All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: <linux-clk@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<sboyd@codeaurora.org>, <mturquette@linaro.org>,
	<tony@atomide.com>, <paul@pwsan.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Subject: [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to clock driver
Date: Mon, 25 May 2015 18:00:24 +0300	[thread overview]
Message-ID: <1432566032-10860-20-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>

With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c  |   76 ------------------------------------------
 arch/arm/mach-omap2/clock.h  |    3 --
 drivers/clk/ti/clock.h       |    3 ++
 drivers/clk/ti/clockdomain.c |   76 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h       |    2 --
 5 files changed, 79 insertions(+), 81 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a336b..99875db 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -202,82 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer.  Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return -EINVAL;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return 0;
-	}
-
-	ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
-	     __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
-	return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer.  No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
 static int __initdata mpurate;
 
 /*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9480654..a7e9511 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -202,9 +202,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
 
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
 struct regmap;
 
 int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3652c26..83476d1 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -180,6 +180,9 @@ extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
 
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
 int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 35fe108..61ef87b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -24,6 +24,82 @@
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer.  Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+	int ret = 0;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return 0;
+	}
+
+	ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+	     __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+	return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer.  No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return;
+	}
+
+	ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
 static void __init of_ti_clockdomain_setup(struct device_node *node)
 {
 	struct clk *clk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a7728f7..6361f21 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -272,8 +272,6 @@ extern const struct clk_ops ti_clk_mux_ops;
 #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
 
 void omap2_init_clk_clkdm(struct clk_hw *clk);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com>
To: linux-clk@vger.kernel.org, linux-omap@vger.kernel.org,
	sboyd@codeaurora.org, mturquette@linaro.org, tony@atomide.com,
	paul@pwsan.com
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to clock driver
Date: Mon, 25 May 2015 18:00:24 +0300	[thread overview]
Message-ID: <1432566032-10860-20-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>

With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c  |   76 ------------------------------------------
 arch/arm/mach-omap2/clock.h  |    3 --
 drivers/clk/ti/clock.h       |    3 ++
 drivers/clk/ti/clockdomain.c |   76 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h       |    2 --
 5 files changed, 79 insertions(+), 81 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a336b..99875db 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -202,82 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer.  Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return -EINVAL;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return 0;
-	}
-
-	ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
-	     __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
-	return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer.  No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
 static int __initdata mpurate;
 
 /*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9480654..a7e9511 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -202,9 +202,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
 
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
 struct regmap;
 
 int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3652c26..83476d1 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -180,6 +180,9 @@ extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
 
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
 int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 35fe108..61ef87b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -24,6 +24,82 @@
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer.  Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+	int ret = 0;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return 0;
+	}
+
+	ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+	     __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+	return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer.  No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return;
+	}
+
+	ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
 static void __init of_ti_clockdomain_setup(struct device_node *node)
 {
 	struct clk *clk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a7728f7..6361f21 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -272,8 +272,6 @@ extern const struct clk_ops ti_clk_mux_ops;
 #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
 
 void omap2_init_clk_clkdm(struct clk_hw *clk);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to clock driver
Date: Mon, 25 May 2015 18:00:24 +0300	[thread overview]
Message-ID: <1432566032-10860-20-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>

With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c  |   76 ------------------------------------------
 arch/arm/mach-omap2/clock.h  |    3 --
 drivers/clk/ti/clock.h       |    3 ++
 drivers/clk/ti/clockdomain.c |   76 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/ti.h       |    2 --
 5 files changed, 79 insertions(+), 81 deletions(-)

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a336b..99875db 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -202,82 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer.  Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return -EINVAL;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return 0;
-	}
-
-	ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
-	     __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
-	return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer.  No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
 static int __initdata mpurate;
 
 /*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9480654..a7e9511 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -202,9 +202,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
 
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
 struct regmap;
 
 int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3652c26..83476d1 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -180,6 +180,9 @@ extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
 
