPv2.2
net: mvpp2: Move probe function from MISC to ETH DM driver
net: mvpp2.c: Clear all buffer / descriptor areas before usage
net: mvpp2: Enable compilation for Armada 7K/8K platforms
arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver
net: mvpp2: Handle eth device naming in multi-CP case correctly
net: mvpp2: Add RX and TX FIFO configuration for PPv2.2
net: include/phy.h: Add new PHY interface modes
net: mvpp2: Restructure probe / init functions
net: mvpp2: Read phy-speed from DT to select between 1GB and 2.5GB SGMII
net: mvpp2: Add GoP and NetC support for ports 2 & 3 (RGMII & SGMII)
net: mvpp2: Add GoP and NetC support for port 0 (SFI)
net: mvpp2: Add missing PHY_INTERFACE_MODE_RGMII_ID
net: mvpp2: Enable PHY polling mode on PPv2.2
net: mvpp2: Configure SMI PHY address needed for PHY polling
net: mvpp2: Remove unreferenced in_use_thresh from struct mvpp2_bm_pool
arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G
arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig
Thomas Petazzoni (23):
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: remove unused register definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: use "dma" instead of "phys" where appropriate
net: mvpp2: remove support for buffer header
net: mvpp2: store physical address of buffer in rx_desc->buf_cookie
net: mvpp2: add and use accessors for TX/RX descriptors
net: mvpp2: add hw_version field in "struct mvpp2"
net: mvpp2: introduce an intermediate union for the TX/RX descriptors
net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors
net: mvpp2: adjust the allocation/free of BM pools for PPv2.2
net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2
net: mvpp2: adapt mvpp2_defaults_set() to PPv2.2
net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2
net: mvpp2: handle register mapping and access for PPv2.2
net: mvpp2: handle misc PPv2.1/PPv2.2 differences
net: mvpp2: add AXI bridge initialization for PPv2.2
net: mvpp2: rework RXQ interrupt group initialization for PPv2.2
net: mvpp2: adapt rxq distribution to PPv2.2
net: mvpp2: finally add the PPv2.2 compatible string
arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
arch/arm/dts/armada-7040-db.dts | 27 +-
arch/arm/dts/armada-8040-db.dts | 16 +
arch/arm/dts/armada-cp110-master.dtsi | 37 +
arch/arm/dts/armada-cp110-slave.dtsi | 37 +
configs/mvebu_db-88f7040_defconfig | 3 +-
configs/mvebu_db-88f8040_defconfig | 3 +-
drivers/net/Kconfig | 6 +-
drivers/net/mvpp2.c | 2059 +++++++++++++++++++++++++++------
include/configs/mvebu_armada-8k.h | 8 +
include/linux/bitops.h | 1 +
include/phy.h | 6 +
11 files changed, 1867 insertions(+), 336 deletions(-)
[stefan at stefan-work u-boot-marvell (master)]$
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-03-29 9:24 Stefan Roese
@ 2017-04-04 20:00 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-04-04 20:00 UTC (permalink / raw)
To: u-boot
On Wed, Mar 29, 2017 at 11:24:23AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the Marvell mvpp2 patches with the ethernet
> support for the ARMv8 Armada 7k/8k platforms. The
> ethernet patches are all acked by Joe and he is okay with
> me pushing them via the Marvell tree.
>
> Thanks,
> Stefan
>
> The following changes since commit 1c694102a56895b7aea636f026955cc5d7ee340d:
>
> arc: use timer driver for ARC boards (2017-03-29 07:38:11 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 941f7a4b2606ef468f4f3b763261b758eadee861:
>
> arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig (2017-03-29 07:44:50 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/147a77ab/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-03-24 5:58 Stefan Roese
2017-03-24 17:36 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-03-24 5:58 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following Marvell patches mainly adding
support for some new boards, like the ARMv8 community
boards MACCHIATOBin and ESPRESSBin.
Thanks,
Stefan
The following changes since commit 5877d8f398de26617be6f1f57bc30c49e9f90ebb:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-03-21 14:10:15 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 60083261a1b33b492ddb5335c125f1223087068b:
arm: mvebu: Add gdsys ControlCenter-Compact board (2017-03-23 15:48:28 +0100)
----------------------------------------------------------------
Dirk Eibach (1):
arm: mvebu: Add gdsys ControlCenter-Compact board
Konstantin Porotchkin (17):
arm64: mvebu: gpio: Add GPIO nodes to A8K family devices
arm64: mvebu: dts: Add i2c1 pin definitions to CPM
mvebu: pcie: Add support for GPIO reset for PCIe device
arm64: mvebu: Add default configuraton for MACCHIATOBin board
mvebu: usb: xhci: Add VBUS regulator supply to the host driver
arm64: mvebu: Rename the db-88f3720 to armada-37xx platform
arm64: a37xx: Enable Marvell ETH PHY support
arm64: a37xx: Enable bubt command support on A3720-DB
arm64: a37xx: dts: Add pin control nodes to DT
arm64: a37xx: Handle pin controls in early board init
mvebu: neta: Add support for board init function
mvebu: neta: a37xx: Add fixed link support to neta driver
mvebu: a37xx: Add init for ESPRESSBin Topaz switch
arm64: dts: Add device tree for ESPRESSOBin board
arm64: mvebu: Add default config for ESPRESSOBin board
arm64: a37xx: Disable DB configurations on ESPRESSOBin board
arm64: a37xx: Remove DM_I2C_COMPAT from the board config
Rabeeh Khoury (1):
arm64: mvebu: dts: Add DTS file for MACCHIATOBin board
Stefan Roese (3):
arm: mvebu: AXP: Add possiblity to configure PEX detection pulse width
arm: mvebu: theadorable: Add board-specific PEX detection pulse width
arm: mvebu: theadorable: Add 'pcie' test command
mario.six at gdsys.cc (1):
dm: Add callback to modify the device tree
arch/arm/Kconfig | 1 +
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/armada-3720-espressobin.dts | 135 +++++
arch/arm/dts/armada-37xx.dtsi | 14 +
arch/arm/dts/armada-38x-controlcenterdc.dts | 589 +++++++++++++++++++++
arch/arm/dts/armada-7040.dtsi | 1 +
arch/arm/dts/armada-8040-mcbin.dts | 293 ++++++++++
arch/arm/dts/armada-8040.dtsi | 1 +
arch/arm/dts/armada-ap806.dtsi | 8 +
arch/arm/dts/armada-cp110-master.dtsi | 22 +
arch/arm/dts/armada-cp110-slave.dtsi | 18 +
arch/arm/mach-mvebu/Kconfig | 14 +-
.../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 31 ++
.../MAINTAINERS | 4 +-
.../Makefile | 0
board/Marvell/mvebu_armada-37xx/board.c | 258 +++++++++
board/Marvell/mvebu_db-88f3720/board.c | 134 -----
board/gdsys/a38x/.gitignore | 1 +
board/gdsys/a38x/Kconfig | 36 ++
board/gdsys/a38x/MAINTAINERS | 7 +
board/gdsys/a38x/Makefile | 44 ++
board/gdsys/a38x/controlcenterdc.c | 279 ++++++++++
board/gdsys/a38x/dt_helpers.c | 43 ++
board/gdsys/a38x/dt_helpers.h | 16 +
board/gdsys/a38x/hre.c | 516 ++++++++++++++++++
board/gdsys/a38x/hre.h | 38 ++
board/gdsys/a38x/hydra.c | 138 +++++
board/gdsys/a38x/hydra.h | 14 +
board/gdsys/a38x/ihs_phys.c | 355 +++++++++++++
board/gdsys/a38x/ihs_phys.h | 2 +
board/gdsys/a38x/keyprogram.c | 158 ++++++
board/gdsys/a38x/keyprogram.h | 14 +
board/gdsys/a38x/kwbimage.cfg.in | 12 +
board/gdsys/a38x/spl.c | 21 +
board/theadorable/theadorable.c | 48 ++
common/board_f.c | 10 +
configs/controlcenterdc_defconfig | 58 ++
configs/mvebu_db-88f3720_defconfig | 6 +-
configs/mvebu_espressobin-88f3720_defconfig | 66 +++
configs/mvebu_mcbin-88f8040_defconfig | 74 +++
doc/device-tree-bindings/pci/armada8k-pcie.txt | 49 ++
doc/device-tree-bindings/usb/marvell.xhci-usb.txt | 28 +
doc/driver-model/fdt-fixup.txt | 132 +++++
drivers/net/mvneta.c | 125 ++++-
drivers/pci/pcie_dw_mvebu.c | 20 +
drivers/usb/host/Kconfig | 1 +
drivers/usb/host/xhci-mvebu.c | 13 +-
dts/Kconfig | 10 +
include/common.h | 1 +
include/configs/controlcenterdc.h | 228 ++++++++
.../{mvebu_db-88f3720.h => mvebu_armada-37xx.h} | 7 +-
51 files changed, 3922 insertions(+), 176 deletions(-)
create mode 100644 arch/arm/dts/armada-3720-espressobin.dts
create mode 100644 arch/arm/dts/armada-38x-controlcenterdc.dts
create mode 100644 arch/arm/dts/armada-8040-mcbin.dts
rename board/Marvell/{mvebu_db-88f3720 => mvebu_armada-37xx}/MAINTAINERS (58%)
rename board/Marvell/{mvebu_db-88f3720 => mvebu_armada-37xx}/Makefile (100%)
create mode 100644 board/Marvell/mvebu_armada-37xx/board.c
delete mode 100644 board/Marvell/mvebu_db-88f3720/board.c
create mode 100644 board/gdsys/a38x/.gitignore
create mode 100644 board/gdsys/a38x/Kconfig
create mode 100644 board/gdsys/a38x/MAINTAINERS
create mode 100644 board/gdsys/a38x/Makefile
create mode 100644 board/gdsys/a38x/controlcenterdc.c
create mode 100644 board/gdsys/a38x/dt_helpers.c
create mode 100644 board/gdsys/a38x/dt_helpers.h
create mode 100644 board/gdsys/a38x/hre.c
create mode 100644 board/gdsys/a38x/hre.h
create mode 100644 board/gdsys/a38x/hydra.c
create mode 100644 board/gdsys/a38x/hydra.h
create mode 100644 board/gdsys/a38x/ihs_phys.c
create mode 100644 board/gdsys/a38x/ihs_phys.h
create mode 100644 board/gdsys/a38x/keyprogram.c
create mode 100644 board/gdsys/a38x/keyprogram.h
create mode 100644 board/gdsys/a38x/kwbimage.cfg.in
create mode 100644 board/gdsys/a38x/spl.c
create mode 100644 configs/controlcenterdc_defconfig
create mode 100644 configs/mvebu_espressobin-88f3720_defconfig
create mode 100644 configs/mvebu_mcbin-88f8040_defconfig
create mode 100644 doc/device-tree-bindings/pci/armada8k-pcie.txt
create mode 100644 doc/device-tree-bindings/usb/marvell.xhci-usb.txt
create mode 100644 doc/driver-model/fdt-fixup.txt
create mode 100644 include/configs/controlcenterdc.h
rename include/configs/{mvebu_db-88f3720.h => mvebu_armada-37xx.h} (96%)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-03-24 5:58 Stefan Roese
@ 2017-03-24 17:36 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-03-24 17:36 UTC (permalink / raw)
To: u-boot
On Fri, Mar 24, 2017 at 06:58:18AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following Marvell patches mainly adding
> support for some new boards, like the ARMv8 community
> boards MACCHIATOBin and ESPRESSBin.
