From: Rob Herring <robh@kernel.org> To: Jesse Taube <mr.bossman075@gmail.com> Cc: linux-imx@nxp.com, mturquette@baylibre.com, sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org Subject: Re: [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050 Date: Sun, 28 Nov 2021 10:28:04 -0600 [thread overview] Message-ID: <YaOuFGhNzGVxdF03@robh.at.kernel.org> (raw) In-Reply-To: <20211125211443.1150135-6-Mr.Bossman075@gmail.com> On Thu, Nov 25, 2021 at 04:14:35PM -0500, Jesse Taube wrote: > From: Giulio Benetti <giulio.benetti@benettiengineering.com> > > Add the clock binding doc for i.MXRT1050. > > Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > [Giulio: added all clocks up to IMXRT1050_CLK_USBOH3] > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> > [Jesse: added clocks from IMXRT1050_CLK_IPG_PDOF to > IMXRT1050_CLK_DMA_MUX and moved IMXRT1050_CLK_END on] > --- > V1->V2: > * Nothing done > V2->V3: > * Added GPT binding > --- > include/dt-bindings/clock/imxrt1050-clock.h | 73 +++++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 include/dt-bindings/clock/imxrt1050-clock.h > > diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h > new file mode 100644 > index 000000000000..9811676d100b > --- /dev/null > +++ b/include/dt-bindings/clock/imxrt1050-clock.h > @@ -0,0 +1,73 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ Dual license matching the rest of i.MX. > +/* > + * Copyright(C) 2019 > + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_IMXRT1050_H > +#define __DT_BINDINGS_CLOCK_IMXRT1050_H > + > +#define IMXRT1050_CLK_DUMMY 0 > +#define IMXRT1050_CLK_CKIL 1 > +#define IMXRT1050_CLK_CKIH 2 > +#define IMXRT1050_CLK_OSC 3 > +#define IMXRT1050_CLK_PLL2_PFD0_352M 4 > +#define IMXRT1050_CLK_PLL2_PFD1_594M 5 > +#define IMXRT1050_CLK_PLL2_PFD2_396M 6 > +#define IMXRT1050_CLK_PLL3_PFD0_720M 7 > +#define IMXRT1050_CLK_PLL3_PFD1_664_62M 8 > +#define IMXRT1050_CLK_PLL3_PFD2_508_24M 9 > +#define IMXRT1050_CLK_PLL3_PFD3_454_74M 10 > +#define IMXRT1050_CLK_PLL2_198M 11 > +#define IMXRT1050_CLK_PLL3_120M 12 > +#define IMXRT1050_CLK_PLL3_80M 13 > +#define IMXRT1050_CLK_PLL3_60M 14 > +#define IMXRT1050_CLK_PLL1_BYPASS 15 > +#define IMXRT1050_CLK_PLL2_BYPASS 16 > +#define IMXRT1050_CLK_PLL3_BYPASS 17 > +#define IMXRT1050_CLK_PLL5_BYPASS 19 > +#define IMXRT1050_CLK_PLL1_REF_SEL 20 > +#define IMXRT1050_CLK_PLL2_REF_SEL 21 > +#define IMXRT1050_CLK_PLL3_REF_SEL 22 > +#define IMXRT1050_CLK_PLL5_REF_SEL 23 > +#define IMXRT1050_CLK_PRE_PERIPH_SEL 24 > +#define IMXRT1050_CLK_PERIPH_SEL 25 > +#define IMXRT1050_CLK_SEMC_ALT_SEL 26 > +#define IMXRT1050_CLK_SEMC_SEL 27 > +#define IMXRT1050_CLK_USDHC1_SEL 28 > +#define IMXRT1050_CLK_USDHC2_SEL 29 > +#define IMXRT1050_CLK_LPUART_SEL 30 > +#define IMXRT1050_CLK_LCDIF_SEL 31 > +#define IMXRT1050_CLK_VIDEO_POST_DIV_SEL 32 > +#define IMXRT1050_CLK_VIDEO_DIV 33 > +#define IMXRT1050_CLK_ARM_PODF 34 > +#define IMXRT1050_CLK_LPUART_PODF 35 > +#define IMXRT1050_CLK_USDHC1_PODF 36 > +#define IMXRT1050_CLK_USDHC2_PODF 37 > +#define IMXRT1050_CLK_SEMC_PODF 38 > +#define IMXRT1050_CLK_AHB_PODF 39 > +#define IMXRT1050_CLK_LCDIF_PRED 40 > +#define IMXRT1050_CLK_LCDIF_PODF 41 > +#define IMXRT1050_CLK_USDHC1 