From: Tero Kristo <t-kristo@ti.com>
To: <linux-clk@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<sboyd@codeaurora.org>, <mturquette@linaro.org>,
<tony@atomide.com>, <paul@pwsan.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Subject: [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file
Date: Mon, 25 May 2015 18:00:12 +0300 [thread overview]
Message-ID: <1432566032-10860-8-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.h | 14 ----
arch/arm/mach-omap2/clock_common_data.c | 115 -------------------------------
3 files changed, 1 insertion(+), 130 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock_common_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d03bc21..98d5030 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,7 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9efff4b..b71d430 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -204,11 +204,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
@@ -217,15 +212,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60df..0000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com>
To: linux-clk@vger.kernel.org, linux-omap@vger.kernel.org,
sboyd@codeaurora.org, mturquette@linaro.org, tony@atomide.com,
paul@pwsan.com
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file
Date: Mon, 25 May 2015 18:00:12 +0300 [thread overview]
Message-ID: <1432566032-10860-8-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.h | 14 ----
arch/arm/mach-omap2/clock_common_data.c | 115 -------------------------------
3 files changed, 1 insertion(+), 130 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock_common_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d03bc21..98d5030 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,7 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9efff4b..b71d430 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -204,11 +204,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
@@ -217,15 +212,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60df..0000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file
Date: Mon, 25 May 2015 18:00:12 +0300 [thread overview]
Message-ID: <1432566032-10860-8-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.h | 14 ----
arch/arm/mach-omap2/clock_common_data.c | 115 -------------------------------
3 files changed, 1 insertion(+), 130 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock_common_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d03bc21..98d5030 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,7 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9efff4b..b71d430 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -204,11 +204,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
@@ -217,15 +212,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60df..0000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
--
1.7.9.5
next prev parent reply other threads:[~2015-05-25 15:00 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-25 15:00 [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-28 22:04 ` Stephen Boyd
2015-05-28 22:04 ` Stephen Boyd
2015-06-02 10:22 ` Tero Kristo
2015-06-02 10:22 ` Tero Kristo
2015-06-02 10:22 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-28 22:03 ` Stephen Boyd
2015-05-28 22:03 ` Stephen Boyd
2015-05-25 15:00 ` [PATCHv3 03/27] clk: ti: move OMAP4+ " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 04/27] clk: ti: move interface clock " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo [this message]
2015-05-25 15:00 ` [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 10/27] clk: ti: move omap2_clk_enable_init_clocks under " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 15/27] ARM: OMAP3: clock: remove clock3xxx.c file Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 17/27] clk: ti: dflt: move support for default gate clock to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 18/27] clk: ti: omap2430: move clock support code under " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 20/27] clk: ti: omap34xx: move omap34xx clock type " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 21/27] ARM: OMAP4: clock: remove clock44xx.h header Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 23/27] clk: ti: move some public definitions to private header Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 27/27] clk: ti: move low-level access and init code under clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-26 16:05 ` [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tony Lindgren
2015-05-26 16:05 ` Tony Lindgren
2015-05-26 16:32 ` Tony Lindgren
2015-05-26 16:32 ` Tony Lindgren
2015-05-26 16:39 ` Felipe Balbi
2015-05-26 16:39 ` Felipe Balbi
2015-05-26 16:39 ` Felipe Balbi
2015-05-27 18:30 ` Tero Kristo
2015-05-27 18:30 ` Tero Kristo
2015-05-27 18:30 ` Tero Kristo
2015-05-27 23:15 ` Tony Lindgren
2015-05-27 23:15 ` Tony Lindgren
2015-06-03 12:33 ` Tero Kristo
2015-06-03 12:33 ` Tero Kristo
2015-06-03 12:33 ` Tero Kristo
2015-06-03 23:11 ` Michael Turquette
2015-06-03 23:11 ` Michael Turquette
2015-06-03 23:11 ` Michael Turquette
2015-06-04 5:26 ` Tero Kristo
2015-06-04 5:26 ` Tero Kristo
2015-06-04 5:26 ` Tero Kristo
2015-07-13 9:48 ` Tero Kristo
2015-07-13 9:48 ` Tero Kristo
2015-07-13 9:48 ` Tero Kristo
2015-07-13 20:26 ` Stephen Boyd
2015-07-13 20:26 ` Stephen Boyd
2015-07-13 20:26 ` Stephen Boyd
2015-05-26 17:41 ` Tero Kristo
2015-05-26 17:41 ` Tero Kristo
2015-05-26 17:41 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432566032-10860-8-git-send-email-t-kristo@ti.com \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=paul@pwsan.com \
--cc=sboyd@codeaurora.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.