>
> Thanks,
> Stefan
>
> The following changes since commit 5877d8f398de26617be6f1f57bc30c49e9f90ebb:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mmc (2017-03-21 14:10:15 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 60083261a1b33b492ddb5335c125f1223087068b:
>
> arm: mvebu: Add gdsys ControlCenter-Compact board (2017-03-23 15:48:28 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170324/e8c54d24/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-02-17 11:15 Stefan Roese
2017-02-17 22:56 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-02-17 11:15 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following fixes for MVEBU. Currently, I've not
planned to send anything else for the upcoming release.
Thanks,
Stefan
The following changes since commit 85d0bea153c76f4a3912b5683222885bfd37c769:
Prepare v2017.03-rc2 (2017-02-13 11:47:45 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 93f48779356ced7336a5045299b4920f01d6e599:
tools: kwboot: don't adjust destaddr when patching the image (2017-02-17 10:15:56 +0100)
----------------------------------------------------------------
Chris Packham (1):
tools: kwboot: don't adjust destaddr when patching the image
Mario Six (1):
tools: kwbimage: Fix unchecked return value and fd leak
tools/kwbimage.c | 13 +++++++++++--
tools/kwboot.c | 8 --------
2 files changed, 11 insertions(+), 10 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-02-17 11:15 Stefan Roese
@ 2017-02-17 22:56 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-02-17 22:56 UTC (permalink / raw)
To: u-boot
On Fri, Feb 17, 2017 at 12:15:06PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following fixes for MVEBU. Currently, I've not
> planned to send anything else for the upcoming release.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 85d0bea153c76f4a3912b5683222885bfd37c769:
>
> Prepare v2017.03-rc2 (2017-02-13 11:47:45 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 93f48779356ced7336a5045299b4920f01d6e599:
>
> tools: kwboot: don't adjust destaddr when patching the image (2017-02-17 10:15:56 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170217/9cb5823a/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-02-01 11:46 Stefan Roese
2017-02-01 21:33 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-02-01 11:46 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following patches from the Marvell U-Boot git
repository. Mostly patches from GDSYS (Mario) for the MVEBU
secure boot support which have been posted quite a while
ago. Some patches of this patch series still have some open
issues - thats why I've not included them.
Thanks,
Stefan
The following changes since commit 794c6e2c96c20f8fc62890a5e13cc71ab99a2e57:
Prepare v2017.03-rc1 (2017-01-30 19:05:43 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to a1b6b0a9c1f91756b93e6d804837dc178d79d39e:
arm: mvebu: Implement secure boot (2017-02-01 09:04:18 +0100)
----------------------------------------------------------------
Dirk Eibach (2):
pci: mvebu: Fix Armada 38x support
net: phy: Support Marvell 88E1680
Mario Six (10):
mvebu: Add board_pex_config()
lib: tpm: Add command to flush resources
tools: kwbimage: Fix dest addr
tools: kwbimage: Fix style violations
tools: kwbimage: Fix arithmetic with void pointers
tools: kwbimage: Reduce scope of variables
tools: kwbimage: Remove unused parameter
tools: kwbimage: Factor out add_binary_header_v1
tools: kwbimage: Refactor line parsing and fix error
arm: mvebu: Implement secure boot
Reinhard Pfau (1):
arm: mvebu: spl.c: Remove useless gd declaration
Stefan Roese (1):
phy: comphy_a3700: Change SD/MMC compatible DT node to match the updates
Makefile | 3 +-
arch/arm/mach-mvebu/Kconfig | 35 +
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/efuse.c | 264 +++++++
arch/arm/mach-mvebu/include/mach/cpu.h | 2 +
arch/arm/mach-mvebu/include/mach/efuse.h | 69 ++
arch/arm/mach-mvebu/include/mach/soc.h | 1 +
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 8 +
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h | 2 +
arch/arm/mach-mvebu/spl.c | 2 -
board/gdsys/p1022/controlcenterd-id.c | 9 -
cmd/tpm.c | 70 ++
doc/README.armada-secureboot | 373 ++++++++++
drivers/net/phy/marvell.c | 54 ++
drivers/pci/pci_mvebu.c | 25 +-
drivers/phy/marvell/comphy_a3700.c | 7 +-
drivers/tpm/Kconfig | 6 +
include/tpm.h | 45 ++
lib/tpm.c | 29 +
tools/Makefile | 6 +-
tools/kwbimage.c | 1111 ++++++++++++++++++++++++----
tools/kwbimage.h | 37 +
22 files changed, 1970 insertions(+), 189 deletions(-)
create mode 100644 arch/arm/mach-mvebu/efuse.c
create mode 100644 arch/arm/mach-mvebu/include/mach/efuse.h
create mode 100644 doc/README.armada-secureboot
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-02-01 11:46 Stefan Roese
@ 2017-02-01 21:33 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-02-01 21:33 UTC (permalink / raw)
To: u-boot
On Wed, Feb 01, 2017 at 12:46:28PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following patches from the Marvell U-Boot git
> repository. Mostly patches from GDSYS (Mario) for the MVEBU
> secure boot support which have been posted quite a while
> ago. Some patches of this patch series still have some open
> issues - thats why I've not included them.
>
> Thanks,
> Stefan
>
> The following changes since commit 794c6e2c96c20f8fc62890a5e13cc71ab99a2e57:
>
> Prepare v2017.03-rc1 (2017-01-30 19:05:43 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to a1b6b0a9c1f91756b93e6d804837dc178d79d39e:
>
> arm: mvebu: Implement secure boot (2017-02-01 09:04:18 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170201/afd16847/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2017-01-25 7:46 Stefan Roese
2017-01-27 1:43 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2017-01-25 7:46 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following MVEBU related patches, mostly dealing
with adding support for the Xenon SDHCI driver available on
the A7k/8k SoCs. I've collected the Reviewed-by from Jaehoon
for these mmc patches.
Thanks,
Stefan
The following changes since commit f2b0c007f84e582b7a101bd49db60cc8d75f5de4:
travis-ci: Add swig and libpython-dev to the package list (2017-01-24 10:35:57 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to e559ef1ae80c1bde942ad9c62932de20e2b68cef:
arm64: mvebu: Update bubt command MMC block device access (2017-01-25 07:04:22 +0100)
----------------------------------------------------------------
Konstantin Porotchkin (1):
arm64: mvebu: Update bubt command MMC block device access
Stefan Roese (9):
mmc: sdhci: Clear SDHCI_CLOCK_CONTROL before configuring the new value
mmc: sdhci: Add support for optional controller specific set_ios_post()
mmc: Add Marvell Xenon SDHCI controller driver
arm64: mvebu: Armada 3700: Add SDHCI device tree nodes
arm64: mvebu: Armada 3720-db: Add SDHCI device tree nodes
arm64: mvebu: Enable SDHCI/MMC support for the db-88f3720
arm64: mvebu: Armada 7k/8k: Add SDHCI device tree nodes
arm64: mvebu: Armada 7040-db: Add SDHCI device tree nodes
arm64: mvebu: Enable SDHCI/MMC support for the db-88f7040/8040
arch/arm/dts/armada-3720-db.dts | 21 ++
arch/arm/dts/armada-37xx.dtsi | 16 ++
arch/arm/dts/armada-7040-db.dts | 14 +
arch/arm/dts/armada-ap806.dtsi | 8 +
arch/arm/dts/armada-cp110-master.dtsi | 8 +
cmd/mvebu/bubt.c | 25 +-
configs/mvebu_db-88f3720_defconfig | 6 +-
configs/mvebu_db-88f7040_defconfig | 5 +-
configs/mvebu_db-88f8040_defconfig | 5 +-
drivers/mmc/Kconfig | 11 +
drivers/mmc/Makefile | 1 +
drivers/mmc/sdhci.c | 10 +-
drivers/mmc/xenon_sdhci.c | 497 ++++++++++++++++++++++++++++++++++
include/configs/mvebu_armada-8k.h | 3 +
include/configs/mvebu_db-88f3720.h | 3 +
include/sdhci.h | 1 +
16 files changed, 624 insertions(+), 10 deletions(-)
create mode 100644 drivers/mmc/xenon_sdhci.c
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2017-01-25 7:46 Stefan Roese
@ 2017-01-27 1:43 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2017-01-27 1:43 UTC (permalink / raw)
To: u-boot
On Wed, Jan 25, 2017 at 08:46:23AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following MVEBU related patches, mostly dealing
> with adding support for the Xenon SDHCI driver available on
> the A7k/8k SoCs. I've collected the Reviewed-by from Jaehoon
> for these mmc patches.
>
> Thanks,
> Stefan
>
> The following changes since commit f2b0c007f84e582b7a101bd49db60cc8d75f5de4:
>
> travis-ci: Add swig and libpython-dev to the package list (2017-01-24 10:35:57 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to e559ef1ae80c1bde942ad9c62932de20e2b68cef:
>
> arm64: mvebu: Update bubt command MMC block device access (2017-01-25 07:04:22 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170126/28a88596/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-12-21 9:56 Stefan Roese
2016-12-21 13:06 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-12-21 9:56 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following A7k/8k fix.
