From: Heiner Kallweit <hkallweit1@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: "Thierry Reding" <thierry.reding@gmail.com>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
linux-pwm@vger.kernel.org,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-rtc@vger.kernel.org,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Subject: Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
Date: Tue, 24 Jan 2023 08:03:17 +0100 [thread overview]
Message-ID: <d8f0a5a9-5a16-1f63-8444-86434ff52e34@gmail.com> (raw)
In-Reply-To: <167452325371.3118653.16373677195744392136.robh@kernel.org>
On 24.01.2023 02:22, Rob Herring wrote:
>
> On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson GPIO interrupt controller binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> .../amlogic,meson-gpio-intc.txt | 38 ----------
>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
>> 2 files changed, 72 insertions(+), 38 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
Patch 4 of the series fixes these warnings.
Did you apply the full series?
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/06289641-18b1-320d-6162-7ae176452f31@gmail.com
>
>
> interrupt-controller@4080: compatible: ['amlogic,meson-s4-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb
>
> interrupt-controller@9880: compatible:0: 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,meson-sc2-gpio-intc']
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson8-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson8b-gpio-intc'] is too long
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxbb-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxl-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-axg-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-g12a-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-u200.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-sm1-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb
>
WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: "Thierry Reding" <thierry.reding@gmail.com>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
linux-pwm@vger.kernel.org,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-rtc@vger.kernel.org,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Subject: Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
Date: Tue, 24 Jan 2023 08:03:17 +0100 [thread overview]
Message-ID: <d8f0a5a9-5a16-1f63-8444-86434ff52e34@gmail.com> (raw)
In-Reply-To: <167452325371.3118653.16373677195744392136.robh@kernel.org>
On 24.01.2023 02:22, Rob Herring wrote:
>
> On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson GPIO interrupt controller binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> .../amlogic,meson-gpio-intc.txt | 38 ----------
>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
>> 2 files changed, 72 insertions(+), 38 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
Patch 4 of the series fixes these warnings.
Did you apply the full series?
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/06289641-18b1-320d-6162-7ae176452f31@gmail.com
>
>
> interrupt-controller@4080: compatible: ['amlogic,meson-s4-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb
>
> interrupt-controller@9880: compatible:0: 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,meson-sc2-gpio-intc']
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson8-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson8b-gpio-intc'] is too long
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxbb-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxl-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-axg-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-g12a-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-u200.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-sm1-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb
>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: "Thierry Reding" <thierry.reding@gmail.com>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
linux-pwm@vger.kernel.org,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-rtc@vger.kernel.org,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>
Subject: Re: [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding
Date: Tue, 24 Jan 2023 08:03:17 +0100 [thread overview]
Message-ID: <d8f0a5a9-5a16-1f63-8444-86434ff52e34@gmail.com> (raw)
In-Reply-To: <167452325371.3118653.16373677195744392136.robh@kernel.org>
On 24.01.2023 02:22, Rob Herring wrote:
>
> On Mon, 23 Jan 2023 22:30:08 +0100, Heiner Kallweit wrote:
>> Add Amlogic Meson GPIO interrupt controller binding.
>> Tested with make targets dt_binding_check and dtbs_check.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> .../amlogic,meson-gpio-intc.txt | 38 ----------
>> .../amlogic,meson-gpio-intc.yaml | 72 +++++++++++++++++++
>> 2 files changed, 72 insertions(+), 38 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
>>
>
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
>
Patch 4 of the series fixes these warnings.
Did you apply the full series?
