From: Rob Herring <robh@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
Date: Wed, 25 Jan 2023 13:19:51 -0600 [thread overview]
Message-ID: <20230125191951.GA2709957-robh@kernel.org> (raw)
In-Reply-To: <440a7cad-d48f-8975-4dfd-265b235bf629@gmail.com>
On Mon, Jan 23, 2023 at 10:28:49PM +0100, Heiner Kallweit wrote:
> Add Amlogic Meson vrtc controller binding.
You are not adding, you are converting.
> Tested with make targets dt_binding_check and dtbs_check.
That's assumed...
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++
> .../bindings/rtc/rtc-meson-vrtc.txt | 22 --------
> 2 files changed, 50 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> new file mode 100644
> index 000000000..26a70b3ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Virtual RTC (VRTC)
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description: |
> + This is a Linux interface to an RTC managed by firmware, hence it's
> + virtual from a Linux perspective. The interface is 1 register where
> + an alarm time (in seconds) is to be written.
> + The alarm register is a simple scratch register shared between the
> + application processors (AP) and the secure co-processor (SCP.) When
> + the AP suspends, the SCP will use the value of this register to
> + program an always-on timer before going sleep. When the timer expires,
> + the SCP will wake up and will then wake the AP.
> +
> +allOf:
> + - $ref: rtc.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-vrtc
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + bus@ff800000 {
> + reg = <0x0 0xff800000 0x0 0x100000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rtc@a8 {
> + compatible = "amlogic,meson-vrtc";
> + reg = <0x0 0x000a8 0x0 0x4>;
Just use 1 address/size cell here and then you don't need the bus node
(which has an error in it (no ranges)).
Rob
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
Date: Wed, 25 Jan 2023 13:19:51 -0600 [thread overview]
Message-ID: <20230125191951.GA2709957-robh@kernel.org> (raw)
In-Reply-To: <440a7cad-d48f-8975-4dfd-265b235bf629@gmail.com>
On Mon, Jan 23, 2023 at 10:28:49PM +0100, Heiner Kallweit wrote:
> Add Amlogic Meson vrtc controller binding.
You are not adding, you are converting.
> Tested with make targets dt_binding_check and dtbs_check.
That's assumed...
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++
> .../bindings/rtc/rtc-meson-vrtc.txt | 22 --------
> 2 files changed, 50 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> new file mode 100644
> index 000000000..26a70b3ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Virtual RTC (VRTC)
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description: |
> + This is a Linux interface to an RTC managed by firmware, hence it's
> + virtual from a Linux perspective. The interface is 1 register where
> + an alarm time (in seconds) is to be written.
> + The alarm register is a simple scratch register shared between the
> + application processors (AP) and the secure co-processor (SCP.) When
> + the AP suspends, the SCP will use the value of this register to
> + program an always-on timer before going sleep. When the timer expires,
> + the SCP will wake up and will then wake the AP.
> +
> +allOf:
> + - $ref: rtc.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-vrtc
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + bus@ff800000 {
> + reg = <0x0 0xff800000 0x0 0x100000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rtc@a8 {
> + compatible = "amlogic,meson-vrtc";
> + reg = <0x0 0x000a8 0x0 0x4>;
Just use 1 address/size cell here and then you don't need the bus node
(which has an error in it (no ranges)).
Rob
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding
Date: Wed, 25 Jan 2023 13:19:51 -0600 [thread overview]
Message-ID: <20230125191951.GA2709957-robh@kernel.org> (raw)
In-Reply-To: <440a7cad-d48f-8975-4dfd-265b235bf629@gmail.com>
On Mon, Jan 23, 2023 at 10:28:49PM +0100, Heiner Kallweit wrote:
> Add Amlogic Meson vrtc controller binding.
You are not adding, you are converting.
> Tested with make targets dt_binding_check and dtbs_check.
That's assumed...
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> .../bindings/rtc/amlogic,meson-vrtc.yaml | 50 +++++++++++++++++++
> .../bindings/rtc/rtc-meson-vrtc.txt | 22 --------
> 2 files changed, 50 insertions(+), 22 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> new file mode 100644
> index 000000000..26a70b3ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Virtual RTC (VRTC)
> +
> +maintainers:
> + - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description: |
> + This is a Linux interface to an RTC managed by firmware, hence it's
> + virtual from a Linux perspective. The interface is 1 register where
> + an alarm time (in seconds) is to be written.
> + The alarm register is a simple scratch register shared between the
> + application processors (AP) and the secure co-processor (SCP.) When
> + the AP suspends, the SCP will use the value of this register to
> + program an always-on timer before going sleep. When the timer expires,
> + the SCP will wake up and will then wake the AP.