Thanks,
Stefan
The following changes since commit 0bd1f96aa2f18d29e8321e519b0152853e500d4d:
Merge git://git.denx.de/u-boot-mpc85xx (2016-12-20 12:20:12 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 0d92f2141ac5ef5c80d13e9501890f914525d43c:
arm64: mvebu: Fix A8K memory mapping and add documentation (2016-12-21 09:52:35 +0100)
----------------------------------------------------------------
Konstantin Porotchkin (1):
arm64: mvebu: Fix A8K memory mapping and add documentation
arch/arm/mach-mvebu/armada8k/cpu.c | 58 +++++++++++++++++++++++++++++---------
doc/mvebu/armada-8k-memory.txt | 56 ++++++++++++++++++++++++++++++++++++
2 files changed, 101 insertions(+), 13 deletions(-)
create mode 100644 doc/mvebu/armada-8k-memory.txt
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-12-21 9:56 Stefan Roese
@ 2016-12-21 13:06 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-12-21 13:06 UTC (permalink / raw)
To: u-boot
On Wed, Dec 21, 2016 at 10:56:58AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following A7k/8k fix.
>
> Thanks,
> Stefan
>
> The following changes since commit 0bd1f96aa2f18d29e8321e519b0152853e500d4d:
>
> Merge git://git.denx.de/u-boot-mpc85xx (2016-12-20 12:20:12 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 0d92f2141ac5ef5c80d13e9501890f914525d43c:
>
> arm64: mvebu: Fix A8K memory mapping and add documentation (2016-12-21 09:52:35 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161221/60c71ad6/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-12-12 10:47 Stefan Roese
2016-12-12 15:56 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-12-12 10:47 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the patches from Kosta, fixing Linux booting for
Armada 7k/8k and introducing the pinctrl driver for this
platform.
Thanks,
Stefan
The following changes since commit 361a879902a3cbdb692149a1ac580e3199e771ba:
Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze" (2016-12-09 07:56:54 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to a20b7a2a53d3ac668d1ed25b06cd6d15ca41f2a9:
arm64: mvebu: Enable hush parser in A8K default configuration (2016-12-12 09:05:45 +0100)
----------------------------------------------------------------
Konstantin Porotchkin (9):
arm64: mvebu: Modify the A8K SPI and I2C config in DTS
arm64: mvebu: Add bubt command for flash image burn
arm64: mvebu: pinctrl: Add pin control driver for A8K family
arm64: mvebu: Add pin control nodes to A8K family DTS files
arm64: mvebu: Enable BUBT command support in A8K default config
arm64: mvebu: Enable pin control support in A8K default config
arm64: mvebu: Add L3 cache flush functionality to A8K family
arm64: mvebu: Enable PCIe support in Armada-7040 configuration
arm64: mvebu: Enable hush parser in A8K default configuration
arch/arm/dts/armada-7040-db.dts | 64 +-
arch/arm/dts/armada-8040-db.dts | 114 ++-
arch/arm/dts/armada-ap806.dtsi | 18 +
arch/arm/dts/armada-cp110-master.dtsi | 32 +
arch/arm/dts/armada-cp110-slave.dtsi | 19 +
arch/arm/include/asm/arch-armada8k/cache_llc.h | 21 +
arch/arm/include/asm/arch-armada8k/soc-info.h | 17 +
arch/arm/mach-mvebu/armada8k/Makefile | 1 +
arch/arm/mach-mvebu/armada8k/cache_llc.S | 39 ++
cmd/Kconfig | 3 +
cmd/Makefile | 2 +
cmd/mvebu/Kconfig | 52 ++
cmd/mvebu/Makefile | 8 +
cmd/mvebu/bubt.c | 767 +++++++++++++++++++++
configs/mvebu_db-88f7040_defconfig | 6 +
configs/mvebu_db-88f8040_defconfig | 3 +
.../pinctrl/marvell,armada-apn806-pinctrl.txt | 25 +
.../pinctrl/marvell,armada-cp110-pinctrl.txt | 270 ++++++++
.../pinctrl/marvell,mvebu-pinctrl.txt | 113 +++
doc/mvebu/cmd/bubt.txt | 64 ++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/mvebu/Kconfig | 7 +
drivers/pinctrl/mvebu/Makefile | 7 +
drivers/pinctrl/mvebu/pinctrl-mvebu.c | 179 +++++
drivers/pinctrl/mvebu/pinctrl-mvebu.h | 31 +
26 files changed, 1800 insertions(+), 64 deletions(-)
create mode 100644 arch/arm/include/asm/arch-armada8k/cache_llc.h
create mode 100644 arch/arm/include/asm/arch-armada8k/soc-info.h
create mode 100644 arch/arm/mach-mvebu/armada8k/cache_llc.S
create mode 100644 cmd/mvebu/Kconfig
create mode 100644 cmd/mvebu/Makefile
create mode 100644 cmd/mvebu/bubt.c
create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-apn806-pinctrl.txt
create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-cp110-pinctrl.txt
create mode 100644 doc/device-tree-bindings/pinctrl/marvell,mvebu-pinctrl.txt
create mode 100644 doc/mvebu/cmd/bubt.txt
create mode 100644 drivers/pinctrl/mvebu/Kconfig
create mode 100644 drivers/pinctrl/mvebu/Makefile
create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.c
create mode 100644 drivers/pinctrl/mvebu/pinctrl-mvebu.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-12-12 10:47 Stefan Roese
@ 2016-12-12 15:56 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-12-12 15:56 UTC (permalink / raw)
To: u-boot
On Mon, Dec 12, 2016 at 11:47:45AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the patches from Kosta, fixing Linux booting for
> Armada 7k/8k and introducing the pinctrl driver for this
> platform.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 361a879902a3cbdb692149a1ac580e3199e771ba:
>
> Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze" (2016-12-09 07:56:54 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to a20b7a2a53d3ac668d1ed25b06cd6d15ca41f2a9:
>
> arm64: mvebu: Enable hush parser in A8K default configuration (2016-12-12 09:05:45 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161212/18b7a5a0/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-12-05 13:01 Stefan Roese
2016-12-05 16:01 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-12-05 13:01 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following patches introducing the basic Armada-8k
support for MVEBU. If things go smooth I plan to push the
additional patches from Kosta for A7/8k in a few days.
Thanks,
Stefan
The following changes since commit 194eded14ccb40af18e1a9fb8ab85903ee0803ef:
Merge git://git.denx.de/u-boot-mpc85xx (2016-12-04 13:55:15 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 5102af4d2f53ec8d76ce60d103c65ae062b9c8fe:
sata: sata_mv: Fix misaligned cache warnings (2016-12-05 13:53:42 +0100)
----------------------------------------------------------------
Shadi Ammouri (1):
pci: mvebu: Add PCIe driver for Armada-8K
Stefan Roese (15):
arm64: mvebu: Rename db-88f7040 files to armada-8k
arm64: mvebu: Add Armada-80x0 dts/dtsi files
arm64: mvebu: armada-8k: Only configure xHCI power on DB-88F7040 board
arm64: mvebu: Add slave CP area to the memory map
arm64: mvebu: Add support for the DB-88F8040 Armada 8k devel board
arm64: mvebu: armada-cp110-master.dtsi: Rename comphy DT node names
arm64: mvebu: armada-cp110-slave.dtsi: Add COMPHY / UTMI device tree nodes
arm64: mvebu: armada-8040-db.dts: Add COMPHY configuration
arm64: mvebu: armada-8040-db.dts: Add I2C and SPI aliases
arm64: mvebu: Init COMPHY from the slave-CP on the A8k
drivers/phy: marvell: Add support for the slave CP COMPHY device
arm64: mvebu: Add regions for PCI spaces to the memory map
arm64: mvebu: Add PCI support to DB-88F8040 board
arm64: mvebu: Restrict memory size to a usable maximum
sata: sata_mv: Fix misaligned cache warnings
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-7040-db.dts | 6 +-
arch/arm/dts/armada-8020.dtsi | 56 +++
arch/arm/dts/armada-8040-db.dts | 239 +++++++++
arch/arm/dts/armada-8040.dtsi | 56 +++
arch/arm/dts/armada-cp110-master.dtsi | 6 +-
arch/arm/dts/armada-cp110-slave.dtsi | 268 +++++++++++
arch/arm/mach-mvebu/Kconfig | 10 +-
arch/arm/mach-mvebu/arm64-common.c | 37 +-
arch/arm/mach-mvebu/armada8k/cpu.c | 18 +-
board/Marvell/mvebu_armada-8k/MAINTAINERS | 7 +
.../{mvebu_db-88f7040 => mvebu_armada-8k}/Makefile | 0
board/Marvell/mvebu_armada-8k/board.c | 162 +++++++
board/Marvell/mvebu_db-88f7040/MAINTAINERS | 6 -
board/Marvell/mvebu_db-88f7040/board.c | 152 ------
configs/mvebu_db-88f7040_defconfig | 4 +-
configs/mvebu_db-88f8040_defconfig | 55 +++
drivers/block/sata_mv.c | 12 +-
drivers/pci/Kconfig | 10 +
drivers/pci/Makefile | 1 +
drivers/pci/pcie_dw_mvebu.c | 535 +++++++++++++++++++++
drivers/phy/marvell/comphy.h | 2 +-
drivers/phy/marvell/comphy_core.c | 15 +-
.../{mvebu_db-88f7040.h => mvebu_armada-8k.h} | 14 +-
24 files changed, 1486 insertions(+), 186 deletions(-)
create mode 100644 arch/arm/dts/armada-8020.dtsi
create mode 100644 arch/arm/dts/armada-8040-db.dts
create mode 100644 arch/arm/dts/armada-8040.dtsi
create mode 100644 arch/arm/dts/armada-cp110-slave.dtsi
create mode 100644 board/Marvell/mvebu_armada-8k/MAINTAINERS
rename board/Marvell/{mvebu_db-88f7040 => mvebu_armada-8k}/Makefile (100%)
create mode 100644 board/Marvell/mvebu_armada-8k/board.c
delete mode 100644 board/Marvell/mvebu_db-88f7040/MAINTAINERS
delete mode 100644 board/Marvell/mvebu_db-88f7040/board.c
create mode 100644 configs/mvebu_db-88f8040_defconfig
create mode 100644 drivers/pci/pcie_dw_mvebu.c
rename include/configs/{mvebu_db-88f7040.h => mvebu_armada-8k.h} (94%)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-12-05 13:01 Stefan Roese
@ 2016-12-05 16:01 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-12-05 16:01 UTC (permalink / raw)
To: u-boot
On Mon, Dec 05, 2016 at 02:01:08PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following patches introducing the basic Armada-8k
> support for MVEBU. If things go smooth I plan to push the
> additional patches from Kosta for A7/8k in a few days.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 194eded14ccb40af18e1a9fb8ab85903ee0803ef:
>
> Merge git://git.denx.de/u-boot-mpc85xx (2016-12-04 13:55:15 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 5102af4d2f53ec8d76ce60d103c65ae062b9c8fe:
>
> sata: sata_mv: Fix misaligned cache warnings (2016-12-05 13:53:42 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161205/d763ff78/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-12-01 12:57 Stefan Roese
2016-12-01 18:16 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-12-01 12:57 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the first batch of mvebu / Marvell patches in this
merge window. I plan to send additional pull requests once some
of the other patches are clear.