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
>
> Full log is available here: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/06289641-18b1-320d-6162-7ae176452f31@gmail.com
>
>
> interrupt-controller@4080: compatible: ['amlogic,meson-s4-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb
>
> interrupt-controller@9880: compatible:0: 'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,meson-sc2-gpio-intc']
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson8-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm/boot/dts/meson8m2-mxiii-plus.dtb
> arch/arm/boot/dts/meson8-minix-neo-x8.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson8b-gpio-intc'] is too long
> arch/arm/boot/dts/meson8b-ec100.dtb
> arch/arm/boot/dts/meson8b-mxq.dtb
> arch/arm/boot/dts/meson8b-odroidc1.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxbb-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dtb
> arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dtb
>
> interrupt-controller@9880: compatible: ['amlogic,meson-gpio-intc', 'amlogic,meson-gxl-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dtb
> arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-q201.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dtb
> arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-axg-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dtb
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-g12a-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-u200.dtb
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dtb
> arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dtb
>
> interrupt-controller@f080: compatible: ['amlogic,meson-sm1-gpio-intc', 'amlogic,meson-gpio-intc'] is too long
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dtb
> arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dtb
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-24 7:04 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:22 ` Heiner Kallweit
2023-01-23 21:22 ` Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
2023-01-23 21:24 ` Heiner Kallweit
2023-01-23 21:24 ` Heiner Kallweit
2023-01-24 7:17 ` Neil Armstrong
2023-01-24 7:17 ` Neil Armstrong
2023-01-24 7:17 ` Neil Armstrong
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-23 21:28 ` Heiner Kallweit
2023-01-23 21:28 ` Heiner Kallweit
2023-01-25 19:19 ` Rob Herring
2023-01-25 19:19 ` Rob Herring
2023-01-25 19:19 ` Rob Herring
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
2023-01-23 21:29 ` Heiner Kallweit
2023-01-23 21:29 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:03 ` Heiner Kallweit [this message]
2023-01-24 7:03 ` Heiner Kallweit
2023-01-24 7:03 ` Heiner Kallweit
2023-01-25 16:46 ` Rob Herring
2023-01-25 16:46 ` Rob Herring
2023-01-25 16:46 ` Rob Herring
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-01-24 7:16 ` Neil Armstrong
2023-01-24 7:16 ` Neil Armstrong
2023-01-24 9:20 ` Heiner Kallweit
2023-01-24 9:20 ` Heiner Kallweit
2023-01-24 9:20 ` Heiner Kallweit
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-24 8:22 ` (subset) " Neil Armstrong
2023-01-24 8:22 ` Neil Armstrong
2023-01-24 8:22 ` Neil Armstrong
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-25 22:24 ` Heiner Kallweit
2023-01-25 22:24 ` Heiner Kallweit
2023-01-30 17:09 ` Rob Herring
2023-01-30 17:09 ` Rob Herring
2023-01-30 17:09 ` Rob Herring
2023-02-09 22:16 ` (subset) " Alexandre Belloni
2023-02-09 22:16 ` Alexandre Belloni
2023-02-09 22:16 ` Alexandre Belloni
2023-01-25 22:28 ` [PATCH v2] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-25 22:28 ` Heiner Kallweit
2023-01-25 22:28 ` Heiner Kallweit
2023-01-30 17:16 ` Rob Herring
2023-01-30 17:16 ` Rob Herring
2023-01-30 17:16 ` Rob Herring
2023-01-27 21:14 ` [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-27 21:14 ` Heiner Kallweit
2023-01-27 21:14 ` Heiner Kallweit
2023-01-27 21:16 ` [PATCH v2] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-27 21:16 ` Heiner Kallweit
2023-01-27 21:16 ` Heiner Kallweit
2023-01-30 20:34 ` [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-30 20:34 ` Heiner Kallweit
2023-01-30 20:34 ` Heiner Kallweit
2023-01-30 21:21 ` Rob Herring
2023-01-30 21:21 ` Rob Herring
2023-01-30 21:21 ` Rob Herring
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-01-30 20:53 ` [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-30 20:53 ` Heiner Kallweit
2023-01-30 20:53 ` Heiner Kallweit
2023-02-01 2:03 ` Rob Herring
2023-02-01 2:03 ` Rob Herring
2023-02-01 2:03 ` Rob Herring
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 10:21 ` Neil Armstrong
2023-02-01 10:21 ` Neil Armstrong
2023-02-01 10:21 ` Neil Armstrong
2023-01-30 21:00 ` [PATCH v3] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-30 21:00 ` Heiner Kallweit
2023-01-30 21:00 ` Heiner Kallweit
2023-02-01 2:06 ` Rob Herring
2023-02-01 2:06 ` Rob Herring
2023-02-01 2:06 ` Rob Herring
2023-02-01 22:13 ` Heiner Kallweit
2023-02-01 22:13 ` Heiner Kallweit
2023-02-01 22:13 ` Heiner Kallweit
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 16:54 ` Heiner Kallweit
2023-02-05 16:54 ` Heiner Kallweit
2023-02-05 16:54 ` Heiner Kallweit
2023-02-06 9:30 ` Neil Armstrong
2023-02-06 9:30 ` Neil Armstrong
2023-02-06 9:30 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-06-22 7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d8f0a5a9-5a16-1f63-8444-86434ff52e34@gmail.com \
--to=hkallweit1@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=maz@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.