From: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org> To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org, rpurdie@rpsys Cc: dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org, Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>, akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org, alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org Subject: [PATCH v5 08/12] gpio: add ti-ssp gpio driver Date: Mon, 15 Nov 2010 14:12:10 -0500 [thread overview] Message-ID: <1289848334-8695-9-git-send-email-cyril@ti.com> (raw) In-Reply-To: <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> TI's SSP controller pins can be directly read and written to behave like a GPIO. This patch adds a GPIO driver that exposes such functionality. Signed-off-by: Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org> --- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/ti-ssp-gpio.c | 205 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/ti_ssp.h | 4 + 4 files changed, 220 insertions(+), 0 deletions(-) create mode 100644 drivers/mfd/ti-ssp-gpio.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7dcc03a..b193580 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -102,6 +102,16 @@ config MFD_TI_SSP_SPI To compile this driver as a module, choose M here: the module will be called ti-ssp-spi. +config MFD_TI_SSP_GPIO + tristate "TI Sequencer Serial Port - GPIO Support" + depends on GPIOLIB && MFD_TI_SSP + help + Say yes here to support a GPIO interface on TI SSP port pins. + Each SSP port translates into 4 GPIOs. + + This driver can also be built as a module. If so, the module + will be called ti-ssp-gpio. + config HTC_EGPIO bool "HTC EGPIO support" depends on GENERIC_HARDIRQS && GPIOLIB && ARM diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ba97f48..87b5de8 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o obj-$(CONFIG_MFD_TI_SSP_SPI) += ti-ssp-spi.o +obj-$(CONFIG_MFD_TI_SSP_GPIO) += ti-ssp-gpio.o obj-$(CONFIG_MFD_STMPE) += stmpe.o obj-$(CONFIG_MFD_TC35892) += tc35892.o diff --git a/drivers/mfd/ti-ssp-gpio.c b/drivers/mfd/ti-ssp-gpio.c new file mode 100644 index 0000000..a3e909b --- /dev/null +++ b/drivers/mfd/ti-ssp-gpio.c @@ -0,0 +1,205 @@ +/* + * Sequencer Serial Port (SSP) based virtual GPIO driver + * + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mfd/ti_ssp.h> + +struct ti_ssp_gpio { + struct gpio_chip chip; +#define chip2gpio(chip) container_of(chip, struct ti_ssp_gpio, chip) + struct device *dev; + spinlock_t lock; + u8 out; + u32 iosel; +}; + +static int direction_in(struct gpio_chip *chip, unsigned gpio_num) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + int error = 0; + + spin_lock(&gpio->lock); + + gpio->iosel &= ~SSP_PIN_MASK(gpio_num); + gpio->iosel |= SSP_PIN_SEL(gpio_num, SSP_IN); + + error = ti_ssp_set_iosel(gpio->dev, gpio->iosel); + + spin_unlock(&gpio->lock); + + return error; +} + +static int direction_out(struct gpio_chip *chip, unsigned gpio_num, int val) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + int error; + + spin_lock(&gpio->lock); + + gpio->iosel &= ~SSP_PIN_MASK(gpio_num); + gpio->iosel |= SSP_PIN_SEL(gpio_num, SSP_OUT); + + error = ti_ssp_set_iosel(gpio->dev, gpio->iosel); + + if (error < 0) + goto error; + + if (val) + gpio->out |= BIT(gpio_num); + else + gpio->out &= ~BIT(gpio_num); + + error = ti_ssp_raw_write(gpio->dev, gpio->out); + +error: + spin_unlock(&gpio->lock); + return error; +} + +static int value_get(struct gpio_chip *chip, unsigned gpio_num) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + int ret; + + spin_lock(&gpio->lock); + + ret = ti_ssp_raw_read(gpio->dev); + if (ret >= 0) + ret = (ret & BIT(gpio_num)) ? 