All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 20/40] wl12xx: update BT coex configuration params
Date: Sun, 14 Aug 2011 13:17:19 +0300	[thread overview]
Message-ID: <1313317059-16567-21-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

The BT coex params api have been changed.
Update it, and init coex for both sta and ap.

Signed-off-by: Eliad Peller <eliad@wizery.com>
---
v2: fix comments, don't disable fm coex

 drivers/net/wireless/wl12xx/acx.c  |   40 +----
 drivers/net/wireless/wl12xx/acx.h  |   16 +--
 drivers/net/wireless/wl12xx/conf.h |  318 ++++++++++++------------------------
 drivers/net/wireless/wl12xx/init.c |    5 +-
 drivers/net/wireless/wl12xx/main.c |  165 +++++++------------
 5 files changed, 177 insertions(+), 367 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index a784ba6..d783fce 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -525,59 +525,29 @@ int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable)
 
 out:
 	kfree(pta);
 	return ret;
 }
 
-int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)
+int wl12xx_acx_sg_cfg(struct wl1271 *wl)
 {
-	struct acx_sta_bt_wlan_coex_param *param;
+	struct acx_bt_wlan_coex_param *param;
 	struct conf_sg_settings *c = &wl->conf.sg;
 	int i, ret;
 
-	wl1271_debug(DEBUG_ACX, "acx sg sta cfg");
+	wl1271_debug(DEBUG_ACX, "acx sg cfg");
 
 	param = kzalloc(sizeof(*param), GFP_KERNEL);
 	if (!param) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
 	/* BT-WLAN coext parameters */
-	for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)
-		param->params[i] = cpu_to_le32(c->sta_params[i]);
-	param->param_idx = CONF_SG_PARAMS_ALL;
-
-	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
-	if (ret < 0) {
-		wl1271_warning("failed to set sg config: %d", ret);
-		goto out;
-	}
-
-out:
-	kfree(param);
-	return ret;
-}
-
-int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)
-{
-	struct acx_ap_bt_wlan_coex_param *param;
-	struct conf_sg_settings *c = &wl->conf.sg;
-	int i, ret;
-
-	wl1271_debug(DEBUG_ACX, "acx sg ap cfg");
-
-	param = kzalloc(sizeof(*param), GFP_KERNEL);
-	if (!param) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/* BT-WLAN coext parameters */
-	for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)
-		param->params[i] = cpu_to_le32(c->ap_params[i]);
+	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
+		param->params[i] = cpu_to_le32(c->params[i]);
 	param->param_idx = CONF_SG_PARAMS_ALL;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
 		wl1271_warning("failed to set sg config: %d", ret);
 		goto out;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 6909bc5..5b3fabd 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -299,29 +299,20 @@ struct acx_bt_wlan_coex {
 	struct acx_header header;
 
 	u8 enable;
 	u8 pad[3];
 } __packed;
 
-struct acx_sta_bt_wlan_coex_param {
+struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	__le32 params[CONF_SG_STA_PARAMS_MAX];
+	__le32 params[CONF_SG_PARAMS_MAX];
 	u8 param_idx;
 	u8 padding[3];
 } __packed;
 
-struct acx_ap_bt_wlan_coex_param {
-	struct acx_header header;
-
-	__le32 params[CONF_SG_AP_PARAMS_MAX];
-	u8 param_idx;
-	u8 padding[3];
-} __packed;
-
-
 struct acx_dco_itrim_params {
 	struct acx_header header;
 
 	u8 enable;
 	u8 padding[3];
 	__le32 timeout;
@@ -1266,14 +1257,13 @@ int wl1271_acx_service_period_timeout(struct wl1271 *wl);
 int wl1271_acx_rts_threshold(struct wl1271 *wl, u32 rts_threshold);
 int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
 int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
 int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
 int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
-int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);
-int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);
+int wl12xx_acx_sg_cfg(struct wl1271 *wl);
 int wl1271_acx_cca_threshold(struct wl1271 *wl);
 int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
 int wl1271_acx_aid(struct wl1271 *wl, u16 aid);
 int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask);
 int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble);
 int wl1271_acx_cts_protect(struct wl1271 *wl,
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 30ee7d3..a7c1478 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -96,46 +96,81 @@ enum {
 	CONF_SG_PROTECTIVE,
 	CONF_SG_OPPORTUNISTIC
 };
 
