From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
Date: Mon, 23 Jan 2023 22:24:40 +0100 [thread overview]
Message-ID: <55c53e8d-6b30-51bf-edf6-b5b67887bd0a@gmail.com> (raw)
In-Reply-To: <cb62dfc0-cb3d-beba-6d0b-8db18583dda0@gmail.com>
mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
In preparation of adding schema-based validation fix the node name
in two affected files.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1648e67af..ed895fb32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- sd_emmc_b: sd@5000 {
+ sd_emmc_b: mmc@5000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..80d82f739 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
@@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
--
2.39.1
WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
Date: Mon, 23 Jan 2023 22:24:40 +0100 [thread overview]
Message-ID: <55c53e8d-6b30-51bf-edf6-b5b67887bd0a@gmail.com> (raw)
In-Reply-To: <cb62dfc0-cb3d-beba-6d0b-8db18583dda0@gmail.com>
mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
In preparation of adding schema-based validation fix the node name
in two affected files.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1648e67af..ed895fb32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- sd_emmc_b: sd@5000 {
+ sd_emmc_b: mmc@5000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..80d82f739 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
@@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
--
2.39.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Alessandro Zummo" <a.zummo@towertech.it>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Marc Zyngier" <maz@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
linux-pwm@vger.kernel.org, linux-rtc@vger.kernel.org,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Subject: [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names
Date: Mon, 23 Jan 2023 22:24:40 +0100 [thread overview]
Message-ID: <55c53e8d-6b30-51bf-edf6-b5b67887bd0a@gmail.com> (raw)
In-Reply-To: <cb62dfc0-cb3d-beba-6d0b-8db18583dda0@gmail.com>
mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
In preparation of adding schema-based validation fix the node name
in two affected files.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1648e67af..ed895fb32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- sd_emmc_b: sd@5000 {
+ sd_emmc_b: mmc@5000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..80d82f739 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
@@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
--
2.39.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-23 21:31 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-23 21:22 [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Heiner Kallweit
2023-01-23 21:22 ` Heiner Kallweit
2023-01-23 21:22 ` Heiner Kallweit
2023-01-23 21:23 ` [PATCH 1/8] arm64: dts: meson-gx: Remove invalid pwm compatible Heiner Kallweit
2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:23 ` Heiner Kallweit
2023-01-23 21:24 ` Heiner Kallweit [this message]
2023-01-23 21:24 ` [PATCH 2/8] arm64: dts: amlogic: Fix non-compliant SD/SDIO node names Heiner Kallweit
2023-01-23 21:24 ` Heiner Kallweit
2023-01-24 7:17 ` Neil Armstrong
2023-01-24 7:17 ` Neil Armstrong
2023-01-24 7:17 ` Neil Armstrong
2023-01-23 21:25 ` [PATCH 3/8] arm64: dts: meson-gx: Set only one compatible string for mmc Heiner Kallweit
2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:25 ` Heiner Kallweit
2023-01-23 21:27 ` [PATCH 4/8] arm64: dts: amlogic: Remove invalid compatible string amlogic,meson-gpio-intc Heiner Kallweit
2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:27 ` Heiner Kallweit
2023-01-23 21:28 ` [PATCH 5/8] dt-bindings: rtc: Add Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-23 21:28 ` Heiner Kallweit
2023-01-23 21:28 ` Heiner Kallweit
2023-01-25 19:19 ` Rob Herring
2023-01-25 19:19 ` Rob Herring
2023-01-25 19:19 ` Rob Herring
2023-01-23 21:29 ` [PATCH 6/8] dt-bindings: pwm: Add Amlogic Meson PWM binding Heiner Kallweit
2023-01-23 21:29 ` Heiner Kallweit
