* [U-Boot] [PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic
@ 2019-03-13 8:28 sbabic at denx.de
2019-03-25 16:07 ` [U-Boot] [REGRESSION: PATCH " Marcel Ziswiler
0 siblings, 1 reply; 9+ messages in thread
From: sbabic at denx.de @ 2019-03-13 8:28 UTC (permalink / raw)
To: u-boot
> The phy_connect_dev(...) function from phy.c does all the handling
> (inclusive catching fixed-link).
> So we drop here the single steps and call just phy_connect_dev(...).
> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-13 8:28 [U-Boot] [PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic sbabic at denx.de @ 2019-03-25 16:07 ` Marcel Ziswiler 2019-03-25 22:13 ` Lukasz Majewski ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Marcel Ziswiler @ 2019-03-25 16:07 UTC (permalink / raw) To: u-boot Hi Stefano On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: > > The phy_connect_dev(...) function from phy.c does all the handling > > (inclusive catching fixed-link). > > So we drop here the single steps and call just > > phy_connect_dev(...). > > Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com > > > > > Acked-by: Joe Hershberger <joe.hershberger@ni.com> > > Applied to u-boot-imx, master, thanks ! > > Best regards, > Stefano Babic Unfortunately, this commit broke Ethernet on the Vybrid. When re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, device tree enablement and driver model conversion") I noticed that Ethernet no longer works giving the following error messages: Net: Could not get PHY for FEC0: addr -19 eth-1: fec at 400d1000 Colibri VFxx # dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 Colibri VFxx # Bisecting points to this commit and reverting it indeed makes it work again. Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? Cheers Marcel ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-25 16:07 ` [U-Boot] [REGRESSION: PATCH " Marcel Ziswiler @ 2019-03-25 22:13 ` Lukasz Majewski 2019-03-28 10:47 ` Lukasz Majewski 2019-03-26 9:02 ` [U-Boot] " Hannes Schmelzer 2019-03-26 9:15 ` Hannes Schmelzer 2 siblings, 1 reply; 9+ messages in thread From: Lukasz Majewski @ 2019-03-25 22:13 UTC (permalink / raw) To: u-boot Hi Marcel, > Hi Stefano > > On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: > > > The phy_connect_dev(...) function from phy.c does all the handling > > > (inclusive catching fixed-link). > > > So we drop here the single steps and call just > > > phy_connect_dev(...). > > > Signed-off-by: Hannes Schmelzer > > > <hannes.schmelzer@br-automation.com > > > > > > > Acked-by: Joe Hershberger <joe.hershberger@ni.com> > > > > Applied to u-boot-imx, master, thanks ! > > > > Best regards, > > Stefano Babic > > Unfortunately, this commit broke Ethernet on the Vybrid. When > re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid > fixes, device tree enablement and driver model conversion") I noticed > that Ethernet no longer works giving the following error messages: > > Net: Could not get PHY for FEC0: addr -19 > eth-1: fec at 400d1000 > Colibri VFxx # dhcp > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > No ethernet found. > Could not get PHY for FEC0: addr -19 > Colibri VFxx # > > Bisecting points to this commit and reverting it indeed makes it work > again. > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? I did not checked yet - as I was waiting for the code to settle down to mainline (after the v2019.04 u-boot release). I will check it on bk4. > > Cheers > > Marcel Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190325/74ce3e98/attachment.sig> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-25 22:13 ` Lukasz Majewski @ 2019-03-28 10:47 ` Lukasz Majewski 2019-03-28 11:04 ` [U-Boot] Antwort: " Hannes Schmelzer 0 siblings, 1 reply; 9+ messages in thread From: Lukasz Majewski @ 2019-03-28 10:47 UTC (permalink / raw) To: u-boot Dear Tom, Marcel, Stefano > Hi Marcel, > > > Hi Stefano > > > > On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: > > > > The phy_connect_dev(...) function from phy.c does all the > > > > handling (inclusive catching fixed-link). > > > > So we drop here the single steps and call just > > > > phy_connect_dev(...). > > > > Signed-off-by: Hannes Schmelzer > > > > <hannes.schmelzer@br-automation.com > > > > > > > > > Acked-by: Joe Hershberger <joe.hershberger@ni.com> > > > > > > Applied to u-boot-imx, master, thanks ! > > > > > > Best regards, > > > Stefano Babic > > > > Unfortunately, this commit broke Ethernet on the Vybrid. When > > re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid > > fixes, device tree