 enum {
 	/*
-	 * PER threshold in PPM of the BT voice
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT master basic rate
 	 *
-	 * Range: 0 - 10000000
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_BT_PER_THRESHOLD = 0,
+	CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
+	CONF_SG_ACL_BT_MASTER_MAX_BR,
 
 	/*
-	 * Number of consequent RX_ACTIVE activities to override BT voice
-	 * frames to ensure WLAN connection
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT slave basic rate
 	 *
-	 * Range: 0 - 100
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_HV3_MAX_OVERRIDE,
+	CONF_SG_ACL_BT_SLAVE_MIN_BR,
+	CONF_SG_ACL_BT_SLAVE_MAX_BR,
 
 	/*
-	 * Defines the PER threshold of the BT voice
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT master EDR
 	 *
-	 * Range: 0 - 65000
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_BT_NFS_SAMPLE_INTERVAL,
+	CONF_SG_ACL_BT_MASTER_MIN_EDR,
+	CONF_SG_ACL_BT_MASTER_MAX_EDR,
 
 	/*
-	 * Defines the load ratio of BT
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT slave EDR
 	 *
-	 * Range: 0 - 100 (%)
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_BT_LOAD_RATIO,
+	CONF_SG_ACL_BT_SLAVE_MIN_EDR,
+	CONF_SG_ACL_BT_SLAVE_MAX_EDR,
 
 	/*
-	 * Defines whether the SG will force WLAN host to enter/exit PSM
+	 * The maximum time WLAN can gain the antenna
+	 * in WLAN PSM / BT master/slave BR
 	 *
-	 * Range: 1 - SG can force, 0 - host handles PSM
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_AUTO_PS_MODE,
+	CONF_SG_ACL_WLAN_PS_MASTER_BR,
+	CONF_SG_ACL_WLAN_PS_SLAVE_BR,
+
+	/*
+	 * The maximum time WLAN can gain the antenna
+	 * in WLAN PSM / BT master/slave EDR
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_ACL_WLAN_PS_MASTER_EDR,
+	CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
+
+	/* TODO: explain these values */
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
+
+	CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
+	CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
+	CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
+	CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
+	CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
+	CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
 
 	/*
 	 * Compensation percentage of probe requests when scan initiated
 	 * during BT voice/ACL link.
 	 *
 	 * Range: 0 - 255 (%)
@@ -148,108 +183,76 @@ enum {
 	 *
 	 * Range: 0 - 255 (%)
 	 */
 	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
 
 	/*
-	 * Defines antenna configuration (single/dual antenna)
-	 *
-	 * Range: 0 - single antenna, 1 - dual antenna
-	 */
-	CONF_SG_ANTENNA_CONFIGURATION,
-
-	/*
-	 * The threshold (percent) of max consequtive beacon misses before
-	 * increasing priority of beacon reception.
-	 *
-	 * Range: 0 - 100 (%)
-	 */
-	CONF_SG_BEACON_MISS_PERCENT,
-
-	/*
-	 * The rate threshold below which receiving a data frame from the AP
-	 * will increase the priority of the data frame above BT traffic.
-	 *
-	 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
-	 */
-	CONF_SG_RATE_ADAPT_THRESH,
-
-	/*
-	 * Not used currently.
+	 * Compensation percentage of WLAN active scan window if initiated
+	 * during BT A2DP
 	 *
-	 * Range: 0
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_RATE_ADAPT_SNR,
+	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT master basic rate
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT A2DP BR
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
 
