From: Boojin Kim <boojin.kim@samsung.com> To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: Vinod Koul <vinod.koul@intel.com>, Kukjin Kim <kgene.kim@samsung.com>, Dan Williams <dan.j.williams@intel.com>, Jassi Brar <jassisinghbrar@gmail.com>, Mark Brown <broonie@opensource.wolfsonmicro.com>, Grant Likely <grant.likely@secretlab.ca>, Russell King <linux@arm.linux.org.uk>, Linus Walleij <linus.walleij@linaro.org>, Boojin Kim <boojin.kim@samsung.com> Subject: [PATCH v7 08/15] ARM: S5PV210: Use generic DMA PL330 driver Date: Thu, 25 Aug 2011 11:13:38 +0900 [thread overview] Message-ID: <1314238425-6480-9-git-send-email-boojin.kim@samsung.com> (raw) In-Reply-To: <1314238425-6480-1-git-send-email-boojin.kim@samsung.com> This patch makes Samsung S5PV210 to use DMA PL330 driver on DMADEVICE. The S5PV210 uses DMA generic APIs instead of SAMSUNG specific S3C-PL330 APIs. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5pv210/Kconfig | 2 +- arch/arm/mach-s5pv210/clock.c | 10 +- arch/arm/mach-s5pv210/dma.c | 316 +++++++++++++++++++----------- arch/arm/mach-s5pv210/include/mach/dma.h | 2 +- 4 files changed, 214 insertions(+), 116 deletions(-) diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 69dd87c..d960090 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,7 +11,7 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_EXT_INT select S5P_HRT select S5PV210_PM if PM diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e60..d35726a 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -203,6 +203,11 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -289,13 +294,13 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "pdma", + .name = "dma", .devname = "s3c-pl330.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", + .name = "dma", .devname = "s3c-pl330.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, @@ -1161,5 +1166,6 @@ void __init s5pv210_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 497d343..f79d0b0 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pv210/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,151 +21,239 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pv210_pdma0_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_MAX, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pv210_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pv210_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), - .resource = s5pv210_pdma0_resource, - .dev = { +struct amba_device s5pv210_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma0_pdata, }, -}; - -static struct resource s5pv210_pdma1_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PV210_PA_PDMA0, + .end = S5PV210_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_PCM2_RX, - [31] = DMACH_PCM2_TX, +struct dma_pl330_peri pdma1_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5pv210_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), - .resource = s5pv210_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pv210_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pv210_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma1_pdata, }, -}; - -static struct platform_device *s5pv210_dmacs[] __initdata = { - &s5pv210_device_pdma0, - &s5pv210_device_pdma1, + .res = { + .start = S5PV210_PA_PDMA1, + .end = S5PV210_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pv210_dma_init(void) { - platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs)); + amba_device_register(&s5pv210_device_pdma0, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h index 1beae2c..201842a 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/mach-s5pv210/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ +/* This platform uses the common DMA API driver for PL330 */ #include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: boojin.kim@samsung.com (Boojin Kim) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v7 08/15] ARM: S5PV210: Use generic DMA PL330 driver Date: Thu, 25 Aug 2011 11:13:38 +0900 [thread overview] Message-ID: <1314238425-6480-9-git-send-email-boojin.kim@samsung.com> (raw) In-Reply-To: <1314238425-6480-1-git-send-email-boojin.kim@samsung.com> This patch makes Samsung S5PV210 to use DMA PL330 driver on DMADEVICE. The S5PV210 uses DMA generic APIs instead of SAMSUNG specific S3C-PL330 APIs. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> --- arch/arm/mach-s5pv210/Kconfig | 2 +- arch/arm/mach-s5pv210/clock.c | 10 +- arch/arm/mach-s5pv210/dma.c | 316 +++++++++++++++++++----------- arch/arm/mach-s5pv210/include/mach/dma.h | 2 +- 4 files changed, 214 insertions(+), 116 deletions(-) diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 69dd87c..d960090 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,7 +11,7 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_EXT_INT select S5P_HRT select S5PV210_PM if PM diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e60..d35726a 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -203,6 +203,11 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -289,13 +294,13 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "pdma", + .name = "dma", .devname = "s3c-pl330.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", + .name = "dma", .devname = "s3c-pl330.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, @@ -1161,5 +1166,6 @@ void __init s5pv210_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 497d343..f79d0b0 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pv210/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,151 +21,239 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pv210_pdma0_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_MAX, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pv210_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pv210_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), - .resource = s5pv210_pdma0_resource, - .dev = { +struct amba_device s5pv210_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma0_pdata, }, -}; - -static struct resource s5pv210_pdma1_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PV210_PA_PDMA0, + .end = S5PV210_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_PCM2_RX, - [31] = DMACH_PCM2_TX, +struct dma_pl330_peri pdma1_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5pv210_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), - .resource = s5pv210_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pv210_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pv210_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma1_pdata, }, -}; - -static struct platform_device *s5pv210_dmacs[] __initdata = { - &s5pv210_device_pdma0, - &s5pv210_device_pdma1, + .res = { + .start = S5PV210_PA_PDMA1, + .end = S5PV210_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pv210_dma_init(void) { - platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs)); + amba_device_register(&s5pv210_device_pdma0, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h index 1beae2c..201842a 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/mach-s5pv210/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ +/* This platform uses the common DMA API driver for PL330 */ #include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ -- 1.7.1
next prev parent reply other threads:[~2011-08-25 2:28 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-25 2:13 To use DMA generic APIs for Samsung DMA Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 02/15] DMA: PL330: Update PL330 DMA API driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-26 14:48 ` Jassi Brar 2011-08-26 14:48 ` Jassi Brar 2011-08-29 13:55 ` Vinod Koul 2011-08-29 13:55 ` Vinod Koul 2011-08-29 14:22 ` Vinod Koul 2011-08-29 14:22 ` Vinod Koul 2011-08-29 14:25 ` Vinod Koul 2011-08-29 14:25 ` Vinod Koul 2011-08-25 2:13 ` [PATCH v7 03/15] DMA: PL330: Modify device_control() Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-26 15:19 ` Jassi Brar 2011-08-26 15:19 ` Jassi Brar 2011-08-25 2:13 ` [PATCH v7 04/15] DMA: PL330: Add DMA_CYCLIC capability Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-26 15:25 ` Jassi Brar 2011-08-26 15:25 ` Jassi Brar 2011-08-25 2:13 ` [PATCH v7 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 06/15] ARM: SAMSUNG: Add common DMA operations Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` Boojin Kim [this message] 2011-08-25 2:13 ` [PATCH v7 08/15] ARM: S5PV210: " Boojin Kim 2011-08-25 2:13 ` [PATCH v7 09/15] ARM: S5PC100: " Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 10/15] ARM: S5P64X0: " Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 12/15] spi/s3c64xx: Add support DMA engine API Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 13/15] spi/s3c64xx: Merge dma control code Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 14/15] ASoC: Samsung: Update DMA interface Boojin Kim 2011-08-25 2:13 ` Boojin Kim 2011-08-25 2:13 ` [PATCH v7 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction Boojin Kim 2011-08-25 2:13 ` Boojin Kim
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1314238425-6480-9-git-send-email-boojin.kim@samsung.com \ --to=boojin.kim@samsung.com \ --cc=broonie@opensource.wolfsonmicro.com \ --cc=dan.j.williams@intel.com \ --cc=grant.likely@secretlab.ca \ --cc=jassisinghbrar@gmail.com \ --cc=kgene.kim@samsung.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=vinod.koul@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.