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
 int omap2_dflt_clk_enable(struct clk_hw *hw);
 void omap2_dflt_clk_disable(struct clk_hw *hw);
 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 35fe108..61ef87b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -24,6 +24,82 @@
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer.  Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+	int ret = 0;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return -EINVAL;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return 0;
+	}
+
+	ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+	     __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+	return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer.  No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk;
+
+	clk = to_clk_hw_omap(hw);
+
+	if (unlikely(!clk->clkdm)) {
+		pr_err("%s: %s: no clkdm set ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+		return;
+	}
+
+	if (unlikely(clk->enable_reg))
+		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+		       __clk_get_name(hw->clk));
+
+	if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+		       __func__, __clk_get_name(hw->clk));
+		return;
+	}
+
+	ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
 static void __init of_ti_clockdomain_setup(struct device_node *node)
 {
 	struct clk *clk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a7728f7..6361f21 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -272,8 +272,6 @@ extern const struct clk_ops ti_clk_mux_ops;
 #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
 
 void omap2_init_clk_clkdm(struct clk_hw *clk);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap2_clk_disable_autoidle_all(void);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_allow_idle(struct clk *clk);
-- 
1.7.9.5

  parent reply	other threads:[~2015-05-25 15:00 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-25 15:00 [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-28 22:04   ` Stephen Boyd
2015-05-28 22:04     ` Stephen Boyd
2015-06-02 10:22     ` Tero Kristo
2015-06-02 10:22       ` Tero Kristo
2015-06-02 10:22       ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-28 22:03   ` Stephen Boyd
2015-05-28 22:03     ` Stephen Boyd
2015-05-25 15:00 ` [PATCHv3 03/27] clk: ti: move OMAP4+ " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 04/27] clk: ti: move interface clock " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 10/27] clk: ti: move omap2_clk_enable_init_clocks under " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 15/27] ARM: OMAP3: clock: remove clock3xxx.c file Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 17/27] clk: ti: dflt: move support for default gate clock to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 18/27] clk: ti: omap2430: move clock support code under " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo [this message]
2015-05-25 15:00   ` [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 20/27] clk: ti: omap34xx: move omap34xx clock type " Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 21/27] ARM: OMAP4: clock: remove clock44xx.h header Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 23/27] clk: ti: move some public definitions to private header Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 27/27] clk: ti: move low-level access and init code under clock driver Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-25 15:00   ` Tero Kristo
2015-05-26 16:05 ` [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tony Lindgren
2015-05-26 16:05   ` Tony Lindgren
2015-05-26 16:32   ` Tony Lindgren
2015-05-26 16:32     ` Tony Lindgren
2015-05-26 16:39     ` Felipe Balbi
2015-05-26 16:39       ` Felipe Balbi
2015-05-26 16:39       ` Felipe Balbi
2015-05-27 18:30       ` Tero Kristo
2015-05-27 18:30         ` Tero Kristo
2015-05-27 18:30         ` Tero Kristo
2015-05-27 23:15         ` Tony Lindgren
2015-05-27 23:15           ` Tony Lindgren
2015-06-03 12:33           ` Tero Kristo
2015-06-03 12:33             ` Tero Kristo
2015-06-03 12:33             ` Tero Kristo
2015-06-03 23:11             ` Michael Turquette
2015-06-03 23:11               ` Michael Turquette
2015-06-03 23:11               ` Michael Turquette
2015-06-04  5:26               ` Tero Kristo
2015-06-04  5:26                 ` Tero Kristo
2015-06-04  5:26                 ` Tero Kristo
2015-07-13  9:48               ` Tero Kristo
2015-07-13  9:48                 ` Tero Kristo
2015-07-13  9:48                 ` Tero Kristo
2015-07-13 20:26                 ` Stephen Boyd
2015-07-13 20:26                   ` Stephen Boyd
2015-07-13 20:26                   ` Stephen Boyd
2015-05-26 17:41     ` Tero Kristo
2015-05-26 17:41       ` Tero Kristo
2015-05-26 17:41       ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432566032-10860-20-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=paul@pwsan.com \
    --cc=sboyd@codeaurora.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.