All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
	tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com,
	Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards
Date: Thu, 15 May 2014 20:34:20 +0530	[thread overview]
Message-ID: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com> (raw)

From: Rahul Sharma <Rahul.Sharma@samsung.com>

Enable hdmi for exynos5250 based snow board, exynos5420
based peach pit board and 5800 based peach-pi board.

V5:
1) Moved hdmi_hpd_irq pin back to board files.
2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
to HDMI node.

V4:
1) Removed hdmi_hpd_irq pin from peach-pi board as it already
present in exynos5420-pinctrl.dtsi.

V3:
1) Re-spin on dependent patches.
2) Added patch to enable hdmi for Peach-pi board.

V2:
1) Re-spin on dependent patches.
2) Added patch to remove chip specific hdmi hpd gpio from
board file top SoC file.

This series is based on Kukjin Kims, for-next branch.

It is dependent on

1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power regulator"
at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]

All other dependent patches are already landed in maintainers
tree.

Rahul Sharma (4):
  ARM: dts: enable hdmi for exynos5250 based snow board
  ARM: dts: change to correct compatible string for exynos5420 hdmi
  ARM: dts: enable hdmi for exynos5420 based peach-pit board
  ARM: dts: enable hdmi for exynos5800 based peach-pi board

 arch/arm/boot/dts/exynos5250-cros-common.dtsi |    6 +++++-
 arch/arm/boot/dts/exynos5250-snow.dts         |   14 ++++++++++++++
 arch/arm/boot/dts/exynos5420-peach-pit.dts    |   22 ++++++++++++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi             |    7 ++++++-
 arch/arm/boot/dts/exynos5800-peach-pi.dts     |   22 ++++++++++++++++++++++
 5 files changed, 69 insertions(+), 2 deletions(-)

-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: rahul.sharma@samsung.com (Rahul Sharma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards
Date: Thu, 15 May 2014 20:34:20 +0530	[thread overview]
Message-ID: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com> (raw)

From: Rahul Sharma <Rahul.Sharma@samsung.com>

Enable hdmi for exynos5250 based snow board, exynos5420
based peach pit board and 5800 based peach-pi board.

V5:
1) Moved hdmi_hpd_irq pin back to board files.
2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
to HDMI node.

V4:
1) Removed hdmi_hpd_irq pin from peach-pi board as it already
present in exynos5420-pinctrl.dtsi.

V3:
1) Re-spin on dependent patches.
2) Added patch to enable hdmi for Peach-pi board.

V2:
1) Re-spin on dependent patches.
2) Added patch to remove chip specific hdmi hpd gpio from
board file top SoC file.

This series is based on Kukjin Kims, for-next branch.

It is dependent on

1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power regulator"
at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]

All other dependent patches are already landed in maintainers
tree.

Rahul Sharma (4):
  ARM: dts: enable hdmi for exynos5250 based snow board
  ARM: dts: change to correct compatible string for exynos5420 hdmi
  ARM: dts: enable hdmi for exynos5420 based peach-pit board
  ARM: dts: enable hdmi for exynos5800 based peach-pi board

 arch/arm/boot/dts/exynos5250-cros-common.dtsi |    6 +++++-
 arch/arm/boot/dts/exynos5250-snow.dts         |   14 ++++++++++++++
 arch/arm/boot/dts/exynos5420-peach-pit.dts    |   22 ++++++++++++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi             |    7 ++++++-
 arch/arm/boot/dts/exynos5800-peach-pi.dts     |   22 ++++++++++++++++++++++
 5 files changed, 69 insertions(+), 2 deletions(-)

-- 
1.7.9.5

             reply	other threads:[~2014-05-15 15:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-15 15:04 Rahul Sharma [this message]
2014-05-15 15:04 ` [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 2/4] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 3/4] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 19:25 ` [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Tomasz Figa
2014-05-15 19:25   ` Tomasz Figa
2014-05-15 20:02   ` Kukjin Kim
2014-05-15 20:02     ` Kukjin Kim
2014-05-15 20:28     ` Kukjin Kim
2014-05-15 20:28       ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400166264-3428-1-git-send-email-rahul.sharma@samsung.com \
    --to=rahul.sharma@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=joshi@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=r.sh.open@gmail.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.