* Re: Re: Leadtek Winfast TV2100
@ 2010-01-03 15:37 dz-tor
2010-01-08 19:34 ` hermann pitton
0 siblings, 1 reply; 20+ messages in thread
From: dz-tor @ 2010-01-03 15:37 UTC (permalink / raw)
To: hermann-pitton, terrywu2009, pavle.predic; +Cc: video4linux-list
Hi,
I want to ask whether you are working on this 'issue'. I'm interested in
the subject, as I'm owner of this card and cannot get this stuff to work
- I've picture, no sound. Earlier you have written, that you can provide
patches for testing. If offer is still actual, I can test them.
Currently I'm using kernel 2.6.31, but if it's a problem I can switch to
2.6.32.
As I wrote earlier I have the same card - Winfast TV2100 with FM, tv
norm used in my country is PAL (I'm from Poland).
Regards,
Darek
>
>> Hey guys,
>>
>> Let me start by thanking you both for all your help. Unfortunately,
>> there isn't much I can do with the data you provided - it's way too
>> technical for me. I'd be happy to do any tests and apply any patches,
>> but I would need some instructions - but only if you have time; I
>> really don't want to burden you with this.
>>
>> Thanks again,
>>
>> Pavle.
>>
>>
>>
>> ________________________________
>> From: hermann pitton<hermann-pitton@arcor.de>
>> To: Terry Wu<terrywu2009@gmail.com>
>> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com
>> Sent: Sat, 28 November, 2009 4:09:28
>> Subject: Re: Re: Leadtek Winfast TV2100
>>
>> Hi Terry Wu,
>>
>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu:
>> > Hi,
>> >
>> > Here are the subsystem IDs for different TV2100 models:
>> > Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK)
>> > Subsystem ID:0x6f32107d, TVF5533-MF (NTSC)
>> > Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM)
>> >
>> > Terry
>>
>> better is to become active on it.
>>
>> we can most likely help about how to match such tuners fine,
>> if any doubts left, but the best is to send just patches with having
>> such hardware to test on.
>>
>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was
>> pioneering and we have that in mind, it should be fairly easy for those.
>>
>> Let's know the other way round too, where you have still concerns doing
>> so.
>>
>> Cheers,
>> Hermann
>>
>> > 2009/11/23 hermann pitton<hermann-pitton@arcor.de>:
>> > > Hi, thanks again!
>> > >
>> > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu:
>> > >> Hi,
>> > >>
>> > >> Please refer to the attached JPEG file for the GPIO
>> settings of
>> > >> TV2100 with FM (PCB:B).
>> > >>
>> > >> Let me know if you need the information of TV2100 without FM
>> > >> (PCB:A, TVF8533-BDF).
>> > >>
>> > >> Terry Wu
>> > >
>> > > On a first look, if we start to count gpios from zero, we tell
>> the same.
>> > >
>> > > The TVF8533_BDF I would have to look up. It is four to five
>> years back.
>> > >
>> > > If it uses that minor number TI chip without radio support, we
>> treat it
>> > > as tuner=69 too currently.
>> > >
>> > > For all such older can tuners, widely different about the globe,
>> counts,
>> > > that we don't have any way to detect them. So first working,
>> either NTSC
>> > > or PAL, sits in the pool position and others have to think twice.
>> > >
>> > > OEMs do code tuners into eeprom content, some do not at all,
>> such doing
>> > > it are in competition and don't follow the rules of the main chip
>> > > manufacturer, Philips/NXP in that case, and go their own ways.
>> > >
>> > > So tuner tables are unstable across manufacturers.
>> > >
>> > > We often can't help that much in such cases, but implementing
>> their own
>> > > tuner eeprom detection into the linux drivers is of course still
>> > > welcome. Hauppauge does it very successfully since years.
>> > >
>> > > We can't do much about it, if OEMs don't follow Philips or whom
>> ever on
>> > > such.
>> > >
>> > > Thanks,
>> > > Hermann
>> > >
>> > >
>> > >>
>> > >> 2009/11/23 Terry Wu<terrywu2009@gmail.com>:
>> > >> > Hi,
>> > >> >
>> > >> > The TVF88T5-BDFF data sheet is attached.
>> > >> >
>> > >> > Terry Wu
>> > >> >
>> > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf
>> > >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf
>> > >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf
>> > >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf
>> > >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf
>> > >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf
>> > >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf
>> > >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf
>> > >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf
>> > >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf
>> > >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf
>> > >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf
>> > >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf
>> > >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf
>> > >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf
>> > >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf
>> > >> >
>> > >
>> > >
>> > >
>>
>>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 20+ messages in thread* Re: Re: Leadtek Winfast TV2100 2010-01-03 15:37 Re: Leadtek Winfast TV2100 dz-tor @ 2010-01-08 19:34 ` hermann pitton 2010-01-08 20:24 ` Blackmagic SDI card --> v4l2 ready ? Mars Forest 2010-01-08 22:56 ` Leadtek Winfast TV2100 dz-tor 0 siblings, 2 replies; 20+ messages in thread From: hermann pitton @ 2010-01-08 19:34 UTC (permalink / raw) To: dz-tor; +Cc: video4linux-list Hi, Am Sonntag, den 03.01.2010, 16:37 +0100 schrieb dz-tor: > Hi, > > I want to ask whether you are working on this 'issue'. I'm interested in > the subject, as I'm owner of this card and cannot get this stuff to work > - I've picture, no sound. Earlier you have written, that you can provide > patches for testing. If offer is still actual, I can test them. > Currently I'm using kernel 2.6.31, but if it's a problem I can switch to > 2.6.32. > > As I wrote earlier I have the same card - Winfast TV2100 with FM, tv > norm used in my country is PAL (I'm from Poland). > > Regards, > Darek please have a look at the xtal/oscillator close to the saa713x chip. It can have two different values. See README.saa7134 in Documentation. I'll provide a patch with best guessing based on the regspy.exe results then, assuming all is connected to LINE2 and routed through the external mux chip as a start. If that fails, we try with LINE1 next. Cheers, Hermann > > > >> Hey guys, > >> > >> Let me start by thanking you both for all your help. Unfortunately, > >> there isn't much I can do with the data you provided - it's way too > >> technical for me. I'd be happy to do any tests and apply any patches, > >> but I would need some instructions - but only if you have time; I > >> really don't want to burden you with this. > >> > >> Thanks again, > >> > >> Pavle. > >> > >> > >> > >> ________________________________ > >> From: hermann pitton<hermann-pitton@arcor.de> > >> To: Terry Wu<terrywu2009@gmail.com> > >> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com > >> Sent: Sat, 28 November, 2009 4:09:28 > >> Subject: Re: Re: Leadtek Winfast TV2100 > >> > >> Hi Terry Wu, > >> > >> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: > >> > Hi, > >> > > >> > Here are the subsystem IDs for different TV2100 models: > >> > Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) > >> > Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) > >> > Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) > >> > > >> > Terry > >> > >> better is to become active on it. > >> > >> we can most likely help about how to match such tuners fine, > >> if any doubts left, but the best is to send just patches with having > >> such hardware to test on. > >> > >> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was > >> pioneering and we have that in mind, it should be fairly easy for those. > >> > >> Let's know the other way round too, where you have still concerns doing > >> so. > >> > >> Cheers, > >> Hermann > >> > >> > 2009/11/23 hermann pitton<hermann-pitton@arcor.de>: > >> > > Hi, thanks again! > >> > > > >> > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: > >> > >> Hi, > >> > >> > >> > >> Please refer to the attached JPEG file for the GPIO > >> settings of > >> > >> TV2100 with FM (PCB:B). > >> > >> > >> > >> Let me know if you need the information of TV2100 without FM > >> > >> (PCB:A, TVF8533-BDF). > >> > >> > >> > >> Terry Wu > >> > > > >> > > On a first look, if we start to count gpios from zero, we tell > >> the same. > >> > > > >> > > The TVF8533_BDF I would have to look up. It is four to five > >> years back. > >> > > > >> > > If it uses that minor number TI chip without radio support, we > >> treat it > >> > > as tuner=69 too currently. > >> > > > >> > > For all such older can tuners, widely different about the globe, > >> counts, > >> > > that we don't have any way to detect them. So first working, > >> either NTSC > >> > > or PAL, sits in the pool position and others have to think twice. > >> > > > >> > > OEMs do code tuners into eeprom content, some do not at all, > >> such doing > >> > > it are in competition and don't follow the rules of the main chip > >> > > manufacturer, Philips/NXP in that case, and go their own ways. > >> > > > >> > > So tuner tables are unstable across manufacturers. > >> > > > >> > > We often can't help that much in such cases, but implementing > >> their own > >> > > tuner eeprom detection into the linux drivers is of course still > >> > > welcome. Hauppauge does it very successfully since years. > >> > > > >> > > We can't do much about it, if OEMs don't follow Philips or whom > >> ever on > >> > > such. > >> > > > >> > > Thanks, > >> > > Hermann > >> > > > >> > > > >> > >> > >> > >> 2009/11/23 Terry Wu<terrywu2009@gmail.com>: > >> > >> > Hi, > >> > >> > > >> > >> > The TVF88T5-BDFF data sheet is attached. > >> > >> > > >> > >> > Terry Wu > >> > >> > > >> > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > >> > >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > >> > >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > >> > >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > >> > >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > >> > >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > >> > >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > >> > >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > >> > >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > >> > >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > >> > >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > >> > >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > >> > >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > >> > >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > >> > >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > >> > >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > >> > >> > > >> > > > >> > > > >> > > > >> > >> -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Blackmagic SDI card --> v4l2 ready ? 2010-01-08 19:34 ` hermann pitton @ 2010-01-08 20:24 ` Mars Forest 2010-01-08 20:32 ` Mars Forest 2010-01-08 22:56 ` Leadtek Winfast TV2100 dz-tor 1 sibling, 1 reply; 20+ messages in thread From: Mars Forest @ 2010-01-08 20:24 UTC (permalink / raw) To: video4linux-list Just a quick question to see if Blackmagic's SDI card (I just have the basic one, not the studio or the extreme) is working under Video4Linux? I have successfully tested this card using the bundled software (for Ubuntu) but I am getting this error when trying to capture from it with VLC: *[0x2a3e828] v2l2 demux warning: FIXME: v4l2.c ControlListPrint 2738* cheers, forest mars -- mnn: you're what's on! http://mnn.org -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Blackmagic SDI card --> v4l2 ready ? 2010-01-08 20:24 ` Blackmagic SDI card --> v4l2 ready ? Mars Forest @ 2010-01-08 20:32 ` Mars Forest 2010-01-11 13:57 ` Rafael Diniz 0 siblings, 1 reply; 20+ messages in thread From: Mars Forest @ 2010-01-08 20:32 UTC (permalink / raw) To: video4linux-list Mars Forest wrote: > Just a quick question to see if Blackmagic's SDI card (I just have the > basic one, not the studio or the extreme) is working under Video4Linux? > > I have successfully tested this card using the bundled software (for > Ubuntu) but I am getting this error when trying to capture from it > with VLC: > > *[0x2a3e828] v2l2 demux warning: FIXME: v4l2.c ControlListPrint 2738* > Since this question was rather quickly answered on IRC ("none of Blackmagic's cards work with v4l.") I am now looking for a recommendation on a good card to replace this one. I am running Debian/Ubuntu on a Sunfire x2200. Looking for a half-length PCI-E SDI video capture card that will work with v4l2/VLC. What's the best choice here? > cheers, > > forest mars > -- > mnn: you're what's on! > http://mnn.org > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Blackmagic SDI card --> v4l2 ready ? 2010-01-08 20:32 ` Mars Forest @ 2010-01-11 13:57 ` Rafael Diniz 0 siblings, 0 replies; 20+ messages in thread From: Rafael Diniz @ 2010-01-11 13:57 UTC (permalink / raw) To: video4linux-list I think it would be interesting to write a V4L2 driver for the BlackMagic cards using the code already released by BM for the very low level kernel driver and some reverse engineering. Rafael Diniz On Friday 08 January 2010 18:32:09 Mars Forest wrote: > Mars Forest wrote: > > Just a quick question to see if Blackmagic's SDI card (I just have the > > basic one, not the studio or the extreme) is working under Video4Linux? > > > > I have successfully tested this card using the bundled software (for > > Ubuntu) but I am getting this error when trying to capture from it > > with VLC: > > > > *[0x2a3e828] v2l2 demux warning: FIXME: v4l2.c ControlListPrint 2738* > > Since this question was rather quickly answered on IRC ("none of > Blackmagic's cards work with v4l.") I am now looking for a > recommendation on a good card to replace this one. I am running > Debian/Ubuntu on a Sunfire x2200. > > Looking for a half-length PCI-E SDI video capture card that will work > with v4l2/VLC. > > What's the best choice here? > > > cheers, > > > > forest mars > > -- > > mnn: you're what's on! > > http://mnn.org > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/video4linux-list -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Leadtek Winfast TV2100 2010-01-08 19:34 ` hermann pitton 2010-01-08 20:24 ` Blackmagic SDI card --> v4l2 ready ? Mars Forest @ 2010-01-08 22:56 ` dz-tor 2010-01-09 14:46 ` Pavle Predic 1 sibling, 1 reply; 20+ messages in thread From: dz-tor @ 2010-01-08 22:56 UTC (permalink / raw) To: hermann pitton; +Cc: video4linux-list Hi, My friend helped me a little and we managed card to work, i.e. TV (only mono, I suppose that stereo is not available for this card), s-video, composite and radio works fine. We've tried setting audio_clock to both values (32.11 MHz -> .audio_clock=0x187de7 and 24.576MHz -> .audio_clock=0x200000) and both works - for me it seems, that for 32.11 MHz sound is better (i.e. louder). Now I have only one problem with ir. We succeeded to enable it, but reading from it is bit weird - sometimes when I press the key, no event is generated, sometimes 2 (key pressed/released) and sometimes more. Have any clue what can cause that? Output from dmesg when module is loaded: [32627.844221] saa7130/34: v4l2 driver version 0.2.15 loaded [32627.844294] saa7130[0]: found at 0000:01:09.0, rev: 1, irq: 17, latency: 32, mmio: 0xe7001000 [32627.844303] saa7130[0]: subsystem: 107d:6f3a, board: Proteus Pro [philips reference design] [card=1,insmod option] [32627.844340] saa7130[0]: board init: gpio is 60a08 [32627.844351] saa7130[0]: gpio: mode=0x0000000 in=0x0060a0c out=0x0000000 [pre-init] [32627.844901] input: saa7134 IR (Proteus Pro [philip as /devices/pci0000:00/0000:00:08.0/0000:01:09.0/input/input15 [32627.845064] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs [32628.028017] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [32628.028029] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff [32628.028038] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 ff 00 8c ff ff ff ff [32628.028047] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028056] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 ff ff ff ff ff ff ff [32628.028064] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028073] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028082] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028091] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028099] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028108] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028117] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028126] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028134] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028143] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028152] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028163] i2c i2c-2: Invalid 7-bit address 0x7a [32628.036120] tuner 2-0061: chip found @ 0xc2 (saa7130[0]) [32628.044037] tuner-simple 2-0061: creating new instance [32628.044044] tuner-simple 2-0061: type set to 69 (Tena TNF 5335 and similar models) [32628.052058] saa7130[0]: gpio: mode=0x000000d in=0x0060a00 out=0x0000008 [mute] [32628.052178] saa7130[0]: registered device video1 [v4l2] [32628.052205] saa7130[0]: registered device vbi0 [32628.052232] saa7130[0]: registered device radio0 For testing we've used existing card (card=1 - Proteus Pro) with tuner 69. When everything will be working ok, my friend will try to add new card definition and generate the patch. Below you can find actual code modified by us: saa7134-cards.c struct saa7134_board saa7134_boards[] = { ... [SAA7134_BOARD_PROTEUS_PRO] = { /* /me */ .name = "Proteus Pro [philips reference design]", .audio_clock = 0x00187de7, .tuner_type = TUNER_TNF_5335MF, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x0d, .inputs = {{ .name = name_comp1, .vmux = 3, .amux = LINE2, .gpio = 0x08, },{ .name = name_tv, .vmux = 1, .amux = LINE1, .tv = 1, },{ .name = name_tv_mono, .vmux = 1, .amux = LINE1, .tv = 1, },{ .name = name_svideo, .vmux = 8, .amux = LINE2, .gpio = 0x08, }}, .radio = { .name = name_radio, .amux = LINE1, .gpio = 0x04, }, .mute = { .name = name_mute, .amux = TV, .gpio = 0x08, }, }, int saa7134_board_init1(struct saa7134_dev *dev) { ... case SAA7134_BOARD_PROTEUS_PRO: dev->has_remote = SAA7134_REMOTE_GPIO; break; saa7134-input.c int saa7134_input_init1(struct saa7134_dev *dev) { case SAA7134_BOARD_PROTEUS_PRO: ir_codes = &ir_codes_avermedia_table; mask_keycode = 0x000000; polling = 50; // ms Regards, Darek On 08.01.2010 20:34, hermann pitton wrote: > Hi, > > Am Sonntag, den 03.01.2010, 16:37 +0100 schrieb dz-tor: > >> Hi, >> >> I want to ask whether you are working on this 'issue'. I'm interested in >> the subject, as I'm owner of this card and cannot get this stuff to work >> - I've picture, no sound. Earlier you have written, that you can provide >> patches for testing. If offer is still actual, I can test them. >> Currently I'm using kernel 2.6.31, but if it's a problem I can switch to >> 2.6.32. >> >> As I wrote earlier I have the same card - Winfast TV2100 with FM, tv >> norm used in my country is PAL (I'm from Poland). >> >> Regards, >> Darek >> > please have a look at the xtal/oscillator close to the saa713x chip. > > It can have two different values. See README.saa7134 in Documentation. > > I'll provide a patch with best guessing based on the regspy.exe results > then, assuming all is connected to LINE2 and routed through the external > mux chip as a start. If that fails, we try with LINE1 next. > > Cheers, > Hermann > > > >>> >>>> Hey guys, >>>> >>>> Let me start by thanking you both for all your help. Unfortunately, >>>> there isn't much I can do with the data you provided - it's way too >>>> technical for me. I'd be happy to do any tests and apply any patches, >>>> but I would need some instructions - but only if you have time; I >>>> really don't want to burden you with this. >>>> >>>> Thanks again, >>>> >>>> Pavle. >>>> >>>> >>>> >>>> ________________________________ >>>> From: hermann pitton<hermann-pitton@arcor.de> >>>> To: Terry Wu<terrywu2009@gmail.com> >>>> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com >>>> Sent: Sat, 28 November, 2009 4:09:28 >>>> Subject: Re: Re: Leadtek Winfast TV2100 >>>> >>>> Hi Terry Wu, >>>> >>>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: >>>> >>>>> Hi, >>>>> >>>>> Here are the subsystem IDs for different TV2100 models: >>>>> Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) >>>>> Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) >>>>> Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) >>>>> >>>>> Terry >>>>> >>>> better is to become active on it. >>>> >>>> we can most likely help about how to match such tuners fine, >>>> if any doubts left, but the best is to send just patches with having >>>> such hardware to test on. >>>> >>>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was >>>> pioneering and we have that in mind, it should be fairly easy for those. >>>> >>>> Let's know the other way round too, where you have still concerns doing >>>> so. >>>> >>>> Cheers, >>>> Hermann >>>> >>>> >>>>> 2009/11/23 hermann pitton<hermann-pitton@arcor.de>: >>>>> >>>>>> Hi, thanks again! >>>>>> >>>>>> Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Please refer to the attached JPEG file for the GPIO >>>>>>> >>>> settings of >>>> >>>>>>> TV2100 with FM (PCB:B). >>>>>>> >>>>>>> Let me know if you need the information of TV2100 without FM >>>>>>> (PCB:A, TVF8533-BDF). >>>>>>> >>>>>>> Terry Wu >>>>>>> >>>>>> On a first look, if we start to count gpios from zero, we tell >>>>>> >>>> the same. >>>> >>>>>> The TVF8533_BDF I would have to look up. It is four to five >>>>>> >>>> years back. >>>> >>>>>> If it uses that minor number TI chip without radio support, we >>>>>> >>>> treat it >>>> >>>>>> as tuner=69 too currently. >>>>>> >>>>>> For all such older can tuners, widely different about the globe, >>>>>> >>>> counts, >>>> >>>>>> that we don't have any way to detect them. So first working, >>>>>> >>>> either NTSC >>>> >>>>>> or PAL, sits in the pool position and others have to think twice. >>>>>> >>>>>> OEMs do code tuners into eeprom content, some do not at all, >>>>>> >>>> such doing >>>> >>>>>> it are in competition and don't follow the rules of the main chip >>>>>> manufacturer, Philips/NXP in that case, and go their own ways. >>>>>> >>>>>> So tuner tables are unstable across manufacturers. >>>>>> >>>>>> We often can't help that much in such cases, but implementing >>>>>> >>>> their own >>>> >>>>>> tuner eeprom detection into the linux drivers is of course still >>>>>> welcome. Hauppauge does it very successfully since years. >>>>>> >>>>>> We can't do much about it, if OEMs don't follow Philips or whom >>>>>> >>>> ever on >>>> >>>>>> such. >>>>>> >>>>>> Thanks, >>>>>> Hermann >>>>>> >>>>>> >>>>>> >>>>>>> 2009/11/23 Terry