42 > +#define IMXRT1050_CLK_USDHC2 43 > +#define IMXRT1050_CLK_LPUART1 44 > +#define IMXRT1050_CLK_SEMC 45 > +#define IMXRT1050_CLK_LCDIF_APB 46 > +#define IMXRT1050_CLK_PLL1_ARM 47 > +#define IMXRT1050_CLK_PLL2_SYS 48 > +#define IMXRT1050_CLK_PLL3_USB_OTG 49 > +#define IMXRT1050_CLK_PLL4_AUDIO 50 > +#define IMXRT1050_CLK_PLL5_VIDEO 51 > +#define IMXRT1050_CLK_PLL6_ENET 52 > +#define IMXRT1050_CLK_PLL7_USB_HOST 53 > +#define IMXRT1050_CLK_LCDIF_PIX 54 > +#define IMXRT1050_CLK_USBOH3 55 > +#define IMXRT1050_CLK_IPG_PDOF 56 > +#define IMXRT1050_CLK_PER_CLK_SEL 57 > +#define IMXRT1050_CLK_PER_PDOF 58 > +#define IMXRT1050_CLK_DMA 59 > +#define IMXRT1050_CLK_DMA_MUX 60 > +#define IMXRT1050_CLK_GPT 70 > +#define IMXRT1050_CLK_END 71 > + > +#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */ > -- > 2.34.0 > >
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: Jesse Taube <mr.bossman075@gmail.com> Cc: linux-imx@nxp.com, mturquette@baylibre.com, sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, aisheng.dong@nxp.com, stefan@agner.ch, linus.walleij@linaro.org, gregkh@linuxfoundation.org, arnd@arndb.de, olof@lixom.net, soc@kernel.org, linux@armlinux.org.uk, abel.vesa@nxp.com, adrian.hunter@intel.com, jirislaby@kernel.org, giulio.benetti@benettiengineering.com, nobuhiro1.iwamatsu@toshiba.co.jp, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org Subject: Re: [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050 Date: Sun, 28 Nov 2021 10:28:04 -0600 [thread overview] Message-ID: <YaOuFGhNzGVxdF03@robh.at.kernel.org> (raw) In-Reply-To: <20211125211443.1150135-6-Mr.Bossman075@gmail.com> On Thu, Nov 25, 2021 at 04:14:35PM -0500, Jesse Taube wrote: > From: Giulio Benetti <giulio.benetti@benettiengineering.com> > > Add the clock binding doc for i.MXRT1050. > > Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > [Giulio: added all clocks up to IMXRT1050_CLK_USBOH3] > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> > [Jesse: added clocks from IMXRT1050_CLK_IPG_PDOF to > IMXRT1050_CLK_DMA_MUX and moved IMXRT1050_CLK_END on] > --- > V1->V2: > * Nothing done > V2->V3: > * Added GPT binding > --- > include/dt-bindings/clock/imxrt1050-clock.h | 73 +++++++++++++++++++++ > 1 file changed, 73 insertions(+) > create mode 100644 include/dt-bindings/clock/imxrt1050-clock.h > > diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h > new file mode 100644 > index 000000000000..9811676d100b > --- /dev/null > +++ b/include/dt-bindings/clock/imxrt1050-clock.h > @@ -0,0 +1,73 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ Dual license matching the rest of i.MX. > +/* > + * Copyright(C) 2019 > + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> > + */ > + > +#ifndef __DT_BINDINGS_CLOCK_IMXRT1050_H > +#define __DT_BINDINGS_CLOCK_IMXRT1050_H > + > +#define IMXRT1050_CLK_DUMMY 0 > +#define IMXRT1050_CLK_CKIL 1 > +#define IMXRT1050_CLK_CKIH 2 > +#define IMXRT1050_CLK_OSC 3 > +#define IMXRT1050_CLK_PLL2_PFD0_352M 4 > +#define IMXRT1050_CLK_PLL2_PFD1_594M 5 > +#define IMXRT1050_CLK_PLL2_PFD2_396M 6 > +#define IMXRT1050_CLK_PLL3_PFD0_720M 7 > +#define IMXRT1050_CLK_PLL3_PFD1_664_62M 8 > +#define IMXRT1050_CLK_PLL3_PFD2_508_24M 9 > +#define IMXRT1050_CLK_PLL3_PFD3_454_74M 10 > +#define IMXRT1050_CLK_PLL2_198M 11 > +#define IMXRT1050_CLK_PLL3_120M 12 > +#define IMXRT1050_CLK_PLL3_80M 13 > +#define IMXRT1050_CLK_PLL3_60M 14 > +#define IMXRT1050_CLK_PLL1_BYPASS 15 > +#define IMXRT1050_CLK_PLL2_BYPASS 16 > +#define IMXRT1050_CLK_PLL3_BYPASS 17 > +#define IMXRT1050_CLK_PLL5_BYPASS 19 > +#define IMXRT1050_CLK_PLL1_REF_SEL 20 > +#define IMXRT1050_CLK_PLL2_REF_SEL 21 > +#define IMXRT1050_CLK_PLL3_REF_SEL 22 > +#define IMXRT1050_CLK_PLL5_REF_SEL 23 > +#define IMXRT1050_CLK_PRE_PERIPH_SEL 24 > +#define IMXRT1050_CLK_PERIPH_SEL 25 > +#define IMXRT1050_CLK_SEMC_ALT_SEL 26 > +#define IMXRT1050_CLK_SEMC_SEL 27 > +#define IMXRT1050_CLK_USDHC1_SEL 28 > +#define IMXRT1050_CLK_USDHC2_SEL 29 > +#define IMXRT1050_CLK_LPUART_SEL 30 > +#define IMXRT1050_CLK_LCDIF_SEL 31 > +#define IMXRT1050_CLK_VIDEO_POST_DIV_SEL 32 > +#define IMXRT1050_CLK_VIDEO_DIV 33 > +#define IMXRT1050_CLK_ARM_PODF 34 > +#define IMXRT1050_CLK_LPUART_PODF 35 > +#define IMXRT1050_CLK_USDHC1_PODF 36 > +#define IMXRT1050_CLK_USDHC2_PODF 37 > +#define IMXRT1050_CLK_SEMC_PODF 38 > +#define IMXRT1050_CLK_AHB_PODF 39 > +#define IMXRT1050_CLK_LCDIF_PRED 40 > +#define IMXRT1050_CLK_LCDIF_PODF 41 > +#define IMXRT1050_CLK_USDHC1 42 > +#define IMXRT1050_CLK_USDHC2 43 > +#define IMXRT1050_CLK_LPUART1 44 > +#define IMXRT1050_CLK_SEMC 45 > +#define IMXRT1050_CLK_LCDIF_APB 46 > +#define IMXRT1050_CLK_PLL1_ARM 47 > +#define IMXRT1050_CLK_PLL2_SYS 48 > +#define IMXRT1050_CLK_PLL3_USB_OTG 49 > +#define IMXRT1050_CLK_PLL4_AUDIO 50 > +#define IMXRT1050_CLK_PLL5_VIDEO 51 > +#define IMXRT1050_CLK_PLL6_ENET 52 > +#define IMXRT1050_CLK_PLL7_USB_HOST 53 > +#define IMXRT1050_CLK_LCDIF_PIX 54 > +#define IMXRT1050_CLK_USBOH3 55 > +#define IMXRT1050_CLK_IPG_PDOF 56 > +#define IMXRT1050_CLK_PER_CLK_SEL 57 > +#define IMXRT1050_CLK_PER_PDOF 58 > +#define IMXRT1050_CLK_DMA 59 > +#define IMXRT1050_CLK_DMA_MUX 60 > +#define IMXRT1050_CLK_GPT 70 > +#define IMXRT1050_CLK_END 71 > + > +#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */ > -- > 2.34.0 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-28 16:30 UTC|newest] Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-25 21:14 [PATCH v3 00/13] add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:14 ` [PATCH v3 01/13] ARM: imx: add initial support for i.MXRT10xx family Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:14 ` [PATCH v3 02/13] dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-29 1:04 ` Rob Herring 2021-11-29 1:04 ` Rob Herring 2021-12-02 1:28 ` Linus Walleij 2021-12-02 1:28 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 03/13] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-29 1:06 ` Rob Herring 2021-11-29 1:06 ` Rob Herring 2021-12-02 1:31 ` Linus Walleij 2021-12-02 1:31 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 04/13] pinctrl: freescale: Add i.MXRT1050 pinctrl driver support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-27 1:43 ` Linus Walleij 2021-11-27 1:43 ` Linus Walleij 2021-11-27 2:24 ` Giulio Benetti 2021-11-27 12:48 ` Fabio Estevam 2021-11-27 12:48 ` Fabio Estevam 2021-12-02 1:31 ` Linus Walleij 2021-12-02 1:31 ` Linus Walleij 