Thanks,
Stefan
The following changes since commit 38c4f0bdce5bca8535eadab08ece80dff45ad0ee:
ts4600: Disable CONFIG_DISPLAY_CPUINFO (2016-11-30 19:31:18 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 2611c05e840033e4c4ab83115836d7657f5b316b:
tools/kwbimage: add DEBUG option (2016-12-01 09:10:49 +0100)
----------------------------------------------------------------
Chris Packham (4):
mvebu: db-88f6820-amc: Enable FIT support
arm: mvebu: move SYS_MVEBU_PLL_CLOCK to Kconfig
tools/kwbimage: add BAUDRATE option
tools/kwbimage: add DEBUG option
arch/arm/mach-mvebu/Kconfig | 6 +++++
arch/arm/mach-mvebu/include/mach/soc.h | 3 ---
configs/db-88f6820-amc_defconfig | 2 ++
tools/kwbimage.c | 40 ++++++++++++++++++++++++++++++++++
tools/kwbimage.h | 16 ++++++++++++--
5 files changed, 62 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-12-01 12:57 Stefan Roese
@ 2016-12-01 18:16 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-12-01 18:16 UTC (permalink / raw)
To: u-boot
On Thu, Dec 01, 2016 at 01:57:55PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the first batch of mvebu / Marvell patches in this
> merge window. I plan to send additional pull requests once some
> of the other patches are clear.
>
> Thanks,
> Stefan
>
> The following changes since commit 38c4f0bdce5bca8535eadab08ece80dff45ad0ee:
>
> ts4600: Disable CONFIG_DISPLAY_CPUINFO (2016-11-30 19:31:18 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 2611c05e840033e4c4ab83115836d7657f5b316b:
>
> tools/kwbimage: add DEBUG option (2016-12-01 09:10:49 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161201/9c68db8c/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-10-09 9:05 Stefan Roese
2016-10-13 0:48 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-10-09 9:05 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the DS109 board support. Its an updated version - the
original patches have been sent to the list quite some time ago.
Thanks,
Stefan
The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08 09:33:37 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 1c653201d7de10b486266317200bfaa8bdb57700:
arm: kirkwood: fix Synology board tag (2016-10-09 10:55:32 +0200)
----------------------------------------------------------------
Walter Schweizer (5):
arm: kirkwood: add support for Synology DS109 board
arm: kirkwood: ds109 board is maintained
arm: kirkwood: fix kirkwood initial setup
arm: kirkwood: fix output enable settings
arm: kirkwood: fix Synology board tag
arch/arm/mach-kirkwood/Kconfig | 4 +
board/Synology/ds109/Kconfig | 12 +++
board/Synology/ds109/MAINTAINERS | 6 ++
board/Synology/ds109/Makefile | 9 ++
board/Synology/ds109/ds109.c | 176 ++++++++++++++++++++++++++++++++++++++
board/Synology/ds109/ds109.h | 44 ++++++++++
board/Synology/ds109/kwbimage.cfg | 152 ++++++++++++++++++++++++++++++++
board/Synology/ds109/openocd.cfg | 115 +++++++++++++++++++++++++
configs/ds109_defconfig | 16 ++++
include/configs/ds109.h | 103 ++++++++++++++++++++++
10 files changed, 637 insertions(+)
create mode 100644 board/Synology/ds109/Kconfig
create mode 100644 board/Synology/ds109/MAINTAINERS
create mode 100644 board/Synology/ds109/Makefile
create mode 100644 board/Synology/ds109/ds109.c
create mode 100644 board/Synology/ds109/ds109.h
create mode 100644 board/Synology/ds109/kwbimage.cfg
create mode 100644 board/Synology/ds109/openocd.cfg
create mode 100644 configs/ds109_defconfig
create mode 100644 include/configs/ds109.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-10-09 9:05 Stefan Roese
@ 2016-10-13 0:48 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-10-13 0:48 UTC (permalink / raw)
To: u-boot
On Sun, Oct 09, 2016 at 11:05:10AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the DS109 board support. Its an updated version - the
> original patches have been sent to the list quite some time ago.
>
> Thanks,
> Stefan
>
> The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08 09:33:37 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 1c653201d7de10b486266317200bfaa8bdb57700:
>
> arm: kirkwood: fix Synology board tag (2016-10-09 10:55:32 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161012/cfc750bc/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-09-27 15:33 Stefan Roese
2016-09-27 21:32 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-09-27 15:33 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the 2nd batch of Marvell MVEBU related patches. This
time the new ARM64 Armada 37xx and Armada 7k/8k support.
Thanks,
Stefan
The following changes since commit cbe7706ab8aab06c18edaa9b120371f9c8012728:
Merge git://git.denx.de/u-boot-fsl-qoriq (2016-09-26 17:10:56 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to b28d29f784f5cc33c92e291d35eda603ea4e58e3:
arm64: mvebu: armada-7040-db.dts: Add I2C and SPI aliases (2016-09-27 17:29:54 +0200)
----------------------------------------------------------------
Stefan Roese (25):
net: mvneta: Round up top tx buffer boundaries for dcache ops
serial: Add serial_mvebu_a3700 for Armada 3700 SoC
spi: Add driver for Marvell Armada 3700 SoC
net: mvneta: Make driver 64bit safe
net: mvneta: Add support for Armada 3700 SoC
usb: xhci: Add Marvell MVEBU xHCI support
usb: ehci: ehci-marvell.c: Add Armada 3700 support (ARMv8)
drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k
arm64: mvebu: Armada 3700: Add Armada 37xx dts files
arm64: mvebu: Armada 3700: Add SPI device tree nodes
arm64: mvebu: Armada 3700: Add ethernet device tree nodes
arm64: mvebu: Armada 3700: Add I2C device tree nodes
arm64: mvebu: Armada 3700: Add COMPHY device tree nodes
arm64: mvebu: Armada 3700: Add USB device tree nodes
arm64: mvebu: Add support for the Marvell Armada 3700 SoC
arm64: mvebu: Add Armada 3700 db-88f3720 development board support
drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K
usb: xhci-mvebu: Add Armada 8K to compatiblity list
ahci: Make ahci_port_base() non-static to enable overwrite
arm64: mvebu: Armada 7K/8K: Add Armada 7K/8K dts files
arm64: mvebu: Add basic support for the Marvell Armada 7K/8K SoC
arm64: mvebu: Add Armada 7K db-88f7040 development board support
arm64: mvebu: armada-ap806.dtsi: Add clock-frequency to UART DT node
arm64: mvebu: Armada 7K/8K: Add COMPHY device tree nodes
arm64: mvebu: armada-7040-db.dts: Add I2C and SPI aliases
arch/arm/Kconfig | 8 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/armada-371x.dtsi | 53 +
arch/arm/dts/armada-3720-db.dts | 123 ++
arch/arm/dts/armada-372x.dtsi | 62 +
arch/arm/dts/armada-37xx.dtsi | 189 +++
arch/arm/dts/armada-7040-db.dts | 193 ++++
arch/arm/dts/armada-7040.dtsi | 55 +
arch/arm/dts/armada-ap806-quad.dtsi | 82 ++
arch/arm/dts/armada-ap806.dtsi | 230 ++++
arch/arm/dts/armada-cp110-master.dtsi | 256 +++++
arch/arm/mach-mvebu/Kconfig | 44 +-
arch/arm/mach-mvebu/Makefile | 18 +-
arch/arm/mach-mvebu/arm64-common.c | 124 ++
arch/arm/mach-mvebu/armada3700/Makefile | 7 +
arch/arm/mach-mvebu/armada3700/cpu.c | 81 ++
arch/arm/mach-mvebu/armada8k/Makefile | 7 +
arch/arm/mach-mvebu/armada8k/cpu.c | 64 ++
arch/arm/mach-mvebu/include/mach/cpu.h | 7 +
arch/arm/mach-mvebu/include/mach/soc.h | 4 +-
arch/arm/mach-mvebu/sata.c | 54 +
board/Marvell/mvebu_db-88f3720/MAINTAINERS | 6 +
board/Marvell/mvebu_db-88f3720/Makefile | 7 +
board/Marvell/mvebu_db-88f3720/board.c | 134 +++
board/Marvell/mvebu_db-88f7040/MAINTAINERS | 6 +
board/Marvell/mvebu_db-88f7040/Makefile | 7 +
board/Marvell/mvebu_db-88f7040/board.c | 152 +++
configs/mvebu_db-88f3720_defconfig | 49 +
configs/mvebu_db-88f7040_defconfig | 47 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/block/ahci.c | 2 +-
drivers/net/mvneta.c | 51 +-
drivers/phy/marvell/Kconfig | 9 +
drivers/phy/marvell/Makefile | 8 +
drivers/phy/marvell/comphy.h | 153 +++
drivers/phy/marvell/comphy_a3700.c | 962 ++++++++++++++++
drivers/phy/marvell/comphy_a3700.h | 275 +++++
drivers/phy/marvell/comphy_core.c | 200 ++++
drivers/phy/marvell/comphy_cp110.c | 1726 ++++++++++++++++++++++++++++
drivers/phy/marvell/comphy_hpipe.h | 420 +++++++
drivers/phy/marvell/comphy_mux.c | 118 ++
drivers/phy/marvell/sata.h | 30 +
drivers/phy/marvell/utmi_phy.h | 90 ++
drivers/serial/Kconfig | 15 +
drivers/serial/Makefile | 1 +
drivers/serial/serial_mvebu_a3700.c | 175 +++
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/mvebu_a3700_spi.c | 295 +++++
drivers/usb/host/Kconfig | 9 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-marvell.c | 59 +-
drivers/usb/host/xhci-mvebu.c | 97 ++
include/configs/mvebu_db-88f3720.h | 144 +++
include/configs/mvebu_db-88f7040.h | 133 +++
include/dt-bindings/comphy/comphy_data.h | 61 +
57 files changed, 7087 insertions(+), 29 deletions(-)
create mode 100644 arch/arm/dts/armada-371x.dtsi
create mode 100644 arch/arm/dts/armada-3720-db.dts
create mode 100644 arch/arm/dts/armada-372x.dtsi
create mode 100644 arch/arm/dts/armada-37xx.dtsi
create mode 100644 arch/arm/dts/armada-7040-db.dts
create mode 100644 arch/arm/dts/armada-7040.dtsi
create mode 100644 arch/arm/dts/armada-ap806-quad.dtsi
create mode 100644 arch/arm/dts/armada-ap806.dtsi
create mode 100644 arch/arm/dts/armada-cp110-master.dtsi
create mode 100644 arch/arm/mach-mvebu/arm64-common.c
create mode 100644 arch/arm/mach-mvebu/armada3700/Makefile
create mode 100644 arch/arm/mach-mvebu/armada3700/cpu.c
create mode 100644 arch/arm/mach-mvebu/armada8k/Makefile
create mode 100644 arch/arm/mach-mvebu/armada8k/cpu.c
create mode 100644 arch/arm/mach-mvebu/sata.c
create mode 100644 board/Marvell/mvebu_db-88f3720/MAINTAINERS
create mode 100644 board/Marvell/mvebu_db-88f3720/Makefile
create mode 100644 board/Marvell/mvebu_db-88f3720/board.c
create mode 100644 board/Marvell/mvebu_db-88f7040/MAINTAINERS
create mode 100644 board/Marvell/mvebu_db-88f7040/Makefile
create mode 100644 board/Marvell/mvebu_db-88f7040/board.c
create mode 100644 configs/mvebu_db-88f3720_defconfig
create mode 100644 configs/mvebu_db-88f7040_defconfig
create mode 100644 drivers/phy/marvell/Kconfig
create mode 100644 drivers/phy/marvell/Makefile
create mode 100644 drivers/phy/marvell/comphy.h
create mode 100644 drivers/phy/marvell/comphy_a3700.c
create mode 100644 drivers/phy/marvell/comphy_a3700.h
create mode 100644 drivers/phy/marvell/comphy_core.c
create mode 100644 drivers/phy/marvell/comphy_cp110.c
create mode 100644 drivers/phy/marvell/comphy_hpipe.h
create mode 100644 drivers/phy/marvell/comphy_mux.c
create mode 100644 drivers/phy/marvell/sata.h
create mode 100644 drivers/phy/marvell/utmi_phy.h
create mode 100644 drivers/serial/serial_mvebu_a3700.c
create mode 100644 drivers/spi/mvebu_a3700_spi.c
create mode 100644 drivers/usb/host/xhci-mvebu.c
create mode 100644 include/configs/mvebu_db-88f3720.h
create mode 100644 include/configs/mvebu_db-88f7040.h
create mode 100644 include/dt-bindings/comphy/comphy_data.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-09-27 15:33 Stefan Roese
@ 2016-09-27 21:32 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-09-27 21:32 UTC (permalink / raw)
To: u-boot
On Tue, Sep 27, 2016 at 05:33:20PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the 2nd batch of Marvell MVEBU related patches. This
> time the new ARM64 Armada 37xx and Armada 7k/8k support.