1 : 0; + + spin_unlock(&gpio->lock); + return ret; +} + +static void value_set(struct gpio_chip *chip, unsigned gpio_num, int val) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + + spin_lock(&gpio->lock); + + if (val) + gpio->out |= BIT(gpio_num); + else + gpio->out &= ~BIT(gpio_num); + + ti_ssp_raw_write(gpio->dev, gpio->out); + + spin_unlock(&gpio->lock); +} + +static int __devinit ti_ssp_gpio_probe(struct platform_device *pdev) +{ + const struct ti_ssp_gpio_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct ti_ssp_gpio *gpio; + int error; + + if (!pdata) { + dev_err(dev, "platform data not found\n"); + return -EINVAL; + } + + gpio = kzalloc(sizeof(*gpio), GFP_KERNEL); + if (!gpio) { + dev_err(dev, "cannot allocate driver data\n"); + return -ENOMEM; + } + + gpio->dev = dev; + gpio->iosel = SSP_PIN_SEL(0, SSP_IN) | SSP_PIN_SEL(1, SSP_IN) | + SSP_PIN_SEL(2, SSP_IN) | SSP_PIN_SEL(3, SSP_IN); + error = ti_ssp_set_iosel(gpio->dev, gpio->iosel); + if (error < 0) { + dev_err(dev, "gpio io setup failed (%d)\n", error); + goto error; + } + + spin_lock_init(&gpio->lock); + platform_set_drvdata(pdev, gpio); + + gpio->chip.base = pdata->start; + gpio->chip.ngpio = 4; + gpio->chip.dev = &pdev->dev; + gpio->chip.label = "ti_ssp_gpio"; + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = value_get; + gpio->chip.set = value_set; + gpio->chip.direction_input = direction_in; + gpio->chip.direction_output = direction_out; + + error = gpiochip_add(&gpio->chip); + if (error < 0) { + dev_err(dev, "gpio chip registration failed (%d)\n", error); + goto error; + } + + dev_info(dev, "ssp gpio interface registered\n"); + return 0; + +error: + kfree(gpio); + return error; +} + +static int __devexit ti_ssp_gpio_remove(struct platform_device *pdev) +{ + struct ti_ssp_gpio *gpio = platform_get_drvdata(pdev); + int error; + + error = gpiochip_remove(&gpio->chip); + if (error < 0) + return error; + kfree(gpio); + return 0; +} + +static struct platform_driver ti_ssp_gpio_driver = { + .probe = ti_ssp_gpio_probe, + .remove = __devexit_p(ti_ssp_gpio_remove), + .driver = { + .name = "ti-ssp-gpio", + .owner = THIS_MODULE, + }, +}; + +static int __init ti_ssp_gpio_init(void) +{ + return platform_driver_register(&ti_ssp_gpio_driver); +} +subsys_initcall(ti_ssp_gpio_init); + +static void __exit ti_ssp_gpio_exit(void) +{ + platform_driver_unregister(&ti_ssp_gpio_driver); +} +module_exit(ti_ssp_gpio_exit); + +MODULE_DESCRIPTION("GPIO interface for TI-SSP"); +MODULE_AUTHOR("Cyril Chemparathy <cyril-l0cyMroinI0@public.gmane.org>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ti-ssp-gpio"); diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h index dbb4b43..10c65bb 100644 --- a/include/linux/mfd/ti_ssp.h +++ b/include/linux/mfd/ti_ssp.h @@ -38,6 +38,10 @@ struct ti_ssp_spi_data { void (*select)(int cs); }; +struct ti_ssp_gpio_data { + int start; +}; + /* * Sequencer port IO pin configuration bits. These do not correlate 1-1 with * the hardware. The iosel field in the port data combines iosel1 and iosel2, -- 1.7.1 ------------------------------------------------------------------------------ Centralized Desktop Delivery: Dell and VMware Reference Architecture Simplifying enterprise desktop deployment and management using Dell EqualLogic storage and VMware View: A highly scalable, end-to-end client virtualization framework. Read more! http://p.sf.net/sfu/dell-eql-dev2dev
WARNING: multiple messages have this Message-ID (diff)