Wu<terrywu2009@gmail.com>: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> The TVF88T5-BDFF data sheet is attached. >>>>>>>> >>>>>>>> Terry Wu >>>>>>>> >>>>>>>> 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf >>>>>>>> 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf >>>>>>>> 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf >>>>>>>> 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf >>>>>>>> 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf >>>>>>>> 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf >>>>>>>> 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf >>>>>>>> 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf >>>>>>>> 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf >>>>>>>> 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf >>>>>>>> 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf >>>>>>>> 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf >>>>>>>> 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf >>>>>>>> 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf >>>>>>>> 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf >>>>>>>> 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>>>> >>>> >>>> > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Leadtek Winfast TV2100 2010-01-08 22:56 ` Leadtek Winfast TV2100 dz-tor @ 2010-01-09 14:46 ` Pavle Predic 2010-01-09 16:23 ` dz-tor 0 siblings, 1 reply; 20+ messages in thread From: Pavle Predic @ 2010-01-09 14:46 UTC (permalink / raw) To: dz-tor; +Cc: video4linux-list Hey Darek, Great job of making the card work. I was really thrilled when I saw your post. However, I am a total newbie, so I couldn't apply the changes you wrote about. Could you please be a bit more specific? What I did is downloaded the driver from here: http://dl.bytesex.org/releases/video4linux/saa7134-0.2.12.tar.gz and made the changes to those two files, as described. But I have no clue how to compile it. I installed linux-headers for my kernel version and tried to run make, but I'm getting an error. Are there any configuration options that I need to set in Makefile or Make.config? Cheers, Pavle. PS My kernel is 2.6.26-2-686 (it's a Debian Lenny 503 system). Here is the output produced by make: debian:/home/pavle/saa7134-0.2.12# make make -C /lib/modules/2.6.26-2-686/build SUBDIRS=/home/pavle/saa7134-0.2.12 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.26-2-686' CC [M] /home/pavle/saa7134-0.2.12/video-buf.o In file included from /home/pavle/saa7134-0.2.12/media/video-buf.h:19, from /home/pavle/saa7134-0.2.12/video-buf.c:33: /home/pavle/saa7134-0.2.12/linux/videodev.h:68: error: field 'class_dev' has incomplete type /home/pavle/saa7134-0.2.12/linux/videodev.h:87: warning: 'struct class_device_attribute' declared inside parameter list /home/pavle/saa7134-0.2.12/linux/videodev.h:87: warning: its scope is only this definition or declaration, which is probably not what you want /home/pavle/saa7134-0.2.12/linux/videodev.h: In function 'video_device_create_file': /home/pavle/saa7134-0.2.12/linux/videodev.h:89: error: implicit declaration of function 'class_device_create_file' /home/pavle/saa7134-0.2.12/linux/videodev.h: At top level: /home/pavle/saa7134-0.2.12/linux/videodev.h:93: warning: 'struct class_device_attribute' declared inside parameter list /home/pavle/saa7134-0.2.12/linux/videodev.h: In function 'video_device_remove_file': /home/pavle/saa7134-0.2.12/linux/videodev.h:95: error: implicit declaration of function 'class_device_remove_file' /home/pavle/saa7134-0.2.12/video-buf.c: At top level: /home/pavle/saa7134-0.2.12/video-buf.c:46: error: expected ')' before string constant /home/pavle/saa7134-0.2.12/video-buf.c: In function 'videobuf_vmalloc_to_sg': /home/pavle/saa7134-0.2.12/video-buf.c:68: error: 'struct scatterlist' has no member named 'page' /home/pavle/saa7134-0.2.12/video-buf.c: In function 'videobuf_pages_to_sg': /home/pavle/saa7134-0.2.12/video-buf.c:96: error: 'struct scatterlist' has no member named 'page' /home/pavle/saa7134-0.2.12/video-buf.c:104: error: 'struct scatterlist' has no member named 'page' /home/pavle/saa7134-0.2.12/video-buf.c: In function 'videobuf_vm_nopage': /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: 'NOPAGE_SIGBUS' undeclared (first use in this function) /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: (Each undeclared identifier is reported only once /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: for each function it appears in.) /home/pavle/saa7134-0.2.12/video-buf.c:1102: error: 'NOPAGE_OOM' undeclared (first use in this function) /home/pavle/saa7134-0.2.12/video-buf.c: At top level: /home/pavle/saa7134-0.2.12/video-buf.c:1119: error: unknown field 'nopage' specified in initializer /home/pavle/saa7134-0.2.12/video-buf.c:1119: warning: initialization from incompatible pointer type make[2]: *** [/home/pavle/saa7134-0.2.12/video-buf.o] Error 1 make[1]: *** [_module_/home/pavle/saa7134-0.2.12] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.26-2-686' make: *** [default] Error 2 ________________________________ From: dz-tor <dz-tor@wp.pl> To: hermann pitton <hermann-pitton@arcor.de> Cc: terrywu2009@gmail.com; pavle.predic@yahoo.co.uk; video4linux-list@redhat.com Sent: Fri, 8 January, 2010 23:56:54 Subject: Re: Leadtek Winfast TV2100 Hi, My friend helped me a little and we managed card to work, i.e. TV (only mono, I suppose that stereo is not available for this card), s-video, composite and radio works fine. We've tried setting audio_clock to both values (32.11 MHz -> .audio_clock=0x187de7 and 24.576MHz -> .audio_clock=0x200000) and both works - for me it seems, that for 32.11 MHz sound is better (i.e. louder). Now I have only one problem with ir. We succeeded to enable it, but reading from it is bit weird - sometimes when I press the key, no event is generated, sometimes 2 (key pressed/released) and sometimes more. Have any clue what can cause that? Output from dmesg when module is loaded: [32627.844221] saa7130/34: v4l2 driver version 0.2.15 loaded [32627.844294] saa7130[0]: found at 0000:01:09.0, rev: 1, irq: 17, latency: 32, mmio: 0xe7001000 [32627.844303] saa7130[0]: subsystem: 107d:6f3a, board: Proteus Pro [philips reference design] [card=1,insmod option] [32627.844340] saa7130[0]: board init: gpio is 60a08 [32627.844351] saa7130[0]: gpio: mode=0x0000000 in=0x0060a0c out=0x0000000 [pre-init] [32627.844901] input: saa7134 IR (Proteus Pro [philip as /devices/pci0000:00/0000:00:08.0/0000:01:09.0/input/input15 [32627.845064] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs [32628.028017] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [32628.028029] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff [32628.028038] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 ff 00 8c ff ff ff ff [32628.028047] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028056] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 ff ff ff ff ff ff ff [32628.028064] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028073] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028082] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028091] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028099] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028108] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028117] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028126] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028134] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028143] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028152] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [32628.028163] i2c i2c-2: Invalid 7-bit address 0x7a [32628.036120] tuner 2-0061: chip found @ 0xc2 (saa7130[0]) [32628.044037] tuner-simple 2-0061: creating new instance [32628.044044] tuner-simple 2-0061: type set to 69 (Tena TNF 5335 and similar models) [32628.052058] saa7130[0]: gpio: mode=0x000000d in=0x0060a00 out=0x0000008 [mute] [32628.052178] saa7130[0]: registered device video1 [v4l2] [32628.052205] saa7130[0]: registered device vbi0 [32628.052232] saa7130[0]: registered device radio0 For testing we've used existing card (card=1 - Proteus Pro) with tuner 69. When everything will be working ok, my friend will try to add new card definition and generate the patch. Below you can find actual code modified by us: saa7134-cards.c struct saa7134_board saa7134_boards[] = { ... [SAA7134_BOARD_PROTEUS_PRO] = { /* /me */ .name = "Proteus Pro [philips reference design]", .audio_clock = 0x00187de7, .tuner_type = TUNER_TNF_5335MF, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x0d, .inputs = {{ .name = name_comp1, .vmux = 3, .amux = LINE2, .gpio = 0x08, },{ .name = name_tv, .vmux = 1, .amux = LINE1, .tv = 1, },{ .name = name_tv_mono, .vmux = 1, .amux = LINE1, .tv = 1, },{ .name = name_svideo, .vmux = 8, .amux = LINE2, .gpio = 0x08, }}, .radio = { .name = name_radio, .amux = LINE1, .gpio = 0x04, }, .mute = { .name = name_mute, .amux = TV, .gpio = 0x08, }, }, int saa7134_board_init1(struct saa7134_dev *dev) { ... case SAA7134_BOARD_PROTEUS_PRO: dev->has_remote = SAA7134_REMOTE_GPIO; break; saa7134-input.c int saa7134_input_init1(struct saa7134_dev *dev) { case SAA7134_BOARD_PROTEUS_PRO: ir_codes = &ir_codes_avermedia_table; mask_keycode = 0x000000; polling = 50; // ms Regards, Darek On 08.01.2010 20:34, hermann pitton wrote: > Hi, > > Am Sonntag, den 03.01.2010, 16:37 +0100 schrieb dz-tor: > >> Hi, >> >> I want to ask whether you are working on this 'issue'. I'm interested in >> the subject, as I'm owner of this card and cannot get this stuff to work >> - I've picture, no sound. Earlier you have written, that you can provide >> patches for testing. If offer is still actual, I can test them. >> Currently I'm using kernel 2.6.31, but if it's a problem I can switch to >> 2.6.32. >> >> As I wrote earlier I have the same card - Winfast TV2100 with FM, tv >> norm used in my country is PAL (I'm from Poland). >> >> Regards, >> Darek >> > please have a look at the xtal/oscillator close to the saa713x chip. > > It can have two different values. See README.saa7134 in Documentation. > > I'll provide a patch with best guessing based on the regspy.exe results > then, assuming all is connected to LINE2 and routed through the external > mux chip as a start. If that fails, we try with LINE1 next. > > Cheers, > Hermann > > > >>> >>>> Hey guys, >>>> >>>> Let me start by thanking you both for all your help. Unfortunately, >>>> there isn't much I can do with the data you provided - it's way too >>>> technical for me. I'd be happy to do any tests and apply any patches, >>>> but I would need some instructions - but only if you have time; I >>>> really don't want to burden you with this. >>>> >>>> Thanks again, >>>> >>>> Pavle. >>>> >>>> >>>> >>>> ________________________________ >>>> From: hermann pitton<hermann-pitton@arcor.de> >>>> To: Terry Wu<terrywu2009@gmail.com> >>>> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com >>>> Sent: Sat, 28 November, 2009 4:09:28 >>>> Subject: Re: Re: Leadtek Winfast TV2100 >>>> >>>> Hi Terry Wu, >>>> >>>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: >>>> >>>>> Hi, >>>>> >>>>> Here are the subsystem IDs for different TV2100 models: >>>>> Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) >>>>> Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) >>>>> Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) >>>>> >>>>> Terry >>>>> >>>> better is to become active on it. >>>> >>>> we can most likely help about how to match such tuners fine, >>>> if any doubts left, but the best is to send just patches with having >>>> such hardware to test on. >>>> >>>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was >>>> pioneering and we have that in mind, it should be fairly easy for those. >>>> >>>> Let's know the other way round too, where you have still concerns doing >>>> so. >>>> >>>> Cheers, >>>> Hermann >>>> >>>> >>>>> 2009/11/23 hermann pitton<hermann-pitton@arcor.de>: >>>>> >>>>>> Hi, thanks again! >>>>>> >>>>>> Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> Please refer to the attached JPEG file for the GPIO >>>>>>> >>>> settings of >>>> >>>>>>> TV2100 with FM (PCB:B). >>>>>>> >>>>>>> Let me know if you need the information of TV2100 without FM >>>>>>> (PCB:A, TVF8533-BDF). >>>>>>> >>>>>>> Terry Wu >>>>>>> >>>>>> On a first look, if we start to count gpios from zero, we tell >>>>>> >>>> the same. >>>> >>>>>> The TVF8533_BDF I would have to look up. It is four to five >>>>>> >>>> years back. >>>> >>>>>> If it uses that minor number TI chip without radio support, we >>>>>> >>>> treat it >>>> >>>>>> as tuner=69 too currently. >>>>>> >>>>>> For all such older can tuners, widely different about the globe, >>>>>> >>>> counts, >>>> >>>>>> that we don't have any way to detect them. So first working, >>>>>> >>>> either NTSC >>>> >>>>>> or PAL, sits in the pool position and others have to think twice. >>>>>> >>>>>> OEMs do code tuners into eeprom content, some do not at all, >>>>>> >>>> such doing >>>> >>>>>> it are in competition and don't follow the rules of the main chip >>>>>> manufacturer, Philips/NXP in that case, and go their own ways. >>>>>> >>>>>> So tuner tables are unstable across manufacturers. >>>>>> >>>>>> We often can't help that much in such cases, but implementing >>>>>> >>>> their own >>>> >>>>>> tuner eeprom detection into the linux drivers is of course still >>>>>> welcome. Hauppauge does it very successfully since years. >>>>>> >>>>>> We can't do much about it, if OEMs don't follow Philips or whom >>>>>> >>>> ever on >>>> >>>>>> such. >>>>>> >>>>>> Thanks, >>>>>> Hermann >>>>>> >>>>>> >>>>>> >>>>>>> 2009/11/23 Terry Wu<terrywu2009@gmail.com>: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> The TVF88T5-BDFF data sheet is attached. >>>>>>>> >>>>>>>> Terry Wu >>>>>>>> >>>>>>>> 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf >>>>>>>> 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf >>>>>>>> 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf >>>>>>>> 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf >>>>>>>> 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf >>>>>>>> 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf >>>>>>>> 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf >>>>>>>> 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf >>>>>>>> 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf >>>>>>>> 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf >>>>>>>> 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf >>>>>>>> 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf >>>>>>>> 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf >>>>>>>> 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf >>>>>>>> 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf >>>>>>>> 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf >>>>>>>> >>>>>>>> >>>>>> >>>>>> >>>>>> >>>> >>>> > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Leadtek Winfast TV2100 2010-01-09 14:46 ` Pavle Predic @ 2010-01-09 16:23 ` dz-tor 2010-01-09 17:14 ` hermann pitton 0 siblings, 1 reply; 20+ messages in thread From: dz-tor @ 2010-01-09 16:23 UTC (permalink / raw) To: Pavle Predic; +Cc: video4linux-list Hi Pavle, On 09.01.2010 15:46, Pavle Predic wrote: > Hey Darek, > > Great job of making the card work. I was really thrilled when I saw > your post. However, I am a total newbie, so I couldn't apply the > changes you wrote about. Could you please be a bit more specific? What > I did is downloaded the driver from here: > http://dl.bytesex.org/releases/video4linux/saa7134-0.2.12.tar.gz and > made the changes to those two files, as described. But I have no clue > how to compile it. I installed linux-headers for my kernel version and > tried to run make, but I'm getting an error. Are there any > configuration options that I need to set in Makefile or Make.config? I'm not sure whether downloading and compiling driver is good idea. v4l drivers (which includes saa7134) are included in mainline kernel, so compiling kernel is what you have to do. From what I know, in Debian there should be package in repositories with kernel sources (linux-source or similar) - this option you should use if you want to stick to the kernel version provided by your distribution. Another option is to download kernel sources from kernel.org and use them (I've done so - I'm using latest stable release). Here you have link to how-to about kernel compiling: https://help.ubuntu.com/6.10/ubuntu/installation-guide/i386/kernel-baking.html. It's for Ubuntu, but for you it should be also applicable (on bottom there is also link to Debian documentation). Before compilation you should make changes which I gave earlier. All files which should be modified are in <kernel_src_path>/drivers/media/video/saa7134/ directory. Have in mind that what I've done is that I've changed existing card configuration - it's not proper solution. When I'll manage remote control to work, I'll try to prepare patch with new card configuration. You can apply my changes now or wait until I'll prepare the patch. Regards, Darek > > Cheers, > > Pavle. > > PS My kernel is 2.6.26-2-686 (it's a Debian Lenny 503 system). Here is > the output produced by make: > > debian:/home/pavle/saa7134-0.2.12# make > make -C /lib/modules/2.6.26-2-686/build > SUBDIRS=/home/pavle/saa7134-0.2.12 modules > make[1]: Entering directory `/usr/src/linux-headers-2.6.26-2-686' > CC [M] /home/pavle/saa7134-0.2.12/video-buf.o > In file included from /home/pavle/saa7134-0.2.12/media/video-buf.h:19, > from /home/pavle/saa7134-0.2.12/video-buf.c:33: > /home/pavle/saa7134-0.2.12/linux/videodev.h:68: error: field > 'class_dev' has incomplete type > /home/pavle/saa7134-0.2.12/linux/videodev.h:87: warning: 'struct > class_device_attribute' declared inside parameter list > /home/pavle/saa7134-0.2.12/linux/videodev.h:87: warning: its scope is > only this definition or declaration, which is probably not what you want > /home/pavle/saa7134-0.2.12/linux/videodev.h: In function > 'video_device_create_file': > /home/pavle/saa7134-0.2.12/linux/videodev.h:89: error: implicit > declaration of function 'class_device_create_file' > /home/pavle/saa7134-0.2.12/linux/videodev.h: At top level: > /home/pavle/saa7134-0.2.12/linux/videodev.h:93: warning: 'struct > class_device_attribute' declared inside parameter list > /home/pavle/saa7134-0.2.12/linux/videodev.h: In function > 'video_device_remove_file': > /home/pavle/saa7134-0.2.12/linux/videodev.h:95: error: implicit > declaration of function 'class_device_remove_file' > /home/pavle/saa7134-0.2.12/video-buf.c: At top level: > /home/pavle/saa7134-0.2.12/video-buf.c:46: error: expected ')' before > string constant > /home/pavle/saa7134-0.2.12/video-buf.c: In function > 'videobuf_vmalloc_to_sg': > /home/pavle/saa7134-0.2.12/video-buf.c:68: error: 'struct scatterlist' > has no member named 'page' > /home/pavle/saa7134-0.2.12/video-buf.c: In function > 'videobuf_pages_to_sg': > /home/pavle/saa7134-0.2.12/video-buf.c:96: error: 'struct scatterlist' > has no member named 'page' > /home/pavle/saa7134-0.2.12/video-buf.c:104: error: 'struct > scatterlist' has no member named 'page' > /home/pavle/saa7134-0.2.12/video-buf.c: In function 'videobuf_vm_nopage': > /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: 'NOPAGE_SIGBUS' > undeclared (first use in this function) > /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: (Each undeclared > identifier is reported only once > /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: for each function > it appears in.) > /home/pavle/saa7134-0.2.12/video-buf.c:1102: error: 'NOPAGE_OOM' > undeclared (first use in this function) > /home/pavle/saa7134-0.2.12/video-buf.c: At top level: > /home/pavle/saa7134-0.2.12/video-buf.c:1119: error: unknown field > 'nopage' specified in initializer > /home/pavle/saa7134-0.2.12/video-buf.c:1119: warning: initialization > from incompatible pointer type > make[2]: *** [/home/pavle/saa7134-0.2.12/video-buf.o] Error 1 > make[1]: *** [_module_/home/pavle/saa7134-0.2.12] Error 2 > make[1]: Leaving directory `/usr/src/linux-headers-2.6.26-2-686' > make: *** [default] Error 2 > > > ------------------------------------------------------------------------ > *From:* dz-tor <dz-tor@wp.pl> > *To:* hermann pitton <hermann-pitton@arcor.de> > *Cc:* terrywu2009@gmail.com; pavle.predic@yahoo.co.uk; > video4linux-list@redhat.com > *Sent:* Fri, 8 January, 2010 23:56:54 > *Subject:* Re: Leadtek Winfast TV2100 > > Hi, > > My friend helped me a little and we managed card to work, i.e. TV > (only mono, I suppose that stereo is not available for this card), > s-video, composite and radio works fine. > > We've tried setting audio_clock to both values (32.11 MHz -> > .audio_clock=0x187de7 and 24.576MHz -> .audio_clock=0x200000) and both > works - for me it seems, that for 32.11 MHz sound is better (i.e. louder). > > Now I have only one problem with ir. We succeeded to enable it, but > reading from it is bit weird - sometimes when I press the key, no > event is generated, sometimes 2 (key pressed/released) and sometimes > more. Have any clue what can cause that? > > Output from dmesg when module is loaded: > [32627.844221] saa7130/34: v4l2 driver version 0.2.15 loaded > [32627.844294] saa7130[0]: found at 0000:01:09.0, rev: 1, irq: 17, > latency: 32, mmio: 0xe7001000 > [32627.844303] saa7130[0]: subsystem: 107d:6f3a, board: Proteus Pro > [philips reference design] [card=1,insmod option] > [32627.844340] saa7130[0]: board init: gpio is 60a08 > [32627.844351] saa7130[0]: gpio: mode=0x0000000 in=0x0060a0c > out=0x0000000 [pre-init] > [32627.844901] input: saa7134 IR (Proteus Pro [philip as > /devices/pci0000:00/0000:00:08.0/0000:01:09.0/input/input15 > [32627.845064] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on > shared IRQs > [32628.028017] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 > 43 a9 1c 55 d2 b2 92 > [32628.028029] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff > ff ff ff ff ff ff ff > [32628.028038] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 > ff 00 8c ff ff ff ff > [32628.028047] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028056] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 > ff ff ff ff ff ff ff > [32628.028064] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028073] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028082] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028091] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028099] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028108] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028117] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028126] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028134] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028143] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028152] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff > [32628.028163] i2c i2c-2: Invalid 7-bit address 0x7a > [32628.036120] tuner 2-0061: chip found @ 0xc2 (saa7130[0]) > [32628.044037] tuner-simple 2-0061: creating new instance > [32628.044044] tuner-simple 2-0061: type set to 69 (Tena TNF 5335 and > similar models) > [32628.052058] saa7130[0]: gpio: mode=0x000000d in=0x0060a00 > out=0x0000008 [mute] > [32628.052178] saa7130[0]: registered device video1 [v4l2] > [32628.052205] saa7130[0]: registered device vbi0 > [32628.052232] saa7130[0]: registered device radio0 > > > For testing we've used existing card (card=1 - Proteus Pro) with tuner > 69. When everything will be working ok, my friend will try to add new > card definition and generate the patch. Below you can find actual code > modified by us: > > saa7134-cards.c > struct saa7134_board saa7134_boards[] = { > ... > [SAA7134_BOARD_PROTEUS_PRO] = { > /* /me */ > .name = "Proteus Pro [philips reference design]", > .audio_clock = 0x00187de7, > .tuner_type = TUNER_TNF_5335MF, > .radio_type = UNSET, > .tuner_addr = ADDR_UNSET, > .radio_addr = ADDR_UNSET, > > .gpiomask = 0x0d, > .inputs = {{ > .name = name_comp1, > .vmux = 3, > .amux = LINE2, > .gpio = 0x08, > },{ > .name = name_tv, > .vmux = 1, > .amux = LINE1, > .tv = 1, > },{ > .name = name_tv_mono, > .vmux = 1, > .amux = LINE1, > .tv = 1, > },{ > .name = name_svideo, > .vmux = 8, > .amux = LINE2, > .gpio = 0x08, > }}, > .radio = { > .name = name_radio, > .amux = LINE1, > .gpio = 0x04, > }, > .mute = { > .name = name_mute, > .amux = TV, > .gpio = 0x08, > }, > }, > > int saa7134_board_init1(struct saa7134_dev *dev) > { > ... > case SAA7134_BOARD_PROTEUS_PRO: > dev->has_remote = SAA7134_REMOTE_GPIO; > break; > > > saa7134-input.c > int saa7134_input_init1(struct saa7134_dev *dev) > { > case SAA7134_BOARD_PROTEUS_PRO: > ir_codes = &ir_codes_avermedia_table; > mask_keycode = 0x000000; > polling = 50; // ms > > Regards, > Darek > > On 08.01.2010 20:34, hermann pitton wrote: > > Hi, > > > > Am Sonntag, den 03.01.2010, 16:37 +0100 schrieb dz-tor: > > > >> Hi, > >> > >> I want to ask whether you are working on this 'issue'. I'm > interested in > >> the subject, as I'm owner of this card and cannot get this stuff to > work > >> - I've picture, no sound. Earlier you have written, that you can > provide > >> patches for testing. If offer is still actual, I can test them. > >> Currently I'm using kernel 2.6.31, but if it's a problem I can > switch to > >> 2.6.32. > >> > >> As I wrote earlier I have the same card - Winfast TV2100 with FM, tv > >> norm used in my country is PAL (I'm from Poland). > >> > >> Regards, > >> Darek > >> > > please have a look at the xtal/oscillator close to the saa713x chip. > > > > It can have two different values. See README.saa7134 in Documentation. > > > > I'll provide a patch with best guessing based on the regspy.exe results > > then, assuming all is connected to LINE2 and routed through the external > > mux chip as a start. If that fails, we try with LINE1 next. > > > > Cheers, > > Hermann > > > > > > > >>> > >>>> Hey guys, > >>>> > >>>> Let me start by thanking you both for all your help. Unfortunately, > >>>> there isn't much I can do with the data you provided - it's way too > >>>> technical for me. I'd be happy to do any tests and apply any patches, > >>>> but I would need some instructions - but only if you have time; I > >>>> really don't want to burden you with this. > >>>> > >>>> Thanks again, > >>>> > >>>> Pavle. > >>>> > >>>> > >>>> > >>>> ________________________________ > >>>> From: hermann pitton<hermann-pitton@arcor.de > <mailto:hermann-pitton@arcor.de>> > >>>> To: Terry Wu<terrywu2009@gmail.com <mailto:terrywu2009@gmail.com>> > >>>> Cc: pavle.predic@yahoo.co.uk <mailto:pavle.predic@yahoo.co.uk>; > video4linux-list@redhat.com <mailto:video4linux-list@redhat.com> > >>>> Sent: Sat, 28 November, 2009 4:09:28 > >>>> Subject: Re: Re: Leadtek Winfast TV2100 > >>>> > >>>> Hi Terry Wu, > >>>> > >>>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: > >>>> > >>>>> Hi, > >>>>> > >>>>> Here are the subsystem IDs for different TV2100 models: > >>>>> Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) > >>>>> Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) > >>>>> Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) > >>>>> > >>>>> Terry > >>>>> > >>>> better is to become active on it. > >>>> > >>>> we can most likely help about how to match such tuners fine, > >>>> if any doubts left, but the best is to send just patches with having > >>>> such hardware to test on. > >>>> > >>>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was > >>>> pioneering and we have that in mind, it should be fairly easy for > those. > >>>> > >>>> Let's know the other way round too, where you have still concerns > doing > >>>> so. > >>>> > >>>> Cheers, > >>>> Hermann > >>>> > >>>> > >>>>> 2009/11/23 hermann pitton<hermann-pitton@arcor.de > <mailto:hermann-pitton@arcor.de>>: > >>>>> > >>>>>> Hi, thanks again! > >>>>>> > >>>>>> Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: > >>>>>> > >>>>>>> Hi, > >>>>>>> > >>>>>>> Please refer to the attached JPEG file for the GPIO > >>>>>>> > >>>> settings of > >>>> > >>>>>>> TV2100 with FM (PCB:B). > >>>>>>> > >>>>>>> Let me know if you need the information of TV2100 without FM > >>>>>>> (PCB:A, TVF8533-BDF). > >>>>>>> > >>>>>>> Terry Wu > >>>>>>> > >>>>>> On a first look, if we start to count gpios from zero, we tell > >>>>>> > >>>> the same. > >>>> > >>>>>> The TVF8533_BDF I would have to look up. It is four to five > >>>>>> > >>>> years back. > >>>> > >>>>>> If it uses that minor number TI chip without radio support, we > >>>>>> > >>>> treat it > >>>> > >>>>>> as tuner=69 too currently. > >>>>>> > >>>>>> For all such older can tuners, widely different about the globe, > >>>>>> > >>>> counts, > >>>> > >>>>>> that we don't have any way to detect them. So first working, > >>>>>> > >>>> either NTSC > >>>> > >>>>>> or PAL, sits in the pool position and others have to think twice. > >>>>>> > >>>>>> OEMs do code tuners into eeprom content, some do not at all, > >>>>>> > >>>> such doing > >>>> > >>>>>> it are in competition and don't follow the rules of the main chip > >>>>>> manufacturer, Philips/NXP in that case, and go their own ways. > >>>>>> > >>>>>> So tuner tables are unstable across manufacturers. > >>>>>> > >>>>>> We often can't help that much in such cases, but implementing > >>>>>> > >>>> their own > >>>> > >>>>>> tuner eeprom detection into the linux drivers is of course still > >>>>>> welcome. Hauppauge does it very successfully since years. > >>>>>> > >>>>>> We can't do much about it, if OEMs don't follow Philips or whom > >>>>>> > >>>> ever on > >>>> > >>>>>> such. > >>>>>> > >>>>>> Thanks, > >>>>>> Hermann > >>>>>> > >>>>>> > >>>>>> > >>>>>>> 2009/11/23 Terry Wu<terrywu2009@gmail.com > <mailto:terrywu2009@gmail.com>>: > >>>>>>> > >>>>>>>> Hi, > >>>>>>>> > >>>>>>>> The TVF88T5-BDFF data sheet is attached. > >>>>>>>> > >>>>>>>> Terry Wu > >>>>>>>> > >>>>>>>> 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > >>>>>>>> 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > >>>>>>>> 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > >>>>>>>> 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > >>>>>>>> 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > >>>>>>>> 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > >>>>>>>> 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > >>>>>>>> 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > >>>>>>>> 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > >>>>>>>> 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > >>>>>>>> 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > >>>>>>>> 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > >>>>>>>> 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > >>>>>>>> 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > >>>>>>>> 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > >>>>>>>> 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > >>>>>>>> > >>>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>> > >>>> > > > > > > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Leadtek Winfast TV2100 2010-01-09 16:23 ` dz-tor @ 2010-01-09 17:14 ` hermann pitton 2010-01-09 22:48 ` hermann pitton 2010-01-10 21:26 ` dz-tor 0 siblings, 2 replies; 20+ messages in thread From: hermann pitton @ 2010-01-09 17:14 UTC (permalink / raw) To: dz-tor; +Cc: Pavle Predic, video4linux-list, LMML, Terry Wu [-- Attachment #1: Type: text/plain, Size: 18603 bytes --] Hi, Am Samstag, den 09.01.2010, 17:23 +0100 schrieb dz-tor: > Hi Pavle, > > On 09.01.2010 15:46, Pavle Predic wrote: > > Hey Darek, > > > > Great job of making the card work. I was really thrilled when I saw > > your post. However, I am a total newbie, so I couldn't apply the > > changes you wrote about. Could you please be a bit more specific? What > > I did is downloaded the driver from here: > > http://dl.bytesex.org/releases/video4linux/saa7134-0.2.12.tar.gz and > > made the changes to those two files, as described. But I have no clue > > how to compile it. I installed linux-headers for my kernel version and > > tried to run make, but I'm getting an error. Are there any > > configuration options that I need to set in Makefile or Make.config? > I'm not sure whether downloading and compiling driver is good idea. v4l > drivers (which includes saa7134) are included in mainline kernel, so > compiling kernel is what you have to do. From what I know, in Debian > there should be package in repositories with kernel sources > (linux-source or similar) - this option you should use if you want to > stick to the kernel version provided by your distribution. Another > option is to download kernel sources from kernel.org and use them (I've > done so - I'm using latest stable release). Here you have link to how-to > about kernel compiling: > https://help.ubuntu.com/6.10/ubuntu/installation-guide/i386/kernel-baking.html. > It's for Ubuntu, but for you it should be also applicable (on bottom > there is also link to Debian documentation). > > Before compilation you should make changes which I gave earlier. All > files which should be modified are in > <kernel_src_path>/drivers/media/video/saa7134/ directory. Have in mind > that what I've done is that I've changed existing card configuration - > it's not proper solution. When I'll manage remote control to work, I'll > try to prepare patch with new card configuration. You can apply my > changes now or wait until I'll prepare the patch. > > Regards, > Darek Great! So Pavle's regspy results and following my instructions did the trick. Patches must go to LMML <linux-media@vger.kernel.org> and be against latest v4l-dvb master at linuxtv.org. You can use what I prepared already yesterday for testing and is attached. You have only to change the clock and use LINE1 for external audio input. I suggest to use also LINE1 for mute then, gpio 0x08 is that input anyway. We can send that modified patch already and add IR support later. You must find the up/down gpio and with mask_keycode = 0x000000 all the other gpios which do change on keypresses and create unique keycodes. Then you either need to add a new keytable or can use an already existing one. Yes, saa7130 chips have only mono TV sound. Cheers, Hermann > > > > > Cheers, > > > > Pavle. > > > > PS My kernel is 2.6.26-2-686 (it's a Debian Lenny 503 system). Here is > > the output produced by make: > > > > debian:/home/pavle/saa7134-0.2.12# make > > make -C /lib/modules/2.6.26-2-686/build > > SUBDIRS=/home/pavle/saa7134-0.2.12 modules > > make[1]: Entering directory `/usr/src/linux-headers-2.6.26-2-686' > > CC [M] /home/pavle/saa7134-0.2.12/video-buf.o > > In file included from /home/pavle/saa7134-0.2.12/media/video-buf.h:19, > > from /home/pavle/saa7134-0.2.12/video-buf.c:33: > > /home/pavle/saa7134-0.2.12/linux/videodev.h:68: error: field > > 'class_dev' has incomplete type > > /home/pavle/saa7134-0.2.12/linux/videodev.h:87: warning: 'struct > > class_device_attribute' declared inside parameter list > > /home/pavle/saa7134-0.2.12/linux/videodev.h:87: warning: its scope is > > only this definition or declaration, which is probably not what you want > > /home/pavle/saa7134-0.2.12/linux/videodev.h: In function > > 'video_device_create_file': > > /home/pavle/saa7134-0.2.12/linux/videodev.h:89: error: implicit > > declaration of function 'class_device_create_file' > > /home/pavle/saa7134-0.2.12/linux/videodev.h: At top level: > > /home/pavle/saa7134-0.2.12/linux/videodev.h:93: warning: 'struct > > class_device_attribute' declared inside parameter list > > /home/pavle/saa7134-0.2.12/linux/videodev.h: In function > > 'video_device_remove_file': > > /home/pavle/saa7134-0.2.12/linux/videodev.h:95: error: implicit > > declaration of function 'class_device_remove_file' > > /home/pavle/saa7134-0.2.12/video-buf.c: At top level: > > /home/pavle/saa7134-0.2.12/video-buf.c:46: error: expected ')' before > > string constant > > /home/pavle/saa7134-0.2.12/video-buf.c: In function > > 'videobuf_vmalloc_to_sg': > > /home/pavle/saa7134-0.2.12/video-buf.c:68: error: 'struct scatterlist' > > has no member named 'page' > > /home/pavle/saa7134-0.2.12/video-buf.c: In function > > 'videobuf_pages_to_sg': > > /home/pavle/saa7134-0.2.12/video-buf.c:96: error: 'struct scatterlist' > > has no member named 'page' > > /home/pavle/saa7134-0.2.12/video-buf.c:104: error: 'struct > > scatterlist' has no member named 'page' > > /home/pavle/saa7134-0.2.12/video-buf.c: In function 'videobuf_vm_nopage': > > /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: 'NOPAGE_SIGBUS' > > undeclared (first use in this function) > > /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: (Each undeclared > > identifier is reported only once > > /home/pavle/saa7134-0.2.12/video-buf.c:1099: error: for each function > > it appears in.) > > /home/pavle/saa7134-0.2.12/video-buf.c:1102: error: 'NOPAGE_OOM' > > undeclared (first use in this function) > > /home/pavle/saa7134-0.2.12/video-buf.c: At top level: > > /home/pavle/saa7134-0.2.12/video-buf.c:1119: error: unknown field > > 'nopage' specified in initializer > > /home/pavle/saa7134-0.2.12/video-buf.c:1119: warning: initialization > > from incompatible pointer type > > make[2]: *** [/home/pavle/saa7134-0.2.12/video-buf.o] Error 1 > > make[1]: *** [_module_/home/pavle/saa7134-0.2.12] Error 2 > > make[1]: Leaving directory `/usr/src/linux-headers-2.6.26-2-686' > > make: *** [default] Error 2 > > > > > > ------------------------------------------------------------------------ > > *From:* dz-tor <dz-tor@wp.pl> > > *To:* hermann pitton <hermann-pitton@arcor.de> > > *Cc:* terrywu2009@gmail.com; pavle.predic@yahoo.co.uk; > > video4linux-list@redhat.com > > *Sent:* Fri, 8 January, 2010 23:56:54 > > *Subject:* Re: Leadtek Winfast TV2100 > > > > Hi, > > > > My friend helped me a little and we managed card to work, i.e. TV > > (only mono, I suppose that stereo is not available for this card), > > s-video, composite and radio works fine. > > > > We've tried setting audio_clock to both values (32.11 MHz -> > > .audio_clock=0x187de7 and 24.576MHz -> .audio_clock=0x200000) and both > > works - for me it seems, that for 32.11 MHz sound is better (i.e. louder). > > > > Now I have only one problem with ir. We succeeded to enable it, but > > reading from it is bit weird - sometimes when I press the key, no > > event is generated, sometimes 2 (key pressed/released) and sometimes > > more. Have any clue what can cause that? > > > > Output from dmesg when module is loaded: > > [32627.844221] saa7130/34: v4l2 driver version 0.2.15 loaded > > [32627.844294] saa7130[0]: found at 0000:01:09.0, rev: 1, irq: 17, > > latency: 32, mmio: 0xe7001000 > > [32627.844303] saa7130[0]: subsystem: 107d:6f3a, board: Proteus Pro > > [philips reference design] [card=1,insmod option] > > [32627.844340] saa7130[0]: board init: gpio is 60a08 > > [32627.844351] saa7130[0]: gpio: mode=0x0000000 in=0x0060a0c > > out=0x0000000 [pre-init] > > [32627.844901] input: saa7134 IR (Proteus Pro [philip as > > /devices/pci0000:00/0000:00:08.0/0000:01:09.0/input/input15 > > [32627.845064] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on > > shared IRQs > > [32628.028017] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 > > 43 a9 1c 55 d2 b2 92 > > [32628.028029] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff > > ff ff ff ff ff ff ff > > [32628.028038] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 > > ff 00 8c ff ff ff ff > > [32628.028047] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028056] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 > > ff ff ff ff ff ff ff > > [32628.028064] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028073] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028082] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028091] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028099] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028108] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028117] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028126] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028134] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028143] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028152] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff > > [32628.028163] i2c i2c-2: Invalid 7-bit address 0x7a > > [32628.036120] tuner 2-0061: chip found @ 0xc2 (saa7130[0]) > > [32628.044037] tuner-simple 2-0061: creating new instance > > [32628.044044] tuner-simple 2-0061: type set to 69 (Tena TNF 5335 and > > similar models) > > [32628.052058] saa7130[0]: gpio: mode=0x000000d in=0x0060a00 > > out=0x0000008 [mute] > > [32628.052178] saa7130[0]: registered device video1 [v4l2] > > [32628.052205] saa7130[0]: registered device vbi0 > > [32628.052232] saa7130[0]: registered device radio0 > > > > > > For testing we've used existing card (card=1 - Proteus Pro) with tuner > > 69. When everything will be working ok, my friend will try to add new > > card definition and generate the patch. Below you can find actual code > > modified by us: > > > > saa7134-cards.c > > struct saa7134_board saa7134_boards[] = { > > ... > > [SAA7134_BOARD_PROTEUS_PRO] = { > > /* /me */ > > .name = "Proteus Pro [philips reference design]", > > .audio_clock = 0x00187de7, > > .tuner_type = TUNER_TNF_5335MF, > > .radio_type = UNSET, > > .tuner_addr = ADDR_UNSET, > > .radio_addr = ADDR_UNSET, > > > > .gpiomask = 0x0d, > > .inputs = {{ > > .name = name_comp1, > > .vmux = 3, > > .amux = LINE2, > > .gpio = 0x08, > > },{ > > .name = name_tv, > > .vmux = 1, > > .amux = LINE1, > > .tv = 1, > > },{ > > .name = name_tv_mono, > > .vmux = 1, > > .amux = LINE1, > > .tv = 1, > > },{ > > .name = name_svideo, > > .vmux = 8, > > .amux = LINE2, > > .gpio = 0x08, > > }}, > > .radio = { > > .name = name_radio, > > .amux = LINE1, > > .gpio = 0x04, > > }, > > .mute = { > > .name = name_mute, > > .amux = TV, > > .gpio = 0x08, > > }, > > }, > > > > int saa7134_board_init1(struct saa7134_dev *dev) > > { > > ... > > case SAA7134_BOARD_PROTEUS_PRO: > > dev->has_remote = SAA7134_REMOTE_GPIO; > > break; > > > > > > saa7134-input.c > > int saa7134_input_init1(struct saa7134_dev *dev) > > { > > case SAA7134_BOARD_PROTEUS_PRO: > > ir_codes = &ir_codes_avermedia_table; > > mask_keycode = 0x000000; > > polling = 50; // ms > > > > Regards, > > Darek > > > > On 08.01.2010 20:34, hermann pitton wrote: > > > Hi, > > > > > > Am Sonntag, den 03.01.2010, 16:37 +0100 schrieb dz-tor: > > > > > >> Hi, > > >> > > >> I want to ask whether you are working on this 'issue'. I'm > > interested in > > >> the subject, as I'm owner of this card and cannot get this stuff to > > work > > >> - I've picture, no sound. Earlier you have written, that you can > > provide > > >> patches for testing. If offer is still actual, I can test them. > > >> Currently I'm using kernel 2.6.31, but if it's a problem I can > > switch to > > >> 2.6.32. > > >> > > >> As I wrote earlier I have the same card - Winfast TV2100 with FM, tv > > >> norm used in my country is PAL (I'm from Poland). > > >> > > >> Regards, > > >> Darek > > >> > > > please have a look at the xtal/oscillator close to the saa713x chip. > > > > > > It can have two different values. See README.saa7134 in Documentation. > > > > > > I'll provide a patch with best guessing based on the regspy.exe results > > > then, assuming all is connected to LINE2 and routed through the external > > > mux chip as a start. If that fails, we try with LINE1 next. > > > > > > Cheers, > > > Hermann > > > > > > > > > > > >>> > > >>>> Hey guys, > > >>>> > > >>>> Let me start by thanking you both for all your help. Unfortunately, > > >>>> there isn't much I can do with the data you provided - it's way too > > >>>> technical for me. I'd be happy to do any tests and apply any patches, > > >>>> but I would need some instructions - but only if you have time; I > > >>>> really don't want to burden you with this. > > >>>> > > >>>> Thanks again, > > >>>> > > >>>> Pavle. > > >>>> > > >>>> > > >>>> > > >>>> ________________________________ > > >>>> From: hermann pitton<hermann-pitton@arcor.de > > <mailto:hermann-pitton@arcor.de>> > > >>>> To: Terry Wu<terrywu2009@gmail.com <mailto:terrywu2009@gmail.com>> > > >>>> Cc: pavle.predic@yahoo.co.uk <mailto:pavle.predic@yahoo.co.uk>; > > video4linux-list@redhat.com <mailto:video4linux-list@redhat.com> > > >>>> Sent: Sat, 28 November, 2009 4:09:28 > > >>>> Subject: Re: Re: Leadtek Winfast TV2100 > > >>>> > > >>>> Hi Terry Wu, > > >>>> > > >>>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: > > >>>> > > >>>>> Hi, > > >>>>> > > >>>>> Here are the subsystem IDs for different TV2100 models: > > >>>>> Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) > > >>>>> Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) > > >>>>> Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) > > >>>>> > > >>>>> Terry > > >>>>> > > >>>> better is to become active on it. > > >>>> > > >>>> we can most likely help about how to match such tuners fine, > > >>>> if any doubts left, but the best is to send just patches with having > > >>>> such hardware to test on. > > >>>> > > >>>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was > > >>>> pioneering and we have that in mind, it should be fairly easy for > > those. > > >>>> > > >>>> Let's know the other way round too, where you have still concerns > > doing > > >>>> so. > > >>>> > > >>>> Cheers, > > >>>> Hermann > > >>>> > > >>>> > > >>>>> 2009/11/23 hermann pitton<hermann-pitton@arcor.de > > <mailto:hermann-pitton@arcor.de>>: > > >>>>> > > >>>>>> Hi, thanks again! > > >>>>>> > > >>>>>> Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: > > >>>>>> > > >>>>>>> Hi, > > >>>>>>> > > >>>>>>> Please refer to the attached JPEG file for the GPIO > > >>>>>>> > > >>>> settings of > > >>>> > > >>>>>>> TV2100 with FM (PCB:B). > > >>>>>>> > > >>>>>>> Let me know if you need the information of TV2100 without FM > > >>>>>>> (PCB:A, TVF8533-BDF). > > >>>>>>> > > >>>>>>> Terry Wu > > >>>>>>> > > >>>>>> On a first look, if we start to count gpios from zero, we tell > > >>>>>> > > >>>> the same. > > >>>> > > >>>>>> The