>
> Thanks,
> Stefan
>
>
> The following changes since commit cbe7706ab8aab06c18edaa9b120371f9c8012728:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2016-09-26 17:10:56 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to b28d29f784f5cc33c92e291d35eda603ea4e58e3:
>
> arm64: mvebu: armada-7040-db.dts: Add I2C and SPI aliases (2016-09-27 17:29:54 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160927/c5a1e554/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-09-24 8:13 Stefan Roese
2016-09-24 16:04 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-09-24 8:13 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the first batch of Marvell / MVEBU patches in this
merge window.
Thanks,
Stefan
The following changes since commit 8824cfc19a6e4ae23ca8006bb22b7b6f839b09a8:
usb: ehci-generic: support reset control for generic EHCI (2016-09-23 22:25:44 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 42f75050667bf1a0a3fbe7d8dd6d2ec5fc127935:
arm: mvebu: NAND support for DB-88F6820-AMC (2016-09-24 10:07:48 +0200)
----------------------------------------------------------------
Chris Packham (3):
arm: mvebu: create generic 88F6820 config option
arm: mvebu: add DB-88F6820-AMC board
arm: mvebu: NAND support for DB-88F6820-AMC
Stefan Roese (1):
arm: mvebu: theadorable: Configure board for PCIe 2.0 capability
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-385-amc.dts | 163 ++++++++++++++++++++++++++
arch/arm/mach-mvebu/Kconfig | 13 +-
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 2 +-
board/Marvell/db-88f6820-amc/MAINTAINERS | 6 +
board/Marvell/db-88f6820-amc/Makefile | 7 ++
board/Marvell/db-88f6820-amc/db-88f6820-amc.c | 129 ++++++++++++++++++++
board/Marvell/db-88f6820-amc/kwbimage.cfg | 12 ++
board/theadorable/theadorable.c | 6 +
configs/db-88f6820-amc_defconfig | 45 +++++++
include/configs/db-88f6820-amc.h | 127 ++++++++++++++++++++
11 files changed, 507 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/armada-385-amc.dts
create mode 100644 board/Marvell/db-88f6820-amc/MAINTAINERS
create mode 100644 board/Marvell/db-88f6820-amc/Makefile
create mode 100644 board/Marvell/db-88f6820-amc/db-88f6820-amc.c
create mode 100644 board/Marvell/db-88f6820-amc/kwbimage.cfg
create mode 100644 configs/db-88f6820-amc_defconfig
create mode 100644 include/configs/db-88f6820-amc.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-09-24 8:13 Stefan Roese
@ 2016-09-24 16:04 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-09-24 16:04 UTC (permalink / raw)
To: u-boot
On Sat, Sep 24, 2016 at 10:13:43AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the first batch of Marvell / MVEBU patches in this
> merge window.
>
> Thanks,
> Stefan
>
> The following changes since commit 8824cfc19a6e4ae23ca8006bb22b7b6f839b09a8:
>
> usb: ehci-generic: support reset control for generic EHCI (2016-09-23 22:25:44 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 42f75050667bf1a0a3fbe7d8dd6d2ec5fc127935:
>
> arm: mvebu: NAND support for DB-88F6820-AMC (2016-09-24 10:07:48 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160924/a3265912/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-08-26 6:46 Stefan Roese
2016-08-26 14:52 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-08-26 6:46 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following MVEBU related patches, mostly small fixes.
Thank!
The following changes since commit 46fe9eb08812cc27a0d5cd97d97373c14d578fe9:
Merge branch 'master' of git://git.denx.de/u-boot-net (2016-08-23 07:20:36 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to bdf58c73ca406e31be49ad875969b2f9aacb9b65:
tools: kwboot: patch destaddr only for SoCs with header version 1 (2016-08-26 08:42:50 +0200)
----------------------------------------------------------------
Chris Packham (4):
arm: mvebu: Add support for NAND interface on A-38x
spl: Remove unused CONFIG_SPL_SPI_* definitions
arm: mvebu: a38x: update serdes error handling
arm: mvebu: a38x: typo fix cpabilities -> capbilities
Simon Baatz (1):
tools: kwboot: patch destaddr only for SoCs with header version 1
arch/arm/mach-mvebu/cpu.c | 9 ++++-
arch/arm/mach-mvebu/include/mach/soc.h | 2 ++
arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c | 2 +-
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 39 +++++++++++-----------
include/configs/clearfog.h | 2 --
include/configs/db-88f6720.h | 2 --
include/configs/db-88f6820-gp.h | 2 --
include/configs/db-mv784mp-gp.h | 2 --
include/configs/ds414.h | 2 --
include/configs/maxbcm.h | 2 --
include/configs/theadorable.h | 2 --
tools/kwboot.c | 16 ++++-----
12 files changed, 39 insertions(+), 43 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-08-26 6:46 Stefan Roese
@ 2016-08-26 14:52 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-08-26 14:52 UTC (permalink / raw)
To: u-boot
On Fri, Aug 26, 2016 at 08:46:44AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following MVEBU related patches, mostly small fixes.
>
> Thank!
>
> The following changes since commit 46fe9eb08812cc27a0d5cd97d97373c14d578fe9:
>
> Merge branch 'master' of git://git.denx.de/u-boot-net (2016-08-23 07:20:36 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to bdf58c73ca406e31be49ad875969b2f9aacb9b65:
>
> tools: kwboot: patch destaddr only for SoCs with header version 1 (2016-08-26 08:42:50 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160826/d8eddda6/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-05-31 6:08 Stefan Roese
2016-05-31 14:50 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-05-31 6:08 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following patches from the Marvell git repository.
I've included 2 SPEAr patches there since we don't have a SPEAr
git repository. I hope this okay.
Thanks,
Stefan
The following changes since commit e4a94ce4ac77396b181663c0493c50bc2d5b9143:
Merge git://git.denx.de/u-boot-dm (2016-05-27 20:34:12 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to e084fd922f7483d591c623823452fff7879c9d71:
arm: spear: x600: Remove EFI support to reduce image size (2016-05-31 07:48:40 +0200)
----------------------------------------------------------------
Peter Robinson (1):
clearfog: add HUSH parser
Stefan Roese (2):
arm: spear: x600: Add support for Micrel KSZ9031 PHY
arm: spear: x600: Remove EFI support to reduce image size
board/spear/x600/x600.c | 80 ++++++++++++++++++++++++++++++++++------------
configs/clearfog_defconfig | 1 +
configs/x600_defconfig | 1 +
include/configs/x600.h | 2 ++
4 files changed, 63 insertions(+), 21 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-05-31 6:08 Stefan Roese
@ 2016-05-31 14:50 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-05-31 14:50 UTC (permalink / raw)
To: u-boot
On Tue, May 31, 2016 at 08:08:44AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following patches from the Marvell git repository.
> I've included 2 SPEAr patches there since we don't have a SPEAr
> git repository. I hope this okay.
>
> Thanks,
> Stefan
>
> The following changes since commit e4a94ce4ac77396b181663c0493c50bc2d5b9143:
>
> Merge git://git.denx.de/u-boot-dm (2016-05-27 20:34:12 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to e084fd922f7483d591c623823452fff7879c9d71:
>
> arm: spear: x600: Remove EFI support to reduce image size (2016-05-31 07:48:40 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160531/bc81ffdd/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-05-20 9:10 Stefan Roese
2016-05-23 22:12 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-05-20 9:10 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull those 2 patches.
Thanks,
Stefan
The following changes since commit 4b6e1fda107e5244e80ebc41865650ac2873dc88:
Merge git://git.denx.de/u-boot-dm (2016-05-17 13:58:27 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to fbaf42724f372ee3fb0d7cd83107f5bae416028f:
arm: mvebu: theadorable: Enable CONFIG_ZERO_BOOTDELAY_CHECK (2016-05-20 11:08:16 +0200)
----------------------------------------------------------------
Marek Vasut (1):
arm: mvebu: a38x: Weed out floating point use
Stefan Roese (1):
arm: mvebu: theadorable: Enable CONFIG_ZERO_BOOTDELAY_CHECK
drivers/ddr/marvell/a38x/ddr3_init.c | 29 ++++++++++-------------------
include/configs/theadorable.h | 1 +
2 files changed, 11 insertions(+), 19 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-05-20 9:10 Stefan Roese
@ 2016-05-23 22:12 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-05-23 22:12 UTC (permalink / raw)
To: u-boot
On Fri, May 20, 2016 at 11:10:39AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull those 2 patches.
