All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eliad Peller <eliad@wizery.com>
To: Luciano Coelho <coelho@ti.com>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 27/40] wl12xx: support IBSS vif type
Date: Sun, 14 Aug 2011 13:17:26 +0300	[thread overview]
Message-ID: <1313317059-16567-28-git-send-email-eliad@wizery.com> (raw)
In-Reply-To: <1313317059-16567-1-git-send-email-eliad@wizery.com>

Start IBSS role when the interface type is IBSS.
As with sta role, use the dev role until the role
is started.

Signed-off-by: Eliad Peller <eliad@wizery.com>
---
 drivers/net/wireless/wl12xx/main.c   |   33 ++++++++++++++++++++++++++++-----
 drivers/net/wireless/wl12xx/scan.c   |    9 ++++++++-
 drivers/net/wireless/wl12xx/tx.c     |    3 ++-
 drivers/net/wireless/wl12xx/wl12xx.h |    1 +
 4 files changed, 39 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 9b0df66..de4b6c2 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1767,12 +1767,15 @@ static u8 wl12xx_get_role_type(struct wl1271 *wl)
 	case BSS_TYPE_AP_BSS:
 		return WL1271_ROLE_AP;
 
 	case BSS_TYPE_STA_BSS:
 		return WL1271_ROLE_STA;
 
+	case BSS_TYPE_IBSS:
+		return WL1271_ROLE_IBSS;
+
 	default:
 		wl1271_error("invalid bss_type: %d", wl->bss_type);
 	}
 	return WL12XX_INVALID_ROLE_TYPE;
 }
 
@@ -1845,13 +1848,14 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 			goto power_off;
 
 		ret = wl1271_boot(wl);
 		if (ret < 0)
 			goto power_off;
 
-		if (wl->bss_type == BSS_TYPE_STA_BSS) {
+		if (wl->bss_type == BSS_TYPE_STA_BSS ||
+		    wl->bss_type == BSS_TYPE_IBSS) {
 			/*
 			 * The device role is a special role used for
 			 * rx and tx frames prior to association (as
 			 * the STA role can get packets only from
 			 * its associated bssid)
 			 */
@@ -2075,12 +2079,13 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 	cancel_work_sync(&wl->recovery_work);
 }
 
 static int wl1271_join(struct wl1271 *wl, bool set_assoc)
 {
 	int ret;
+	bool is_ibss = (wl->bss_type == BSS_TYPE_IBSS);
 
 	/*
 	 * One of the side effects of the JOIN command is that is clears
 	 * WPA/WPA2 keys from the chipset. Performing a JOIN while associated
 	 * to a WPA/WPA2 access point will therefore kill the data-path.
 	 * Currently the only valid scenario for JOIN during association
@@ -2091,13 +2096,16 @@ static int wl1271_join(struct wl1271 *wl, bool set_assoc)
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		wl1271_info("JOIN while associated.");
 
 	if (set_assoc)
 		set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 
-	ret = wl12xx_cmd_role_start_sta(wl);
+	if (is_ibss)
+		ret = wl12xx_cmd_role_start_ibss(wl);
+	else
+		ret = wl12xx_cmd_role_start_sta(wl);
 	if (ret < 0)
 		goto out;
 
 	if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		goto out;
 
@@ -3125,12 +3133,13 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 					struct ieee80211_vif *vif,
 					struct ieee80211_bss_conf *bss_conf,
 					u32 changed)
 {
 	bool do_join = false, set_assoc = false;
 	bool is_ibss = (wl->bss_type == BSS_TYPE_IBSS);
+	bool ibss_joined = false;
 	u32 sta_rate_set = 0;
 	int ret;
 	struct ieee80211_sta *sta;
 	bool sta_exists = false;
 	struct ieee80211_sta_ht_cap sta_ht_cap;
 
@@ -3138,20 +3147,34 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 		ret = wl1271_bss_beacon_info_changed(wl, vif, bss_conf,
 						     changed);
 		if (ret < 0)
 			goto out;
 	}
 
