From: Simon Horman <horms@verge.net.au> To: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, dri-devel@lists.freedesktop.org, Koji Matsuoka <koji.matsuoka.xm@renesas.com> Subject: Re: [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Date: Wed, 16 May 2018 10:03:42 +0200 [thread overview] Message-ID: <20180516080342.ltanqhcj5bhljp5t@verge.net.au> (raw) In-Reply-To: <1526386840-15368-2-git-send-email-ulrich.hecht+renesas@gmail.com> On Tue, May 15, 2018 at 02:20:36PM +0200, Ulrich Hecht wrote: > From: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > > Add support for the R-Car D3 (R8A77995) SoC to the R-Car DU driver. > > Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > index 05745e8..ba82842 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > @@ -266,6 +266,31 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = { > .num_lvds = 1, > }; > > +static const struct rcar_du_device_info rcar_du_r8a77995_info = { > + .gen = 3, > + .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK > + | RCAR_DU_FEATURE_EXT_CTRL_REGS > + | RCAR_DU_FEATURE_VSP1_SOURCE, > + .num_crtcs = 2, > + .routes = { > + /* R8A77995 has two LVDS output and one RGB output. > + */ > + [RCAR_DU_OUTPUT_DPAD0] = { > + .possible_crtcs = BIT(0) | BIT(1), > + .port = 0, > + }, > + [RCAR_DU_OUTPUT_LVDS0] = { > + .possible_crtcs = BIT(0), > + .port = 1, > + }, > + [RCAR_DU_OUTPUT_LVDS1] = { > + .possible_crtcs = BIT(1), > + .port = 2, > + }, > + }, > + .num_lvds = 2, > +}; > + > static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, > { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, > @@ -278,6 +303,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info }, > { .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info }, > { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info }, > + { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a77995_info }, > { } > }; > > -- > 2.7.4 >
WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <horms@verge.net.au> To: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, Koji Matsuoka <koji.matsuoka.xm@renesas.com>, dri-devel@lists.freedesktop.org Subject: Re: [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Date: Wed, 16 May 2018 10:03:42 +0200 [thread overview] Message-ID: <20180516080342.ltanqhcj5bhljp5t@verge.net.au> (raw) In-Reply-To: <1526386840-15368-2-git-send-email-ulrich.hecht+renesas@gmail.com> On Tue, May 15, 2018 at 02:20:36PM +0200, Ulrich Hecht wrote: > From: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > > Add support for the R-Car D3 (R8A77995) SoC to the R-Car DU driver. > > Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > index 05745e8..ba82842 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > @@ -266,6 +266,31 @@ static const struct rcar_du_device_info rcar_du_r8a77970_info = { > .num_lvds = 1, > }; > > +static const struct rcar_du_device_info rcar_du_r8a77995_info = { > + .gen = 3, > + .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK > + | RCAR_DU_FEATURE_EXT_CTRL_REGS > + | RCAR_DU_FEATURE_VSP1_SOURCE, > + .num_crtcs = 2, > + .routes = { > + /* R8A77995 has two LVDS output and one RGB output. > + */ > + [RCAR_DU_OUTPUT_DPAD0] = { > + .possible_crtcs = BIT(0) | BIT(1), > + .port = 0, > + }, > + [RCAR_DU_OUTPUT_LVDS0] = { > + .possible_crtcs = BIT(0), > + .port = 1, > + }, > + [RCAR_DU_OUTPUT_LVDS1] = { > + .possible_crtcs = BIT(1), > + .port = 2, > + }, > + }, > + .num_lvds = 2, > +}; > + > static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, > { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, > @@ -278,6 +303,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info }, > { .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info }, > { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info }, > + { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a77995_info }, > { } > }; > > -- > 2.7.4 > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-05-16 8:03 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-15 12:20 [PATCH 0/5] R-Car D3 LVDS/HDMI support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-15 12:20 ` [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:03 ` Simon Horman [this message] 2018-05-16 8:03 ` Simon Horman 2018-05-20 8:22 ` Laurent Pinchart 2018-05-20 8:22 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 7:54 ` Simon Horman 2018-05-16 7:54 ` Simon Horman 2018-05-16 8:59 ` Sergei Shtylyov 2018-05-16 8:59 ` Sergei Shtylyov 2018-05-16 13:06 ` Ulrich Hecht 2018-05-16 13:06 ` Ulrich Hecht 2018-05-16 17:07 ` Sergei Shtylyov 2018-05-16 17:07 ` Sergei Shtylyov 2018-05-17 8:59 ` Simon Horman 2018-05-17 8:59 ` Simon Horman 2018-05-20 8:45 ` Laurent Pinchart 2018-05-20 8:45 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:16 ` Simon Horman 2018-05-16 8:16 ` Simon Horman 2018-05-20 8:50 ` Laurent Pinchart 2018-05-20 8:50 ` Laurent Pinchart 2018-05-22 12:00 ` Geert Uytterhoeven 2018-05-22 12:00 ` Geert Uytterhoeven 2018-08-01 10:35 ` jacopo mondi 2018-08-01 10:35 ` jacopo mondi 2018-08-01 11:59 ` Ulrich Hecht 2018-08-01 11:59 ` Ulrich Hecht 2018-05-15 12:20 ` [PATCH 4/5] arm64: dts: renesas: r8a77995-draak: add HDMI output Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:35 ` Simon Horman 2018-05-16 8:35 ` Simon Horman 2018-05-20 8:52 ` Laurent Pinchart 2018-05-20 8:52 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 5/5] arm64: dts: renesas: r8a77995-draak: add X12 input dot clock Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:38 ` Simon Horman 2018-05-16 8:38 ` Simon Horman 2018-05-20 8:58 ` Laurent Pinchart 2018-05-20 8:58 ` Laurent Pinchart 2018-05-22 8:58 ` Simon Horman 2018-05-22 8:58 ` Simon Horman 2018-05-20 8:27 ` [PATCH 0/5] R-Car D3 LVDS/HDMI support Laurent Pinchart 2018-05-20 8:27 ` Laurent Pinchart 2018-05-22 16:50 ` Laurent Pinchart 2018-05-22 16:50 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180516080342.ltanqhcj5bhljp5t@verge.net.au \ --to=horms@verge.net.au \ --cc=dri-devel@lists.freedesktop.org \ --cc=koji.matsuoka.xm@renesas.com \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=ulrich.hecht+renesas@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.