TVF8533_BDF I would have to look up. It is four to five > > >>>>>> > > >>>> years back. > > >>>> > > >>>>>> If it uses that minor number TI chip without radio support, we > > >>>>>> > > >>>> treat it > > >>>> > > >>>>>> as tuner=69 too currently. > > >>>>>> > > >>>>>> For all such older can tuners, widely different about the globe, > > >>>>>> > > >>>> counts, > > >>>> > > >>>>>> that we don't have any way to detect them. So first working, > > >>>>>> > > >>>> either NTSC > > >>>> > > >>>>>> or PAL, sits in the pool position and others have to think twice. > > >>>>>> > > >>>>>> OEMs do code tuners into eeprom content, some do not at all, > > >>>>>> > > >>>> such doing > > >>>> > > >>>>>> it are in competition and don't follow the rules of the main chip > > >>>>>> manufacturer, Philips/NXP in that case, and go their own ways. > > >>>>>> > > >>>>>> So tuner tables are unstable across manufacturers. > > >>>>>> > > >>>>>> We often can't help that much in such cases, but implementing > > >>>>>> > > >>>> their own > > >>>> > > >>>>>> tuner eeprom detection into the linux drivers is of course still > > >>>>>> welcome. Hauppauge does it very successfully since years. > > >>>>>> > > >>>>>> We can't do much about it, if OEMs don't follow Philips or whom > > >>>>>> > > >>>> ever on > > >>>> > > >>>>>> such. > > >>>>>> > > >>>>>> Thanks, > > >>>>>> Hermann > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>>> 2009/11/23 Terry Wu<terrywu2009@gmail.com > > <mailto:terrywu2009@gmail.com>>: > > >>>>>>> > > >>>>>>>> Hi, > > >>>>>>>> > > >>>>>>>> The TVF88T5-BDFF data sheet is attached. > > >>>>>>>> > > >>>>>>>> Terry Wu > > >>>>>>>> > > >>>>>>>> 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > > >>>>>>>> 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > > >>>>>>>> 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > > >>>>>>>> 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > > >>>>>>>> 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > > >>>>>>>> 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > > >>>>>>>> 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > > >>>>>>>> 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > > >>>>>>>> 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > > >>>>>>>> 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > > >>>>>>>> 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > > >>>>>>>> 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > > >>>>>>>> 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > > >>>>>>>> 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > > >>>>>>>> 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > > >>>>>>>> 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > > >>>>>>>> > > >>>>>>>> [-- Attachment #2: saa7134_testing_support_for_Leadtek_2100FM.patch --] [-- Type: text/x-patch, Size: 2164 bytes --] diff -r b6b82258cf5e linux/drivers/media/video/saa7134/saa7134-cards.c --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Dec 31 19:14:54 2009 -0200 +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Jan 08 21:48:53 2010 +0100 @@ -5359,7 +5359,47 @@ .vmux = 8, } }, }, - + [SAA7134_BOARD_LEADTEK_WINFAST_TV2100FM] = { + .name = "Leadtek Winfast 2100FM", + .audio_clock = 0x00200000, + .tuner_type = TUNER_TNF_5335MF, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0xe0d, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .gpio = 0x00, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + .gpio = 0x08, + }, { + .name = name_comp2, + .vmux = 3, + .amux = LINE2, + .gpio = 0x08, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + .gpio = 0x08, + } }, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x04, + }, + .mute = { + .name = name_mute, + .amux = LINE2, + .gpio = 0x08, + }, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -6510,6 +6550,12 @@ .subdevice = 0x6655, .driver_data = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S, }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x107d, + .subdevice = 0x6f3a, + .driver_data = SAA7134_BOARD_LEADTEK_WINFAST_TV2100FM, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, diff -r b6b82258cf5e linux/drivers/media/video/saa7134/saa7134.h --- a/linux/drivers/media/video/saa7134/saa7134.h Thu Dec 31 19:14:54 2009 -0200 +++ b/linux/drivers/media/video/saa7134/saa7134.h Fri Jan 08 21:48:53 2010 +0100 @@ -300,6 +300,7 @@ #define SAA7134_BOARD_ZOLID_HYBRID_PCI 173 #define SAA7134_BOARD_ASUS_EUROPA_HYBRID 174 #define SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S 175 +#define SAA7134_BOARD_LEADTEK_WINFAST_TV2100FM 176 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Leadtek Winfast TV2100 2010-01-09 17:14 ` hermann pitton @ 2010-01-09 22:48 ` hermann pitton 2010-01-10 21:26 ` dz-tor 1 sibling, 0 replies; 20+ messages in thread From: hermann pitton @ 2010-01-09 22:48 UTC (permalink / raw) To: dz-tor; +Cc: Pavle Predic, video4linux-list, LMML, Terry Wu Hi, sorry, there is a typo in the gpio mask on previously attached patch you might use against current v4l-dvb with your further findings. Mask 0x0d is sufficient and we don't need any 0xe0d :( You might also consider to start with vmux = 3 for Composite1 and vmux = 0 for Composite2, that is expected to be over the S-Video connector and should work too. Does save some plugging around with two composite input devices, if S-Video is not in use. good night, Hermann ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Leadtek Winfast TV2100 2010-01-09 17:14 ` hermann pitton 2010-01-09 22:48 ` hermann pitton @ 2010-01-10 21:26 ` dz-tor 1 sibling, 0 replies; 20+ messages in thread From: dz-tor @ 2010-01-10 21:26 UTC (permalink / raw) To: hermann pitton; +Cc: Pavle Predic, video4linux-list, LMML, Terry Wu Hi, On 09.01.2010 18:14, hermann pitton wrote: > Hi, > > Am Samstag, den 09.01.2010, 17:23 +0100 schrieb dz-tor: > >> Hi Pavle, >> >> On 09.01.2010 15:46, Pavle Predic wrote: >> >>> Hey Darek, >>> >>> Great job of making the card work. I was really thrilled when I saw >>> your post. However, I am a total newbie, so I couldn't apply the >>> changes you wrote about. Could you please be a bit more specific? What >>> I did is downloaded the driver from here: >>> http://dl.bytesex.org/releases/video4linux/saa7134-0.2.12.tar.gz and >>> made the changes to those two files, as described. But I have no clue >>> how to compile it. I installed linux-headers for my kernel version and >>> tried to run make, but I'm getting an error. Are there any >>> configuration options that I need to set in Makefile or Make.config? >>> >> I'm not sure whether downloading and compiling driver is good idea. v4l >> drivers (which includes saa7134) are included in mainline kernel, so >> compiling kernel is what you have to do. From what I know, in Debian >> there should be package in repositories with kernel sources >> (linux-source or similar) - this option you should use if you want to >> stick to the kernel version provided by your distribution. Another >> option is to download kernel sources from kernel.org and use them (I've >> done so - I'm using latest stable release). Here you have link to how-to >> about kernel compiling: >> https://help.ubuntu.com/6.10/ubuntu/installation-guide/i386/kernel-baking.html. >> It's for Ubuntu, but for you it should be also applicable (on bottom >> there is also link to Debian documentation). >> >> Before compilation you should make changes which I gave earlier. All >> files which should be modified are in >> <kernel_src_path>/drivers/media/video/saa7134/ directory. Have in mind >> that what I've done is that I've changed existing card configuration - >> it's not proper solution. When I'll manage remote control to work, I'll >> try to prepare patch with new card configuration. You can apply my >> changes now or wait until I'll prepare the patch. >> >> Regards, >> Darek >> > Great! > > So Pavle's regspy results and following my instructions did the trick. > > Patches must go to LMML<linux-media@vger.kernel.org> and be against > latest v4l-dvb master at linuxtv.org. > Done > You can use what I prepared already yesterday for testing and is > attached. You have only to change the clock and use LINE1 for external > audio input. I suggest to use also LINE1 for mute then, gpio 0x08 is > that input anyway. > > We can send that modified patch already and add IR support later. > > You must find the up/down gpio and with mask_keycode = 0x000000 > all the other gpios which do change on keypresses and create unique > keycodes. Then you either need to add a new keytable or can use an > already existing one. > I understand what have to be done to get support for remote control - problem lays somewhere else. Later I'll send more details with code and outputs from dmesg and description of the problem. Regards, Darek ^ permalink raw reply [flat|nested] 20+ messages in thread
* Aw: Re: Leadtek Winfast TV2100 @ 2009-11-21 22:33 hermann-pitton 2009-11-22 12:51 ` Terry Wu 0 siblings, 1 reply; 20+ messages in thread From: hermann-pitton @ 2009-11-21 22:33 UTC (permalink / raw) To: pavle.predic, terrywu2009, hermann-pitton; +Cc: video4linux-list Hi, sorry, posting from a webmail interface. Might get bounced from the list. ----- Original Nachricht ---- Von: Pavle Predic <pavle.predic@yahoo.co.uk> An: Terry Wu <terrywu2009@gmail.com>, hermann pitton <hermann-pitton@arcor.de> Datum: 21.11.2009 20:53 Betreff: Re: Leadtek Winfast TV2100 > Hey Terry, > > Thanks for your input. Yes it would seem that my tuner is not supported > (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was > hoping that an existing board/tuner combination might do the job. > > @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get > sound. Interestingly enough, almost all card ids produce a picture with this > tuner. Also, I noticed that with some board IDs I'm getting clicks when > muting/unmuting or switching channels, but no broadcast sound > whatsoever...:( Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL. I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies. > I also tried running regspy.exe (after booting to Windows) and performed the > test as described on dscaler site. But the results are way to cryptic for > me...I have no clue how to use this. So I'll paste it here, and maybe > someone will be able to draw a conclusion: > Ah, good. > SAA7130 Card [0]: > > Vendor ID: 0x1131 > Device ID: 0x7130 > Subsystem ID: 0x6f3a107d > > > 7 states dumped > > ---------------------------------------------------------------------------- > ------ > > SAA7130 Card - State 0: > SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 > 00001001) > SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 > 00001100) > SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > > SAA7134_ANALOG_IO_SELECT: 3b * (00111011) > > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > > Changes: State 0 -> State 1: > SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- > -------- -----0--) > SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- > -------- ----11--) > SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11) > > > 3 changes > > > ---------------------------------------------------------------------------- > ------ > > SAA7130 Card - State 1: > SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > 00001101) (was: 80000009) > SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 > 00000000) (was: 0606200c) > SAA7134_ANALOG_IN_CTRL1: c1 * (11000001) > > SAA7134_ANALOG_IO_SELECT: 00 * (00000000) > (was: 3b) > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > > Changes: State 1 -> State 2: > SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- > -------- ----0---) > SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-) > > SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0) > > > 3 changes > > > ---------------------------------------------------------------------------- > ------ > > SAA7130 Card - State 2: > SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > 00001101) > SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 > 00001000) (was: 00062000) > SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) > (was: c1) > SAA7134_ANALOG_IO_SELECT: 09 (00001001) > (was: 00) > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > > Changes: State 2 -> State 3: > SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11) > > > 1 changes > > > ---------------------------------------------------------------------------- > ------ > > SAA7130 Card - State 3: > SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > 00001101) > SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 > 00001000) > SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) > (was: 83) > SAA7134_ANALOG_IO_SELECT: 09 * (00001001) > > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > > Changes: State 3 -> State 4: > SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- > -------- ----10--) > SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) > (same as 0, 1) > SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) > (same as 1) > > 3 changes > > > ---------------------------------------------------------------------------- > ------ > > SAA7130 Card - State 4: > SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > 00001101) > SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 > 00000100) (was: 00062008) > SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > (was: c8) > SAA7134_ANALOG_IO_SELECT: 00 (00000000) > (was: 09) > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > > Changes: State 4 -> State 5: > SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- > -------- -----1--) > > 1 changes > > > ---------------------------------------------------------------------------- > ------ > > SAA7130 Card - State 5: > SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > 00001101) > SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 > 00000000) (was: 04062004) > SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > > SAA7134_ANALOG_IO_SELECT: 00 * (00000000) > > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > > Changes: State 5 -> Register Dump: > SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- > -------- ----0---) > SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-) > > > 2 changes > > > ============================================================================ > ===== > > SAA7130 Card - Register Dump: > SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > 00001101) > SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 > 00001000) (was: 02062000) > SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > > SAA7134_ANALOG_IO_SELECT: 02 (00000010) > (was: 00) > SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > 00000000) > SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > > SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > > SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > > SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > > SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > > SAA7134_TS_PARALLEL: 04 (00000100) > > SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > > SAA7134_TS_SERIAL0: 00 (00000000) > > SAA7134_TS_SERIAL1: 00 (00000000) > > SAA7134_TS_DMA0: 00 (00000000) > > SAA7134_TS_DMA1: 00 (00000000) > > SAA7134_TS_DMA2: 00 (00000000) > > SAA7134_SPECIAL_MODE: 01 (00000001) > > > end of dump > > Here is the order in which I performed the test:State 6 > State 0 - viewing software off > State 1 - tuner mode > State 2 - composite mode > State 3 - s video mode > State 4 - radio mode > State 5 - tuner mode (again) > Final dump - viewing software off (again) > > Thanks to everyone for your help. > > Pavle. > Better don't top post. Becomes hard to read after a while. You would try wsith a gpio_mask = 0x0d. .gpio for TV is 0x00000000 (default, don't even need to set it). For s-video and composite 0x08. For radio 0x04. On saa7130 chips mono audio from tuner in most cases is connected to LINE2. Then also radio is on LINE2 and s-video and composite on LINE1. For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08. Maybe Terry knows better. Good luck for testing. Cheers, Hermann > > ________________________________ > From: Terry Wu <terrywu2009@gmail.com> > To: hermann pitton <hermann-pitton@arcor.de> > Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com > Sent: Sat, 21 November, 2009 10:07:05 > Subject: Re: Leadtek Winfast TV2100 > > Hi, > > There are many models of TV2100. > Different model uses different TV tuner. > > The tuner 69 is TUNER_TNF_5335MF. > Make sure the tuner in your TV2100 card is the TNF_5335MF. > > Maybe the tuner in your TV2100 card is not supported by current > v4l-dvb driver yet (linux\include\media\tuner.h). > > > Terry > > 2009/11/21 hermann pitton <hermann-pitton@arcor.de>: > > Hi Pavle, > > > > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic: > >> Hi Hermann, > >> > >> Thank you so much for your help. I didn't really get most of what you > >> said (way to technical for me), but at least I know now which tuner I > >> should use, so I'll keep testing with tuner 69 and see if I get > >> results. > > > > that one should be right, especially for analog radio. > > > >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card > >> work for my cable tv which uses PAL BG (at least so they say). > > > > Lots of people are on the move these days, therefore it is important to > > know too, what they might carry with them. That tuner should be fine > > then. > > > >> I'll report back after testing on tuner 69 (I'll simply try all card > >> ids with this tuner id). In the meantime here's some more info: > > > > Better is to follow the advice how you can narrow down such stuff. > > > > As far I know, we have not destroyed a single device yet on the saa7134 > > driver, but to go over all possibilities, concerning voltage and gpios, > > has some risks and is not the shortest way to come closer. > > > > Thanks for your input. > > > > Cheers, > > Hermann > > > >> dmesg: > >> > >> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded > >> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low) > >> -> IRQ 17 > >> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17, > >> latency: 64, mmio: 0xfdffe000 > >> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board: > >> UNKNOWN/GENERIC [card=0,autodetected] > >> [ 9.829458] saa7130[0]: board init: gpio is 6200c > >> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on > >> shared IRQs > >> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 > >> 43 a9 1c 55 d2 b2 92 > >> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 > >> ff 00 8c ff ff ff ff > >> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 > >> ff ff ff ff ff ff ff > >> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 9.980876] saa7130[0]: registered device video0 [v4l2] > >> [ 9.980908] saa7130[0]: registered device vbi0 > >> > >> > >> lsmod: > >> > >> saa7134 135552 0 > >> ir_common 47172 1 saa7134 > >> v4l2_common 14308 1 saa7134 > >> videodev 31040 2 saa7134,v4l2_common > >> videobuf_dma_sg 11340 1 saa7134 > >> videobuf_core 16164 2 saa7134,videobuf_dma_sg > >> tveeprom 10720 1 saa7134 > >> i2c_core 20844 4 > >> i2c_viapro,saa7134,v4l2_common,tveeprom > >> > >> lspci: > >> > >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 > >> Video Broadcast Decoder [1131:7130] (rev 01) > >> Subsystem: LeadTek Research Inc. Device [107d:6f3a] > >> Flags: bus master, medium devsel, latency 64, IRQ 17 > >> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] > >> Capabilities: [40] Power Management version 1 > >> Kernel driver in use: saa7134 > >> Kernel modules: saa7134 > >> > >> Thanks again, > >> > >> Pavle. > >> > >> > >> > >> > >> > >> ______________________________________________________________________ > >> From: hermann pitton <hermann-pitton@arcor.de> > >> To: Pavle Predic <pavle.predic@yahoo.co.uk> > >> Cc: video4linux-list@redhat.com > >> Sent: Sun, 8 November, 2009 23:35:08 > >> Subject: Re: Leadtek Winfast TV2100 > >> > >> Hi Pavle, > >> > >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic: > >> > Did anyone manage to get this card working on Linux? I got the > >> picture out of the box, but it's impossible to get any sound from the > >> damned thing. The card is not on CARDLIST.saa7134, but I assume a > >> similar card/tuner combination can be used. But which? By the way, I > >> got the speakers connected directly to card output, I'm not even > >> trying to get it working with my sound card. I can hear clicks when > >> loading/unloading modules, so it's alive but not set up properly. > >> > > >> > Any info would be greatly appreciated. Perhaps someone knows of > >> another card that is similar to this one? > >> > > >> > Card info: > >> > Chipset: saa7134 > >> > Tuner: Tvision TVF88T5-B/DFF > >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7, > >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68 > >> > >> that is not enough information yet. > >> > >> The correct tuner for this one is tuner=69. > >> > >> Only with this one you will have also radio support. > >> > >> Since you mail from an UK mail provider, this tuner is not expected to > >> work with PAL-I TV stereo sound there, but radio would work. > >> > >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for > >> TV > >> sound are only found on saa7130 chips, except there is also an extra > >> TV > >> mono section directly from the tuner) work for TV sound, most often > >> an > >> external audio mux is in the way and needs to be configured correctly > >> with saa7134 gpio pins. Looking also at the minor chips on the card > >> with > >> more than 3 pins can reveal such a mux. > >> > >> There is also a software test on such hardware, succeeding in most > >> cases. > >> > >> By default, external analog audio input is looped through to analog > >> audio out, on which you are listening, if the driver is unloaded. > >> > >> On a saa7134 chip, on saa7130 are some known specials, you should hear > >> the incoming sound directly on your headphones or what else you might > >> be > >> using directly connected to your card, trying on LINE1 and LINE2 for > >> that. > >> > >> If not, you can expect that such a mux chip needs to be treated > >> correctly. > >> > >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify > >> such gpios in use, else you must trace lines and resistors on it. > >> > >> In general, an absolute minimum is to provide related "dmesg" after > >> loading the driver _without_ having tried on other cards previously. > >> > >> Please read more on the linuxtv.org wiki about adding support for a > >> new > >> card. > >> > >> Cheers, > >> Hermann > > > > Jetzt NEU: Do it youself E-Cards bei Arcor.de! Stellen Sie Ihr eigenes Unikat zusammen und machen Sie dem Empfänger eine ganz persönliche Freude! E-Card Marke Eigenbau: HIER KLICKEN: http://www.arcor.de/rd/footer.ecard -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-21 22:33 Aw: " hermann-pitton @ 2009-11-22 12:51 ` Terry Wu 2009-11-22 22:30 ` hermann pitton 0 siblings, 1 reply; 20+ messages in thread From: Terry Wu @ 2009-11-22 12:51 UTC (permalink / raw) To: hermann-pitton; +Cc: video4linux-list Hi, I will give you the tuner data sheet and schematic of GPIO tomorrow. Stay tuned. Terry 2009/11/22 <hermann-pitton@arcor.de>: > Hi, > > sorry, posting from a webmail interface. > > Might get bounced from the list. > > ----- Original Nachricht ---- > Von: Pavle Predic <pavle.predic@yahoo.co.uk> > An: Terry Wu <terrywu2009@gmail.com>, hermann pitton <hermann-pitton@arcor.de> > Datum: 21.11.2009 20:53 > Betreff: Re: Leadtek Winfast TV2100 > >> Hey Terry, >> >> Thanks for your input. Yes it would seem that my tuner is not supported >> (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was >> hoping that an existing board/tuner combination might do the job. >> >> @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get >> sound. Interestingly enough, almost all card ids produce a picture with this >> tuner. Also, I noticed that with some board IDs I'm getting clicks when >> muting/unmuting or switching channels, but no broadcast sound >> whatsoever...:( > > Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL. > I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies. > >> I also tried running regspy.exe (after booting to Windows) and performed the >> test as described on dscaler site. But the results are way to cryptic for >> me...I have no clue how to use this. So I'll paste it here, and maybe >> someone will be able to draw a conclusion: >> > Ah, good. > >> SAA7130 Card [0]: >> >> Vendor ID: 0x1131 >> Device ID: 0x7130 >> Subsystem ID: 0x6f3a107d >> >> >> 7 states dumped >> >> ---------------------------------------------------------------------------- >> ------ >> >> SAA7130 Card - State 0: >> SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 >> 00001001) >> SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 >> 00001100) >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> SAA7134_ANALOG_IO_SELECT: 3b * (00111011) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> Changes: State 0 -> State 1: >> SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- >> -------- -----0--) >> SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- >> -------- ----11--) >> SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11) >> >> >> 3 changes >> >> >> ---------------------------------------------------------------------------- >> ------ >> >> SAA7130 Card - State 1: >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> 00001101) (was: 80000009) >> SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 >> 00000000) (was: 0606200c) >> SAA7134_ANALOG_IN_CTRL1: c1 * (11000001) >> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) >> (was: 3b) >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> Changes: State 1 -> State 2: >> SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- >> -------- ----0---) >> SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-) >> >> SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0) >> >> >> 3 changes >> >> >> ---------------------------------------------------------------------------- >> ------ >> >> SAA7130 Card - State 2: >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> 00001101) >> SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 >> 00001000) (was: 00062000) >> SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) >> (was: c1) >> SAA7134_ANALOG_IO_SELECT: 09 (00001001) >> (was: 00) >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> Changes: State 2 -> State 3: >> SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11) >> >> >> 1 changes >> >> >> ---------------------------------------------------------------------------- >> ------ >> >> SAA7130 Card - State 3: >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> 00001101) >> SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 >> 00001000) >> SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) >> (was: 83) >> SAA7134_ANALOG_IO_SELECT: 09 * (00001001) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> Changes: State 3 -> State 4: >> SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- >> -------- ----10--) >> SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) >> (same as 0, 1) >> SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) >> (same as 1) >> >> 3 changes >> >> >> ---------------------------------------------------------------------------- >> ------ >> >> SAA7130 Card - State 4: >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> 00001101) >> SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 >> 00000100) (was: 00062008) >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> (was: c8) >> SAA7134_ANALOG_IO_SELECT: 00 (00000000) >> (was: 09) >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> Changes: State 4 -> State 5: >> SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- >> -------- -----1--) >> >> 1 changes >> >> >> ---------------------------------------------------------------------------- >> ------ >> >> SAA7130 Card - State 5: >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> 00001101) >> SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 >> 00000000) (was: 04062004) >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> Changes: State 5 -> Register Dump: >> SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- >> -------- ----0---) >> SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-) >> >> >> 2 changes >> >> >> ============================================================================ >> ===== >> >> SAA7130 Card - Register Dump: >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> 00001101) >> SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 >> 00001000) (was: 02062000) >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> SAA7134_ANALOG_IO_SELECT: 02 (00000010) >> (was: 00) >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> 00000000) >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> end of dump >> >> Here is the order in which I performed the test:State 6 >> State 0 - viewing software off >> State 1 - tuner mode >> State 2 - composite mode >> State 3 - s video mode >> State 4 - radio mode >> State 5 - tuner mode (again) >> Final dump - viewing software off (again) >> >> Thanks to everyone for your help. >> >> Pavle. >> > > Better don't top post. Becomes hard to read after a while. > > You would try wsith a gpio_mask = 0x0d. > > .gpio for TV is 0x00000000 (default, don't even need to set it). > > For s-video and composite 0x08. > > For radio 0x04. > > On saa7130 chips mono audio from tuner in most cases is connected to LINE2. > > Then also radio is on LINE2 and s-video and composite on LINE1. > > For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08. > > Maybe Terry knows better. > > Good luck for testing. > > Cheers, > Hermann > >> >> ________________________________ >> From: Terry Wu <terrywu2009@gmail.com> >> To: hermann pitton <hermann-pitton@arcor.de> >> Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com >> Sent: Sat, 21 November, 2009 10:07:05 >> Subject: Re: Leadtek Winfast TV2100 >> >> Hi, >> >> There are many models of TV2100. >> Different model uses different TV tuner. >> >> The tuner 69 is TUNER_TNF_5335MF. >> Make sure the tuner in your TV2100 card is the TNF_5335MF. >> >> Maybe the tuner in your TV2100 card is not supported by current >> v4l-dvb driver yet (linux\include\media\tuner.h). >> >> >> Terry >> >> 2009/11/21 hermann pitton <hermann-pitton@arcor.de>: >> > Hi Pavle, >> > >> > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic: >> >> Hi Hermann, >> >> >> >> Thank you so much for your help. I didn't really get most of what you >> >> said (way to technical for me), but at least I know now which tuner I >> >> should use, so I'll keep testing with tuner 69 and see if I get >> >> results. >> > >> > that one should be right, especially for analog radio. >> > >> >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card >> >> work for my cable tv which uses PAL BG (at least so they say). >> > >> > Lots of people are on the move these days, therefore it is important to >> > know too, what they might carry with them. That tuner should be fine >> > then. >> > >> >> I'll report back after testing on tuner 69 (I'll simply try all card >> >> ids with this tuner id). In the meantime here's some more info: >> > >> > Better is to follow the advice how you can narrow down such stuff. >> > >> > As far I know, we have not destroyed a single device yet on the saa7134 >> > driver, but to go over all possibilities, concerning voltage and gpios, >> > has some risks and is not the shortest way to come closer. >> > >> > Thanks for your input. >> > >> > Cheers, >> > Hermann >> > >> >> dmesg: >> >> >> >> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded >> >> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low) >> >> -> IRQ 17 >> >> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17, >> >> latency: 64, mmio: 0xfdffe000 >> >> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board: >> >> UNKNOWN/GENERIC [card=0,autodetected] >> >> [ 9.829458] saa7130[0]: board init: gpio is 6200c >> >> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on >> >> shared IRQs >> >> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 >> >> 43 a9 1c 55 d2 b2 92 >> >> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 >> >> ff 00 8c ff ff ff ff >> >> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 >> >> ff ff ff ff ff ff ff >> >> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff >> >> ff ff ff ff ff ff ff >> >> [ 9.980876] saa7130[0]: registered device video0 [v4l2] >> >> [ 9.980908] saa7130[0]: registered device vbi0 >> >> >> >> >> >> lsmod: >> >> >> >> saa7134 135552 0 >> >> ir_common 47172 1 saa7134 >> >> v4l2_common 14308 1 saa7134 >> >> videodev 31040 2 saa7134,v4l2_common >> >> videobuf_dma_sg 11340 1 saa7134 >> >> videobuf_core 16164 2 saa7134,videobuf_dma_sg >> >> tveeprom 10720 1 saa7134 >> >> i2c_core 20844 4 >> >> i2c_viapro,saa7134,v4l2_common,tveeprom >> >> >> >> lspci: >> >> >> >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 >> >> Video Broadcast Decoder [1131:7130] (rev 01) >> >> Subsystem: LeadTek Research Inc. Device [107d:6f3a] >> >> Flags: bus master, medium devsel, latency 64, IRQ 17 >> >> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] >> >> Capabilities: [40] Power Management version 1 >> >> Kernel driver in use: saa7134 >> >> Kernel modules: saa7134 >> >> >> >> Thanks again, >> >> >> >> Pavle. >> >> >> >> >> >> >> >> >> >> >> >> ______________________________________________________________________ >> >> From: hermann pitton <hermann-pitton@arcor.de> >> >> To: Pavle Predic <pavle.predic@yahoo.co.uk> >> >> Cc: video4linux-list@redhat.com >> >> Sent: Sun, 8 November, 2009 23:35:08 >> >> Subject: Re: Leadtek Winfast TV2100 >> >> >> >> Hi Pavle, >> >> >> >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic: >> >> > Did anyone manage to get this card working on Linux? I got the >> >> picture out of the box, but it's impossible to get any sound from the >> >> damned thing. The card is not on CARDLIST.saa7134, but I assume a >> >> similar card/tuner combination can be used. But which? By the way, I >> >> got the speakers connected directly to card output, I'm not even >> >> trying to get it working with my sound card. I can hear clicks when >> >> loading/unloading modules, so it's alive but not set up properly. >> >> > >> >> > Any info would be greatly appreciated. Perhaps someone knows of >> >> another card that is similar to this one? >> >> > >> >> > Card info: >> >> > Chipset: saa7134 >> >> > Tuner: Tvision TVF88T5-B/DFF >> >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7, >> >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68 >> >> >> >> that is not enough information yet. >> >> >> >> The correct tuner for this one is tuner=69. >> >> >> >> Only with this one you will have also radio support. >> >> >> >> Since you mail from an UK mail provider, this tuner is not expected to >> >> work with PAL-I TV stereo sound there, but radio would work. >> >> >> >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for >> >> TV >> >> sound are only found on saa7130 chips, except there is also an extra >> >> TV >> >> mono section directly from the tuner) work for TV sound, most often >> >> an >> >> external audio mux is in the way and needs to be configured correctly >> >> with saa7134 gpio pins. Looking also at the minor chips on the card >> >> with >> >> more than 3 pins can reveal such a mux. >> >> >> >> There is also a software test on such hardware, succeeding in most >> >> cases. >> >> >> >> By default, external analog audio input is looped through to analog >> >> audio out, on which you are listening, if the driver is unloaded. >> >> >> >> On a saa7134 chip, on saa7130 are some known specials, you should hear >> >> the incoming sound directly on your headphones or what else you might >> >> be >> >> using directly connected to your card, trying on LINE1 and LINE2 for >> >> that. >> >> >> >> If not, you can expect that such a mux chip needs to be treated >> >> correctly. >> >> >> >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify >> >> such gpios in use, else you must trace lines and resistors on it. >> >> >> >> In general, an absolute minimum is to provide related "dmesg" after >> >> loading the driver _without_ having tried on other cards previously. >> >> >> >> Please read more on the linuxtv.org wiki about adding support for a >> >> new >> >> card. >> >> >> >> Cheers, >> >> Hermann >> > >> > > > > Jetzt NEU: Do it youself E-Cards bei Arcor.de! > Stellen Sie Ihr eigenes Unikat zusammen und machen Sie dem Empfänger eine ganz persönliche Freude! > E-Card Marke Eigenbau: HIER KLICKEN: http://www.arcor.de/rd/footer.ecard > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-22 12:51 ` Terry Wu @ 2009-11-22 22:30 ` hermann pitton 2009-11-23 1:23 ` Terry Wu 0 siblings, 1 reply; 20+ messages in thread From: hermann pitton @ 2009-11-22 22:30 UTC (permalink / raw) To: Terry Wu; +Cc: video4linux-list Hi, Am Sonntag, den 22.11.2009, 20:51 +0800 schrieb Terry Wu: > Hi, > > I will give you the tuner data sheet and schematic of GPIO tomorrow. > Stay tuned. > > Terry that is of course very welcome. We know that the PLL chip is TI sn761677, datasheet is publicly available, radio switch is 0x11 and inside is a TENA tuner PCB also known from other tuners. For the gpio configuration hopefully my assumptions should not be that wrong. Pavle, are you able to test such yourself or should I provide some patches? Cheers, Hermann > 2009/11/22 <hermann-pitton@arcor.de>: > > Hi, > > > > sorry, posting from a webmail interface. > > > > Might get bounced from the list. > > > > ----- Original Nachricht ---- > > Von: Pavle Predic <pavle.predic@yahoo.co.uk> > > An: Terry Wu <terrywu2009@gmail.com>, hermann pitton <hermann-pitton@arcor.de> > > Datum: 21.11.2009 20:53 > > Betreff: Re: Leadtek Winfast TV2100 > > > >> Hey Terry, > >> > >> Thanks for your input. Yes it would seem that my tuner is not supported > >> (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was > >> hoping that an existing board/tuner combination might do the job. > >> > >> @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get > >> sound. Interestingly enough, almost all card ids produce a picture with this > >> tuner. Also, I noticed that with some board IDs I'm getting clicks when > >> muting/unmuting or switching channels, but no broadcast sound > >> whatsoever...:( > > > > Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL. > > I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies. > > > >> I also tried running regspy.exe (after booting to Windows) and performed the > >> test as described on dscaler site. But the results are way to cryptic for > >> me...I have no clue how to use this. So I'll paste it here, and maybe > >> someone will be able to draw a conclusion: > >> > > Ah, good. > > > >> SAA7130 Card [0]: > >> > >> Vendor ID: 0x1131 > >> Device ID: 0x7130 > >> Subsystem ID: 0x6f3a107d > >> > >> > >> 7 states dumped > >> > >> ---------------------------------------------------------------------------- > >> ------ > >> > >> SAA7130 Card - State 0: > >> SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 > >> 00001001) > >> SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 > >> 00001100) > >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> > >> SAA7134_ANALOG_IO_SELECT: 3b * (00111011) > >> > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> > >> Changes: State 0 -> State 1: > >> SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- > >> -------- -----0--) > >> SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- > >> -------- ----11--) > >> SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11) > >> > >> > >> 3 changes > >> > >> > >> ---------------------------------------------------------------------------- > >> ------ > >> > >> SAA7130 Card - State 1: > >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> 00001101) (was: 80000009) > >> SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 > >> 00000000) (was: 0606200c) > >> SAA7134_ANALOG_IN_CTRL1: c1 * (11000001) > >> > >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) > >> (was: 3b) > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> > >> Changes: State 1 -> State 2: > >> SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- > >> -------- ----0---) > >> SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-) > >> > >> SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0) > >> > >> > >> 3 changes > >> > >> > >> ---------------------------------------------------------------------------- > >> ------ > >> > >> SAA7130 Card - State 2: > >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> 00001101) > >> SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 > >> 00001000) (was: 00062000) > >> SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) > >> (was: c1) > >> SAA7134_ANALOG_IO_SELECT: 09 (00001001) > >> (was: 00) > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> > >> Changes: State 2 -> State 3: > >> SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11) > >> > >> > >> 1 changes > >> > >> > >> ---------------------------------------------------------------------------- > >> ------ > >> > >> SAA7130 Card - State 3: > >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> 00001101) > >> SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 > >> 00001000) > >> SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) > >> (was: 83) > >> SAA7134_ANALOG_IO_SELECT: 09 * (00001001) > >> > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> > >> Changes: State 3 -> State 4: > >> SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- > >> -------- ----10--) > >> SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) > >> (same as 0, 1) > >> SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) > >> (same as 1) > >> > >> 3 changes > >> > >> > >> ---------------------------------------------------------------------------- > >> ------ > >> > >> SAA7130 Card - State 4: > >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> 00001101) > >> SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 > >> 00000100) (was: 00062008) > >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> (was: c8) > >> SAA7134_ANALOG_IO_SELECT: 00 (00000000) > >> (was: 09) > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> > >> Changes: State 4 -> State 5: > >> SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- > >> -------- -----1--) > >> > >> 1 changes > >> > >> > >> ---------------------------------------------------------------------------- > >> ------ > >> > >> SAA7130 Card - State 5: > >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> 00001101) > >> SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 > >> 00000000) (was: 04062004) > >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> > >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) > >> > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> > >> Changes: State 5 -> Register Dump: > >> SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- > >> -------- ----0---) > >> SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-) > >> > >> > >> 2 changes > >> > >> > >> ============================================================================ > >> ===== > >> > >> SAA7130 Card - Register Dump: > >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> 00001101) > >> SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 > >> 00001000) (was: 02062000) > >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> > >> SAA7134_ANALOG_IO_SELECT: 02 (00000010) > >> (was: 00) > >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> 00000000) > >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> > >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> > >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> > >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> > >> SAA7134_TS_PARALLEL: 04 (00000100) > >> > >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> > >> SAA7134_TS_SERIAL0: 00 (00000000) > >> > >> SAA7134_TS_SERIAL1: 00 (00000000) > >> > >> SAA7134_TS_DMA0: 00 (00000000) > >> > >> SAA7134_TS_DMA1: 00 (00000000) > >> > >> SAA7134_TS_DMA2: 00 (00000000) > >> > >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> > >> > >> end of dump > >> > >> Here is the order in which I performed the test:State 6 > >> State 0 - viewing software off > >> State 1 - tuner mode > >> State 2 - composite mode > >> State 3 - s video mode > >> State 4 - radio mode > >> State 5 - tuner mode (again) > >> Final dump - viewing software off (again) > >> > >> Thanks to everyone for your help. > >> > >> Pavle. > >> > > > > Better don't top post. Becomes hard to read after a while. > > > > You would try wsith a gpio_mask = 0x0d. > > > > .gpio for TV is 0x00000000 (default, don't even need to set it). > > > > For s-video and composite 0x08. > > > > For radio 0x04. > > > > On saa7130 chips mono audio from tuner in most cases is connected to LINE2. > > > > Then also radio is on LINE2 and s-video and composite on LINE1. > > > > For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08. > > > > Maybe Terry knows better. > > > > Good luck for testing. > > > > Cheers, > > Hermann > > > >> > >> ________________________________ > >> From: Terry Wu <terrywu2009@gmail.com> > >> To: hermann pitton <hermann-pitton@arcor.de> > >> Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com > >> Sent: Sat, 21 November, 2009 10:07:05 > >> Subject: Re: Leadtek Winfast TV2100 > >> > >> Hi, > >> > >> There are many models of TV2100. > >> Different model uses different TV tuner. > >> > >> The tuner 69 is TUNER_TNF_5335MF. > >> Make sure the tuner in your TV2100 card is the TNF_5335MF. > >> > >> Maybe the tuner in your TV2100 card is not supported by current > >> v4l-dvb driver yet (linux\include\media\tuner.h). > >> > >> > >> Terry > >> > >> 2009/11/21 hermann pitton <hermann-pitton@arcor.de>: > >> > Hi Pavle, > >> > > >> > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic: > >> >> Hi Hermann, > >> >> > >> >> Thank you so much for your