 	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT master basic rate
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT A2DP EDR
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT slave basic rate
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT voice
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
 
-	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT slave basic rate
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
+	/* TODO: explain these values */
+	CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+	CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
+	CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT master EDR
+	 * Defines whether the SG will force WLAN host to enter/exit PSM
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 1 - SG can force, 0 - host handles PSM
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
+	CONF_SG_STA_FORCE_PS_IN_BT_SCO,
 
 	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT master EDR
+	 * Defines antenna configuration (single/dual antenna)
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - single antenna, 1 - dual antenna
 	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
+	CONF_SG_ANTENNA_CONFIGURATION,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT slave EDR
+	 * The threshold (percent) of max consecutive beacon misses before
+	 * increasing priority of beacon reception.
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 100 (%)
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
+	CONF_SG_BEACON_MISS_PERCENT,
 
 	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT slave EDR
+	 * Protection time of the DHCP procedure.
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 100000 (ms)
 	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
+	CONF_SG_DHCP_TIME,
 
 	/*
 	 * RX guard time before the beginning of a new BT voice frame during
 	 * which no new WLAN trigger frame is transmitted.
 	 *
 	 * Range: 0 - 100000 (us)
@@ -270,172 +273,65 @@ enum {
 	 * will be utilized.
 	 *
 	 * Range: 0 - disable, 1 - enable
 	 */
 	CONF_SG_ADAPTIVE_RXT_TXT,
 
-	/*
-	 * The used WLAN legacy service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_PS_POLL_TIMEOUT,
-
-	/*
-	 * The used WLAN UPSD service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_UPSD_TIMEOUT,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN Active / BT master EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna for
-	 * in WLAN Active / BT master EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
+	/* TODO: explain this value */
+	CONF_SG_GENERAL_USAGE_BIT_MAP,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN Active / BT slave EDR
+	 * Number of consecutive BT voice frames not interrupted by WLAN
 	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
-	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna for
-	 * in WLAN Active / BT slave EDR
-	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 100
 	 */
-	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
+	CONF_SG_HV3_MAX_SERVED,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN Active / BT basic rate
+	 * The used WLAN legacy service period during active BT ACL link
 	 *
 	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
+	CONF_SG_PS_POLL_TIMEOUT,
 
 	/*
-	 * The maximum time WLAN can gain the antenna for
-	 * in WLAN Active / BT basic rate
+	 * The used WLAN UPSD service period during active BT ACL link
 	 *
 	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT voice
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT A2DP
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
+	CONF_SG_UPSD_TIMEOUT,
 
-	/*
-	 * Fixed time ensured for BT traffic to gain the antenna during WLAN
-	 * passive scan.
-	 *
-	 * Range: 0 - 1000 ms
-	 */
-	CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
+	CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+	CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
+	CONF_SG_STA_CONNECTION_PROTECTION_TIME,
 
-	/*
-	 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
-	 * passive scan.
-	 *
-	 * Range: 0 - 1000 ms
-	 */
-	CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
+	/* AP params */
+	CONF_AP_BEACON_MISS_TX,
+	CONF_AP_RX_WINDOW_AFTER_BEACON,
+	CONF_AP_BEACON_WINDOW_INTERVAL,
+	CONF_AP_CONNECTION_PROTECTION_TIME,
+	CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
+	CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
 
