All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA
Date: Sun, 14 Aug 2011 13:17:27 +0300	[thread overview]
Message-ID: <1313317059-16567-29-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

From: Arik Nemtsov <arik@wizery.com>

In addition, set global HT operation mode via ACX_HT_BSS_OPERATION when
a change is detected by usermode

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
 drivers/net/wireless/wl12xx/acx.c  |   10 ++++++----
 drivers/net/wireless/wl12xx/acx.h  |    2 +-
 drivers/net/wireless/wl12xx/main.c |   34 +++++++++++++++++++++++++++-------
 3 files changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index ecbceb6..e047594 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -1306,27 +1306,29 @@ out:
 	kfree(acx);
 	return ret;
 }
 
 int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 				    struct ieee80211_sta_ht_cap *ht_cap,
-				    bool allow_ht_operation)
+				    bool allow_ht_operation, u8 hlid)
 {
 	struct wl1271_acx_ht_capabilities *acx;
 	int ret = 0;
 	u32 ht_capabilites = 0;
 
-	wl1271_debug(DEBUG_ACX, "acx ht capabilities setting");
+	wl1271_debug(DEBUG_ACX, "acx ht capabilities setting "
+		     "sta supp: %d sta cap: %d", ht_cap->ht_supported,
+		     ht_cap->cap);
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	if (allow_ht_operation) {
+	if (allow_ht_operation && ht_cap->ht_supported) {
 		/* no need to translate capabilities - use the spec values */
 		ht_capabilites = ht_cap->cap;
 
 		/*
 		 * this bit is not employed by the spec but only by FW to
 		 * indicate peer HT support
@@ -1335,13 +1337,13 @@ int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 
 		/* get data from A-MPDU parameters field */
 		acx->ampdu_max_length = ht_cap->ampdu_factor;
 		acx->ampdu_min_spacing = ht_cap->ampdu_density;
 	}
 
-	acx->hlid = wl->sta_hlid;
+	acx->hlid = hlid;
 	acx->ht_capabilites = cpu_to_le32(ht_capabilites);
 
 	ret = wl1271_cmd_configure(wl, ACX_PEER_HT_CAP, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("acx ht capabilities setting failed: %d", ret);
 		goto out;
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 82c9271..758c596 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -1265,13 +1265,13 @@ int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable);
 int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid);
 int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
 				s16 thold, u8 hyst);
 int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
 int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
 				    struct ieee80211_sta_ht_cap *ht_cap,
-				    bool allow_ht_operation);
+				    bool allow_ht_operation, u8 hlid);
 int wl1271_acx_set_ht_information(struct wl1271 *wl,
 				   u16 ht_operation_mode);
 int wl12xx_acx_set_ba_initiator_policy(struct wl1271 *wl);
 int wl12xx_acx_set_ba_receiver_session(struct wl1271 *wl, u8 tid_index,
 				       u16 ssn, bool enable, u8 peer_hlid);
 int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index de4b6c2..053751e 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -3121,12 +3121,24 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 		}
 	}
 
 	ret = wl1271_bss_erp_info_changed(wl, bss_conf, changed);
 	if (ret < 0)
 		goto out;
+
+	/* Handle HT information change */
+	if ((changed & BSS_CHANGED_HT) &&
+	    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
+		ret = wl1271_acx_set_ht_information(wl,
+					bss_conf->ht_operation_mode);
+		if (ret < 0) {
+			wl1271_warning("Set ht information failed %d", ret);
+			goto out;
+		}
+	}
+
 out:
 	return;
 }
 
 /* STA/IBSS mode changes */
 static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
@@ -3436,38 +3448,42 @@ sta_not_found:
 			ret = wl12xx_cmd_role_stop_dev(wl);
 			if (ret < 0)
 				goto out;
 		}
 	}
 
-	/* Handle new association with HT. Do this only after join. */
+	/* Handle new association with HT. Do this after join. */
 	if (sta_exists) {
 		if ((changed & BSS_CHANGED_HT) &&
 		    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
-			ret = wl1271_acx_set_ht_capabilities(wl, &sta_ht_cap,
-							     true);
+			ret = wl1271_acx_set_ht_capabilities(wl,
+							     &sta_ht_cap,
+							     true,
+							     wl->sta_hlid);
 			if (ret < 0) {
 				wl1271_warning("Set ht cap true failed %d",
 					       ret);
 				goto out;
 			}
 		}
 		/* handle new association without HT and disassociation */
 		else if (changed & BSS_CHANGED_ASSOC) {
-			ret = wl1271_acx_set_ht_capabilities(wl, &sta_ht_cap,
-							     false);
+			ret = wl1271_acx_set_ht_capabilities(wl,
+							     &sta_ht_cap,
+							     false,
+							     wl->sta_hlid);
 			if (ret < 0) {
 				wl1271_warning("Set ht cap false failed %d",
 					       ret);
 				goto out;
 			}
 		}
 	}
 
-	/* Handle HT information change. Only after join. */
-	if (sta_exists && (changed & BSS_CHANGED_HT) &&
+	/* Handle HT information change. Done after join. */
+	if ((changed & BSS_CHANGED_HT) &&
 	    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
 		ret = wl1271_acx_set_ht_information(wl,
 					bss_conf->ht_operation_mode);
 		if (ret < 0) {
 			wl1271_warning("Set ht information failed %d", ret);
 			goto out;
@@ -3700,12 +3716,16 @@ static int wl1271_op_sta_add(struct ieee80211_hw *hw,
 		goto out_sleep;
 
 	ret = wl12xx_cmd_set_peer_state(wl, hlid);
 	if (ret < 0)
 		goto out_sleep;
 
+	ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true, hlid);
+	if (ret < 0)
+		goto out_sleep;
+
 out_sleep:
 	wl1271_ps_elp_sleep(wl);
 
 out_free_sta:
 	if (ret < 0)
 		wl1271_free_sta(wl, hlid);
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:17 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` [PATCH v2 27/40] wl12xx: support IBSS vif type Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-29-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.