help. I didn't really get most of what you > >> >> said (way to technical for me), but at least I know now which tuner I > >> >> should use, so I'll keep testing with tuner 69 and see if I get > >> >> results. > >> > > >> > that one should be right, especially for analog radio. > >> > > >> >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card > >> >> work for my cable tv which uses PAL BG (at least so they say). > >> > > >> > Lots of people are on the move these days, therefore it is important to > >> > know too, what they might carry with them. That tuner should be fine > >> > then. > >> > > >> >> I'll report back after testing on tuner 69 (I'll simply try all card > >> >> ids with this tuner id). In the meantime here's some more info: > >> > > >> > Better is to follow the advice how you can narrow down such stuff. > >> > > >> > As far I know, we have not destroyed a single device yet on the saa7134 > >> > driver, but to go over all possibilities, concerning voltage and gpios, > >> > has some risks and is not the shortest way to come closer. > >> > > >> > Thanks for your input. > >> > > >> > Cheers, > >> > Hermann > >> > > >> >> dmesg: > >> >> > >> >> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded > >> >> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low) > >> >> -> IRQ 17 > >> >> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17, > >> >> latency: 64, mmio: 0xfdffe000 > >> >> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board: > >> >> UNKNOWN/GENERIC [card=0,autodetected] > >> >> [ 9.829458] saa7130[0]: board init: gpio is 6200c > >> >> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on > >> >> shared IRQs > >> >> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 > >> >> 43 a9 1c 55 d2 b2 92 > >> >> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 > >> >> ff 00 8c ff ff ff ff > >> >> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > >> >> ff ff ff ff ff ff ff > >> >> [ 9.980876] saa7130[0]: registered device video0 [v4l2] > >> >> [ 9.980908] saa7130[0]: registered device vbi0 > >> >> > >> >> > >> >> lsmod: > >> >> > >> >> saa7134 135552 0 > >> >> ir_common 47172 1 saa7134 > >> >> v4l2_common 14308 1 saa7134 > >> >> videodev 31040 2 saa7134,v4l2_common > >> >> videobuf_dma_sg 11340 1 saa7134 > >> >> videobuf_core 16164 2 saa7134,videobuf_dma_sg > >> >> tveeprom 10720 1 saa7134 > >> >> i2c_core 20844 4 > >> >> i2c_viapro,saa7134,v4l2_common,tveeprom > >> >> > >> >> lspci: > >> >> > >> >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 > >> >> Video Broadcast Decoder [1131:7130] (rev 01) > >> >> Subsystem: LeadTek Research Inc. Device [107d:6f3a] > >> >> Flags: bus master, medium devsel, latency 64, IRQ 17 > >> >> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] > >> >> Capabilities: [40] Power Management version 1 > >> >> Kernel driver in use: saa7134 > >> >> Kernel modules: saa7134 > >> >> > >> >> Thanks again, > >> >> > >> >> Pavle. > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> ______________________________________________________________________ > >> >> From: hermann pitton <hermann-pitton@arcor.de> > >> >> To: Pavle Predic <pavle.predic@yahoo.co.uk> > >> >> Cc: video4linux-list@redhat.com > >> >> Sent: Sun, 8 November, 2009 23:35:08 > >> >> Subject: Re: Leadtek Winfast TV2100 > >> >> > >> >> Hi Pavle, > >> >> > >> >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic: > >> >> > Did anyone manage to get this card working on Linux? I got the > >> >> picture out of the box, but it's impossible to get any sound from the > >> >> damned thing. The card is not on CARDLIST.saa7134, but I assume a > >> >> similar card/tuner combination can be used. But which? By the way, I > >> >> got the speakers connected directly to card output, I'm not even > >> >> trying to get it working with my sound card. I can hear clicks when > >> >> loading/unloading modules, so it's alive but not set up properly. > >> >> > > >> >> > Any info would be greatly appreciated. Perhaps someone knows of > >> >> another card that is similar to this one? > >> >> > > >> >> > Card info: > >> >> > Chipset: saa7134 > >> >> > Tuner: Tvision TVF88T5-B/DFF > >> >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7, > >> >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68 > >> >> > >> >> that is not enough information yet. > >> >> > >> >> The correct tuner for this one is tuner=69. > >> >> > >> >> Only with this one you will have also radio support. > >> >> > >> >> Since you mail from an UK mail provider, this tuner is not expected to > >> >> work with PAL-I TV stereo sound there, but radio would work. > >> >> > >> >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for > >> >> TV > >> >> sound are only found on saa7130 chips, except there is also an extra > >> >> TV > >> >> mono section directly from the tuner) work for TV sound, most often > >> >> an > >> >> external audio mux is in the way and needs to be configured correctly > >> >> with saa7134 gpio pins. Looking also at the minor chips on the card > >> >> with > >> >> more than 3 pins can reveal such a mux. > >> >> > >> >> There is also a software test on such hardware, succeeding in most > >> >> cases. > >> >> > >> >> By default, external analog audio input is looped through to analog > >> >> audio out, on which you are listening, if the driver is unloaded. > >> >> > >> >> On a saa7134 chip, on saa7130 are some known specials, you should hear > >> >> the incoming sound directly on your headphones or what else you might > >> >> be > >> >> using directly connected to your card, trying on LINE1 and LINE2 for > >> >> that. > >> >> > >> >> If not, you can expect that such a mux chip needs to be treated > >> >> correctly. > >> >> > >> >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify > >> >> such gpios in use, else you must trace lines and resistors on it. > >> >> > >> >> In general, an absolute minimum is to provide related "dmesg" after > >> >> loading the driver _without_ having tried on other cards previously. > >> >> > >> >> Please read more on the linuxtv.org wiki about adding support for a > >> >> new > >> >> card. > >> >> > >> >> Cheers, > >> >> Hermann > >> > > >> > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-22 22:30 ` hermann pitton @ 2009-11-23 1:23 ` Terry Wu 2009-11-23 1:42 ` Terry Wu 2009-11-23 1:47 ` hermann pitton 0 siblings, 2 replies; 20+ messages in thread From: Terry Wu @ 2009-11-23 1:23 UTC (permalink / raw) To: hermann pitton; +Cc: video4linux-list [-- Attachment #1: Type: text/plain, Size: 26568 bytes --] Hi, The TVF88T5-BDFF data sheet is attached. Terry Wu 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf 2009/11/23 hermann pitton <hermann-pitton@arcor.de>: > Hi, > > Am Sonntag, den 22.11.2009, 20:51 +0800 schrieb Terry Wu: >> Hi, >> >> I will give you the tuner data sheet and schematic of GPIO tomorrow. >> Stay tuned. >> >> Terry > > that is of course very welcome. > > We know that the PLL chip is TI sn761677, datasheet is publicly > available, radio switch is 0x11 and inside is a TENA tuner PCB also > known from other tuners. > > For the gpio configuration hopefully my assumptions should not be that > wrong. > > Pavle, are you able to test such yourself or should I provide some > patches? > > Cheers, > Hermann > >> 2009/11/22 <hermann-pitton@arcor.de>: >> > Hi, >> > >> > sorry, posting from a webmail interface. >> > >> > Might get bounced from the list. >> > >> > ----- Original Nachricht ---- >> > Von: Pavle Predic <pavle.predic@yahoo.co.uk> >> > An: Terry Wu <terrywu2009@gmail.com>, hermann pitton <hermann-pitton@arcor.de> >> > Datum: 21.11.2009 20:53 >> > Betreff: Re: Leadtek Winfast TV2100 >> > >> >> Hey Terry, >> >> >> >> Thanks for your input. Yes it would seem that my tuner is not supported >> >> (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was >> >> hoping that an existing board/tuner combination might do the job. >> >> >> >> @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get >> >> sound. Interestingly enough, almost all card ids produce a picture with this >> >> tuner. Also, I noticed that with some board IDs I'm getting clicks when >> >> muting/unmuting or switching channels, but no broadcast sound >> >> whatsoever...:( >> > >> > Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL. >> > I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies. >> > >> >> I also tried running regspy.exe (after booting to Windows) and performed the >> >> test as described on dscaler site. But the results are way to cryptic for >> >> me...I have no clue how to use this. So I'll paste it here, and maybe >> >> someone will be able to draw a conclusion: >> >> >> > Ah, good. >> > >> >> SAA7130 Card [0]: >> >> >> >> Vendor ID: 0x1131 >> >> Device ID: 0x7130 >> >> Subsystem ID: 0x6f3a107d >> >> >> >> >> >> 7 states dumped >> >> >> >> ---------------------------------------------------------------------------- >> >> ------ >> >> >> >> SAA7130 Card - State 0: >> >> SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 >> >> 00001001) >> >> SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 >> >> 00001100) >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> >> >> SAA7134_ANALOG_IO_SELECT: 3b * (00111011) >> >> >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> >> >> Changes: State 0 -> State 1: >> >> SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- >> >> -------- -----0--) >> >> SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- >> >> -------- ----11--) >> >> SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11) >> >> >> >> >> >> 3 changes >> >> >> >> >> >> ---------------------------------------------------------------------------- >> >> ------ >> >> >> >> SAA7130 Card - State 1: >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> >> 00001101) (was: 80000009) >> >> SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 >> >> 00000000) (was: 0606200c) >> >> SAA7134_ANALOG_IN_CTRL1: c1 * (11000001) >> >> >> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) >> >> (was: 3b) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> >> >> Changes: State 1 -> State 2: >> >> SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- >> >> -------- ----0---) >> >> SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-) >> >> >> >> SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0) >> >> >> >> >> >> 3 changes >> >> >> >> >> >> ---------------------------------------------------------------------------- >> >> ------ >> >> >> >> SAA7130 Card - State 2: >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> >> 00001101) >> >> SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 >> >> 00001000) (was: 00062000) >> >> SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) >> >> (was: c1) >> >> SAA7134_ANALOG_IO_SELECT: 09 (00001001) >> >> (was: 00) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> >> >> Changes: State 2 -> State 3: >> >> SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11) >> >> >> >> >> >> 1 changes >> >> >> >> >> >> ---------------------------------------------------------------------------- >> >> ------ >> >> >> >> SAA7130 Card - State 3: >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> >> 00001101) >> >> SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 >> >> 00001000) >> >> SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) >> >> (was: 83) >> >> SAA7134_ANALOG_IO_SELECT: 09 * (00001001) >> >> >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> >> >> Changes: State 3 -> State 4: >> >> SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- >> >> -------- ----10--) >> >> SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) >> >> (same as 0, 1) >> >> SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) >> >> (same as 1) >> >> >> >> 3 changes >> >> >> >> >> >> ---------------------------------------------------------------------------- >> >> ------ >> >> >> >> SAA7130 Card - State 4: >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> >> 00001101) >> >> SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 >> >> 00000100) (was: 00062008) >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> (was: c8) >> >> SAA7134_ANALOG_IO_SELECT: 00 (00000000) >> >> (was: 09) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> >> >> Changes: State 4 -> State 5: >> >> SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- >> >> -------- -----1--) >> >> >> >> 1 changes >> >> >> >> >> >> ---------------------------------------------------------------------------- >> >> ------ >> >> >> >> SAA7130 Card - State 5: >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> >> 00001101) >> >> SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 >> >> 00000000) (was: 04062004) >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> >> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) >> >> >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> >> >> Changes: State 5 -> Register Dump: >> >> SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- >> >> -------- ----0---) >> >> SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-) >> >> >> >> >> >> 2 changes >> >> >> >> >> >> ============================================================================ >> >> ===== >> >> >> >> SAA7130 Card - Register Dump: >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >> >> 00001101) >> >> SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 >> >> 00001000) (was: 02062000) >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >> >> >> >> SAA7134_ANALOG_IO_SELECT: 02 (00000010) >> >> (was: 00) >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >> >> 00000000) >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >> >> >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >> >> >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >> >> >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >> >> >> >> SAA7134_TS_PARALLEL: 04 (00000100) >> >> >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL0: 00 (00000000) >> >> >> >> SAA7134_TS_SERIAL1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA0: 00 (00000000) >> >> >> >> SAA7134_TS_DMA1: 00 (00000000) >> >> >> >> SAA7134_TS_DMA2: 00 (00000000) >> >> >> >> SAA7134_SPECIAL_MODE: 01 (00000001) >> >> >> >> >> >> end of dump >> >> >> >> Here is the order in which I performed the test:State 6 >> >> State 0 - viewing software off >> >> State 1 - tuner mode >> >> State 2 - composite mode >> >> State 3 - s video mode >> >> State 4 - radio mode >> >> State 5 - tuner mode (again) >> >> Final dump - viewing software off (again) >> >> >> >> Thanks to everyone for your help. >> >> >> >> Pavle. >> >> >> > >> > Better don't top post. Becomes hard to read after a while. >> > >> > You would try wsith a gpio_mask = 0x0d. >> > >> > .gpio for TV is 0x00000000 (default, don't even need to set it). >> > >> > For s-video and composite 0x08. >> > >> > For radio 0x04. >> > >> > On saa7130 chips mono audio from tuner in most cases is connected to LINE2. >> > >> > Then also radio is on LINE2 and s-video and composite on LINE1. >> > >> > For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08. >> > >> > Maybe Terry knows better. >> > >> > Good luck for testing. >> > >> > Cheers, >> > Hermann >> > >> >> >> >> ________________________________ >> >> From: Terry Wu <terrywu2009@gmail.com> >> >> To: hermann pitton <hermann-pitton@arcor.de> >> >> Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com >> >> Sent: Sat, 21 November, 2009 10:07:05 >> >> Subject: Re: Leadtek Winfast TV2100 >> >> >> >> Hi, >> >> >> >> There are many models of TV2100. >> >> Different model uses different TV tuner. >> >> >> >> The tuner 69 is TUNER_TNF_5335MF. >> >> Make sure the tuner in your TV2100 card is the TNF_5335MF. >> >> >> >> Maybe the tuner in your TV2100 card is not supported by current >> >> v4l-dvb driver yet (linux\include\media\tuner.h). >> >> >> >> >> >> Terry >> >> >> >> 2009/11/21 hermann pitton <hermann-pitton@arcor.de>: >> >> > Hi Pavle, >> >> > >> >> > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic: >> >> >> Hi Hermann, >> >> >> >> >> >> Thank you so much for your help. I didn't really get most of what you >> >> >> said (way to technical for me), but at least I know now which tuner I >> >> >> should use, so I'll keep testing with tuner 69 and see if I get >> >> >> results. >> >> > >> >> > that one should be right, especially for analog radio. >> >> > >> >> >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card >> >> >> work for my cable tv which uses PAL BG (at least so they say). >> >> > >> >> > Lots of people are on the move these days, therefore it is important to >> >> > know too, what they might carry with them. That tuner should be fine >> >> > then. >> >> > >> >> >> I'll report back after testing on tuner 69 (I'll simply try all card >> >> >> ids with this tuner id). In the meantime here's some more info: >> >> > >> >> > Better is to follow the advice how you can narrow down such stuff. >> >> > >> >> > As far I know, we have not destroyed a single device yet on the saa7134 >> >> > driver, but to go over all possibilities, concerning voltage and gpios, >> >> > has some risks and is not the shortest way to come closer. >> >> > >> >> > Thanks for your input. >> >> > >> >> > Cheers, >> >> > Hermann >> >> > >> >> >> dmesg: >> >> >> >> >> >> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded >> >> >> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low) >> >> >> -> IRQ 17 >> >> >> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17, >> >> >> latency: 64, mmio: 0xfdffe000 >> >> >> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board: >> >> >> UNKNOWN/GENERIC [card=0,autodetected] >> >> >> [ 9.829458] saa7130[0]: board init: gpio is 6200c >> >> >> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on >> >> >> shared IRQs >> >> >> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 >> >> >> 43 a9 1c 55 d2 b2 92 >> >> >> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 >> >> >> ff 00 8c ff ff ff ff >> >> >> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff >> >> >> ff ff ff ff ff ff ff >> >> >> [ 9.980876] saa7130[0]: registered device video0 [v4l2] >> >> >> [ 9.980908] saa7130[0]: registered device vbi0 >> >> >> >> >> >> >> >> >> lsmod: >> >> >> >> >> >> saa7134 135552 0 >> >> >> ir_common 47172 1 saa7134 >> >> >> v4l2_common 14308 1 saa7134 >> >> >> videodev 31040 2 saa7134,v4l2_common >> >> >> videobuf_dma_sg 11340 1 saa7134 >> >> >> videobuf_core 16164 2 saa7134,videobuf_dma_sg >> >> >> tveeprom 10720 1 saa7134 >> >> >> i2c_core 20844 4 >> >> >> i2c_viapro,saa7134,v4l2_common,tveeprom >> >> >> >> >> >> lspci: >> >> >> >> >> >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 >> >> >> Video Broadcast Decoder [1131:7130] (rev 01) >> >> >> Subsystem: LeadTek Research Inc. Device [107d:6f3a] >> >> >> Flags: bus master, medium devsel, latency 64, IRQ 17 >> >> >> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] >> >> >> Capabilities: [40] Power Management version 1 >> >> >> Kernel driver in use: saa7134 >> >> >> Kernel modules: saa7134 >> >> >> >> >> >> Thanks again, >> >> >> >> >> >> Pavle. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> ______________________________________________________________________ >> >> >> From: hermann pitton <hermann-pitton@arcor.de> >> >> >> To: Pavle Predic <pavle.predic@yahoo.co.uk> >> >> >> Cc: video4linux-list@redhat.com >> >> >> Sent: Sun, 8 November, 2009 23:35:08 >> >> >> Subject: Re: Leadtek Winfast TV2100 >> >> >> >> >> >> Hi Pavle, >> >> >> >> >> >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic: >> >> >> > Did anyone manage to get this card working on Linux? I got the >> >> >> picture out of the box, but it's impossible to get any sound from the >> >> >> damned thing. The card is not on CARDLIST.saa7134, but I assume a >> >> >> similar card/tuner combination can be used. But which? By the way, I >> >> >> got the speakers connected directly to card output, I'm not even >> >> >> trying to get it working with my sound card. I can hear clicks when >> >> >> loading/unloading modules, so it's alive but not set up properly. >> >> >> > >> >> >> > Any info would be greatly appreciated. Perhaps someone knows of >> >> >> another card that is similar to this one? >> >> >> > >> >> >> > Card info: >> >> >> > Chipset: saa7134 >> >> >> > Tuner: Tvision TVF88T5-B/DFF >> >> >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7, >> >> >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68 >> >> >> >> >> >> that is not enough information yet. >> >> >> >> >> >> The correct tuner for this one is tuner=69. >> >> >> >> >> >> Only with this one you will have also radio support. >> >> >> >> >> >> Since you mail from an UK mail provider, this tuner is not expected to >> >> >> work with PAL-I TV stereo sound there, but radio would work. >> >> >> >> >> >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for >> >> >> TV >> >> >> sound are only found on saa7130 chips, except there is also an extra >> >> >> TV >> >> >> mono section directly from the tuner) work for TV sound, most often >> >> >> an >> >> >> external audio mux is in the way and needs to be configured correctly >> >> >> with saa7134 gpio pins. Looking also at the minor chips on the card >> >> >> with >> >> >> more than 3 pins can reveal such a mux. >> >> >> >> >> >> There is also a software test on such hardware, succeeding in most >> >> >> cases. >> >> >> >> >> >> By default, external analog audio input is looped through to analog >> >> >> audio out, on which you are listening, if the driver is unloaded. >> >> >> >> >> >> On a saa7134 chip, on saa7130 are some known specials, you should hear >> >> >> the incoming sound directly on your headphones or what else you might >> >> >> be >> >> >> using directly connected to your card, trying on LINE1 and LINE2 for >> >> >> that. >> >> >> >> >> >> If not, you can expect that such a mux chip needs to be treated >> >> >> correctly. >> >> >> >> >> >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify >> >> >> such gpios in use, else you must trace lines and resistors on it. >> >> >> >> >> >> In general, an absolute minimum is to provide related "dmesg" after >> >> >> loading the driver _without_ having tried on other cards previously. >> >> >> >> >> >> Please read more on the linuxtv.org wiki about adding support for a >> >> >> new >> >> >> card. >> >> >> >> >> >> Cheers, >> >> >> Hermann >> >> > >> >> > > > > [-- Attachment #2: TVF88T5-BDFF.zip --] [-- Type: application/zip, Size: 382169 bytes --] [-- Attachment #3: Type: text/plain, Size: 164 bytes --] -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-23 1:23 ` Terry Wu @ 2009-11-23 1:42 ` Terry Wu 2009-11-23 2:30 ` hermann pitton 2009-11-23 1:47 ` hermann pitton 1 sibling, 1 reply; 20+ messages in thread From: Terry Wu @ 2009-11-23 1:42 UTC (permalink / raw) To: hermann pitton; +Cc: video4linux-list [-- Attachment #1: Type: text/plain, Size: 27552 bytes --] Hi, Please refer to the attached JPEG file for the GPIO settings of TV2100 with FM (PCB:B). Let me know if you need the information of TV2100 without FM (PCB:A, TVF8533-BDF). Terry Wu 2009/11/23 Terry Wu <terrywu2009@gmail.com>: > Hi, > > The TVF88T5-BDFF data sheet is attached. > > Terry Wu > > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > > > 2009/11/23 hermann pitton <hermann-pitton@arcor.de>: >> Hi, >> >> Am Sonntag, den 22.11.2009, 20:51 +0800 schrieb Terry Wu: >>> Hi, >>> >>> I will give you the tuner data sheet and schematic of GPIO tomorrow. >>> Stay tuned. >>> >>> Terry >> >> that is of course very welcome. >> >> We know that the PLL chip is TI sn761677, datasheet is publicly >> available, radio switch is 0x11 and inside is a TENA tuner PCB also >> known from other tuners. >> >> For the gpio configuration hopefully my assumptions should not be that >> wrong. >> >> Pavle, are you able to test such yourself or should I provide some >> patches? >> >> Cheers, >> Hermann >> >>> 2009/11/22 <hermann-pitton@arcor.de>: >>> > Hi, >>> > >>> > sorry, posting from a webmail interface. >>> > >>> > Might get bounced from the list. >>> > >>> > ----- Original Nachricht ---- >>> > Von: Pavle Predic <pavle.predic@yahoo.co.uk> >>> > An: Terry Wu <terrywu2009@gmail.com>, hermann pitton <hermann-pitton@arcor.de> >>> > Datum: 21.11.2009 20:53 >>> > Betreff: Re: Leadtek Winfast TV2100 >>> > >>> >> Hey Terry, >>> >> >>> >> Thanks for your input. Yes it would seem that my tuner is not supported >>> >> (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was >>> >> hoping that an existing board/tuner combination might do the job. >>> >> >>> >> @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get >>> >> sound. Interestingly enough, almost all card ids produce a picture with this >>> >> tuner. Also, I noticed that with some board IDs I'm getting clicks when >>> >> muting/unmuting or switching channels, but no broadcast sound >>> >> whatsoever...:( >>> > >>> > Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL. >>> > I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies. >>> > >>> >> I also tried running regspy.exe (after booting to Windows) and performed the >>> >> test as described on dscaler site. But the results are way to cryptic for >>> >> me...I have no clue how to use this. So I'll paste it here, and maybe >>> >> someone will be able to draw a conclusion: >>> >> >>> > Ah, good. >>> > >>> >> SAA7130 Card [0]: >>> >> >>> >> Vendor ID: 0x1131 >>> >> Device ID: 0x7130 >>> >> Subsystem ID: 0x6f3a107d >>> >> >>> >> >>> >> 7 states dumped >>> >> >>> >> ---------------------------------------------------------------------------- >>> >> ------ >>> >> >>> >> SAA7130 Card - State 0: >>> >> SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 >>> >> 00001001) >>> >> SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 >>> >> 00001100) >>> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >>> >> >>> >> SAA7134_ANALOG_IO_SELECT: 3b * (00111011) >>> >> >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> >>> >> Changes: State 0 -> State 1: >>> >> SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- >>> >> -------- -----0--) >>> >> SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- >>> >> -------- ----11--) >>> >> SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11) >>> >> >>> >> >>> >> 3 changes >>> >> >>> >> >>> >> ---------------------------------------------------------------------------- >>> >> ------ >>> >> >>> >> SAA7130 Card - State 1: >>> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >>> >> 00001101) (was: 80000009) >>> >> SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 >>> >> 00000000) (was: 0606200c) >>> >> SAA7134_ANALOG_IN_CTRL1: c1 * (11000001) >>> >> >>> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) >>> >> (was: 3b) >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> >>> >> Changes: State 1 -> State 2: >>> >> SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- >>> >> -------- ----0---) >>> >> SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-) >>> >> >>> >> SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0) >>> >> >>> >> >>> >> 3 changes >>> >> >>> >> >>> >> ---------------------------------------------------------------------------- >>> >> ------ >>> >> >>> >> SAA7130 Card - State 2: >>> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >>> >> 00001101) >>> >> SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 >>> >> 00001000) (was: 00062000) >>> >> SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) >>> >> (was: c1) >>> >> SAA7134_ANALOG_IO_SELECT: 09 (00001001) >>> >> (was: 00) >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> >>> >> Changes: State 2 -> State 3: >>> >> SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11) >>> >> >>> >> >>> >> 1 changes >>> >> >>> >> >>> >> ---------------------------------------------------------------------------- >>> >> ------ >>> >> >>> >> SAA7130 Card - State 3: >>> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >>> >> 00001101) >>> >> SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 >>> >> 00001000) >>> >> SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) >>> >> (was: 83) >>> >> SAA7134_ANALOG_IO_SELECT: 09 * (00001001) >>> >> >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> >>> >> Changes: State 3 -> State 4: >>> >> SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- >>> >> -------- ----10--) >>> >> SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) >>> >> (same as 0, 1) >>> >> SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) >>> >> (same as 1) >>> >> >>> >> 3 changes >>> >> >>> >> >>> >> ---------------------------------------------------------------------------- >>> >> ------ >>> >> >>> >> SAA7130 Card - State 4: >>> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >>> >> 00001101) >>> >> SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 >>> >> 00000100) (was: 00062008) >>> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >>> >> (was: c8) >>> >> SAA7134_ANALOG_IO_SELECT: 00 (00000000) >>> >> (was: 09) >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> >>> >> Changes: State 4 -> State 5: >>> >> SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- >>> >> -------- -----1--) >>> >> >>> >> 1 changes >>> >> >>> >> >>> >> ---------------------------------------------------------------------------- >>> >> ------ >>> >> >>> >> SAA7130 Card - State 5: >>> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >>> >> 00001101) >>> >> SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 >>> >> 00000000) (was: 04062004) >>> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >>> >> >>> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) >>> >> >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> >>> >> Changes: State 5 -> Register Dump: >>> >> SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- >>> >> -------- ----0---) >>> >> SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-) >>> >> >>> >> >>> >> 2 changes >>> >> >>> >> >>> >> ============================================================================ >>> >> ===== >>> >> >>> >> SAA7130 Card - Register Dump: >>> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 >>> >> 00001101) >>> >> SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 >>> >> 00001000) (was: 02062000) >>> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) >>> >> >>> >> SAA7134_ANALOG_IO_SELECT: 02 (00000010) >>> >> (was: 00) >>> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 >>> >> 00000000) >>> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) >>> >> >>> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) >>> >> >>> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) >>> >> >>> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) >>> >> >>> >> SAA7134_TS_PARALLEL: 04 (00000100) >>> >> >>> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL0: 00 (00000000) >>> >> >>> >> SAA7134_TS_SERIAL1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA0: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA1: 00 (00000000) >>> >> >>> >> SAA7134_TS_DMA2: 00 (00000000) >>> >> >>> >> SAA7134_SPECIAL_MODE: 01 (00000001) >>> >> >>> >> >>> >> end of dump >>> >> >>> >> Here is the order in which I performed the test:State 6 >>> >> State 0 - viewing software off >>> >> State 1 - tuner mode >>> >> State 2 - composite mode >>> >> State 3 - s video mode >>> >> State 4 - radio mode >>> >> State 5 - tuner mode (again) >>> >> Final dump - viewing software off (again) >>> >> >>> >> Thanks to everyone for your help. >>> >> >>> >> Pavle. >>> >> >>> > >>> > Better don't top post. Becomes hard to read after a while. >>> > >>> > You would try wsith a gpio_mask = 0x0d. >>> > >>> > .gpio for TV is 0x00000000 (default, don't even need to set it). >>> > >>> > For s-video and composite 0x08. >>> > >>> > For radio 0x04. >>> > >>> > On saa7130 chips mono audio from tuner in most cases is connected to LINE2. >>> > >>> > Then also radio is on LINE2 and s-video and composite on LINE1. >>> > >>> > For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08. >>> > >>> > Maybe Terry knows better. >>> > >>> > Good luck for testing. >>> > >>> > Cheers, >>> > Hermann >>> > >>> >> >>> >> ________________________________ >>> >> From: Terry Wu <terrywu2009@gmail.com> >>> >> To: hermann pitton <hermann-pitton@arcor.de> >>> >> Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com >>> >> Sent: Sat, 21 November, 2009 10:07:05 >>> >> Subject: Re: Leadtek Winfast TV2100 >>> >> >>> >> Hi, >>> >> >>> >> There are many models of TV2100. >>> >> Different model uses different TV tuner. >>> >> >>> >> The tuner 69 is TUNER_TNF_5335MF. >>> >> Make sure the tuner in your TV2100 card is the TNF_5335MF. >>> >> >>> >> Maybe the tuner in your TV2100 card is not supported by current >>> >> v4l-dvb driver yet (linux\include\media\tuner.h). >>> >> >>> >> >>> >> Terry >>> >> >>> >> 2009/11/21 hermann pitton <hermann-pitton@arcor.de>: >>> >> > Hi Pavle, >>> >> > >>> >> > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic: >>> >> >> Hi Hermann, >>> >> >> >>> >> >> Thank you so much for your help. I didn't really get most of what you >>> >> >> said (way to technical for me), but at least I know now which tuner I >>> >> >> should use, so I'll keep testing with tuner 69 and see if I get >>> >> >> results. >>> >> > >>> >> > that one should be right, especially for analog radio. >>> >> > >>> >> >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card >>> >> >> work for my cable tv which uses PAL BG (at least so they say). >>> >> > >>> >> > Lots of people are on the move these days, therefore it is important to >>> >> > know too, what they might carry with them. That tuner should be fine >>> >> > then. >>> >> > >>> >> >> I'll report back after testing on tuner 69 (I'll simply try all card >>> >> >> ids with this tuner id). In the meantime here's some more info: >>> >> > >>> >> > Better is to follow the advice how you can narrow down such stuff. >>> >> > >>> >> > As far I know, we have not destroyed a single device yet on the saa7134 >>> >> > driver, but to go over all possibilities, concerning voltage and gpios, >>> >> > has some risks and is not the shortest way to come closer. >>> >> > >>> >> > Thanks for your input. >>> >> > >>> >> > Cheers, >>> >> > Hermann >>> >> > >>> >> >> dmesg: >>> >> >> >>> >> >> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded >>> >> >> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low) >>> >> >> -> IRQ 17 >>> >> >> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17, >>> >> >> latency: 64, mmio: 0xfdffe000 >>> >> >> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board: >>> >> >> UNKNOWN/GENERIC [card=0,autodetected] >>> >> >> [ 9.829458] saa7130[0]: board init: gpio is 6200c >>> >> >> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on >>> >> >> shared IRQs >>> >> >> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 >>> >> >> 43 a9 1c 55 d2 b2 92 >>> >> >> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 >>> >> >> ff 00 8c ff ff ff ff >>> >> >> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff >>> >> >> ff ff ff ff ff ff ff >>> >> >> [ 9.980876] saa7130[0]: registered device video0 [v4l2] >>> >> >> [ 9.980908] saa7130[0]: registered device vbi0 >>> >> >> >>> >> >> >>> >> >> lsmod: >>> >> >> >>> >> >> saa7134 135552 0 >>> >> >> ir_common 47172 1 saa7134 >>> >> >> v4l2_common 14308 1 saa7134 >>> >> >> videodev 31040 2 saa7134,v4l2_common >>> >> >> videobuf_dma_sg 11340 1 saa7134 >>> >> >> videobuf_core 16164 2 saa7134,videobuf_dma_sg >>> >> >> tveeprom 10720 1 saa7134 >>> >> >> i2c_core 20844 4 >>> >> >> i2c_viapro,saa7134,v4l2_common,tveeprom >>> >> >> >>> >> >> lspci: >>> >> >> >>> >> >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 >>> >> >> Video Broadcast Decoder [1131:7130] (rev 01) >>> >> >> Subsystem: LeadTek Research Inc. Device [107d:6f3a] >>> >> >> Flags: bus master, medium devsel, latency 64, IRQ 17 >>> >> >> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] >>> >> >> Capabilities: [40] Power Management version 1 >>> >> >> Kernel driver in use: saa7134 >>> >> >> Kernel modules: saa7134 >>> >> >> >>> >> >> Thanks again, >>> >> >> >>> >> >> Pavle. >>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >> >>> >> >> ______________________________________________________________________ >>> >> >> From: hermann pitton <hermann-pitton@arcor.de> >>> >> >> To: Pavle Predic <pavle.predic@yahoo.co.uk> >>> >> >> Cc: video4linux-list@redhat.com >>> >> >> Sent: Sun, 8 November, 2009 23:35:08 >>> >> >> Subject: Re: Leadtek Winfast TV2100 >>> >> >> >>> >> >> Hi Pavle, >>> >> >> >>> >> >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic: >>> >> >> > Did anyone manage to get this card working on Linux? I got the >>> >> >> picture out of the box, but it's impossible to get any sound from the >>> >> >> damned thing. The card is not on CARDLIST.saa7134, but I assume a >>> >> >> similar card/tuner combination can be used. But which? By the way, I >>> >> >> got the speakers connected directly to card output, I'm not even >>> >> >> trying to get it working with my sound card. I can hear clicks when >>> >> >> loading/unloading modules, so it's alive but not set up properly. >>> >> >> > >>> >> >> > Any info would be greatly appreciated. Perhaps someone knows of >>> >> >> another card that is similar to this one? >>> >> >> > >>> >> >> > Card info: >>> >> >> > Chipset: saa7134 >>> >> >> > Tuner: Tvision TVF88T5-B/DFF >>> >> >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7, >>> >> >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68 >>> >> >> >>> >> >> that is not enough information yet. >>> >> >> >>> >> >> The correct tuner for this one is tuner=69. >>> >> >> >>> >> >> Only with this one you will have also radio support. >>> >> >> >>> >> >> Since you mail from an UK mail provider, this tuner is not expected to >>> >> >> work with PAL-I TV stereo sound there, but radio would work. >>> >> >> >>> >> >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for >>> >> >> TV >>> >> >> sound are only found on saa7130 chips, except there is also an extra >>> >> >> TV >>> >> >> mono section directly from the tuner) work for TV sound, most often >>> >> >> an >>> >> >> external audio mux is in the way and needs to be configured correctly >>> >> >> with saa7134 gpio pins. Looking also at the minor chips on the card >>> >> >> with >>> >> >> more than 3 pins can reveal such a mux. >>> >> >> >>> >> >> There is also a software test on such hardware, succeeding in most >>> >> >> cases. >>> >> >> >>> >> >> By default, external analog audio input is looped through to analog >>> >> >> audio out, on which you are listening, if the driver is unloaded. >>> >> >> >>> >> >> On a saa7134 chip, on saa7130 are some known specials, you should hear >>> >> >> the incoming sound directly on your headphones or what else you might >>> >> >> be >>> >> >> using directly connected to your card, trying on LINE1 and LINE2 for >>> >> >> that. >>> >> >> >>> >> >> If not, you can expect that such a mux chip needs to be treated >>> >> >> correctly. >>> >> >> >>> >> >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify >>> >> >> such gpios in use, else you must trace lines and resistors on it. >>> >> >> >>> >> >> In general, an absolute minimum is to provide related "dmesg" after >>> >> >> loading the driver _without_ having tried on other cards previously. >>> >> >> >>> >> >> Please read more on the linuxtv.org wiki about adding support for a >>> >> >> new >>> >> >> card. >>> >> >> >>> >> >> Cheers, >>> >> >> Hermann >>> >> > >>> >> > >> >> >> > [-- Attachment #2: TV2100_with_FM_GPIO.jpg --] [-- Type: image/jpeg, Size: 29516 bytes --] [-- Attachment #3: Type: text/plain, Size: 164 bytes --] -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-23 1:42 ` Terry Wu @ 2009-11-23 2:30 ` hermann pitton 2009-11-26 2:33 ` Terry Wu 0 siblings, 1 reply; 20+ messages in thread From: hermann pitton @ 2009-11-23 2:30 UTC (permalink / raw) To: Terry Wu; +Cc: video4linux-list Hi, thanks again! Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: > Hi, > > Please refer to the attached JPEG file for the GPIO settings of > TV2100 with FM (PCB:B). > > Let me know if you need the information of TV2100 without FM > (PCB:A, TVF8533-BDF). > > Terry Wu On a first look, if we start to count gpios from zero, we tell the same. The TVF8533_BDF I would have to look up. It is four to five years back. If it uses that minor number TI chip without radio support, we treat it as tuner=69 too currently. For all such older can tuners, widely different about the globe, counts, that we don't have any way to detect them. So first working, either NTSC or PAL, sits in the pool position and others have to think twice. OEMs do code tuners into eeprom content, some do not at all, such doing it are in competition and don't follow the rules of the main chip manufacturer, Philips/NXP in that case, and go their own ways. So tuner tables are unstable across manufacturers. We often can't help that much in such cases, but implementing their own tuner eeprom detection into the linux drivers is of course still welcome. Hauppauge does it very successfully since years. We can't do much about it, if OEMs don't follow Philips or whom ever on such. Thanks, Hermann > > 2009/11/23 Terry Wu <terrywu2009@gmail.com>: > > Hi, > > > > The TVF88T5-BDFF data sheet is attached. > > > > Terry Wu > > > > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-23 2:30 ` hermann pitton @ 2009-11-26 2:33 ` Terry Wu 2009-11-28 3:09 ` hermann pitton 0 siblings, 1 reply; 20+ messages in thread From: Terry Wu @ 2009-11-26 2:33 UTC (permalink / raw) To: hermann pitton; +Cc: video4linux-list Hi, Here are the subsystem IDs for different TV2100 models: Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) Terry 2009/11/23 hermann pitton <hermann-pitton@arcor.de>: > Hi, thanks again! > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: >> Hi, >> >> Please refer to the attached JPEG file for the GPIO settings of >> TV2100 with FM (PCB:B). >> >> Let me know if you need the information of TV2100 without FM >> (PCB:A, TVF8533-BDF). >> >> Terry Wu > > On a first look, if we start to count gpios from zero, we tell the same. > > The TVF8533_BDF I would have to look up. It is four to five years back. > > If it uses that minor number TI chip without radio support, we treat it > as tuner=69 too currently. > > For all such older can tuners, widely different about the globe, counts, > that we don't have any way to detect them. So first working, either NTSC > or PAL, sits in the pool position and others have to think twice. > > OEMs do code tuners into eeprom content, some do not at all, such doing > it are in competition and don't follow the rules of the main chip > manufacturer, Philips/NXP in that case, and go their own ways. > > So tuner tables are unstable across manufacturers. > > We often can't help that much in such cases, but implementing their own > tuner eeprom detection into the linux drivers is of course still > welcome. Hauppauge does it very successfully since years. > > We can't do much about it, if OEMs don't follow Philips or whom ever on > such. > > Thanks, > Hermann > > >> >> 2009/11/23 Terry Wu <terrywu2009@gmail.com>: >> > Hi, >> > >> > The TVF88T5-BDFF data sheet is attached. >> > >> > Terry Wu >> > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf >> > > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-26 2:33 ` Terry Wu @ 2009-11-28 3:09 ` hermann pitton 2009-11-28 18:04 ` Pavle Predic 0 siblings, 1 reply; 20+ messages in thread From: hermann pitton @ 2009-11-28 3:09 UTC (permalink / raw) To: Terry Wu; +Cc: video4linux-list Hi Terry Wu, Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: > Hi, > > Here are the subsystem IDs for different TV2100 models: > Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) > Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) > Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) > > Terry better is to become active on it. we can most likely help about how to match such tuners fine, if any doubts left, but the best is to send just patches with having such hardware to test on. Compared to the early tda9887 stuff on LeadTek devices, LeadTek was pioneering and we have that in mind, it should be fairly easy for those. Let's know the other way round too, where you have still concerns doing so. Cheers, Hermann > 2009/11/23 hermann pitton <hermann-pitton@arcor.de>: > > Hi, thanks again! > > > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: > >> Hi, > >> > >> Please refer to the attached JPEG file for the GPIO settings of > >> TV2100 with FM (PCB:B). > >> > >> Let me know if you need the information of TV2100 without FM > >> (PCB:A, TVF8533-BDF). > >> > >> Terry Wu > > > > On a first look, if we start to count gpios from zero, we tell the same. > > > > The TVF8533_BDF I would have to look up. It is four to five years back. > > > > If it uses that minor number TI chip without radio support, we treat it > > as tuner=69 too currently. > > > > For all such older can tuners, widely different about the globe, counts, > > that we don't have any way to detect them. So first working, either NTSC > > or PAL, sits in the pool position and others have to think twice. > > > > OEMs do code tuners into eeprom content, some do not at all, such doing > > it are in competition and don't follow the rules of the main chip > > manufacturer, Philips/NXP in that case, and go their own ways. > > > > So tuner tables are unstable across manufacturers. > > > > We often can't help that much in such cases, but implementing their own > > tuner eeprom detection into the linux drivers is of course still > > welcome. Hauppauge does it very successfully since years. > > > > We can't do much about it, if OEMs don't follow Philips or whom ever on > > such. > > > > Thanks, > > Hermann > > > > > >> > >> 2009/11/23 Terry Wu <terrywu2009@gmail.com>: > >> > Hi, > >> > > >> > The TVF88T5-BDFF data sheet is attached. > >> > > >> > Terry Wu > >> > > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > >> > > > > > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-28 3:09 ` hermann