From: Huang Ying <ying.huang@intel.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: "Bjørn Mork" <bjorn@mork.no>,
"huang ying" <huang.ying.caritas@gmail.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>,
"Zheng Yan" <zheng.z.yan@intel.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure
Date: Tue, 31 Jul 2012 08:24:11 +0800 [thread overview]
Message-ID: <1343694251.2591.5.camel@yhuang-dev> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1207301017190.1386-100000@iolanthe.rowland.org>
On Mon, 2012-07-30 at 10:19 -0400, Alan Stern wrote:
> On Mon, 30 Jul 2012, Huang Ying wrote:
>
> > > Yup, that worked in the quick test I just did.
> > >
> > > lspci reading the device config will still not wake the bridge, but I
> > > assume that is intentional? But loading the device driver now wakes
> > > both the bridge and the device, so that works.
> >
> > Do you have time to test the following patch to fix the lspci issue?
> >
> > Subject: [BUGFIX] PCI/PM: Keep parent bridge active when read/write config reg
> >
> > This patch fixes the following bug:
> >
> > http://marc.info/?l=linux-pci&m=134338059022620&w=2
> >
> > Where lspci does not work properly if a device and the corresponding
> > parent bridge (such as PCIe port) is suspended. This is because the
> > device configuration space registers will be not accessible if the
> > corresponding parent bridge is suspended.
> >
> > To solve the issue, the bridge/PCIe port connected to the device is
> > put into active state before read/write configuration space registers.
>
> What happens when you run lspci and the device is in D3cold? Then even
> if the parent bridge is active, lspci will still fail.
>
> It seems that in this case you need to resume the device itself, not
> just its parent.
Yes. Will do that.
Best Regards,
Huang Ying
next prev parent reply other threads:[~2012-07-31 0:24 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.44L0.1207241312050.1164-100000@iolanthe.rowland.org>
[not found] ` <87r4s0opck.fsf@nemi.mork.no>
2012-07-25 4:08 ` bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure Bjørn Mork
2012-07-25 4:34 ` Huang Ying
2012-07-25 9:58 ` Bjørn Mork
2012-07-25 13:30 ` huang ying
2012-07-25 13:58 ` Bjørn Mork
2012-07-25 18:56 ` Rafael J. Wysocki
2012-07-25 20:02 ` Rafael J. Wysocki
2012-07-25 22:36 ` Bjørn Mork
2012-07-26 2:38 ` Huang Ying
2012-07-26 2:38 ` Huang Ying
2012-07-26 8:54 ` Huang Ying
2012-07-26 10:35 ` Bjørn Mork
2012-07-26 11:02 ` Bjørn Mork
2012-07-26 12:04 ` Bjørn Mork
2012-07-26 15:03 ` Alan Stern
2012-07-26 16:24 ` Bjørn Mork
2012-07-27 5:35 ` Huang Ying
2012-07-27 9:11 ` Bjørn Mork
2012-07-30 3:15 ` Huang Ying
2012-07-30 8:08 ` Bjørn Mork
2012-07-30 13:31 ` huang ying
2012-07-30 16:57 ` Bjørn Mork
2012-07-31 0:22 ` Huang Ying
2012-07-30 14:19 ` Alan Stern
2012-07-31 0:24 ` Huang Ying [this message]
2012-07-31 3:18 ` Huang Ying
2012-07-31 17:07 ` Alan Stern
2012-07-27 15:03 ` Alan Stern
2012-07-27 19:11 ` Rafael J. Wysocki
2012-07-27 19:39 ` Alan Stern
2012-07-27 19:54 ` Rafael J. Wysocki
2012-07-28 16:12 ` Alan Stern
2012-07-28 20:26 ` Rafael J. Wysocki
2012-07-28 21:12 ` Alan Stern
2012-07-29 13:55 ` Rafael J. Wysocki
2012-07-29 14:55 ` Alan Stern
2012-07-29 19:18 ` Rafael J. Wysocki
2012-07-31 20:31 ` Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...) Rafael J. Wysocki
2012-07-31 21:05 ` Alan Stern
2012-07-31 21:34 ` Rafael J. Wysocki
2012-07-31 21:49 ` Rafael J. Wysocki
2012-08-01 14:36 ` Alan Stern
2012-08-01 21:24 ` Rafael J. Wysocki
2012-08-02 20:16 ` Alan Stern
2012-08-02 21:26 ` Rafael J. Wysocki
2012-08-03 2:20 ` Alan Stern
2012-08-03 3:37 ` Ming Lei
2012-08-03 14:28 ` Alan Stern
2012-08-04 19:47 ` Rafael J. Wysocki
2012-08-04 20:25 ` Alan Stern
2012-08-04 20:48 ` Rafael J. Wysocki
2012-08-04 20:48 ` Alan Stern
2012-08-04 21:15 ` Rafael J. Wysocki
2012-08-04 22:13 ` Alan Stern
2012-08-05 15:26 ` Rafael J. Wysocki
2012-08-06 13:30 ` Ming Lei
2012-08-06 14:47 ` Alan Stern
2012-08-07 1:35 ` Ming Lei
2012-08-07 11:23 ` Rafael J. Wysocki
2012-08-07 15:14 ` Ming Lei
2012-08-07 15:42 ` Alan Stern
2012-08-07 16:30 ` Ming Lei
2012-08-07 20:57 ` Rafael J. Wysocki
2012-08-07 20:45 ` Rafael J. Wysocki
2012-08-08 2:02 ` Ming Lei
2012-08-08 18:42 ` Alan Stern
2012-08-08 20:16 ` Rafael J. Wysocki
2012-08-09 5:55 ` Ming Lei
2012-08-09 10:46 ` Rafael J. Wysocki
2012-08-09 10:55 ` Ming Lei
2012-08-09 19:41 ` Rafael J. Wysocki
2012-08-10 3:19 ` Ming Lei
2012-08-10 20:29 ` Rafael J. Wysocki
2012-08-08 22:27 ` Rafael J. Wysocki
2012-08-06 15:48 ` Alan Stern
2012-08-06 20:30 ` Rafael J. Wysocki
2012-08-07 12:28 ` Rafael J. Wysocki
2012-08-07 17:15 ` Alan Stern
2012-08-07 21:31 ` Rafael J. Wysocki
2012-08-03 14:05 ` Alan Stern
2012-08-04 20:08 ` Rafael J. Wysocki
2012-08-04 20:42 ` Alan Stern
2012-08-04 20:59 ` Rafael J. Wysocki
2012-08-04 19:35 ` Rafael J. Wysocki
2012-07-29 20:12 ` bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure Jassi Brar
2012-07-29 21:44 ` Alan Stern
2012-07-25 19:51 ` [PATCH] PCI / PM: Fix messages printed by acpi_pci_set_power_state() Rafael J. Wysocki
2012-07-25 20:02 ` Alan Stern
2012-07-25 20:48 ` [PATCH][update] " Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343694251.2591.5.camel@yhuang-dev \
--to=ying.huang@intel.com \
--cc=bhelgaas@google.com \
--cc=bjorn@mork.no \
--cc=huang.ying.caritas@gmail.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=stern@rowland.harvard.edu \
--cc=zheng.z.yan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.