-	/*
-	 * Number of consequent BT voice frames not interrupted by WLAN
-	 *
-	 * Range: 0 - 100
-	 */
-	CONF_SG_HV3_MAX_SERVED,
-
-	/*
-	 * Protection time of the DHCP procedure.
-	 *
-	 * Range: 0 - 100000 (ms)
-	 */
-	CONF_SG_DHCP_TIME,
-
-	/*
-	 * Compensation percentage of WLAN active scan window if initiated
-	 * during BT A2DP
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 	CONF_SG_TEMP_PARAM_1,
 	CONF_SG_TEMP_PARAM_2,
 	CONF_SG_TEMP_PARAM_3,
 	CONF_SG_TEMP_PARAM_4,
 	CONF_SG_TEMP_PARAM_5,
-
-	/*
-	 * AP beacon miss
-	 *
-	 * Range: 0 - 255
-	 */
-	CONF_SG_AP_BEACON_MISS_TX,
-
-	/*
-	 * AP RX window length
-	 *
-	 * Range: 0 - 50
-	 */
-	CONF_SG_RX_WINDOW_LENGTH,
-
-	/*
-	 * AP connection protection time
-	 *
-	 * Range: 0 - 5000
-	 */
-	CONF_SG_AP_CONNECTION_PROTECTION_TIME,
-
 	CONF_SG_TEMP_PARAM_6,
 	CONF_SG_TEMP_PARAM_7,
 	CONF_SG_TEMP_PARAM_8,
 	CONF_SG_TEMP_PARAM_9,
 	CONF_SG_TEMP_PARAM_10,
 
-	CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
-	CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
-
+	CONF_SG_PARAMS_MAX,
 	CONF_SG_PARAMS_ALL = 0xff
 };
 
 struct conf_sg_settings {
-	u32 sta_params[CONF_SG_STA_PARAMS_MAX];
-	u32 ap_params[CONF_SG_AP_PARAMS_MAX];
+	u32 params[CONF_SG_PARAMS_MAX];
 	u8 state;
 };
 
 enum conf_rx_queue_type {
 	CONF_RX_QUEUE_TYPE_LOW_PRIORITY,  /* All except the high priority */
 	CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
@@ -910,13 +806,13 @@ struct conf_conn_settings {
 	 * Configure Beacon filter pass-thru rules.
 	 */
 	u8 bcn_filt_ie_count;
 	struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
 
 	/*
-	 * The number of consequtive beacons to lose, before the firmware
+	 * The number of consecutive beacons to lose, before the firmware
 	 * becomes out of synch.
 	 *
 	 * Range: u32
 	 */
 	u32 synch_fail_thold;
 
@@ -948,13 +844,13 @@ struct conf_conn_settings {
 	 *
 	 * Range: 1 - enable, 0 - disable
 	 */
 	u8 rx_broadcast_in_ps;
 
 	/*
-	 * Consequtive PS Poll failures before sending event to driver
+	 * Consecutive PS Poll failures before sending event to driver
 	 *
 	 * Range: u8
 	 */
 	u8 ps_poll_threshold;
 
 	/*
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
index 1bc246f..47d87aa 100644
--- a/drivers/net/wireless/wl12xx/init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -274,16 +274,13 @@ static int wl1271_init_beacon_filter(struct wl1271 *wl)
 }
 
 int wl1271_init_pta(struct wl1271 *wl)
 {
 	int ret;
 
-	if (wl->bss_type == BSS_TYPE_AP_BSS)
-		ret = wl1271_acx_ap_sg_cfg(wl);
-	else
-		ret = wl1271_acx_sta_sg_cfg(wl);
+	ret = wl12xx_acx_sg_cfg(wl);
 	if (ret < 0)
 		return ret;
 
 	ret = wl1271_acx_sg_enable(wl, wl->sg_enabled);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 57b10e9..1774a66 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -49,116 +49,73 @@
 #include "scan.h"
 
