Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver

From: Lee Jones <lee.jones@linaro.org>
To: Michael Walle <michael@walle.cc>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Wim Van Sebroeck" <wim@linux-watchdog.org>,
	"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Marc Zyngier" <maz@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
Subject: Re: [PATCH v5 02/13] mfd: add simple regmap based I2C driver
Date: Fri, 17 Jul 2020 10:04:44 +0100	[thread overview]
Message-ID: <20200717090444.GE3165313@dell> (raw)
In-Reply-To: <20200706175353.16404-3-michael@walle.cc>

On Mon, 06 Jul 2020, Michael Walle wrote:

> There are I2C devices which contain several different functions but
> doesn't require any special access functions. For these kind of drivers
> an I2C regmap should be enough.
> 
> Create an I2C driver which creates an I2C regmap and enumerates its
> children. If a device wants to use this as its MFD core driver, it has
> to add an individual compatible string. It may provide its own regmap
> configuration.
> 
> Subdevices can use dev_get_regmap() on the parent to get their regmap
> instance.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> Changes since v4:
>  - new patch. Lee, please bear with me. I didn't want to delay the
>    new version (where a lot of remarks on the other patches were
>    addressed) even more, just because we haven't figured out how
>    to deal with the MFD part. So for now, I've included this one.
> 
>  drivers/mfd/Kconfig          |  9 +++++++
>  drivers/mfd/Makefile         |  1 +
>  drivers/mfd/simple-mfd-i2c.c | 50 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 60 insertions(+)
>  create mode 100644 drivers/mfd/simple-mfd-i2c.c
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 33df0837ab41..f1536a710aca 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1162,6 +1162,15 @@ config MFD_SI476X_CORE
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called si476x-core.
>  
> +config MFD_SIMPLE_MFD_I2C
> +	tristate "Simple regmap based I2C devices"
> +	depends on I2C
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	help
> +	  This is a consolidated driver for all MFD devices which are
> +	  basically just a regmap bus driver.
> +
>  config MFD_SM501
>  	tristate "Silicon Motion SM501"
>  	depends on HAS_DMA
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index a60e5f835283..78d24a3e7c9e 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -264,3 +264,4 @@ obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
>  obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
>  
>  obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
> +obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
> diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
> new file mode 100644
> index 000000000000..1fdca89964b1
> --- /dev/null
> +++ b/drivers/mfd/simple-mfd-i2c.c
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>

I'm pretty sure you do not require all of these headers.

> +struct simple_mfd_i2c_config {
> +	const struct regmap_config *regmap_config;
> +};

No need for this yet I feel.

Let's keep it as simple as possible.

> +static const struct regmap_config simple_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int simple_mfd_i2c_probe(struct i2c_client *i2c)
> +{
> +	const struct regmap_config *regmap_config = &simple_regmap_config;
> +	const struct simple_mfd_i2c_config *config;
> +	struct regmap *regmap;
> +
> +	config = device_get_match_data(&i2c->dev);

Have this return regmap_config.

> +	if (config && config->regmap_config)
> +		regmap_config = config->regmap_config;
> +
> +	regmap = devm_regmap_init_i2c(i2c, regmap_config);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	return devm_of_platform_populate(&i2c->dev);
> +}
> +
> +static const struct of_device_id simple_mfd_i2c_of_match[] = {
> +	{}
> +};
> +
> +static struct i2c_driver simple_mfd_i2c_driver = {
> +	.probe_new = simple_mfd_i2c_probe,
> +	.driver = {
> +		.name = "simple-mfd-i2c",
> +		.of_match_table = simple_mfd_i2c_of_match,
> +	},
> +};
> +builtin_i2c_driver(simple_mfd_i2c_driver);

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog