From: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org> To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org, rpurdie@rpsys Cc: dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org, Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>, akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org, alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org Subject: [PATCH v5 11/12] davinci: add tnetv107x evm backlight device Date: Mon, 15 Nov 2010 14:12:13 -0500 [thread overview] Message-ID: <1289848334-8695-12-git-send-email-cyril@ti.com> (raw) In-Reply-To: <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> The tnetv107x evm board has a backlight device that is connected on one of the SSP ports. This patch adds the board definitions necessary to plug the backlight driver to the GPIO corresponding to this SSP pin. Signed-off-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org> --- arch/arm/mach-davinci/board-tnetv107x-evm.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index e3863dd..945a958 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -44,6 +44,7 @@ #define EVM_MMC_WP_GPIO 21 #define EVM_MMC_CD_GPIO 24 #define EVM_SPI_CS_GPIO 54 +#define EVM_BACKLIGHT_GPIO (SSP_GPIO_START + 2) static int initialize_gpio(int gpio, char *desc) { @@ -353,6 +354,12 @@ static struct spi_board_info spi_info[] __initconst = { }, }; +static struct platform_device backlight_device = { + .name = "tps6116x", + .id = -1, + .dev.platform_data = (void *)EVM_BACKLIGHT_GPIO, +}; + static __init void tnetv107x_evm_board_init(void) { davinci_cfg_reg_list(sdio1_pins); @@ -361,6 +368,8 @@ static __init void tnetv107x_evm_board_init(void) tnetv107x_devices_init(&evm_device_info); + platform_device_register(&backlight_device); + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); } -- 1.7.1 ------------------------------------------------------------------------------ Centralized Desktop Delivery: Dell and VMware Reference Architecture Simplifying enterprise desktop deployment and management using Dell EqualLogic storage and VMware View: A highly scalable, end-to-end client virtualization framework. Read more! http://p.sf.net/sfu/dell-eql-dev2dev
WARNING: multiple messages have this Message-ID (diff)
From: cyril@ti.com (Cyril Chemparathy) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 11/12] davinci: add tnetv107x evm backlight device Date: Mon, 15 Nov 2010 14:12:13 -0500 [thread overview] Message-ID: <1289848334-8695-12-git-send-email-cyril@ti.com> (raw) In-Reply-To: <1289848334-8695-1-git-send-email-cyril@ti.com> The tnetv107x evm board has a backlight device that is connected on one of the SSP ports. This patch adds the board definitions necessary to plug the backlight driver to the GPIO corresponding to this SSP pin. Signed-off-by: Cyril Chemparathy <cyril@ti.com> --- arch/arm/mach-davinci/board-tnetv107x-evm.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index e3863dd..945a958 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -44,6 +44,7 @@ #define EVM_MMC_WP_GPIO 21 #define EVM_MMC_CD_GPIO 24 #define EVM_SPI_CS_GPIO 54 +#define EVM_BACKLIGHT_GPIO (SSP_GPIO_START + 2) static int initialize_gpio(int gpio, char *desc) { @@ -353,6 +354,12 @@ static struct spi_board_info spi_info[] __initconst = { }, }; +static struct platform_device backlight_device = { + .name = "tps6116x", + .id = -1, + .dev.platform_data = (void *)EVM_BACKLIGHT_GPIO, +}; + static __init void tnetv107x_evm_board_init(void) { davinci_cfg_reg_list(sdio1_pins); @@ -361,6 +368,8 @@ static __init void tnetv107x_evm_board_init(void) tnetv107x_devices_init(&evm_device_info); + platform_device_register(&backlight_device); + spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); } -- 1.7.1
next prev parent reply other threads:[~2010-11-15 19:12 UTC|newest] Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-11-15 19:12 [PATCH v5 00/12] tnetv107x ssp drivers Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [not found] ` <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-15 19:12 ` [PATCH v5 01/12] misc: add driver for sequencer serial port Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [not found] ` <1289848334-8695-2-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-16 7:10 ` Grant Likely 2010-11-16 7:10 ` Grant Likely [not found] ` <20101116071047.GE4074-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-16 16:15 ` Cyril Chemparathy 2010-11-16 16:15 ` Cyril Chemparathy [not found] ` <4CE2AE3C.4040805-l0cyMroinI0@public.gmane.org> 2010-11-16 20:35 ` Grant Likely 2010-11-16 20:35 ` Grant Likely [not found] ` <AANLkTik76EY8Xh01YP2Tep6k1ETPO+3idmNuk3pVikJG-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-11-16 21:19 ` Cyril Chemparathy 2010-11-16 21:19 ` Cyril Chemparathy 2010-11-16 22:23 ` Russell King - ARM Linux 2010-11-16 22:23 ` Russell King - ARM Linux [not found] ` <20101116222340.GF21926-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org> 2010-11-16 23:57 ` Grant Likely 2010-11-16 23:57 ` Grant Likely 2010-11-15 19:12 ` [PATCH v5 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 21:59 ` Ryan Mallon 2010-11-15 21:59 ` Ryan Mallon [not found] ` <1289848334-8695-5-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-16 7:22 ` Grant Likely 2010-11-16 7:22 ` Grant Likely [not found] ` <20101116072225.GF4074-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-16 7:47 ` Grant Likely 2010-11-16 7:47 ` Grant Likely 2010-11-16 11:34 ` Mark Brown 2010-11-16 11:34 ` Mark Brown [not found] ` <20101116113409.GH3338-GFdadSzt00ze9xe1eoZjHA@public.gmane.org> 2010-11-16 20:45 ` Grant Likely 2010-11-16 20:45 ` Grant Likely [not found] ` <20101116204554.GB5016-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-16 22:48 ` Mark Brown 2010-11-16 22:48 ` Mark Brown [not found] ` <AANLkTi=utWumLKo9QVWXpkC8WxpgaNJJs+dj=pa2eq-q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-11-17 0:17 ` Cyril Chemparathy 2010-11-17 0:17 ` Cyril Chemparathy 2010-11-17 13:31 ` Mark Brown 2010-11-17 13:31 ` Mark Brown [not found] ` <20101117133136.GA19488-HF5t3jzXg/6ND3a5+9QAFujbO/Zr0HzV@public.gmane.org> 2010-11-17 15:25 ` David Brownell 2010-11-17 15:25 ` David Brownell [not found] ` <781931.83221.qm-g47maUHHHF+ORdMXk8NaZPu2YVrzzGjVVpNB7YpNyf8@public.gmane.org> 2010-11-17 17:54 ` Cyril Chemparathy 2010-11-17 17:54 ` Cyril Chemparathy [not found] ` <4CE31F0E.7050103-l0cyMroinI0@public.gmane.org> 2010-11-17 16:11 ` Grant Likely 2010-11-17 16:11 ` Grant Likely [not found] ` <20101117161130.GC5757-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-17 17:23 ` Mark Brown 2010-11-17 17:23 ` Mark Brown 2010-11-17 17:35 ` Cyril Chemparathy 2010-11-17 17:35 ` Cyril Chemparathy 2010-11-18 5:46 ` Greg KH 2010-11-18 5:46 ` Greg KH 2010-11-25 23:32 ` Rafael J. Wysocki 2010-11-25 23:32 ` Rafael J. Wysocki 2010-11-16 14:19 ` David Brownell 2010-11-16 14:19 ` David Brownell 2010-11-15 19:12 ` [PATCH v5 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 07/12] davinci: add tnetv107x evm regulators Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 08/12] gpio: add ti-ssp gpio driver Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [not found] ` <1289848334-8695-9-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-15 22:38 ` Ryan Mallon 2010-11-15 22:38 ` Ryan Mallon [not found] ` <4CE1B651.1060006-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org> 2010-11-16 19:38 ` Cyril Chemparathy 2010-11-16 19:38 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 10/12] backlight: add support for tps6116x controller Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [this message] 2010-11-15 19:12 ` [PATCH v5 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1289848334-8695-12-git-send-email-cyril@ti.com \ --to=cyril-l0cymroini0@public.gmane.org \ --cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \ --cc=alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org \ --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \ --cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \ --cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ --cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \ --cc=lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \ --cc=rpurdie@rpsys \ --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \ --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.