From: cyril@ti.com (Cyril Chemparathy) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v5 08/12] gpio: add ti-ssp gpio driver Date: Mon, 15 Nov 2010 14:12:10 -0500 [thread overview] Message-ID: <1289848334-8695-9-git-send-email-cyril@ti.com> (raw) In-Reply-To: <1289848334-8695-1-git-send-email-cyril@ti.com> TI's SSP controller pins can be directly read and written to behave like a GPIO. This patch adds a GPIO driver that exposes such functionality. Signed-off-by: Cyril Chemparathy <cyril@ti.com> --- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 1 + drivers/mfd/ti-ssp-gpio.c | 205 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/ti_ssp.h | 4 + 4 files changed, 220 insertions(+), 0 deletions(-) create mode 100644 drivers/mfd/ti-ssp-gpio.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 7dcc03a..b193580 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -102,6 +102,16 @@ config MFD_TI_SSP_SPI To compile this driver as a module, choose M here: the module will be called ti-ssp-spi. +config MFD_TI_SSP_GPIO + tristate "TI Sequencer Serial Port - GPIO Support" + depends on GPIOLIB && MFD_TI_SSP + help + Say yes here to support a GPIO interface on TI SSP port pins. + Each SSP port translates into 4 GPIOs. + + This driver can also be built as a module. If so, the module + will be called ti-ssp-gpio. + config HTC_EGPIO bool "HTC EGPIO support" depends on GENERIC_HARDIRQS && GPIOLIB && ARM diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ba97f48..87b5de8 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o obj-$(CONFIG_MFD_TI_SSP_SPI) += ti-ssp-spi.o +obj-$(CONFIG_MFD_TI_SSP_GPIO) += ti-ssp-gpio.o obj-$(CONFIG_MFD_STMPE) += stmpe.o obj-$(CONFIG_MFD_TC35892) += tc35892.o diff --git a/drivers/mfd/ti-ssp-gpio.c b/drivers/mfd/ti-ssp-gpio.c new file mode 100644 index 0000000..a3e909b --- /dev/null +++ b/drivers/mfd/ti-ssp-gpio.c @@ -0,0 +1,205 @@ +/* + * Sequencer Serial Port (SSP) based virtual GPIO driver + * + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/mfd/ti_ssp.h> + +struct ti_ssp_gpio { + struct gpio_chip chip; +#define chip2gpio(chip) container_of(chip, struct ti_ssp_gpio, chip) + struct device *dev; + spinlock_t lock; + u8 out; + u32 iosel; +}; + +static int direction_in(struct gpio_chip *chip, unsigned gpio_num) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + int error = 0; + + spin_lock(&gpio->lock); + + gpio->iosel &= ~SSP_PIN_MASK(gpio_num); + gpio->iosel |= SSP_PIN_SEL(gpio_num, SSP_IN); + + error = ti_ssp_set_iosel(gpio->dev, gpio->iosel); + + spin_unlock(&gpio->lock); + + return error; +} + +static int direction_out(struct gpio_chip *chip, unsigned gpio_num, int val) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + int error; + + spin_lock(&gpio->lock); + + gpio->iosel &= ~SSP_PIN_MASK(gpio_num); + gpio->iosel |= SSP_PIN_SEL(gpio_num, SSP_OUT); + + error = ti_ssp_set_iosel(gpio->dev, gpio->iosel); + + if (error < 0) + goto error; + + if (val) + gpio->out |= BIT(gpio_num); + else + gpio->out &= ~BIT(gpio_num); + + error = ti_ssp_raw_write(gpio->dev, gpio->out); + +error: + spin_unlock(&gpio->lock); + return error; +} + +static int value_get(struct gpio_chip *chip, unsigned gpio_num) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + int ret; + + spin_lock(&gpio->lock); + + ret = ti_ssp_raw_read(gpio->dev); + if (ret >= 0) + ret = (ret & BIT(gpio_num)) ? 1 : 0; + + spin_unlock(&gpio->lock); + return ret; +} + +static void value_set(struct gpio_chip *chip, unsigned gpio_num, int val) +{ + struct ti_ssp_gpio *gpio = chip2gpio(chip); + + spin_lock(&gpio->lock); + + if (val) + gpio->out |= BIT(gpio_num); + else + gpio->out &= ~BIT(gpio_num); + + ti_ssp_raw_write(gpio->dev, gpio->out); + + spin_unlock(&gpio->lock); +} + +static int __devinit ti_ssp_gpio_probe(struct platform_device *pdev) +{ + const struct ti_ssp_gpio_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct ti_ssp_gpio *gpio; + int error; + + if (!pdata) { + dev_err(dev, "platform data not found\n"); + return -EINVAL; + } + + gpio = kzalloc(sizeof(*gpio), GFP_KERNEL); + if (!gpio) { + dev_err(dev, "cannot allocate driver