From: "Bjørn Mork" <bjorn@mork.no>
To: Huang Ying <ying.huang@intel.com>
Cc: huang ying <huang.ying.caritas@gmail.com>,
"Rafael J. Wysocki" <rjw@sisk.pl>,
Zheng Yan <zheng.z.yan@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linux-usb@vger.kernel.org,
Alan Stern <stern@rowland.harvard.edu>
Subject: Re: bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure
Date: Mon, 30 Jul 2012 10:08:00 +0200 [thread overview]
Message-ID: <871ujtr7rz.fsf@nemi.mork.no> (raw)
In-Reply-To: <1343618131.3874.37.camel@yhuang-dev> (Huang Ying's message of "Mon, 30 Jul 2012 11:15:31 +0800")
Huang Ying <ying.huang@intel.com> writes:
> Do you have time to test the following patch to fix the lspci issue?
>
> Subject: [BUGFIX] PCI/PM: Keep parent bridge active when read/write config reg
Sure. But keep this going and I will file a request for modular build
of the PCI subsystem :-)
The patch works fine for me:
nemi:/home/bjorn# lspci -t
-[0000:00]-+-00.0
+-02.0
+-02.1
+-03.0
+-19.0
+-1a.0
+-1a.1
+-1a.2
+-1a.7
+-1b.0
+-1c.0-[02]--
+-1c.1-[03]----00.0
+-1d.0
+-1d.1
+-1d.2
+-1d.7
+-1e.0-[15]--
+-1f.0
+-1f.2
\-1f.3
nemi:/home/bjorn# lspci -vvnns 1c.1; lspci -vvnns 3:0
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0500000-f05fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4143
Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: pcieport
03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4236]
Subsystem: Intel Corporation Device [8086:1011]
Physical Slot: 1
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4183
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-16-ea-ff-ff-b3-07-88
Bjørn
next prev parent reply other threads:[~2012-07-30 8:08 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.44L0.1207241312050.1164-100000@iolanthe.rowland.org>
[not found] ` <87r4s0opck.fsf@nemi.mork.no>
2012-07-25 4:08 ` bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure Bjørn Mork
2012-07-25 4:34 ` Huang Ying
2012-07-25 9:58 ` Bjørn Mork
2012-07-25 13:30 ` huang ying
2012-07-25 13:58 ` Bjørn Mork
2012-07-25 18:56 ` Rafael J. Wysocki
2012-07-25 20:02 ` Rafael J. Wysocki
2012-07-25 22:36 ` Bjørn Mork
2012-07-26 2:38 ` Huang Ying
2012-07-26 2:38 ` Huang Ying
2012-07-26 8:54 ` Huang Ying
2012-07-26 10:35 ` Bjørn Mork
2012-07-26 11:02 ` Bjørn Mork
2012-07-26 12:04 ` Bjørn Mork
2012-07-26 15:03 ` Alan Stern
2012-07-26 16:24 ` Bjørn Mork
2012-07-27 5:35 ` Huang Ying
2012-07-27 9:11 ` Bjørn Mork
2012-07-30 3:15 ` Huang Ying
2012-07-30 8:08 ` Bjørn Mork [this message]
2012-07-30 13:31 ` huang ying
2012-07-30 16:57 ` Bjørn Mork
2012-07-31 0:22 ` Huang Ying
2012-07-30 14:19 ` Alan Stern
2012-07-31 0:24 ` Huang Ying
2012-07-31 3:18 ` Huang Ying
2012-07-31 17:07 ` Alan Stern
2012-07-27 15:03 ` Alan Stern
2012-07-27 19:11 ` Rafael J. Wysocki
2012-07-27 19:39 ` Alan Stern
2012-07-27 19:54 ` Rafael J. Wysocki
2012-07-28 16:12 ` Alan Stern
2012-07-28 20:26 ` Rafael J. Wysocki
2012-07-28 21:12 ` Alan Stern
2012-07-29 13:55 ` Rafael J. Wysocki
2012-07-29 14:55 ` Alan Stern
2012-07-29 19:18 ` Rafael J. Wysocki
2012-07-31 20:31 ` Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...) Rafael J. Wysocki
2012-07-31 21:05 ` Alan Stern
2012-07-31 21:34 ` Rafael J. Wysocki
2012-07-31 21:49 ` Rafael J. Wysocki
2012-08-01 14:36 ` Alan Stern
2012-08-01 21:24 ` Rafael J. Wysocki
2012-08-02 20:16 ` Alan Stern
2012-08-02 21:26 ` Rafael J. Wysocki
2012-08-03 2:20 ` Alan Stern
2012-08-03 3:37 ` Ming Lei
2012-08-03 14:28 ` Alan Stern
2012-08-04 19:47 ` Rafael J. Wysocki
2012-08-04 20:25 ` Alan Stern
2012-08-04 20:48 ` Rafael J. Wysocki
2012-08-04 20:48 ` Alan Stern
2012-08-04 21:15 ` Rafael J. Wysocki
2012-08-04 22:13 ` Alan Stern
2012-08-05 15:26 ` Rafael J. Wysocki
2012-08-06 13:30 ` Ming Lei
2012-08-06 14:47 ` Alan Stern
2012-08-07 1:35 ` Ming Lei
2012-08-07 11:23 ` Rafael J. Wysocki
2012-08-07 15:14 ` Ming Lei
2012-08-07 15:42 ` Alan Stern
2012-08-07 16:30 ` Ming Lei
2012-08-07 20:57 ` Rafael J. Wysocki
2012-08-07 20:45 ` Rafael J. Wysocki
2012-08-08 2:02 ` Ming Lei
2012-08-08 18:42 ` Alan Stern
2012-08-08 20:16 ` Rafael J. Wysocki
2012-08-09 5:55 ` Ming Lei
2012-08-09 10:46 ` Rafael J. Wysocki
2012-08-09 10:55 ` Ming Lei
2012-08-09 19:41 ` Rafael J. Wysocki
2012-08-10 3:19 ` Ming Lei
2012-08-10 20:29 ` Rafael J. Wysocki
2012-08-08 22:27 ` Rafael J. Wysocki
2012-08-06 15:48 ` Alan Stern
2012-08-06 20:30 ` Rafael J. Wysocki
2012-08-07 12:28 ` Rafael J. Wysocki
2012-08-07 17:15 ` Alan Stern
2012-08-07 21:31 ` Rafael J. Wysocki
2012-08-03 14:05 ` Alan Stern
2012-08-04 20:08 ` Rafael J. Wysocki
2012-08-04 20:42 ` Alan Stern
2012-08-04 20:59 ` Rafael J. Wysocki
2012-08-04 19:35 ` Rafael J. Wysocki
2012-07-29 20:12 ` bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure Jassi Brar
2012-07-29 21:44 ` Alan Stern
2012-07-25 19:51 ` [PATCH] PCI / PM: Fix messages printed by acpi_pci_set_power_state() Rafael J. Wysocki
2012-07-25 20:02 ` Alan Stern
2012-07-25 20:48 ` [PATCH][update] " Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871ujtr7rz.fsf@nemi.mork.no \
--to=bjorn@mork.no \
--cc=bhelgaas@google.com \
--cc=huang.ying.caritas@gmail.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=stern@rowland.harvard.edu \
--cc=ying.huang@intel.com \
--cc=zheng.z.yan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.