All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
	tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com,
	Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board
Date: Thu, 15 May 2014 20:34:24 +0530	[thread overview]
Message-ID: <1400166264-3428-5-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com>

From: Rahul Sharma <Rahul.Sharma@samsung.com>

Enable hdmi for peach-pi board.

Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
 arch/arm/boot/dts/exynos5800-peach-pi.dts |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 742655b..5a44871 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -72,6 +72,13 @@
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
 };
 
 &rtc {
@@ -134,6 +141,21 @@
 	};
 };
 
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
 /*
  * Use longest HW watchdog in SoC (32 seconds) since the hardware
  * watchdog provides no debugging information (compared to soft/hard
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: rahul.sharma@samsung.com (Rahul Sharma)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board
Date: Thu, 15 May 2014 20:34:24 +0530	[thread overview]
Message-ID: <1400166264-3428-5-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com>

From: Rahul Sharma <Rahul.Sharma@samsung.com>

Enable hdmi for peach-pi board.

Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
 arch/arm/boot/dts/exynos5800-peach-pi.dts |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 742655b..5a44871 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -72,6 +72,13 @@
 		samsung,pin-pud = <0>;
 		samsung,pin-drv = <0>;
 	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
 };
 
 &rtc {
@@ -134,6 +141,21 @@
 	};
 };
 
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
 /*
  * Use longest HW watchdog in SoC (32 seconds) since the hardware
  * watchdog provides no debugging information (compared to soft/hard
-- 
1.7.9.5

  parent reply	other threads:[~2014-05-15 15:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-15 15:04 [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 2/4] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 3/4] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma [this message]
2014-05-15 15:04   ` [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-15 19:25 ` [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Tomasz Figa
2014-05-15 19:25   ` Tomasz Figa
2014-05-15 20:02   ` Kukjin Kim
2014-05-15 20:02     ` Kukjin Kim
2014-05-15 20:28     ` Kukjin Kim
2014-05-15 20:28       ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400166264-3428-5-git-send-email-rahul.sharma@samsung.com \
    --to=rahul.sharma@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=joshi@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=r.sh.open@gmail.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.