From: Christian Lamparter <chunkeey@gmail.com>
To: mbizon@freebox.fr
Cc: akolli@codeaurora.org, akolli@qti.qualcomm.com,
ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
linux-wireless-owner@vger.kernel.org
Subject: Re: [PATCH 2/2] ath10k: add per peer tx stats support for 10.2.4
Date: Fri, 01 Dec 2017 16:53:10 +0100 [thread overview]
Message-ID: <6519868.NEUq8DTjxK@debian64> (raw)
In-Reply-To: <1512140710.38490.81.camel@sakura.staff.proxad.net>
On Friday, December 1, 2017 4:05:10 PM CET Maxime Bizon wrote:
>
> On Fri, 2017-12-01 at 19:18 +0530, akolli@codeaurora.org wrote:
>
> > Hope CONFIG_MAC80211_DEBUGFS is enabled in your build.
>
> it wasn't and IMHO it's confusing because tx rate is filled by the other
> drivers without it.
>
> I now have the following warning:
>
> [ 96.174967] ------------[ cut here ]------------
> [ 96.179640] WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220
> [ 96.189538] invalid rate bw=1, mcs=9, nss=2
> [ 96.219736] CPU: 0 PID: 609 Comm: hostapd Not tainted 4.14.3-00381-gec9756b0f64d #28
> [ 96.227910] Hardware name: Marvell Kirkwood (Flattened Device Tree)
> [ 96.235450] [<80010124>] (unwind_backtrace) from [<8000d9ec>] (show_stack+0x10/0x14)
> [ 96.247180] [<8000d9ec>] (show_stack) from [<8002016c>] (__warn+0xdc/0xf8)
> [ 96.254243] [<8002016c>] (__warn) from [<800201bc>] (warn_slowpath_fmt+0x34/0x44)
> [ 96.262016] [<800201bc>] (warn_slowpath_fmt) from [<8064dfdc>] (cfg80211_calculate_bitrate+0x174/0x220)
> [ 96.272652] [<8064dfdc>] (cfg80211_calculate_bitrate) from [<806692d4>] (nl80211_put_sta_rate+0x44/0x1dc)
> [ 96.282509] [<806692d4>] (nl80211_put_sta_rate) from [<8066001c>] (nl80211_send_station+0x388/0xaf0)
> [ 96.292261] [<8066001c>] (nl80211_send_station) from [<8066082c>] (nl80211_get_station+0xa8/0xec)
> [ 96.304166] [<8066082c>] (nl80211_get_station) from [<80509c20>] (genl_rcv_msg+0x2dc/0x34c)
> [ 96.313324] [<80509c20>] (genl_rcv_msg) from [<8050890c>] (netlink_rcv_skb+0x84/0xdc)
> [ 96.321880] [<8050890c>] (netlink_rcv_skb) from [<805093c0>] (genl_rcv+0x20/0x34)
> [ 96.329668] [<805093c0>] (genl_rcv) from [<80508188>] (netlink_unicast+0x12c/0x1e0)
> [ 96.338408] [<80508188>] (netlink_unicast) from [<805085d8>] (netlink_sendmsg+0x2e0/0x304)
> [ 96.350736] [<805085d8>] (netlink_sendmsg) from [<804b5f9c>] (sock_sendmsg+0x14/0x24)
> [ 96.358656] [<804b5f9c>] (sock_sendmsg) from [<804b66e8>] (___sys_sendmsg+0x1c8/0x20c)
> [ 96.367093] [<804b66e8>] (___sys_sendmsg) from [<804b739c>] (__sys_sendmsg+0x40/0x64)
> [ 96.375276] [<804b739c>] (__sys_sendmsg) from [<8000a3e0>] (ret_fast_syscall+0x0/0x44)
> [ 96.383455] ---[ end trace da8257d6a850e91a ]---
>
Look for:
"[PATCH] ath10k: fix recent bandwidth conversion bug"
WARNING: multiple messages have this Message-ID (diff)
From: Christian Lamparter <chunkeey@gmail.com>
To: mbizon@freebox.fr
Cc: linux-wireless-owner@vger.kernel.org, akolli@qti.qualcomm.com,
akolli@codeaurora.org, linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Subject: Re: [PATCH 2/2] ath10k: add per peer tx stats support for 10.2.4
Date: Fri, 01 Dec 2017 16:53:10 +0100 [thread overview]
Message-ID: <6519868.NEUq8DTjxK@debian64> (raw)
In-Reply-To: <1512140710.38490.81.camel@sakura.staff.proxad.net>
On Friday, December 1, 2017 4:05:10 PM CET Maxime Bizon wrote:
>
> On Fri, 2017-12-01 at 19:18 +0530, akolli@codeaurora.org wrote:
>
> > Hope CONFIG_MAC80211_DEBUGFS is enabled in your build.
>
> it wasn't and IMHO it's confusing because tx rate is filled by the other
> drivers without it.
