From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> To: linux-renesas-soc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org, Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Subject: [PATCH 0/5] R-Car D3 LVDS/HDMI support Date: Tue, 15 May 2018 14:20:35 +0200 [thread overview] Message-ID: <1526386840-15368-1-git-send-email-ulrich.hecht+renesas@gmail.com> (raw) Hi! This adds D3 support to the DU and LVDS drivers, not including LVDS PLL support. It also adds LVDS encoders to the D3 device tree, and LVDS decoder, HDMI encoder and HDMI output connector to the Draak device tree. In theory that should be good enough to provide HDMI output on the Draak board, but in practice the lack of LVDS PLL support prevents generation of close-enough dot clock frequencies. This series is based on renesas-drivers-2018-05-02-v4.17-rc3 and requires Jacopo's "drm: bridge: Add thc63lvd1024 LVDS decoder driver" patch. CU Uli Kieran Bingham (1): arm64: dts: renesas: r8a77995: Add LVDS support Koji Matsuoka (1): drm: rcar-du: Add r8a77995 device support Ulrich Hecht (3): drm: rcar-du: lvds: Add R8A77995 support arm64: dts: renesas: r8a77995-draak: add HDMI output arm64: dts: renesas: r8a77995-draak: add X12 input dot clock arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 91 ++++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77995.dtsi | 56 ++++++++++++++++ drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++ drivers/gpu/drm/rcar-du/rcar_lvds.c | 6 ++ 4 files changed, 179 insertions(+) -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> To: linux-renesas-soc@vger.kernel.org Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>, dri-devel@lists.freedesktop.org Subject: [PATCH 0/5] R-Car D3 LVDS/HDMI support Date: Tue, 15 May 2018 14:20:35 +0200 [thread overview] Message-ID: <1526386840-15368-1-git-send-email-ulrich.hecht+renesas@gmail.com> (raw) Hi! This adds D3 support to the DU and LVDS drivers, not including LVDS PLL support. It also adds LVDS encoders to the D3 device tree, and LVDS decoder, HDMI encoder and HDMI output connector to the Draak device tree. In theory that should be good enough to provide HDMI output on the Draak board, but in practice the lack of LVDS PLL support prevents generation of close-enough dot clock frequencies. This series is based on renesas-drivers-2018-05-02-v4.17-rc3 and requires Jacopo's "drm: bridge: Add thc63lvd1024 LVDS decoder driver" patch. CU Uli Kieran Bingham (1): arm64: dts: renesas: r8a77995: Add LVDS support Koji Matsuoka (1): drm: rcar-du: Add r8a77995 device support Ulrich Hecht (3): drm: rcar-du: lvds: Add R8A77995 support arm64: dts: renesas: r8a77995-draak: add HDMI output arm64: dts: renesas: r8a77995-draak: add X12 input dot clock arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 91 ++++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77995.dtsi | 56 ++++++++++++++++ drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++ drivers/gpu/drm/rcar-du/rcar_lvds.c | 6 ++ 4 files changed, 179 insertions(+) -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2018-05-15 12:20 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-15 12:20 Ulrich Hecht [this message] 2018-05-15 12:20 ` [PATCH 0/5] R-Car D3 LVDS/HDMI support Ulrich Hecht 2018-05-15 12:20 ` [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:03 ` Simon Horman 2018-05-16 8:03 ` Simon Horman 2018-05-20 8:22 ` Laurent Pinchart 2018-05-20 8:22 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 7:54 ` Simon Horman 2018-05-16 7:54 ` Simon Horman 2018-05-16 8:59 ` Sergei Shtylyov 2018-05-16 8:59 ` Sergei Shtylyov 2018-05-16 13:06 ` Ulrich Hecht 2018-05-16 13:06 ` Ulrich Hecht 2018-05-16 17:07 ` Sergei Shtylyov 2018-05-16 17:07 ` Sergei Shtylyov 2018-05-17 8:59 ` Simon Horman 2018-05-17 8:59 ` Simon Horman 2018-05-20 8:45 ` Laurent Pinchart 2018-05-20 8:45 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:16 ` Simon Horman 2018-05-16 8:16 ` Simon Horman 2018-05-20 8:50 ` Laurent Pinchart 2018-05-20 8:50 ` Laurent Pinchart 2018-05-22 12:00 ` Geert Uytterhoeven 2018-05-22 12:00 ` Geert Uytterhoeven 2018-08-01 10:35 ` jacopo mondi 2018-08-01 10:35 ` jacopo mondi 2018-08-01 11:59 ` Ulrich Hecht 2018-08-01 11:59 ` Ulrich Hecht 2018-05-15 12:20 ` [PATCH 4/5] arm64: dts: renesas: r8a77995-draak: add HDMI output Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:35 ` Simon Horman 2018-05-16 8:35 ` Simon Horman 2018-05-20 8:52 ` Laurent Pinchart 2018-05-20 8:52 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 5/5] arm64: dts: renesas: r8a77995-draak: add X12 input dot clock Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:38 ` Simon Horman 2018-05-16 8:38 ` Simon Horman 2018-05-20 8:58 ` Laurent Pinchart 2018-05-20 8:58 ` Laurent Pinchart 2018-05-22 8:58 ` Simon Horman 2018-05-22 8:58 ` Simon Horman 2018-05-20 8:27 ` [PATCH 0/5] R-Car D3 LVDS/HDMI support Laurent Pinchart 2018-05-20 8:27 ` Laurent Pinchart 2018-05-22 16:50 ` Laurent Pinchart 2018-05-22 16:50 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1526386840-15368-1-git-send-email-ulrich.hecht+renesas@gmail.com \ --to=ulrich.hecht+renesas@gmail.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-renesas-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.