pitton @ 2009-11-28 18:04 ` Pavle Predic 0 siblings, 0 replies; 20+ messages in thread From: Pavle Predic @ 2009-11-28 18:04 UTC (permalink / raw) To: hermann pitton, Terry Wu; +Cc: video4linux-list Hey guys, Let me start by thanking you both for all your help. Unfortunately, there isn't much I can do with the data you provided - it's way too technical for me. I'd be happy to do any tests and apply any patches, but I would need some instructions - but only if you have time; I really don't want to burden you with this. Thanks again, Pavle. ________________________________ From: hermann pitton <hermann-pitton@arcor.de> To: Terry Wu <terrywu2009@gmail.com> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com Sent: Sat, 28 November, 2009 4:09:28 Subject: Re: Re: Leadtek Winfast TV2100 Hi Terry Wu, Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu: > Hi, > > Here are the subsystem IDs for different TV2100 models: > Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK) > Subsystem ID:0x6f32107d, TVF5533-MF (NTSC) > Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM) > > Terry better is to become active on it. we can most likely help about how to match such tuners fine, if any doubts left, but the best is to send just patches with having such hardware to test on. Compared to the early tda9887 stuff on LeadTek devices, LeadTek was pioneering and we have that in mind, it should be fairly easy for those. Let's know the other way round too, where you have still concerns doing so. Cheers, Hermann > 2009/11/23 hermann pitton <hermann-pitton@arcor.de>: > > Hi, thanks again! > > > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu: > >> Hi, > >> > >> Please refer to the attached JPEG file for the GPIO settings of > >> TV2100 with FM (PCB:B). > >> > >> Let me know if you need the information of TV2100 without FM > >> (PCB:A, TVF8533-BDF). > >> > >> Terry Wu > > > > On a first look, if we start to count gpios from zero, we tell the same. > > > > The TVF8533_BDF I would have to look up. It is four to five years back. > > > > If it uses that minor number TI chip without radio support, we treat it > > as tuner=69 too currently. > > > > For all such older can tuners, widely different about the globe, counts, > > that we don't have any way to detect them. So first working, either NTSC > > or PAL, sits in the pool position and others have to think twice. > > > > OEMs do code tuners into eeprom content, some do not at all, such doing > > it are in competition and don't follow the rules of the main chip > > manufacturer, Philips/NXP in that case, and go their own ways. > > > > So tuner tables are unstable across manufacturers. > > > > We often can't help that much in such cases, but implementing their own > > tuner eeprom detection into the linux drivers is of course still > > welcome. Hauppauge does it very successfully since years. > > > > We can't do much about it, if OEMs don't follow Philips or whom ever on > > such. > > > > Thanks, > > Hermann > > > > > >> > >> 2009/11/23 Terry Wu <terrywu2009@gmail.com>: > >> > Hi, > >> > > >> > The TVF88T5-BDFF data sheet is attached. > >> > > >> > Terry Wu > >> > > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > >> > > > > > > > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Re: Leadtek Winfast TV2100 2009-11-23 1:23 ` Terry Wu 2009-11-23 1:42 ` Terry Wu @ 2009-11-23 1:47 ` hermann pitton 1 sibling, 0 replies; 20+ messages in thread From: hermann pitton @ 2009-11-23 1:47 UTC (permalink / raw) To: Terry Wu; +Cc: video4linux-list [-- Attachment #1: Type: text/plain, Size: 27451 bytes --] Hi, thanks! Here is the TI PLL datasheet we walked along. Let's see, if we missed something. Cheers, Hermann Am Montag, den 23.11.2009, 09:23 +0800 schrieb Terry Wu: > Hi, > > The TVF88T5-BDFF data sheet is attached. > > Terry Wu > > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf > > > 2009/11/23 hermann pitton <hermann-pitton@arcor.de>: > > Hi, > > > > Am Sonntag, den 22.11.2009, 20:51 +0800 schrieb Terry Wu: > >> Hi, > >> > >> I will give you the tuner data sheet and schematic of GPIO tomorrow. > >> Stay tuned. > >> > >> Terry > > > > that is of course very welcome. > > > > We know that the PLL chip is TI sn761677, datasheet is publicly > > available, radio switch is 0x11 and inside is a TENA tuner PCB also > > known from other tuners. > > > > For the gpio configuration hopefully my assumptions should not be that > > wrong. > > > > Pavle, are you able to test such yourself or should I provide some > > patches? > > > > Cheers, > > Hermann > > > >> 2009/11/22 <hermann-pitton@arcor.de>: > >> > Hi, > >> > > >> > sorry, posting from a webmail interface. > >> > > >> > Might get bounced from the list. > >> > > >> > ----- Original Nachricht ---- > >> > Von: Pavle Predic <pavle.predic@yahoo.co.uk> > >> > An: Terry Wu <terrywu2009@gmail.com>, hermann pitton <hermann-pitton@arcor.de> > >> > Datum: 21.11.2009 20:53 > >> > Betreff: Re: Leadtek Winfast TV2100 > >> > > >> >> Hey Terry, > >> >> > >> >> Thanks for your input. Yes it would seem that my tuner is not supported > >> >> (it's a YMEC Tvision TVF88T5-B/DFF), and neither is my board. But I was > >> >> hoping that an existing board/tuner combination might do the job. > >> >> > >> >> @Hermann - I tried card IDs 1-150 with tuner=69 and - alas - didn't get > >> >> sound. Interestingly enough, almost all card ids produce a picture with this > >> >> tuner. Also, I noticed that with some board IDs I'm getting clicks when > >> >> muting/unmuting or switching channels, but no broadcast sound > >> >> whatsoever...:( > >> > > >> > Tuner=69 covers a lot of tuners with TexasInstruments pll chip, NTSC and PAL. > >> > I looked up this tuner from your previous mail and 69 is correct. You will note this when it comes to radio, UHF frequencies and takeover frequencies. > >> > > >> >> I also tried running regspy.exe (after booting to Windows) and performed the > >> >> test as described on dscaler site. But the results are way to cryptic for > >> >> me...I have no clue how to use this. So I'll paste it here, and maybe > >> >> someone will be able to draw a conclusion: > >> >> > >> > Ah, good. > >> > > >> >> SAA7130 Card [0]: > >> >> > >> >> Vendor ID: 0x1131 > >> >> Device ID: 0x7130 > >> >> Subsystem ID: 0x6f3a107d > >> >> > >> >> > >> >> 7 states dumped > >> >> > >> >> ---------------------------------------------------------------------------- > >> >> ------ > >> >> > >> >> SAA7130 Card - State 0: > >> >> SAA7134_GPIO_GPMODE: 80000009 * (10000000 00000000 00000000 > >> >> 00001001) > >> >> SAA7134_GPIO_GPSTATUS: 0606200c * (00000110 00000110 00100000 > >> >> 00001100) > >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> >> > >> >> SAA7134_ANALOG_IO_SELECT: 3b * (00111011) > >> >> > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> > >> >> Changes: State 0 -> State 1: > >> >> SAA7134_GPIO_GPMODE: 80000009 -> 8000000d (-------- -------- > >> >> -------- -----0--) > >> >> SAA7134_GPIO_GPSTATUS: 0606200c -> 00062000 (-----11- -------- > >> >> -------- ----11--) > >> >> SAA7134_ANALOG_IO_SELECT: 3b -> 00 (--111-11) > >> >> > >> >> > >> >> 3 changes > >> >> > >> >> > >> >> ---------------------------------------------------------------------------- > >> >> ------ > >> >> > >> >> SAA7130 Card - State 1: > >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> >> 00001101) (was: 80000009) > >> >> SAA7134_GPIO_GPSTATUS: 00062000 * (00000000 00000110 00100000 > >> >> 00000000) (was: 0606200c) > >> >> SAA7134_ANALOG_IN_CTRL1: c1 * (11000001) > >> >> > >> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) > >> >> (was: 3b) > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> > >> >> Changes: State 1 -> State 2: > >> >> SAA7134_GPIO_GPSTATUS: 00062000 -> 00062008 (-------- -------- > >> >> -------- ----0---) > >> >> SAA7134_ANALOG_IN_CTRL1: c1 -> 83 (-1----0-) > >> >> > >> >> SAA7134_ANALOG_IO_SELECT: 00 -> 09 (----0--0) > >> >> > >> >> > >> >> 3 changes > >> >> > >> >> > >> >> ---------------------------------------------------------------------------- > >> >> ------ > >> >> > >> >> SAA7130 Card - State 2: > >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> >> 00001101) > >> >> SAA7134_GPIO_GPSTATUS: 00062008 (00000000 00000110 00100000 > >> >> 00001000) (was: 00062000) > >> >> SAA7134_ANALOG_IN_CTRL1: 83 * (10000011) > >> >> (was: c1) > >> >> SAA7134_ANALOG_IO_SELECT: 09 (00001001) > >> >> (was: 00) > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> > >> >> Changes: State 2 -> State 3: > >> >> SAA7134_ANALOG_IN_CTRL1: 83 -> c8 (-0--0-11) > >> >> > >> >> > >> >> 1 changes > >> >> > >> >> > >> >> ---------------------------------------------------------------------------- > >> >> ------ > >> >> > >> >> SAA7130 Card - State 3: > >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> >> 00001101) > >> >> SAA7134_GPIO_GPSTATUS: 00062008 * (00000000 00000110 00100000 > >> >> 00001000) > >> >> SAA7134_ANALOG_IN_CTRL1: c8 * (11001000) > >> >> (was: 83) > >> >> SAA7134_ANALOG_IO_SELECT: 09 * (00001001) > >> >> > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> > >> >> Changes: State 3 -> State 4: > >> >> SAA7134_GPIO_GPSTATUS: 00062008 -> 04062004 (-----0-- -------- > >> >> -------- ----10--) > >> >> SAA7134_ANALOG_IN_CTRL1: c8 -> c1 (----1--0) > >> >> (same as 0, 1) > >> >> SAA7134_ANALOG_IO_SELECT: 09 -> 00 (----1--1) > >> >> (same as 1) > >> >> > >> >> 3 changes > >> >> > >> >> > >> >> ---------------------------------------------------------------------------- > >> >> ------ > >> >> > >> >> SAA7130 Card - State 4: > >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> >> 00001101) > >> >> SAA7134_GPIO_GPSTATUS: 04062004 * (00000100 00000110 00100000 > >> >> 00000100) (was: 00062008) > >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> >> (was: c8) > >> >> SAA7134_ANALOG_IO_SELECT: 00 (00000000) > >> >> (was: 09) > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> > >> >> Changes: State 4 -> State 5: > >> >> SAA7134_GPIO_GPSTATUS: 04062004 -> 02062000 (-----10- -------- > >> >> -------- -----1--) > >> >> > >> >> 1 changes > >> >> > >> >> > >> >> ---------------------------------------------------------------------------- > >> >> ------ > >> >> > >> >> SAA7130 Card - State 5: > >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> >> 00001101) > >> >> SAA7134_GPIO_GPSTATUS: 02062000 * (00000010 00000110 00100000 > >> >> 00000000) (was: 04062004) > >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> >> > >> >> SAA7134_ANALOG_IO_SELECT: 00 * (00000000) > >> >> > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> > >> >> Changes: State 5 -> Register Dump: > >> >> SAA7134_GPIO_GPSTATUS: 02062000 -> 06062008 (-----0-- -------- > >> >> -------- ----0---) > >> >> SAA7134_ANALOG_IO_SELECT: 00 -> 02 (------0-) > >> >> > >> >> > >> >> 2 changes > >> >> > >> >> > >> >> ============================================================================ > >> >> ===== > >> >> > >> >> SAA7130 Card - Register Dump: > >> >> SAA7134_GPIO_GPMODE: 8000000d (10000000 00000000 00000000 > >> >> 00001101) > >> >> SAA7134_GPIO_GPSTATUS: 06062008 (00000110 00000110 00100000 > >> >> 00001000) (was: 02062000) > >> >> SAA7134_ANALOG_IN_CTRL1: c1 (11000001) > >> >> > >> >> SAA7134_ANALOG_IO_SELECT: 02 (00000010) > >> >> (was: 00) > >> >> SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 > >> >> 00000000) > >> >> SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) > >> >> > >> >> SAA7134_I2S_OUTPUT_FORMAT: 01 (00000001) > >> >> > >> >> SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) > >> >> > >> >> SAA7134_I2S_AUDIO_OUTPUT: 01 (00000001) > >> >> > >> >> SAA7134_TS_PARALLEL: 04 (00000100) > >> >> > >> >> SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL0: 00 (00000000) > >> >> > >> >> SAA7134_TS_SERIAL1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA0: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA1: 00 (00000000) > >> >> > >> >> SAA7134_TS_DMA2: 00 (00000000) > >> >> > >> >> SAA7134_SPECIAL_MODE: 01 (00000001) > >> >> > >> >> > >> >> end of dump > >> >> > >> >> Here is the order in which I performed the test:State 6 > >> >> State 0 - viewing software off > >> >> State 1 - tuner mode > >> >> State 2 - composite mode > >> >> State 3 - s video mode > >> >> State 4 - radio mode > >> >> State 5 - tuner mode (again) > >> >> Final dump - viewing software off (again) > >> >> > >> >> Thanks to everyone for your help. > >> >> > >> >> Pavle. > >> >> > >> > > >> > Better don't top post. Becomes hard to read after a while. > >> > > >> > You would try wsith a gpio_mask = 0x0d. > >> > > >> > .gpio for TV is 0x00000000 (default, don't even need to set it). > >> > > >> > For s-video and composite 0x08. > >> > > >> > For radio 0x04. > >> > > >> > On saa7130 chips mono audio from tuner in most cases is connected to LINE2. > >> > > >> > Then also radio is on LINE2 and s-video and composite on LINE1. > >> > > >> > For .mute it seems to switch to s-video/composite LINE input and keeps that input open with .gpio 0x08. > >> > > >> > Maybe Terry knows better. > >> > > >> > Good luck for testing. > >> > > >> > Cheers, > >> > Hermann > >> > > >> >> > >> >> ________________________________ > >> >> From: Terry Wu <terrywu2009@gmail.com> > >> >> To: hermann pitton <hermann-pitton@arcor.de> > >> >> Cc: Pavle Predic <pavle.predic@yahoo.co.uk>; video4linux-list@redhat.com > >> >> Sent: Sat, 21 November, 2009 10:07:05 > >> >> Subject: Re: Leadtek Winfast TV2100 > >> >> > >> >> Hi, > >> >> > >> >> There are many models of TV2100. > >> >> Different model uses different TV tuner. > >> >> > >> >> The tuner 69 is TUNER_TNF_5335MF. > >> >> Make sure the tuner in your TV2100 card is the TNF_5335MF. > >> >> > >> >> Maybe the tuner in your TV2100 card is not supported by current > >> >> v4l-dvb driver yet (linux\include\media\tuner.h). > >> >> > >> >> > >> >> Terry > >> >> > >> >> 2009/11/21 hermann pitton <hermann-pitton@arcor.de>: > >> >> > Hi Pavle, > >> >> > > >> >> > Am Freitag, den 20.11.2009, 14:11 +0000 schrieb Pavle Predic: > >> >> >> Hi Hermann, > >> >> >> > >> >> >> Thank you so much for your help. I didn't really get most of what you > >> >> >> said (way to technical for me), but at least I know now which tuner I > >> >> >> should use, so I'll keep testing with tuner 69 and see if I get > >> >> >> results. > >> >> > > >> >> > that one should be right, especially for analog radio. > >> >> > > >> >> >> BTW, I'm not from UK - I'm from Serbia and I'm trying to make the card > >> >> >> work for my cable tv which uses PAL BG (at least so they say). > >> >> > > >> >> > Lots of people are on the move these days, therefore it is important to > >> >> > know too, what they might carry with them. That tuner should be fine > >> >> > then. > >> >> > > >> >> >> I'll report back after testing on tuner 69 (I'll simply try all card > >> >> >> ids with this tuner id). In the meantime here's some more info: > >> >> > > >> >> > Better is to follow the advice how you can narrow down such stuff. > >> >> > > >> >> > As far I know, we have not destroyed a single device yet on the saa7134 > >> >> > driver, but to go over all possibilities, concerning voltage and gpios, > >> >> > has some risks and is not the shortest way to come closer. > >> >> > > >> >> > Thanks for your input. > >> >> > > >> >> > Cheers, > >> >> > Hermann > >> >> > > >> >> >> dmesg: > >> >> >> > >> >> >> [ 9.829338] saa7130/34: v4l2 driver version 0.2.15 loaded > >> >> >> [ 9.829408] saa7134 0000:00:08.0: PCI INT A -> GSI 17 (level, low) > >> >> >> -> IRQ 17 > >> >> >> [ 9.829419] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 17, > >> >> >> latency: 64, mmio: 0xfdffe000 > >> >> >> [ 9.829428] saa7130[0]: subsystem: 107d:6f3a, board: > >> >> >> UNKNOWN/GENERIC [card=0,autodetected] > >> >> >> [ 9.829458] saa7130[0]: board init: gpio is 6200c > >> >> >> [ 9.829465] IRQ 17/saa7130[0]: IRQF_DISABLED is not guaranteed on > >> >> >> shared IRQs > >> >> >> [ 9.980513] saa7130[0]: i2c eeprom 00: 7d 10 3a 6f 54 20 1c 00 43 > >> >> >> 43 a9 1c 55 d2 b2 92 > >> >> >> [ 9.980532] saa7130[0]: i2c eeprom 10: 0c ff 82 0e ff 20 ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980547] saa7130[0]: i2c eeprom 20: 01 40 02 03 03 02 01 03 08 > >> >> >> ff 00 8c ff ff ff ff > >> >> >> [ 9.980562] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980578] saa7130[0]: i2c eeprom 40: 50 89 00 c2 00 00 02 30 02 > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980593] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980608] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980623] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980639] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980654] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980670] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980685] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980701] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980716] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980731] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980747] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > >> >> >> ff ff ff ff ff ff ff > >> >> >> [ 9.980876] saa7130[0]: registered device video0 [v4l2] > >> >> >> [ 9.980908] saa7130[0]: registered device vbi0 > >> >> >> > >> >> >> > >> >> >> lsmod: > >> >> >> > >> >> >> saa7134 135552 0 > >> >> >> ir_common 47172 1 saa7134 > >> >> >> v4l2_common 14308 1 saa7134 > >> >> >> videodev 31040 2 saa7134,v4l2_common > >> >> >> videobuf_dma_sg 11340 1 saa7134 > >> >> >> videobuf_core 16164 2 saa7134,videobuf_dma_sg > >> >> >> tveeprom 10720 1 saa7134 > >> >> >> i2c_core 20844 4 > >> >> >> i2c_viapro,saa7134,v4l2_common,tveeprom > >> >> >> > >> >> >> lspci: > >> >> >> > >> >> >> 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 > >> >> >> Video Broadcast Decoder [1131:7130] (rev 01) > >> >> >> Subsystem: LeadTek Research Inc. Device [107d:6f3a] > >> >> >> Flags: bus master, medium devsel, latency 64, IRQ 17 > >> >> >> Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] > >> >> >> Capabilities: [40] Power Management version 1 > >> >> >> Kernel driver in use: saa7134 > >> >> >> Kernel modules: saa7134 > >> >> >> > >> >> >> Thanks again, > >> >> >> > >> >> >> Pavle. > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> >> ______________________________________________________________________ > >> >> >> From: hermann pitton <hermann-pitton@arcor.de> > >> >> >> To: Pavle Predic <pavle.predic@yahoo.co.uk> > >> >> >> Cc: video4linux-list@redhat.com > >> >> >> Sent: Sun, 8 November, 2009 23:35:08 > >> >> >> Subject: Re: Leadtek Winfast TV2100 > >> >> >> > >> >> >> Hi Pavle, > >> >> >> > >> >> >> Am Sonntag, den 08.11.2009, 17:11 +0000 schrieb Pavle Predic: > >> >> >> > Did anyone manage to get this card working on Linux? I got the > >> >> >> picture out of the box, but it's impossible to get any sound from the > >> >> >> damned thing. The card is not on CARDLIST.saa7134, but I assume a > >> >> >> similar card/tuner combination can be used. But which? By the way, I > >> >> >> got the speakers connected directly to card output, I'm not even > >> >> >> trying to get it working with my sound card. I can hear clicks when > >> >> >> loading/unloading modules, so it's alive but not set up properly. > >> >> >> > > >> >> >> > Any info would be greatly appreciated. Perhaps someone knows of > >> >> >> another card that is similar to this one? > >> >> >> > > >> >> >> > Card info: > >> >> >> > Chipset: saa7134 > >> >> >> > Tuner: Tvision TVF88T5-B/DFF > >> >> >> > Card numbers that produce picture (modprobe saa7134 card=$n): 3, 7, > >> >> >> 10, 16, 34, 35, 45, 46, 47, 48, 51, 63, 64, 68 > >> >> >> > >> >> >> that is not enough information yet. > >> >> >> > >> >> >> The correct tuner for this one is tuner=69. > >> >> >> > >> >> >> Only with this one you will have also radio support. > >> >> >> > >> >> >> Since you mail from an UK mail provider, this tuner is not expected to > >> >> >> work with PAL-I TV stereo sound there, but radio would work. > >> >> >> > >> >> >> Else, if neither amux = TV nor amux = LINE1 or LINE2 (LINE inputs for > >> >> >> TV > >> >> >> sound are only found on saa7130 chips, except there is also an extra > >> >> >> TV > >> >> >> mono section directly from the tuner) work for TV sound, most often > >> >> >> an > >> >> >> external audio mux is in the way and needs to be configured correctly > >> >> >> with saa7134 gpio pins. Looking also at the minor chips on the card > >> >> >> with > >> >> >> more than 3 pins can reveal such a mux. > >> >> >> > >> >> >> There is also a software test on such hardware, succeeding in most > >> >> >> cases. > >> >> >> > >> >> >> By default, external analog audio input is looped through to analog > >> >> >> audio out, on which you are listening, if the driver is unloaded. > >> >> >> > >> >> >> On a saa7134 chip, on saa7130 are some known specials, you should hear > >> >> >> the incoming sound directly on your headphones or what else you might > >> >> >> be > >> >> >> using directly connected to your card, trying on LINE1 and LINE2 for > >> >> >> that. > >> >> >> > >> >> >> If not, you can expect that such a mux chip needs to be treated > >> >> >> correctly. > >> >> >> > >> >> >> The DScaler (deinterlace.sf.net) regspy.exe often can help to identify > >> >> >> such gpios in use, else you must trace lines and resistors on it. > >> >> >> > >> >> >> In general, an absolute minimum is to provide related "dmesg" after > >> >> >> loading the driver _without_ having tried on other cards previously. > >> >> >> > >> >> >> Please read more on the linuxtv.org wiki about adding support for a > >> >> >> new > >> >> >> card. > >> >> >> > >> >> >> Cheers, > >> >> >> Hermann > >> >> > > >> >> > > > > > > > [-- Attachment #2: sn761677.pdf --] [-- Type: application/pdf, Size: 202723 bytes --] [-- Attachment #3: Type: text/plain, Size: 164 bytes --] -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2010-01-11 13:54 UTC | newest] Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-01-03 15:37 Re: Leadtek Winfast TV2100 dz-tor 2010-01-08 19:34 ` hermann pitton 2010-01-08 20:24 ` Blackmagic SDI card --> v4l2 ready ? Mars Forest 2010-01-08 20:32 ` Mars Forest 2010-01-11 13:57 ` Rafael Diniz 2010-01-08 22:56 ` Leadtek Winfast TV2100 dz-tor 2010-01-09 14:46 ` Pavle Predic 2010-01-09 16:23 ` dz-tor 2010-01-09 17:14 ` hermann pitton 2010-01-09 22:48 ` hermann pitton 2010-01-10 21:26 ` dz-tor -- strict thread matches above, loose matches on Subject: below -- 2009-11-21 22:33 Aw: " hermann-pitton 2009-11-22 12:51 ` Terry Wu 2009-11-22 22:30 ` hermann pitton 2009-11-23 1:23 ` Terry Wu 2009-11-23 1:42 ` Terry Wu 2009-11-23 2:30 ` hermann pitton 2009-11-26 2:33 ` Terry Wu 2009-11-28 3:09 ` hermann pitton 2009-11-28 18:04 ` Pavle Predic 2009-11-23 1:47 ` hermann pitton
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.
![[-- Attachment #2: TV2100_with_FM_GPIO.jpg --] [-- Type: image/jpeg, Size: 29516 bytes --]](../../6ab2c27e0911221742g739380d1m10b517d25f451898@mail.gmail.com/2-TV2100_with_FM_GPIO.jpg){kind=link}