data\n"); + return -ENOMEM; + } + + gpio->dev = dev; + gpio->iosel = SSP_PIN_SEL(0, SSP_IN) | SSP_PIN_SEL(1, SSP_IN) | + SSP_PIN_SEL(2, SSP_IN) | SSP_PIN_SEL(3, SSP_IN); + error = ti_ssp_set_iosel(gpio->dev, gpio->iosel); + if (error < 0) { + dev_err(dev, "gpio io setup failed (%d)\n", error); + goto error; + } + + spin_lock_init(&gpio->lock); + platform_set_drvdata(pdev, gpio); + + gpio->chip.base = pdata->start; + gpio->chip.ngpio = 4; + gpio->chip.dev = &pdev->dev; + gpio->chip.label = "ti_ssp_gpio"; + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = value_get; + gpio->chip.set = value_set; + gpio->chip.direction_input = direction_in; + gpio->chip.direction_output = direction_out; + + error = gpiochip_add(&gpio->chip); + if (error < 0) { + dev_err(dev, "gpio chip registration failed (%d)\n", error); + goto error; + } + + dev_info(dev, "ssp gpio interface registered\n"); + return 0; + +error: + kfree(gpio); + return error; +} + +static int __devexit ti_ssp_gpio_remove(struct platform_device *pdev) +{ + struct ti_ssp_gpio *gpio = platform_get_drvdata(pdev); + int error; + + error = gpiochip_remove(&gpio->chip); + if (error < 0) + return error; + kfree(gpio); + return 0; +} + +static struct platform_driver ti_ssp_gpio_driver = { + .probe = ti_ssp_gpio_probe, + .remove = __devexit_p(ti_ssp_gpio_remove), + .driver = { + .name = "ti-ssp-gpio", + .owner = THIS_MODULE, + }, +}; + +static int __init ti_ssp_gpio_init(void) +{ + return platform_driver_register(&ti_ssp_gpio_driver); +} +subsys_initcall(ti_ssp_gpio_init); + +static void __exit ti_ssp_gpio_exit(void) +{ + platform_driver_unregister(&ti_ssp_gpio_driver); +} +module_exit(ti_ssp_gpio_exit); + +MODULE_DESCRIPTION("GPIO interface for TI-SSP"); +MODULE_AUTHOR("Cyril Chemparathy <cyril@ti.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ti-ssp-gpio"); diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h index dbb4b43..10c65bb 100644 --- a/include/linux/mfd/ti_ssp.h +++ b/include/linux/mfd/ti_ssp.h @@ -38,6 +38,10 @@ struct ti_ssp_spi_data { void (*select)(int cs); }; +struct ti_ssp_gpio_data { + int start; +}; + /* * Sequencer port IO pin configuration bits. These do not correlate 1-1 with * the hardware. The iosel field in the port data combines iosel1 and iosel2, -- 1.7.1
next prev parent reply other threads:[~2010-11-15 19:12 UTC|newest] Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-11-15 19:12 [PATCH v5 00/12] tnetv107x ssp drivers Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [not found] ` <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-15 19:12 ` [PATCH v5 01/12] misc: add driver for sequencer serial port Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [not found] ` <1289848334-8695-2-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-16 7:10 ` Grant Likely 2010-11-16 7:10 ` Grant Likely [not found] ` <20101116071047.GE4074-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-16 16:15 ` Cyril Chemparathy 2010-11-16 16:15 ` Cyril Chemparathy [not found] ` <4CE2AE3C.4040805-l0cyMroinI0@public.gmane.org> 2010-11-16 20:35 ` Grant Likely 2010-11-16 20:35 ` Grant Likely [not found] ` <AANLkTik76EY8Xh01YP2Tep6k1ETPO+3idmNuk3pVikJG-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-11-16 21:19 ` Cyril Chemparathy 2010-11-16 21:19 ` Cyril Chemparathy 2010-11-16 22:23 ` Russell King - ARM Linux 2010-11-16 22:23 ` Russell King - ARM Linux [not found] ` <20101116222340.GF21926-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org> 2010-11-16 23:57 ` Grant Likely 2010-11-16 23:57 ` Grant Likely 2010-11-15 19:12 ` [PATCH v5 02/12] davinci: add tnetv107x ssp platform device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 03/12] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 04/12] spi: add