From: Tero Kristo <t-kristo@ti.com>
To: <linux-clk@vger.kernel.org>, <linux-omap@vger.kernel.org>,
<sboyd@codeaurora.org>, <mturquette@linaro.org>,
<tony@atomide.com>, <paul@pwsan.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Subject: [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
Date: Mon, 25 May 2015 18:00:06 +0300 [thread overview]
Message-ID: <1432566032-10860-2-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 14 +++++++-------
arch/arm/mach-omap2/clock.c | 36 +++++++++++++++++-------------------
arch/arm/mach-omap2/clock.h | 18 ------------------
arch/arm/mach-omap2/clock3xxx.c | 4 ++--
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
drivers/clk/ti/clk.c | 25 +++++++++++++++++++++++++
include/linux/clk/ti.h | 16 ++++++++++++++++
7 files changed, 69 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14..82f0600 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d71..cbc65b3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0a..ac21856 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db..8bede6a 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec..9a80f59 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 0ebe5c5..567f8b9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -30,6 +30,8 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -310,4 +312,27 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 79b76e1..b066835 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -338,6 +338,22 @@ int am43xx_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+struct ti_clk_features *ti_clk_get_features(void);
+
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com>
To: linux-clk@vger.kernel.org, linux-omap@vger.kernel.org,
sboyd@codeaurora.org, mturquette@linaro.org, tony@atomide.com,
paul@pwsan.com
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
Date: Mon, 25 May 2015 18:00:06 +0300 [thread overview]
Message-ID: <1432566032-10860-2-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 14 +++++++-------
arch/arm/mach-omap2/clock.c | 36 +++++++++++++++++-------------------
arch/arm/mach-omap2/clock.h | 18 ------------------
arch/arm/mach-omap2/clock3xxx.c | 4 ++--
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
drivers/clk/ti/clk.c | 25 +++++++++++++++++++++++++
include/linux/clk/ti.h | 16 ++++++++++++++++
7 files changed, 69 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14..82f0600 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d71..cbc65b3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0a..ac21856 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db..8bede6a 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec..9a80f59 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 0ebe5c5..567f8b9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -30,6 +30,8 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -310,4 +312,27 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 79b76e1..b066835 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -338,6 +338,22 @@ int am43xx_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+struct ti_clk_features *ti_clk_get_features(void);
+
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: t-kristo@ti.com (Tero Kristo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
Date: Mon, 25 May 2015 18:00:06 +0300 [thread overview]
Message-ID: <1432566032-10860-2-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1432566032-10860-1-git-send-email-t-kristo@ti.com>
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 14 +++++++-------
arch/arm/mach-omap2/clock.c | 36 +++++++++++++++++-------------------
arch/arm/mach-omap2/clock.h | 18 ------------------
arch/arm/mach-omap2/clock3xxx.c | 4 ++--
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
drivers/clk/ti/clk.c | 25 +++++++++++++++++++++++++
include/linux/clk/ti.h | 16 ++++++++++++++++
7 files changed, 69 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14..82f0600 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d71..cbc65b3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0a..ac21856 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db..8bede6a 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec..9a80f59 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 0ebe5c5..567f8b9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -30,6 +30,8 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -310,4 +312,27 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 79b76e1..b066835 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -338,6 +338,22 @@ int am43xx_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+struct ti_clk_features *ti_clk_get_features(void);
+
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
--
1.7.9.5
next prev parent reply other threads:[~2015-05-25 15:00 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-25 15:00 [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo [this message]
2015-05-25 15:00 ` [PATCHv3 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-28 22:04 ` Stephen Boyd
2015-05-28 22:04 ` Stephen Boyd
2015-06-02 10:22 ` Tero Kristo
2015-06-02 10:22 ` Tero Kristo
2015-06-02 10:22 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-28 22:03 ` Stephen Boyd
2015-05-28 22:03 ` Stephen Boyd
2015-05-25 15:00 ` [PATCHv3 03/27] clk: ti: move OMAP4+ " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 04/27] clk: ti: move interface clock " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 10/27] clk: ti: move omap2_clk_enable_init_clocks under " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 15/27] ARM: OMAP3: clock: remove clock3xxx.c file Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 17/27] clk: ti: dflt: move support for default gate clock to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 18/27] clk: ti: omap2430: move clock support code under " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 19/27] clk: ti: clkdm: move clkdm gate clock support code to " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 20/27] clk: ti: omap34xx: move omap34xx clock type " Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 21/27] ARM: OMAP4: clock: remove clock44xx.h header Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 23/27] clk: ti: move some public definitions to private header Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` [PATCHv3 27/27] clk: ti: move low-level access and init code under clock driver Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-25 15:00 ` Tero Kristo
2015-05-26 16:05 ` [PATCHv3 00/27] ARM: OMAP2+: clock code move under clk driver Tony Lindgren
2015-05-26 16:05 ` Tony Lindgren
2015-05-26 16:32 ` Tony Lindgren
2015-05-26 16:32 ` Tony Lindgren
2015-05-26 16:39 ` Felipe Balbi
2015-05-26 16:39 ` Felipe Balbi
2015-05-26 16:39 ` Felipe Balbi
2015-05-27 18:30 ` Tero Kristo
2015-05-27 18:30 ` Tero Kristo
2015-05-27 18:30 ` Tero Kristo
2015-05-27 23:15 ` Tony Lindgren
2015-05-27 23:15 ` Tony Lindgren
2015-06-03 12:33 ` Tero Kristo
2015-06-03 12:33 ` Tero Kristo
2015-06-03 12:33 ` Tero Kristo
2015-06-03 23:11 ` Michael Turquette
2015-06-03 23:11 ` Michael Turquette
2015-06-03 23:11 ` Michael Turquette
2015-06-04 5:26 ` Tero Kristo
2015-06-04 5:26 ` Tero Kristo
2015-06-04 5:26 ` Tero Kristo
2015-07-13 9:48 ` Tero Kristo
2015-07-13 9:48 ` Tero Kristo
2015-07-13 9:48 ` Tero Kristo
2015-07-13 20:26 ` Stephen Boyd
2015-07-13 20:26 ` Stephen Boyd
2015-07-13 20:26 ` Stephen Boyd
2015-05-26 17:41 ` Tero Kristo
2015-05-26 17:41 ` Tero Kristo
2015-05-26 17:41 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432566032-10860-2-git-send-email-t-kristo@ti.com \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=paul@pwsan.com \
--cc=sboyd@codeaurora.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.