From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> To: johannes@sipsolutions.net, ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Subject: [PATCH 0/3] Add support for ftm responder configuration Date: Tue, 14 Aug 2018 17:30:15 -0700 [thread overview] Message-ID: <1534293018-4930-1-git-send-email-pradeepc@codeaurora.org> (raw) Currently ftm_responder parameter in hostapd.conf is only used for fine timing measurement (FTM) capability advertisement and actual control of the functionality is with low-level device/driver. This leads to confusion to the user when the capability advertisement is different from actual FTM responder functionality. For example, FTM responder capability advertisement is set to 'disabled', which would imply that AP must not respond to FTM requests, but user sees AP still responding to FTM requests, as the functionality is enabled in the driver. The patch set allows userspace to configure FTM responder functionality with the addition of new Netlink attribute NL80211_ATTR_FTM_RESPONDER and also adds extended feature flag for the drivers to advertise the support. Sending '0' to disable FTM responder would imply AP does not respond to FTM requests and sending '1' to enable FTM responder would imply that AP responds to all FTM requests. Pradeep Kumar Chitrapu (3): nl80211: add support to configure FTM responder functionality mac80211: Add support to notify ftm responder configuration to the driver ath10k: Add support to configure ftm responder role drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/mac.c | 29 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++ drivers/net/wireless/ath/ath10k/wmi.h | 10 ++++++++++ include/net/cfg80211.h | 2 ++ include/net/mac80211.h | 4 ++++ include/uapi/linux/nl80211.h | 20 ++++++++++++++++++++ net/mac80211/cfg.c | 4 ++++ net/mac80211/util.c | 3 +++ net/wireless/nl80211.c | 19 +++++++++++++++++++ 10 files changed, 96 insertions(+) -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> To: johannes@sipsolutions.net, ath10k@lists.infradead.org Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>, linux-wireless@vger.kernel.org Subject: [PATCH 0/3] Add support for ftm responder configuration Date: Tue, 14 Aug 2018 17:30:15 -0700 [thread overview] Message-ID: <1534293018-4930-1-git-send-email-pradeepc@codeaurora.org> (raw) Currently ftm_responder parameter in hostapd.conf is only used for fine timing measurement (FTM) capability advertisement and actual control of the functionality is with low-level device/driver. This leads to confusion to the user when the capability advertisement is different from actual FTM responder functionality. For example, FTM responder capability advertisement is set to 'disabled', which would imply that AP must not respond to FTM requests, but user sees AP still responding to FTM requests, as the functionality is enabled in the driver. The patch set allows userspace to configure FTM responder functionality with the addition of new Netlink attribute NL80211_ATTR_FTM_RESPONDER and also adds extended feature flag for the drivers to advertise the support. Sending '0' to disable FTM responder would imply AP does not respond to FTM requests and sending '1' to enable FTM responder would imply that AP responds to all FTM requests. Pradeep Kumar Chitrapu (3): nl80211: add support to configure FTM responder functionality mac80211: Add support to notify ftm responder configuration to the driver ath10k: Add support to configure ftm responder role drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/mac.c | 29 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 4 ++++ drivers/net/wireless/ath/ath10k/wmi.h | 10 ++++++++++ include/net/cfg80211.h | 2 ++ include/net/mac80211.h | 4 ++++ include/uapi/linux/nl80211.h | 20 ++++++++++++++++++++ net/mac80211/cfg.c | 4 ++++ net/mac80211/util.c | 3 +++ net/wireless/nl80211.c | 19 +++++++++++++++++++ 10 files changed, 96 insertions(+) -- 1.9.