ti-ssp spi master driver Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 21:59 ` Ryan Mallon 2010-11-15 21:59 ` Ryan Mallon [not found] ` <1289848334-8695-5-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-16 7:22 ` Grant Likely 2010-11-16 7:22 ` Grant Likely [not found] ` <20101116072225.GF4074-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-16 7:47 ` Grant Likely 2010-11-16 7:47 ` Grant Likely 2010-11-16 11:34 ` Mark Brown 2010-11-16 11:34 ` Mark Brown [not found] ` <20101116113409.GH3338-GFdadSzt00ze9xe1eoZjHA@public.gmane.org> 2010-11-16 20:45 ` Grant Likely 2010-11-16 20:45 ` Grant Likely [not found] ` <20101116204554.GB5016-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-16 22:48 ` Mark Brown 2010-11-16 22:48 ` Mark Brown [not found] ` <AANLkTi=utWumLKo9QVWXpkC8WxpgaNJJs+dj=pa2eq-q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2010-11-17 0:17 ` Cyril Chemparathy 2010-11-17 0:17 ` Cyril Chemparathy 2010-11-17 13:31 ` Mark Brown 2010-11-17 13:31 ` Mark Brown [not found] ` <20101117133136.GA19488-HF5t3jzXg/6ND3a5+9QAFujbO/Zr0HzV@public.gmane.org> 2010-11-17 15:25 ` David Brownell 2010-11-17 15:25 ` David Brownell [not found] ` <781931.83221.qm-g47maUHHHF+ORdMXk8NaZPu2YVrzzGjVVpNB7YpNyf8@public.gmane.org> 2010-11-17 17:54 ` Cyril Chemparathy 2010-11-17 17:54 ` Cyril Chemparathy [not found] ` <4CE31F0E.7050103-l0cyMroinI0@public.gmane.org> 2010-11-17 16:11 ` Grant Likely 2010-11-17 16:11 ` Grant Likely [not found] ` <20101117161130.GC5757-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org> 2010-11-17 17:23 ` Mark Brown 2010-11-17 17:23 ` Mark Brown 2010-11-17 17:35 ` Cyril Chemparathy 2010-11-17 17:35 ` Cyril Chemparathy 2010-11-18 5:46 ` Greg KH 2010-11-18 5:46 ` Greg KH 2010-11-25 23:32 ` Rafael J. Wysocki 2010-11-25 23:32 ` Rafael J. Wysocki 2010-11-16 14:19 ` David Brownell 2010-11-16 14:19 ` David Brownell 2010-11-15 19:12 ` [PATCH v5 05/12] davinci: add spi devices on tnetv107x evm Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 06/12] regulator: add driver for tps6524x regulator Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 07/12] davinci: add tnetv107x evm regulators Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy [this message] 2010-11-15 19:12 ` [PATCH v5 08/12] gpio: add ti-ssp gpio driver Cyril Chemparathy [not found] ` <1289848334-8695-9-git-send-email-cyril-l0cyMroinI0@public.gmane.org> 2010-11-15 22:38 ` Ryan Mallon 2010-11-15 22:38 ` Ryan Mallon [not found] ` <4CE1B651.1060006-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org> 2010-11-16 19:38 ` Cyril Chemparathy 2010-11-16 19:38 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 09/12] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 10/12] backlight: add support for tps6116x controller Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 11/12] davinci: add tnetv107x evm backlight device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy 2010-11-15 19:12 ` [PATCH v5 12/12] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy 2010-11-15 19:12 ` Cyril Chemparathy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1289848334-8695-9-git-send-email-cyril@ti.com \ --to=cyril-l0cymroini0@public.gmane.org \ --cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \ --cc=alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org \ --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \ --cc=davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org \ --cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ --cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \ --cc=lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \ --cc=rpurdie@rpsys \ --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \ --cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.