From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> To: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, dri-devel@lists.freedesktop.org, Koji Matsuoka <koji.matsuoka.xm@renesas.com> Subject: Re: [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Date: Sun, 20 May 2018 11:22:21 +0300 [thread overview] Message-ID: <3388861.61vxE1Ocq2@avalon> (raw) In-Reply-To: <1526386840-15368-2-git-send-email-ulrich.hecht+renesas@gmail.com> Hi Ulrich, Thank you for the patch. On Tuesday, 15 May 2018 15:20:36 EEST Ulrich Hecht wrote: > From: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > > Add support for the R-Car D3 (R8A77995) SoC to the R-Car DU driver. > > Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> > --- > drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 05745e8..ba82842 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > @@ -266,6 +266,31 @@ static const struct rcar_du_device_info > rcar_du_r8a77970_info = { .num_lvds = 1, > }; > > +static const struct rcar_du_device_info rcar_du_r8a77995_info = { > + .gen = 3, > + .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK > + | RCAR_DU_FEATURE_EXT_CTRL_REGS > + | RCAR_DU_FEATURE_VSP1_SOURCE, > + .num_crtcs = 2, > + .routes = { > + /* R8A77995 has two LVDS output and one RGB output. > + */ This comment holds on a single line. Apart from that the patch looks good to me, but it conflicts with commit 5361cc7f8e9146f393cfcb76890d8c80a4e73086 Author: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Date: Fri Apr 27 23:21:52 2018 +0100 drm: rcar-du: Split CRTC handling to support hardware indexing that has been queued in Dave's DRM tree for v4.18. The num_crtcs field has been replaced with a channels_mask field. I can fix when applying but I can't test the result as I don't have a D3 board, so I'd prefer if you could submit a v2 rebased on top of Dave's drm-next branch. I'm also wondering whether we also need commit 6f3850955384cff722f02530f570806897b02a87 Author: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Date: Wed Dec 6 20:30:24 2017 +0900 drm: rcar-du: Fix digital RGB routing for R8A77995 from the BSP. What's your opinion ? > + [RCAR_DU_OUTPUT_DPAD0] = { > + .possible_crtcs = BIT(0) | BIT(1), > + .port = 0, > + }, > + [RCAR_DU_OUTPUT_LVDS0] = { > + .possible_crtcs = BIT(0), > + .port = 1, > + }, > + [RCAR_DU_OUTPUT_LVDS1] = { > + .possible_crtcs = BIT(1), > + .port = 2, > + }, > + }, > + .num_lvds = 2, > +}; > + > static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, > { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, > @@ -278,6 +303,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info }, > { .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info }, > { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info }, > + { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a77995_info }, > { } > }; -- Regards, Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> To: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, Koji Matsuoka <koji.matsuoka.xm@renesas.com>, dri-devel@lists.freedesktop.org Subject: Re: [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Date: Sun, 20 May 2018 11:22:21 +0300 [thread overview] Message-ID: <3388861.61vxE1Ocq2@avalon> (raw) In-Reply-To: <1526386840-15368-2-git-send-email-ulrich.hecht+renesas@gmail.com> Hi Ulrich, Thank you for the patch. On Tuesday, 15 May 2018 15:20:36 EEST Ulrich Hecht wrote: > From: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > > Add support for the R-Car D3 (R8A77995) SoC to the R-Car DU driver. > > Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> > --- > drivers/gpu/drm/rcar-du/rcar_du_drv.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 05745e8..ba82842 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c > @@ -266,6 +266,31 @@ static const struct rcar_du_device_info > rcar_du_r8a77970_info = { .num_lvds = 1, > }; > > +static const struct rcar_du_device_info rcar_du_r8a77995_info = { > + .gen = 3, > + .features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK > + | RCAR_DU_FEATURE_EXT_CTRL_REGS > + | RCAR_DU_FEATURE_VSP1_SOURCE, > + .num_crtcs = 2, > + .routes = { > + /* R8A77995 has two LVDS output and one RGB output. > + */ This comment holds on a single line. Apart from that the patch looks good to me, but it conflicts with commit 5361cc7f8e9146f393cfcb76890d8c80a4e73086 Author: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Date: Fri Apr 27 23:21:52 2018 +0100 drm: rcar-du: Split CRTC handling to support hardware indexing that has been queued in Dave's DRM tree for v4.18. The num_crtcs field has been replaced with a channels_mask field. I can fix when applying but I can't test the result as I don't have a D3 board, so I'd prefer if you could submit a v2 rebased on top of Dave's drm-next branch. I'm also wondering whether we also need commit 6f3850955384cff722f02530f570806897b02a87 Author: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Date: Wed Dec 6 20:30:24 2017 +0900 drm: rcar-du: Fix digital RGB routing for R8A77995 from the BSP. What's your opinion ? > + [RCAR_DU_OUTPUT_DPAD0] = { > + .possible_crtcs = BIT(0) | BIT(1), > + .port = 0, > + }, > + [RCAR_DU_OUTPUT_LVDS0] = { > + .possible_crtcs = BIT(0), > + .port = 1, > + }, > + [RCAR_DU_OUTPUT_LVDS1] = { > + .possible_crtcs = BIT(1), > + .port = 2, > + }, > + }, > + .num_lvds = 2, > +}; > + > static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, > { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info }, > @@ -278,6 +303,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7795", .data = &rcar_du_r8a7795_info }, > { .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info }, > { .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info }, > + { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a77995_info }, > { } > }; -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-05-20 8:21 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-15 12:20 [PATCH 0/5] R-Car D3 LVDS/HDMI support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-15 12:20 ` [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:03 ` Simon Horman 2018-05-16 8:03 ` Simon Horman 2018-05-20 8:22 ` Laurent Pinchart [this message] 2018-05-20 8:22 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 7:54 ` Simon Horman 2018-05-16 7:54 ` Simon Horman 2018-05-16 8:59 ` Sergei Shtylyov 2018-05-16 8:59 ` Sergei Shtylyov 2018-05-16 13:06 ` Ulrich Hecht 2018-05-16 13:06 ` Ulrich Hecht 2018-05-16 17:07 ` Sergei Shtylyov 2018-05-16 17:07 ` Sergei Shtylyov 2018-05-17 8:59 ` Simon Horman 2018-05-17 8:59 ` Simon Horman 2018-05-20 8:45 ` Laurent Pinchart 2018-05-20 8:45 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:16 ` Simon Horman 2018-05-16 8:16 ` Simon Horman 2018-05-20 8:50 ` Laurent Pinchart 2018-05-20 8:50 ` Laurent Pinchart 2018-05-22 12:00 ` Geert Uytterhoeven 2018-05-22 12:00 ` Geert Uytterhoeven 2018-08-01 10:35 ` jacopo mondi 2018-08-01 10:35 ` jacopo mondi 2018-08-01 11:59 ` Ulrich Hecht 2018-08-01 11:59 ` Ulrich Hecht 2018-05-15 12:20 ` [PATCH 4/5] arm64: dts: renesas: r8a77995-draak: add HDMI output Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:35 ` Simon Horman 2018-05-16 8:35 ` Simon Horman 2018-05-20 8:52 ` Laurent Pinchart 2018-05-20 8:52 ` Laurent Pinchart 2018-05-15 12:20 ` [PATCH 5/5] arm64: dts: renesas: r8a77995-draak: add X12 input dot clock Ulrich Hecht 2018-05-15 12:20 ` Ulrich Hecht 2018-05-16 8:38 ` Simon Horman 2018-05-16 8:38 ` Simon Horman 2018-05-20 8:58 ` Laurent Pinchart 2018-05-20 8:58 ` Laurent Pinchart 2018-05-22 8:58 ` Simon Horman 2018-05-22 8:58 ` Simon Horman 2018-05-20 8:27 ` [PATCH 0/5] R-Car D3 LVDS/HDMI support Laurent Pinchart 2018-05-20 8:27 ` Laurent Pinchart 2018-05-22 16:50 ` Laurent Pinchart 2018-05-22 16:50 ` Laurent Pinchart
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=3388861.61vxE1Ocq2@avalon \ --to=laurent.pinchart@ideasonboard.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=koji.matsuoka.xm@renesas.com \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=ulrich.hecht+renesas@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.