 #define WL1271_BOOT_RETRIES 3
 
 static struct conf_drv_settings default_conf = {
 	.sg = {
-		.sta_params = {
-			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
-			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
-			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
-			[CONF_SG_BT_LOAD_RATIO]                     = 200,
-			[CONF_SG_AUTO_PS_MODE]                      = 1,
-			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,
-			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,
-			[CONF_SG_BEACON_MISS_PERCENT]               = 60,
-			[CONF_SG_RATE_ADAPT_THRESH]                 = 12,
-			[CONF_SG_RATE_ADAPT_SNR]                    = 0,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 30,
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 8,
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 50,
-			/* Note: with UPSD, this should be 4 */
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 8,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 20,
-			/* Note: with UPDS, this should be 15 */
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,
-			/* Note: with UPDS, this should be 50 */
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 40,
-			/* Note: with UPDS, this should be 10 */
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 20,
-			[CONF_SG_RXT]                               = 1200,
-			[CONF_SG_TXT]                               = 1000,
-			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,
-			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,
-			[CONF_SG_UPSD_TIMEOUT]                      = 10,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
-			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,
-			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,
-			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
-			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,
-			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,
-			[CONF_SG_HV3_MAX_SERVED]                    = 6,
-			[CONF_SG_DHCP_TIME]                         = 5000,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
-		},
-		.ap_params = {
-			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
-			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
-			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
-			[CONF_SG_BT_LOAD_RATIO]                     = 50,
-			[CONF_SG_AUTO_PS_MODE]                      = 1,
-			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,
-			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,
-			[CONF_SG_BEACON_MISS_PERCENT]               = 60,
-			[CONF_SG_RATE_ADAPT_THRESH]                 = 64,
-			[CONF_SG_RATE_ADAPT_SNR]                    = 1,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 25,
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 25,
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 25,
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 25,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,
-			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 25,
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,
-			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 25,
-			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 25,
-			[CONF_SG_RXT]                               = 1200,
-			[CONF_SG_TXT]                               = 1000,
-			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,
-			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,
-			[CONF_SG_UPSD_TIMEOUT]                      = 10,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
-			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,
-			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,
-			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,
-			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,
-			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
-			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,
-			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,
-			[CONF_SG_HV3_MAX_SERVED]                    = 6,
-			[CONF_SG_DHCP_TIME]                         = 5000,
-			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
-			[CONF_SG_TEMP_PARAM_1]                      = 0,
-			[CONF_SG_TEMP_PARAM_2]                      = 0,
-			[CONF_SG_TEMP_PARAM_3]                      = 0,
-			[CONF_SG_TEMP_PARAM_4]                      = 0,
-			[CONF_SG_TEMP_PARAM_5]                      = 0,
-			[CONF_SG_AP_BEACON_MISS_TX]                 = 3,
-			[CONF_SG_RX_WINDOW_LENGTH]                  = 6,
-			[CONF_SG_AP_CONNECTION_PROTECTION_TIME]     = 50,
-			[CONF_SG_TEMP_PARAM_6]                      = 1,
+		.params = {
+			[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
+			[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
+			[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
+			[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
+			[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
+			[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
+			[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
+			[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
+			[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
+			[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
+			[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
+			[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
+			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
+			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
+			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
+			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
+			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
+			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
+			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
+			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
+			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
+			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
+			[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
+			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
+			[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
+			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
+			/* active scan params */
+			[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
+			/* passive scan params */
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
+			/* passive scan in dual antenna params */
+			[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
+			[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
+			[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
+			/* general params */
+			[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
+			[CONF_SG_ANTENNA_CONFIGURATION] = 0,
+			[CONF_SG_BEACON_MISS_PERCENT] = 60,
+			[CONF_SG_DHCP_TIME] = 5000,
+			[CONF_SG_RXT] = 1200,
+			[CONF_SG_TXT] = 1000,
+			[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
+			[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
+			[CONF_SG_HV3_MAX_SERVED] = 6,
+			[CONF_SG_PS_POLL_TIMEOUT] = 10,
+			[CONF_SG_UPSD_TIMEOUT] = 10,
+			[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
+			[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
+			[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
+			/* AP params */
+			[CONF_AP_BEACON_MISS_TX] = 3,
+			[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
+			[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
+			[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
+			[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
+			[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
 		},
 		.state = CONF_SG_PROTECTIVE,
 	},
 	.rx = {
 		.rx_msdu_life_time           = 512000,
 		.packet_detection_threshold  = 0,
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:17 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-21-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.