-	if ((changed & BSS_CHANGED_BEACON_INT)  && is_ibss)
+	if (changed & BSS_CHANGED_IBSS) {
+		if (bss_conf->ibss_joined) {
+			set_bit(WL1271_FLAG_IBSS_JOINED, &wl->flags);
+			ibss_joined = true;
+		} else {
+			if (test_and_clear_bit(WL1271_FLAG_IBSS_JOINED,
+					       &wl->flags)) {
+				wl1271_unjoin(wl);
+				wl12xx_cmd_role_start_dev(wl);
+				wl12xx_roc(wl, wl->dev_role_id);
+			}
+		}
+	}
+
+	if ((changed & BSS_CHANGED_BEACON_INT) && ibss_joined)
 		do_join = true;
 
 	/* Need to update the SSID (for filtering etc) */
-	if ((changed & BSS_CHANGED_BEACON) && is_ibss)
+	if ((changed & BSS_CHANGED_BEACON) && ibss_joined)
 		do_join = true;
 
-	if ((changed & BSS_CHANGED_BEACON_ENABLED) && is_ibss) {
+	if ((changed & BSS_CHANGED_BEACON_ENABLED) && ibss_joined) {
 		wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s",
 			     bss_conf->enable_beacon ? "enabled" : "disabled");
 
 		if (bss_conf->enable_beacon)
 			wl->set_bss_type = BSS_TYPE_IBSS;
 		else
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 653091a..7229eaa 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -31,12 +31,13 @@
 
 void wl1271_scan_complete_work(struct work_struct *work)
 {
 	struct delayed_work *dwork;
 	struct wl1271 *wl;
 	int ret;
+	bool is_sta, is_ibss;
 
 	dwork = container_of(work, struct delayed_work, work);
 	wl = container_of(dwork, struct wl1271, scan_complete_work);
 
 	wl1271_debug(DEBUG_SCAN, "Scanning complete");
 
@@ -56,13 +57,19 @@ void wl1271_scan_complete_work(struct work_struct *work)
 	if (ret < 0)
 		goto out;
 
 	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
 		/* restore hardware connection monitoring template */
 		wl1271_cmd_build_ap_probe_req(wl, wl->probereq);
-	} else {
+	}
+
+	/* return to ROC if needed */
+	is_sta = (wl->bss_type == BSS_TYPE_STA_BSS);
+	is_ibss = (wl->bss_type == BSS_TYPE_IBSS);
+	if ((is_sta && !test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) ||
+	    (is_ibss && !test_bit(WL1271_FLAG_IBSS_JOINED, &wl->flags))) {
 		/* restore remain on channel */
 		wl12xx_cmd_role_start_dev(wl);
 		wl12xx_roc(wl, wl->dev_role_id);
 	}
 	wl1271_ps_elp_sleep(wl);
 
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
index 1240f40..8fdffd0 100644
--- a/drivers/net/wireless/wl12xx/tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -179,13 +179,14 @@ static u8 wl1271_tx_get_hlid(struct wl1271 *wl, struct sk_buff *skb)
 	if (wl12xx_is_dummy_packet(wl, skb))
 		return wl->system_hlid;
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
 		return wl12xx_tx_get_hlid_ap(wl, skb);
 
-	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags) ||
+	    test_bit(WL1271_FLAG_IBSS_JOINED, &wl->flags))
 		return wl->sta_hlid;
 	else
 		return wl->dev_hlid;
 }
 
 static unsigned int wl12xx_calc_packet_alignment(struct wl1271 *wl,
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 487c3c7..416d68e 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -321,12 +321,13 @@ struct wl1271_ap_key {
 	u32 tx_seq_32;
 	u16 tx_seq_16;
 };
 
 enum wl12xx_flags {
 	WL1271_FLAG_STA_ASSOCIATED,
+	WL1271_FLAG_IBSS_JOINED,
 	WL1271_FLAG_GPIO_POWER,
 	WL1271_FLAG_TX_QUEUE_STOPPED,
 	WL1271_FLAG_TX_PENDING,
 	WL1271_FLAG_IN_ELP,
 	WL1271_FLAG_ELP_REQUESTED,
 	WL1271_FLAG_PSM,
-- 
1.7.6.401.g6a319


