All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: <linux-clk@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<sboyd@codeaurora.org>, <mturquette@linaro.org>,
	<tony@atomide.com>, <paul@pwsan.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Subject: [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code
Date: Mon, 25 May 2015 18:00:21 +0300	[thread overview]
Message-ID: <1432566032-10860-17-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>

clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |   34 ++++++++++------------------------
 arch/arm/mach-omap2/clock.h |    2 --
 include/linux/clk/ti.h      |    1 +
 3 files changed, 11 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a5713d..6c17adf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -61,14 +61,6 @@ u16 cpu_mask;
 #define OMAP3PLUS_DPLL_FINT_MIN		32000
 #define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
 struct clk_iomap {
 	struct regmap *regmap;
 	void __iomem *mem;
@@ -288,19 +280,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 }
 
 /**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init().  No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
-	clkdm_control = false;
-}
-
-/**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
  * @clk: struct clk * to find the companion clock of
  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -384,6 +363,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	struct clk_hw_omap *clk;
 	u32 v;
 	int ret = 0;
+	bool clkdm_control;
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+		clkdm_control = false;
+	else
+		clkdm_control = true;
 
 	clk = to_clk_hw_omap(hw);
 
@@ -457,7 +442,8 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 	omap2_clk_writel(v, clk, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
-	if (clkdm_control && clk->clkdm)
+	if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+	    clk->clkdm)
 		clkdm_clk_disable(clk->clkdm, hw->clk);
 }
 
@@ -490,7 +476,7 @@ int omap2_clkops_enable_clkdm(struct clk_hw *hw)
 		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
 		       __clk_get_name(hw->clk));
 
-	if (!clkdm_control) {
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
 		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
 		       __func__, __clk_get_name(hw->clk));
 		return 0;
@@ -528,7 +514,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
 		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
 		       __clk_get_name(hw->clk));
 
-	if (!clkdm_control) {
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
 		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
 		       __func__, __clk_get_name(hw->clk));
 		return;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d60691d..9480654 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,8 +180,6 @@ struct clksel {
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-void __init omap2_clk_disable_clkdm_control(void);
-
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0f9d15f..3dadb74 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -330,6 +330,7 @@ struct ti_clk_features {
 
 #define TI_CLK_DPLL_HAS_FREQSEL			BIT(0)
 #define TI_CLK_DPLL4_DENY_REPROGRAM		BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL		BIT(2)
 
 void ti_clk_setup_features(struct ti_clk_features *features);
 struct ti_clk_features *ti_clk_get_features(void);
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com>
To: linux-clk@vger.kernel.org, linux-omap@vger.kernel.org,
	sboyd@codeaurora.org, mturquette@linaro.org, tony@atomide.com,
	paul@pwsan.com
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code
Date: Mon, 25 May 2015 18:00:21 +0300	[thread overview]
Message-ID: <1432566032-10860-17-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>

clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |   34 ++++++++++------------------------
 arch/arm/mach-omap2/clock.h |    2 --
 include/linux/clk/ti.h      |    1 +
 3 files changed, 11 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a5713d..6c17adf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -61,14 +61,6 @@ u16 cpu_mask;
 #define OMAP3PLUS_DPLL_FINT_MIN		32000
 #define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
 struct clk_iomap {
 	struct regmap *regmap;
 	void __iomem *mem;
@@ -288,19 +280,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 }
 
 /**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init().  No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
-	clkdm_control = false;
-}
-
-/**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
  * @clk: struct clk * to find the companion clock of
  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -384,6 +363,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	struct clk_hw_omap *clk;
 	u32 v;
 	int ret = 0;
+	bool clkdm_control;
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+		clkdm_control = false;
+	else
+		clkdm_control = true;
 
 	clk = to_clk_hw_omap(hw);
 
@@ -457,7 +442,8 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 	omap2_clk_writel(v, clk, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
-	if (clkdm_control && clk->clkdm)
+	if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+	    clk->clkdm)
 		clkdm_clk_disable(clk->clkdm, hw->clk);
 }
 
@@ -490,7 +476,7 @@ int omap2_clkops_enable_clkdm(struct clk_hw *hw)
 		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
 		       __clk_get_name(hw->clk));
 
-	if (!clkdm_control) {
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
 		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
 		       __func__, __clk_get_name(hw->clk));
 		return 0;
@@ -528,7 +514,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
 		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
 		       __clk_get_name(hw->clk));
 
-	if (!clkdm_control) {
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
 		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
 		       __func__, __clk_get_name(hw->clk));
 		return;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d60691d..9480654 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,8 +180,6 @@ struct clksel {
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-void __init omap2_clk_disable_clkdm_control(void);
-
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0f9d15f..3dadb74 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -330,6 +330,7 @@ struct ti_clk_features {
 
 #define TI_CLK_DPLL_HAS_FREQSEL			BIT(0)
 #define TI_CLK_DPLL4_DENY_REPROGRAM		BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL		BIT(2)
 
 void ti_clk_setup_features(struct ti_clk_features *features);
 struct ti_clk_features *ti_clk_get_features(void);
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code
Date: Mon, 25 May 2015 18:00:21 +0300	[thread overview]
Message-ID: <1432566032-10860-17-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>

clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |   34 ++++++++++------------------------
 arch/arm/mach-omap2/clock.h |    2 --
 include/linux/clk/ti.h      |    1 +
 3 files changed, 11 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a5713d..6c17adf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -61,14 +61,6 @@ u16 cpu_mask;
 #define OMAP3PLUS_DPLL_FINT_MIN		32000
 #define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
 struct clk_iomap {
 	struct regmap *regmap;
 	void __iomem *mem;
@@ -288,19 +280,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 }
 