enablement and driver model conversion") I > > noticed that Ethernet no longer works giving the following error > > messages: > > > > Net: Could not get PHY for FEC0: addr -19 > > eth-1: fec at 400d1000 > > Colibri VFxx # dhcp > > Could not get PHY for FEC0: addr -19 > > Could not get PHY for FEC0: addr -19 > > Could not get PHY for FEC0: addr -19 > > Could not get PHY for FEC0: addr -19 > > No ethernet found. > > Could not get PHY for FEC0: addr -19 > > Colibri VFxx # > > > > Bisecting points to this commit and reverting it indeed makes it > > work again. > > > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? > > I did not checked yet - as I was waiting for the code to settle down > to mainline (after the v2019.04 u-boot release). > > I will check it on bk4. Maybe not on BK4, but surely on (HSC): CPU: Freescale i.MX53 rev2.1 at 800 MHz => dhcp Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 Could not get PHY for FEC0: addr -19 No ethernet found. Could not get PHY for FEC0: addr -19 I can confirm the error. So I do expect that we have some more IMX boards broken (imx53, vybrid). I think that it would be best to revert this patch before v2019.04 release and look for clean up opportunities afterwards. > > > > > Cheers > > > > Marcel > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > lukma at denx.de Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190328/38c557e0/attachment.sig> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] Antwort: Re: [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-28 10:47 ` Lukasz Majewski @ 2019-03-28 11:04 ` Hannes Schmelzer 0 siblings, 0 replies; 9+ messages in thread From: Hannes Schmelzer @ 2019-03-28 11:04 UTC (permalink / raw) To: u-boot HI Lukas, please can you test with this patch: But i agree, for 2019.04 it would be ok reverting this and then look if the provided patch can be applied. Joe, what do you mean? cheers, Hannes Lukasz Majewski <lukma@denx.de> schrieb am 28.03.2019 11:47:34: > Von: Lukasz Majewski <lukma@denx.de> > An: Marcel Ziswiler <marcel.ziswiler@toradex.com>, "sbabic at denx.de" > <sbabic@denx.de>, Tom Rini <trini@konsulko.com> > Kopie: "u-boot at lists.denx.de" <u-boot@lists.denx.de>, "hannes.schmelzer at br- > automation.com" <hannes.schmelzer@br-automation.com>, Joe Hershberger > <joe.hershberger@ni.com> > Datum: 28.03.2019 11:47 > Betreff: Re: [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic > > Dear Tom, Marcel, Stefano > > > Hi Marcel, > > > > > Hi Stefano > > > > > > On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: > > > > > The phy_connect_dev(...) function from phy.c does all the > > > > > handling (inclusive catching fixed-link). > > > > > So we drop here the single steps and call just > > > > > phy_connect_dev(...). > > > > > Signed-off-by: Hannes Schmelzer > > > > > <hannes.schmelzer@br-automation.com > > > > > > > > > > > Acked-by: Joe Hershberger <joe.hershberger@ni.com> > > > > > > > > Applied to u-boot-imx, master, thanks ! > > > > > > > > Best regards, > > > > Stefano Babic > > > > > > Unfortunately, this commit broke Ethernet on the Vybrid. When > > > re-basing my Colibri VF50/VF61 clean-up patch set ("colibri vybrid > > > fixes, device tree enablement and driver model conversion") I > > > noticed that Ethernet no longer works giving the following error > > > messages: > > > > > > Net: Could not get PHY for FEC0: addr -19 > > > eth-1: fec at 400d1000 > > > Colibri VFxx # dhcp > > > Could not get PHY for FEC0: addr -19 > > > Could not get PHY for FEC0: addr -19 > > > Could not get PHY for FEC0: addr -19 > > > Could not get PHY for FEC0: addr -19 > > > No ethernet found. > > > Could not get PHY for FEC0: addr -19 > > > Colibri VFxx # > > > > > > Bisecting points to this commit and reverting it indeed makes it > > > work again. > > > > > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? > > > > I did not checked yet - as I was waiting for the code to settle down > > to mainline (after the v2019.04 u-boot release). > > > > I will check it on bk4. > > Maybe not on BK4, but surely on (HSC): > CPU: Freescale i.MX53 rev2.1 at 800 MHz > > => dhcp > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > No ethernet found. > Could not get PHY for FEC0: addr -19 > > I can confirm the error. > > So I do expect that we have some more IMX boards broken (imx53, vybrid). > > I think that it would be best to revert this patch before v2019.04 > release and look for clean up opportunities afterwards. > > > > > > > > > > > Cheers > > > > > > Marcel > > > > > > > > > > Best regards, > > > > Lukasz Majewski > > > > -- > > > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > > lukma at denx.de > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de > [Anhang "att09yen.dat" gelöscht von Hannes Schmelzer/Gilgenberg/AT/B&R] -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-drivers-net-phy-catch-negative-phy-adresses.patch Type: application/octet-stream Size: 1209 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190328/b36ebcfb/attachment.obj> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-25 16:07 ` [U-Boot] [REGRESSION: PATCH " Marcel Ziswiler 2019-03-25 22:13 ` Lukasz Majewski @ 2019-03-26 9:02 ` Hannes Schmelzer 2019-03-26 9:15 ` Hannes Schmelzer 2 siblings, 0 replies; 9+ messages in thread From: Hannes Schmelzer @ 2019-03-26 9:02 UTC (permalink / raw) To: u-boot On 3/25/19 5:07 PM, Marcel Ziswiler wrote: > Hi Stefano > > On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: >>> The phy_connect_dev(...) function from phy.c does all the handling >>> (inclusive catching fixed-link). >>> So we drop here the single steps and call just >>> phy_connect_dev(...). >>> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com >>> Acked-by: Joe Hershberger <joe.hershberger@ni.com> >> Applied to u-boot-imx, master, thanks ! >> >> Best regards, >> Stefano Babic > Unfortunately, this commit broke Ethernet on the Vybrid. When re-basing > my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, device > tree enablement and driver model conversion") I noticed that Ethernet > no longer works giving the following error messages: > > Net: Could not get PHY for FEC0: addr -19 > eth-1: fec at 400d1000 > Colibri VFxx # dhcp > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > No ethernet found. > Could not get PHY for FEC0: addr -19 > Colibri VFxx # > > Bisecting points to this commit and reverting it indeed makes it work > again. > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? Hi, sorry for that issue. I will look into tomorrow, to see what happens there. cheers, Hannes ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-25 16:07 ` [U-Boot] [REGRESSION: PATCH " Marcel Ziswiler 2019-03-25 22:13 ` Lukasz Majewski 2019-03-26 9:02 ` [U-Boot] " Hannes Schmelzer @ 2019-03-26 9:15 ` Hannes Schmelzer 2019-03-26 10:34 ` Marcel Ziswiler 2 siblings, 1 reply; 9+ messages in thread From: Hannes Schmelzer @ 2019-03-26 9:15 UTC (permalink / raw) To: u-boot On 3/25/19 5:07 PM, Marcel Ziswiler wrote: > Hi Stefano > > On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: >>> The phy_connect_dev(...) function from phy.c does all the handling >>> (inclusive catching fixed-link). >>> So we drop here the single steps and call just >>> phy_connect_dev(...). >>> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com >>> Acked-by: Joe Hershberger <joe.hershberger@ni.com> >> Applied to u-boot-imx, master, thanks ! >> >> Best regards, >> Stefano Babic > Unfortunately, this commit broke Ethernet on the Vybrid. When re-basing > my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, device > tree enablement and driver model conversion") I noticed that Ethernet > no longer works giving the following error messages: > > Net: Could not get PHY for FEC0: addr -19 > eth-1: fec at 400d1000 > Colibri VFxx # dhcp > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > Could not get PHY for FEC0: addr -19 > No ethernet found. > Could not get PHY for FEC0: addr -19 > Colibri VFxx # > > Bisecting points to this commit and reverting it indeed makes it work > again. > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? > > Cheers > > Marcel > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > https://lists.denx.de/listinfo/u-boot Hi Marcel, does this board use DM ? which defconfig uses the board? cheers, Hannes ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic 2019-03-26 9:15 ` Hannes Schmelzer @ 2019-03-26 10:34 ` Marcel Ziswiler [not found] ` <a15ae90f-044f-e3d7-97d4-e80f00c8f713@schmelzer.or.at> 0 siblings, 1 reply; 9+ messages in thread From: Marcel Ziswiler @ 2019-03-26 10:34 UTC (permalink / raw) To: u-boot Hi Hannes On Tue, 2019-03-26 at 10:15 +0100, Hannes Schmelzer wrote: > On 3/25/19 5:07 PM, Marcel Ziswiler wrote: > > Hi Stefano > > > > On Wed, 2019-03-13 at 08:28 +0000, sbabic at denx.de wrote: > > > > The phy_connect_dev(...) function from phy.c does all the > > > > handling > > > > (inclusive catching fixed-link). > > > > So we drop here the single steps and call just > > > > phy_connect_dev(...). > > > > Signed-off-by: Hannes Schmelzer < > > > > hannes.schmelzer at br-automation.com > > > > Acked-by: Joe Hershberger <joe.hershberger@ni.com> > > > Applied to u-boot-imx, master, thanks ! > > > > > > Best regards, > > > Stefano Babic > > Unfortunately, this commit broke Ethernet on the Vybrid. When re- > > basing > > my Colibri VF50/VF61 clean-up patch set ("colibri vybrid fixes, > > device > > tree enablement and driver model conversion") I noticed that > > Ethernet > > no longer works giving the following error messages: > > > > Net: Could not get PHY for FEC0: addr -19 > > eth-1: fec at 400d1000 > > Colibri VFxx # dhcp > > Could not get PHY for FEC0: addr -19 > > Could not get PHY for FEC0: addr -19 > > Could not get PHY for FEC0: addr -19 > > Could not get PHY for FEC0: addr -19 > > No ethernet found. > > Could not get PHY for FEC0: addr -19 > > Colibri VFxx # > > > > Bisecting points to this commit and reverting it indeed makes it > > work > > again. > > > > Has anybody else seen a similar issue (e.g. @Lukasz on pcm052)? > > > > Cheers > > > > Marcel > > _______________________________________________ > > U-Boot mailing list > > U-Boot at lists.denx.de > > https://lists.denx.de/listinfo/u-boot > Hi Marcel, > does this board use DM ? Yes, I moved it to DM. The latest patch set is the following: https://patchwork.ozlabs.org/cover/1064570/ Also available on our git server here: http://git.toradex.com/cgit/u-boot-toradex.git/log/?h=for-next > which defconfig uses the board? That would be colibri_vf_defconfig. > cheers, > Hannes Cheers Marcel ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <a15ae90f-044f-e3d7-97d4-e80f00c8f713@schmelzer.or.at>]
[parent not found: <a1322b72c77a87656157799dd1f48600cbb36c55.camel@toradex.com>]
[parent not found: <697EBFC1-D953-45F7-A781-732BB79AD510@schmelzer.or.at>]
[parent not found: <371b0c7b1f460192931715bbb1479174f0d13389.camel@toradex.com>]
* [U-Boot] [REGRESSION: PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic [not found] ` <371b0c7b1f460192931715bbb1479174f0d13389.camel@toradex.com> @ 2019-03-27 13:21 ` Hannes Schmelzer 0 siblings, 0 replies; 9+ messages in thread From: Hannes Schmelzer @ 2019-03-27 13:21 UTC (permalink / raw) To: u-boot On 3/26/19 1:08 PM, Marcel Ziswiler wrote: > Hi Hannes Hi Marcel, thanks for helping me working on this. > > On Tue, 2019-03-26 at 12:57 +0100, Hannes Schmelzer wrote: >> Hi marcel, >> >> Okay. Behaviour is now clear to me. >> You don't have a phy node within your dts > We never ever had any such anywhere but it still used to work just fine > so far. Before that you didn't operate the FEC with DM i think, so there was no description at all. > >> nor you have MXC_PHY_ADDR set in your board header. > I actually once even tried setting that without success but maybe I did > it wrong. Sorry, the correct name of the #define is 'CONFIG_FEC_MXC_PHYADDR'. Prior converting your board to DM you had here: #define CONFIG_FEC_MXC_PHYADDR 0 > >> The implicit fallback mechanism for searching the whole mdio bus for >> st least one phy has been gone with my patch. > OK, maybe I just missed noticing such behavioural change having been > advertised anywhere. There was no explicit notice, it did happen ;-) I didn't expect that there is somebody who neither defines a phy-adress within dts nor board-header. > >> Could you try describing your phy within dts to get sure that iam >> right here. > Sure, let me try that. Did you have success in this? > >> Later on we have to discuss if the 'fallback' should be re >> implemented. > Yeah, I assume such behavioural change breaks other boards as well. Mhm, you're right - i will provide a patch to the mailinglist for catching this. But in general, a precise description of the hardware would be the better way. cheers, Hannes ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2019-03-28 11:04 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-03-13 8:28 [U-Boot] [PATCH 34/34] drivers/net/fec: phy_init: remove redundant logic sbabic at denx.de 2019-03-25 16:07 ` [U-Boot] [REGRESSION: PATCH " Marcel Ziswiler 2019-03-25 22:13 ` Lukasz Majewski 2019-03-28 10:47 ` Lukasz Majewski 2019-03-28 11:04 ` [U-Boot] Antwort: " Hannes Schmelzer 2019-03-26 9:02 ` [U-Boot] " Hannes Schmelzer 2019-03-26 9:15 ` Hannes Schmelzer 2019-03-26 10:34 ` Marcel Ziswiler [not found] ` <a15ae90f-044f-e3d7-97d4-e80f00c8f713@schmelzer.or.at> [not found] ` <a1322b72c77a87656157799dd1f48600cbb36c55.camel@toradex.com> [not found] ` <697EBFC1-D953-45F7-A781-732BB79AD510@schmelzer.or.at> [not found] ` <371b0c7b1f460192931715bbb1479174f0d13389.camel@toradex.com> 2019-03-27 13:21 ` Hannes Schmelzer
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.