>
> Thanks,
> Stefan
>
> The following changes since commit 4b6e1fda107e5244e80ebc41865650ac2873dc88:
>
> Merge git://git.denx.de/u-boot-dm (2016-05-17 13:58:27 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to fbaf42724f372ee3fb0d7cd83107f5bae416028f:
>
> arm: mvebu: theadorable: Enable CONFIG_ZERO_BOOTDELAY_CHECK (2016-05-20 11:08:16 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160523/3ee87312/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-04-12 9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
0 siblings, 2 replies; 130+ messages in thread
From: Stefan Roese @ 2016-04-12 9:19 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following small fixes and board-specific
changes:
The following changes since commit bbf8bef196ae52517284a0a2e2ffc94a4ff89f5f:
Prepare v2016.05-rc1 (2016-04-11 22:22:25 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to aca84a214d70953505d56b7c9717d1a7c019902c:
arm: mvebu: theadorable: Remove Board name output in checkboard (2016-04-12 11:13:40 +0200)
----------------------------------------------------------------
Stefan Roese (7):
gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()
arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register
arm: mvebu: theadorable: Add bootcounter support
arm: mvebu: Add base address for 2nd I2C controller
arm: mvebu: theadorable: Enable 2nd I2C controller
arm: mvebu: theadorable: Add PEX-switch detection and reset code
arm: mvebu: theadorable: Remove Board name output in checkboard
arch/arm/mach-mvebu/include/mach/soc.h | 1 +
board/theadorable/theadorable.c | 103 ++++++++++++++++++++++++++++++++-
drivers/gpio/mvebu_gpio.c | 4 ++
include/configs/theadorable.h | 10 ++++
4 files changed, 116 insertions(+), 2 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-04-12 9:19 Stefan Roese
@ 2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
1 sibling, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-04-12 17:23 UTC (permalink / raw)
To: u-boot
On Tue, Apr 12, 2016 at 11:19:18AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following small fixes and board-specific
> changes:
>
> The following changes since commit bbf8bef196ae52517284a0a2e2ffc94a4ff89f5f:
>
> Prepare v2016.05-rc1 (2016-04-11 22:22:25 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to aca84a214d70953505d56b7c9717d1a7c019902c:
>
> arm: mvebu: theadorable: Remove Board name output in checkboard (2016-04-12 11:13:40 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160412/5d186afa/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-04-12 9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
@ 2016-04-12 17:23 ` Tom Rini
1 sibling, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-04-12 17:23 UTC (permalink / raw)
To: u-boot
On Tue, Apr 12, 2016 at 11:19:18AM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following small fixes and board-specific
> changes:
>
> The following changes since commit bbf8bef196ae52517284a0a2e2ffc94a4ff89f5f:
>
> Prepare v2016.05-rc1 (2016-04-11 22:22:25 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to aca84a214d70953505d56b7c9717d1a7c019902c:
>
> arm: mvebu: theadorable: Remove Board name output in checkboard (2016-04-12 11:13:40 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160412/05c2cb08/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-04-06 13:47 Stefan Roese
2016-04-06 14:47 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-04-06 13:47 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull those 2 Marvell related patches.
Thanks,
Stefan
The following changes since commit 4ed6ed3c27a069a00c8a557d606a05276cc4653e:
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze (2016-04-04 14:34:09 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 46a16bd895144617575c788d9c2554aeef76ac44:
kirkwood_nand: claim MPP pins on the fly (2016-04-06 15:40:33 +0200)
----------------------------------------------------------------
Chris Packham (1):
kirkwood_nand: claim MPP pins on the fly
Stefan Roese (1):
spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
arch/arm/include/asm/arch-mvebu/spi.h | 17 ++++++++++++-----
drivers/mtd/nand/kirkwood_nand.c | 19 +++++++++++++++++++
drivers/spi/kirkwood_spi.c | 14 ++++++++++++++
3 files changed, 45 insertions(+), 5 deletions(-)
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-04-06 13:47 Stefan Roese
@ 2016-04-06 14:47 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-04-06 14:47 UTC (permalink / raw)
To: u-boot
On Wed, Apr 06, 2016 at 03:47:07PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull those 2 Marvell related patches.
>
> Thanks,
> Stefan
>
> The following changes since commit 4ed6ed3c27a069a00c8a557d606a05276cc4653e:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze (2016-04-04 14:34:09 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 46a16bd895144617575c788d9c2554aeef76ac44:
>
> kirkwood_nand: claim MPP pins on the fly (2016-04-06 15:40:33 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160406/f29b71a8/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-04-04 12:07 Stefan Roese
2016-04-05 0:01 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-04-04 12:07 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the Armada 375 support from the Marvell U-Boot
git repository.
Thanks,
Stefan
The following changes since commit 563d8d93585035fa2a0b20190c1008eb625432c4:
net: phy: Realtek RTL8211B/C PHY ID fix (2016-04-02 19:26:08 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to ebe7890321250352b812dbbf127a46ef58256d1c:
arm: mvebu: Don't enable d-cache on A375 (2016-04-04 11:22:15 +0200)
----------------------------------------------------------------
Stefan Roese (6):
spi: kirkwood_spi.c: Add compatible match ID for Armada 375
net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375
dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4
arm: mvebu: Add basic support for the Marvell Armada 375 SoC
arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
arm: mvebu: Don't enable d-cache on A375
arch/arm/Kconfig | 2 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-375-db.dts | 216 ++
arch/arm/dts/armada-375.dtsi | 658 +++++
arch/arm/mach-mvebu/Kconfig | 12 +-
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/cpu.c | 75 +-
arch/arm/mach-mvebu/include/mach/config.h | 5 +-
arch/arm/mach-mvebu/include/mach/cpu.h | 5 +
arch/arm/mach-mvebu/include/mach/soc.h | 19 +-
arch/arm/mach-mvebu/spl.c | 3 +
board/Marvell/db-88f6720/MAINTAINERS | 6 +
board/Marvell/db-88f6720/Makefile | 7 +
board/Marvell/db-88f6720/db-88f6720.c | 91 +
board/Marvell/db-88f6720/kwbimage.cfg | 12 +
configs/db-88f6720_defconfig | 28 +
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1 +
drivers/net/mvpp2.c | 4190 +++++++++++++++++++++++++++++
drivers/spi/kirkwood_spi.c | 1 +
include/configs/db-88f6720.h | 120 +
include/dt-bindings/phy/phy.h | 19 +
include/net.h | 2 +
23 files changed, 5473 insertions(+), 9 deletions(-)
create mode 100644 arch/arm/dts/armada-375-db.dts
create mode 100644 arch/arm/dts/armada-375.dtsi
create mode 100644 board/Marvell/db-88f6720/MAINTAINERS
create mode 100644 board/Marvell/db-88f6720/Makefile
create mode 100644 board/Marvell/db-88f6720/db-88f6720.c
create mode 100644 board/Marvell/db-88f6720/kwbimage.cfg
create mode 100644 configs/db-88f6720_defconfig
create mode 100644 drivers/net/mvpp2.c
create mode 100644 include/configs/db-88f6720.h
create mode 100644 include/dt-bindings/phy/phy.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-04-04 12:07 Stefan Roese
@ 2016-04-05 0:01 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-04-05 0:01 UTC (permalink / raw)
To: u-boot
On Mon, Apr 04, 2016 at 02:07:13PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull the Armada 375 support from the Marvell U-Boot
> git repository.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 563d8d93585035fa2a0b20190c1008eb625432c4:
>
> net: phy: Realtek RTL8211B/C PHY ID fix (2016-04-02 19:26:08 -0400)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to ebe7890321250352b812dbbf127a46ef58256d1c:
>
> arm: mvebu: Don't enable d-cache on A375 (2016-04-04 11:22:15 +0200)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160404/9a8e5852/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-03-24 10:09 Stefan Roese
2016-03-25 22:59 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-03-24 10:09 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following patches from the marvell git
repository. I plan to send some other patches still under
review a bit later - perhaps in a week or. As I'm off in
Easter vacation starting tomorrow.
Thanks,
Stefan
The following changes since commit d085ecd61b9956cda0d37b89b5c538f54440fe58:
ARM: uniphier: switch to raw U-Boot image (2016-03-24 01:45:41 +0900)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to 7497a6a1f13eb86d68a936edecfd682bbad5752d:
tools: kwboot: Add xmodem timeout option (2016-03-24 10:08:49 +0100)
----------------------------------------------------------------
Andreas F?rber (1):
arm: mvebu: db-88f6820: Drop obsolete binary.0 placeholder
Dirk Eibach (1):
arm: mvebu: Fix ddr3_init() cpu config
Kevin Smith (2):
tools: kwboot: Clean up usage text
tools: kwboot: Add xmodem timeout option
Peter Korsgaard (1):
ARM: sheevaplug: correct nand partition layout
Stefan Roese (5):
gpio: Add DM GPIO driver for Marvell MVEBU
fpga: altera: Add StratixV support
arm: mvebu: Add some SPI CS attributes
arm: mvebu: spi.h: Add registers for direct write access
arm: mvebu: theadorable: Add StratixV FPGA programming support
arch/arm/dts/armada-xp-theadorable.dts | 21 ++++
arch/arm/include/asm/arch-mvebu/spi.h | 3 +
arch/arm/mach-mvebu/include/mach/cpu.h | 3 +
board/Marvell/db-88f6820-gp/binary.0 | 16 ---
board/theadorable/Makefile | 1 +
board/theadorable/fpga.c | 179 +++++++++++++++++++++++++++++++++
board/theadorable/theadorable.c | 13 +++
board/theadorable/theadorable.h | 12 +++
configs/theadorable_debug_defconfig | 3 +-
configs/theadorable_defconfig | 2 +-
drivers/ddr/marvell/a38x/ddr3_init.c | 2 -
drivers/fpga/Makefile | 1 +
drivers/fpga/altera.c | 3 +
drivers/fpga/stratixv.c | 103 +++++++++++++++++++
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/mvebu_gpio.c | 119 ++++++++++++++++++++++
include/altera.h | 20 ++++
include/configs/sheevaplug.h | 6 +-
include/configs/theadorable.h | 5 +
tools/kwboot.c | 13 ++-
21 files changed, 507 insertions(+), 26 deletions(-)
delete mode 100644 board/Marvell/db-88f6820-gp/binary.0
create mode 100644 board/theadorable/fpga.c
create mode 100644 board/theadorable/theadorable.h
create mode 100644 drivers/fpga/stratixv.c
create mode 100644 drivers/gpio/mvebu_gpio.c
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-03-24 10:09 Stefan Roese
@ 2016-03-25 22:59 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-03-25 22:59 UTC (permalink / raw)
To: u-boot
On Thu, Mar 24, 2016 at 11:09:19AM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull the following patches from the marvell git
> repository. I plan to send some other patches still under
> review a bit later - perhaps in a week or. As I'm off in
> Easter vacation starting tomorrow.
