From: Jesse Taube <mr.bossman075@gmail.com> To: linux-imx@nxp.com Cc: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, Mr.Bossman075@gmail.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org, Jesse Taube <mr.bossman075@gmail.com> Subject: [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock Date: Thu, 25 Nov 2021 16:14:36 -0500 [thread overview] Message-ID: <20211125211443.1150135-7-Mr.Bossman075@gmail.com> (raw) In-Reply-To: <20211125211443.1150135-1-Mr.Bossman075@gmail.com> From: Jesse Taube <mr.bossman075@gmail.com> Add DT binding documentation for i.MXRT clock driver. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1->V2: * Replace macros with values V2->V3: * Remove anatop * Use lpuart not gpt * include imxrt1050-clock.h * 2 space tabs to 4 * Remove oneOf enum * Change maxItems to 2 --- .../bindings/clock/imxrt-clock.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imxrt-clock.yaml diff --git a/Documentation/devicetree/bindings/clock/imxrt-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt-clock.yaml new file mode 100644 index 000000000000..8af48c59ff99 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imxrt-clock.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imxrt-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MXRT + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h + for the full list of i.MXRT clock IDs. + +properties: + compatible: + const: fsl,imxrt1050-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + clocks: + minItems: 1 + + clock-names: + minItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imxrt1050-clock.h> + + ccm@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; + + + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + }; -- 2.34.0
WARNING: multiple messages have this Message-ID (diff)
From: Jesse Taube <mr.bossman075@gmail.com> To: linux-imx@nxp.com Cc: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, Mr.Bossman075@gmail.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org, Jesse Taube <mr.bossman075@gmail.com> Subject: [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock Date: Thu, 25 Nov 2021 16:14:36 -0500 [thread overview] Message-ID: <20211125211443.1150135-7-Mr.Bossman075@gmail.com> (raw) In-Reply-To: <20211125211443.1150135-1-Mr.Bossman075@gmail.com> From: Jesse Taube <mr.bossman075@gmail.com> Add DT binding documentation for i.MXRT clock driver. Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1->V2: * Replace macros with values V2->V3: * Remove anatop * Use lpuart not gpt * include imxrt1050-clock.h * 2 space tabs to 4 * Remove oneOf enum * Change maxItems to 2 --- .../bindings/clock/imxrt-clock.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imxrt-clock.yaml diff --git a/Documentation/devicetree/bindings/clock/imxrt-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt-clock.yaml new file mode 100644 index 000000000000..8af48c59ff99 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imxrt-clock.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/imxrt-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for Freescale i.MXRT + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + - Jesse Taube <Mr.Bossman075@gmail.com> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h + for the full list of i.MXRT clock IDs. + +properties: + compatible: + const: fsl,imxrt1050-ccm + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + clocks: + minItems: 1 + + clock-names: + minItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imxrt1050-clock.h> + + ccm@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; + + + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + }; -- 2.34.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-25 21:17 UTC|newest] Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-25 21:14 [PATCH v3 00/13] add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:14 ` [PATCH v3 01/13] ARM: imx: add initial support for i.MXRT10xx family Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:14 ` [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-29 1:04 ` Rob Herring 2021-11-29 1:04 ` Rob Herring 2021-12-02 1:28 ` Linus Walleij 2021-12-02 1:28 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-29 1:06 ` Rob Herring 2021-11-29 1:06 ` Rob Herring 2021-12-02 1:31 ` Linus Walleij 2021-12-02 1:31 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-27 1:43 ` Linus Walleij 2021-11-27 1:43 ` Linus Walleij 2021-11-27 2:24 ` Giulio Benetti 2021-11-27 12:48 ` Fabio Estevam 2021-11-27 12:48 ` Fabio Estevam 2021-12-02 1:31 ` Linus Walleij 2021-12-02 1:31 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050 Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:28 ` Rob Herring 2021-11-28 16:28 ` Rob Herring 2021-11-25 21:14 ` Jesse Taube [this message] 2021-11-25 21:14 ` [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock Jesse Taube 2021-11-28 16:32 ` Rob Herring 2021-11-28 16:32 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:50 ` Fabio Estevam 2021-11-28 20:50 ` Fabio Estevam 2021-11-28 20:52 ` Jesse Taube 2021-11-28 20:52 ` Jesse Taube 2021-11-28 20:54 ` Fabio Estevam 2021-11-28 20:54 ` Fabio Estevam 2021-11-28 20:59 ` Jesse Taube 2021-11-28 20:59 ` Jesse Taube 2021-11-28 21:01 ` Fabio Estevam 2021-11-28 21:01 ` Fabio Estevam 2021-11-28 22:17 ` Giulio Benetti 2021-11-28 22:17 ` Giulio Benetti 2021-11-25 21:14 ` [PATCH v3 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:31 ` Rob Herring 2021-11-28 16:31 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 09/13] tty: serial: fsl_lpuart: add i.MXRT support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:47 ` Fabio Estevam 2021-11-28 20:47 ` Fabio Estevam 2021-11-25 21:14 ` [PATCH v3 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:32 ` Rob Herring 2021-11-28 16:32 ` Rob Herring 2021-11-30 15:41 ` Ulf Hansson 2021-11-30 15:41 ` Ulf Hansson 2021-11-25 21:14 ` [PATCH v3 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:51 ` Fabio Estevam 2021-11-28 20:51 ` Fabio Estevam 2021-11-30 15:41 ` Ulf Hansson 2021-11-30 15:41 ` Ulf Hansson 2021-11-25 21:14 ` [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:43 ` Rob Herring 2021-11-28 16:43 ` Rob Herring 2021-11-28 17:00 ` Jesse Taube 2021-11-28 17:00 ` Jesse Taube 2021-12-03 0:20 ` Giulio Benetti 2021-12-03 0:20 ` Giulio Benetti 2021-12-03 1:04 ` Giulio Benetti 2021-11-25 21:14 ` [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:42 ` Arnd Bergmann 2021-11-25 21:42 ` Arnd Bergmann 2021-11-25 22:19 ` Jesse Taube 2021-11-25 22:19 ` Jesse Taube 2021-11-29 1:21 ` Giulio Benetti 2021-11-29 1:21 ` Giulio Benetti 2021-11-29 1:54 ` Jesse Taube 2021-11-29 1:54 ` Jesse Taube
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211125211443.1150135-7-Mr.Bossman075@gmail.com \ --to=mr.bossman075@gmail.com \ --cc=abel.vesa@nxp.com \ --cc=adrian.hunter@intel.com \ --cc=aisheng.dong@nxp.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=giulio.benetti@benettiengineering.com \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=kernel@pengutronix.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mturquette@baylibre.com \ --cc=nobuhiro1.iwamatsu@toshiba.co.jp \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ --cc=stefan@agner.ch \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.