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2018-08-15 3:26 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-15 0:30 Pradeep Kumar Chitrapu [this message] 2018-08-15 0:30 ` [PATCH 0/3] Add support for ftm responder configuration Pradeep Kumar Chitrapu 2018-08-15 0:30 ` [PATCH 1/3] nl80211: add support to configure FTM responder functionality Pradeep Kumar Chitrapu 2018-08-15 0:30 ` Pradeep Kumar Chitrapu 2018-08-15 12:09 ` Johannes Berg 2018-08-15 12:09 ` Johannes Berg 2018-08-16 1:48 ` pradeepc 2018-08-16 1:48 ` pradeepc 2018-08-16 8:09 ` Johannes Berg 2018-08-16 8:09 ` Johannes Berg 2018-08-31 1:10 ` [PATCH 1/3] cfg80211: support FTM responder configuration/statistics Pradeep Kumar Chitrapu 2018-08-31 1:10 ` Pradeep Kumar Chitrapu 2018-08-15 0:30 ` [PATCH 2/3] mac80211: Add support to notify ftm responder configuration to the driver Pradeep Kumar Chitrapu 2018-08-15 0:30 ` Pradeep Kumar Chitrapu 2018-08-15 12:09 ` Johannes Berg 2018-08-15 12:09 ` Johannes Berg 2018-08-31 1:11 ` [PATCH 2/3] mac80211: support FTM responder configuration/statistics Pradeep Kumar Chitrapu 2018-08-31 1:11 ` Pradeep Kumar Chitrapu 2018-08-15 0:30 ` [PATCH 3/3] ath10k: Add support to configure ftm responder role Pradeep Kumar Chitrapu 2018-08-15 0:30 ` Pradeep Kumar Chitrapu 2018-08-15 10:03 ` Sebastian Gottschall 2018-08-15 10:03 ` Sebastian Gottschall 2018-08-15 10:16 ` Sebastian Gottschall 2018-08-15 10:16 ` Sebastian Gottschall 2018-10-01 13:32 ` Kalle Valo 2018-10-01 13:32 ` Kalle Valo 2018-11-16 12:17 ` Kalle Valo 2018-11-16 12:17 ` Kalle Valo 2018-08-31 1:11 ` Pradeep Kumar Chitrapu 2018-08-31 1:11 ` Pradeep Kumar Chitrapu 2018-08-15 9:04 ` [PATCH 0/3] Add support for ftm responder configuration Johannes Berg 2018-08-15 9:04 ` Johannes Berg 2018-08-16 1:50 ` pradeepc 2018-08-16 1:50 ` pradeepc 2018-08-16 8:12 ` Johannes Berg 2018-08-16 8:12 ` Johannes Berg 2018-08-18 7:50 ` Pradeep Kumar Chitrapu 2018-08-18 7:50 ` Pradeep Kumar Chitrapu 2018-08-20 9:33 ` Johannes Berg 2018-08-20 9:33 ` Johannes Berg 2018-08-21 18:32 ` Pradeep Kumar Chitrapu 2018-08-21 18:32 ` Pradeep Kumar Chitrapu 2018-08-21 19:24 ` Johannes Berg 2018-08-21 19:24 ` Johannes Berg 2018-08-16 9:21 ` Kalle Valo 2018-08-16 9:21 ` Kalle Valo 2018-08-31 1:10 ` [PATCH 0/3] support ftm responder configuration/statistics Pradeep Kumar Chitrapu 2018-08-31 1:10 ` Pradeep Kumar Chitrapu 2018-08-21 22:08 [PATCH 0/3] Add support for ftm responder configuration Pradeep Kumar Chitrapu 2018-08-21 22:08 ` Pradeep Kumar Chitrapu 2018-08-22 7:27 ` Johannes Berg 2018-08-22 7:27 ` Johannes Berg 2018-08-22 18:22 ` Pradeep Kumar Chitrapu 2018-08-22 18:22 ` Pradeep Kumar Chitrapu 2018-08-28 8:43 ` Johannes Berg 2018-08-28 8:43 ` Johannes Berg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1534293018-4930-1-git-send-email-pradeepc@codeaurora.org \ --to=pradeepc@codeaurora.org \ --cc=ath10k@lists.infradead.org \ --cc=johannes@sipsolutions.net \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.