>
> I now have the following warning:
>
> [ 96.174967] ------------[ cut here ]------------
> [ 96.179640] WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254 cfg80211_calculate_bitrate+0x174/0x220
> [ 96.189538] invalid rate bw=1, mcs=9, nss=2
> [ 96.219736] CPU: 0 PID: 609 Comm: hostapd Not tainted 4.14.3-00381-gec9756b0f64d #28
> [ 96.227910] Hardware name: Marvell Kirkwood (Flattened Device Tree)
> [ 96.235450] [<80010124>] (unwind_backtrace) from [<8000d9ec>] (show_stack+0x10/0x14)
> [ 96.247180] [<8000d9ec>] (show_stack) from [<8002016c>] (__warn+0xdc/0xf8)
> [ 96.254243] [<8002016c>] (__warn) from [<800201bc>] (warn_slowpath_fmt+0x34/0x44)
> [ 96.262016] [<800201bc>] (warn_slowpath_fmt) from [<8064dfdc>] (cfg80211_calculate_bitrate+0x174/0x220)
> [ 96.272652] [<8064dfdc>] (cfg80211_calculate_bitrate) from [<806692d4>] (nl80211_put_sta_rate+0x44/0x1dc)
> [ 96.282509] [<806692d4>] (nl80211_put_sta_rate) from [<8066001c>] (nl80211_send_station+0x388/0xaf0)
> [ 96.292261] [<8066001c>] (nl80211_send_station) from [<8066082c>] (nl80211_get_station+0xa8/0xec)
> [ 96.304166] [<8066082c>] (nl80211_get_station) from [<80509c20>] (genl_rcv_msg+0x2dc/0x34c)
> [ 96.313324] [<80509c20>] (genl_rcv_msg) from [<8050890c>] (netlink_rcv_skb+0x84/0xdc)
> [ 96.321880] [<8050890c>] (netlink_rcv_skb) from [<805093c0>] (genl_rcv+0x20/0x34)
> [ 96.329668] [<805093c0>] (genl_rcv) from [<80508188>] (netlink_unicast+0x12c/0x1e0)
> [ 96.338408] [<80508188>] (netlink_unicast) from [<805085d8>] (netlink_sendmsg+0x2e0/0x304)
> [ 96.350736] [<805085d8>] (netlink_sendmsg) from [<804b5f9c>] (sock_sendmsg+0x14/0x24)
> [ 96.358656] [<804b5f9c>] (sock_sendmsg) from [<804b66e8>] (___sys_sendmsg+0x1c8/0x20c)
> [ 96.367093] [<804b66e8>] (___sys_sendmsg) from [<804b739c>] (__sys_sendmsg+0x40/0x64)
> [ 96.375276] [<804b739c>] (__sys_sendmsg) from [<8000a3e0>] (ret_fast_syscall+0x0/0x44)
> [ 96.383455] ---[ end trace da8257d6a850e91a ]---
>
Look for:
"[PATCH] ath10k: fix recent bandwidth conversion bug"
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-12-01 15:53 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-30 12:58 [PATCH 0/2] ath10k: tx stats for 10.2.4 akolli
2017-11-30 12:58 ` akolli
2017-11-30 12:58 ` [PATCH 1/2] ath10k: move pktlog_filter out of ath10k_debug akolli
2017-11-30 12:58 ` akolli
2017-11-30 12:58 ` [PATCH 2/2] ath10k: add per peer tx stats support for 10.2.4 akolli
2017-11-30 12:58 ` akolli
2017-11-30 16:14 ` Kalle Valo
2017-11-30 16:14 ` Kalle Valo
2017-11-30 16:28 ` Toke Høiland-Jørgensen
2017-11-30 16:28 ` Toke Høiland-Jørgensen
2017-11-30 16:38 ` Kalle Valo
2017-11-30 16:38 ` Kalle Valo
2017-12-01 4:23 ` akolli
2017-12-01 4:23 ` akolli
2017-12-01 13:41 ` Toke Høiland-Jørgensen
2017-12-01 13:41 ` Toke Høiland-Jørgensen
2017-12-01 14:49 ` Kalle Valo
2017-12-01 14:49 ` Kalle Valo
2017-12-01 15:29 ` Toke Høiland-Jørgensen
2017-12-01 15:29 ` Toke Høiland-Jørgensen
2017-12-01 15:45 ` Johannes Berg
2017-12-01 15:45 ` Johannes Berg
2017-12-01 15:54 ` Toke Høiland-Jørgensen
2017-12-01 15:54 ` Toke Høiland-Jørgensen
2017-12-01 15:58 ` Johannes Berg
2017-12-01 15:58 ` Johannes Berg
2017-12-02 9:53 ` Toke Høiland-Jørgensen
2017-12-02 9:53 ` Toke Høiland-Jørgensen
2017-12-01 10:45 ` Maxime Bizon
2017-12-01 10:45 ` Maxime Bizon
2017-12-01 13:48 ` akolli
2017-12-01 13:48 ` akolli
2017-12-01 15:05 ` Maxime Bizon
2017-12-01 15:05 ` Maxime Bizon
2017-12-01 15:53 ` Christian Lamparter [this message]
2017-12-01 15:53 ` Christian Lamparter
2017-12-01 16:09 ` Maxime Bizon
2017-12-01 16:09 ` Maxime Bizon
2017-12-04 13:24 ` akolli
2017-12-04 13:24 ` akolli
2017-12-04 14:23 ` Maxime Bizon
2017-12-04 14:23 ` Maxime Bizon
2017-12-05 5:26 ` akolli
2017-12-05 5:26 ` akolli
2017-12-01 15:44 ` Kalle Valo
2017-12-01 15:44 ` Kalle Valo
2017-12-04 11:20 ` akolli
2017-12-04 11:20 ` akolli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6519868.NEUq8DTjxK@debian64 \
--to=chunkeey@gmail.com \
--cc=akolli@codeaurora.org \
--cc=akolli@qti.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless-owner@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mbizon@freebox.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.