> +
> +allOf:
> + - $ref: rtc.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - amlogic,meson-vrtc
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + bus@ff800000 {
> + reg = <0x0 0xff800000 0x0 0x100000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rtc@a8 {
> + compatible = "amlogic,meson-vrtc";
> + reg = <0x0 0x000a8 0x0 0x4>;
Just use 1 address/size cell here and then you don't need the bus node
(which has an error in it (no ranges)).
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-25 19:19 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:22 ` Heiner Kallweit
2023-01-23 21:22 ` Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
2023-01-23 21:24 ` Heiner Kallweit
2023-01-23 21:24 ` Heiner Kallweit
2023-01-24 7:17 ` Neil Armstrong
2023-01-24 7:17 ` Neil Armstrong
2023-01-24 7:17 ` Neil Armstrong
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-23 21:28 ` Heiner Kallweit
2023-01-23 21:28 ` Heiner Kallweit
2023-01-25 19:19 ` Rob Herring [this message]
2023-01-25 19:19 ` Rob Herring
2023-01-25 19:19 ` Rob Herring
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
2023-01-23 21:29 ` Heiner Kallweit
2023-01-23 21:29 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:03 ` Heiner Kallweit
2023-01-24 7:03 ` Heiner Kallweit
2023-01-24 7:03 ` Heiner Kallweit
2023-01-25 16:46 ` Rob Herring
2023-01-25 16:46 ` Rob Herring
2023-01-25 16:46 ` Rob Herring
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-01-24 7:16 ` Neil Armstrong
2023-01-24 7:16 ` Neil Armstrong
2023-01-24 9:20 ` Heiner Kallweit
2023-01-24 9:20 ` Heiner Kallweit
2023-01-24 9:20 ` Heiner Kallweit
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-24 8:22 ` (subset) " Neil Armstrong
2023-01-24 8:22 ` Neil Armstrong
2023-01-24 8:22 ` Neil Armstrong
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-25 22:24 ` Heiner Kallweit
2023-01-25 22:24 ` Heiner Kallweit
2023-01-30 17:09 ` Rob Herring
2023-01-30 17:09 ` Rob Herring
2023-01-30 17:09 ` Rob Herring
2023-02-09 22:16 ` (subset) " Alexandre Belloni
2023-02-09 22:16 ` Alexandre Belloni
2023-02-09 22:16 ` Alexandre Belloni
2023-01-25 22:28 ` [PATCH v2] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-25 22:28 ` Heiner Kallweit
2023-01-25 22:28 ` Heiner Kallweit
2023-01-30 17:16 ` Rob Herring
2023-01-30 17:16 ` Rob Herring
2023-01-30 17:16 ` Rob Herring
2023-01-27 21:14 ` [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-27 21:14 ` Heiner Kallweit
2023-01-27 21:14 ` Heiner Kallweit
2023-01-27 21:16 ` [PATCH v2] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-27 21:16 ` Heiner Kallweit
2023-01-27 21:16 ` Heiner Kallweit
2023-01-30 20:34 ` [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-30 20:34 ` Heiner Kallweit
2023-01-30 20:34 ` Heiner Kallweit
2023-01-30 21:21 ` Rob Herring
2023-01-30 21:21 ` Rob Herring
2023-01-30 21:21 ` Rob Herring
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-01-30 20:53 ` [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-30 20:53 ` Heiner Kallweit
2023-01-30 20:53 ` Heiner Kallweit
2023-02-01 2:03 ` Rob Herring
2023-02-01 2:03 ` Rob Herring
2023-02-01 2:03 ` Rob Herring
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 10:21 ` Neil Armstrong
2023-02-01 10:21 ` Neil Armstrong
2023-02-01 10:21 ` Neil Armstrong
2023-01-30 21:00 ` [PATCH v3] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-30 21:00 ` Heiner Kallweit
2023-01-30 21:00 ` Heiner Kallweit
2023-02-01 2:06 ` Rob Herring
2023-02-01 2:06 ` Rob Herring
2023-02-01 2:06 ` Rob Herring
2023-02-01 22:13 ` Heiner Kallweit
2023-02-01 22:13 ` Heiner Kallweit
2023-02-01 22:13 ` Heiner Kallweit
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 16:54 ` Heiner Kallweit
2023-02-05 16:54 ` Heiner Kallweit
2023-02-05 16:54 ` Heiner Kallweit
2023-02-06 9:30 ` Neil Armstrong
2023-02-06 9:30 ` Neil Armstrong
2023-02-06 9:30 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-06-22 7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230125191951.GA2709957-robh@kernel.org \
--to=robh@kernel.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=hkallweit1@gmail.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=maz@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.