  parent reply	other threads:[~2011-08-14 10:17 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-14 10:16 [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Eliad Peller
2011-08-14 10:17 ` [PATCH v2 01/40] wl12xx: Revert "wl12xx: schedule TX packets according to FW occupancy" Eliad Peller
2011-08-14 10:17 ` [PATCH v2 02/40] wl12xx: Use a single fw for both STA and AP roles Eliad Peller
2011-08-14 10:17 ` [PATCH v2 03/40] wl12xx: use 1 spare block in all cases Eliad Peller
2011-08-14 10:17 ` [PATCH v2 04/40] wl12xx: temporarily disable advanced ap functions Eliad Peller
2011-08-14 10:17 ` [PATCH v2 05/40] wl12xx: remove rx filtering stuff Eliad Peller
2011-08-14 10:17 ` [PATCH v2 06/40] wl12xx: update fw status struct Eliad Peller
2011-08-14 10:17 ` [PATCH v2 07/40] wl12xx: update acx commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 08/40] wl12xx: update commands & events Eliad Peller
2011-08-14 10:17 ` [PATCH v2 09/40] wl12xx: enable/disable role on interface add/remove Eliad Peller
2011-08-14 10:17 ` [PATCH v2 10/40] wl12xx: add device role commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 11/40] wl12xx: update scan cmd api Eliad Peller
2011-08-14 10:17 ` [PATCH v2 12/40] wl12xx: update rx/tx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 13/40] wl12xx: change max/default template size Eliad Peller
2011-08-14 10:17 ` [PATCH v2 14/40] wl12xx: use wl1271_acx_beacon_filter_opt for both sta and ap Eliad Peller
2011-08-14 10:17 ` [PATCH v2 15/40] wl12xx: add set_rate_mgmt_params acx Eliad Peller
2011-08-14 10:17 ` [PATCH v2 16/40] wl12xx: add system_hlid Eliad Peller
2011-08-14 10:17 ` [PATCH v2 17/40] wl12xx: add ROC/CROC commands Eliad Peller
2011-08-14 10:17 ` [PATCH v2 18/40] wl12xx: replace dummy_join with " Eliad Peller
2011-08-14 10:17 ` [PATCH v2 19/40] wl12xx: handle dummy packet event also in ap mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 20/40] wl12xx: update BT coex configuration params Eliad Peller
2011-08-14 10:17 ` [PATCH v2 21/40] wl12xx: fix session counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 22/40] wl12xx: use dynamic hlids for AP-mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 23/40] wl12xx: re-enable block ack session support Eliad Peller
2011-08-14 10:17 ` [PATCH v2 24/40] wl12xx: call wl12xx_cmd_set_peer_state() in AP mode Eliad Peller
2011-08-14 10:17 ` [PATCH v2 25/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 26/40] wl12xx: add wl12xx_cmd_role_start_ibss() Eliad Peller
2011-08-14 10:17 ` Eliad Peller [this message]
2011-08-14 10:17 ` [PATCH v2 28/40] wl12xx: AP-mode - set STA HT capabilities when adding a STA Eliad Peller
2011-08-14 10:17 ` [PATCH v2 29/40] wl12xx: AP-mode - configure STA HT rates on join Eliad Peller
2011-08-14 10:17 ` [PATCH v2 30/40] wl12xx: AP-mode - configure HT rate support to the FW Eliad Peller
2011-08-14 10:17 ` [PATCH v2 31/40] wl12xx: use ap_bcast_hlid for recorded keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 32/40] wl12xx: don't remove key if hlid was already deleted Eliad Peller
2011-08-14 10:17 ` [PATCH v2 33/40] wl12xx: track freed packets in FW by AC Eliad Peller
2011-08-14 10:17 ` [PATCH v2 34/40] wl12xx: schedule TX packets according to FW packet occupancy Eliad Peller
2011-08-14 10:17 ` [PATCH v2 35/40] wl12xx: handle wrap-around overflow in released Tx blocks FW counter Eliad Peller
2011-08-14 10:17 ` [PATCH v2 36/40] wl12xx: enable AP advanced functionality Eliad Peller
2011-08-14 10:17 ` [PATCH v2 37/40] wl12xx: don't wait for disconnection event Eliad Peller
2011-08-14 10:17 ` [PATCH v2 38/40] wl12xx: set the AP-started flag only after setting keys Eliad Peller
2011-08-14 10:17 ` [PATCH v2 39/40] wl12xx: AP-mode - prevent Tx to stale/invalid stations Eliad Peller
2011-08-14 10:17 ` [PATCH v2 40/40] wl12xx: fix tx_queue_count spurious increment Eliad Peller
2011-08-22 11:11 ` [PATCH v2 00/40] wl12xx: move to wl12xx-fw-3 Luciano Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1313317059-16567-28-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=coelho@ti.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.