 /**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init().  No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
-	clkdm_control = false;
-}
-
-/**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
  * @clk: struct clk * to find the companion clock of
  * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -384,6 +363,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
 	struct clk_hw_omap *clk;
 	u32 v;
 	int ret = 0;
+	bool clkdm_control;
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+		clkdm_control = false;
+	else
+		clkdm_control = true;
 
 	clk = to_clk_hw_omap(hw);
 
@@ -457,7 +442,8 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
 	omap2_clk_writel(v, clk, clk->enable_reg);
 	/* No OCP barrier needed here since it is a disable operation */
 
-	if (clkdm_control && clk->clkdm)
+	if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+	    clk->clkdm)
 		clkdm_clk_disable(clk->clkdm, hw->clk);
 }
 
@@ -490,7 +476,7 @@ int omap2_clkops_enable_clkdm(struct clk_hw *hw)
 		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
 		       __clk_get_name(hw->clk));
 
-	if (!clkdm_control) {
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
 		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
 		       __func__, __clk_get_name(hw->clk));
 		return 0;
@@ -528,7 +514,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
 		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
 		       __clk_get_name(hw->clk));
 
-	if (!clkdm_control) {
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
 		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
 		       __func__, __clk_get_name(hw->clk));
 		return;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d60691d..9480654 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,8 +180,6 @@ struct clksel {
 #define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP4XXX_EN_DPLL_LOCKED			0x7
 
-void __init omap2_clk_disable_clkdm_control(void);
-
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 			       const char *core_ck_name,
 			       const char *mpu_ck_name);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0f9d15f..3dadb74 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -330,6 +330,7 @@ struct ti_clk_features {
 
 #define TI_CLK_DPLL_HAS_FREQSEL			BIT(0)
 #define TI_CLK_DPLL4_DENY_REPROGRAM		BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL		BIT(2)
 
 void ti_clk_setup_features(struct ti_clk_features *features);
 struct ti_clk_features *ti_clk_get_features(void);
-- 
1.7.9.5

  parent reply	other threads:[~2015-05-25 15:00 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-25 15:00 [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-28 22:04   ` Stephen Boyd
2015-05-28 22:04     ` Stephen Boyd
2015-06-02 10:22     ` Tero Kristo
2015-06-02 10:22       ` Tero Kristo
2015-06-02 10:22       ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-28 22:03   ` Stephen Boyd
2015-05-28 22:03     ` Stephen Boyd
2015-05-25 15:00 ` [PATCHv3 03/27] clk: ti: move OMAP4+ " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 04/27] clk: ti: move interface clock " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 10/27] clk: ti: move omap2_clk_enable_init_clocks under " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 15/27] ARM: OMAP3: clock: remove clock3xxx.c file Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo [this message]
2015-05-25 15:00   ` [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 17/27] clk: ti: dflt: move support for default gate clock to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 18/27] clk: ti: omap2430: move clock support code under " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 20/27] clk: ti: omap34xx: move omap34xx clock type " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 21/27] ARM: OMAP4: clock: remove clock44xx.h header Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 23/27] clk: ti: move some public definitions to private header Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 27/27] clk: ti: move low-level access and init code under clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-26 16:05 ` [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tony Lindgren
2015-05-26 16:05   ` Tony Lindgren
2015-05-26 16:32   ` Tony Lindgren
2015-05-26 16:32     ` Tony Lindgren
2015-05-26 16:39     ` Felipe Balbi
2015-05-26 16:39       ` Felipe Balbi
2015-05-26 16:39       ` Felipe Balbi
2015-05-27 18:30       ` Tero Kristo
2015-05-27 18:30         ` Tero Kristo
2015-05-27 18:30         ` Tero Kristo
2015-05-27 23:15         ` Tony Lindgren
2015-05-27 23:15           ` Tony Lindgren
2015-06-03 12:33           ` Tero Kristo
2015-06-03 12:33             ` Tero Kristo
2015-06-03 12:33             ` Tero Kristo
2015-06-03 23:11             ` Michael Turquette
2015-06-03 23:11               ` Michael Turquette
2015-06-03 23:11               ` Michael Turquette
2015-06-04  5:26               ` Tero Kristo
2015-06-04  5:26                 ` Tero Kristo
2015-06-04  5:26                 ` Tero Kristo
2015-07-13  9:48               ` Tero Kristo
2015-07-13  9:48                 ` Tero Kristo
2015-07-13  9:48                 ` Tero Kristo
2015-07-13 20:26                 ` Stephen Boyd
2015-07-13 20:26                   ` Stephen Boyd
2015-07-13 20:26                   ` Stephen Boyd
2015-05-26 17:41     ` Tero Kristo
2015-05-26 17:41       ` Tero Kristo
2015-05-26 17:41       ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432566032-10860-17-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=paul@pwsan.com \
    --cc=sboyd@codeaurora.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.