All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kukjin Kim <kgene.kim@samsung.com>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>,
	Rahul Sharma <rahul.sharma@samsung.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, inki.dae@samsung.com,
	joshi@samsung.com, r.sh.open@gmail.com
Subject: Re: [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards
Date: Fri, 16 May 2014 05:28:44 +0900	[thread overview]
Message-ID: <5375237C.20709@samsung.com> (raw)
In-Reply-To: <53751D5B.9040208@samsung.com>

On 05/16/14 05:02, Kukjin Kim wrote:
> On 05/16/14 04:25, Tomasz Figa wrote:
>> Hi Rahul,
>>
>> On 15.05.2014 17:04, Rahul Sharma wrote:
>>> From: Rahul Sharma<Rahul.Sharma@samsung.com>
>>>
>>> Enable hdmi for exynos5250 based snow board, exynos5420
>>> based peach pit board and 5800 based peach-pi board.
>>>
>>> V5:
>>> 1) Moved hdmi_hpd_irq pin back to board files.
>>> 2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
>>> to HDMI node.
>>>
>>> V4:
>>> 1) Removed hdmi_hpd_irq pin from peach-pi board as it already
>>> present in exynos5420-pinctrl.dtsi.
>>>
>>> V3:
>>> 1) Re-spin on dependent patches.
>>> 2) Added patch to enable hdmi for Peach-pi board.
>>>
>>> V2:
>>> 1) Re-spin on dependent patches.
>>> 2) Added patch to remove chip specific hdmi hpd gpio from
>>> board file top SoC file.
>>>
>>> This series is based on Kukjin Kims, for-next branch.
>>>
>>> It is dependent on
>>>
>>> 1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power
>>> regulator"
>>> at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]
>>>
>>> All other dependent patches are already landed in maintainers
>>> tree.
>>>
>>> Rahul Sharma (4):
>>> ARM: dts: enable hdmi for exynos5250 based snow board
>>> ARM: dts: change to correct compatible string for exynos5420 hdmi
>>> ARM: dts: enable hdmi for exynos5420 based peach-pit board
>>> ARM: dts: enable hdmi for exynos5800 based peach-pi board
>>>
>>> arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++-
>>> arch/arm/boot/dts/exynos5250-snow.dts | 14 ++++++++++++++
>>> arch/arm/boot/dts/exynos5420-peach-pit.dts | 22 ++++++++++++++++++++++
>>> arch/arm/boot/dts/exynos5420.dtsi | 7 ++++++-
>>> arch/arm/boot/dts/exynos5800-peach-pi.dts | 22 ++++++++++++++++++++++
>>> 5 files changed, 69 insertions(+), 2 deletions(-)
>>>
>>
>> For the whole series:
>>
>> Acked-by: Tomasz Figa<t.figa@samsung.com>
>>
> Looks good to me too.
>
> Applied but not for-next yet because need to check the status of the
> tps65090 related patches you mentioned...
>
Done.

Thanks,
Kukjin

WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards
Date: Fri, 16 May 2014 05:28:44 +0900	[thread overview]
Message-ID: <5375237C.20709@samsung.com> (raw)
In-Reply-To: <53751D5B.9040208@samsung.com>

On 05/16/14 05:02, Kukjin Kim wrote:
> On 05/16/14 04:25, Tomasz Figa wrote:
>> Hi Rahul,
>>
>> On 15.05.2014 17:04, Rahul Sharma wrote:
>>> From: Rahul Sharma<Rahul.Sharma@samsung.com>
>>>
>>> Enable hdmi for exynos5250 based snow board, exynos5420
>>> based peach pit board and 5800 based peach-pi board.
>>>
>>> V5:
>>> 1) Moved hdmi_hpd_irq pin back to board files.
>>> 2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
>>> to HDMI node.
>>>
>>> V4:
>>> 1) Removed hdmi_hpd_irq pin from peach-pi board as it already
>>> present in exynos5420-pinctrl.dtsi.
>>>
>>> V3:
>>> 1) Re-spin on dependent patches.
>>> 2) Added patch to enable hdmi for Peach-pi board.
>>>
>>> V2:
>>> 1) Re-spin on dependent patches.
>>> 2) Added patch to remove chip specific hdmi hpd gpio from
>>> board file top SoC file.
>>>
>>> This series is based on Kukjin Kims, for-next branch.
>>>
>>> It is dependent on
>>>
>>> 1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power
>>> regulator"
>>> at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]
>>>
>>> All other dependent patches are already landed in maintainers
>>> tree.
>>>
>>> Rahul Sharma (4):
>>> ARM: dts: enable hdmi for exynos5250 based snow board
>>> ARM: dts: change to correct compatible string for exynos5420 hdmi
>>> ARM: dts: enable hdmi for exynos5420 based peach-pit board
>>> ARM: dts: enable hdmi for exynos5800 based peach-pi board
>>>
>>> arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++-
>>> arch/arm/boot/dts/exynos5250-snow.dts | 14 ++++++++++++++
>>> arch/arm/boot/dts/exynos5420-peach-pit.dts | 22 ++++++++++++++++++++++
>>> arch/arm/boot/dts/exynos5420.dtsi | 7 ++++++-
>>> arch/arm/boot/dts/exynos5800-peach-pi.dts | 22 ++++++++++++++++++++++
>>> 5 files changed, 69 insertions(+), 2 deletions(-)
>>>
>>
>> For the whole series:
>>
>> Acked-by: Tomasz Figa<t.figa@samsung.com>
>>
> Looks good to me too.
>
> Applied but not for-next yet because need to check the status of the
> tps65090 related patches you mentioned...
>
Done.

Thanks,
Kukjin

  reply	other threads:[~2014-05-15 20:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-15 15:04 [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 2/4] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 3/4] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-15 15:04   ` Rahul Sharma
2014-05-15 19:25 ` [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Tomasz Figa
2014-05-15 19:25   ` Tomasz Figa
2014-05-15 20:02   ` Kukjin Kim
2014-05-15 20:02     ` Kukjin Kim
2014-05-15 20:28     ` Kukjin Kim [this message]
2014-05-15 20:28       ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5375237C.20709@samsung.com \
    --to=kgene.kim@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=joshi@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=r.sh.open@gmail.com \
    --cc=rahul.sharma@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.