>
> Thanks,
> Stefan
>
> The following changes since commit d085ecd61b9956cda0d37b89b5c538f54440fe58:
>
> ARM: uniphier: switch to raw U-Boot image (2016-03-24 01:45:41 +0900)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to 7497a6a1f13eb86d68a936edecfd682bbad5752d:
>
> tools: kwboot: Add xmodem timeout option (2016-03-24 10:08:49 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160325/8582a8bf/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-03-14 22:37 Luka Perkov
2016-03-15 11:52 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Luka Perkov @ 2016-03-14 22:37 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull these missed patches from Peter for which I should have sent
pull request a while back.
The following changes since commit df61a74e6845ec9bdcdd48d2aff5e9c2c6debeaa:
Prepare v2016.03 (2016-03-14 10:20:21 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git
for you to fetch changes up to a807369eded75b34f5184552dab00ff73e7ca3bc:
ARM: sheevaplug: drop unneded 'usb start' from boot command (2016-03-14 23:29:36 +0100)
----------------------------------------------------------------
Peter Korsgaard (3):
ARM: sheevaplug: unbreak default environment
ARM: sheevaplug: unbreak kernel bootargs / mtdparts command by dropping double mtdparts=
ARM: sheevaplug: drop unneded 'usb start' from boot command
include/configs/sheevaplug.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
Thanks,
Luka
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-03-14 22:37 Luka Perkov
@ 2016-03-15 11:52 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-03-15 11:52 UTC (permalink / raw)
To: u-boot
On Mon, Mar 14, 2016 at 10:37:11PM +0000, Luka Perkov wrote:
> Hi Tom,
>
> please pull these missed patches from Peter for which I should have sent
> pull request a while back.
>
> The following changes since commit df61a74e6845ec9bdcdd48d2aff5e9c2c6debeaa:
>
> Prepare v2016.03 (2016-03-14 10:20:21 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-marvell.git
>
> for you to fetch changes up to a807369eded75b34f5184552dab00ff73e7ca3bc:
>
> ARM: sheevaplug: drop unneded 'usb start' from boot command (2016-03-14 23:29:36 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160315/c5f29776/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-01-27 6:58 Stefan Roese
2016-01-28 23:18 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-01-27 6:58 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull the following patch.
Thanks,
Stefan
The following changes since commit 9e4de7fd4acc8f99b6d383c711d21c0159849629:
Merge branch 'master' of http://git.denx.de/u-boot-sunxi (2016-01-26
17:45:37 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to b20c38a973a51bf3f663bd298c63ad1b8e0de445:
arm: mvebu: Add support for the Armada XP theadorable board
(2016-01-27 07:45:43 +0100)
----------------------------------------------------------------
Stefan Roese (1):
arm: mvebu: Add support for the Armada XP theadorable board
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/armada-xp-theadorable.dts | 143 +++++++++++++++++++++++++++
arch/arm/mach-mvebu/Kconfig | 6 ++
board/theadorable/MAINTAINERS | 7 ++
board/theadorable/Makefile | 7 ++
board/theadorable/kwbimage.cfg | 12 +++
board/theadorable/theadorable.c | 171
+++++++++++++++++++++++++++++++++
configs/theadorable_debug_defconfig | 28 ++++++
configs/theadorable_defconfig | 26 +++++
include/configs/theadorable.h | 170
++++++++++++++++++++++++++++++++
10 files changed, 572 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/armada-xp-theadorable.dts
create mode 100644 board/theadorable/MAINTAINERS
create mode 100644 board/theadorable/Makefile
create mode 100644 board/theadorable/kwbimage.cfg
create mode 100644 board/theadorable/theadorable.c
create mode 100644 configs/theadorable_debug_defconfig
create mode 100644 configs/theadorable_defconfig
create mode 100644 include/configs/theadorable.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
@ 2016-01-14 13:28 Stefan Roese
2016-01-14 18:04 ` Tom Rini
0 siblings, 1 reply; 130+ messages in thread
From: Stefan Roese @ 2016-01-14 13:28 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull all the pending Marvell patches, mostly Armada
XP and 38x related.
Thanks,
Stefan
The following changes since commit d29892ba854f40980b84f86566cd0c2308c66afe:
part_dos.c: Don't wrap to negative after 2G sectors (2016-01-13 16:33:20 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to f822d8578ba395d9af1cc315a2fb87b1eed3d355:
MAINTAINERS: Update Marvell custodianship (2016-01-14 14:17:36 +0100)
----------------------------------------------------------------
Phil Sutter (10):
drivers/pci: Fix for debug builds without CONFIG_PCI_ENUM_ONLY
README: Review the u-boot porting guide list
axp: Fix debugging support in DDR3 write leveling
drivers/pci/pci_mvebu: Fix for boards with X4 lanes
mvebu: axp: refactor board_sat_r_get() and caller
mvebu: Introduce kconfig symbols for SoC variants
mvebu: axp: Rename MV_DDR_32BIT to CONFIG_DDR_32BIT
mvebu: Add rudimental MV78230 support
mvebu: Support Synology DS414
mvebu: ds414: Implement Synology specific command set
Stefan Roese (34):
arm: mvebu/kirkwood: Use common timer functions
arm: mvebu: ddr: Fix compilation warning
arm: mvebu: Add DM and OF_CONTROL support to SPL
spi: kirkwood_spi.c: Prepare for driver model support
spi: kirkwood_spi.c: Add driver model support
arm: mvebu: Add SPI driver model support
arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm board
arm: mvebu: armada-388-gp.dts: Add ethernet aliases
net: mvneta: Convert to driver model
arm: mvebu: Move some defines to common include file
arm: mvebu: Add SolidRun ClearFog Armada 38x initial support
arm: mvebu: db-mv784mp-gp: Switch from IDE to SATA support
arm: mvebu: db-mv784mp-gp: Enable common file-system support
arm: mvebu: db-mv784mp-gp: Enable cache command
arm: mvebu: Enable L2 cache on Armada XP
arm: mvebu: Add v7_outer_cache_disable function for AXP & A38x
arm: mvebu: Don't call arch_cpu_init() from SPL at all
arm: mvebu: Remove SYS_MALLOC_CLEAR_ON_INIT from DB-MV784MP-GP AXP board
arm: mvebu: Don't disable cache at startup on Armada XP at all
arm: mvebu: Simplify code in setup_usb_phys() a bit
arm: mvebu: Don't use 0 as board ID as its used for the custom boards
arm: mvebu: Add support for MV78260
arm: mvebu: Make ECC support configurable on Armada XP
arm: mvebu: Don't include "netdev.h" in cpu.c
arm: mvebu: Make serdes setup on Armada XP less noisy
arm: mvebu: Print CPU and SDRAM frequency upon startup
arm: mvebu: Consolidate board Kconfig options into one file
arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig
arm: mvebu: Remove leftover Makefile
arm: mvebu: Move SAR register defines into header
arm: mvebu: Make local structs static const
arm: mvebu: Add runtime boot-device detection
arm: mvebu: Add runtime detection of UART (xmodem) boot-mode
MAINTAINERS: Update Marvell custodianship
Tor Krill (1):
sata: Add SATA driver with DMA support for Marvell Kirkwood and Armada XP
MAINTAINERS | 4 +-
Makefile | 10 -
README | 11 +-
arch/arm/Kconfig | 9 +-
arch/arm/Makefile | 2 +-
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/armada-370-xp.dtsi | 1 +
arch/arm/dts/armada-388-clearfog.dts | 509 ++++++++++
arch/arm/dts/armada-388-gp.dts | 9 +
arch/arm/dts/armada-38x.dtsi | 2 +
arch/arm/dts/armada-xp-gp.dts | 7 +
arch/arm/dts/armada-xp-maxbcm.dts | 249 +++++
arch/arm/dts/armada-xp-synology-ds414.dts | 337 +++++++
arch/arm/dts/armada-xp.dtsi | 1 +
arch/arm/mach-kirkwood/include/mach/config.h | 5 +
arch/arm/mach-mvebu/Kconfig | 63 +-
arch/arm/mach-mvebu/Makefile | 8 +-
arch/arm/mach-mvebu/cpu.c | 207 ++--
arch/arm/mach-mvebu/dram.c | 20 +-
arch/arm/mach-mvebu/include/mach/config.h | 26 +-
arch/arm/mach-mvebu/include/mach/cpu.h | 10 +
arch/arm/mach-mvebu/include/mach/soc.h | 63 +-
arch/arm/mach-mvebu/lowlevel_spl.S | 6 -
arch/arm/mach-mvebu/mbus.c | 2 +-
arch/arm/mach-mvebu/serdes/axp/board_env_spec.h | 4 +-
.../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 88 +-
