From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: "Huang Ying" <ying.huang@intel.com>, "Bjørn Mork" <bjorn@mork.no>,
"huang ying" <huang.ying.caritas@gmail.com>,
"Zheng Yan" <zheng.z.yan@intel.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure
Date: Fri, 27 Jul 2012 21:11:29 +0200 [thread overview]
Message-ID: <201207272111.29289.rjw@sisk.pl> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1207271102010.2116-100000@iolanthe.rowland.org>
On Friday, July 27, 2012, Alan Stern wrote:
> On Fri, 27 Jul 2012, Huang Ying wrote:
>
> > --- a/drivers/pci/pci-driver.c
> > +++ b/drivers/pci/pci-driver.c
> > @@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi)
> > {
> > struct drv_dev_and_id *ddi = _ddi;
> > struct device *dev = &ddi->dev->dev;
> > + struct device *parent = dev->parent;
> > int rc;
> >
> > + /* The parent bridge must be in active state when probing */
> > + if (parent)
> > + pm_runtime_get_sync(parent);
>
> Ooh, this is a very good point. I completely missed it.
>
> > /* Unbound PCI devices are always set to disabled and suspended.
> > * During probe, the device is set to enabled and active and the
> > * usage count is incremented. If the driver supports runtime PM,
> > @@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi)
> > pm_runtime_set_suspended(dev);
> > pm_runtime_put_noidle(dev);
> > }
> > + if (parent)
> > + pm_runtime_put(parent);
>
> You should use pm_runtime_put_sync(), not pm_runtime_put().
Hmm, why exactly?
Rafael
next prev parent reply other threads:[~2012-07-27 19:05 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.44L0.1207241312050.1164-100000@iolanthe.rowland.org>
[not found] ` <87r4s0opck.fsf@nemi.mork.no>
2012-07-25 4:08 ` bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure Bjørn Mork
2012-07-25 4:34 ` Huang Ying
2012-07-25 9:58 ` Bjørn Mork
2012-07-25 13:30 ` huang ying
2012-07-25 13:58 ` Bjørn Mork
2012-07-25 18:56 ` Rafael J. Wysocki
2012-07-25 20:02 ` Rafael J. Wysocki
2012-07-25 22:36 ` Bjørn Mork
2012-07-26 2:38 ` Huang Ying
2012-07-26 2:38 ` Huang Ying
2012-07-26 8:54 ` Huang Ying
2012-07-26 10:35 ` Bjørn Mork
2012-07-26 11:02 ` Bjørn Mork
2012-07-26 12:04 ` Bjørn Mork
2012-07-26 15:03 ` Alan Stern
2012-07-26 16:24 ` Bjørn Mork
2012-07-27 5:35 ` Huang Ying
2012-07-27 9:11 ` Bjørn Mork
2012-07-30 3:15 ` Huang Ying
2012-07-30 8:08 ` Bjørn Mork
2012-07-30 13:31 ` huang ying
2012-07-30 16:57 ` Bjørn Mork
2012-07-31 0:22 ` Huang Ying
2012-07-30 14:19 ` Alan Stern
2012-07-31 0:24 ` Huang Ying
2012-07-31 3:18 ` Huang Ying
2012-07-31 17:07 ` Alan Stern
2012-07-27 15:03 ` Alan Stern
2012-07-27 19:11 ` Rafael J. Wysocki [this message]
2012-07-27 19:39 ` Alan Stern
2012-07-27 19:54 ` Rafael J. Wysocki
2012-07-28 16:12 ` Alan Stern
2012-07-28 20:26 ` Rafael J. Wysocki
2012-07-28 21:12 ` Alan Stern
2012-07-29 13:55 ` Rafael J. Wysocki
2012-07-29 14:55 ` Alan Stern
2012-07-29 19:18 ` Rafael J. Wysocki
2012-07-31 20:31 ` Do we need asynchronous pm_runtime_get()? (was: Re: bisected regression ...) Rafael J. Wysocki
2012-07-31 21:05 ` Alan Stern
2012-07-31 21:34 ` Rafael J. Wysocki
2012-07-31 21:49 ` Rafael J. Wysocki
2012-08-01 14:36 ` Alan Stern
2012-08-01 21:24 ` Rafael J. Wysocki
2012-08-02 20:16 ` Alan Stern
2012-08-02 21:26 ` Rafael J. Wysocki
2012-08-03 2:20 ` Alan Stern
2012-08-03 3:37 ` Ming Lei
2012-08-03 14:28 ` Alan Stern
2012-08-04 19:47 ` Rafael J. Wysocki
2012-08-04 20:25 ` Alan Stern
2012-08-04 20:48 ` Rafael J. Wysocki
2012-08-04 20:48 ` Alan Stern
2012-08-04 21:15 ` Rafael J. Wysocki
2012-08-04 22:13 ` Alan Stern
2012-08-05 15:26 ` Rafael J. Wysocki
2012-08-06 13:30 ` Ming Lei
2012-08-06 14:47 ` Alan Stern
2012-08-07 1:35 ` Ming Lei
2012-08-07 11:23 ` Rafael J. Wysocki
2012-08-07 15:14 ` Ming Lei
2012-08-07 15:42 ` Alan Stern
2012-08-07 16:30 ` Ming Lei
2012-08-07 20:57 ` Rafael J. Wysocki
2012-08-07 20:45 ` Rafael J. Wysocki
2012-08-08 2:02 ` Ming Lei
2012-08-08 18:42 ` Alan Stern
2012-08-08 20:16 ` Rafael J. Wysocki
2012-08-09 5:55 ` Ming Lei
2012-08-09 10:46 ` Rafael J. Wysocki
2012-08-09 10:55 ` Ming Lei
2012-08-09 19:41 ` Rafael J. Wysocki
2012-08-10 3:19 ` Ming Lei
2012-08-10 20:29 ` Rafael J. Wysocki
2012-08-08 22:27 ` Rafael J. Wysocki
2012-08-06 15:48 ` Alan Stern
2012-08-06 20:30 ` Rafael J. Wysocki
2012-08-07 12:28 ` Rafael J. Wysocki
2012-08-07 17:15 ` Alan Stern
2012-08-07 21:31 ` Rafael J. Wysocki
2012-08-03 14:05 ` Alan Stern
2012-08-04 20:08 ` Rafael J. Wysocki
2012-08-04 20:42 ` Alan Stern
2012-08-04 20:59 ` Rafael J. Wysocki
2012-08-04 19:35 ` Rafael J. Wysocki
2012-07-29 20:12 ` bisected regression, v3.5 -> next-20120724: PCI PM causes USB hotplug failure Jassi Brar
2012-07-29 21:44 ` Alan Stern
2012-07-25 19:51 ` [PATCH] PCI / PM: Fix messages printed by acpi_pci_set_power_state() Rafael J. Wysocki
2012-07-25 20:02 ` Alan Stern
2012-07-25 20:48 ` [PATCH][update] " Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207272111.29289.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=bhelgaas@google.com \
--cc=bjorn@mork.no \
--cc=huang.ying.caritas@gmail.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=ying.huang@intel.com \
--cc=zheng.z.yan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.