2023-01-23 21:29 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-25 19:22 ` Rob Herring
2023-01-23 21:30 ` [PATCH 7/8] dt-bindings: interrupt-controller: Add Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:03 ` Heiner Kallweit
2023-01-24 7:03 ` Heiner Kallweit
2023-01-24 7:03 ` Heiner Kallweit
2023-01-25 16:46 ` Rob Herring
2023-01-25 16:46 ` Rob Herring
2023-01-25 16:46 ` Rob Herring
2023-01-23 21:30 ` [PATCH 8/8] dt-bindings: pinctrl: Add Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-23 21:30 ` Heiner Kallweit
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 1:22 ` Rob Herring
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:14 ` Heiner Kallweit
2023-01-24 7:16 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-01-24 7:16 ` Neil Armstrong
2023-01-24 7:16 ` Neil Armstrong
2023-01-24 9:20 ` Heiner Kallweit
2023-01-24 9:20 ` Heiner Kallweit
2023-01-24 9:20 ` Heiner Kallweit
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-26 7:40 ` Uwe Kleine-König
2023-01-24 8:22 ` (subset) " Neil Armstrong
2023-01-24 8:22 ` Neil Armstrong
2023-01-24 8:22 ` Neil Armstrong
2023-01-25 22:24 ` [PATCH v2] dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding Heiner Kallweit
2023-01-25 22:24 ` Heiner Kallweit
2023-01-25 22:24 ` Heiner Kallweit
2023-01-30 17:09 ` Rob Herring
2023-01-30 17:09 ` Rob Herring
2023-01-30 17:09 ` Rob Herring
2023-02-09 22:16 ` (subset) " Alexandre Belloni
2023-02-09 22:16 ` Alexandre Belloni
2023-02-09 22:16 ` Alexandre Belloni
2023-01-25 22:28 ` [PATCH v2] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-25 22:28 ` Heiner Kallweit
2023-01-25 22:28 ` Heiner Kallweit
2023-01-30 17:16 ` Rob Herring
2023-01-30 17:16 ` Rob Herring
2023-01-30 17:16 ` Rob Herring
2023-01-27 21:14 ` [PATCH v2] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-27 21:14 ` Heiner Kallweit
2023-01-27 21:14 ` Heiner Kallweit
2023-01-27 21:16 ` [PATCH v2] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-27 21:16 ` Heiner Kallweit
2023-01-27 21:16 ` Heiner Kallweit
2023-01-30 20:34 ` [PATCH v3] dt-bindings: pwm: Convert Amlogic Meson PWM binding Heiner Kallweit
2023-01-30 20:34 ` Heiner Kallweit
2023-01-30 20:34 ` Heiner Kallweit
2023-01-30 21:21 ` Rob Herring
2023-01-30 21:21 ` Rob Herring
2023-01-30 21:21 ` Rob Herring
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-02-01 7:35 ` Krzysztof Kozlowski
2023-01-30 20:53 ` [PATCH v3] dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding Heiner Kallweit
2023-01-30 20:53 ` Heiner Kallweit
2023-01-30 20:53 ` Heiner Kallweit
2023-02-01 2:03 ` Rob Herring
2023-02-01 2:03 ` Rob Herring
2023-02-01 2:03 ` Rob Herring
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 6:47 ` Heiner Kallweit
2023-02-01 10:21 ` Neil Armstrong
2023-02-01 10:21 ` Neil Armstrong
2023-02-01 10:21 ` Neil Armstrong
2023-01-30 21:00 ` [PATCH v3] dt-bindings: pinctrl: Convert Amlogic Meson pinctrl binding Heiner Kallweit
2023-01-30 21:00 ` Heiner Kallweit
2023-01-30 21:00 ` Heiner Kallweit
2023-02-01 2:06 ` Rob Herring
2023-02-01 2:06 ` Rob Herring
2023-02-01 2:06 ` Rob Herring
2023-02-01 22:13 ` Heiner Kallweit
2023-02-01 22:13 ` Heiner Kallweit
2023-02-01 22:13 ` Heiner Kallweit
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-04 22:56 ` Martin Blumenstingl
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 0:05 ` Heiner Kallweit
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 7:57 ` Neil Armstrong
2023-02-05 16:54 ` Heiner Kallweit
2023-02-05 16:54 ` Heiner Kallweit
2023-02-05 16:54 ` Heiner Kallweit
2023-02-06 9:30 ` Neil Armstrong
2023-02-06 9:30 ` Neil Armstrong
2023-02-06 9:30 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-02-01 10:56 ` Neil Armstrong
2023-06-22 7:57 ` [PATCH 0/8] soc: amlogic: switch bindings to yaml and adjust some dtbs's Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
2023-06-22 7:57 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55c53e8d-6b30-51bf-edf6-b5b67887bd0a@gmail.com \
--to=hkallweit1@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=maz@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.