arch/arm/mach-mvebu/spl.c | 87 +-
arch/arm/mach-mvebu/timer.c | 136 +--
arch/arm/mach-mvebu/u-boot-spl.lds | 57 --
arch/arm/mvebu-common/Makefile | 14 -
board/Marvell/db-88f6820-gp/Kconfig | 12 -
board/Marvell/db-88f6820-gp/kwbimage.cfg | 2 +-
board/Marvell/db-mv784mp-gp/Kconfig | 12 -
board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c | 32 +-
board/Marvell/db-mv784mp-gp/kwbimage.cfg | 2 +-
board/Synology/common/Makefile | 7 +
board/Synology/common/cmd_syno.c | 227 +++++
board/Synology/ds414/Makefile | 7 +
board/Synology/ds414/ds414.c | 185 ++++
board/Synology/ds414/kwbimage.cfg | 12 +
board/maxbcm/Kconfig | 9 -
board/maxbcm/kwbimage.cfg | 2 +-
board/maxbcm/maxbcm.c | 20 +-
board/solidrun/clearfog/MAINTAINERS | 6 +
board/solidrun/clearfog/Makefile | 7 +
board/solidrun/clearfog/README | 18 +
board/solidrun/clearfog/clearfog.c | 156 +++
board/solidrun/clearfog/kwbimage.cfg | 12 +
configs/clearfog_defconfig | 21 +
configs/db-88f6820-gp_defconfig | 6 +
configs/db-mv784mp-gp_defconfig | 7 +
configs/ds414_defconfig | 18 +
configs/maxbcm_defconfig | 8 +-
drivers/Makefile | 4 +-
drivers/block/Makefile | 1 +
drivers/block/mvsata_ide.c | 6 +-
drivers/block/sata_mv.c | 1045 ++++++++++++++++++++
drivers/ddr/marvell/a38x/ddr3_debug.c | 15 -
drivers/ddr/marvell/a38x/ddr3_training_ip.h | 2 -
drivers/ddr/marvell/axp/ddr3_axp.h | 3 +
drivers/ddr/marvell/axp/ddr3_axp_config.h | 7 +-
drivers/ddr/marvell/axp/ddr3_axp_mc_static.h | 20 +-
drivers/ddr/marvell/axp/ddr3_write_leveling.c | 4 +-
drivers/i2c/mvtwsi.c | 2 +-
drivers/net/mvneta.c | 230 +++--
drivers/pci/pci_auto_old.c | 2 +-
drivers/pci/pci_mvebu.c | 14 +
drivers/spi/kirkwood_spi.c | 217 +++-
include/configs/clearfog.h | 176 ++++
include/configs/db-88f6820-gp.h | 25 +-
include/configs/db-mv784mp-gp.h | 60 +-
include/configs/ds414.h | 162 +++
include/configs/maxbcm.h | 15 +-
tools/Makefile | 2 +-
tools/kwboot.c | 14 +-
75 files changed, 4047 insertions(+), 719 deletions(-)
create mode 100644 arch/arm/dts/armada-388-clearfog.dts
create mode 100644 arch/arm/dts/armada-xp-maxbcm.dts
create mode 100644 arch/arm/dts/armada-xp-synology-ds414.dts
delete mode 100644 arch/arm/mach-mvebu/u-boot-spl.lds
delete mode 100644 arch/arm/mvebu-common/Makefile
delete mode 100644 board/Marvell/db-88f6820-gp/Kconfig
delete mode 100644 board/Marvell/db-mv784mp-gp/Kconfig
create mode 100644 board/Synology/common/Makefile
create mode 100644 board/Synology/common/cmd_syno.c
create mode 100644 board/Synology/ds414/Makefile
create mode 100644 board/Synology/ds414/ds414.c
create mode 100644 board/Synology/ds414/kwbimage.cfg
delete mode 100644 board/maxbcm/Kconfig
create mode 100644 board/solidrun/clearfog/MAINTAINERS
create mode 100644 board/solidrun/clearfog/Makefile
create mode 100644 board/solidrun/clearfog/README
create mode 100644 board/solidrun/clearfog/clearfog.c
create mode 100644 board/solidrun/clearfog/kwbimage.cfg
create mode 100644 configs/clearfog_defconfig
create mode 100644 configs/ds414_defconfig
create mode 100644 drivers/block/sata_mv.c
create mode 100644 include/configs/clearfog.h
create mode 100644 include/configs/ds414.h
^ permalink raw reply [flat|nested] 130+ messages in thread
* [U-Boot] Please pull u-boot-marvell/master
2016-01-14 13:28 Stefan Roese
@ 2016-01-14 18:04 ` Tom Rini
0 siblings, 0 replies; 130+ messages in thread
From: Tom Rini @ 2016-01-14 18:04 UTC (permalink / raw)
To: u-boot
On Thu, Jan 14, 2016 at 02:28:20PM +0100, Stefan Roese wrote:
> Hi Tom,
>
> please pull all the pending Marvell patches, mostly Armada
> XP and 38x related.
>
> Thanks,
> Stefan
>
> The following changes since commit d29892ba854f40980b84f86566cd0c2308c66afe:
>
> part_dos.c: Don't wrap to negative after 2G sectors (2016-01-13 16:33:20 -0500)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-marvell.git
>
> for you to fetch changes up to f822d8578ba395d9af1cc315a2fb87b1eed3d355:
>
> MAINTAINERS: Update Marvell custodianship (2016-01-14 14:17:36 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160114/0c948381/attachment.sig>
^ permalink raw reply [flat|nested] 130+ messages in thread
end of thread, other threads:[~2019-11-18 2:14 UTC | newest]
Thread overview: 130+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-09 10:15 [U-Boot] Please pull u-boot-marvell/master Stefan Roese
2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-11-14 7:39 Stefan Roese
2019-11-18 2:14 ` Tom Rini
2019-08-12 12:08 Stefan Roese
2019-08-13 16:50 ` Tom Rini
2019-07-11 16:01 Stefan Roese
2019-07-12 13:32 ` Tom Rini
2019-06-04 6:39 Stefan Roese
2019-06-05 14:24 ` Tom Rini
2019-05-27 11:35 Stefan Roese
2019-05-27 18:35 ` Tom Rini
2019-05-20 7:59 Stefan Roese
2019-05-20 17:53 ` Tom Rini
2019-05-09 10:08 Stefan Roese
2019-05-09 22:25 ` Tom Rini
2019-05-03 11:49 Stefan Roese
2019-05-04 17:01 ` Tom Rini
2019-04-26 10:58 Stefan Roese
2019-04-27 14:48 ` Tom Rini
2019-04-11 12:34 Stefan Roese
2019-04-11 14:49 ` Tom Rini
2019-04-11 14:51 ` Stefan Roese
2019-04-11 14:52 ` Tom Rini
2019-03-19 12:49 Stefan Roese
2019-03-20 13:46 ` Tom Rini
2019-02-11 12:34 Stefan Roese
2019-02-11 22:41 ` Tom Rini
2019-02-05 13:36 Stefan Roese
2019-02-08 3:13 ` Tom Rini
2019-01-21 10:52 Stefan Roese
2019-01-22 2:29 ` Tom Rini
2018-12-21 15:31 Stefan Roese
2018-12-23 17:31 ` Tom Rini
2018-11-30 14:45 Stefan Roese
2018-11-30 22:09 ` Tom Rini
2018-11-20 12:15 Stefan Roese
2018-11-20 21:48 ` Tom Rini
2018-09-19 15:12 Stefan Roese
2018-09-20 13:24 ` Tom Rini
2018-08-07 13:10 Stefan Roese
2018-08-08 1:35 ` Tom Rini
2018-06-05 9:33 Stefan Roese
2018-06-05 14:14 ` Tom Rini
2018-05-16 12:05 Stefan Roese
2018-05-16 15:37 ` Tom Rini
2018-05-17 8:36 ` Chris Packham
2018-05-17 8:45 ` Chris Packham
2018-05-17 8:48 ` Stefan Roese
2018-05-17 9:06 ` Chris Packham
2018-05-14 11:58 Stefan Roese
2018-05-14 15:11 ` Tom Rini
2018-05-14 15:16 ` Stefan Roese
2018-05-15 1:23 ` Chris Packham
2018-04-17 8:53 Stefan Roese
2018-04-17 19:39 ` Tom Rini
2018-01-29 12:42 Stefan Roese
2018-01-29 16:55 ` Tom Rini
2018-01-20 9:01 Stefan Roese
2018-01-20 16:58 ` Tom Rini
2018-01-10 11:40 Stefan Roese
2018-01-10 16:42 ` Tom Rini
2017-11-30 12:33 Stefan Roese
2017-11-30 18:45 ` Tom Rini
2017-11-16 13:09 Stefan Roese
2017-11-17 1:52 ` Tom Rini
2017-09-26 8:55 Stefan Roese
2017-09-27 2:45 ` Tom Rini
2017-08-30 8:06 Stefan Roese
2017-09-01 16:42 ` Tom Rini
2017-08-21 9:43 Stefan Roese
2017-08-22 20:53 ` Tom Rini
2017-08-10 8:26 Stefan Roese
2017-08-10 20:17 ` Tom Rini
2017-08-08 12:26 Stefan Roese
2017-08-09 15:26 ` Tom Rini
2017-07-12 6:00 Stefan Roese
2017-07-12 14:25 ` Tom Rini
2017-06-23 8:42 Stefan Roese
2017-06-23 13:22 ` Tom Rini
2017-05-31 9:02 Stefan Roese
2017-06-01 12:10 ` Tom Rini
2017-05-09 14:45 Stefan Roese
2017-05-09 23:49 ` Tom Rini
2017-03-29 9:24 Stefan Roese
2017-04-04 20:00 ` Tom Rini
2017-03-24 5:58 Stefan Roese
2017-03-24 17:36 ` Tom Rini
2017-02-17 11:15 Stefan Roese
2017-02-17 22:56 ` Tom Rini
2017-02-01 11:46 Stefan Roese
2017-02-01 21:33 ` Tom Rini
2017-01-25 7:46 Stefan Roese
2017-01-27 1:43 ` Tom Rini
2016-12-21 9:56 Stefan Roese
2016-12-21 13:06 ` Tom Rini
2016-12-12 10:47 Stefan Roese
2016-12-12 15:56 ` Tom Rini
2016-12-05 13:01 Stefan Roese
2016-12-05 16:01 ` Tom Rini
2016-12-01 12:57 Stefan Roese
2016-12-01 18:16 ` Tom Rini
2016-10-09 9:05 Stefan Roese
2016-10-13 0:48 ` Tom Rini
2016-09-27 15:33 Stefan Roese
2016-09-27 21:32 ` Tom Rini
2016-09-24 8:13 Stefan Roese
2016-09-24 16:04 ` Tom Rini
2016-08-26 6:46 Stefan Roese
2016-08-26 14:52 ` Tom Rini
2016-05-31 6:08 Stefan Roese
2016-05-31 14:50 ` Tom Rini
2016-05-20 9:10 Stefan Roese
2016-05-23 22:12 ` Tom Rini
2016-04-12 9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
2016-04-06 13:47 Stefan Roese
2016-04-06 14:47 ` Tom Rini
2016-04-04 12:07 Stefan Roese
2016-04-05 0:01 ` Tom Rini
2016-03-24 10:09 Stefan Roese
2016-03-25 22:59 ` Tom Rini
2016-03-14 22:37 Luka Perkov
2016-03-15 11:52 ` Tom Rini
2016-01-27 6:58 Stefan Roese
2016-01-28 23:18 ` Tom Rini
2016-01-14 13:28 Stefan Roese
2016-01-14 18:04 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.