From: Boojin Kim <boojin.kim@samsung.com> To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: Vinod Koul <vinod.koul@intel.com>, Kukjin Kim <kgene.kim@samsung.com>, Dan Williams <dan.j.williams@intel.com>, Jassi Brar <jassisinghbrar@gmail.com>, Mark Brown <broonie@opensource.wolfsonmicro.com>, Grant Likely <grant.likely@secretlab.ca>, Russell King <linux@arm.linux.org.uk>, Linus Walleij <linus.walleij@linaro.org>, Boojin Kim <boojin.kim@samsung.com> Subject: [PATCH v7 10/15] ARM: S5P64X0: Use generic DMA PL330 driver Date: Thu, 25 Aug 2011 11:13:40 +0900 [thread overview] Message-ID: <1314238425-6480-11-git-send-email-boojin.kim@samsung.com> (raw) In-Reply-To: <1314238425-6480-1-git-send-email-boojin.kim@samsung.com> This patch makes Samsung S5P64X0 to use DMA PL330 driver on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of SAMSUNG specific S3C-PL330 APIs. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p64x0/Kconfig | 4 +- arch/arm/mach-s5p64x0/clock-s5p6440.c | 9 +- arch/arm/mach-s5p64x0/clock-s5p6450.c | 9 +- arch/arm/mach-s5p64x0/dma.c | 273 ++++++++++++++++++++---------- arch/arm/mach-s5p64x0/include/mach/dma.h | 2 +- 5 files changed, 201 insertions(+), 96 deletions(-) diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 65c7518..9527ed2 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,14 +9,14 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT help Enable S5P6440 CPU support config CPU_S5P6450 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT help Enable S5P6450 CPU support diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 0e9cd30..c1f548f 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -146,7 +146,7 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { - .name = "pdma", + .name = "dma", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -499,6 +499,11 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_low, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -581,5 +586,7 @@ void __init s5p6440_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index d9dc16c..3d9b609 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -179,7 +179,7 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", + .name = "dma", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -553,6 +553,11 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_audio0, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6450_setup_clocks(void) { struct clk *xtal_clk; @@ -632,5 +637,7 @@ void __init s5p6450_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index d7ad944..aebf3fc 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -21,128 +21,219 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> + +#include <asm/irq.h> #include <mach/map.h> #include <mach/irqs.h> #include <mach/regs-clock.h> +#include <mach/dma.h> #include <plat/devs.h> -#include <plat/s3c-pl330-pdata.h> +#include <plat/irqs.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p64x0_pdma_resource[] = { - [0] = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DMA0, - .end = IRQ_DMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri s5p6440_pdma_peri[22] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, }, }; -static struct s3c_pl330_platdata s5p6440_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_MAX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_MAX, - [17] = DMACH_MAX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_MAX, - [23] = DMACH_MAX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MAX, - [28] = DMACH_MAX, - [29] = DMACH_PWM, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5p6440_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), + .peri = s5p6440_pdma_peri, }; -static struct s3c_pl330_platdata s5p6450_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_UART4_RX, - [9] = DMACH_UART4_TX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_PCM1_TX, - [17] = DMACH_PCM1_RX, - [18] = DMACH_PCM2_TX, - [19] = DMACH_PCM2_RX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_USI_TX, - [23] = DMACH_USI_RX, - [24] = DMACH_MAX, - [25] = DMACH_I2S1_TX, - [26] = DMACH_I2S1_RX, - [27] = DMACH_I2S2_TX, - [28] = DMACH_I2S2_RX, - [29] = DMACH_PWM, - [30] = DMACH_UART5_RX, - [31] = DMACH_UART5_TX, +struct dma_pl330_peri s5p6450_pdma_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_USI_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_USI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_UART5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART5_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5p64x0_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), - .resource = s5p64x0_pdma_resource, - .dev = { +struct dma_pl330_platdata s5p6450_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), + .peri = s5p6450_pdma_peri, +}; + +struct amba_device s5p64x0_device_pdma = { + .dev = { + .init_name = "dma-pl330", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, + .res = { + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DMA0, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5p64x0_dma_init(void) { - unsigned int id; - - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; + unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; if (id == 0x50000) s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; - platform_device_register(&s5p64x0_device_pdma); + amba_device_register(&s5p64x0_device_pdma, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h index 1beae2c..5a622af 100644 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ b/arch/arm/mach-s5p64x0/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ +/* This platform uses the common common DMA API driver for PL330 */ #include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: boojin.kim@samsung.com (Boojin Kim) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v7 10/15] ARM: S5P64X0: Use generic DMA PL330 driver Date: Thu, 25 Aug 2011 11:13:40 +0900 [thread overview] Message-ID: <1314238425-6480-11-git-send-email-boojin.kim@samsung.com> (raw) In-Reply-To: <1314238425-6480-1-git-send-email-boojin.kim@samsung.com> This patch makes Samsung S5P64X0 to use DMA PL330 driver on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of SAMSUNG specific S3C-PL330 APIs. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5p64x0/Kconfig | 4 +- arch/arm/mach-s5p64x0/clock-s5p6440.c | 9 +- arch/arm/mach-s5p64x0/clock-s5p6450.c | 9 +- arch/arm/mach-s5p64x0/dma.c | 273 ++++++++++++++++++++---------- arch/arm/mach-s5p64x0/include/mach/dma.h | 2 +- 5 files changed, 201 insertions(+), 96 deletions(-) diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 65c7518..9527ed2 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,14 +9,14 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT help Enable S5P6440 CPU support config CPU_S5P6450 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT help Enable S5P6450 CPU support diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 0e9cd30..c1f548f 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -146,7 +146,7 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { - .name = "pdma", + .name = "dma", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -499,6 +499,11 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_low, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -581,5 +586,7 @@ void __init s5p6440_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index d9dc16c..3d9b609 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -179,7 +179,7 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", + .name = "dma", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -553,6 +553,11 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_audio0, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6450_setup_clocks(void) { struct clk *xtal_clk; @@ -632,5 +637,7 @@ void __init s5p6450_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index d7ad944..aebf3fc 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -21,128 +21,219 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> + +#include <asm/irq.h> #include <mach/map.h> #include <mach/irqs.h> #include <mach/regs-clock.h> +#include <mach/dma.h> #include <plat/devs.h> -#include <plat/s3c-pl330-pdata.h> +#include <plat/irqs.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p64x0_pdma_resource[] = { - [0] = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DMA0, - .end = IRQ_DMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri s5p6440_pdma_peri[22] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, }, }; -static struct s3c_pl330_platdata s5p6440_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_MAX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_MAX, - [17] = DMACH_MAX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_MAX, - [23] = DMACH_MAX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MAX, - [28] = DMACH_MAX, - [29] = DMACH_PWM, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5p6440_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), + .peri = s5p6440_pdma_peri, }; -static struct s3c_pl330_platdata s5p6450_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_UART4_RX, - [9] = DMACH_UART4_TX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_PCM1_TX, - [17] = DMACH_PCM1_RX, - [18] = DMACH_PCM2_TX, - [19] = DMACH_PCM2_RX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_USI_TX, - [23] = DMACH_USI_RX, - [24] = DMACH_MAX, - [25] = DMACH_I2S1_TX, - [26] = DMACH_I2S1_RX, - [27] = DMACH_I2S2_TX, - [28] = DMACH_I2S2_RX, - [29] = DMACH_PWM, - [30] = DMACH_UART5_RX, - [31] = DMACH_UART5_TX, +struct dma_pl330_peri s5p6450_pdma_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_USI_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_USI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_UART5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART5_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5p64x0_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), - .resource = s5p64x0_pdma_resource, - .dev = { +struct dma_pl330_platdata s5p6450_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), + .peri = s5p6450_pdma_peri, +}; + +struct amba_device s5p64x0_device_pdma = { + .dev = { + .init_name = "dma-pl330", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, + .res = { + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DMA0, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5p64x0_dma_init(void) { - unsigned int id; - - id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; + unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000; if (id == 0x50000) s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata; else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; - platform_device_register(&s5p64x0_device_pdma); + amba_device_register(&s5p64x0_device_pdma, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h index 1beae2c..5a622af 100644 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ b/arch/arm/mach-s5p64x0/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ +/* This platform uses the common common DMA API driver for PL330 */ #include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ -- 1.7.1
next prev parent reply other threads:[~2011-08-25 3:18 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-25 2:13 To use DMA generic APIs for Samsung DMA Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-26 14:48 ` Jassi Brar 2011-08-26 14:48 ` Jassi Brar 2011-08-29 13:55 ` Vinod Koul 2011-08-29 13:55 ` Vinod Koul 2011-08-29 14:22 ` Vinod Koul 2011-08-29 14:22 ` Vinod Koul 2011-08-29 14:25 ` Vinod Koul 2011-08-29 14:25 ` Vinod Koul 2011-08-25 2:13 ` [PATCH v7 03/15] DMA: PL330: Modify device_control() Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-26 15:19 ` Jassi Brar 2011-08-26 15:19 ` Jassi Brar 2011-08-25 2:13 ` [PATCH v7 04/15] DMA: PL330: Add DMA_CYCLIC capability Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-26 15:25 ` Jassi Brar 2011-08-26 15:25 ` Jassi Brar 2011-08-25 2:13 ` [PATCH v7 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 06/15] ARM: SAMSUNG: Add common DMA operations Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 08/15] ARM: S5PV210: " Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 09/15] ARM: S5PC100: " Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` Boojin Kim [this message] 2011-08-25 2:13 ` [PATCH v7 10/15] ARM: S5P64X0: " Boojin Kim 2011-08-25 2:13 ` [PATCH v7 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 12/15] spi/s3c64xx: Add support DMA engine API Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 13/15] spi/s3c64xx: Merge dma control code Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 14/15] ASoC: Samsung: Update DMA interface Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction Boojin Kim 2011-08-25 2:13 ` Boojin Kim
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1314238425-6480-11-git-send-email-boojin.kim@samsung.com \ --to=boojin.kim@samsung.com \ --cc=broonie@opensource.wolfsonmicro.com \ --cc=dan.j.williams@intel.com \ --cc=grant.likely@secretlab.ca \ --cc=jassisinghbrar@gmail.com \ --cc=kgene.kim@samsung.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=vinod.koul@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.