From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com,
Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board
Date: Thu, 15 May 2014 20:34:21 +0530 [thread overview]
Message-ID: <1400166264-3428-2-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com>
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable support for HDMI for exynos5250 based Snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++-
arch/arm/boot/dts/exynos5250-snow.dts | 14 ++++++++++++++
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..89ac90f 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -240,7 +240,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- hdmiphy@38 {
+ hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
@@ -304,6 +304,10 @@
hdmi {
hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
};
gpio-keys {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1ce1088..7aa5d11 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -37,6 +37,13 @@
sd3_bus4: sd3-bus-width4 {
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
};
gpio-keys {
@@ -206,4 +213,11 @@
clock-frequency = <24000000>;
};
};
+
+ hdmi {
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ };
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: rahul.sharma@samsung.com (Rahul Sharma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board
Date: Thu, 15 May 2014 20:34:21 +0530 [thread overview]
Message-ID: <1400166264-3428-2-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com>
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable support for HDMI for exynos5250 based Snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++-
arch/arm/boot/dts/exynos5250-snow.dts | 14 ++++++++++++++
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..89ac90f 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -240,7 +240,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- hdmiphy at 38 {
+ hdmiphy: hdmiphy at 38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
@@ -304,6 +304,10 @@
hdmi {
hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
};
gpio-keys {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1ce1088..7aa5d11 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -37,6 +37,13 @@
sd3_bus4: sd3-bus-width4 {
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
};
gpio-keys {
@@ -206,4 +213,11 @@
clock-frequency = <24000000>;
};
};
+
+ hdmi {
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ };
};
--
1.7.9.5
next prev parent reply other threads:[~2014-05-15 15:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-15 15:04 [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma [this message]
2014-05-15 15:04 ` [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 2/4] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 3/4] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma
2014-05-15 19:25 ` [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Tomasz Figa
2014-05-15 19:25 ` Tomasz Figa
2014-05-15 20:02 ` Kukjin Kim
2014-05-15 20:02 ` Kukjin Kim
2014-05-15 20:28 ` Kukjin Kim
2014-05-15 20:28 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400166264-3428-2-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.