2021-11-25 21:14 ` [PATCH v3 05/13] dt-bindings: imx: Add clock binding for i.MXRT1050 Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:28 ` Rob Herring [this message] 2021-11-28 16:28 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 06/13] dt-bindings: clock: imx: Add documentation for i.MXRT clock Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:32 ` Rob Herring 2021-11-28 16:32 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 07/13] clk: imx: Add initial support for i.MXRT clock driver Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:50 ` Fabio Estevam 2021-11-28 20:50 ` Fabio Estevam 2021-11-28 20:52 ` Jesse Taube 2021-11-28 20:52 ` Jesse Taube 2021-11-28 20:54 ` Fabio Estevam 2021-11-28 20:54 ` Fabio Estevam 2021-11-28 20:59 ` Jesse Taube 2021-11-28 20:59 ` Jesse Taube 2021-11-28 21:01 ` Fabio Estevam 2021-11-28 21:01 ` Fabio Estevam 2021-11-28 22:17 ` Giulio Benetti 2021-11-28 22:17 ` Giulio Benetti 2021-11-25 21:14 ` [PATCH v3 08/13] dt-bindings: serial: fsl-lpuart: add i.MXRT compatible Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:31 ` Rob Herring 2021-11-28 16:31 ` Rob Herring 2021-11-25 21:14 ` [PATCH v3 09/13] tty: serial: fsl_lpuart: add i.MXRT support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:47 ` Fabio Estevam 2021-11-28 20:47 ` Fabio Estevam 2021-11-25 21:14 ` [PATCH v3 10/13] dt-bindings: mmc: fsl-imx-esdhc: add i.MXRT compatible string Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:32 ` Rob Herring 2021-11-28 16:32 ` Rob Herring 2021-11-30 15:41 ` Ulf Hansson 2021-11-30 15:41 ` Ulf Hansson 2021-11-25 21:14 ` [PATCH v3 11/13] mmc: sdhci-esdhc-imx: Add sdhc support for i.MXRT series Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 20:51 ` Fabio Estevam 2021-11-28 20:51 ` Fabio Estevam 2021-11-30 15:41 ` Ulf Hansson 2021-11-30 15:41 ` Ulf Hansson 2021-11-25 21:14 ` [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-28 16:43 ` Rob Herring 2021-11-28 16:43 ` Rob Herring 2021-11-28 17:00 ` Jesse Taube 2021-11-28 17:00 ` Jesse Taube 2021-12-03 0:20 ` Giulio Benetti 2021-12-03 0:20 ` Giulio Benetti 2021-12-03 1:04 ` Giulio Benetti 2021-11-25 21:14 ` [PATCH v3 13/13] ARM: imxrt_defconfig: add i.MXRT family defconfig Jesse Taube 2021-11-25 21:14 ` Jesse Taube 2021-11-25 21:42 ` Arnd Bergmann 2021-11-25 21:42 ` Arnd Bergmann 2021-11-25 22:19 ` Jesse Taube 2021-11-25 22:19 ` Jesse Taube 2021-11-29 1:21 ` Giulio Benetti 2021-11-29 1:21 ` Giulio Benetti 2021-11-29 1:54 ` Jesse Taube 2021-11-29 1:54 ` Jesse Taube
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=YaOuFGhNzGVxdF03@robh.at.kernel.org \ --to=robh@kernel.org \ --cc=abel.vesa@nxp.com \ --cc=adrian.hunter@intel.com \ --cc=aisheng.dong@nxp.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=giulio.benetti@benettiengineering.com \ --cc=gregkh@linuxfoundation.org \ --cc=jirislaby@kernel.org \ --cc=kernel@pengutronix.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mr.bossman075@gmail.com \ --cc=mturquette@baylibre.com \ --cc=nobuhiro1.iwamatsu@toshiba.co.jp \ --cc=olof@lixom.net \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ --cc=stefan@agner.ch \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.